Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The signal is removed from the API; all references to it are removed
from documentation; the unit test that checks for its emission is
modified to listen for QThread::finished() instead.
The QThreadPrivate::terminated flag is also removed, as it served no
purpose other than to trigger the emission of QThread::terminated()
As discussed at http://lists.qt-project.org/pipermail/development/2012-October/007216.html
the signal is not guaranteed to be emitted after every termination,
rendering it useless.
Change-Id: I7b0c45d7889da0d33875545331606f2208ee56fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead omit the whole test when Q_OS_WINCE is defined.
Change-Id: Id6f4e65c994115b8bab45f9fbf21dd255d204ea6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This class belongs to QThreadPool/QRunnable more than to QtConcurrent, so
move to QtCore, where QThreadPool awaits it.
Change-Id: Ibf20288a986593bf779453427c2dae8db1e1423a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No compatibility header needed. While this wasn't marked as private API,
it wasn't documented, either.
This is a prerequisite for moving QFuture to QtCore.
Change-Id: I8e986e6e2a22fbe5cf08d0600ec39ae9ae993e20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
QElaspedTimer is a lot more efficient.
Change-Id: I66d9514108f800a45181d8960b01a5e7d3fa9e80
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test tries to acquire a semaphore that isn't ready, so it will
timeout. The test is working properly.
The only problem is that 10 ms is too strict. For a wide variety of
reasons, especially since the Qt CI system runs multiple tests in
parallel, the program may not run again in that 10 ms window.
Change-Id: Ic0f684895f73646db5f1cc783fe9ef75fb1ab02b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Just to make it clear which two sections go together.
Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is working, but let's just be sure by adding a testcase.
Change-Id: I8c6b5ded0c7b6c90645dbf70a7ce6c1ba447a284
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.
Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
The CI system is now using the parallel_test flag to run tests in
parallel. This test has become flaky, or at least more flaky than it
was previously. Mark it to no longer run in parallel.
Change-Id: I47bca3be620a8f648a0eb9c9b9f26d2d925efc01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.
If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.
Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It is an extension coming from the use case when you, for instance, need to
implement a countdown timer in client codes, and manually maintain a dedicated
variable for counting down with the help of yet another Timer. There might be
other use cases as well. The returned value is meant to be in milliseconds, as
the method documentation says, since it is reasonable, and consistent with the
rest (ie. the interval accessor).
The elapsed time is already being tracked inside the event dispatcher, thus the
effort is only exposing that for all platforms supported according to the
desired timer identifier, and propagating up to the QTimer public API. It is
done by using the QTimerInfoList class in the glib and unix dispatchers, and the
WinTimeInfo struct for the windows dispatcher.
It might be a good idea to to establish a QWinTimerInfo
(qtimerinfo_win{_p.h,cpp}) in the future for resembling the interface for
windows with the glib/unix management so that it would be consistent. That would
mean abstracting out a base class (~interface) for the timer info classes.
Something like that QAbstractTimerInfo.
Test: Build test only on (Arch)Linux, Windows and Mac. I have also run the unit
tests and they passed as well.
Change-Id: Ie37b3aff909313ebc92e511e27d029abb070f110
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Test that they do expand properly and don't produce errors. This is
templated code, so it doesn't get tested fully unless we instantiate
them.
Also check that the alignments are correct.
Change-Id: I2a8ee2165167f54b652b4227411e209850974b8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Create subdirectories containing profiles to avoid
problems with -fast.
- Use QFINDTESTDATA to locate binary.
- Make it a console application, no Mac-bundle.
- Add error messages to the test, give it a longer time-out
and ensure sub-process is killed if it hangs.
Change-Id: Ibc177b786c4bc8fdbc068a8c45f4801a41c9f660
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.
Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Mac, the application's dir is in the bundle, so we need to "escape"
the bundle when looking for the an executable relative to the
application's dir path.
Change-Id: I5c01f7d816ec8cc30f5277202f4eefb0c49a2bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.
Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.
SC-break-rubber-stamped-by: Lars Knoll
Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
if given char*, QCOMPARE will try to compare the strings pointed by the
char*
In this case, the char* just point to garbage, we just want to compare
the addresses.
(Was changed in commit 6fcfae99d3)
Change-Id: I9edb2b676aedf67a252aea6a41d56cd1eef7befc
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Commit f4b6628083 fixed it on windows.
Now test it work within QAtomicPtr
Change-Id: Ibf5c31a133d6d544a78ce626fac9085b73c97fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Bug trackers come and go, so using bug identifiers in function and test
case names will ensure that those names eventually become meaningless.
It is better to choose a meaningful name and provide explanatory
comments where appropriate.
Change-Id: I67c27782ef21b5d4eaab4854079a043c8ef6957b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
