From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When a high-priority event is posted in overrided
'QStateMachine::beginSelectTransitions', the event may be remained in
event queue, and be not dispatched until another event posted.
Change-Id: Ifda288d9c00ac7985e426b9cc02bda382ebaac35
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
[ChangeLog][QtCore][State Machine] Added constructor overload that
takes a pointer-to-member for the QSignalTransition.
Change-Id: I80ac6e16d0edf7d2ab09882b6f6db4cbd73364e1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Tests from corelib/tools were omitted in this change.
Change-Id: I4c8786d33fcf429d11b2b624c7cd89c28cadb518
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
It's just a test, but it's in the way of automatic tracking
of inefficient QLists.
Change-Id: I2dcfd81c9e208dab57bb256d7c276ad5303f196c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When there are conflicting transitions, a transition that is nested
deeper (i.e. more specific) has priority. If two transitions have the
same nesting level, the one that comes first in the document order gets
priority.
Before this patch, only the document order was considered.
Change-Id: I58f188c270cabe2c386a783ceef7a0a955105425
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The behavior of "external" and "internal" transitions is identical,
except in the case of a transition whose source state is a compound
state and whose target(s) is a descendant of the source. In such a case,
an internal transition will not exit and re-enter its source state,
while an external one will.
[ChangeLog][State machine] Added support for internal transitions.
Change-Id: I9efb1e7368ee52aa2544eb84709a00ae3d5350d3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
As nothing changes in the state machine when selecting transitions for
events and then calculating the exit- and entry-sets, some calculations
can be cached.
The exit set for a transition was calculated multiple times. First in
removeConflictingTransitions, where the two loops would each calculate
them multiple times. Then secondly in microstep(), which would calculate
the exit set for all transitions.
Transition selection, exit set calculation, and entry set calculation
all calculate the transition domain and effective target states for
transitions.
Change-Id: I217328a73db2f71e371eb5f60a0c7b222303f0ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- removed an unused field
- initialized variable that might be used uninitialized.
Change-Id: I7a7a063f025ecc32fa462dd8d5e2485c2ba52eb8
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Added the function pointer to addTransition to take
advantage of the new connect syntax.
[ChangeLog][QtCore][State Machine] Added an addTransition() overload that
takes a pointer-to-member for the signal triggering the transition.
Change-Id: Ic97f7983839217ca0c8484b269d38221cbe804e3
Task-number: QTBUG-40293
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Benign, but easy to avoid by allocating objects on the stack.
Change-Id: I1933d0abb2ebd53bcf0402f392e7e3c201756b9e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
This commit reverts c4cef6fae9.
The above fix for QTBUG-25958 (cloned in QTBUG-40219) is not
complete and introduces the regression QTBUG-30049.
Task-number: QTBUG-30049, QTBUG-25958, QTBUG-40219
Change-Id: I3c4b774dce06c13cb4e089f8413a7747cedfd212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is needed to control a QStateMachine object from QML.
Change-Id: I19271d97718af2d688c477647d6341f70fdef3ea
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
Commit f9a17d7f0f fixed it for the case
where the sender object is in a different thread at transition setup
time. However, it still didn't work if either the sender object or the
state machine was moved to a different thread at some later time,
before the machine was started.
Therefore: Bite the sour grape and traverse all the machine's
transitions when the machine is being started, registering those
signal transitions whose sender objects are in other threads.
This will increase the machine's startup time (proportional to the
number of transitions), but at least it works in all known scenarios,
meaning we don't have to document weird restrictions regarding the
order in which the user's operations have to be done.
Task-number: QTBUG-19789
Change-Id: I5f1dd1321994e49635f52be65cf56d2678ed1253
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The SCXML spec states that entry order should be equivalent to
"document order" and exit order should be "reverse document order".
Since QStateMachine uses child order for the entry order, the exit
order should be reverse child order.
Change-Id: Ia7b05fdd5c9261ccf202f64f8d23f5c88b20a8c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This makes it possible to add API for setting the restore policy
per state, or even per property assignment (QTBUG-17861).
This change is fully source compatible with Qt4.
Change-Id: I53628546b070f6fc84891f86e7ad7bd8ef5ba285
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Back when QStateMachine was changed to inherit QState, this
constructor was conveniently left out because setting the state
machine (root state) to be a parallel state group didn't actually
work. But as of commit d281aa6936,
it does work, so add the missing constructor.
Task-number: QTBUG-15430
Change-Id: I68c599baa0ef1bfc869195140cf5daf645e75b8b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Since Qt's connections are thread-safe, QStateMachine's plumbing
around them should be thread-safe too.
Change-Id: I8ae91c2edc2d32ca4ed4258b71e5da22de30ed91
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
By default, QStateMachine lazily registers signal transitions (i.e.,
connects to the signal) when the transition's source state is
entered. The connections are established in Qt::AutoConnection mode,
which means that if the sender object lives in a different thread,
the signal processing will be queued.
But if a sender object's signal is used in an out-going transition
of the target state of the queued transition, it's possible that a
second signal emission on the sender object's thread will be
"missed" by the state machine; before the machine gets around to
processing the first queued emission (and registering the
transitions of the new state), a sender object on the other thread
could have emitted a new signal.
The solution employed here is to eagerly register any signal
transition whose sender object is on a different thread; that is,
register it regardless of whether the transition's source state is
active.
Conversely, when a machine's transitions are unregistered (i.e.,
because the machine finished), signal transitions with sender
objects on other threads should be left as-is, in case the machine
will be run again.
This doesn't solve the case where the sender object is moved to a
different thread _after_ the transition has been initialized.
Theoretically, we could catch that by installing an event filter
on every sender object and handle the ThreadChange events, but
that would be very expensive, and likely useless in most cases.
So let's just say that that case isn't supported for now.
Task-number: QTBUG-19789
Change-Id: Ibc87bfbf2ed83217ac61ae9401fe4f179ef26c24
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Some of the transition constructors didn't call the maybeRegister()
function, causing the transitions to be ignored if they were created
when the state machine was running and the transition's source state
was active.
Added tests that cover all possible cases.
Change-Id: If1b593b127bd719e3be4e5a2e6949a780c4e97c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The originalSignalIndex member was not set if the signature had to be
normalized. This caused the SignalEvent passed to onTransition() to
report a signal index of -1.
Improve the signal transition tests so they check both the event
passed to eventTest() and onTransition().
Change-Id: I5331fd1944d53310b6d11eb2fd8713b80faa53a1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the same trick as used for private signals in the models.
Change-Id: I4235788490cae0e3d554565621d145652dc5b0ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
