This patch implements an iterator that returns a pair containing both the
key and the value of an entry in QHash/QMap.
[ChangeLog][QtCore][Containers] Added an stl-like iterator to go through
QHash/QMap returning both the key and the value of the element pointed to.
That lets QHash/QMap interoperate better with stl's algorithms like
std::set_union.
Change-Id: Idbf8a8581510b3493648c34ab04c556de9fa4aa7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing QHash::operator== does not work when the same
keys appear in different order between the two hashes being compared.
However, relying on iteration order on a QHash is (as usual) a bad
idea and one should never do it.
Task-number: QTBUG-60395
Change-Id: Ifb39a6779230e26bbd6fdba82ccc0247b9cdc6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The hash function is carefully designed to give the same result
as the straight-forward implementation of qHash(unordered_map),
which we'll probably add at some point, namely: std::accumulate
over a container of std::pair.
This is one reason to use std:: and not QPair in the implemen-
tation of qHash(QHash). The other is that qHash(QPair) uses a
bad hash combiner, which may xor out the 'seed' from the result.
We can't fix that until Qt 6, but the qHash(std::pair) overload
uses the well-known boost::hash_combine algorithm (implemented
in Qt as QtPrivate::QHashCombine), so we can use that.
I also trust std::pair to work without problems with reference
template arguments, while QPair only very recently gained a very
basic auto-test for reference parameters.
[ChangeLog][QtCore] Added qHash() overloads for QHash, QMultiHash.
Change-Id: I90879d8a99cf1aadb6e84ecc0c3704f52f3691da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The C and C++ standards say it's undefined whether the preprocessor
supports macros that expand to defined() will operate as an ifdef.
Clang 3.9 started complaining about that fact.
One solution was to change QT_SUPPORTS to check for zero or one, which
means we need to change the #defines QT_NO_xxx to #define QT_NO_xxx 1.
The C standard says we don't need to #define to 0, as an unknown token
is interpreted as zero. However, that might produce a warning (GCC with
-Wundef), so changing the macro this way is not recommended.
Instead, we deprecate the macro and replace the uses with #ifdef/ndef.
Change-Id: Id75834dab9ed466e94c7ffff1444874d5680b96a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Similar to QMap::equal_range().
Will allow to easily fix inefficient code such as:
foreach (auto value, hash.values(key)) { ... }
[ChangeLog][QtCore][QHash] Added QHash::equal_range()
Change-Id: I6e19e25de632e897ad83d3141d9d07f0313f7200
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
This is in preparation of adding more qHash()-related tests.
Change-Id: Iae65bf8b123e1d6ac6d1eb34d74ba4eb9df8173c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a test that checks that QHash keeps the first of the keys
that compare equal. This may or may not be documented, but is
inconsistent with the values in a QHash, where the last element
with equal key is kept.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_map).
Do the equivalent checks in tst_QMap, too. There, of course,
instead of equal keys, check equivalent ones.
Change-Id: I2c5f04f8e8a6bbc7dbaadadd878a4c876e4df042
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: Ia284d093cd0029432372630e81657fb687b9516f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The ability to set a container to be unsharable has very little use and
it costs us an extra conditional for every refcount up and possibly
down.
This change is a no-op for current Qt 5. It shuffles a few things around
just so Qt can compile if you define QT_NO_UNSHARABLE_CONTAINERS. That
is done to ease the fixing of the code in Qt 6 and to make my life
easier: I'll keep that defined in my local Qt build so I can catch any
misuses of this deprecated API.
The newly deprecated methods are not marked QT_DEPRECATED because the
bootstrapped tools wouldn't build -- they're built with QT_NO_DEPRECATED
defined, which causes build errors.
[ChangeLog][QtCore] The setSharable() and isSharable() functions in Qt
containers has been deprecated and will be removed in Qt 6. New
applications should not use this feature, while old applications that
may be using this (undocumented) feature should port away from it.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: I789771743dcaed6a43eccd99382f8b3ffa61e479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Unit-test this by making the QList, QVector, QHash and QMap unit tests
be duplicated under strict-iterator mode. There's no test for
QLinkedList.
The tst_Collections test does not compile under strict-iterator
mode. It generated over 15000 errors when I tried.
The strict iterators required a small change: the difference_type
typedef needs to match the operators that get distances
(operator-(iterator)) and move the iterator around (+, -, +=, -=, etc.).
Task-number: QTBUG-29608
Change-Id: I834873934c51d0f139a994cd395818da4ec997e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Most fixes are simple and quite obvious. The ones more involved are
the ones to QArrayData, which had probably not been compiled with
strict iterators thus far.
Change-Id: Ic4ff84c34fd9a04fd686fecaa98149b1c47c9346
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The key returned by QHash::key is an arbitrary one that maps to the
given value. The test instead relied on it being a specific one.
Change-Id: I090351797e8b52036d78160fd810518a11e8107d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a qHash overload taking two arguments: the value to
be hashed, and a uint to be used as a seed for the hash function
itself (support the global QHash seed was added in a previous patch).
The seed itself is not used just yet; instead, 0 is passed.
Compatibility with the one-argument qHash(T) implementation is kept
through a catch-all template.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I1d0a84899476d134db455418c8043a349a7e5317
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove references to the old bug tracker. The data from the old bug
tracker is no longer accessible, so these markers are meaningless.
Change-Id: Ib9d029d52b70fd0a512b9532d65f03763eabfe57
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored code verifies the following statement in the documentation
of QHash::find():
"If the hash contains no item with the key, the function returns end()."
It is not clear why the code was commented-out in the first place, as
this occurred before the tests were imported into the Qt repository in
2006.
Change-Id: I745393a8e3e728fc60009da07abd038a3d56e99c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove various disabled and/or non-helpful debugging code.
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure. Diagnostics should also be informative -- simply
printing the value of a variable with no other information about what is
being printed (or why it is being printed) is not informative.
Change-Id: I21a6c2121be86001bb57e80f426507b6e619ee9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Functions that modify the d-pointer must detach or otherwise take
measures to not modify the const, read-only shared_null.
The setSharable(bool) function takes care to detach when setting
sharable to false, but should avoid setting the sharable data member
unless d is not the shared null.
Similarly, QMap<Key, T>::setInsertInOrder() needs to detach if it is
shared with the shared_null (the logic has been updated to be the same
as setSharable()).
Change-Id: Ida5cb9818b86695f1b9f0264418b955c56424898
Reviewed-on: http://codereview.qt-project.org/5929
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
