Qt already supports high DPI icons using the “@nx” approach, where the
device pixel ratio that the image was designed for is in the file
name. However, our implementation of the freedekstop.org Icon Theme
specification did not support the Scale directory key:
https://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html#directory_layout
This meant that users creating icons via QIcon::fromTheme() did not
get high DPI support. This patch fixes that.
[ChangeLog][QtGui][QIcon] Implemented support for Scale directory key
according to Icon Theme Spec. Icons created via QIcon::fromTheme()
now have high DPI support by specifying the Scale in the appropriate
entry of the relevant index.theme file.
Task-number: QTBUG-49820
Change-Id: If442fbc551034166d88defe607109de1c6ca1d28
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QImage::reinterpretAsFormat can be used to change the format of an image
without converting the data, to correct wrong formats or narrow the
format to an opaque one if found to be opaque.
[ChangeLog][QtGui][QImage] A new method reinterpretAsFormat is has been
added to change the format of a QImage without converting the data.
Change-Id: I5e15bc5a1c474a35d3921b06299008ab2effd945
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
- port Q_FOREACH to C++11 range-for
- port uses of inefficient QLists to QVector or C arrays
- port uses of dynamic containers with static content, to constexpr
C arrays
- fix algorithmic mistakes:
* use adjacent_find with greater<> to emulate C++11 std::is_sorted
instead of sorting the range and comparing it with the original
(and not even using stable_sort to do this).
* use std::unique == end() to detect absence of duplicates instead
of poplulating a QSet and comparing its size with that of the
original range.
* use a simple QCOMPARE instead of populating a QSet with statically-
known content, removing known options to be able to check that the
remaining options are unknown
Fixes errors pointed out by my tree's static checks.
Change-Id: I935dbc21d56b55889d96aaf6ec179624c6ce9047
Reviewed-by: David Faure <david.faure@kdab.com>
Private Use Area characters are quite valid input characters when used
in combination with a custom font. Joiners also serve an important language
purpose in semitic writing systems.
Note that there is a hack where we disregard any character produced
using CTRL or CTRL+SHIFT specifically because of German keyboards. I have chosen to
keep the hack in this patch to limit the change (though I have made an exception
for ZWJ and ZWNJ since both are produced using Ctrl+Shift on Windows), but it
will probably have to be reverted.
[ChangeLog][QtWidgets][Input] Accept characters in Private Use Area, as well as
zero-width joiners and zero-width non-joiners in input in QLineEdit and QTextEdit.
Task-number: QTBUG-42074
Task-number: QTBUG-57003
Change-Id: I73f3b7d587a8670de24e902dc52a51f7721dba5a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The ARGB32PM code-path doesn't have enough precision to accurately
render ARGB32 images, but the RGB64 code-path does. Since this is
already a slow configuration and the most costly part is the conversion
we can switch to the more accurate code-path for little cost.
Task-number: QTBUG-55720
Change-Id: Ifa0afba8d8cc0c2f699bb91f51726f4ee5228f3e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Throw out unused code and simply format table to only care about bpp
and use it consistently for all bpp.
Also makes QImage use the 180 degree memrotate, and fixes the tiled
packed qt_memrotate270 so it can be put to use.
Change-Id: If4ef1666fca960ce8e4ce32d85dc5f347b6986f4
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Commit 2bc7a40048 taught the CoreText font database to populate the
families lazily, and in the process added a guard to ensure that we
didn't populate internal fonts (prefixed with a '.'), as these fonts
would then show up in font selection dialogs.
Commit 909d3f5c7 then added support for private fonts, by making it
possible to filter out any private fonts from font selection daialogs.
But the guard was not removed, so we were still not populating these
fonts. This guard has been removed, and the filtering function has
been updated to include the conditions of the guard.
Next, commit e5e93345c5 used [UIFont fontNamesForFamilyName:] to verify
that each family that we registered with the font database would also
have matching fonts when finally populated. This is not the right approach,
as [UIFont fontNamesForFamilyName:] does not handle internal fonts.
Instead we trust what CTFontDescriptorCreateMatchingFontDescriptors()
gives us, but make sure to register the resulting font descriptors
with the original/originating font family, instead of the one we pull
out of the font descriptor.
Finally, as of iOS 10, we can use CTFontManagerCopyAvailableFontFamilyNames
instead of [UIFont familyNames], which gives us all of the internal font
families like on macOS, instead of just the user-visible families. For
earlier iOS versions we manually add '.PhoneFallback', as we know it
will be available even if not listed in [UIFont familyNames].
The end result is that we register and populate families like '.PhoneFallback',
which is critical to supporting more esoteric writing systems.
The check in tst_QFont that styles for a given family is not empty has
been removed, as we can't guarantee that on all platforms, which is
also documented for QFontDatabase::styles().
Task-number: QTBUG-45746
Task-number: QTBUG-50624
Change-Id: I04674dcb2bb36b4cdf5646d540c35727ff3daaad
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The function was incorrectly handling green and blue color channels
causing them to be dropped. This affects drawing non 32-bit images onto
10-bit per color channels formats such as RGB30.
Change-Id: I9211e253b1a9da0dada5c418d592a8f531265989
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Several people agreed that the name was confusing and that this one
is better.
Task-number: QTBUG-54616
Change-Id: I31cf057f4bc818332b0551a27d1711599440207c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
The alpha channel of an RGB32 image was not properly ignored when doing
blending with partial opacity.
Now the alpha value is properly ignored, which is both more correct
and faster. This also makes SSE2 and AVX2 implementations match NEON
which was already doing the right thing (though had dead code for
doing it wrong).
Change-Id: I4613b8d70ed8c2e36ced10baaa7a4a55bd36a940
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
- Declare as Q_MOVABLE_TYPE
- Prevent QList<QPointerUniqueId> from being instantiated
(use QVector instead)
- Add equality relational operators
- Add qHash() overload
- Replace non-default ctor with named ctor.
- Add Q_DECL_NOTHROW.
- Add Q_DECL_CONSTEXPR.
- Rename numeric() -> numericId().
- Update docs.
The extension vector for this class calls for additional
properties to be added later, but these are not user-
settable. It thus suffices to rely on the only data
member, a qint64, which can be reinterpreted to an index
into an array or hash with actual objects. This allows
to make the class a Trivial Type (ie. no overhead over
an int) while still supporting later extension. Cf.
QSslEllipticCurve as another example of such a class.
The extension has to maintain the following invariants,
encoded into user code by way of being used in inline
functions:
- m_numericId == -1 <=> !isValid()
This is trivial to support. An extension could not and
still cannot reinterpret the qint64 member as a d-pointer,
but a d-pointer is only necessary for user-settable
properties where updating a central private data structure
would cause too much contention.
Add a test.
Since this type is used in other modules, keep the existing
functions, but mark them as deprecated with the expectation
that these compat functions be removed before 5.8.0 final.
Task-number: QTBUG-54616
Change-Id: Ia3ede0ecaeeef4cd3ffa94a72b1050bd409713a5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We parse the EXIF header in order to get the proper orientation, so
let's be a bit more careful in what we accept. This patch adds better
handling for reading past the end of the stream, plus it limits the
number of IFDs read (to avoid processing too much data) and deals with a
pathological case of the EXIF file format: EXIF (due to its TIFF
origins) permits the offset to the next IFD to be backwards in the file,
which means it could result in a loop or pointing to plain corrupt data.
We disallow any backwards pointers, since it seems that's what other
decoders do (libexif, for example).
Change-Id: Iaeecaffe26af4535b416fffd1489332db92e3888
(cherry picked from 5.6 commit 02150649f95b8f46f826e6e002be3fa0b6d009bc)
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Turns the two set of tables in QDrawHelperGammaTables into two
QColorProfile classes that use similar structures and can be reused for
other gamma correction.
At the same time clean-up and improve the comma-correct blending code
to use the new profiles and QRgba64 precision.
Change-Id: I302bd87a5c836e1010fff6d633eeb56fd4ae2ff0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Looks up the canonical names of enumerated fonts and register them under
their preferred names if present.
Also changes the logic handling registration of english aliases, so it
is always done, even if it might in rare cases cause a double
registration since that is safe.
Task-number: QTBUG-53458
Change-Id: Ia010774b26072192b55697b717cc37442c852881
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Tests are not supposed to write into the build/application directory,
but rather should output to the temp directory.
Change-Id: Idcdf51226a2d547514aea2fbb2054998d8a3437e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
No-break-spaces should not be counted in the space data, but rather
be treated as any other non-breakable character. We were already
taking care of this in the loop we reach if the item starts with
a character which isn't whitespace, but there is a second loop for
items that begin with whitespace characters.
The result of this was that in certain circumstances where you gave
the nbsp its own format and made the line wrap, the previous line
would count an extra trailing space and it would swallow the first
character in its following line.
[ChangeLog][QtGui][Text] Fixed a bug where a no-break space would
sometimes cause the first character of the containing line to not be
displayed.
Task-number: QTBUG-56714
Change-Id: Idd760a389052e6de70f6cc397122b217987fa5f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were throwing away important information by claiming that all
fonts support all the standard sizes in QFontDatabase on Windows
This caused the font dialog to list unsupported sizes for bitmap
fonts, unlike the native font dialog.
We would also claim to support creating bitmap fonts at
unsupported sizes, which would lead to
1. QFontInfo(font).pointSize() would return the requested size,
not the actual rendered size.
2. Bitmap fonts created at 64 pixels and higher would be invisible.
On Mac, there are no system bitmap fonts, and the use is not very
common, but installing some bitmap fonts on the system, it does
seem to ignore the sizes supported in the font and just displays
the standard list instead, so we keep the current behavior there.
[ChangeLog][QtGui][Text] Fixed list of supported sizes for
bitmap fonts on Windows.
Task-number: QTBUG-56672
Change-Id: Idbec2db9eb3381ab5ddf6259bd2befcba9b93564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is second attempt of change cd26e66c2e
This allows us to not have conflicts between the point ids between
different devices for QtQuick pointer handlers.
We do this in QtGui because we can then safely compare point ids from
QTouchEvent::TouchPoint and QQuickEventPoint.
(Point ids that QtQuick pointer handlers use will be based on the point
ids provided by QTouchEvent::TouchPoint::id)
[ChangeLog][QtGui][QTouchEvent][Important Behavior Changes]
Touch point ids are now unique even between different devices. As a
consequence of that, you cannot anymore assume that
QTouchEvent::TouchPoint::id has the same value as given by the native
platform nor the same value as given by synthesized touch points.
Change-Id: Iad2fd8c6a43ccc571a227a01134a1e8f829dfaf4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Same behavior as QWidget, and allows platform plugins to maintain order of
native windows based on the QWindow hierarchy, instead of having to manually
keep track of window levels.
Change-Id: Iacc7e9ee2527f0737c9da6debc7cec101064f782
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
With the client message _NET_ACTIVE_WINDOW, not all window managers
will pass focus from a child window to its root window, Detect this
child-to-root case, and use xcb_set_input_focus() instead.
Task-number: QTBUG-39362
Change-Id: Ib32193018e3b725b323f87d7306c9ae9493d78a7
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The QTextDocument::toPlainText() converts some characters in the
text to ASCII, which can be problematic for use cases where you
want to save the precise contents of the document, e.g. in
Qt Creator. Since we don't want to change the behavior of
toPlainText(), we introduce a new function which returns the
raw text contents of the document instead, with no modifications.
[ChangeLog][QtGui][Text] Added QTextDocument::toRawText() function.
Task-number: QTBUG-56538
Change-Id: Ib6c48a16551c4c71c4c431760f993793d1af6806
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fixes the test for width of condensed fonts so it doesn't depend
on the presence of the Liberation font on the system, and adds
another test that condensed sub-families can be matched
consistently. The latter will however not work on Windows until
QTBUG-53458 is solved.
Task-number: QTBUG-51335.
Change-Id: Id6d046274fa21b2dce0ad6b32dce7f1c8a92a4f4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously when a new QOpenGLFramebufferObject was bound, the
QOpenGLContextPrivate::qgl_current_fbo member was also updated to point
to this new object.
But if a user called QOpenGLFramebufferObject::bindDefault(),
qgl_current_fbo was not unset, meaning that if the FBO object would be
deleted at some point, qgl_current_fbo would be a dangling pointer.
This patch makes sure to clear the value of qgl_current_fbo when
bindDefault() is called. It is cleared, and not set to point to another
object because the default platform OpenGL FBO is not backed by a
QOpenGLFramebufferObject.
Task-number: QTBUG-56296
Change-Id: I68b53d8b446660accdf5841df3d168ee2f133a90
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Also bump minimum required Qt version for Android: Ministro updates.
Conflicts:
src/android/java/src/org/qtproject/qt5/android/bindings/QtActivityLoader.java
src/android/java/src/org/qtproject/qt5/android/bindings/QtLoader.java
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: I966f249bebf92da37bfdeb995ad21b027eb03301
Clip the transformed and rounded sourceClip to the source rectangle,
so we don't try to rotate pixels outside the source.
Task-number: QTBUG-56252
Change-Id: Ib9cb80f9856724118867aea37ead0b02a6c71495
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
... and avoid detach()ing potentially large data for just
preserving the QPlatformPixmap::pixelType().
A QBitmap differs from a QPixmap (its base class, urgh)
by always having a data != nullptr and a Bitmap pixel
type, yet load() was unconditionally setting 'data' to
nullptr on failure, turning a QBitmap into a non-QBitmap.
Fix by move-assigning a null QBitmap instead of resetting
'data'.
Add some tests.
Change-Id: Ida58b3b24d96472a5f9d0f18f81cc763edcf3c16
Reviewed-by: Anton Kudryavtsev <a.kudryavtsev@netris.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The layout isn't actually created until endLayout() or setLineWidth() is
called. So in the case where this was not done, the height of the line
would be 0, thus multiple lines would be placed on top of each other, at
y == 0.
[ChangeLog][QtGui][Text] Fixed QStaticText when manually breaking lines
and no text width was set.
Task-number: QTBUG-56346
Change-Id: I7f6ed6260545882f05fe39b21134315eca7401b9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
After e109b8a0f3, it is possible
that the cache will be flushed as a result of inserting a new
font rather than just when the timer event triggers. When doing
superscript and subscript text layouts, we would first get
a regular font engine, then a scaled one, and then reference
the regular font engine *after* getting the scaled one. If the
regular font engine was deleted as a result of inserting the scaled
one, we would get a dangling pointer and crash.
The situation was improved by 49926bb9ef.
You would now to switch between 256 different fonts in the layout
in order to trigger it. The test in the commit will trigger the
crash even with this change.
[ChangeLog][Qt Gui][Text] Fixed a crash that could happen if you
were doing many different text layouts with different fonts
and superscript or subscript alignment.
Task-number: QTBUG-53911
Change-Id: Ia33108252e030eff25924ef1b7c10b9d59b5bc8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
