We now treat -o foo/bar/baz as a request to generate the output in the
foo/bar directory with baz as the output name, or if foo/bar/baz is already
a directory, in the foo/bar/baz directory with the default output name.
We take care to handle generator specific directory structures, so
that the project directory does not get merged into OUT_PWD. This is
done in runQmake(), before parsing the project file, so that OUT_PWD
will be correct during project parsing. The individual generators are
then passed the filename relative to the final output directory.
Each generator now also makes sure to add the right project suffix
to the output file, so -o foo will result in foo.pro or foo.vcproj,
instead of just foo.
Task-number: QTBUG-44408
Change-Id: I26990cec0c0458bee2b88dbb86322617a85f54b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Makes it a bit more clear why all the Xcode settings were lost.
Task-number: QTBUG-45113
Change-Id: I3b19edb02a24673f56e77d3a1fb7cc76584c73fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
CONFIG+=lrelease enables that all .ts files in
TRANSLATIONS or EXTRA_TRANSLATIONS are compiled by
lrelease.
EXTRA_TRANSLATIONS is a new variable that is only
processed by lrelease, but not lupdate - this
is useful for translation files that are supposed to
be empty, because they match the language of the
original translation sources.
If embed_translations is also set, the generated .qm
files will be made available through the Qt resource
system under :/i18n/. Alternatively, the user can
specify an installation target by setting
QM_FILES_INSTALL_PATH.
Note that relative paths in TRANSLATIONS are not taken
into account. That is,
TRANSLATIONS = component1/de.ts component2/de.ts
will cause a conflict.
[ChangeLog][qmake] New CONFIG options lrelease and
embed_translations were added. CONFIG+=lrelease does
run lrelease on translation files listed in TRANSLATIONS
and EXTRA_TRANSLATIONS. CONFIG+=embed_translations does
include the generated .qm files as resources under
:/i18n/.
Change-Id: I94db5b8431d07b24f59b2c332ede91450f9c0c58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this allows for dynamic generation of the dependencies.
Task-number: QTBUG-61267
Change-Id: If5b8aed6b9e4bde189cc3ba6a5f13dcf8def3a1e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's 160ish lines and adequately isolated. Still, it *might* be
contributing to compilers being slow (unlikely though that seems) so
seemed worth tidying up anyway.
Task-number: QTQAINFRA-2117
Change-Id: I9e55e677552c273fdf3480ccefc229fd6fd2b66a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Xcode project name may be affected by e.g. the -o argument to qmake,
so we can't assume it's based on the target.
Change-Id: Ibb9f4265017ffcfe26bd8734758dcb30237c704f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the variables are quoted correctly for commands, which is incompatible
with quoting for dependencies under mingw. so insert the paths as
literals, where we can control quoting.
this fixes building in directories with spaces, which i broke in
7c34e0a7b by using different quoting styles for deps and commands in the
first place.
this breaks the hypothetical use case where somebody wants to override
TARGET or DESTDIR (or DESTDIR_TARGET under windows) on the *make*
command line. not sure why anyone would do that - just do it at the
*qmake* level.
we did not get rid of OBJECTS, because that would cause significant
duplication in the makefile (not that it would matter too much, given
the dependency lists ...). this isn't a problem, because these are
short relative paths which are not expected to contain "funny"
characters.
an alternative would have been to change the variables' quoting and
eliminate them from the commands instead, but that would be
backwards-incompatible, because commands are "user-servicable".
for the same reason, we cannot get rid of the variables entirely.
Change-Id: Ic7592c7fc67d8b7d2b64de80808365cd1c3f79d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
under windows, libraries can have a numeric suffix derived from VERSION,
and (under MinGW) a unix-like "lib" prefix - neither of which .prl files
have. therefore, we had to make the back-mapping from the library to the
.prl file reverse-engineer the original TARGET's name. we verify whether
we actually got the right file by comparing the target specified inside
the .prl file with what we started from.
this fixes linking of transitive deps of static deps.
the alternative of changing the .prl naming pattern to avoid the
back-mapping was discarded, as a) it would be backwards incompatible and
b) it would break project-internal -lfoo references to versioned libs.
Change-Id: Ia9b899fe6a5700fee528bd1dacf130caf083cdd6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
if the file name contained no dot, but the path did, we'd chop up the
path in a final (doomed) attempt at locating a .prl file.
Change-Id: Iad72428d8523f2ea7e543faa58225fba4ffa358b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
add a parameter that indicates whether the passed filename can be only
the basename of a prl file. if so, we can skip the other attempts at
interpreting the file name. that's not only faster, but also clearer.
Change-Id: I6f6da3f4485216021282a08acaefb53e60e7242a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
move the logic for trying different extensions to
MakefileGenerator::processPrlFile(), which is the only user of that
functionality. that makes findLib() rather trivial and a bit of a
misnomer, so rename it to checkLib().
Change-Id: If9738cc17367452853ab8d3866fa36b5d4b57213
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
only .prl is actually supported (and we expect this to remain the case),
so just simplify the code.
Change-Id: Ia23f9f257bf89ca214c3deabd8a7744b155c7aa9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in principle, it would be good to be able to read libtool .la files as
an alternative to our "proprietary" .prl files. however, this code was
disabled 15 years ago, three months after being written and never
released, and apparently no-one was missing it.
Change-Id: Ib8b4b4017b6a611f78af4e357ebce4006567e6ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this code operates way below the level integrating with a package
manager makes sense. consequently, remove the "TODO item".
support at a higher level is actually implemented anyway.
Change-Id: I8e1e43911dd40aa7585e49c1ad1e37b999779308
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For some reason, the solution generator was looking for the xcodeproj
files in the source tree. It should look for them in the output tree
instead.
Task-number: QTBUG-69244
Change-Id: I7525886d614ddfdee705b27aacafc8f90a6f9d1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the code ensures that the path ends with a path separator, which is
unhealthy under mingw when the command ends with that path, because it's
interpreted as a line continuation.
the easiest fix is just duplicating the name of the moved file to the
destination side.
the cleaner fix would have been cleaning up the path separator mess, but
that's a more invasive change and doesn't seem worth it.
Task-number: QTBUG-69255
Change-Id: I338f8997b84ed7049b5665872dd25f90b9d4d16a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qmake accidentally replaced all occurrences of the library name in the
build path. This would lead to problems if the (shadow) build path also
contains the library name.
Task-number: QTBUG-69279
Change-Id: If99acccc779ff0874433b193be7e7fc53625b245
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The compiler was generating some vectorized code for qresource.cpp but
it wasn't very efficient. So improve upon it and make use in other
places where we read UTF-16BE strings.
[ChangeLog][QtCore] Added an overload of q{To,From}{Big,Little}Endian
that operates on a memory region.
Change-Id: I6a540578e810472bb455fffd1531fa2f1d724dfc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
make sure the access is properly scoped and does not recurse.
Change-Id: Iaa345cd2771811281b9ed6f634c70235a78c3c33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
these characters can appear in file names, but are meta characters in
dependency context. they have different semantics in make commands, so
this required some reshuffling in the windows generator (which just
treated dependencies and commands the same way).
we don't actually escape colons for nmake, because it has magic
treatment of drive letters anyway (and colons cannot appear elsewhere).
also, if a target's filename gets quoted, batch rules will blow up.
therefore, "funny" file names are really only supported as inputs -
which is just enough to make resource embedding work.
Task-number: QTBUG-22863
Task-number: QTBUG-68635
Change-Id: I473b0bf47d045298fd2ae481a29de603a3c1be30
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The macOS framework build of Qt copies headers to each
framework instead of a centralized include location.
Update the .pc file generator to match this behavior.
Add two include paths to the .pc files:
-Ipath/to/lib/foo.framework/Headers
This makes #include <FooHeader> work.
-Fpath/to/lib
This makes #include <Foo/FooHeader> work.
Task-number: QTBUG-35256
Change-Id: I013ce161c904fe6b7bbb03e33c163d32fdda0647
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
/System/Library/Frameworks is now under system integrity protection
and is not usable for 3rd-party framework installs.
/Library/Frameworks continues to be a documented framework install
locaton.
Change-Id: I26f96ed57985218452ebbf9578e08f04b4e5cfd8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The QMAKE_MANIFEST variable was ignored for VS linkers that support
the /MANIFEST:embed option.
Task-number: QTBUG-59967
Change-Id: I1cdb60ec3a7a5f117942952d4632378ff142daa5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The default value for CONFIGURATION_BUILD_DIR includes EFFECTIVE_PLATFORM_NAME,
but when overriding it in 554e44b77 we only used the CONFIGURATION variable.
This left the .app in iOS builds in Debug instead of Debug-iphoneos,
breaking deployment from within Qt Creator, which had this directory
hard-coded.
We now include EFFECTIVE_PLATFORM_NAME to restore the original
destination for the .app bundle.
Task-number: QTBUG-68705
Change-Id: If304193d3e351e19fb84d250a62ae331af6966c6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
... and make it explicit where we can't do that for semantical or
backwards compat reasons.
most urgently, this fixes an assertion failure when $QMAKEFEATURES
contains empty paths (e.g., due to a trailing semicolon).
notable observation: QByteArray::split() has no argument for the split
behavior (it always keeps empty parts).
Task-number: QTBUG-47325
Change-Id: I72d4b2e154a2ed1802cfa98fb4a5211a68e43231
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The output directory may be the same as the source directory in
the case of an in-source build, but Xcode treats the SYMROOT as
a build directory, and automatically excludes it from Time Machine
backups, which may result in not backing up sources.
Instead we map SYMROOT to an .xcode subdirectory of the output
directory, and then use CONFIGURATION_BUILD_DIR to make sure
the final build targets end up where they used to.
Task-number: QTBUG-52474
Change-Id: I3852ca9088e75ca62fca4c1217b5485175d9436f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
the dependency paths are fixified against the output directory, so we
must resolve them accordingly.
Change-Id: Id92750aad358153bd2db5daca3194c54eda58dbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We need to take into account the presence of a possible ',_debug' suffix.
Change-Id: I5655394b78723bbc6cc32e56849acc2366d288e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
