qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslCertificate), so
make it public.
Also, the implementation in qsslsocket_winrt.cpp simply hashed
the handle(), which violates the principle that equal instances
must hash to the same value. Also, for some platforms, the
implementation returns nullptr unconditionally, which, while not
violating the above-mentioned principle, will make all users of
the hash have worst-case complexity.
To calculate a meaningful hash, therefore, the certificate needs
to be inspected deeper than just the handle.
For OpenSSL, we use X509::sha1_hash, which also X509_cmp uses
internally to determine inequality (it checks more stuff, but
if X059::sha1_hash is different, X509_cmp() returns non-zero,
which is sufficient for the purposes of qHash()). sha1_hash may
not be up-to-date, though, so we call X509_cmp to make it valid.
Ugh.
For WinRT/Qt, we use the DER encoding, as that is the native
storage format used in QSslCertificate. This is not equivalent
to the implementation used in qsslsocket_winrt.cpp before, but
since handle() == handle() => toDer() == toDer(), it should not
be a problem.
[ChangeLog][QtNetwork][QSslCertificate] Can now be used as a key in QSet/QHash.
Change-Id: I10858fe648c70fc9535af6913dd3b7f3b2cf0eba
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
ASAN report:
READ of size 8 at 0x606000011990 thread T0
#0 0x505e3b in EnterTestMainDialog::eventFilter(QObject*, QEvent*) tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10294
[...]
0x606000011990 is located 48 bytes inside of 56-byte region [0x606000011960,0x606000011998)
freed by thread T0 here:
#0 0x2b8df3551c79 in operator delete(void*) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:92
#1 0x418ab5 in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10276
previously allocated by thread T0 here:
#0 0x2b8df3551739 in operator new(unsigned long) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:60
#1 0x4188cf in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10272
EnterTestMainDialog::eventFilter() checks for nullness of 'modal'
before accessing it, but buttonPressed() did not reset 'modal'
to nullptr after deletion.
Change-Id: I65562a29f8264a6996d7d615e06de1d1afb5af53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
[ChangeLog][Important behavior changes][QSettings]
QSettings::value() now returns an invalid QVariant
when passing an empty key. The code path ran into
an assert, which was only noticeable in debug
builds.
Task-number: QTBUG-41812
Change-Id: I5cc32be3aa267a132e9d6639ecd6cb0bbafc15b0
Reviewed-by: Stéphane Fabry, Cutesoft <stephane.fabry@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implementation was inconsistent with QString::right(),
and did not return the N rightmost characters but actually did
the same as QString::mid(N) (returning the rightmost size - N
characters.)
Since this function is fairly recent (Qt 5.2), is documented to
behave the same as QString::right(), and since these APIs are
meant to be interchangeable, this needs to be fixed, even though
it changes behavior.
[ChangeLog][Important Behavior Changes] Changed QStringRef::right()
to be consistent with QString::right(). The function now returns
the N right-most characters, like the documentation already claimed.
Change-Id: I2d1cd6d958dfa9354aa09f16bd27b1ed209c2d11
Task-number: QTBUG-41858
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The check for Qt::Key_A to handle selectAll was changed to directly
compare to QKeySequence::SelectAll as this will only match Ctrl. The
former implementation also triggered when e.g. Shift was pressed.
Added a check that selectAll is only called when selection is not
disabled, i.e. selectionMode=NoSelection.
Added a unit test for selectAll().
Task-number: QTBUG-26687
Change-Id: I721e7ab590b55d7d754b3b74ef01756fa5aa1315
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The setMimeData() function is documented to take ownership of
the object passed in, but in the case where the platform
plugin did not support the requested mode, we would simply
return without deleting the object nor telling the application,
so it would cause a potential memory leak. We need to honor the
contract, even when we fail to set the mime data.
Test was updated to avoid verifying the leak in cases where
the platform does not support all modes.
[ChangeLog][QtGui][Clipboard] Fixed a memory leak in setMimeData()
when the platform plugin did not support the requested mode.
Task-number: QTBUG-41852
Change-Id: I2112da1613199fe1b56724e7ccf097b9e912c117
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Q_COMPILER_DEFAULT_MEMBERS and Q_COMPILER_DELETE_MEMBERS are now set
starting from gcc 4.6. Pre-4.6 compilers implement a non-final snapshot
of N2346, hence default and delete functions are supported only if they
are public. Starting from 4.6, GCC handles final version - the access
modifier is not relevant. Compiler error:
qsharedpointer_impl.h:717:31: error:
'QEnableSharedFromThis<T>::QEnableSharedFromThis()' declared with non-public access cannot be defaulted in the class body
Change-Id: If1d3d4696f91912a09ca72bd4aa1fb07f491a0cb
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... so that a user can have more fine-grained uploadProgress signal
emissions if desired.
Change-Id: I9f77fd80c100dbe249beaf3057e6e8974680ec59
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
- Ensure top level widgets are cleaned up.
- Place wizards beside each other for comparison.
- Use classic style on Windows to avoid interference by Vista style.
Change-Id: I223a40ea14eefe65dc2e9e8ddee44b0f0c806e3d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Apparently, this causes problems with the completer due
to the fact that it matches the root drive "C:\" on Windows.
Task-number: QTBUG-41681
Change-Id: Iaf96675067e22e679371139a1a2fbf011a5edbdc
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Streamline code and remove code that has no effect.
- Create temporary directory and files only when it is actually
required (empty start path).
- Remove try/catch as it is not commonly used in Qt autotests.
Its original purpose was apparently to ensure temporary file
cleanup, but that should now work since smart pointers are used
for temporary files and directories.
- Introduce variable for case sensitivity.
Task-number: QTBUG-41681
Change-Id: Ie5f621c30fc461b880292b853e0660b8fba316eb
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Tracking the file, line, function means the information has to be stored
in the binaries, enlarging the size. It also might be a surprise to some
commercial customers that their internal file & function names are
'leaked'. Therefore we enable it for debug builds only.
[ChangeLog][QtCore][Logging] File, line, function information are not
recorded anymore for logging statements in release builds. Set
QT_MESSAGELOGCONTEXT explicitly to enable recording in all configurations.
Change-Id: I454bdb42bcf5b5a8de6507f29f2a61109dca9b91
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Even when we do not intend to display the text, we still need to go
through the processing of mnemonics to remove them from the text.
Instead of capping the max underlines to 0, the TextDontPrint option now
just saves adding the underline formats.
Task-number: QTBUG-41593
Change-Id: I67790650dbed0092de2c63e5d5a9349dc02d5846
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Take PM_FocusFrameVMargin into account.
Task-number: QTBUG-35146
Change-Id: I1499790537ddf9fbb912ab764b7d049ee11af95d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Say you have a document of two blocks of text.
When you select a block of text in the document and then replace this
with a new empty block (by pressing enter) and then subsequently
undo this action, the following three steps are performed as a
chain of undo commands:
1. Remove the empty block at the beginning of the document
2. Insert a new empty block at the beginning of the document
3. Insert the text back into the first block
Since a block is removed and inserted in the same go, both blocks
require a relayout, since the accumulated change spans both blocks.
However, in QPlainTextDocumentLayout we would only look at the max
of either removed chars or added chars. This would match the text
length of the first block at this point, so we would only relayout
that block. However, since we are also removing characters, the
actual accumulated change to the document is larger. We should
relayout any block touched by the sum of the added and removed
character counts.
Missing this, the paint event would later query
block.layout()->lineForTextPosition(0) which would give an invalid
line despite the fact that the block.length() > 0. This caused
a crash in the paint event when the full width selection was
turned on.
Note that the logic here was only recently updated to include the
removed characters at all in the logic, by the SHA1:
2983cb9531.
[ChangeLog][QPlainTextEdit] Fixed a crash when using full width
selections and issuing a complex undo command chain which removes
and inserts an empty block in one go.
Task-number: QTBUG-36415
Change-Id: Iafe8a69e455e0c713a48714f10f0cace69c84f51
Reviewed-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
IPv6 addresses can start with ":", for which QDir::isAbsolute() would
always return true (QResourceFileEngine::isRelativePath() returns
constant false) and would trip the calculation for local files.
Similarly, IPv6 addresses can start with strings that look like Windows
drives: "a:", "b:", "c:", "d:", "e:" and "f:" (though not today, as
those address blocks are unassigned). Since a valid IPv6 address will
definitely require at least one more colon and Windows file names cannot
contain ':', there's no ambiguity: a valid IPv6 address is never a valid
file on Windows.
This resolves the ambiguity in favor of IPv6 for Unix filenames (which
can contain a colon) and in case of an URL containing scheme, relative
path and no authority ("dead:beef::" for example could have been parsed
as scheme() == "dead" and path() == "beef::").
Task-number: QTBUG-41089
Change-Id: Id9119af1acf8a75a786519af3b48b4ca3dbf3719
Reviewed-by: David Faure <david.faure@kdab.com>
They're gone since Qt 5.0 and only exist as typedefs for QStyleOptionFrame.
Change-Id: Icff45cbd3a47db8618a7f7a80f7252651969237c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
My previous fix for CPU load issues between HTTP thread
and user thread was fragile if the upload QIODevice
emitted readyRead() multiple times.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fix behavior of upload QIODevice
that generate data on readyRead() for HTTP PUT/POST
Change-Id: Idb1c2d5a382a704d8cc08fe03c55c883bfc95aa7
Reviewed-by: Christian Kamm <kamm@incasoftware.de>
Reviewed-by: Richard J. Moore <rich@kde.org>
There were several use cases that did not work with the old
implementation and it was not really readable.
Task-number: QTBUG-3472
Task-number: QTBUG-40067
Task-number: QTBUG-23892
Change-Id: I1e038792dc54cdc6f8d9bb59d80b11dd3c56fac6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The moc preprocessor is not necessarily fully compatible with the native
compiler preprocessor, which can lead to annoying warnings.
This fixes a problem particularly with the boost headers that rely on
MSVC only preprocessor features (to work around other MSVC preprocessor
deficiencies).
Task-number: QTBUG-29331
Change-Id: If884452969b512a746c81e235d31636b39c45b27
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fixes a regression against Qt 4, where Show/Hide events were received
when the minimized state changed.
It is restricted to QWidget so as not to introduce additional events
to QWindow (which already has signal visibilityChanged()) and cause
unexpected side effects in QQuickWindow.
Task-number: QTBUG-41312
Change-Id: Ib165a5daf7a7e5d8231ef8a94b70e8a2a3253057
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
dbmsType was previously kept as a private variable in QSqlDriverPrivate,
however it's particularly useful for QODBC users.
[ChangeLog][QtSql][QSqlDriver] Add support for determining DBMS type from SQL driver.
Change-Id: If1c221520da9ac4ccef85a02db078679d76eac92
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The result of qstrtoull() was unconditionally truncated to an int,
resulting in wrong values being appended to the segments vector
when the numerical segment value was above INT_MAX.
Prevent this by first checking the return value of qstrtoull
as a qulonglong for values larger than INT_MAX and stopping
processing in that case. That means that segments that
numerically overflow an int are now considered part of the
suffix.
Also added tests for the case where a segment value is larger
than ULLONG_MAX. That was already working correctly.
Change-Id: Ia4b89021dcfe6bfae27c8d89bb678ec5e0e3b847
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I think supporting them now is too complex for the Qt code. We would
probably need to rewrite the parser using a tokenizer so we can find the
right name of the function. Just skipping backwards breaks the support
for returning function pointers and PMFs.
Change-Id: I78636437ecd46d77e6b9b013b2f2668cca1b6cd6
Reviewed-by: David Faure <david.faure@kdab.com>
tst_qtjson.cpp(2711) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
tst_qtjson.cpp(2712) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
tst_qtjson.cpp(2713) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
Task-number: QTBUG-41100
Change-Id: I193dc48236bdd3857657a5684178630f0e1dab6d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Remove an useless check which spontaneously allow direct reads from the
socket engine.
Change-Id: Ia3d2a572d6f1563d613fe2f00d0d6849df259827
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Do not zoom 1pt on every single wheel-event, but instead scale
the zoom with the size of the angle delta.
Change-Id: Idbe17356c7845ebd0039f655d3e611e71c6f0dd6
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Only step the value in the spin box when we have accumulated one wheel
tick worth of wheel delta.
Also fixes the obsolete contructors of QWheelEvent so they set the non
obsolete properties.
Change-Id: Ic6ea4b37afa8eec85a6ca7bdc0d919bf8fb02608
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This was done wrong when using the ini format.
Task-number: QTBUG-22461
Change-Id: Ib9390460bce6138659cceac7e3cd25339ba5e9bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
device is private, always null and class has no friends, so no need to have it at all
Change-Id: I320d47f1a712a3202c08b494563533e29d185501
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In the list of default implementations, the raster ops added in
ae0ddb8c72 were all offset by one
composition mode because of a duplicate entry in the array. The
effect would be, e.g. that using the NotDestination operator would
resolve to the Set operator instead.
Most users will probably not have experienced this since any of
the asm-based functions will be preferred.
[ChangeLog][Painting] Fixed some very rare cases of mismatched
raster modes in QPainter.
Change-Id: Ia242b54c78acbe1c89d9b4ecd10936564ec134b2
Task-number: QTBUG-41413
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
When a window's screen changes it may recreate the platform window.
In that case, update the winId in the widget to keep it in sync.
Task-number: QTBUG-40681
Change-Id: Iec815320214832bb63952de3a5bd1340a04dacd4
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
With VS2013 Update 3, Win32 sockets are now allowed in Windows Store
Apps. Upgrading VS meant that gethostname was visible to the application,
but failed to link as the mkspec doesn't link to ws2_32. Adjust the
workaround not to call the newly visible symbol on WinRT.
Change-Id: Ide6d8759cca7acab6c466a9bf4d6b876f6ca7605
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Each test function is responsible for removing the children it added to
m_window, since m_window is reused for each testcase.
Due to this, the test
QCOMPARE(children.length(), 2);
failed, (it was 3).
Change-Id: Idbd13214d2e841450800df0542fbdbcfaac85ce1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Extend the QImage format with two 8-bit grayscale and alpha formats.
These formats have the advantage over Indexed8 that they have simpler
conversion and can be rendered to by the raster engine.
[ChangeLog][QtGui][QImage] Added support grayscale and alpha 8-bit
formats which can also be rendered to.
Change-Id: I4343c80a92a3dda196aa38d0c3ea251b094fc274
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
QToolButton::sizeHint() takes into account the presence of a menu.
However, setMenu() doesn't retrigger a size hint recalculation. Hence,
(un)setting a menu on an already sized tool button won't properly
reset the size hint. Since the calculated size hint is cached,
delete the cached value and call updateGeometry to cause a
recalculation.
Task-number: QTBUG-38949
Change-Id: I6e79e5e70e31afdfd129282b3668875eca86f51d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSplitter::handleWidth() returns either a style dependent value if
d->handleWidth is negative or the value of d->handleWidth itself.
So to preserve this choice after calling saveState()/restoreState()
we should save and restore the value of d->handleWidth rather than a
result of handleWidth() which is non-negative.
Change-Id: Idc11f8063d34b6c4a5f9b0a0032868679766dfb9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
And not a normal pointer. The problem is that in certain scenarios,
if the TLW containing a QSizeGrip changes and the old TLW gets
immediately destroyed, then the mechanism which updates the tracked
TLW is run too late, and ends up accessing a dangling pointer.
Therefore, we need to protect that pointer via a smart pointer.
Task-number: QTBUG-22867
Change-Id: Icfb051132bacde604f660ac7a98bc0a9d1022c68
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add a new PM_TreeViewIndentaion enum value to QStyle and get
the corresponding pixel metric in QTreeView.
[ChangeLog][QtWidgets][QTreeView] Indentation is now style-dependent by default.
[ChangeLog][QtWidgets][QTreeView] Added resetIndentation().
Change-Id: Ifad7987b8f3c6cd32987b89d95390f33043d8f19
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Adam Majer <adamm@zombino.com>
Currently QTextDocuement only provides find using QRegExp. This patch
aims to add support for QRegularExpression.
[ChangeLog][QtGui][QTextDocument] Support for searching with a
QRegularExpression in a document has been added.
Change-Id: I6dba10545b83995d093407038a821fe54db3d261
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Heuristic with last-modified time in Qt has some problems.
1) Remove redundant expirationDate.isInvalid() check
expirationDate.isInvalid is already checked. So I removed.
2) Add dateHeader.isInvalid() check
The dateHeader is used in expiration calculation.
I add invalid check for the dateHeader.
*. The dateHeader is the origin server's Date
3) Change diff time calculation.
The expirationDate is calculated with time diff.
Previous calculation is
// The lastModified is earlier than the currentDateTime.
// The diff has negative value.
int diff = currentDateTime.secsTo(lastModified);
// The expirationDate is earlier than lastModified
// , currentDateTime and dateHeader.
expirationDate = lastModified.addSecs(diff / 10);
*. currentDateTime: current time
*. lastModified: last modified date in server
It means that files are not cached with the heuristic.
I changed diff calculation.
int diff = lastModified.secsTo(dateHeader);
freshness_lifetime = diff / 10; // RFC 2616 13.2.4
4) httpRequest.headerField setting
If current_age is larger than 1 day, the cache MUST attach Warning 113.
*. The current_age is value of age in header
or elapsed time from dateHeader in Qt source code.
Previous code does not check current_age is larger than 1 day correctly.
// dt = 1970-01-01T00:00:00 + current_age
dt.setTime_t(current_age);
// currentDateTime is much bigger than 1970-01-01T00:00:00
if (dt.daysTo(currentDateTime) > 1)
Task-number: QTBUG-40836
Change-Id: I4b00c3b287e6fafeea6b02681533fe75a198247e
Reviewed-by: Jung Dong-Heon <dongheon.jung@lge.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
A lot of code in Qt uses VAR=1 for enabling or disabling some feature
or other, ignoring qEnvironmentVariableIsSet(), which was added for
that purpose. Other code actually reads numerical values from
environment variables. For both use-cases, provide a non-throwing,
non-memory-allocating way to get the numerical (int) value of an
environment variable, complementing qEnvironmentVariableIs{Set,Empty}().
[ChangeLog][QtCore] Added qEnvironmentVariableIntValue().
Change-Id: I81c85287ea10d355c1bbf8d7807ec9a0e477bce0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So far we've only tested matching against QStringRefs which were
spanning the entire underlying QString. Instead, use the offset
matching to also perform tests using "proper" substrings.
Change-Id: Ia66e23f738b52997311ed2cf869e595079984292
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is useful when writing a generic preview-icon-generator which
should work with different type of views, itemviews and QML views.
A way to be notified of a change of icon size was missing on the itemview side.
[ChangeLog][QtWidgets][QAbstractItemView] Added iconSizeChanged signal.
Change-Id: I19b3049961002ca27d71aefbb6980d1e6f225c79
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the types doesn't match in QVariant::compare we do a comparison based
on QString, this may end up indicating a full match, though the we don't
match according to cmp. In this case it would be better if we preserved
the non-matching to avoid breaking ordering.
[ChangeLog][QtCore][QVariant] Fixed ordered comparison between QVariants
that do not match but produce identical toString output.
Task-number: QTBUG-40363
Change-Id: I84a8eca11e8875dba9948bde2906ae7c5aa35704
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This reverts commit 20cf632ad5. The commit
produced to many problems during statics destruction. For example
causing QtCreator crash (QTBUG-40987).
Change-Id: Ib52f6a449c2d84deab2de792559a6a065ca45e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
A "sharing violation" happens when trying to delete the lock file and another
thread/process is reading it at that very moment. Detect the error and try again,
up to 10000 times - to avoid an infinite loop if QFile::remove fails for another
reason such as a sudden change of permissions preventing us from deleting our
own lock file.
On Unix the deletion can't fail because of readers, but it doesn't hurt
to check the return value there too, to catch other reasons for failures
such as a sudden permission change.
Task-number: QTBUG-38853
Change-Id: Icf12a74faed4a4916e3427abc09d9c33aa141476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor the code and move more things into the cross platform
code path.
Make sure the flags survive changing the locale of QCollator.
Use the correct locale on Windows, WinRT and OS X. We now
pass all QCollator autotests on these platforms.
Task-number: QTBUG-40778
Change-Id: Ic2d3334b5018c323a35a3ea8fc1d7ab5f99b4e62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A well formed JSON document is not allowed to contain
trailing garbage at the end. Don't accept this in the
parser.
Task-number: QTBUG-40062
Change-Id: I0a09dbd099a8c643f58023342546c4e67d026fec
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The comparison operators between QJsonPrivate::String
and QJsonPrivate::Latin1String weren't all correct, leading
to wrong sorting of keys in QJsonObjects when the keys were
outside of the latin1 range and resulting lookup errors.
Task-number: QTBUG-41100
Change-Id: Idceff615f85d7ab874ad2a8e4a6c1ce8c2aa0f65
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
In some cases, e.g. when bad credentials are provided in an ftp URI,
QNetworkAccessAuthenticationManager::cacheCredentials is called with a
null authenticator. This authenticator should not be cached, because
it is useless, and leads to inconsistencies in the use of the cache
Task-number: QTBUG-40622
Change-Id: If2a0a422b915f268648f5eef1d68601446123371
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the peerVerifyError test for QSslSocket makes an assumption
about the order in which SSL errors are emitted by peerVerifyError. This
assumption does not necessarily hold for non-OpenSSL backends.
This change fixes this assumption, and also checks that HostNameMismatch
was found both in the errors emitted by peerVerifyError and by sslErrors.
Change-Id: I856d1ea43b36332db0f178d35fc14a4bb18ad673
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the QSslSocket tests use OpenSSL-specific symbols. This
change fixes this issue.
Change-Id: Ib67efa42a15facaf0ad34fc0466341a37d945d1e
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Widgets and layouts added or inserted to a layout are checked for:
- Not being NULL
- Not being the parent widget of a layout or the layout itself,
respectively
Without this commit, adding a widget to its own layout would result in a
CPU-hogging infinite loop. Now, a warning is written to stderr and the
add or insert function call is ignored.
The checks are implemented as public functions of QLayoutPrivate and
thus accessible in QLayout's descendants to be used in various
"addWidget", "insertWidget", etc functions.
Unlike 'classical' layouts like QGridLayout, QFormLayout does indeed
accept widgets that are NULL. To not break this behavior, any call for
the check functions first tests if the widget or layout, respectively,
to test is NULL or not and calls the check only in the latter case.
Automated tests for QBoxLayout, QGridLayout, and QFormLayout were added.
For an unpatched Qt 5.3, each of those automated tests will freeze as
explained in QTBUG-40609. For a fixed version, warning messages about
invalid parameters to addWidget/addLayout/... calls will be read by
QTest::ignoreMessage, resulting in a passed test.
Change-Id: I1522d5727e643da3f7c025755975aca9f482676d
Task-number: QTBUG-40609
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Both Q_LITTLE_ENDIAN and Q_BIG_ENDIAN macros are always defined
on all architectures. So, byte order detection results in
"little_endian" value for big endian systems. Test the system
endianness in a right way, according to Q_BYTE_ORDER macro
documentation.
Change-Id: I5523f90567e78d679a3ff2902a8f5377ed39ceb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These functions are supposed to make it easy for third parties (and
QLineEdit) to implement the textAt/Before/AfterOffset functions.
Before the functions were ignoring newlines completely and thus only somewhat
useful.
Change-Id: I7136b9502a7fa6f8ad9ad7236761a34c1a7fd4da
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This adds support for reading and writing ASN.1 boolean
values. It also adds an operator to test two ASN.1 elements
for equality.
Change-Id: I4a22cbf9808533d593fc59d27b63caaf650b1f57
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a test for a QSslCertificate containing extensions which
are marked as critical.
Change-Id: I314e1f5c9943bcad5d43129a97f9f834882dc6fb
Reviewed-by: Richard J. Moore <rich@kde.org>
This tightens tests performed on a certificate's extensions by checking
isCritical() and isSupported() for all extensions. It also explicitly
checks the keys when value() returns a QVariantMap.
Change-Id: If51c55be25bbcd09cc3a6712ddfea2bf9a01360f
Reviewed-by: Richard J. Moore <rich@kde.org>
The practical uses of a POD QElapsedTimer are not really that clear, and the
number of misuses of this API are quite high. Default the state to invalid to
prevent against mistakes.
[ChangeLog][QtCore][QElapsedTimer] Is no longer a POD.
Change-Id: I267292acf2bfca7404e3e449dd04410441d7ce26
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Previously, this failed because QEasingCurveFunction only had a linear
behavior.
The fix is to change that and let QEasingCurveFunction handle
any of the simple "non-parametric easing" functions.
Task-number: QTBUG-38686
Change-Id: I666d59e10ceb589dcc52956b16a6f0c259aebdad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds the infrastructure for reading and writing encrypted private keys
when using non-OpenSSL backends. Each platform must provide its cryptographic
encrypt / decrypt functions.
As WinRT already uses the common parser, this commit includes an
implementation for that platform.
Done-with: Andrew Knight <andrew.knight@digia.com>
Task-number: QTBUG-40688
Change-Id: I0d153425ce63601ff03b784a111e13962061025f
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of simply doing a match against a string S at offset O > 0
(and checking the result), test that the results never change when matching
against the substring starting at (O - i) at offset i, 0 <= i <= O.
Change-Id: Ib7fd648ca0a36b93d145267ebfb792c46ca4e4f5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When 'cursorPos' is out of bounds ([0, lineEnd]), this method crashed.
Change-Id: Ia0540ab3afbffb5c598f7b8515263cce3b3928e4
Task-number: QTBUG-40753
Reviewed-by: Dominik Haumann <dhaumann@kde.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This change adds the ability to decode ASN.1 INTEGER fields,
provided they represent a positive number of less than 64-bit.
This is needed for PKCS#12 decoding.
Change-Id: Iafb76f22383278d6773b9e879a8f3ef43c8d2c8f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
[ChangeLog][QtCore][QRegularExpression] Support for matching
using QStringRef as the subject's string type has been added.
Change-Id: Idb956bbbdf4213f9ebe035db32cd37cf3370c6bc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Unify the code paths which test the normal match, the partial
match and the global matches. Not only does this remove the duplication,
but it will also enable the corresponding tests to be run over QStringRefs.
Change-Id: Ia2cbe7a540bbe864b0975c9353697bc06c99c397
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSslKey currently has methods which supposedly allow decoding and
encoding private keys as DER protected by a passphrase. This is
broken by design as explained in QTBUG-41038, as storing the encrypted
DER data alone makes no sense: such a file lacks the necessary
information about the encryption algorithm and initialization vector.
This change:
- explicitly stops using the passphrase when decoding DER in the
constructor. The behavior is unchanged, it is not possible to
read the encrypted DER alone.
- refuses to honor the passphrase to DER encode a private key. The toDer
method now outputs an empty QByteArray instead of garbage.
Task-number: QTBUG-41038
Change-Id: I4281050cf1104f12d154db201a173633bfe22bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a test for 3DES encrypted keys in addition to the
current DES encrypted keys.
Change-Id: I229e3ef710e9ee23efa2a3275b89d958491de4a2
Reviewed-by: Richard J. Moore <rich@kde.org>
The native handle and import functions are now available for use in other
parts of the winrt backend.
Change-Id: I07e6f95b3411c3dc7c1a7a164544b18e5e435d01
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
