Task-number: QTBUG-100362
Change-Id: Ib09aec5ea03867163d476a2c92562bc949fc1b1a
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
From the API review.
Pick-to: 6.3
Change-Id: Ic05737db79327e7811fcd974a70914b837e06601
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QNetworkHeadersPrivate::toHttpDate() used a custom format to output a
date-time; the format supplied GMT as suffix, but neglected to convert
the date-time to UTC, so local-time was formatted as if it were UTC,
regardless of its actual offset from it. Fixing this (by the obvious
toUTC() call) broke formatting when the supplied header value was a
QDate, since it's packaged as a QVariant and QVariant's conversion of
QDate to QDateTime uses local time's (not UTC's) start of day. So fix
headerValue() to separate QDate and QDateTime cases and use
startOfDay(Qt::UTC) to get the right start of the day. Added tests for
non-UTC date-times appearing correctly in HTTP headers.
Fixes: QTBUG-80666
Pick-to: 6.3 6.2 6.2.3 5.15
Change-Id: I2792bce14a07be025cf551b0594630260c112269
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Some lines in tests had to be updated because they lost the implicit
conversion from char* to QString.
Change-Id: I95af5859ced95b9ca974205398e38c0bd4395652
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
At some point we decided to support a custom set of ciphersuites specified
by QSslConfiguration (which if you ask me was never a good idea). The law
of unforseen consequiences bit us again: since we now give a set of ciphesuites
to QSslConfiguration and set ciphesuites from the configuration a socket has,
we are limited by the ciphersuites we know about at the moment of 'coding'.
Meaning if an SDK was updated and CipherSuite.h later adds more ciphersuites,
we miss them and 'don't support them', while we ... actually do.
This patch tries to add some more ciphersuites introduced in TLS 1.3 (interesting,
SecureTransport does not support TLS 1.3, but TLS 1.3 suites can be used in TLS
1.2 session).
Pick-to: 6.2 6.3 5.15
Task-number: QTBUG-99368
Change-Id: I439b63845c4893e5621cffaf3bcaf62e2b643c74
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This test case fails on qemux86_64-webos-linux environment and based
on comment on the test case, it probably cannot be expected to pass on
webOS.
Fixes: QTQAINFRA-4717
Change-Id: Ifb34b0c85da2d180a59529791d1109185fef2665
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtNetwork][QNetworkRequest] Added
QNetworkRequest::Http2CleartextAllowedAttribute which controls whether
HTTP/2 cleartext (h2c) is allowed or not. The default is false. This
replaces the QT_NETWORK_H2C_ALLOWED environment variable.
Task-number: QTBUG-98642
Change-Id: I43ae1cc671788f6d2559cd316f6667b412c8e75e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And since it's relatively unlikely to be used, just leave it
behind a environment variable for now.
[ChangeLog][QtNetwork][Potentially Source-Incompatible] Support for
clear-text http/2 was disabled due to incompatibility with certain
servers. If you were relying on this feature you must re-enable it by
setting the QT_NETWORK_ALLOW_H2C environment variable. For a later
version of Qt it will get a dedicated attribute.
Pick-to: 6.2
Task-number: QTBUG-98642
Change-Id: Id3e360726e285b3128e3e3f4bce9440404c9ad6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Maximilian Goldstein <max.goldstein@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Which is anything other than MD5
Pick-to: 6.2 5.15
Fixes: QTBUG-98280
Change-Id: Ifbf143f233ee5602fed1594e3316e6b2adec1461
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The header for QTestEventLoop hadn't been included.
Pick-to: 6.2
Change-Id: Ife3418d1634c030c421c2aa55469f5a099386d4b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This may be a useful factor in deciding whether or not you should
perform communications over the network which are not purely essential.
For example, if you have a logging mechanism you can delay uploading
them until you are no longer on a metered network.
Task-number: QTBUG-91024
Change-Id: I19d32f031a3893512dc440914133678004987fb1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Which just returns all the supported features
Change-Id: I8c3996b00a6ebb114bdbc9db3085a0e27fc8fa79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Previously, when deciding where the actual data is, Frame was calling
padding() to test if offset is needed. A curious case with a DATA frame
containing compressed body and having 'PADDED' flag set with a padding
equal to ... 0, ended in a decompression error (and assert in 6.2 code).
Pick-to: 6.2 5.15
Fixes: QTBUG-97179
Change-Id: I9341a4d68510aa4c26f4972afdcd09a530d5a367
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The new public API returns and notifies changes to the currently active
transport medium for the application. And there's a new private API to
report it, with backends to follow.
Task-number: QTBUG-91023
Change-Id: I527985f9dabcd7bc4a32f36597e21bc4ab664c4e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After calling close(), the socket can enter 'Closing' state, in which
we try to write buffered data before disconnecting. As the device is
already closed, we must disable any pipe reader activity and clear the
read buffer.
Change-Id: I8994df32bf324325d54dd36cbe1a1ee3f08022d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
To allow reading from a slot connected to the aboutToClose() signal,
we should call QIODevice::close() just before closing the inner device.
This patch amends 21f3ff65b8.
Pick-to: 6.2
Change-Id: Ic8cd00497e1bdf923b980c26e9ca874b77e82f89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The docs (10 lines above) say it will find the backend case
insensitively. Thus the comparison should also be case-insensitive.
Pick-to: 6.2
Change-Id: I65901ed81b7d8bdfcf76f5b6c7b40efe63245503
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To match the Unix behavior, we should emit errorOccurred() signal and
close the channel if the write operation fails.
Change-Id: Iac3acb18dbbfe6e7e8afb2555d9adaff1fe98d0f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In a blocking application, receiving the results of write operations
must be synchronized with the waitFor...() functions. But, clearing
the buffer in another thread can cause the code
localsocket.write(...);
QVERIFY(localsocket.bytesToWrite() > 0);
to fail unexpectedly, if the socket has been disconnected between
the calls.
So, defer resetting the buffer until checkForWrite() is called.
Change-Id: I8c21036aab6a4c56d02c0d9a18d4bbce52d724f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The test used to hang on waitForRead(), sometimes, which underneath
involve a poll()+read() syscall pair.
When this happened, the IMAP data came together with the proxy data on a
previous poll()+read() call and the proxy code had already consumed it.
We now wait for data only if data is not already available.
Fixes: QTBUG-96345
Pick-to: 6.2
Change-Id: I084f5d1268a5091ea614fcec91c8d356dcb90d9f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The unversioned libcrypto.dylib that's shipped with macOS 10.15 will
result in a crash if loaded, with a message saying that the unversioned
library should not be loaded, as it doesn't provide a stable ABI.
Task-number: QTBUG-95249
Pick-to: 6.2 5.15
Change-Id: I49325e5d675155e90840cc93623549f725bc77b4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The h2 server is running in a separate thread, so while the previous
test was finished and the server was deleted, it could still emit
and have a queued emission in-flight which would be picked up by
the next running test.
Pick-to: 6.2 6.1 5.15
Change-Id: I26b1bc711df7473032d6078f35f8aca37c40137e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There were several issues with the socket state checking when the pipe
reader is not running:
- the number of object handles in the WaitForMultipleObjectsEx()
call might have been zero;
- a call to the waitForDisconnected(-1) might have hung;
- we did not perform a loop iteration for the waitFor...(0) calls,
so disconnect detection was unreliable.
These issues are related to the same code, so they don't seem to be
addressable separately.
Change-Id: I3bca872bb4191e6a7d38a693d81f7981af7fe145
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
There's not much context to the URLs being printed, so remove the
message. And suppress the message coming from the MiniHttpServer
Change-Id: Ie2025ac717657ed0f2f0163bd0af22e12a49b30f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The insertions are sorted by when they expire. So, we test the various
orders to insert entries.
Fixes: QTBUG-95959
Change-Id: I1e8d7f4c77dce5eae3d4bfa5101f296c3eea1961
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Helped quite a lot with OpenSSL 3 not accepting some old algorithms.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-95123
Change-Id: If4894fa86eba7b002465fa661d436ae6ea751989
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To retain backwards compatibility with some QNetworkReply usage,
namely connecting solely to finished-signal and allocating a buffer to
read into, but without storing the entire decompressed file in memory
until read, we may decompress the file twice.
With this patch users can now avoid this double decompression if the
amount of buffered data stays below 10 MiB. This means any file smaller
than 10 MiB will never need to be decompressed twice to know the size of
it. On top of that, if the data is handled as it arrives (e.g. in
readyRead) and the buffer is kept below 10 MiB it won't need to
decompress twice either.
This is active as long as "countDecompressed" is true, though it
currently always is in QNetworkAccessManger, with a future goal to make
it possible to control with public API. Since it requires the user to
potentially adapt their usage of QNetworkReply.
In this patch we also stop tracking the amount of unhandled uncompressed
bytes (uncompressedBytes) in favor of tracking the total amount of bytes
which has been read() by the user of QDecompressHelper (totalBytesRead),
since we can more intuitively work out the total amount of unread bytes
using this value.
Change-Id: Ie3d8d6e39a18343fcf9b610f45c7fe7e4cd4e474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This signal is emitted by the QIODevice itself, so we don't have to
forward it from the internal socket.
Pick-to: 6.1 6.2
Change-Id: I85745f36d7a27d92f339a9184de3b6e5d46f6f34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This introduces a new attribute that allows behavior to keep
the TCP connection(s) to a HTTP1/HTTP2 host longer or shorter
than the default of 120 seconds.
Note that the server might still close the connection earlier.
Fixes: QTBUG-20726
Fixes: QTBUG-91440
Change-Id: I7da64230a78c642c12c0ddbe6b678cf17c3aafde
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This mechanism was neither properly designed nor correctly tested
initially on Windows.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now implements delayed closing, which is consistent with
the behavior on Unix.
Change-Id: Ic3bc427e68eea7f18201f6129df19fbc87d68101
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In the case where we have pending data to write, calling flush() here
may cause the device to close immediately, if the pipe writer already
got a result of the last operation from the thread pool. In this
scenario, the device does not enter the 'Closing' state, which leads
the following code to unexpectedly fail on Windows
socket.write(...);
socket.disconnectFromServer();
QVERIFY(socket.waitForDisconnected());
Removing the call to flush() makes the behavior consistent with the
implementation on Unix.
Change-Id: Ic31fbc999be979c1e5befa8f132d9fb367f472ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
According to the documentation, calling abort() should immediately
reset the socket to its initial state. This includes:
- closing the file descriptor;
- closing the QLocalSocket as an I/O device;
- canceling a pending outgoing connection, if it exist;
- reseting 'serverName' string.
So, adding a call to close() resets the state entirely.
Pick-to: 6.1 6.2
Change-Id: I9c604b5187c6300b437d7aa4c2d06db03edacf21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
These signals allow monitoring where in the HTTP1/HTTP2
flow a request is currently in.
Fixes: QTBUG-71698
Fixes: QTBUG-18766
Change-Id: Icc2fe435afc9f680fa7a76c32731e25fcdfeb4b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The server's socket may not have been created yet, so use the server's signal
instead.
Switch to QCOMPARE to get better output.
Delete the extra checking for schannel, we don't support Windows 8 anymore.
Pick-to: 6.2
Change-Id: Icd310c32939cb577c9f3438789f667aa0a3a4d85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the file already existed we simply removed the old one without
adjusting the size. So use the removeFile() function which takes care of
that.
Additionally, if the current size was non-null we previously increased
the size (presumably meant to be temporarily but wasn't) and called
expire() which would either:
1. not do anything and return currentCacheSize, if it was not greater
than the max size. This would mean that the size of the file would be
counted twice.
or,
2. discard currentCacheSize, measure the size of the items, and then
remove some items if the total size surpassed the max cache size
Neither of those branches need us to (temporarily) increase
currentCacheSize. It also doesn't attain the (presumed) goal of trying
to keep below the max cache size after having added the new item.
Fixes: QTBUG-95009
Pick-to: 6.2 6.1 5.15
Change-Id: I2b5b13ff473a7aa8169cf2aecfea783c97f2d09a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Qt has a hardcoded backlog value of 50,
this allows for applications to tune this
value. Modern kernels have the SYN cookie
feature that reduces pressure from an
flood attack, the backlog setting however
is then a queue for most likely real
completed (SYN/ACK) connections hence, it's
easy to get clients connections dropped
with this very small limit.
[ChangeLog][QtNetwork][QTcpServer] Added
QTcpServer::setListenBacklog() to be able
to have control over the listen backlog feature.
Change-Id: I1c78af6d99e012591e214b7e09fa85c485880d48
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Both readChannelFinished() and disconnected() signals should be emitted
after closing the pipe. Otherwise, these signals do not correspond to
the state of the socket and may even be resent, if a slot connected to
one of these signals processes events.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now emits both readChannelFinished() and disconnected() signals
after closing the pipe and emitting stateChanged(UnconnectedState),
which is consistent with the behavior on Unix.
Pick-to: 6.2
Change-Id: I1cc551b7897fdba3cec1fd6705f5396790818c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The ${QT_SOURCE_TREE}/src/network include paths of several tests are
apparently not needed anymore. Remove those.
tst_qfilesystementry and tst_qfreelist are the only tests that actually
need to reference files in qtbase's source tree. Simply use the paths
relative to the project file.
Task-number: QTBUG-88090
Change-Id: Ic6f341e001338c1b07dce6e58316245bc9560c5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The base implementation discards the data by reading into a dummy
buffer, which is slower than necessary.
Change-Id: Iabf0c4a25746af6cac5b61d7bda66d89501c808c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QIODevice::readLine() can also return partial lines, which was not
properly documented. Add an autotest for QLocalSocket to illustrate
and test this behavior.
Pick-to: 6.2
Change-Id: Ia2c1c438cc68d2672d34881e11fdf7837232f3b4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
With MSVC it tries to link with the function in the scope qt::tst_QDtls::*
where it is not found
Pick-to: 6.2
Change-Id: If83a9f69c7b3834248569f6bdf203f5442693080
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To (set)decompressedSafetyCheckThreshold, as suggested on the API review.
Task-number: QTBUG-94407
Change-Id: Iffc52691022939ae46703de8a0416355487b716f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
For flush() it's not clear what they wanted to test.
isEncrypted() is tested indirectly in many of the other tests.
Change-Id: Id6dfecbb25b7bba8f1a99518fd9c9e06280aaa9f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It needs to be checked at runtime to know if the current backend
supports it
Pick-to: 6.2
Change-Id: I0998309149b109e2075a008b2b8d8115fa3688cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With MSVC the current way we mark it (potentially) unused ends up with a
warning:
warning C4551: function call missing argument list
We require c++17 core language support so let's use [[maybe_unused]]
instead.
Pick-to: 6.2
Change-Id: I125986b729cb7cd540901702a47365f0491e7887
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As per the best practice laid forth in RFC-8996.
TLS 1.2 was recommended from 2008 until TLS 1.3 was released in 2018.
[ChangeLog][QtNetwork][QSslSocket] TLS 1.0, 1.1 and DTLS 1.0 are now
deprecated, as recommended by RFC-8996.
Fixes: QTBUG-92880
Change-Id: I90cebcfb07cfce623af7ac9f2b66ce9d02586b54
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since we're no longer connected, much less encrypted.
Was done in schannel backend, but not in ST or OpenSSL
Pick-to: 6.2
Change-Id: Ia49387be0088f899a0c89091f7e468dba1c0eee6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With the recent change, 'system' headers gone: not in the test code anymore,
so, for example OPENSSL_VERSION_NUMBER is undefined, making the test
to select a wrong code-path - 'h2c', instead of encrypted h2.
Pick-to: 6.2
Pick-to: 6.1
Change-Id: I3b201e21fac56875c9045c7463e2ae69af4c6470
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Previously, it went direct to QTestResults::addFailure() without going
via the checking for expected failure. Add QTestResults::fail() to
take care of this checking, as for verify() and compare().
Tidied up the code implementing expected failure and QFAIL(), while I
was about it. Adjusted an existing test to verify that expecting a
QFAIL() works, by using QFAIL() instead of QVERIFY(false).
Remove the QVERIFY(false) whose comment brought this to my attention.
[ChangeLog][QtTestLib][QFAIL] QEXPECT_FAIL() now correctly anticipates
a subsequent QFAIL(). Previously QFAIL() counted as a fail regardless.
Change-Id: Icc28cf70e5ff3006363791ea03aa01f2f591eb71
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Rather than when the data is received. Source compatibility is
achieved through double-decompressing the data. This lets us know
how many bytes are available just as before but without having the
uncompressed data left in memory.
Fixes: QTBUG-83269
Change-Id: I352bd09581614c582e4628243e2a0e895ba4946b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For auto-tests that were temporarily disabled. Similar to
network-settings.h, header-only stuff.
Fixes: QTBUG-92866
Fixes: QTBUG-92877
Change-Id: I15b5c0b41f0d8bfe59b09c844884ff6d99e6d41a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The error that the actual runtime will encounter, and not the one that compile-time
ifdefs will (potentially) erroneously select.
Change-Id: I8ef4c34bcb8b3e568bc39f8c8ea6bfb7732f9e27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Make it return bool since the TriState was really only used signify that
the property was unsupported but there is already a separate way to
check if it's supported. More importantly there is no different set of
actions available to a user if they're in the Unknown or False state.
Because of the change to bool, we also rename the property to have an
'is'-prefix.
Change-Id: Iaaaad5ac31e663c36e00223bf5b0e719f412fc69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Instead of relying on some string comparisons and the current knowledge
of which backend supports DTLS, use the proper API we already have in
place to test if a particular class is supported by the active backend.
Change-Id: I58ca0f7b7fcef68ec375cd64b83e51d4335817da
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch adds the API, with no supporting backends
Task-number: QTBUG-93848
Change-Id: I50454717f928819e1b990df91872675e842f9987
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's possible that Qt is built with OpenSSL and some other backend.
The ifdefs generated are not mutually exclusive anymore, as it was
in the past. So tests should rely on the actual backend they have
working at runtime.
In the process of fixing the auto-tests, modernized feature #if-ery and
some associated compilation issues.
Fixes: QTBUG-92875
Change-Id: I2be1b924d506fd36dc4e2c6c9158b5023ff87f32
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QNetworkInterface reports as up and running an interface,
seemingly having a valid IP address which actually has
not IPv4/IPv6 configured at all (this is what getifaddrs
gives us).
Change-Id: I5808d5dfdbc54004a1e02b791917e9b2ba62905f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For some reason the test case was (no longer?) detected by moc
Change-Id: I20f20de76479f7d9db43fae985cefe0869a7e203
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To see if a certain method is supported. To be used in an upcoming patch.
Change-Id: I1a5c2f655585331820701bb54f6991b4aba38273
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Already blacklisted on the other linux versions, but is failing on
SLES now in 5.15
Pick-to: 6.1 5.15
Change-Id: I267908adf94ede51e5520aa2cb806b394fb0438e
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And use this in the authenticationRequired test.
Pick-to: 6.1 6.0 5.15
Change-Id: I18e991eb67168214c2c4f829afaca5018568e989
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With Qt 6 we made HTTP/2 default, which exposed missing handling of
401 Unauthorized (and 407 Proxy Authentication Required).
In HTTP/1.* we would handle this after the response had finished, while
handling the status code. For h2 this path isn't used since it is
heavily reliant on the structure we have for HTTP/1.* (one request per
channel). So we must handle the status code and header directly.
Having that part fixed exposed another issue - when resetting/rewinding
uploaded data we were not resetting the 'totallyUploadedData' counter in
the reply (this, in turn, exposed another small issue). Because of that
we did not actually send any data on the retry, only sending the
content-length followed by no data.
Finally, the small issue mentioned in the previous paragraph was how we
check if we have uploaded all our data. It was only checking if the
byte-device was atEnd(), which it was. But only because it had not yet
prepared any data for us.
Fixes: QTBUG-91284
Pick-to: 6.1 6.0 5.15
Change-Id: I798d105b02688b18a02897cc476f19f57a47f98f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qt_ForceTlsSecurityLevel symbol is not defined if SSL is not configured,
so don't use it in the QNetworkReply test if it's not.
Change-Id: Id3110a1997fea1648b48bfc411e90e7efe306678
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All TLS (and non-TLS) backends that QSsl classes rely
on are now in plugins/tls (as openssl, securetransport,
schannel and certonly plugins).
For now, I have to disable some tests that were using OpenSSL
calls - this to be refactored/re-thought. These include:
qsslsocket auto-test (test-case where we work with private keys),
qsslkey auto-test (similar to qsslsocket - test-case working with
keys using OpenSSL calls).
qasn1element moved to plugins too, so its auto-test have to
be re-thought.
Since now we can have more than one working TLS-backend on a given
platform, the presence of OpenSSL also means I force this backend
as active before running tests, to make sure features implemented
only in OpenSSL-backend are tested.
OCSP auto test is disabled for now, since it heavily relies on
OpenSSL symbols (to be refactored).
[ChangeLog][QtNetwork][QSslSocket] QSslSocket by default prefers 'openssl' backend
if it is available.
[ChangeLog][QtNetwork][QSslSocket] TLS-backends are not mutually exclusive anymore,
depending on a platform, more than one TLS backend can be built. E.g., configuring
Qt with -openssl does not prevent SecureTransport or Schannel plugin from being
built.
Fixes: QTBUG-91928
Change-Id: I4c05e32f10179066bee3a518bdfdd6c4b15320c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As suggested in the API review.
Amends 37bd7b5733
Pick-to: 6.1 6.1.0
Change-Id: Ic3e8567f349568dc3b4dbf79be27c304b39480cf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
On Windows, on exit, the backend will deref (and then implicitly start
deletion of) a COM object. This object tries to communicate with an
object in another thread, though it seems this other thread quits before
the main thread in _most_ cases.
To get around this we move the deletion to earlier in the program. While
this is only reported as a Windows issue it makes for more consistent
behavior if all platforms behave the same.
Document and test that recreation of QNI works as expected after the
destruction (and recreation) of QCoreApplication.
Amends: 0875626e22
Fixes: QTBUG-92568
Pick-to: 6.1 6.1.0
Change-Id: Iffc07f38673019aa059efd4d64d2ad706a03f6fe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It was more complex than needed in a few places.
Change-Id: I0609423f82420f72c65637cf398ccd7694ee85e5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The 'pipeBroken' flag must be updated before emitting the readyRead()
signal to avoid deadlock of waitForReadyRead() inside slot connected
to readyRead().
Change-Id: Ie393fdd594c6691da6609ea18307589b7157c624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Takes advantage of Linux's and Android's support for abstract namespace
when binding sockets, which is independent of the filesystem (see man
entry for unix domain sockets).
To make QLocalServer and QLocalSocket use an abstract socket address,
one needs to set the socket options to QLocalServer::AbstractNamespaceOption.
Fixes: QTBUG-16090
Change-Id: Ia9f9c9cc1ac5c28f9d44b0a48d854a7cfbd39b11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This can only be completed in Qt 7, due to BC guarantees. I've only
updated the source code for QHostAddress and its unit test and even then
I did not touch the documentation. This needs to be completed in Qt 7.0
Change-Id: I26b8286f61534f88b649fffd166b695882f8f3b5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All backend-specific code is now separated and removed
from QSslSocket(Private) code. The original code is mostly
preserved to avoid (as much as possible) regressions (and
to simplify code-review).
Fixes: QTBUG-91173
Task-number: QTBUG-65922
Change-Id: I3ac4ba35d952162c8d6dc62d747cbd62dca0ef78
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit 9391ba55149336c395b866b24dc9b844334d50da)
Renamed the private part of the namespace to QTlsPrivate.
Fixes: QTBUG-91531
Change-Id: Id2d9c458d8d958b35e437eee42889177dad0a7a7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit e4efa00c72c7011f4e5c27722c2a522b30274610)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This is to avoid false positives.
By default files are large if uncompressed size > 10 MB. Only configurable internally.
Also add auto tests.
Task-number: QTBUG-91392
Pick-to: 6.0 6.1
Change-Id: I32258cb7c957f2a23a05157ba4ed5c0af2ba585e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's a bit weird to calculate timeout in milliseconds and then pass
it as number of seconds ...
Pick-to: 6.1 5.15
Change-Id: I1127163ea06e49ac1b53eea6f60ee8590319bfa1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution, but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I66443c3021d6ba98639a214c3e768be97d2cf14b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This patch marks some functions "override" to silence the corresponding
warning.
Change-Id: I88ccc5fa7521ecccc84a6cba9f06ea185cc5679e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
