These examples are outdated and unmaintained, and have not been included
in the documentation for a long time. Removing the files to avoid
further confusion.
Task-number: QTBUG-59249
Change-Id: I3e4c535219cc6b40f3add5430c0967eba2c80eb9
Reviewed-by: Martin Smith <martin.smith@qt.io>
In the gradients example, allow the user to select and show
QGradient's named presets.
Change-Id: I40bc6cbe3a0316ce49d67d63511881b6f6112574
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Adding references where applicable, as removed by
023a818738 when removing stale example.
Add example run snippet to the example landing page.
Remove stale example qdoc file that is superceded by current example.
Task-number: QTBUG-69191
Change-Id: I62dc66edc86da5efb4c79fd124edb2fa619aeb6b
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
- added screenshot
- some modifications to the text
Task-number QTBUG-60635
Change-Id: I57b269f93cdba696b424b5ba008d0f46ac612cda
Reviewed-by: Martin Smith <martin.smith@qt.io>
There are plenty of other examples showing how to use QStateMachine
Task-number: QTBUG-60635
Change-Id: I82300b2a0f4e7733f08579a2aa9b548cb7d87efa
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- new screenshot with more up-to-date graphical look
- deleted itemviews-editabletreemodel.png from old folder
doc/src/images
- deleted unnecessary item in qtwidgets.qdocconf
Task-number: QTBUG-60635
Change-Id: I9b82fa027347fb0fd7adb86038abd32853e68c3a
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
The contact patch of a finger on a touchscreen tends to be roughly
elliptical. If we model it as a QRectF, it's not clear whether the
ellipse should be considered to be inscribed in the rectangle and then
rotated, or whether the rectangle represents the outer bounds of the
rotated ellipse. In practice, since most touchscreens can't measure
rotation, it is effectively the latter. But modeling it that way means
information is lost if the touchscreen can measure rotation: you can
determine the bounds of a rotated ellipse, but you cannot derive the
rotated ellipse from its bounds. So it's better to model the axes
of the ellipse explicitly. This has the added benefit of saving a
little storage space: we replace 3 QRectF instances, whose width
and height will normally be the same, with 3 positions (bringing the
total to 12 QPointF's) and one set of axes. Further, most applications
only care about the center of each contact patch, so it's better to
store that explicitly instead of calculating QRectF::center() repeatedly.
In the past there may have been an assumption that the width of the rect is
the same as the horizontalDiameter of the ellipse, so the rect could be
considered to be rotated, and the ellipse to be inscribed. But in
d0b1c646b4 and
40e4949674 the point was made that the rect
is actually the bounding box of the rotated ellipse.
[ChangeLog][QtGui][QTouchEvent] TouchPoint::rect(), sceneRect() and
screenRect() are deprecated; a touchpoint is now modeled as an ellipse,
so please use pos(), scenePos(), screenPos(), horizontalDiameter()
and verticalDiameter() instead.
Change-Id: Ic06f6165e2d90fc9d4cc19cf4938d4faf5766bb4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The existing recentfiles example was basically a clone of the SDI
example with a "Recent" menu added. Assuming it is better to have
it all in one place, the functionality is merged into the existing
SDI/MDI examples.
- Implement recently opened files handling using a submenu and a
QSettings array in the SDI/MDI examples.
- Remove recentfiles example.
Change-Id: Id5a1ab9fa1c2e6b9ec81309cfe74cf86f450392a
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
-Application Example
-Analog Clock
-Analog Clock Window
-Scribble
-Digital Clock
-Thumbnail images were created with an obscure window manager and
they look out of place in the Welcome Mode in Qt Creator.
-Used Windows 7 as the platform.
-Images within the documentation not updated because they are still
relevant.
Task-number: QTBUG-33597
Change-Id: I255fc4960e9adcec273f21287ef2182656c6b007
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
- These classes no longer exist in Qt 5
- These snippets are not actually used in current docs
Change-Id: I155e70b09933417c8ce1b14d033fb1c17a1c32db
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Examples under examples/ipc were not part of any module
documentation. This change adds the above folder to
Qt Core documentation, and moves the corresponding
files so that the example documentation is built
correctly.
Change-Id: If1f34ce7ef04a02df8a87f820bb2e68ffa723dd4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Moved codecs folder to qtbase/examples
Corrected quote in dropsite.qdoc
Replaced snippet statement by include statement
Added doc for undocumented parameters
Task-number: QTBUG-34749
Change-Id: If4de95b8d39e5680fd0f63f8d2b6685a4b0a8052
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Links fixed: Extra Filters
Basic Tools
blockingfortuneclient
Thread Support
Drag and drop examples
qBinaryFind
qmake common project types
imagegestures
Task-number: QTBUG-34749
Change-Id: Ib93dda00716dc596db327fee5b97e110a9f27fa7
Reviewed-by: Martin Smith <martin.smith@digia.com>
Moved qdoc and image file to correct qdoc folder.
Added brief and ingroup statements to books.qdoc.
Task-number: QTBUG-34749
Change-Id: I5806ffd6f116cccf10238e3e1a9fc627ad0e93a9
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
These two widget-based, mobile-targeted examples are obsolete, defunct,
and/or serve no purpose in Qt 5.
Task-number: QTBUG-31023
Change-Id: Ie5732734bb2547b1ea701d7b3c8dcd806362de09
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Linguist examples are now in qttools.
Change-Id: I8abfff50d81cda143a080711bf9583e7be777009
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Remove docs and images for Multiple Inheritance and Text Finder
examples that were moved to qttools/uitools.
Change-Id: I29e8f76b2512e329c354a6d3676c9b2e09e35726
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Schulz <david.schulz@digia.com>
