Use QTRY_VERIFY instead of hard-coded wait for the tooltip to appear.
Also use QTRY_VERIFY to verify that no top level widgets are left over
to account for tooltips and effect windows.
Change-Id: Ia9835fdc480c6abb034f6fc4ad3d6b32751ee536
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Has been flaky on those platforms in CI.
Task-number: QTBUG-67254
Task-number: QTBUG-66216
Change-Id: Ia1a718a23b1992fcc0e85bf49b714bc43acc4ce2
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Otherwise the ::debug() test fails when a build does not print qDebug()
messages.
Change-Id: I3f3c4b3c7d74004abe5ed8d7ac52164d4f88ef1f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also expands the tst_qsqlquery::batchExec() test to account for this
case and generally test the functionality. In addition it is made to be
more robust to avoid any discrepencies with the testing data. The test
in general is also cleaned up to enable more of it being tested with
the different database drivers where possible.
An expected fail is added for MySQL due to the fact that it has a bug
where null timestamp entries are being converted to the current
datetime when adding it as a bind value.
Change-Id: I0061bd1c69ae35b4858afc49420f13ce59cf48ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Clipping enabled state would not always be correctly restored for the
raster engine (other engines work fine). The raster engine's QClipData
object is sometimes shared between painter state objects on the
save/restore stack. QClipData has its own enabled flag, and this could
then come out of sync. Fix by making sure we sync the enabled state on
restore.
Task-number: QTBUG-58789
Change-Id: I81e6254ebb93df6e153bbef58e32a885273e3224
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Previously, we would divide by zero in BezierEase::findTForX if factorT3
was zero when solving the cubic equation.
This change fixes the problem by adding solutions for the special cases
where the cubic equation can be reduced to a quadratic or linear
equation.
This change also adds tests that cover cases where the equation becomes
quadratic, linear or invalid.
Task-number: QTBUG-67061
Change-Id: I2b59f7e0392eb807663c3c8927509fd8b226ebc7
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
disableNotifiersInActivatedSlot(disable_signaled2) fails, if a signaled
state of the event #2 is detected prior to the event #1. In this case,
we get a timeout on waiting for event #1 which was disabled by the
first notification.
So, accept a disabled state of the notifier in condition for successful
exit from the loop.
Change-Id: I8a2fe76f8ec9362556d1ca1fe0be39a93ed58977
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This test has been flaky on openSUSE in CI. The problem was that the window is
sometimes resized or removed while processing events after adding the rectangle
item to the QGraphicsScene. When the same mouse event is reused again, it uses
wrong screen coordinates. QGraphicsScene handling of mouse events then looks for
items under cursor at the wrong coordinates, does not find any items and thus
doesn't accept the mouse event.
Fix by using QTest API for simulating mouse events. Also wait for changed signal
rather than blindly running one iteration of event loop.
Task-number: QTBUG-67212
Task-number: QTBUG-66216
Change-Id: I968f9470c6f8803d01cebeda6f12ad76b4fd5293
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can use the QT_LIB_FOO #defines instead of our own WITH_FOO ones to
determine if a library is available. Also, it doesn't currently make
sense to refer to libraries which are not part of qtbase here. We might
add that in the future, but QtScript (being deprecated) is probably not
the first one we should add.
Change-Id: I7f2397ca5499ba6003088478161182e960e815fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
They are faster, and using them makes it paint commands be the most
CPU intensive part of lancelot instead of regular-expression matching.
Change-Id: Ifabf1081c48a83ce089660049051428fd3a43042
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Use QT_CONFIG(regularexpression), disentangle it from QT_BOOTSTRAPPED,
switch it off in the bootstrap build, remove the #ifdefs from
qregularexpression.{h|cpp}, and add QT_REQUIRE_CONFIG(regularexpression)
to the header.
qregularexpression.{h|cpp} are already correctly excluded in tools.pri
if !qtConfig(regularexpression).
Change-Id: I21de154a6a118b76f99003d3acb72ac1e220d302
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When the thread that got woken up by release() is supposed to release()
to wake up another thread, we were deadlocking. This happened because we
cleared the bit indicating that there was contention when the first
release(). Instead of storing a single bit, we now store the number of
threads waiting.
Task-number: QTBUG-66875
Change-Id: I72f5230ad59948f784eafffd15193873502ecba4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Resizing is broken on Wayland EGL on Intel Mesa. Move resizing into a separate
test and skip it on Wayland it until it's fixed in Mesa.
Task-number: QTBUG-66848
Change-Id: I9450a5a588b0f5d8f0bd0210aae2dc72aa48d622
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QRasterPlatformPixmap::systemOpaqueFormat returned QPlatformScreen::format
without checking that the format was actually opaque.
This caused several QPixmap tests to fail on Wayland because Wayland
compositors don't communicate the native format of the screen, just a list of
supported pixel formats, so we just return ARGB32_premultiplied in
QWaylandScreen::format().
Rename the method systemOpaqueFormat to systemNativeFormat since that's how
it's used most of the time. And do a conversion when we actually care whether
the format is opaque or not.
Task-number: QTBUG-51748
Change-Id: I47dc1c3f185fb802016ca361206d47d02e8d3cf1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This fixes the following:
- tst_QSqlDatabase::recordMySQL() to account for performance
improvements done for small integral types
- tst_QSqlQuery::nextResult() so that NUMERIC results are seen
as doubles
- tst_QSqlQuery::timeStampParsing() so that MySQL accepts the
CREATE TABLE statement
Change-Id: I68fb1d06dac12d500bb4596463f5bdd65cc9c226
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using a virtual table inside a SQLite database it is possible that
it does not report the right number of parameters. Therefore we need
to account for this case to prevent it from crashing when trying to
bind parameters it thinks does not exist.
Task-number: QTBUG-66816
Change-Id: I3ff70bb1fe73091f43c3df53616f75858e451cfd
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When network access is disabled, every QNAM request returns a
QDisabledNetworkReply instance, which emits error and finished
immediately. However isFinished() was still false, which could confuse
application code.
Change-Id: Ifd43c86364b11a9583a38fde536e6c09c109b55f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Matches glibc commit 9a0cc8c1bd7645bf3c988890ffb59639c07a5812.
[ChangeLog][QtCore][QUrl] Fixed a bug in parsing IPv6 addresses with
more than 4 hex digits in a component.
[ChangeLog][QtNetwork][QHostAddress] Fixed a bug in parsing IPv6
addresses with more than 4 hex digits in a component.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9a0cc8c1bd7645bf3c988890ffb59639c07a5812
Change-Id: I2701038131d91eb108aebb3bec16278e4efe3de2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit fdddb3a481.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66798
Task-number: QTBUG-66216
Change-Id: Iba353b18b0be1346007fde674a9f768c4b9bf384
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit a0db55040d.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66756
Change-Id: I4a8e8c62b4a021d144d570c38c4f4c10e8b1317c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 7257862fb2.
It has been reported that this patch causes widgets with certain effects
become invisible.
Task-number: QTBUG-60231
Task-number: QTBUG-66803
Task-number: QTBUG-66387
Change-Id: I9c3c4cf2f17ac639d1aee5489b665aa1e165af16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
Commit f55c73ede2 added various backendConfig methods;
API review for 5.11 pointed out that Config should not be abbreviated.
Change-Id: I3b294b44a030b2a6e4cdd034fa27583c228dfe42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
They seem to be running just fine
Task-number: QTBUG-66849
Change-Id: Ia48d47c0fff173eb1d6eba38bdba752a91bd2b56
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QDir::isAbsolutePath(name) thinks any path starting with a slash is
absolute; however, to return a valid absolute path, we need to put a
drive prefix onto such a name. So use QFileSystemEntry::isAbsolute()
for that check (it believes in the need for a drive, or UNC prefix)
and handle the absolute-but-for-drive case when it arises.
Add a regression test and make related changes to existing tests.
Task-number: QTBUG-50839
Change-Id: Id5d2b2586bb1423fa2d9375a298a4bb5241cffe0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise random debug messages from Qt might mess up the expected vs
actual results.
The setting of QT_LOGGING_RULES in initTestcase has been removed, as
the selftest overrides that for each invocation of a subtests, via
the processEnvironment() function.
Task-number: QTQAINFRA-1631
Change-Id: I855d31274f8261f8b125df23409353f7101be0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_GADGET macro cannot be used in templates. It can however be useful
to derive a template class from a Q_GADGET enabled base class to benefit
from type safety features in C++ (e.g. the class could represent an id
or handle for some C++ type).
For proper wrapping of a QVariant with a gadget value in a QJSValue, the
QMetaType::IsGadget flag must be set for the registered template
instance type - which does not happen prior to the fix because
IsGadgetHelper requires qt_check_for_QGADGET_macro to be defined in the
registered class but not in an ancestor class - in other words: The
class must declare Q_GADGET.
To overcome this, IsGadgetHelper/IsPointerToGadgetHelper can now
differentiate between a Q_GADGET flagged class (allowing
automatic registration) and a derived class, e.g. a template class
(forcing Q_DECLARE_METATYPE to be used explicitly).
[ChangeLog][QtCore][QMetaObject] It is now possible to use template
class instances inheriting from a Q_GADGET in Qml
Task-number: QTBUG-66744
Change-Id: I7632ad45cff79fa422b3f852ca0b963f35fab155
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
That is correct C++. GCC (and apparently Clang) accept it after the name
for compatibility with the old __attribute__ syntax.
Change-Id: Ie7f3adaaed83198ca1c61bc0efdf51634e457b07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If buddy is deleted then QLabel will still try to deliver the
shortcut event to it, in QLabel::event(), and cras.
Besides connecting to destroyed() which alone fixes the crash,
also hardened it and guarded against dereferencing null buddy,
in the unlikely event of someone adding features to QLabel.
The second part is suitable for backporting to the LTS branches.
Task-Id: QTBUG-66841
Change-Id: Ib6a36a9f99cee31afe1f88eb77f5b6cafb8b1086
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The test has been flaky on top of QEMU. The test is clearly a sort of manually
rolled benchmark, not a regular autotest. Remove the test and replace it with a
benchmark in QObjectBenchmark.
Task-number: QTBUG-66823
Task-number: QTBUG-66216
Change-Id: I7a48293023f32141eed6fea50fbb63af18933a8f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When QStandardItem::insertRows/Columns is called with an empty list
or an insert count of 0, do not assert but return false.
Task-number: QTBUG-66491
Change-Id: I328598e08584fb9b0a35075458bfeb31c57ebfee
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since Qt 5.4 the QTabBar can be automatically hidden when it has less
then 2 tabs. Therefore the sizeHint should not consider the tabbars
size when the tabbar is hidden.
Task-number: QTBUG-64715
Change-Id: I2f248f88d9070de5354f7344c7628a78442ab499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Postgresql needs a special value for nan and +/- inf. This was
considered during insert but not during select.
Also remove some pre-c++11 inf/nan - handling and replace it with
Qt equivalents.
Change-Id: I044ca58e9cf673f4b100b05a0d8e25c8a9c29ec5
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Avoid lots of warnings about not being able to set "modal".
Change-Id: I396718f14a55203f9989c03e20efc647c64795a9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
