The operator_eqeq(data13) test expected the local-time epoch and UTC
epoch to agree precisely if the localTimeType set by the test's
constructor says local time is UTC; however, when the local zone is
*sometimes* ahead of (or behind) UTC, due to DST, localTimeType is
duly set to indicate that, which doesn't preclude the zone agreeing
with UTC at the epoch. This indeed happens for Europe/London, which
agrees on the epoch but was ahead a few months later. So we can't
determine what outcome to expect based solely on localTimeType,
although we can be sure of a match when local time is UTC. So skip
this test when local time isn't UTC (and document what's going on a
bit better).
Task-number: QTBUG-65435
Change-Id: Id9b8aa0402f2a2b410e0234f6eca4ab0d1010bc4
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove black-listing of test; the problem was due to misconfigured
time-zone on the CI system - it was on some zone that presently
coincides with UTC, not actually on UTC as supposed.
This reverts commit 597b96b8fa.
Change-Id: I72ad1dfa38532362c05aef33cd874f7f79879a41
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on the new Ubuntu 16.04 template with UTC timezone
in the system settings.
Task-number: QTBUG-65435
Change-Id: I397f01ab3fed354a4eeec8b05415226a75fce5a1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
When parsing a date-time's zone, a stray Z denotes UTC (a.k.a. Zulu
time), despite not being a valid name for the zone. Clients parsing
such date strings had to treat the Z as a literal, rather than a
zone-ID, but then they got back a LocalTime instead of the UTC the
string actually described. So teach QTimeZoneParser to handle this
special case and adapt an existing test (that used a time ending in Z,
but had to treat it as a local time) to check this works.
[ChangeLog][QtCore][QDateTime] When parsing a time-zone, "Z" is now
recognized as an alias for UTC.
Change-Id: Ib6aa2d8ea2dc6b2da526b39aec74dbc007f90fd8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check we do handle DST after epoch and don't before.
Check we do notice various unusual transitions.
Check we do handle non-whole-hour-offset zones.
(Unfortunately, MS-Win lacks data for some of the zones and is wrong
about the two date-line crossers, so we skip those for it.)
Change-Id: If420d61b9db7f914ca25c22297c16e917ad2307a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Separate the part varying between tests from the common form of all
the tests, so the reader can see the common pattern and know for sure
that there's not a typo or copy-and-paste glitch.
Change-Id: I3145a26ab42c104eb27756d906ac87f937024bad
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The serialization of date-times understood time-zones (indicated by a
't' in a format string) but the parsing didn't (so viewed the 't' as a
literal element in the format string, not matched by the actual zone
it needs to parse), although some tests expected it to.
This made round-trip testing fail.
Implemented parsing of time-zones.
Re-enabled the formerly failing tests.
[ChangeLog][QtCore][QDateTime] Added support for parsing of time-zones.
Task-number: QTBUG-22833
Change-Id: Iddba7dca14cf9399587078d4cea19f9b95a65cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike setTimeSpec, this forgot to clear the bit when detaching. So it's
possible that some further use of the flags could incorrectly conclude
that the data was short and then proceed to corrupt the pointer.
The example from QTBUG-59061 caused this because toUTC() -> toTimeSpec()
calls setMSecsSinceEpoch which left the bit set; then addDays() calls
setDateTime(), which calls checkValidDateTime() and that corrupted the
pointer. This problem was more visible on 32-bit systems because no
QDateTime was short (except for default constructed ones), but it
can happen on 64-bit with sufficiently large dates.
Task-number: QTBUG-59061
Change-Id: Ibc5c715fda334a75bd2efffd14a562a375a4e69b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some format and parse tests for time and date-time depended on locale
but had test data for the C locale (so fail if the test-environment
has, e.g., LANG=de_DE@utf8). So impose the C locale (until Qt 6).
The date-time test did *some* attempts at fixing for locale, but
failed to handle am/pm; and we do have "### Qt 6" comments in
Q(Date|Time)+::fromString indicating that we intend to switch these
methods to use the C locale by default (which shall fix this once and
for all). So rip out the incomplete localization now and test we work
properly at least when the locale used *is* C. Add a comment to the
matching QDate test to rip out its (presently adequate) matching code
once we do get to Qt 6 and make fromString() use the C locale.
QDateTimeParser uses systemLocale(), which is initialized the first
time it gets accessed; so we need to frob the locale *early*; doing so
in the test-class constructor is about as early as we conveniently
can; and seems to work (while doing it in individual tests does not).
(There is no point rolling back at the end; the QSystemLocale global
has been set up by then, so the roll-back would merely leave the
global out of sync with setlocale() and the environment.)
Task-number: QTBUG-58728
Change-Id: Ifa6778a80276050a099387a6dab15a1096be7561
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_QDateTime::operator_insert_extract() was setting the time-zone and
taking care to restore it at the end of the test; however, if the test
were to fail, the restore would be skipped. Package the zone-setting
and restore in a class instance, so that premature return can't bypass
the restore.
Change-Id: I3df63260da17e481ef4d0d107d9f0fdea3e147e7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... along with the two matching unused methods of QDateTime's test.
Change-Id: Id11a4b1b0132587f0df451d49c0043e9425d87ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An overflow-check needed the datum for the "min" test to be minus the
datum for the "max" test; so explicitly make the former use -max()
instead of synthesising it as min()+1. This simplifies the
explanation of why that's needed, too. Clarify the overflow-check's
comment at the same time.
Change-Id: I41f56764fdf5e8c749bfae7a685e5fb77d37b3a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, a zone-based time would claim to be GMT, rather than
identifying its zone properly. Sadly, testing this reveals that
proprietary operating systems don't handle abbreviations ideally.
Task-number: QTBUG-57320
Task-number: QTBUG-57298
Change-Id: I8d8b7fffdbf65ac6178a65f5fc2df4d25afb1a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the time is specified relative to a zone, the ISO date produced
lacked its offset suffix; all zones were treated as if they were local
time. Handle zone as for an offset from UTC and ensure we do set the
date-time objects's offset from UTC when it's zone-based.
Change-Id: I7c9896bb8ec0a9d89df14a6e94b005174ab9e943
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such mappings are ill-defined in the presence of daylight-savings time
(DST); at its transitions, you need information about whether DST is
active or not to determine the correct UTC value. Existing code did
not have a way to be told that hint, so could not be correct.
Fixing this required changing the (thankfully private) APIs by which
QDateTime accessed QTimeZone's information stipulated by zone time.
In QDateTime, this required propagating the needed hint, when DST
status was known.
QAndroidTimeZonePrivate overloaded QTimeZonePrivate::dataForLocalTime
with an implementation that works whenever !hasTransitions(); the base
implementation handled this case lamely, so I've moved the Android
implementation there, to have only one place for both re-writes.
Amended tst_QDateTime's expected failures; passing a date and time to
the constructor *is* ambiguous when the moment indicated is in a
transition. I have changed which way we resolve that ambiguity.
Added round-trip test of QDateTime's fromMSecs/toMSecs (but as a
QTimeZone test, since that's what's actually getting tested), based on
a test-case from Marko Kangas. Initially failed for various zones,
each at one hour-offset; and, on some platforms, for some zones, at
all offsets. These last revealed that a platform may claim to have
zone information yet, for some zones, lack it (or have very incomplete
information). In each case, despite this, the platform does give
offsetFromUtc(). (The test also found another pre-existing bug on
Linux; fixed in an earlier commit.)
To accommodate these gaps in transition data, the transition-based
code now falls back to the offsetFromUtc()-based code (used when there
are no transitions) if it can't find a previous transition (which, in
any case, it needs to do its job).
Task-number: QTBUG-56460
Task-number: QTBUG-56397
Task-number: QTBUG-52284
Change-Id: I2f7422a9e9d3767940b1901d887c6a2c1f36ac9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Qt::ISODate format strips milliseconds, so a new format is introduced
that keeps the milliseconds. A new format was chosen over fixing the
existing format due to the behavioral change of suddenly having ms
as part of Qt::ISODate.
Change-Id: If8b852daed068cce8eee9b61a7cd4576bc763443
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CFAbsoluteTime is measured in seconds, represented by a double,
so when converting milliseconds to CFAbsoluteTime we may get a
slight error due to missing precision in double to represent
the milliseconds exactly. By rounding to the closest millisecond
when converting back, we avoid truncating and being one ms off.
Change-Id: If1e99f97b000fb8cb893ddfc5d7ba81096c0ea88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
These new functions use a 64-bit integer in the API, instead of the
broken 32-bit unsigned integer that the previous xxxTime_t functions
used. That was a design flaw when the API was introduced back in Qt 4.2,
so I'm deprecating the API and slating it for removal in 6.0.
The changes to qfilesystemmetadata_p.h and quuid.cpp are necessary to
build the bootstrap library. The rest of the adaptation to the new API
will come in the next commit.
[ChangeLog][QtCore][QDateTime] Introduced toSecsSinceEpoch,
fromSecsSinceEpoch and setSecsSinceEpoch functions, which use 64-bit
integers to represent the number of seconds.
[ChangeLog][QtCore][QDateTime] The toTime_t, fromTime_t and setTime_t
functions are deprecated and will be removed in Qt 6.0. For new code,
use the equivalent functions with "SecsSinceEpoch" in the name, or the
equivalent ones with millisecond accurancy that have existed since
Qt 4.7.
Change-Id: Ib57b52598e2f452985e9fffd145a355d0e7ff48d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It made us skip the rest of the test, not just the small set of
sub-tests that were conditioned by the if () in whose else it sat.
Change-Id: I5e914e0aeb9d5ba44b21966d071aaccbc590365d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Setting conflicts to isSet & DaySection cleared it if we hadn't seen
the day stipulated, even if there had been a conflict (e.g. over year)
before we hit the day-of-week that didn't match the (unset, so
defaulting to) 1st of the month. Explicitly test for conflict and
only set conflicts (to true) if there is a conflict. Added regression
test.
Change-Id: I7363eb66a8bb808d341738d14969039834f50db8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Uses a time derived via .toUTC() to ensure the .toLocalTime() comes
out at the time we expect.
Task-number: QTBUG-49008
Change-Id: I2005127929c7eab1b7a3cbaba8d21df8c9585d17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime::toString for Qt::TextDate unconditionally uses the system
locale (because QDate::shortDayName and QDate::shortMonthName do).
Setting the default QLocale has no effect. If you ask me, those two
QDate methods are buggy, but they are documented that way.
Change-Id: I408dcb81ba654c929f25ffff1427366b04da5a43
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The important one is EET, for the benefit of our CI system; but other
European zones and the USA's coastal zones likely have enough hackers
in them to make this worth checking.
Change-Id: Idcc703bce29808e1a0a6279680cc8d3cbed38dac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Time zones change on the whim of politicians. Consequently, we can
seem to be in CET/CEST or on UTC (because we tested sample dates when
our zone coincided) when we aren't (i.e. we're in a materially
different zone at the time probed by some particular test). Make the
initialization of the globals that test this more robust against
governmental meddling and document the unfixable problem with Algeria:
a DST transition *on the epoch*.
Change-Id: I17c5c81d339b80af12f4ffab367e28052dd6c2fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are several European time zones; the only one relevant to the
tests here is CET. They won't work with WET, GMT or EET. So name
them and related variables for CET, not for Europe.
CET's summer-time isn't called CST; and the (existing) spring forward
test works only in CET/CEST, not elsewhere in Europe.
Change-Id: I55c7544bf792de7495700b749b935ec534831d8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QDateTime::addDate() and friends sanitize their end-state, they
were using the DST status of their start-state (if known) to control
it. This lead to misguided results and, in particular, inconsistent
results given that a raw-constructed QDateTime comes into being
ignorant of its DST, while a .toLocalTime() one knows its DST.
Furthermore, the code to do this was triplicated, tricky and poorly
explained. So pull it out into a local static function and explain
what it's doing, and why, more clearly and only once.
Task-number: QTBUG-49008
Change-Id: Ia4bb3c5e9267fff8bb963ea705267998218ed623
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Widen its interval (to work in more TZs) and test spring as well as
autumn. Anywhere that does have a DST transition probably has it
between August and December; and there's no benefit to using a narrow
window.
There's also no sense skipping the test if we don't know there's a DST
transition: the test should still work, it just won't be testing
anything (about DST transitions).
Combine date and time checks into date-time checks, so that, when one
of them fails, QCOMPARE lets us know how the other changed, too.
Task-number: QTBUG-49008
Change-Id: I145b939ffef0dd0b54fd0e3cdf72a159c57ec00b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test that stepping into the missing hour lands us somewhere sane.
Check that raw instance and product of .toLocalTime() agree.
Task-number: QTBUG-49008
Change-Id: I430382ae223bcb43b151d2d6054ecbdd7edc8a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
warning: 'typemsg1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: Ie68d279eccb003a2ca5a0116eea336cbc8776660
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ieffb429efdc14aa5932b3fcdef5a18e13a62d35f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
