qnativesocketengine_win.cpp: don't check if timeout is < 0, because
remainingTimeAsDuration() doesn't return negative values.
All the changes done in one go, not function by function, as that causes
the least churn. You can think of them as a couple of very similar
changes repeated various times.
Drive-by change: replace `forever {` with `for (;;)`
Task-number: QTBUG-113518
Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The pre-existing test for QLocalServer was testing only a minor subset
of cases, so replace it with the call to
QTestPrivate::testReadWritePropertyBasics.
The test for QLocalSocket's bindable properties was missing, so add
it.
The new tests didn't reveal any problems.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I695bb050d39eeae9ffb84c097c36601a4ca89af6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Let's do it in initTestCase(), where we're already searching for IPv6
addresses, instead of storing the information in a local static.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177efb6a055aaa58
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove all "#undef QT_NO_FOREACH" white-listing from source files.
Previous commits have removed all remaining Q_FOREACH/foreach uses in
this sub-tree.
Also remove one source file from NO_PCH_SOURCES in CMakeLists.txt.
Task-number: QTBUG-115839
Change-Id: I02cf994eda720c028e613407342fbd6658fa62b1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Straightforward ports where the container could be made const.
Use C arrays instead of QList if the data is known at compile time.
Drive-by, where appropriate make the for-loop variable a const& (e.g.
QString) instead of copying it for no reason.
Task-number: QTBUG-115839
Change-Id: I273a386e414e5923e750072f0407226efcd4531e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The containers are created locally in the top level test functions, they
can't be made const due to the way they are filled, however the loop
body don't change them; even if the code in a loop would cause
re-entrance du due to signal emittance or events processing, those
containers aren't affected and aren't changed during iteration because
the top-level test functions themselves aren't re-entered, hence
use std::as_const.
Drive-by change: take QHostAddress by const& when it's used as a
for-loop variable (it has a QExplicitlySharedDataPointer d-pointer).
Task-number: QTBUG-115839
Change-Id: I443169e10d973aba2f62854aba200fc2dc2c80aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The loops were iterating over a temporary, so use a local const auto
variable to hold it, and use ranged-for.
Drive-by, make the for-loop variable const& instead of copying it,
for any object that has a d-pointer (QNetworkAddressEntry, QHostAddress,
QNetworkInterface).
Task-number: QTBUG-115839
Change-Id: If96c0b2a6142fe2fa2ed45ed7e2435cc1f80e005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All of these fall into the trivial category: loops over (readily made)
const local containers. As such, they cannot possibly depend on the
safety copy that Q_FOREACH performs, so are safe to port as-is to
ranged for loops.
There may be more where these came from, but these were the ones that
stood out as immediately obvious when scanning the 100s of uses in
qtbase, so I preferred to directly fix them over white-listing their
files with QT_NO_FOREACH (which still may be necessary for some files,
as this patch may not port all uses in that file).
Pick-to: 6.6 6.5
Task-nubmber: QTBUG-115839
Change-Id: I7b7893bec8254f902660dac24167113aca855029
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
"Never use a dynamically-sized container for statically-sized data."
Port the loop from Q_FOREACH (which can't deal with arrays) to ranged
for (which can).
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: Iecfc037c8bbfc0b3196ed0c65f680768a8d2353a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
earlyConstructedSockets is a QObject, but had no parent and was never
deleted, leaking all the data is holds.
Fix by giving it a parent.
The code predates the begin of the public history.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: Ibc5688afd6111e84f591c37e39b6bb618d76c47a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I000cd3b0809b6417c3b1ab520e4de746afee71fc
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We now add NOMINMAX to PlatformCommonInternal target which will be
linked to everything else, so min/max will not be defined upon the
inclusion of `windows.h`, or other headers.
Pick-to: 6.5 6.6
Change-Id: I10016720dac7ce015e929885b7368ee86d8b6918
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's quite flaky, and since we currently don't have FTP support
there's no point in making sure it works
Pick-to: 6.5 6.2
Change-Id: Ice01e8d36f2b7830813119da3513cc01ec005c46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's unlikely we will ever use pro2cmake at this project stage,
so it doesn't make any sense to keep the 'special case' markers
in the CMake scripts. Remove them and replace with TODO where
needed.
Change-Id: I84290c20679dabbfdec3c5937ce0428fecb3e5a7
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit 9286d46ee2.
Reason for revert: Should be fixed by 5c6814fb18760f65bab0f8b9cd623ee5c874a58d
Change-Id: I3a161df445af8dcbb61138d57e931a093a319027
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All the other overloads are implemented using the new one.
Windows change relies on the pre-check in the code review making sure it
compiles.
[ChangeLog][QtCore][QThread] Added sleep(std::chrono::nanoseconds)
overload.
Task-number: QTBUG-110059
Change-Id: I9a4f4bf09041788ec9275093b6b8d0386521e286
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The aim is to have fewer files including <windows.h>.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: Id9cc08f54b5daf6d7e317fad27036dc2efaacbb8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When 'this' is IPv6 and 'other' is Any then there is no point in testing
'other's IPv6 address.
Added extra tests against QHostAddress::Any*.
Pick-to: 6.4 6.2 5.15
Fixes: QTBUG-108103
Change-Id: I09f32b1b147b1ec8380546c91cd89684a6bebe2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to the grafana dashboard it has not failed in the
past week.
Reverts ad736e9150
Pick-to: 6.4 6.2
Change-Id: I3eac3c7fd667cfe2cf951b2808dddbfed8eae087
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Two test-cases had the same name; distinguish them by the part of
their data in which they differ - one closes, the other doesn't.
Change-Id: I37051baf194bf8df742688739ad01e3335e64dc7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unix systems have got crash loggers in the past 15-20 years, notably
macOS and Linux (abrtd, systemd-coredumpd, etc.). By setting the core
dump limit to zero, those tools should be mostly inhibited from running
and thus not interfere with the parent process' timeouts. Even for
systems without core dump loggers, disabling the writing of a core dump
to the filesystem should also help.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171d112d0671effe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Just in case the same test is being run in parallel. We do that by
creating a listening TCP server in the test process. This test is
supposed to test the address reusability, so a clean close on a server
that never accepted a connection should not cause reusability issues.
Change-Id: I12a088d1ae424825abd3fffd171ccfb9fc5c09ee
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To try to figure out why QProcess::waitForReadyRead is returning false
so quickly. Though we know it's going to be "Address in use".
FAIL : tst_QTcpServer::addressReusable(WithoutProxy) 'process.waitForReadyRead(5000)' returned FALSE. (Failed to listen: The bound address is already in use
Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
tcp LISTEN 0 50 127.0.0.1:49199 0.0.0.0:* users:(("crashingServer",pid=40529,fd=4))
)
Pick-to: 6.4 6.2
Change-Id: Ic43a460bfc7c7eb6379405b7a1a064e502b6fef3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For some reason it has become extremely flaky.
Blacklist to unblock most patches.
Pick-to: 6.4 6.2
Task-number: QTBUG-107500
Change-Id: I11c3ff5e018981be46c20282fa171bce687596b2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
So we can gather statistics on whether it is still failing
Pick-to: 6.4 6.2
Change-Id: I1f4080f4d96f31ce2b689cda175af3a35563e232
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The iBridge interface is used for the keyboard touch bar, and the Apple
Wireless Direct Link interfaces are used by Apple for various purposes.
Setting up a server on these interfaces does not work.
Only the tst_QTcpServer::linkLocal unit test on macOS is affected by
this change.
Fixes: QTBUG-103892
Change-Id: I29701ce51d5e40dff6c59547a8639c1fba330d36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was unblacklisted in b885820c39
however it is still very flaky.
Change-Id: If9796231c584c894387106dfeb262c9eb4ce73f5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The new signal pendingConnnectionAvailable is emitted after a new
connection has been added to the pending connections queue. Connect
to this signal and call nextPendingConnection to handle incoming
connections.
The existing unchanged newConnection signal is emitted after the
overridable function incomingConnection is called, regardless of whether
a new connection is added to the pending connections queue in the
incomingConnection function or not.
If a subclass that overrides incomingConnection either decides to not
add all incoming connections to the pending connections queue, or to
postpone adding the connection until a handshake is successfully
completed, the pendingConnectionAvailable signal should be to used,
because this signal directly corresponds to insertions to the pending
connections queue.
[ChangeLog][QtNetwork][QTcpServer] New signal pendingConnectionAvailable
is emitted when a new connection is added
Task-number: QTBUG-100823
Change-Id: I00c76761389065f68271553e69e6c45c393a2fa8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
As well as processConnection.
These tests cause flaky failures on Windows.
Pick-to: 6.3
Task-number: QTBUG-102880
Change-Id: Ie4bfe2ef40ad44efcfd0d83711ce257d1244ecdc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... a leftover from the initial patch-set not required in the one that
merged.
Change-Id: I0c5e94d8a0409faf4f7f9a354e98e239f7186da3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Most likely related to qemu network configuration which cannot be
modified. Reason is that in QNX there is tool which can be controlled
qemu configuration, and it does not provide options for more finer
grade network configuration.
Pick-to: 6.2 6.3
Task-number: QTBUG-101274
Change-Id: I660466e36252e902a2314fb3f4988c531cda9214
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To enable using `ninja tst_qlocalsocket_check` and have the
helper (re)built as part of the dependencies.
Pick-to: 6.3 6.2
Change-Id: I8703c4202a97606991d1cffe0d0f8e909a51f12f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the blacklisting file format only worked with slot:data or
plain slot names for the items to blacklist. However, tests with
global data report themselves with the global data-row tag in the same
way as function-specific ones do; and tests which have both join the
two as slot(global:data) in the test output name, so the reader is apt
to mistake global:data for a data tag. In any case, it is potentially
desirable to be able to blacklist a function with either or both of
global and local data-row tags specified. Add support for that and
remove a blacklisting that was only needed due to the lack of this
support.
For now, make the new parameter to checkBlackLists() optional, so
that qtdeclarative's qmltest framework can adapt to this change.
Fixes: QTBUG-100870
Change-Id: I9125811ebdab75d3fb462ba8b60561f003426502
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
