QTRY_VERIFY waits for a condition to become true while regularly
processing events. There is no need for a custom solution to this
problem.
Change-Id: Ia65c90cbdb165b543f5c78f9bac3cfadd77dfb3f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTRY_VERIFY waits for a condition to become true while regularly
processing events. There is no need for a custom solution to this
problem.
Change-Id: Ia23e2fb61cdc5c3a3a8a729cd4356ba930fe7cb7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Forward port of fix for http://cmake.org/Bug/view.php?id=12554
Test fails before and passes after.
Change-Id: I7a3ab2369cb3095c63f9e2a3e604088ebdcc2465
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These snippets are used on the module pages in qtbase.
Change-Id: I755897176275288521cd557fd82b0687181b302b
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
QDirectFbScreen needs to have the full QDirectFbCursor definition, include
the header file directly instead of a forward declaration.
Impelement QDirectFbWindowEGL::eglSurface to return the EGLSurface of the
underlying DirectFBWindow.
Change-Id: Ib6765331ffea6e0b5f10f738d9e05320b7f8155f
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Change-Id: Id2f57cc2f64ae25f5f84d1206035b7a2c309d1c7
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When using clang, the forward-declaration test fails to link, unlike
with other compilers. The standard says that deleting a forward-declared
pointer is undefined behavior, so the link failure is a valid result of
trying to do so.
Change-Id: I527b91c15b7d51d9522d95af0630e7dacd26bb30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QT_MODULE_BASE is exclusively used to refer to the top-level source
directory of a module. However, in non-developer-build mode (used
only when the build path is not equal to the install path), syncqt
would incorrectly set the value of QT_MODULE_BASE to the build
directory. This caused all $$QT.<module>.sources variables to point
to the wrong place.
Make it always point to the source directory.
Change-Id: I401cf000f9e3a4ab97d68db40330bb98aec25a9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
During shadow-building it was noticed that executing make install
did not actually build mkv8snapshot and therefore caused an error.
Change-Id: I126cdbaffb85170e25412b93bc99af79ac6f4642
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
These are no longer used. Qt 3.x used them to enable thread support
(which was optional at the time), but starting with 4.0, thread support
is always enabled, and these defines were removed from the code.
Change-Id: I4d1c75171c263383fc055d2a7fe52ca0501acd7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: Ia7bf5046420ee8f2d690d098937a212eb75b07ce
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I94e4c9e525016405abba90bbdbe58e7786ce5bc4
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I4746ed5ba41fba801599f443d1214e1744807e20
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This reverts commit f73e42369a5b4ba43cb8dc8cbcc6232e4375306c
This is a work in progress and is not useful yet. Cocoa/Objective C generates a lot of errors which is making creating a suppression file harder than I initially anticipated.
Change-Id: I045ba1eb9ae627a063a09422f6b5c2bfe6a225ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: hjk <qthjk@ovi.com>
bind() test failed if there is an autoconfigured IPv4 address.
e.g. bluetooth adaptor that is not attached to a network.
Or WLAN adaptor in peer-peer mode.
- solved by skipping the autoconfigured IPv4 addresses in the same way
as IPv6 addresses are already skipped
bind() test fails for proxy
- skipped, QTBUG-22964 created
Change-Id: I9a799ae8db421783f474e97cf876d6e265516397
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Change-Id: I8f6795f1d40983af0478270f33ab1c06abe67133
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Most embedded GL chips support 24-bit depth with packed
8 bit stencil, but more rarely 32-bit. Asking for 32
bit means we often fail on other properties to, such as
multisampling.
Change-Id: Ib913d94af0635b09913ff15cff54cc694ba293fc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Previously, autotests silently ignored the -graphicssystem and -qws
parameters so that test-runners did not need to include logic to decide
whether to pass those parameters depending on whether a particular test
was a GUI test or a non-GUI test.
In Qt 5, both of those parameters have been removed from QApplication,
so tests don't need to ignore them anymore as they should no longer be
supplied to any test.
Change-Id: Ic59e38ddfa3303e760645ed1782a211340ce70f2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The subtests are intended to be executed by tst_selftests and therefore
don't need to have "CONFIG += testcase", which causes 'make check" to
treat them as stand-alone tests.
Change-Id: I1b47e0186be99c591bb1e03bbec6386518f8a449
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QT_DEPRECATED is defined by default by the logic in qglobal.h, but
QT_DEPRECATED_SINCE is evaluated before that definition, making
QT_DEPRECATED_SINCE evaluate to 0, disabling all deprecated code (even
though it shouldn't be disabled).
Fix this by moving the QT_DEPRECATED_SINCE evaluation to after the
evaluation of QT_NO_DEPRECATED and/or definition of QT_DEPRECATED, to
ensure that QT_DEPRECATED_SINCE works as expected.
Change-Id: I57d9f6a3e1859b0057fd4f37bcf2d2cc3dfba230
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is needed by QtScript, so we need to keep it for now.
Change-Id: Iee6bd7daf7e86a09242523f5aca72ede413a6981
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Copy and paste the ARM code into the MIPS dir, there is no lithium
support in MIPS right now.
Change-Id: I21491d36da2a4ac4cb6898c47b0e5bd37a733b41
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
2008d2d40e was not rebased properly and
should have used the V8_TARGET_ARCH to add the MIPS code to the build.
Change-Id: Idf0c183fca63da0fa9f9aa8d091a764b88c888f5
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Make the test object names correspond to the test program names, so that
it is easier to see which test produced each block of test output.
Change-Id: Ib19a955938b549f27cdcaac83bfa9150285b396d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QApplication::setGraphicsSystem() is a no-op, and even if it wasn't it
would be unwise to force a graphics system that isn't guaranteed to be
included in the Qt build, without including any logic to skip the test
if setting the graphics system failed.
Change-Id: Id9a0a87586872088625de7840b5032d0c3cc48a1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test uses qt.conf to enforce a predictable tests install location.
This was not working in the shadow build case, as qt.conf was only
present in the source tree; embed it as a resource at :/qt/etc/qt.conf
so it works in the shadow build case too.
Change-Id: Iec708d9686c29a1fc5ff0020dc11a93a593d20c5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
It's not used anymore since we have switch to HarfBuzz on Mac.
Change-Id: I68252fbe3021f54dacac5a901184c3f3e541a6b7
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
From where it is forward declared to where it is fully defined.
Change-Id: Ie2240ffef6d1edbbbd5b193f9528ef94ef412d82
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These were used for foreground/background color.
Since we have proper functions for these two now,
the hack with invoke_method is no longer needed.
Change-Id: I66eb645124caa838adb1ceb41383a2724a45f553
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
As discussed on qt5-feedback / development lists.
Change-Id: If1733369d12daa29054776ec2cbd78e63679768e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In tst_qsql, there are function calls to QApplication(argc, 0, false), where
argc is zero. According to the documentation, argc must be greater than
zero and argv must contain at least one valid character string. The
misuse of this API has no problem on any platform other than Mac OS. This
commit has fixed the crash by passing valid dummy parameters.
Task-number: QTBUG-22811
Change-Id: I42b26d66f0becb7a942896e6ddcaea52ff720a48
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
After commit 79f675a1e0, the connect and
disconnect callback API effectively becomes useless. Now that these
callbacks cannot/do not, it makes little sense to keep the backdoors
added for Qt Jambi support.
Remove them for now. Should the Qt Jambi team want/need to port to Qt 5,
we can re-add them, possibly designing a better API for doing so as
well.
Change-Id: I6209a1d647d683c979d5294b632b8c12c0f9f91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QtQuick and related APIs (QQuickItem, SceneGraph, et al), which
used to live in the QtDeclarative module, have moved to a new
module, QtQuick.
Existing projects that use QtQuick-specific APIs should add "quick"
to their project's QT variable, and update their include statements.
E.g.,
QT += declarative
should be changed to
QT += declarative quick
and
#include <QtDeclarative/qquickitem.h>
should be changed to
#include <QtQuick/qquickitem.h>
and similarly for the other QtQuick classes.
In order to give existing projects a chance to migrate smoothly, we
should issue a warning and automatically add the QtQuick module if
only the QtDeclarative module was specified. (If a project doesn't
use any QtQuick APIs, the warning can be ignored -- but there is no
way to disable it.)
This change, along with the compatibility headers in QtDeclarative,
make it possible to build existing projects without any modifications
on the project's side.
This change will be removed at a later time; when that happens,
existing projects that did not port to the QtQuick module will no
longer build.
Change-Id: I56abcadc1e5c74490527fc03646310d801bfc084
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSqlRelationalTableModel doesn't follow relations on the first column
of a table. The DisplayRole and the EditRole for indexes on column 0
are always the same. The bug is found in QSqlRelationalTableModel::data.
Task-number: QTBUG-20038
Change-Id: Ie1e98b5f46ffc171113f2d51b9b19ff5febb1c3c
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
As it was in Qt4 and discussed on the cmake list.
Change-Id: Ide77c2525a261a5d658d7cb661010a67d3386341
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.
Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.
SC-break-rubber-stamped-by: Lars Knoll
Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement AccessIbleChildrenAttribute and
accessiblityHitTest.
Change-Id: Ia9fa80e3015edbb969d173a2587cb53b9c69852e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
