The existing symLinkTarget() always resolves the symlink target to an
absolute path; readSymLink() provides access to the relative path when
that is how the symlink references its target.
[ChangeLog][QtCore][QFileInfo] Added readSymLink() to read the symlink's
raw target, without resolving to an absolute path.
Fixes: QTBUG-96761
Change-Id: I360e55f1a3bdb00e2966229ea8de78cf29a29417
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes it possible to process QML files using qmlcachegen, and
retain the file nodes in the resource file system, but remove their
actual content from the binary. To do so, you need to mark your files
with the QT_DISCARD_FILE_CONTENTS source file property.
Fixes: QTBUG-87676
Fixes: QTBUG-103481
Fixes: QTBUG-102024
Fixes: QTBUG-102785
Change-Id: I93d5a2bfca1739ff1e0f74c8082eb8aa451b9815
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: hjk <hjk@qt.io>
These tests exhibit weird crashes when run under ASan, but sometimes
they fail sometimes they don't. Pending more insight, just skip this
test under that configuration.
Fixes: QTBUG-109329
Change-Id: I49d940de419f7166aab0da0b8c2b44297c4b6d74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QBuffer::open() was only documented as \reimp, so its behavior
regarding WriteOnly was never actually described.
Add a test and document the outcome.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I75c49cd3f6a1961bcaece4a92a4e479bb3300d36
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no technical reason why qFatal shouldn't support categorized
logging, nor have a streaming version.
There is perhaps an API issue, that is, a streaming syntax may encourage
users to do "too much":
qFatal() << gatherLogs() << saveDatabase() << ...;
and that sounds like a bad idea in case the application is in an
unrecoverable state that requires immedate terminatation (indeed,
through qFatal). I'd err on the side of providing the extra convenience.
This commits adds overloads of QMessageLogger::fatal to support
categorized logging (note that fatal messages cannot be disabled),
the relative qCFatal macro, as well as overloads for streaming.
[ChangeLog][QtCore][QMessageLogger] QMessageLogger::fatal now supports
categorized logging, for instance using the qCFatal(category) macro.
Moreover, qFatal() and qCFatal() now support streaming of values
to be printed in the fatal message.
Change-Id: Ia57f25f5c85fca97e5fcf27eaa760dbde09cba0e
Fixes: QTBUG-8298
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Borrowed from tst_qtemporaryfile with some changes.
Change-Id: I596ddd0ac8dbe10edd63e481198064dcec15d3e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removes a warning in the build.
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215c40b40333cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unix systems have got crash loggers in the past 15-20 years, notably
macOS and Linux (abrtd, systemd-coredumpd, etc.). By setting the core
dump limit to zero, those tools should be mostly inhibited from running
and thus not interfere with the parent process' timeouts. Even for
systems without core dump loggers, disabling the writing of a core dump
to the filesystem should also help.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171d112d0671effe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This corresponds to Unicode version 15.0.0.
Added the following scripts:
* Kawi
* Nag Mundari
Full support of these scripts requires harfbuzz version 5.2.0,
this version adds support for Unicode 15.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/5.2.0
Fixes: QTBUG-106810
Change-Id: Ib06c526e49b0f01ef9f21123bcf875c6b19f2601
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The first "test1 text" test-case related to a file called test1.txt;
but the second related to a file called test2.txt; I suspect a
copy-and-paste with incomplete post-edit. In any case, change the
latter's data tag to reflect the difference.
Change-Id: I8354a3d1bd18715d6717dfd0962aa70faefbee90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was using the same tags twice each, giving no clue to the
difference between the two test-cases for each.
Change-Id: I645b01c0c4008a766e505047cb05cc22640ee129
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
These escapes were documented but not used until the version 15.0.0
of Unicode.
Task-number: QTBUG-106810
Change-Id: If48dcd80acf32989e3f47676ca3d41848a325c0e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Unix, we have the fchmod(2) system call that changes the permissions
of an open file descriptor. This commit adds a test for that, by not
closing the QFile before setPermissions().
Pick-to: 6.4
Change-Id: If5d5ef6220874ae8858efffd171255b9f20ed501
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In theory, if we succeed, the permissions should be what we set, but
let's not make that assumption. And if we failed, it might be because
the file disappeared or something else, so re-stat()ing the file is a
good idea.
Pick-to: 6.4
Fixes: QTBUG-7211
Change-Id: If5d5ef6220874ae8858efffd171255506b7bbee0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Since we had code to default to zstd as the default algorithm instead of
"Best", we ended up not compressing anything.
[ChangeLog][rcc] Fixed a bug that caused rcc not to compress files with
any compression algorithm if the --no-zstd option was present.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-106012
Change-Id: Ic6547f8247454b47baa8fffd170fddae429f82d2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Unifies our approach to calling CoInitializeEx and CoUninitialize,
removing a lot of boilerplate in the process, and also fixes a few
bugs where we would incorrectly balance our calls to CoInitializeEx
and CoUninitialize.
The optimistic approach of qfilesystemengine_win.cpp of calling
CoCreateInstance without initializing the COM library explicitly
has been removed, as calling CoInitializeEx should be a noop in
the situation where it's already been loaded.
Change-Id: I9e2ec101678c2ebb9946504b5e8034e58f1bb56a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows VMs are provisioned with shared folders that are available as
\\${COMPUTERNAME}\testshare(writable)
so we don't need to access a remote SMB server over network anymore just
to test whether our string-parsing code handles UNC paths correctly.
Add a QTest::uncServerName() helper function to the shared filesystem.h
header and use that instead of QtNetworkSettings::winServerName. The
latter is now only used in tst_NetworkSelfTest::smbServer().
Pick-to: 6.4
Change-Id: Id0da66369ad0f4a980d612de2a31a391f1192253
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The test has timed out when run on ARM in qemu. We start more threads
than the ideal count, which is likely too much for the emulator when not
running the native architecture.
Pick-to: 6.4
Change-Id: I42e11945070646551e77c10618df762a4bffc8ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's needed in QtHttpServer.
[ChangeLog][QtCore][QDebug] Can now stream QMetaType.
[ChangeLog][QtCore][QMetaType] Can now be streamed through QDebug.
Change-Id: I974d77d678137715472a3907ab1e50ba2dbaa087
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QTestLib] QCOMPARE now evaluates toString() on its
arguments lazily, speeding up the general case where the comparison
doesn't fail. This is true for the QCOMPARE functionality provided
by Qt. If you specialized qCompare() for your own types, then you
need to change its implementation in line with Qt's own qCompare()
specializations in order to enable this feature.
[ChangeLog][QTestLib] QCOMPARE calls with nullptr argument(s) will
now print the actual and expected values upon failure.
Previously it was not like that because of the compareHelper()
overload in qtestresult.cpp that treated the presence of
nullptr-arguments as a reason to ignore formatFailMessage() call.
New implementation does not have this check, and correctly
executes formatFailMessage() for all arguments.
Note that the qCompare() overloads that call QTestResult::compare()
internally were not affected by this patch, because they already
defer toString() invocation until the comparison fails.
Some numbers, collected against shared release developer build.
I checked how this change affects the test execution. The idea was
to pick some tests for types that do not have a specific
QTestResult::compare overload, so I picked a couple of QByteArray
tests.
The comparison is done by running a test 10 times and taking the
average execution duration, as reported in the log.
tst_qbytearrayapisymmetry:
Before: 15.6 ms
After: 14.2 ms
tst_qbytearray:
Before: 41 ms
After: 36 ms
The benefit is around 9% and 12% respectively.
Fixes: QTBUG-98874
Change-Id: I7d59ddc760168b15974e7720930f629fb34efa13
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The compare() implementation made its actual and expected seem to have
different types (using a typedef name for one, when the other was of
the type that expands to) and the formatter it used was needlessly
clunky. Use modern string literals and package a repeated
null-or-quoted representation as a lambda, inline the resulting
simplified prettyElement() into prettyPair(), which can now just take
a pair rather than an iterator. Short-cut the empty list so that the
comma-joined accumulation could initialize with the first entry and
loop over the rest, always joining with a comma.
Undo commit f776595cc10aaafc7162f382a8fa11afffb0e708's mistaken update
to the copyright header and update correctly.
Change-Id: I99258dafa01e79f9ec384d9b375a59376eb7fb53
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
It's not necessary, and it breaks the qttools build (where we have a
global variable named 'id'), and thus will most certainly build a lot
of existing user code.
Amends e47c22480f.
Change-Id: I97a91c2cb23fdae65143cf14c81570cf88d529d5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Assorted QMetaType and QVariant methods deprecated in Qt 6 were still
in use - the deprecation warnings were suppressed by setting
QT_DISABLE_DEPRECATED_BEFORE=0 - fix them and clear that suppression.
Change-Id: I1aa8f45dcb5a18449b060b346c80ad70536896ab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Retain the macro, so as to automate checking
QTest::currentTestFailed() after return from the lambda.
Change-Id: If5873a533224ea3b809cef02255642a7d071d642
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Give the macro and its parameters clearer names, wrap the macro body
in do {...} while (0), use QCOMPARE() rather than QVERIFY()ing
comparisons, convert the result type to QMetaType::Type rather than
QVariant's deprecated equivalent, save one macro parameter by using
decltype() on another. Simplify one check by pulling out a common
sub-expression as a local variable.
In the process, give the settings keys meaningful names rather than
just "key" with a numeric suffix.
Ideally this test would be reworked to be data-driven, instead of
using macros, but the use of qvariant_cast<> to convert a read-back
value, along with the variable type of the input value compared to the
result of that cast, precludes this (as far as I can see).
Change-Id: I4e083cd0dea14d723910873829352e15740006bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move the large block unrelated to the macro-driven parts to before the
macro is defined. This makes it clearer that it has nothing to do with
the macro-driven part of the test. This is, in any case, a more basic
test of behavior, so may as well go first. Rename the tested key in
the process.
Change-Id: I783fcd812e36320e9bb9765bab3ec09b56d6e6e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
