QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Use QFINDTESTDATA to set the working directory
and change the profiles accordingly (as in
the qprocess-test).
Change-Id: I332038728c64214f73ced448e1466ad96c11b3b3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The duplicated hash tables in QGuiApplicationPrivate and
QApplicationPrivate are now unified into one single hash table in
QGuiApplicationPrivate. This also reduced the number of lookups.
The extra processing needed to keep the touch points' first/lastPos
values in sync is now done only once, in QGuiApplication. This
eliminates the performance penalty (for widget-based apps) that was
introduced during the QPA migration.
As an added bonus the patch adds support for touch events arriving
simultaenously from multiple devices. This was broken before: As there
is no guarantee that two devices/drivers will not send touch points
with the same ID, using structures with only the ID as key is
wrong. The proper key is composed of the device ID (that is, a
QTouchDevice pointer) and the touch point ID.
The exported internal function qt_translateRawTouchEvent() has been
removed. This function cannot work properly in the QPA world: It
injected touches into the widget subsystem (QApplication) only which
is wrong, and would result in half-filled touch events due to not
routing the injected data through QGuiApplication. Autotests using
this function are migrated to
QWindowSystemInterface::handleTouchEvent().
Change-Id: I7632781d77f9e0ac4626fd7c9933511c94492156
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The capability flags indicate which information is valid in the touch
points. Previously there was no way to tell if e.g. the value returned
by pressure() is actually the value provided by the driver/device or
it is just something bogus due to pressure not being supported.
The points' flags return information about the individual touch
points. One use case is to differentiate between touches made by
finger and pen.
Velocity, if available, is now also exposed.
Each touch point can now contain an additional list of "raw"
positions. These points are not reported individually but are taken
into account in some way by the underlying device and drivers to
generate the final, "accurate" touch point. In case the underlying
drivers expose these additional positions, they are made available in
the lists returned by the touch points' rawScreenPosition().
The raw positions are only available in screen coordinates to prevent
wasting time with mapping from global positions in applications that
do not use this data. Instead, apps can query the QWindow to which the
touch event was sent via QTouchEvent::window() and can call
mapFromGlobal() manually if they need local raw positions.
The capability and device type information is now held in a new
QTouchDevice class. Each touch event will contain only a pointer to
one of the global QTouchDevice instances. On top of type and
capability, the new class also contains a name which can be used to
differentiate between multiple touch input devices (i.e. to tell from
which one a given QTouchEvent originates from).
The introduction of QTouchDevice has three implications: The
QTouchEvent constructor and QWindowSystemInterface::handleTouchEvent
need to be changed (to pass a QTouchDevice pointer instead of merely a
device type value), and each platform or generic plug-in is now
responsible for registering one or more devices using the new API
QWindowSystemInterface::registerTouchDevice.
Change-Id: Ic1468d3e43933d8b5691d75aa67c43e1bc7ffe3e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Which currently causes tests not to compile on Windows
due to missing symbols in QtWidgets (QSound::QSound() ,etc).
Change-Id: I87f0a403e61c3a67f9a758f114e33db1012e33e8
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QTRY_VERIFY waits for a condition to become true while regularly
processing events. There is no need for a custom solution to this
problem.
Change-Id: Ia65c90cbdb165b543f5c78f9bac3cfadd77dfb3f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTRY_VERIFY waits for a condition to become true while regularly
processing events. There is no need for a custom solution to this
problem.
Change-Id: Ia23e2fb61cdc5c3a3a8a729cd4356ba930fe7cb7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Four of the modified files only use functions from network-settings.h
on Windows, and the other three files don't use anything from that
header.
Change-Id: Ifa4b0319d14367735b859e538921fa0eeeccce1a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
So that it won't just return "Helvetica" that may not exist in
target system. Providing it seems to fix QTBUG-21833 as well,
thus we can remove the QEXPECT_FAIL statement in qlistview test.
'_' appears to reach the minimum right bearing in some fonts.
Task-number: QTBUG-21833
Change-Id: I2340af6ee736083ec4f6575e469840ebec4e545e
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
When combined with http://codereview.qt-project.org/8644, the test
crashes. This appears to be due to a column of the view being deleted
in response to calling setCurrentIndex(), as documented in QTBUG-22707.
This commit must be merged at the same time as
http://codereview.qt-project.org/8644.
Task-number: QTBUG-22707
Change-Id: I075be7df5d9196e37e2286e61d317086a76a167d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The QMacStyle is not built as part of QtWidgets at the moment (see the
TODO in src/widgets/styles/styles.pri), so disable the test for now.
I've included a comment in styles.pri to re-enable the test once the
style is done.
Change-Id: Ia6ea130135586f107ba257bf2c6c2c7187a830b6
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Fixes an error in QIntValidator, which occurred because
locale.toInt() was missing a parameter for base value and this
led it to presume wrongly that a base 8 is in use.
Task-number: QTBUG-21602
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
(cherry picked from commit ee3f763f3642d1a098e6293fbc586b34a3e6e8be)
Change-Id: Iee3f763f3642d1a098e6293fbc586b34a3e6e8be
Handle mouserelease only if mouse is pressed in QGroupBox.
Task-number: QTBUG-19170
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
(cherry picked from commit df819cfe17f6dfd089096063524932fc4975804f)
Change-Id: Idf819cfe17f6dfd089096063524932fc4975804f
The implementation of QProgressBar::setMinimum and setMaximum did not
repaint the widget. This caused the widget to be shown incorrectly in
case you call setMinimum or setMaximum but not setValue.
Task-number: QTBUG-22121
(cherry picked from commit b1998f4f59c3b10700963b2d13a17a0cc77ef665)
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Change-Id: I331d37ab4451d9e096cdf91a9e0a0286bc3cdffb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Available on plain text for now, html support still pending.
Change-Id: I0818b97874e80c8c1b33a9127aa7bb3330a8761d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qabstractprintdialog test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Ic09a03ed405bf6f85917410a7a86e17f2fe22cba
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Commit 0fd8514a57 ensured that
the showAsTool test function is now properly QSKIP'ed for
platforms where it is always known to fail.
This change re-enables the test case as a whole so that
the passing test function may actually catch real Qt bugs again
(without being ignored by CI).
Task-number: QTBUG-22453
Change-Id: Icfe56558f8c0f4b50dbbc21d9748df6d81fea4fe
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qmenu test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: I62cc1a2a9b0206595808deafb5fc137888ec97b3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qinputcontext test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Ib1d4946ab29e67e0e72f4f9c6a7bf39b65d0f6be
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Tentative commit string allows input method to notify editor
what is expected to be committed in the place of preedit.
This commit adds such support in QLineEdit.
Change-Id: If855619bc6843652db0d6254f7e7063bb8ad0936
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Removing warnings from the test function as QPixmap::grabWidget()
is being deprecated.
Change-Id: I26ad1e9def0bebe8e4ee997068ba593245d0cd05
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qlistview test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: I029be60c16cdff5ee3e38889d2780f1ee7d01b51
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This unstable test is preventing some good changes from being
merged. Further investigation needs to follow, so people can
refer to QTBUG-22544 for a real fix.
Change-Id: I038e5f340ccd2562d0e67428af595a2bcfc8c11d
Reviewed-by: Olivier Goffart <ogoffart@kde.org>
The unreadable() test function has been disabled since before the tests
were imported into the Qt repository. The idea of the test seems valid
(though the original implementation failed to correctly create an
unreadable file), so it should be re-enabled.
Change-Id: I94634bc5785dfbfbb42ca975badaead7fe812b29
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qgraphicsitem test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: If311bc61801d2a279c274928ae7f0faeb595eeb3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qgraphicsview test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: I6b8eb09000ece789b990a2dd697cdb8b47cc8e1c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qgraphicsscene test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Idd229532787ce8138d8e1c86daf1f91b90e87e38
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test function has been disabled since before the tests were
imported into the Qt repository in 2006, but seems to pass today, at
least on Linux.
Change-Id: I8ff90a11a0fbb260d66b20ae735b5f21c450a5af
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed test data has been disabled since before the tests were
added to the Qt repository in June 2006, and was incomplete (the
"pattern" field was missing).
Change-Id: I974d03a4dcca76ba1a20f740372702612c8ce02b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already disabled when first committed in January
2009.
Change-Id: I00a82f2e673fee76869cc76d756c36d081da2d2a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already disabled when it was first added in June
2006, and is based on assumptions that no longer hold true.
Change-Id: Id7941d46e2a993aac422554dcc5540eb64eac492
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove a couple of "#if 1" directives (but not their contents), which
have been present since before the tests were imported into the Qt
repository in 2006.
Change-Id: Id43aff37843e7a44ed96973f809de3838ba0e5b9
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove some "#if 1" directives and a line of debug code.
Change-Id: Ib34f5b65470a24ee499799525ffe0645ccc117fe
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was disabled in January 2007. The commit history does
not make clear what the code was supposed to achieve and the code
doesn't do what the comment at the top says (that looks like a TODO).
Best to delete it and start again.
Change-Id: I42b6b1d865c96518d74dc189a4a41d0d2776e5bc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qgraphicswidget test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Ic484fde3492f077453f47a959dd6dc862288dcaf
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: I80691b274d9d2abda72bca894ace9de545410ed8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There are two cases where a QCOMPARE may fail on some platforms. Rather
than disabling the QCOMPAREs with "#if 0", use QEXPECT_FAIL so that we
can look in the CI logs to see which platforms fail.
Change-Id: Ife93c8032e01a04e8068bf213e2040778c12f711
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: Id4efb74a2d3646f3554b643762beefba113c3602
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: Ifd2bbd17677e16ddb0f1846287d722cdae76d984
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The commit that disabled this test a few days after it was originally
comitted (bda80c4b in the grafted history) makes it clear that this
test was never valid.
Change-Id: Ib0090fc35d0b9251d7b7367de2c71a66a332c567
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Originally this commit was just going to reinstate the disabled line of
test data (after correcting it to use keyboard modifiers instead of
invalid bitwise-or of key-codes, which would trigger an assert in
qtestlib). Unfortunately, this revealed a minor bug in QMenu, as
reported in QTBUG-22449, so a QEXPECT_FAIL has also been added.
Change-Id: I29699fcbfa353c037a83379a6140f0e3da5be027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test for keyboard navigation was only checking correct highlighting
when a menu item was not activated by the latest key-click. It should
also check that no item is highlighted after an item is activated.
Change-Id: I443e154be5cdc2def4f12d3f0abab2cc1bc6e4a8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Allow passing of null windows or widgets to keyClick().
In that case route the event through the normal Qt event
processing. This allows e.g. shortcuts to catch the
key event.
Change-Id: Ic9455ea9be5164918b1c0bccbd58dd32eae74ff1
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The removed code has been disabled since it was first added in October
2006.
Change-Id: I10243aa2979fd1615c919ec522d10d77d6527b3b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed test was disabled in February 2007 because it did not work
cross-platform. The comment that was added at the time claims that the
functionality is covered thoroughly by other tests, but even if that
isn't true we're not losing anything by removing this test as it is not
even useful as a starting-point for a new test due to its reliance on
random test data.
Change-Id: Ica74262082184908d02595702486803d1efff4d2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed test data was disabled by commit 83747a82 and should have
been removed at that time.
Change-Id: Ia2cef0bf4394a5b95fdf37db26369e733c7e86ec
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code used to test API that was removed in the graphicsview
refactor that was done for Qt 4.5.1.
Change-Id: I3b312b9e51114e24c6ef1191353c35688b229d99
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The relativeLinks() test function was not performing sufficient
verification steps and thus hid a regression.
Task-number: QTBUG-22416
Change-Id: I2db4d4035e7a32f3c84630c7a15408d31d85ac9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This file seems to have been forgotten when the test it belongs to got
moved -- probably because the test was poorly written and still passed
when the file couldn't be opened. The file is supposed to live one
directory up from the qtextbrowser test so that it can be used to test
opening url's with relative paths.
Change-Id: Id80965b1c73b37de75691ae3a18f909f9c6d799a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Qt has compile-time defines for determining the presence of each style
in the build. Use these to exclude inapplicable test data instead of
including all test data and then being unable to distinguish the absence
of a style from regressions in QStyleFactory.
Change-Id: Iab1756aec80892a8b587bb635779537c64b1d4dd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Compile without -qpa.
- Make Q_WS_QPA-#ifdefed sections the default in the code
- Replace some Q_WS_ by Q_OS_
- Add ### fixme for places that need checking
- Remove qpa conditionals from .pro files.
Change-Id: I6ea930afc0c236cc12a7b7e95f1b8a1c24b3a513
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Returning text "1.00" instead of "1" sounds right to me.
Checking the test before the widget is shown/validated sounds pointless.
Change-Id: Ifc9e51dc9448a5bb3afbd566fe10524fbabc654f
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
The qrc tests need further investigation.
Bring at least back the basic test.
Change-Id: I302a37b6c989af76db67716ffcf10a0960234156
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Ibd0f3f0605660c92e9bab2a3d1d9f31b52192575
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Id4cf7e8dc48f836d2c6dcde57dde87797a2fe036
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These macros should only be called inside a test function, otherwise
they cannot abort the test function correctly. Solve this by making the
helper function return a boolean result (and output a warning on
failure to help with debugging) and verify the return value in each test
function that calls the helper.
Change-Id: I599673fda49051baf80a8c94b5d85a4d8c2cb406
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Using relative paths in #include is best avoided.
Change-Id: Iacaab7b4c402dfc96f944f21c634afa6e4a2a32a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The queries were limited to current block, because that is the
available surrounding text. Input method side, however, cannot then
distinguish between anchor being really at start or end of the
surrounding text, or beyond it. Without the limitation there at least
is a way to know anchor is at unknown territory.
Change-Id: I388d33566388344ec816ea7d86662b7e36a3d7d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
