The socket engines already implemented this, but it is a good idea
to test it explicitly.
Task-number: QTBUG-25634
Change-Id: Ife3fe09b0119ed435e4055523c553847739a09fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scope ID is not set, Mac and Windows will not transmit
packets to link local addresses. This patch implements setting
the scope in the native socket engines and adds a test case.
(it was partially implemented already, though UDP specific code
paths were missed in the unix engine)
Task-number: QTBUG-25634
Change-Id: I23300bdc9856e38458078e913daaa59cd05a74b5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
After we have change the policy we should set the readbuffersize to
unlimited again, so that we try to download all data.
Change-Id: I1b9bdb6c2e5f408c920f6e6d7e85a39e4c18316b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Because SSL2 is disabled in ubuntu's openssl binaries, the SSL
connection is expected to succeed rather than fail when the server
side is using SSL3/TLS1.0.
Used the OPENSSL_NO_SSL2 macro to decide this.
Change-Id: I2c35aa5aa0c9432ae78000c81f70086bdc31843d
Reviewed-by: Richard J. Moore <rich@kde.org>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Although we created an enum for pause modes to make 5.x binary
compatible with 5.0, the enum value is not well named.
In 5.1, we propose to add PauseOnProxyAuthentication to the enum.
PauseOnNotify is not clear what it means, while PauseOnSslErrors is.
Any new notification in a minor release would need a new enum value
otherwise applications would get pauses they did not expect.
Task-number: QTBUG-19032
Change-Id: I4dbb7467663b37ca7f0551d24a31bc013968bedc
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If we're not going to verify the peer, or we know in advance that
windows won't have a CA root then don't ask it to verify the
certificate chain.
The test case started failing in CI when the windows cert fetcher
was integrated due to timing change. I've relaxed the timing
requirement of the test to avoid it being unstable.
Task-number: QTBUG-24827
Change-Id: I694f193f7d96962667f00aa01b9483b326e3e054
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The mentioned records for råkat.se cannot be resolved.
Note these were marked with a FIXME in the first place.
Change-Id: I4ea3bbb0aec8ca1b3487c44656b48a8715228886
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
These tests have been passing consistently since they started running
on Windows in CI.
Change-Id: I4505497afc477a7f4fbda0acc29987d0d0cf220a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has been passing consistently since starting to run in CI.
Task-number: QTBUG-25445
Change-Id: Id024921b18ea4ef94ad2f47d9db2ccda3212eaaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has a single stable failure on both of these platforms. Mark
the failure with QEXPECT_FAIL (that was already the case on Ubuntu
11.10) and re-enable the test.
Note also the elimination of duplicate bug numbers.
Task-number: QTBUG-24234
Change-Id: Ica11e7d1f3cd9487647127984fef7c75e0e764fe
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
And use QString::toUtf8() to recover the byte array original.
Change-Id: Ic94de12e7ac67479e85a64a86f8467428b4d22ba
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It no longer requires hardcoded configuration, and it passes on
linux, mac 10.6 and windows desktops
Change-Id: Ibaa63520dade58ce13c23cf2aba3ddbc5be1c472
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Calling peek() for qsslsocket caused socket data to be copied into
qiodevices buffer and therefore make it unaccessible in qsslsocket.
Cherry picked form 4.8-branch & modified to Qt5 API changes
(int -> qintptr)
Original commits:
commit 621f18955082fc73471e75d1f8c35c2dcd4befeb
Author: Shane Kearns <ext-shane.2.kearns@nokia.com>
commit 68b1d5c17aa38d5921bdade2b0e0cb67c6c90513
Author: Kalle Viironen <kalle.viironen@digia.com>
Task-number: QTBUG-18498
Change-Id: I6be4b19baec2f3197537f5e7b61432040ec84ad2
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the "bypass proxy for local addresses" option is enabled in
the windows proxy configuration, then do not use the proxy for
any IP address in the subnet of any network interface.
As the systemProxyForQuery api is now offering HTTP proxy tunnels
for TCP sockets, this change avoids local ad-hoc network
connections being routed through the proxy.
In the case where the local address was on a different interface to
the proxy server, it may have been unreachable through the proxy.
For example IP over USB or Bluetooth.
Change-Id: I0842732832a7795112be029d923ed168edc008d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Workaround QTBUG-24451 by retrying creation of SocketPair if it fails
(waitForConnected and waitForNewConnection are used in the factory
function).
Skip very unstable test cases due to QTBUG-25386
Change-Id: I32129922329b895eb3719d61719c487a4d52c466
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has one stable failure on CI, but that failure is not observed
by all Ubuntu 11.10 users. Mark that failure with QEXPECT_FAIL when it
is going to fail and re-enable the test, following the pattern
established for the qtcpsocket test on this platform.
Task-number: QTBUG-23380
Change-Id: Ic7546595f314c55ebd36957ada92978141a1c509
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
ConnectInBackground should be set when opening a network session
due to a background request. This test checks that.
Unfortunately, none of the bearer plugins currently in Qt Base support
this attribute, so the test result is inconclusive.
(testing with a debugger shows the attribute is set correctly, but
it can't be read back as the set is discarded by the plugin
implementation)
Change-Id: Idcf777fe489a62d4ff5007ffd291a84ba052311b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Using the policy change signal from QNetworkSession.
If the new policy disallows background requests and this is a
background request, then generate an error.
This results in a TCP RST on the socket, and a
BackgroundRequestNotAllowedError on the QNetworkReply.
If the reply is already finished, no action is taken.
Change-Id: I4ff5c681a8b7b852727bb95f03664d666f4efe07
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Ftp and Http have different implementations of QNetworkReply,
so test both of them.
Change-Id: If502fa1788110edf89e619966534eea08830a19b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This test has not failed in the last 300 CI runs.
Change-Id: I559ea223856b1460deb343384d5b4439f42a41d7
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reference tasks with detailed analysis of failures rather than generic
task for blacklisted tests.
Change-Id: Ibd0ed836ffb84fe9aa14488d43085316e666de21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
I have run the test 250 times in each of these configs with no
crashes observed, so assuming the instability has been fixed
by another change.
ubuntu 11.10 64 bit
ubuntu 10.04 32 bit
windows 7 msvc2010 64 bit (debug)
windows 7 msvc2010 32 bit (release)
Task-number: QTBUG-20686
Change-Id: I02bab165c263cf79684c7723eae1e278839b1e37
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Avoid the conversion to a temporary QString -- just hash the address
as a byte array.
Change-Id: Ic35cdbbc3ee66c32a28d911bd27de0092395979f
Done-with: Shane Kearns
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Way back in the mists of time, someone added SO_REUSEPORT to socket binding,
which was great, because otherwise it meant that multiple UDP sockets couldn't
share the same port on OS X (as platforms with SO_REUSEPORT apparently don't
support rebinding with SO_REUSEADDR).
However: SO_REUSEPORT also means that *any* bind on a port will succeed, which
is most definitely not wanted in the case of TCP sockets, so check the socket
type before performing the actual bind.
Also test that multiple listens don't take effect.
Change-Id: I2f8d450bcfb8a7f3abd8918a4e789a850281dd13
Done-with: Thiago Macieira
Done-with: Shane Kearns
Task-number: QTBUG-6305
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On OS X and Windows, this was not working, because the socket was being bound
in v6 mode (due to ::Any being for dual mode), but the address passed was a v4
address, meaning it took the wrong codepath. Linux, strangely, apparently works
anyway.
This is fixable in OS X (by using the v6 join path when bound in v6/dual mode),
but the same fix doesn't work on Windows, failing with WSAEADDRNOTAVAIL.
Don't allow this behaviour, and provide a sane error message telling the user
what to do instead.
Done-with: Shane Kearns
Task-number: QTBUG-25047
Change-Id: Iaf5bbee82e13ac92e11b60c558f5af9ce26f474b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
When FTP login fails we fail to remove the entry from the cache.
This is because the cache key is created from the url with the
userInfo. So this needs to be set again to match the key used
when inserted.
Task-number: QTBUG-11824
Change-Id: Ib3fd2d737581653ae59c56d0810d42e2d8dc2176
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The new code now generates lowercase hex instead of uppercase, so
adapt the unit tests to pass.
Also, "123.0.0" is now considered valid (compatibility with inet_aton).
Change-Id: I07b5125abf60106dc5e706033d60836fb690a41f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QSharedPointer is about to become final.
Instead of inheriting from it to add implicit
conversions to and from QSslSocket*, make
QSslSocketPtr a typedef, and make the
conversions explicit.
Change-Id: I4eebb262ab5aef348f4d676f9e839325d4ed13da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSharedPointer isn't meant to be used as a
base class.
Instead of inheriting from it to add implicit
conversions to and from QNetworkReply*, make
QNetworkReplyPtr a typedef, overload two
oft-used functions to take a QNetworkReplyPtr
in addition to QNetworkReply*, and otherwise
make the conversions explicit.
Change-Id: I1eff1793a19f2d5bad1cce8de74c0786675a50f3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The DNS server can legitimately include NS and A records for
the authoritative name server in addition to the DNS records
that were requested.
These are now ignored when checking the reply (we only check
results that match the query, rather than failing if a result
is for a different host name than the query).
Task-number: QTBUG-24698
Change-Id: I327f31d58cdca50c7df6b32b275d7f28b56405f0
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This is unfortunately still "most of them", because of QTBUG-24451
however some of the unit tests are still possible to test stably.
Also skipped test cases which would hang forever due to QTBUG-24451.
Bearer tests are not run, because they pass when test machine has no
wireless LAN, but fail or hang if it does (QTBUG-24503)
Change-Id: Icf99d45707102d2ef9219ed0b5ad521605716219
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rather than requiring specific hardcoded proxies in the system,
it now checks the proxies returned by the system have the required
capabilities for the request.
Note the test will pass if no proxy is configured (as
QNetworkProxy::NoProxy has all required capabilities)
The test prints the returned proxy lists and elapsed time
diagnostic for manual comparison and debugging.
Change-Id: I621ef4d1d7264a98c3e8bd485c30bc1166fcbdf0
Task-number: QTBUG-19454
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's unstable on all platforms, because the reply can be finished
due to a race with the http thread. It isn't crashing (which the
test was trying to test for), but rather the QVERIFY(!reply->isFinished())
fails, which is an inconclusive verdict.
Change-Id: Ib815a7cedd220544a0c9cb83023e3334df4a0fb3
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
