It was added only to maintain source compatibility with Qt Mobility.
Change-Id: Iea8d40e401bd1f8d5115268e09b256eacca69ea0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Introduce QTRY_VERIFY_WITH_TIMEOUT and QTRY_COMPARE_WITH_TIMEOUT
to be able to specify a timeout value.
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: Iaeaa4938eb14f2c431537055f626510cba183ce3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
We are now directly passing the standard out/err handles to
CreateProcess instead of reading the output and writing it.
The downside is, that we cannot automatically forward the process
output of GUI applications anymore.
This behaviour is intended by the CreateProcess API.
Change-Id: Ic6e35c8c338dbea1a9f345567a37d938da1f34a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This is a source incompatible change.
This is for consistency with the signal for the lifetime of Qt5. I could
imagine people trying to override a virtual function (in a new class while
using the Qt5 library) with the arguments of
the signal and have that fail due to the arguments not being correct.
It also allows ignoring dataChange events when they are known not to be for roles
which are relevant to particular views or delegates.
Change-Id: Ica191835125c1c8fdaf665debb62d635e81700dc
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Most autotest .pro files should look like this:
CONFIG += testcase
TARGET = tst_something
QT = core testlib
SOURCES = tst_something.cpp
Change-Id: I051b230c5c4fd56dc6eae2b9b7bdff6c033248fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It is a source incompatible change, but I believe it is safe to say that it is
a small change, which doesn't affect many people.
Change-Id: Iad11befe4cca60484cf4e04cd3049c93a4ea5faf
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is particularly useful for situations where the user might really want to
be notified about a failure, for instance, in a backup application.
Empty paths are not treated as an error in calling, as the user code cannot
really do anything sensible to handle this error, but empty paths should not be
used.
Change-Id: Iddb44fd39f4e3fac5c3f9f60fb7999e1833280a8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This change makes Qt load the default openssl config always, not just
when compiled with OPENSSL_LOAD_CONF. This means that facilities like
openssl engines (and their configuration) are usable. An alternative
would be to call OPENSSL_config(NULL) ourselves, but that's exactly
what the OPENSSL_add_all_algorithms_conf does for us.
Task-number: QTBUG-16018
Change-Id: I4cda701f82627e0541b6225009f4e1249aec9d47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The value is changed to true. It is a common bug that developers expect
this proxy model to reflect the source model when the source changes.
That requires setDynamicSortFilter(true), so we change the default to
optimize for the common case.
Change-Id: I9bf7efdbda10309fa77aed9391c33054aaae4a29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This was an internal function that used to act like qsnprintf() but also
filtered unprintable characters out of the test output. The filtering
has been moved somewhere more appropriate and this function is no longer
used by testlib.
Unfortunately, the function was exposed in the public API due to its
former use in the implementation of a public macro.
In the unlikely event that any code outside testlib calls this function,
the call should be replaced by calling qsnprintf(), which comes from the
QtCore/QByteArray header.
Change-Id: Iddc17b4361d16ebddd19346ae7d1064951dd7738
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The duplicated hash tables in QGuiApplicationPrivate and
QApplicationPrivate are now unified into one single hash table in
QGuiApplicationPrivate. This also reduced the number of lookups.
The extra processing needed to keep the touch points' first/lastPos
values in sync is now done only once, in QGuiApplication. This
eliminates the performance penalty (for widget-based apps) that was
introduced during the QPA migration.
As an added bonus the patch adds support for touch events arriving
simultaenously from multiple devices. This was broken before: As there
is no guarantee that two devices/drivers will not send touch points
with the same ID, using structures with only the ID as key is
wrong. The proper key is composed of the device ID (that is, a
QTouchDevice pointer) and the touch point ID.
The exported internal function qt_translateRawTouchEvent() has been
removed. This function cannot work properly in the QPA world: It
injected touches into the widget subsystem (QApplication) only which
is wrong, and would result in half-filled touch events due to not
routing the injected data through QGuiApplication. Autotests using
this function are migrated to
QWindowSystemInterface::handleTouchEvent().
Change-Id: I7632781d77f9e0ac4626fd7c9933511c94492156
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The overload is used in Qt Creator
(see src/libs/extensionsystem/pluginmanager.cpp).
The use case here is an application whose internal
QObjects can be tested by passing a command line parameter.
For this use case, it is inconvenient to have to allocate
memory and create a char argv[]- array.
This reverts commit ad80d42f8e.
Change-Id: I2a2f91e2840100fd62743f6d03b33005d67b18f8
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The capability flags indicate which information is valid in the touch
points. Previously there was no way to tell if e.g. the value returned
by pressure() is actually the value provided by the driver/device or
it is just something bogus due to pressure not being supported.
The points' flags return information about the individual touch
points. One use case is to differentiate between touches made by
finger and pen.
Velocity, if available, is now also exposed.
Each touch point can now contain an additional list of "raw"
positions. These points are not reported individually but are taken
into account in some way by the underlying device and drivers to
generate the final, "accurate" touch point. In case the underlying
drivers expose these additional positions, they are made available in
the lists returned by the touch points' rawScreenPosition().
The raw positions are only available in screen coordinates to prevent
wasting time with mapping from global positions in applications that
do not use this data. Instead, apps can query the QWindow to which the
touch event was sent via QTouchEvent::window() and can call
mapFromGlobal() manually if they need local raw positions.
The capability and device type information is now held in a new
QTouchDevice class. Each touch event will contain only a pointer to
one of the global QTouchDevice instances. On top of type and
capability, the new class also contains a name which can be used to
differentiate between multiple touch input devices (i.e. to tell from
which one a given QTouchEvent originates from).
The introduction of QTouchDevice has three implications: The
QTouchEvent constructor and QWindowSystemInterface::handleTouchEvent
need to be changed (to pass a QTouchDevice pointer instead of merely a
device type value), and each platform or generic plug-in is now
responsible for registering one or more devices using the new API
QWindowSystemInterface::registerTouchDevice.
Change-Id: Ic1468d3e43933d8b5691d75aa67c43e1bc7ffe3e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The overload of QTest::qExec() that takes a QStringList is not used
anywhere in Qt's autotests, despite having been in the qtestlib API
since Qt 4.4.
This lack of use most likely derives from the fact that none of the
QTEST_MAIN macros use the overload, and more than 99% of Qt's tests
use those macros to avoid explicitly calling QTest::qExec().
Change-Id: I264b21d7fe1a9f2d565f748cf8bbe32414a73bb0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Which currently causes tests not to compile on Windows
due to missing symbols in QtWidgets (QSound::QSound() ,etc).
Change-Id: I87f0a403e61c3a67f9a758f114e33db1012e33e8
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is a source-incompatible change.
TlsV1 is ambiguous; what is actually meant is TLS version 1.0. There are
also TLS versions 1.1 and 1.2; we might want to add options for these
once OpenSSL supports them (apparently they will be with OpenSSL version
1.0.1).
Change-Id: I940d020b181b5fa528788ef0c3c47e8ef873796a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt 4.x the serial number is reported by a mixture of the hex value
and the number, The hex is what is used by other tools, and we should do
the same.
Change-Id: Ia0361d43fb5b920d053c95e932e0c8a012436e5e
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Currently isValid wrongly gives the impression it checks a certificate
for validity - it doesn't. It merely checks if the certificate dates
are valid and if the certificate is blacklisted. Since it's already
easy for users to check the dates, let's just give them access to the
ability to check for blacklisting.
Change-Id: I25be3bde6a01063034702a9574b28469bf4882cd
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The standard IPv4 loopback address is 127.0.0.1, however anything in
the 127.0.0.0/8 range is also a loopback address.
isLoopback returns true for any address that is in the IPv4 loopback
address range, or is the single IPv6 loopback address ::1
Task-number: QTBUG-22246
Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
create() is symmetric with destroy().
Also rename the internal methods and fields to be
consistent (qDeleteHelper already had the "right"
name, though!).
This change will allow us to use construct() and
destruct() for something else: Placement new-style
allocation (QTBUG-12574).
The old construct() is still kept for now, until
the other repositories have been updated to use
create().
Change-Id: Iceb184af6cffcb0a634359cfc3516c718ba0c2f5
Reviewed-on: http://codereview.qt-project.org/6342
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QInputContext is migrated to QInputPanel, which allows only one
instance.
Change-Id: I4912164790d5a6bdff41e11cbe4bc4e2f9f111ec
Reviewed-on: http://codereview.qt-project.org/5641
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
this makes QCoreApplication::translate() consistent with
QTranslator::translate(), and is semantically cleaner.
users wishing to shrink their QM files can do that properly by using
lrelease -removeidentical.
Change-Id: I2b367314cfb985c3d130c7c6347e2742311f497a
Reviewed-on: http://codereview.qt-project.org/5165
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: hjk <qthjk@ovi.com>
The build-key is an old mechanism to work around binary
incompatibilities in GCC 3.x versions. Modern GCC has not broken binary
compatibility since 3.4, making this mechanism obsolete.
The cache value stored now only includes Qt version, the debug/release
boolean, and the last modified time for the plugin. Old 4-value keys
will be replaced with new keys as the plugins are reloaded the first
time.
This also removes QLibraryInfo::buildKey(), which is a source-incompatible
change.
The UNIX and Windows configure tools have been updated to stop
outputting the QT_BUILD_KEY preprocessor directive.
See also:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000892.html
Change-Id: I7d06969a370d3d2c6de413c1230d9d6789cbf195
Reviewed-on: http://codereview.qt.nokia.com/3977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
... and add a new method subjectAlternativeNames() instead. This was
a typo in the API.
Change-Id: Id8704c387c9ff8e1af2b9a524ff628f5c053a294
Reviewed-on: http://codereview.qt.nokia.com/2618
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
According to the C++ standard, there is no guarantee that
you can cast between function pointers and void pointers
without data loss (section 5.2.10-6).
Change-Id: I27f4d835e4c8ca8ecca0d76cfea9ce34491956bd
Reviewed-on: http://codereview.qt.nokia.com/1995
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
this makes the version based checks a bit simpler (and thus faster)
Change-Id: I975c6d043d238a5c16a4b13f8379e87fbade23cc
Reviewed-on: http://codereview.qt.nokia.com/1586
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
there is no such category in the Unicode specs. the QChar::NoCategory
was a subject of bugs since it was introduced. int 4.6 it's meaning was
limited to mention ucs4 > UNICODE_LAST_CODEPOINT only (which is useless anyways)
in order to preserve the old (wrong) behavior.
fix it now for qtbase
Change-Id: I630534824e071090b39772881e747c1fdb758719
Reviewed-on: http://codereview.qt.nokia.com/1584
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
