result was never returned by resolveDeviceMkspec
Change-Id: Ibd2f647e5524cdc9dbf4ea06f7b815f9dcc43212
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Specifying -device linux-amlogic-8726M-g++ is error prone. With this
change, one can specify any substring of the mkspec names under
devices/ and the first one will be picked.
Change-Id: I7c4522fdaefe4a11e9292f7831075aa766a62c0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In at least one case found in our testfarm, the compiler runs into an
ICE (Internal Compiler Error) compiling the new AVX code. The error it
reported was:
fatal error: error in backend: Cannot select: 0x7fbf1aa42210: f64 = sint_to_fp 0x7fbf1aa88a10 [ORD=1936] [ID=37]
0x7fbf1aa88a10: i32,ch = CopyFromReg 0x7fbf19538768, 0x7fbf1a9f2610 [ORD=1936] [ID=27]
0x7fbf1a9f2610: i32 = Register %vreg38 [ORD=1936] [ID=9]
As is the nature of ICEs, juggling the code around will probably make
it pass. But since I have plenty more AVX changes pending, which make
the code even more complex, it's also very likely that this issue will
happen in other places. For that reason, I choose to blacklist the
compiler instead.
Change-Id: Ide3201f0cc49c7ceb63e966f6de65a8315cbea4b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store PKG_CONFIG_SYSROOT_DIR and PKG_CONFIG_LIBDIR for the usecase of
cross compilation in qconfig.pri. They will get picked up by
pkgConfigExecutable() in qt_functions.prf used from link_pkgconfig.prf
as environment for pkg-config calls.
Change-Id: I7d0de05c0bd21b435275fc26c66a80035ba30970
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Modern versions of Xcode properly support dwarf2, and as such dwarf2 is
always enabled. This change removes the ability to turn it off, making
dwarf2 non-optional.
Change-Id: I149daeae6048ee8a1ed116363572173ad219102e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Mostly straightforward porting: Add configure test from Qt 4. Add X11
include to qgtkstyle_p.cpp. Use renamed QGuiApplicationPrivate::showModalWindow.
Change-Id: I83020e13ec00b49f3fe346814f881bce19a6f602
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Let configure generate the QT_QPA_DEFAULT_PLATFORM_NAME in
qconfig.h. This allows us to override the platform name
using a configure argument.
This commit adds -qpa <platform> that lets the user specify
the default platform at configure time. Note that the default
platform is not checked against the tree since plugins are
allowed to exist outside the Qt source tree.
In the absence of -qpa argument, configure checks the mkspec
for a variable named QT_QPA_DEFAULT_PLATFORM. This check is
implemented only in the unix configure because it will be primarily
used in custom mkspecs (devices, boards).
If -qpa argument is absent and the mkspec variable is absent,
the default value is determined based on the OS as below:
Unix - "xcb"
Windows - "windows"
Mac - "cocoa"
QNX - "qnx"
Done-with: Jørgen Lind
Change-Id: I0df31811a1b901a3242bfada1232e596ebda04f4
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The build tree is not initialized when -help is passed to configure.
The mkspecs/ directory is not created and thus the mv fails results
with the following error:
mv: cannot move `.device.vars' to `/tmp/qtbase/mkspecs/qdevice.pri': No such file or directory
The solution is to create qdevice.pri just before we run config.tests.
Change-Id: Ie83018e27a03bb840d213aae8c963b0074e62bb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Some versions of the DirectFB headers are unclean and will cause Qt
compilation failures. So blacklist those versions. Version 1.5.3
(present in Fedora 16) is known to be buggy and gets disabled by this
patch.
The compile error was:
qurlquery.h:169:5: error: ‘typeof’ was not declared in this scope
(qplatformcursor_qpa.h includes qevent.h which includes qurl.h which
includes that)
The error comes from the Q_FOREACH expansion. Note that Q_FOREACH uses
__typeof__, so it's supposed to be safe, unless someone ill-advised
goes and defines the GCC "safe" macro (double underscores on both
sides) to something else.
Change-Id: Ida41ee3b3c2fcba86a7e12182e7055123166693b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The include files have a hard dependency on OpenGL (ES2); testing for the
presence of EGL support is insufficient grounds for including this
functionality
Change-Id: I391b5dbbcbef40ecf68d16617b6eb1c0bb4b799e
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of having to pass -no-xcb -no-eglfs -no-directfb, it's
better to pass -no-qpa-platform-guard which is also resilient
against future platform additions.
Change-Id: Id68bfe3688980fa273665b01b9332f5d6f359491
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Add DirectFB buildsystem integration by adding a configure target
and adding it as subdirectory to the project file. The default is
to automatically build directfb. Update the Broadcom/9425 build.
Change-Id: I482f865cebd9d5cd4c98c184773f8534f92db9df
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Currently, for host builds, pkg-config usage is autodetected based
on it's availability in the mkspec or the PATH. For xcompile builds,
pkg-config is disabled unless -force-pkg-config is passed.
-force-pkg-config is poorly named since it doesn't reflect the fact
that it applies only to xplatform builds. It is in fact the only way to
enable pkg-config in xcompile builds. And when passed, it doesn't actually
force anything since all it does is check env variables. To add to the
confusion, it prints a warning even if the env variables are setup correctly.
This patch remedies the situation. It adds (-no)-pkg-config. The flag works
for both host and xcompile builds.
By default, the value is 'auto'. In this mode, it will try try to detect pkg-config
from the path. If found, it will be used. For xcompiled builds, we use some heuristics
to determine if the pkg-config is actually usable:
1. if -sysroot is not set and the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_SYSROOT_DIR are not set, we disable pkg-config.
2. if -sysroot is set, then we setup PKG_CONFIG_LIBDIR and PKG_CONFIG_SYSROOT_DIR
automatically (provided $SYSROOT/usr/lib/pkgconfig exists).
If the value is 'yes', configure will error if it's heuristics fail to detect a usable
pkg-config.
If the value is 'no', pkg-config usage is disabled.
If the value is 'force', configure will skip it's heuristics and use pkg-config anyway.
This mode is useful, for example, when compiling for 32-bit on 64-bit systems.
This change also removes references to PKG_CONFIG_SYSROOT (PKG_CONFIG_SYSROOT_DIR
is the correct environment variable).
Change-Id: I07fc8d48603c65a60de0336fc6276e90fcb41430
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Scrolling the configure output to locate the build configuration
is painful. So save it in config.summary.
Change-Id: I40a2f7628e9a2b91a8ea44619dd49c00d5a61561
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The configure script currently automatically assumes that if you are cross
compiling, we should avoid trying to generate and strip separate debug
information due to toolchain limitations.
Historically there may have been good grounds for this, but it seems like
an aggressively pessimistic assumption which ignores the
standardization/advancement of embedded toolchains as a whole.
This assumption also extends to host compilers which deviate from the
automatically detected "platform" compiler, such as Clang.
Change-Id: Ifed2750325178bb5291d8ca1dde92925bfa36065
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since the library and almost everything got renamed to qml, we
should do so for the debugging support, too.
(CONFIG+=declarative_debug will continue to work for some time
being, but prints a deprecated warning).
Change-Id: I295155dce873e2585c1452d2bf0625ea6ce219c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure parses the compiler from the mkspecs using an awk script.
The detected compiler is then used to determine sysroot support.
The awk script is currently unable to handle loading of qmake
features and thus configure will not detect the compiler correctly.
This is the case when using device profiles. The qdevice.pri is loaded
through the qmake feature file device_config.prf.
One possible way to fix this is to move this detection after qmake is
built and make this a .pro based config.test. However, this cannot be done
because the sysroot is actually baked into the qmake binary as the
QT_SYSROOT variable.
The solution is to remove this check completely and let the build fail
when Qt starts compiling with --sysroot.
Change-Id: I6c3b7ec2c8e5e390d6f5b1e602d656682d610b98
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
-sysroot has been undocumented so far.
Change-Id: I552f9233778de9490a3479292f0cda9c8c439282
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Developers who are building & rebuilding Qt often end up needing to
recompile all other modules because of this removal even though the
libs are still compatible.
Change-Id: I4ec0e8ab222675dcd2a3f3a2b5e931c1c7f31f69
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
EGL support in src/platformsupport/eglconvenience requires OpenGL ES
to be enabled, so it makes no sense to test for the presence of EGL if
we're not enabling OpenGL ES.
EGLFS has similar requirements, so ensure it gets disabled
too. Otherwise we're going to get lots of undefined symbols in the
EGLFS plugin to things in QtPlatformSupport that did not get compiled
in either.
Change-Id: Ie55dd2e2597ec0594aa589ee8aac150c71104b46
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
PLATFORM_QPA is always true
PLATFORM_X11 is always false
remove/collapse all related conditional statements to lend greater clarity
to the configure script
Change-Id: I4998edf5402019370333ed79effcd0cacafbe87d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
This is a follow-up to comit 70a8833151.
The regular expression for CFG_HOST_ARCH was not updated in the above
commit.
Change-Id: I2baf0b42d851f1df096c2f6ad54aeec57940e661
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Intel CC 12.1 supports AVX2 but only with -march=core-avx2. The -mavx2
option produces a warning.
GCC 4.6 does not recognise any option.
GCC 4.7 recognises both -mavx2 and -march=core-avx2 so let's use the
latter for now. We may need to change to -mavx2 when there's an AMD
processor that supports AVX2 too.
Change-Id: I529240e6e6c2c0e3942d357e0320212d954fe4de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
