instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is just an excuse to let build failures slip past CI, as has
happened and been fixed recently.
Change-Id: If4356eaced0f90c7c455b21cc7676b0c9b7b1e27
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add [-no]-style-foo command line options for all widget styles, bringing
this closer in line with configure.exe. Add proper platform dependencies
and a configure test for the required uxtheme.h header on Windows. Clean
up and simplify styles.pri. Don't let configure.exe define QT_NO_STYLE_*
any more, as styles.pri does that locally anyway.
Change-Id: I81341f887a65b4e45e77380974eb79743acfad77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each library was distributed over a test and (optionally) a
'library' output of a feature. this was conceptually messy and limiting.
so instead, turn libraries into a category of their own.
libraries now support multiple properly separated sources, which makes
overriding them a lot saner. sources can be conditional to accommodate
platform differences.
as an immediate consequence, move (almost) all library references from
the config test projects to the json file.
a few tests were excluded, because they are doing somewhat magic things
that should not be handled in this bulk change:
- freetype: .pri file shared with actual source code
- clock-gettime: -lrt is conditional, and there is a .pri file which is
shared with actual source code
- ipc_posix: -lrt & -lpthread conditional
- iconv: -liconv conditional
the multi-source mechanism is used to make a variety of tests work on
windows, where the library name differs from unix (and sometimes between
build configurations). some tests still needed minor adjustments to
actually work.
on the way, fix up disagreements between manually specified libraries
and pkg-config lines (affecting several xcb-related tests).
Change-Id: Ic8c58556fa0cf8f981d386b13ea34b4431b127c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
never use $$system() directly, but instead use qtRunLoggedCommand() with
a newly introduced out parameter. that way we can print the command's
raw output, which should help debugging configure problems.
additionally, we now consistently check the exit code of all executed
commands, which should avoid confusing followup errors.
note that as a side effect some calls now use $$system()'s 'lines' mode
instead of the bizarre default splitting mode. this has no impact on any
of the cases, which is why it is basically a negligible style change at
this point.
however, qtLog() gained support for arguments with more than one element
to accommodate this.
Change-Id: I40d907e27de32dfec8d6086ce7d93fc4be18241f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is clearer, and avoids potential false hits if the target OS
is changed without cleaning the build dir first.
Change-Id: If88f3c555740dc9ff559c172b4b005ed8bfb60ae
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
standardize on the fields in the json structure being single strings in
which separate elements are quoted and space-joined (because quoting
is unlikely to be necessary in the json file itself, and this format
avoids the visual noise of array handling).
the quoting itself is expected to be qmake-compatible, which is assumed
to be the case for the output of pkg-config (it's actually shell-quoted,
but that's the same except in some not-so-relevant corner cases).
Change-Id: Icc1d7abc02c449fa759d9714bc5e56e2b8809585
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Now that -l and -fw options are gone, using a combined EXTRA_LIBS
makes no sense anymore and only complicates things.
Change-Id: Ic12bf482f3bed041aff7f0891f008b1f34ae2b4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These arguments were nonsensical, as they would lead to every single Qt
module linking to those libraries. This was probably some left-over from
old times, when Qt was just a single library.
Change-Id: I0343a6df270fd0d2efa5333ba4e457670f5d0910
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not a feature that should get propagated to other
configure runs, so simply hardcode support for it.
Change-Id: Ieb1c33243154b3583e91061d3592d7e87c36f402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
But without a version number for now.
Change-Id: I0a976ba463cff6812faf85de03a6ad003ea582f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
