It's not used in tools at all and fits a lot better in global.
Also fix the qsimd_x86* files to have a proper copyright
header.
Change-Id: Id3d8e7cfcd7769a1ca9f3d8cf6d357a31a99ba40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Those methods don't modify the CBOR value, they should be const.
Change-Id: I213984ed82e43429413344999a22ad1c4c3beac8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch silences the exception about missing v1 api entry for the
qt_add_3rdparty_library() function.
Change-Id: I74a473ed1c063b13f0a9ca64dcb568b8f8b27235
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Oh, and re-remove the spdy protocol handler.
Change-Id: I9ca3517b14ac202eac19ae75d481cfd78d431abb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With very complex regular expressions this makes a significant
difference in performance.
Change-Id: I5267bf71cae98dffb58ec7a1fc982dae639ff312
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
hash.erase(hash.constFind()) is bound to crash if the hash doesn't
contain the item we're looking for.
Change-Id: Icbefca87b0258970373ec55d5dc113e6ab39c5f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For INSTALL_*DIR variables that have the the same value as
CMAKE_INSTALL_PREFIX, a second cmake run cleared the value. This is
because file(RELATIVE_PATH) returns the empty string if we pass the same
absolute paths.
Fix this by checking the return value of file(RELATIVE_PATH) for the
empty string and setting it to ".".
It's a limitation of qmake that empty strings are not handled as ".".
Change-Id: I8fc4d1eabcc9d5634be2f3741b0002a347dd17e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Without this patch JPEG support is always disabled, even though we can
build it from 3rdparty sources.
Change-Id: I9e619f0ca8ec3ca3e7c58981bb6af9b33426a029
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
PCH files were only used while building qtbase. Make sure the value
is exported to the BuildInternalsConfig file, so the value is re-used
when building other repositories.
Also disable PCH when building simulator_and_device iOS builds, because
CMake doesn't currently generate separate PCH files per architecture.
Change-Id: I79955ebc557b800bc3c704deac519fe80012c229
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
mappedObject() can do exactly the same thing, there's no need for a
mappedWidget() signal as well
This removes a reverse dependency between Qt Widgets and Qt Core where
QWidget pointers are being used inside Qt Core.
[ChangeLog][QtCore] Removed QSignalMapper::mappedWidget. Connect to
mappedObject instead, and use qobject_cast<QWidget *> to handle Widgets.
Change-Id: I60618a34dd94575e993bd6d8a2cead95cfd71d55
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As a drive-by, enable testing of rcc in the cmake build.
Change-Id: I4150ff3ffe7404bab0cbc72f80b23b47a60cf33d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
qt5_use_modules has been deprecated in 2013 (commit d9ea4bb144)
and removed for the first time in 2018, but then brought back - see
discussion in https://lists.qt-project.org/pipermail/development/2018-June/032837.html .
Anyhow, I think we can finally put it to a rest in Qt 6.
Change-Id: I770f7e93406ad68535d1d90e4a3bacfb920e2d5a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The use of a single subdirectory only for the test binary, but not the
actual source file, just made things harder to discover when looking
for the test code. Now all subdirectories are actual sub-tests.
Change-Id: Ia3e308ba8d231cc8ead1491b10a34801f76669b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add some overloads where (I thought) it makes sense for QDir and QFile
to accept std::filesystem::path objects. Currently my thinking is to
not add overloads for static functions where std::filesystem can already
do the same job, e.g. create directory or file.
Template and enable_if is needed due to both QString and
std::filesystem::path being able to be constructed from string literals.
The common shared code is currently in QFile because QDir had an
implicit include of QFile, made explicit in this patch, and QFileInfo
has an include to QFile as well.
The QT_HAS_STD_FILESYSTEM macro is visible in user-code which I
currently take advantage of in the tests, and users could too.
Change-Id: I8d05d3c34c6c17e20972a6a2053862b8891d6c3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While investigating QTBUG-80554, it was discovered that a small
mismatch in how heights are calculated in QTextDocument and
QPainter will cause the tst_QLabel::sizeHint() autotest to
fail if ceil(ascent+descent+leading) is higher than
ceil(ascent+descent). This is currently blocking the fix for
QTBUG-80554, because this exposes the bug by detecting the
correct leading for a font where we previously ignored it.
Task-number: QTBUG-82954
Change-Id: I99323c8e1a0fa281aa8d754ba71432468fcb2d4c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
once CoreText shaper in Harfbuzz has been disabled, we do not need
the hack-ish enablers to support it
Follows-up 21c242f9fd
Change-Id: I40d598b2c9b57ca7953716a56e4e119b2fc06a9b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this code isn't used as of 21c242f9fd
and thus we do not need to keep the patch around
Change-Id: Ic3b836c6a68f40b8e450542a39db968ef3b09101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The support for handling color spaces by names is deprecated in
recent AppKit versions, and should be replaced by using
NSColor.type, and operations on the type-specific properties of
the color.
Merge the two implementations from qcoregraphics.mm and
qcocoacolordialoghelper.mm, which also fixes the inconsistent
interpretation of color components as device dependent (in
qcoregraphics) or generic (in qcocoacolordialoghelper). We now
always populate the QColor with device independent components.
Change-Id: Id79c609736ff1962bebe4bd7158781a6d1b4475e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QFuture<void> and QFutureWatcher<void> are specialized to not contain
any of result fetching methods, but otherwise they share almost the same
implementation with QFuture<T> and QFutureWatcher<T> respectively.
This change unifies their implementations to get rid of unnecessary code
duplication.
Change-Id: I9494ddc58c6db192c66edb988105927da6d61a3b
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
When creating a new QColorSpacePrivate it must be reffed otherwise in
the destructor the deref() will bring the count to -1 which is true
and will not delete the d_ptr.
Change-Id: Id569bae22134b56bf6ad37158d7079b495599fd7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We can ignore the tests for those features and directly ask CMake
whether the compiler supports the respective language version.
Change-Id: I31cd35493443fea0c6d0b0a5e641768c3bcbe736
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Repos like qtshadertools need it when configuring their own
bundled libraries.
Amends 572c03eb7a
Change-Id: I540e99d5bd2938299a10220a1a5e0d97091077b3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qt_add_module checks for the existence of the following directory
include/QtFoo/6.0.0/Foo when deciding whether a private module target
should contain that path in its INTERFACE_INCLUDE_DIRECTORIES.
There are 2 cases when it's created, when running syncqt, and inside
qt_install_injections. If syncqt doesn't create it because there are no
private headers (like in qttools/src/global), qt_install_injections
created it at generation time (for injected configure headers like
qttools-config_p.h)
Unfortunately that caused the existence check mentioned above to fail,
not exporting the path in the QtToolsPrivate's include directories,
and failing the qttools build.
To fix that, create the injection files (and directories) at configure
time, using qt_configure_file instead of file(GENERATE).
Change-Id: Idd9b6ec36e986c4de95d11557170e1c70927211c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has the same kind of signature as file(GENERATE) but
creates the files at configure time rather than generation time.
CMake provides a few ways to generate files
file(WRITE) -> always overrides content
configure_file() -> only overrides if content changes, creates file
at configure time, can only take a file as input
file(GENERATE) -> only overrides if content changes, creats file
at generation time, can take a string or file
as input
Because dealing with an input file is a hassle (need to create one,
make sure it's installed, make sure it's used correctly in the
various build types like super-build, non-prefix-build, etc)
people tend to use file(GENERATE) instead, which can take a string
argument, and is thus easier to use.
Unfortunately that introduces subtle bugs because the
file is created at generation time, but there are existence
checks which are done at configuration time.
Thus qt_configure_file allows creation of files at configure time,
without having to provide an input file. Underneath it uses
configure_file(). Once CMake 3.18 is released, the implementation
can be switched to use file(CONFIGURE).
Change-Id: Ic8f8d88541ef0b25d01af143352c8c9ba390ad5f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When building qtdeclarative in a non-prefix configuration,
metatypes.json files were created in the source dir. This happened
because the default arg_INSTALL_DIR value is relative in
qt6_generate_meta_types_json_file, and thus a file(TOUCH) with a
relative path creats it in the source dir.
The fix is to check if it's relative during a non-prefix build,
and make it absolute (relative to the install prefix, which is the
qtbase build dir).
Change-Id: Ie9abbd5d93a64e79184d77655d8d8399e894fde5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before this patch there were a few ways to build tests
- Configure all tests as part of the repo build
- Configure all tests as part of the repo build, but don't build
tests by default (-DQT_NO_MAKE_TESTS=ON)
- Configure all tests as a standalone project in a separate build
dir using -QT_BUILD_STANDALONE_TESTS=ON
All of the above incur some time overhead due to the necessity
of configuring all tests.
Sometimes you just want to build ONE test (or a few).
To facilitate that use case, a new shell script called
bin/qt-cmake-standalone-test(.bat) can now be used to configure
and build one or more tests.
The script takes one single argument pointing to the desired test
project path and configures a generic template project that sets up
all the necessary Qt CMake private API, afterwards calling
add_subdirectory on the passed in project.
Example
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon
or
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image
After that, simply run 'ninja && ctest' to build and run the test(s).
This is the CMake equivalent of calling qmake on a test .pro file
(or on a tests SUBDIRS .pro file)
There are 3 details worth mentioning.
Due to the add_subdirectory call, the built artifacts will not
be in the top-level build dir, but rather in a nested build_dir.
The script currently can't handle more than one argument
(the path to the project), so you can't pass additional
-DFoo=bar arguments.
If a test uses a 3rd party library (like Threads::Threads)
which was not a public dependency for any of the Qt modules,
configuration will fail saying that the target was not found.
Perhaps we should consider recording these packages when
generating the StandaloneConfig.cmake files.
Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qsql_odbc.cpp(1589): warning C4267: 'argument': conversion from 'size_t'
to 'int', possible loss of data
Change-Id: Ib36fda3e3b21bdbc8b343ae5136542dfcf3c1065
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
qstring.cpp(10210): warning C4267: 'argument': conversion from 'size_t'
to 'uint', possible loss of data
qcontiguouscache.h(141): warning C4003: not enough arguments for
function-like macro invocation 'max'
Change-Id: I01f1fc1c85341ea61c86dcffb1b01fe4cde50eea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The class remains \internal though, as it has a very narrow use-case for
low-level code inside Qt.
Change-Id: I9d2b6486ce29b290af7f930a0bfc78590a83cc01
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This replaces the private tagged pointer and the use of enums for the
tag makes the observer handling code more readable. The
pointer-to-tagged-pointer class remains in qpropertyprivate.h due to its
exoticness.
Change-Id: Icc88799136c6839426d994b42368526463265e66
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When a binding is backed by old-style property captures, then having
this API is needed for Qml.
Change-Id: Icf51efe057eaf845969ed2cda52d082dedde677e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A generic binding allows implementing the binding function in a way that
enables the QML engine to run binding scripts and convert the V4::Value
into a QVariant and then assign the value to the property with the help
of QMetaType::construct.
Change-Id: Id4807be92eee7e3501908e6c5e4c861cfcb7772a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Do not process selfcover.pri in the conversion as the output requires a
lot of special case fixs ups.
Change-Id: Iebee484db887973369b5604344a6d486f4bea20b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously you could use either module-specific or
repo-specific 'docs' targets.
For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'.
Now there's a global / top-level target called
'docs', so 'ninja docs' works.
For super builds it will build the documentation of all
configured repositories.
For a single repo build, it's equivalent to calling
'ninja docs_repo_name'.
Also for consistency, add the "docs_Core" target, which was missing
before. So now a 'docs' target exsits for repo names AND targets.
New global target names are
- docs
- prepare_docs
- generate_docs
- html_docs
- qch_docs
- install_html_docs_docs
- install_qch_docs_docs
- install_docs_docs
Amends 0095ff4e06
Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds the equivalent of testlib's selfcover.pri and is enabled
for both testlib and the respective selftests test.
This patch also fixes the selftests so that they can run without
FEATURE_testlib_selfcover enabled.
Change-Id: I15913de2d572ac79804ce3e652cee66de74318f8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
