This enables easier updating of those structs, by reducing the amount of
code that needs to be fixed. The common (and known) use cases are
covered by the two macros being introduced in each case.
Change-Id: I44981ca9b9b034f99238a11797b30bb85471cfb7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two constuctors offering essentially the same functionality.
One taking the QStatic*Data<N> struct, the other what essentially
amounts to a pointer wrapper of that struct. The former was dropped and
the latter untemplatized and kept, as that is the most generic and
widely applicable. The template parameter in the wrapper was not very
useful as it essentially duplicated information that already maintained
in the struct, and there were no consistency checks to ensure they were
in sync.
In this case, using a wrapper is preferred over the use of naked
pointers both as a way to make explicit the transfer of ownership as
well as to avoid unintended conversions. By using the reference count
(even if only by calling deref() in the destructor), QByteArray and
QString must own their Data pointers.
Const qualification was dropped from the member variable in these
wrappers as it causes some compilers to emit warnings on the lack of
constructors, and because it isn't needed there.
To otherwise reduce noise, QStatic*Data<N> gained a member function to
directly access the const_cast'ed naked pointer. This plays nicely with
the above constructor. Its use also allows us to do further changes in
the QStatic*Data structs with fewer changes in remaining code. The
function has an assert on isStatic(), to ensure it is not inadvertently
used with data that requires ref-count operations.
With this change, the need for the private constructor taking a naked
Q*Data pointer is obviated and that was dropped too.
In updating QStringBuilder's QConcatenable specializations I noticed
they were broken (using data, instead of data()), so a test was added to
avoid this happening again in the future.
An unnecessary ref-count increment in QByteArray::clear was also
dropped.
Change-Id: I9b92fbaae726ab9807837e83d0d19812bf7db5ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-23059 only affects 2 test functions, not the whole test. XFAIL the
2 failing tests.
Change-Id: I87086a9ec573362625bc090038dfd7c79aeb9426
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This tests that we get the windowModalityChanged() signal as needed, but
not unnecessarily either.
Change-Id: I2232fa9d45c72e472b324b681859b4b0d574b467
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a qHash overload taking two arguments: the value to
be hashed, and a uint to be used as a seed for the hash function
itself (support the global QHash seed was added in a previous patch).
The seed itself is not used just yet; instead, 0 is passed.
Compatibility with the one-argument qHash(T) implementation is kept
through a catch-all template.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I1d0a84899476d134db455418c8043a349a7e5317
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
tst_rcc and tst_qdom rely on specific QHash orderings inside
rcc and QDom respectively (see QTBUG-25078 and QTBUG-25071).
A workaround is added to make them succeed: QDom checks for
all possible orderings, and rcc initializes the hash seed to 0
if the QT_RCC_TEST environment variable is set.
Change-Id: I5ed6b50602fceba731c797aec8dffc9cc1d6a1ce
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
It is an extension coming from the use case when you, for instance, need to
implement a countdown timer in client codes, and manually maintain a dedicated
variable for counting down with the help of yet another Timer. There might be
other use cases as well. The returned value is meant to be in milliseconds, as
the method documentation says, since it is reasonable, and consistent with the
rest (ie. the interval accessor).
The elapsed time is already being tracked inside the event dispatcher, thus the
effort is only exposing that for all platforms supported according to the
desired timer identifier, and propagating up to the QTimer public API. It is
done by using the QTimerInfoList class in the glib and unix dispatchers, and the
WinTimeInfo struct for the windows dispatcher.
It might be a good idea to to establish a QWinTimerInfo
(qtimerinfo_win{_p.h,cpp}) in the future for resembling the interface for
windows with the glib/unix management so that it would be consistent. That would
mean abstracting out a base class (~interface) for the timer info classes.
Something like that QAbstractTimerInfo.
Test: Build test only on (Arch)Linux, Windows and Mac. I have also run the unit
tests and they passed as well.
Change-Id: Ie37b3aff909313ebc92e511e27d029abb070f110
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The string from the server should begin with "* OK" and end
with "\r\n" according to the IMAP specification.
Still have a check for "server ready" as this does not change between
cyrus versions.
Change-Id: Ia01ed8aa054e5726bba8b411d30edc6205cc8465
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to documentation, SQLite doesn't have a separate Boolean
storage class. Instead, values are stored as integers 0(false) and
1(true). In QSqlQuery::bindValue(), if a boolean value is bound
to a placeholder, it is converted to text true and false. This fix
converts boolean value to integer 0 and 1.
Task-number: QTBUG-23895
Change-Id: I4945971172f0b5e5819446700390033a1a4ce301
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
While QArrayDataPointer offers generic detach() functionality, this is
only useful for operations that may modify data, but don't otherwise
affect the container itself, such as non-const iteration, front() and
back().
For other modifying operations, users of the API typically need to
decide whether a detach is needed based on QArrayData's requirements
(is data mutable? is it currently shared?) and its own (do we have
spare capacity for growth?).
Now that data may be shared, static or otherwise immutable (e.g.,
fromRawData) it no longer suffices to check the ref-count for
isShared().
This commit adds needsDetach() which, from the point-of-view of
QArrayData(Pointer), answers the question: 'Can contained data and
associated metadata be changed?'.
This fixes QArrayDataPointer::setSharable for static data (e.g.,
Q_ARRAY_LITERAL), previously it only catered to shared_null.
SimpleVector is also fixed since it wasn't checking Mutability and it
needs to because it supports fromRawData().
Change-Id: I3c7f9c85c83dfd02333762852fa456208e96d5ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables a truncating resize() to be implemented. It is similar to
destroyAll(), but updates the size() as it goes, so it is safe to use
outside a container's destructor (and doesn't necessarily destroy all
elements).
The appendInitialize test was repurposed and now doubles as an
additional test for QArrayDataOps as well as exercising SimpleVector's
resize().
Change-Id: Iee94a685c9ea436c6af5b1b77486734a38c49ca1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows QArrayData::detachFlags's lead. Given the (known) size for
a detached container, the function helps determine capacity, ensuring
the capacityReserved flag is respected.
This further helps aggregating behaviour on detach in QArrayData itself.
SimpleVector was previously using qMax(capacity(), newSize), but there's
no reason to pin the previous capacity value if reserve() wasn't
requested. It now uses detachCapacity().
Change-Id: Ide2d99ea7ecd2cd98ae4c1aa397b4475d09c8485
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds given number of default-initialized elements at end of array. For
POD types, initialization is reduced to a single memset call. Other
types get default constructed in place.
As part of adding a test for the new functionality the arrayOps test was
extended to verify objects are being constructed and assigned as
desired.
Change-Id: I9fb2afe0d92667e76993313fcd370fe129d72b90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Way back in the mists of time, someone added SO_REUSEPORT to socket binding,
which was great, because otherwise it meant that multiple UDP sockets couldn't
share the same port on OS X (as platforms with SO_REUSEPORT apparently don't
support rebinding with SO_REUSEADDR).
However: SO_REUSEPORT also means that *any* bind on a port will succeed, which
is most definitely not wanted in the case of TCP sockets, so check the socket
type before performing the actual bind.
Also test that multiple listens don't take effect.
Change-Id: I2f8d450bcfb8a7f3abd8918a4e789a850281dd13
Done-with: Thiago Macieira
Done-with: Shane Kearns
Task-number: QTBUG-6305
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On OS X and Windows, this was not working, because the socket was being bound
in v6 mode (due to ::Any being for dual mode), but the address passed was a v4
address, meaning it took the wrong codepath. Linux, strangely, apparently works
anyway.
This is fixable in OS X (by using the v6 join path when bound in v6/dual mode),
but the same fix doesn't work on Windows, failing with WSAEADDRNOTAVAIL.
Don't allow this behaviour, and provide a sane error message telling the user
what to do instead.
Done-with: Shane Kearns
Task-number: QTBUG-25047
Change-Id: Iaf5bbee82e13ac92e11b60c558f5af9ce26f474b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QPlatformInputContext now gets notified on changed focus and
has inputMethodAccepted() telling whether current focus object
accepts input method events.
Also adapted IBus plugin to use this. Key event filtering for
focused objects without input method support got fixed by the
change.
Change-Id: I6910aa6af2459d752a5763f0ae88fa8c34e5b165
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Unit test to override mask delay value so running it is not dependent
on platform style hint.
Change-Id: Ic5cc12d32cf97e64729b3af54250bdc05c0c95ad
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
When FTP login fails we fail to remove the entry from the cache.
This is because the cache key is created from the url with the
userInfo. So this needs to be set again to match the key used
when inserted.
Task-number: QTBUG-11824
Change-Id: Ib3fd2d737581653ae59c56d0810d42e2d8dc2176
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Do not append blank character if it is the default.
Task-number: QTBUG-20834
Change-Id: I17f6ac4058f295f25ff49f33c41bd9ee40b75811
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Callers should just call the standard allocation functions directly.
Adding an extra function call onto all basic memory management for the sake of
making it instrumentable in rare cases isn't really fair to everyone else.
What's more, this wasn't completely reliable, as not everything was using them
in a number of places. Memory management can still be overridden using tricks
like LD_PRELOAD if needed.
Their aligned equivilents cannot be deprecated, as no standard equivilents
exist, although investigation into posix_memalign(3) is a possibility
for the future.
Change-Id: Ic5f74b14be33f8bc188fe7236c55e15c36a23fc7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Postgres async notifications can contain a payload parameter
that is currently discarded. This patch provides the QSqlDriver
api change necessary to deliver a payload with each emitted
notification by adding a QVariant parameter to the notification
signal. It also provides the implementation for the qsqlpsql driver.
The qsql_ibase driver has been updated to reflect the change to the
notification signal signature.
The eventNotificationPSQL test in the qsqldatabase test has
been expanded to test proper payload sending and receiving.
All tests/auto/sql/kernel tests have been run with sqllite and
postgres with no regressions.
Task-number: QTBUG-13500
Change-Id: I9137f6acc8cfca93f45791ca930e0287d93d5d0d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Tests added that cover boundValues with positional binding,
and boundValueName.
Change-Id: I2962d76607b716d19d3e0be958109be2f032f2d9
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This patch fixes a critical bug in the qsqlpsql driver where
notifications aren't delivered when received. Any blocking libpq
function(specifically PQexec) will read all the incoming data
from the socket, including any pending notifications. This would
cause the socket notifier to never be fired for incoming
notifications that are already queued inside libpq. The qsqldriver
test case was skipping the postgres notification test because of
this bug, now its enabled and passing. In order to fix this
bug I made a wrapper function for PQexec in QPSQLDriverPrivate
that calls _q_handleNotification via QMetaObject::callMethod
QueuedConnection in order to deliver pending notifications
when control returns to the event loop. I also added a flag
to ensure only one call is made each time the event loop is
entered.
Change-Id: I19f5297094ae7ae46bfb0717e4fca744d69f7b92
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
QSqlTableModel::headerData() generates a crash if an invalid filter
is set. QSqlQueryModel::indexInQuery() should check the index value
before applied to d->colOffsets[].
QSqlQueryModel::initRecordAndPrimaryIndex() is updated to sync the
size of rec and colOffsets.
Task-number: QTBUG-23879
Change-Id: Ic9f88bb288592aa6fb3c1415cc818632dadaab56
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
For data allocated and maintained by QByteArray, there's a guarantee
that data() is null-terminated. This holds true even for null and empty,
where logically the terminating character should never be dereferenced.
For tests that modify or generate QByteArrays, this ensures the
invariant is kept.
In the toFromHex() text, const-ness of temporary variables was dropped
to enable the test macro to be used, as the qualification didn't add
much to the test otherwise.
Change-Id: I7ee52e79e3a9df7de18c743f3698dab688e6bf0e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Prepared queries should be able to use a name parameter more than
once. Currently this will result in undefined behavior and crashes.
This patch fixes the bug and implements the needed test case.
Task-number: QTBUG-6420
Change-Id: I07d6537e432a9b2781e9ef3d9f597bceb054527e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
There are probably lots of places that rely on that behaviour, so go
back to what it was.
Change-Id: I4d1503a0ee105a50cdfaab52d9a5862a02c70757
Reviewed-by: David Faure <faure@kde.org>
I don't know if the bug is in moc or in qmake. But it bails out trying
to parse the .cpp file after the
tst_QUrlInternal::nameprep_testsuite_data function. If the #include is
placed above, it works. If it's placed below, it doesn't.
Change-Id: Ide554aa5aa3f1999e29604ba6d25ccdb09f6ef28
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Don't crash when either side is null but not both sides.
Also make sure operator< is working properly and satisfies the basic
conditions of a type (such as that if A < B, then !(B < A)).
Change-Id: Idd9e9fc593e1a7781d9f4f2b13a1024b643926fd
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The strict mode check is now implemented after the tolerant parser has
finished, and only if the tolerant parser has not found any errors. We
catch the use of disallowed characters (control characters plus a few
not permitted anywhere) and broken percent encodings.
We do not catch the use of Unicode characters, as they are permitted
in IRIs.
In the tests, remove the old errorString test since it makes little
sense.
Change-Id: I8261a2ccad031ad68fc6377a206e59c9db89fb38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Note that QUrl can only remember one error. If the URL contains more
than one error condition, only the latest (in whichever parsing order
URL decides to use) will be reported.
I don't want too keep too much data in QUrlPrivate for validation, so
let's use 4 bytes only.
Change-Id: I2afbf80734d3633f41f779984ab76b3a5ba293a2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Also say hello to QUrl's constructor and QUrl::toString being allowed
again.
QUrl operates now on UTF-16 encoded data, where a Unicode character
matches its UTF-8 percent-encoded form (as per RFC 3987). The data may
exist in different levels of encoding, but it is always in encoded
form (a percent is always "%25"). For that reason, the previously
dangerous methods are no longer dangerous.
The QUrl parser is much more lenient now. Instead of blindly following
the grammar from RFC 3986, we try to use common-sense. Hopefully, this
will also mean the code is faster. It also operates on QStrings and,
for the common case, will not perform any memory allocations it
doesn't keep (i.e., it allocates only for the data that is stored in
QUrlPrivate).
The Null/Empty behaviour that fragments and queries had in Qt4 are now
extended to the scheme, username, password and host parts. This means
QUrl can remember the difference between "http://@example.com" and
"http://example.com".
Missing from this commit:
- more unit tests, for the new functionality
- the implementation of the StrictMode parser
- errorString() support
- normalisation
Change-Id: I6d340b19c1a11b98a48145152513ffec58fb3fe3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Now that QUrlQuery exists, these methods are no longer necessary in
QUrl itself. Manipulation of the items should be done using the new
class.
They are now implemented using a temporary QUrlQuery. This is hardly
efficient but it works.
Change-Id: I34820b3101424593d0715841a2057ac3f74d74f0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This class is meant to replace the QUrl functionality that handled
key-value pairs in the query part of an URL. We therefore split the
URL parsing code from the code dealing with the pairs: QUrl now only
needs to deal with one encoded string, without knowing what it is.
Since it doesn't know how to decode the query, QUrl also becomes
limited in what it can decode. Following the letter of the RFC,
queries will not encode "gen-delims" nor "sub-delims" nor the plus
sign (+), thus allowing the most common delimiters options to remain
unchanged.
QUrlQuery has some undefined behaviour when it comes to empty query
keys. It may drop them or keep them; it may merge them, etc.
Change-Id: Ia61096fe5060b486196ffb8532e7494eff58fec1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change it to operate on QChar pointers, which gains a little in
performance. This also avoids unnecessary detaching in the QString
source.
In addition, make the output be appended to an existing QString. This
will be useful later when we're reconstructing a URL from its
components.
Change-Id: I7e2f64028277637bd329af5f98001ace253a50c7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The reason for this change is that the strict parser made little sense
to exist. What would the recoder do if it was passed an invalid
string?
I believe that the tolerant recoder is more efficient than the
correcting code followed by the strict recoder. This makes the recoder
more complex and probably a little less efficient, but it's better in
the common case (tolerant that doesn't need fixes) and in the worst
case (needs fixes).
Change-Id: I68a0c9fda6765de05914cbd6ba7d3cea560a7cd6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This one function is an all-in-one:
- UTF-8 encoder
- UTF-8 decoder
- percent encoder
- percent decoder
The next step is add the ability to modify the behaviour, by telling
the function what else it must encode or decode and what it should
leave untouched.
Change-Id: I997eccfd2f9ad8487305670b18d6c806f4cf6717
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These functions are now aliases to {to,from}Ace, which are usually
what you want. The original functions from Qt 4.0 had the wrong
semantics and wrong name. The new ones from Qt 4.2 execute the ACE
processing from IDNA (specifically, the ToASCII and ToUnicode
operations described in the RFC).
But so as not to be without tests, export the tests in unit testing
environment and test the punycode roundtrip. Note that the
tst_QUrl::idna_test_suite test tests *only* the Punycode roundtrip,
not the nameprepping.
Change-Id: I9b95b4bd07b4425344a5c6ef5cce7cfcb9846d3e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Copy the unit tests that related to percent-encoding to
tst_qbytearray.cpp and use public functions to execute
QUrl::fromPercentEncoded and QUrl::toPercentEncoded.
Change-Id: I6639ea566d82dabeb91280177a854e89e18f6f8d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
The clone() method didn't detach if we had enough memory
allocated, but didn't consider that the object being
modified is not the root object of the binary blob.
Change-Id: I9a479ae1c873b7fe9cff7e13c539e7a41961bf68
Reviewed-by: Cristiano di Flora <cristiano.di-flora@nokia.com>
Reviewed-by: abcd <amos.choy@nokia.com>
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
The change in plugin loading has meant that different plugins in the
same plugin folder will not be handled properly when loaded with
different instances of QFactoryLoader.
A solution is to only unload compatability plugins from
QFactoryLoader::update() since they are the only plugins that are
actually loaded in that method.
This auto test shows the error on the current version of QFactoryLoader
and passes with the fix described above.
Change-Id: I12001525d51bb631d6742c5965357598322f247c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The new code now generates lowercase hex instead of uppercase, so
adapt the unit tests to pass.
Also, "123.0.0" is now considered valid (compatibility with inet_aton).
Change-Id: I07b5125abf60106dc5e706033d60836fb690a41f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Similarly, only test against the libc function on Linux, as other OS
sometimes have different behaviour.
Change-Id: I9b8ef9a3d660a59882396d695202865ca307e528
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
In the unit test, check against inet_aton on Linux with GLIBC
only. Other platforms have this function too, but they sometimes have
different behaviour, so don't try to test them equally.
Change-Id: I1a77e405ac7e713d4cf1cee03ea5ce17fb47feef
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
WA_PaintOutsidePaintEvent is only suggested to be used when porting Qt3 code
to Qt 4 under X11 platform. and it has been broken now.
Change-Id: Ie4297b2a449f1055ca10ada9efb930e6018b1efb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QStandardPaths now knows a "test mode" which changes writable locations
to point to test directories, in order to prevent auto tests from reading from
or writing to the current user's configuration.
This affects the locations into which test programs might write files:
GenericDataLocation, DataLocation, ConfigLocation,
GenericCacheLocation, CacheLocation.
Other locations are not affected.
Change-Id: I29606c2e74714360edd871a8c387a5c1ef7d1f54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This adds checks to ensure Q_ALIGNOF is returning the desired alignment
for explicitly-aligned types.
The alignment check is now inlined in the test inside QCOMPARE so we get
slightly more informative errors:
FAIL! : tst_Collections::alignment() Compared values are not the same
Actual (quintptr(&it.value()) % Value::PreferredAlignment): 64
Expected (quintptr(0)): 0
Loc: [tst_collections.cpp(3384)]
In this case, this is enough to notice "non-native" alignments are being
requested. Having test parameters otherwise hidden in template arguments
doesn't help the situation.
Change-Id: I05267fd25b71f183cfb98fb5b0a7dfd6c28da816
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The intent is to force instantiation of template container classes and
semantics or behaviour are otherwise irrelevant in this context.
tst_collections.cpp:3036:15: warning: inequality comparison result unused
tst_collections.cpp:3037:15: warning: equality comparison result unused
tst_collections.cpp:3100:15: warning: inequality comparison result unused
tst_collections.cpp:3101:15: warning: equality comparison result unused
Change-Id: I70ad38b18dcbc43879e36a34b1da460aee5f7b07
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Instead use QMap if we want a stable order.
Task-number: QTBUG-24995
Change-Id: I93f643df236f5078768f539615fa47163e5262e8
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They predate Qt 4.5, but it looks like the comments are indicating
that QVariantList and QVariantMap types will use the basic template,
but that is not the case. Instead they will use the compare
specializations for QList<T> and QMap<T> respectively.
Change-Id: Iebf7e9b8aaa8a699ea720090fbf641dfecde0ff7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test that they do expand properly and don't produce errors. This is
templated code, so it doesn't get tested fully unless we instantiate
them.
Also check that the alignments are correct.
Change-Id: I2a8ee2165167f54b652b4227411e209850974b8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QComboBox does in fact have a user property
since b1b87a73012342dc1619a8e907ea9954d59ca564.
Change-Id: I24eb2ef267cec5d8a9f7348954b703fa6df04fa5
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: David Faure <faure@kde.org>
Both classes had such components before, but there were issues with
the NOTIFY signal not being in the same class as the Q_PROPERTY.
This patch solves that problem by using a signal of a different name.
Task-number: QTBUG-15731
Change-Id: Ibc7ce4dba8a6b88c05d62a90e14d0101c5cd3082
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This makes it more useful in all the Qt apps that don't set it,
given that it's used internally by QTemporaryFile, QTemporaryDir,
QStandardPaths, QDBus, QAccessibleApplication, etc.
Qt4 compatibility in the deprecated QDesktopServices is preserved,
no fallback there.
Change-Id: I584463507cf917a3720793c6bd45d07c60f8356c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There isn't really a need for the dependency as LanguageChange events can be
caught in QObject::eventFilter, directly.
Change-Id: I39778fbe1663924d97705b514ae399cfd3749776
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Previously the method didn't take into account that hitTest()
returns visual index, i.e. containing the preedit, and thus was easily
hitting assertion. Need to compensate for that before checking for actual
link.
Change-Id: I119e7f91088b4db9d347a3da338f6df915ce9719
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Feature to be reimplemented simplified. Cases when input method
needs to be reset with possibility to commit use
QInputMethod::commit() again.
Change-Id: Ibfe7aecc0799e7a76c7ac4f5d860971cfe6e97ca
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Commit 5e9089135b had some problems:
* It left out the cast to IServiceProvider in the refactoring of
QueryInterface. This broke IAccessible2.
* It also failed to enable the codepath for MinGW inside wrap(), which
effectively caused MSAA for MinGW to be disabled.
It also adds an autotest to the bridge (finally). It is simple,
but it should help avoiding committing stuff that completely breaks
the bridge.
Change-Id: I459d89c3bdb93e54ddea85872b50fc1dba0fe4a0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The code in question was already commented out before the test was added
to the Qt repository in 2006. After changing the code to use
QFile::rename() for portability, the test appears to pass.
Change-Id: I52a8578a47da419cabf5826b633cc4f2ac2c5218
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest gives different results on consecutive runs, and is
therefore insignificant for the purpose of detecting regressions.
Task-number: QTBUG-24977
Change-Id: I5c4dfd663ce5df6b60ae47a29d332c06e3c0585f
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Calling raise() on a hidden window should not show it. The setVisible()
function will ensure that the window is raised (since we use orderFront
or makeKeyAndOrderFront). This fixes the failing
tst_QDockWidget::task169808_setFloating() test as well.
Task-number: QTBUG-24774
Change-Id: If34472ebbcd615c10654efafd54c84c03d10bc8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
THe UK still uses the Imperial system at least for distances
and many other things.
Change-Id: I99379de35620114328ad6a7fc9b226a46692bedd
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Replaced hard coding as QT_GUI_PASSWORD_ECHO_DELAY with
a style hint.
Change-Id: I0b78ebad723dbe19d9b9496583203e31545874e2
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Apparently there are still issues here and there (e.g. in declarative)
with properly recognizing more complex event sequences (like triple
clicks). The behavior of qtbase is correct but we need a test case
that makes sure the functionality will not regress.
Change-Id: I08c558fcfdde0dd06e194b4f0affc6f6896573bf
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Make sure that the keybaord modifiers are maintained properly when
handling window system events.
Change-Id: Ie75cbe5eb509c29e3d2291694f2de509fbf3098a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The QFlags::operator int() isn't being called, so GCC complains that
this isn't an integer expression.
Change-Id: I537d06fd4a52ecbcddf0ef67807b298c42d3e911
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Lack of support for these types is not a real issue as endian
conversions on byte-sized types are no-ops. Still, the conversions are
useful as they facilitate writing of generic code. They can also be used
explicitly as a way to document in code an endian-specific binary
format:
uchar *data;
quint8 tag = qFromLittleEndian<quint8>(data++);
quint32 size = qFromLittleEndian<quint32>(data);
This commit also adds a test for functions documented in the QtEndian
header.
Change-Id: I2f6c876ce89d2adb8c03a1c8a25921d225bf6f92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"/data/" was appended to the base directory.
Change-Id: I220f2ce74c36b795bc49c7c84106feb0709d1547
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we want to have any chance of getting the missing printers
reported, we cannot check the size beforehand.
Change-Id: I450897fe53c04aeb1a4b217bd0c1f548c455a428
Reviewed-by: John Layt <jlayt@kde.org>
Both QWindow and QWidgetWindow should update with the
active state signal.
Change-Id: I0219f803aa0fb109765f0faa0aedb120c2a439f0
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Added a new accessible interface for QGroupBox, as QAccessibleDisplay
is not good enough when the QGroupBox is checkable.
AccessibleFactory was modified to return a QAccessibleGroupBox when
the accessible interface of a QGroupBox is requested.
Created tst_QAccessibility::groupBoxTest
Port to Qt5 of the patch by José Millán Soto <fid@gpul.org>
Change-Id: I6c23dcf5562b3ea269b04102e78463b65827188a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
(cherry picked from commit c03ceb203c65d9e3485fad848bfc0c4b6ee3e9aa)
The bridge can do the mapping to and from screen position.
This is now done in the windows bridge.
Change-Id: I5ca5df0fbeeb58202539f55a0f62717fb1685092
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
For all practical purposes, the fallback introduced here returns the
desired value. Having a fallback enables unconditional use of Q_ALIGNOF.
For compilers that provide native support for it, Q_ALIGNOF is otherwise
#defined in qcompilerdetection.h.
Change-Id: Ie148ca8936cbbf8b80fe87771a14797c39a9d30c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Internally we construct QByteArrays from QStaticByteArrays. For example
moc is generating QStaticByteArray structure for every string it saves.
New test cases check if a QByteArray constructed from a QStaticByteArray
behaves as a not statically constructed one.
Change-Id: Ia4aa9a1a5bc0209507636c683a782dda00eae85c
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QWorkspace had been called Q3Workspace before Qt4.0 finally released.
In a sense, it is a Qt3 support Widget. And QWorkspace has been
deprecated and replaced by QMdiArea at Qt4.3.
Change-Id: Iea1bf831c9960c23c2b21d51fdc7c13b303642ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Use QEXPECT_FAIL instead (QRegExp is bugged w.r.t. the specific
test data).
Task-number: QTBUG-22466
Change-Id: Id5af01fa0d5c0536845fd4db19d4264498a8675b
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This allows me to keep the UTF-8 invalid data in one safe place. I
won't need to copy & paste it.
Change-Id: Icb909d08b7f8d0e1ffbc28e01a0ba0c1fa9dccf0
Reviewed-by: David Faure <faure@kde.org>
QSharedPointer is about to become final.
Instead of inheriting from it to add implicit
conversions to and from QSslSocket*, make
QSslSocketPtr a typedef, and make the
conversions explicit.
Change-Id: I4eebb262ab5aef348f4d676f9e839325d4ed13da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSharedPointer is about to be made final. Instead
of inheriting from it to gain access to the
d-pointer, cast it to a layout-compatible struct
and access the pointer from there.
Assert liberally to ensure layout compatibility.
Change-Id: Ifc0fa6a6608e861469286673844325663f4f7fcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSharedPointer isn't meant to be used as a
base class.
Instead of inheriting from it to add implicit
conversions to and from QNetworkReply*, make
QNetworkReplyPtr a typedef, overload two
oft-used functions to take a QNetworkReplyPtr
in addition to QNetworkReply*, and otherwise
make the conversions explicit.
Change-Id: I1eff1793a19f2d5bad1cce8de74c0786675a50f3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QMap used to use a skiplist in Qt 4.x, which has variable
sized nodes and we can thus not optimise using custom
allocators.
The rewrite now uses a red-black tree, and all allocations
and tree operations happen in the cpp file. This will allow
us to introduce custom allocation schemes in later versions
of Qt.
Added some more tests and a benchmark. Memory consumption
of the new QMap implementation is pretty much the same as before.
Performance of insertion and lookup has increased by 10-30%. iteration
is slower, but still extremely fast and should not matter compared
to the work usually done when iterating.
Change-Id: I8796c0e4b207d01111e2ead7ae55afb464dd88f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Was not emitted when removed by input method event.
Change-Id: Ia2c0dcb09d42826188d4612f4c1705a41874a31d
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Fixed Q_WS_WIN flagging to Q_OS_WIN in QPrinter API and related
implementation to make API match the documentation and Qt 4.8.
Also Removed the unused internal HDC related functions from the API,
that were previously behind Q_WS_WIN flag.
Some of the properties tested are documented to be valid for native
print engine only in X11 environment, so skipped testing those in
non-xcb environments.
Copy collation is also apparently not supported in Windows native print
engine, though this seems to be undocumented, so skipped that only in
Windows.
At least one of the test blocks in tst_QPrinter::valuePreservation()
failed due to default printer not getting set properly, so fixed that,
too.
Task-number: QTBUG-24191
Task-number: QTBUG-22927
Change-Id: I44a5e3d647a1279fcc7f1e99de6881f9be330246
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This completes 6c98fd2, for systems where default codec is not UTF8.
Change-Id: I94795785d5d172558c40c06bd3ef4ffaba1624c5
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Manual merge of the original fix 1ef309e9 in the Qt 4.8 repo.
Task-number: QTBUG-20480
Change-Id: Id08500c2dd16965af3942e65cff1f4afa24180b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Deprecate the old API for now as not to break existing usages.
Change-Id: I7abbbbe8a34951282537a9d74cded03743f44df7
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Focus change happen as: FocusAboutToChange event -> focus change
-> FocusOut event -> FocusIn event.
Input method need to have focus when calling commit(). Notification
on focus about to be lost allows QWindow implementations to commit in
time.
Also changes QWidget documentation to match code reality.
Change-Id: I17a8a374a33dd700909f79e370b42348869261a6
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The parser makes the default language en_US, and no mimetype xml says
<comment xml:lang="C">, so use the en_US string for the C locale,
rather than returning an empty string.
Change-Id: Iad7c142e8078abe357773249416e7ce9b3e29a92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ApplicationsLocation and DataLocation were returning only the local path,
rather than system paths + local path.
Change-Id: I653d14e5bbe1e08c5fa1ecd5a6106336d1cd0369
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure that if ShowAlphaChannel option is set then also setShowsAlpha
needs to be set for the panel before setting the current color, otherwise
alpha channel value is omitted.
Task-number: QTBUG-24320
Change-Id: Ifb3822711af8ffd0cf6cb4c8aab2b0020d296663
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
We are running out of type ids for built-in types, 255 is not enough.
QMetaType already contains about ~70 types, situation is maybe not
tragic now, but there is a great chance that we will want to add more
built-in types from different modules like jsondb or declarative. Then
it might be tight, because we are not allowed to reorganize type ids
(it would be a binary incompatible change).
This change was not possible up to now. Old moc generated code assumes
that type id can be safely stored in 8 bits.
This is source compatible change.
Change-Id: Iec600adf6b6196a9f3f06ca6d865911084390cc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Since change 2e4d8f67a8 the need for Map and Unmap events has
gone away, as now the Expose event is used to notify the application
about when it can start rendering.
The Map and Unmap events weren't really used except by QWidget to set
the WA_Mapped flag, which we now set based on the expose / unexpose.
Also guarantee that a Resize event is always sent before the first
Expose, by re-introducing an asynchronous expose event handler. Since
an expose is required before rendering to a QWindow, show a warning if
QOpenGLContext::swapBuffers() or QBackingStore::flush() if called on a
window that has not received its first expose.
Change-Id: Ia6b609aa275d5b463b5011a96f2fd9bbe52e9bc4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Fixed path was failing to find sub program.
Change-Id: I86f1a6941e244c9bc25ad0441cc7a441607560b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For Qt5 we no longer want to support the older revisions due to the
dual codepaths that must be maintained, and because the format of the
meta-object data is quite different in revision 7.
The dual codepaths have been replaced by asserts that indicate the
revision in which the feature was introduced, and the older-revision
fallbacks have been removed.
It's not possible to build code generated by moc that has
revision <= 6 with Qt5 because the type of the
QMetaObject::stringdata member changed from const char * to const
QByteArrayData *. For the same reason it's not possible to build a
dynamic meta-object generator targeting revision <= 6 with Qt5.
Hence, too old meta-objects will be caught at compile time, and the
code will have to be ported to generate revision 7 (e.g., by running
Qt5's moc on the original class declaration).
Change-Id: I33f05878a2d3ee3de53fc7009f7a367f55c25e36
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaMethod::typeName() is documented to return an empty string if
the return type is void. But after the introduction of
QMetaType::UnknownType (where void was made a distinct type),
returning an empty string causes the idiom
QMetaType::type(method.typeName())
to break; the result will be QMetaType::UnknownType rather than
the expected QMetaType::Void for methods that return void.
New code should use the new function QMetaMethod::returnType()
instead, but it would be good if existing code still did the right
thing.
The consequence of returning "void" instead of an empty string is
that it breaks existing logic that uses the typeName() length to
determine whether a method returns void. But we judge this as the
lesser of the two evils; it's better to have a typeName() function
that is consistent and keeps the QMetaType::type(method.typeName())
idiom working, than to force the typeName() inconsistency for void
only to keep code that does "strlen(method.typeName()) == 0"
working.
The places in Qt that were relying on a zero-length typeName()
(testlib, dbus, declarative) have already been changed to use
returnType().
Also adapt QMetaObjectBuilder, which is internal API.
Change-Id: I70249174029811c5b5d2a08c24b6db33b3723d19
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Since the introduction of QMetaType::UnknownType, void is a proper
meta-type, and the normalized form of "void" should be "void", not
an empty string.
Add more tests to ensure that we do remove "void" in the one case
where it actually should be removed (e.g. "foo(void)").
Change-Id: I72dc2d24da67cf52da00c678f50213cff1b92e25
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This causes all sorts of problems, but is also blocking the introduction of new,
more detailed signals, because the backend never correctly identified the removal.
The object handle appears to be woken up before the directory is actually
deleted, thus causing QFileInfo::exists() to return true, and not doing the
removal dance. This behaviour isn't exactly documented (as far as I was able to
find out), but also seems to happen consistently, and Chromium also contains
a comment noting a similar issue.
Task-number: QTBUG-2331
Change-Id: Icfb6219b78e688852d7863a666a0ffc31bb4d573
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This actually involved tiding up QObject sources a little bit
to clearly separate QString / QRegExp overloads of findChildren.
The corresponding qFindChildren overload for MSVC 6 compatibiltiy
was *not* added.
Change-Id: I84826b3df9275a9bda03608a5b66756890eda6f8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QVariant handlers can not be unregistered. We are not able to guarantee
that such operation is safe and we do not want to.
Change-Id: Id9a12e6a8c750110e4a08eab1de3e07e5c408675
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFont::defaultFamily() should not use any hardcoded font names like
"Helvetica" or "Times" as they might not be present in certain systems,
it should rather use abstract names like "sans-serif", "serif" and
"monospace" then let the platform plugin to decide which font map to
them.
Change-Id: I5aafb103a5238c17b10773711ad504806c6fc3ce
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This patch changes invalid QVariant qDebug stream value from
"QVariant(, QVariant::Invalid)" to "QVariant(Invalid)"
New tests were added.
Change-Id: Ia57d4fc2d775cc9fce28e03eba402c2173845b35
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Make QJsonValue, QJsonObject, QJsonArray and QJsonDocument
first-class meta-types.
This is an enabler for a lightweight integration with QML.
Change-Id: I4725efdd2746cf97fd26d3632a99e8eee849f834
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
We will not be testing BIC of Qt5 against Qt4
Change-Id: I6f0eea3dd60eea1535749240a178a19605c981d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes a situation where we (wrongly) assume that
a section with size 0 is hidden. However a hidden
section should be one that we have called hideSection
(or setSectionHidden) on.
Change-Id: Ic14eded2666022f27434dc55927323a74910549c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The Lancelot raster painting autotest assumed latin1 encoding of the
QPS scripts files, while the script engine would import subscripts
as UTF8. This fix standardizes on UTF8.
Change-Id: I9e7c1ee7b6ffe77ff68edc8423f00dfb9ab3e95b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This makes the api cleaner and generally the child should not be there.
It is only sometimes more convenient not to create a QAccessibleInterface
instance, so the functionallity is kept.
Change-Id: I26018a6d3e0549f4d79856775b4167c5660e229d
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
There are many tests, examples that depends on widgets. This patch
disables some of them if Qt is configured without widgets.
Change-Id: I5460dadca736c54221874adcd518a7021725d90a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This function calls platform specific function
QWindowsPrinterSupport::supportedPaperSizes(), which then called back
to QPrinterInfo::supportedPaperSizes(), causing infinite recursion.
Fixed by providing a proper implementation for querying supported
paper sizes in QWin32PrintEngine - the same implementation was used in
Qt 4.8.
Task-number: QTBUG-24190
Change-Id: I64a2773d83596df19818bf2636f1255943d7851d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Also make the handling of events in the test pointer
based since mac-g++ doesn't seem to like const
references the way they were before.
Change-Id: I7fe39978d4729b8e586be30978b74aa51ca7cfe6
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
These were not covered at all by tst_qmetatype.
Change-Id: Ic957470ac78b2c15fe449efe17e1f178a41c3690
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This involves invoking the Moc classes directly and using the data
structures it provides instead of invoking the moc exectutable and
parsing the generated code.
Change-Id: Ia5c654e8ef58d52d0d3376252c13e13885f80da3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++11 adds cbegin()/cend() functions for the same reason Qt has
constBegin()/constEnd(). This patch adds these functions to the
Qt containers with the same implementation as constBegin()/constEnd().
It also fixes the return types in the documentation of existing
constFind() functions (documentation only).
C++11 only adds cbegin()/cend() (and crbegin()/crend(), which Qt doesn't have).
In particular, it doesn't add cfind(), so I didn't supply these, even though
Qt comes with constFind().
This is a forward-port of https://qt.gitorious.org/qt/qt/merge_requests/1365.
Change-Id: Ida086b64246b24e25254eafbcb06c8e33388502b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Cached font was used regardless of the format, resulting in incorrect
advance in some cases when default format differed from the cached
format.
Task-number: QTBUG-24188
Change-Id: I39e4156bd9ba743afa7e106e934c90227fbf2b8b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Commit 3fe1eed0 changed the QVERIFY in line 1354 to QCOMPARE. This was
done to work around a (not yet understood) compiler issue. That however
was wrong, as char pointers in QCOMPARE are assumed to point to
'\0'-terminated strings and will get dereferenced.
In this case the intent was to compare the actual pointer values, as the
pointers point past the end of the array and should not be dereferenced.
Explicitly casting to (void *) and using QCOMPARE will not only keep the
intent, it will hopefully also provide meaningful output on failures. As
such the fix was applied throughout the test.
Change-Id: Ib0968df492ccc11d7c391bb69037cd7241e55493
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The DNS server can legitimately include NS and A records for
the authoritative name server in addition to the DNS records
that were requested.
These are now ignored when checking the reply (we only check
results that match the query, rather than failing if a result
is for a different host name than the query).
Task-number: QTBUG-24698
Change-Id: I327f31d58cdca50c7df6b32b275d7f28b56405f0
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
For OnFieldChange and OnRowChange, we don't want more than one row in
the cache with uncommitted changes. This could happen if deletion in
the database fails while other changes are pending.
Chosen solution is to return false if other rows have pending changes.
Also, we only allow 1 row removed at a time.
Updated test, changes and documentation.
Change-Id: I68baf6d221789b4754e891535070011c759a2155
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
The model can never do a good job of knowing when user moves to a
new row in the view. Faking it by detecting when another row
is changed was not a good solution because it cannot detect
when the last edited row is left.
Either the view should automatically submit when the user leaves
a row or the application should provide a way to submit.
This change made it possible to reuse the logic of flags() in
setData().
Change-Id: I2550e5b113bceba1a852fc21203babeca07c5748
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
For OnFieldChange and OnRowChange, inserting rows should not be
allowed if there are pending changes in cache.
Change-Id: Ia794332959a35a1de87e798ba1a74ace3dfae68f
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
For OnFieldChange and OnRowChange, before submitting new changes,
setData() and setRecord() attempt to submit pending changes and
revert them upon failure. However, they fail to consider that
reverting pending insertions removes rows from the model. As a
result, the new change can be applied to a row higher than intended.
One possible solution would be to adjust the targetted index for the
removed rows, so that the intended row is affected by the new change.
But this still causes the strange editing experience as rows jump
up just as they are being edited.
It does not seem right in the first place for the model to initiate
reverting changes. It should be up to the application to decide what
to do when data cannot be committed. In particular, setData() and
setRecord() should not have the side effect of reverting already
pending changes.
The chosen solution is simply to refuse new changes that don't make
sense for the edit strategy. For OnFieldChange, flag() will
indicate read-only when editing is blocked by a pending change.
Since setData() and setRecord() submit data immediately for
OnFieldChange, it no longer makes sense to resubmit changes
automatically before a new change.
For OnRowChange, setData() keeps the behavior of automatically
submitting a pending row before starting on a new row. This is
historical behavior and is probably motivated by the fact that
QTableView does not automatically call submit() when editing leaves a
row. The obvious shortcoming of this is that the last row to be edited
will not be submitted automatically. It also prevents us from flagging
rows other than the pending row as read-only.
For OnRowChange, setRecord(), being row-oriented by nature, should
submit the change immediately rather than waiting for the next call
to setRecord(). This makes setRecord() consistent with insertRecord().
Change-Id: Icb4019d8b7c53a7ee48f8121a7a525e8bc35d523
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
The tst_QSharedPointer generate another Process to test some invalid
codes, and it expect that the prcoess will crash and return a non-zero
value.
The process which is a console application was linked to windows
subsystem, and QProcess seems can not get its return value. This
cause the unit test fail.
In addition, when the process crash under debug mode, a debug error
report-dialog will appear, which is very annoying, so I suppress it too.
Task-number: QTBUG-24160
Change-Id: Ia1c872d4515c83b0aa516bcfe3783f59797d2d49
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Use QTest::ignoreMessage() so that the warnings don't appear in the test
output and so that the test will fail if the warnings are not produced.
Change-Id: I418d78819fc9dbfd7da2a8b6c0a1ebfa967347e2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These issues are permitted to go unfixed for ARM and MIPS, for the time
being.
Change-Id: Ibdf33dc42e3de19ef20e9dc50f12f451ea6dbf23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test has been repeatedly unstable.
Task-number: QTBUG-24796
Change-Id: I603965c0189ad6da0cdf48527c4919c55e1918b4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
QTreeView already does this in the exact same way. It's necessary to
call submit() so edit strategy OnRowChange in QSqlTableModel will
work as expected.
Change-Id: Ib430143e8a71f3b0bcd842fcc772cc7ee4525f0a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Added support for QString overloads taking a QRegularExpression.
Change-Id: I8608ab0b66e5fdd2e966992e1072cf1ef7883c8e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor NSWindow creation into createNSWindow and
setNSWindow. This is necessary to support QMacNativeWidget
where we re-use an already created window.
Implement popup window handling. Make sure the window
is displayed correctly and closes when it should.
Take control over window activation in order to prevent
infinite loops involving the QtCreator "cmd-k" window.
Activation events are for now not sent to popup-type
windows.
There is now a different set of test failures: add
and remove some QEXPECT_FAILs.
Change-Id: I229761b59f90c9815b968eacc2cbc9c20cc5047e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This patch renames the functions in Qt5 according to the
notes. It also renames resizeMode to be consistent.
The old functions are both marked with both QT_DEPRECATED
and '### Qt 6 - remove'
All usage of the function within the qtbase are also
changed to use the new functions.
Change-Id: I9e05fa41d232e9ca43b945fcc949987017f3aedd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Removed the Q_DECLARE_METATYPE in favour of first-class support
inside QMetaType and QVariant.
Change-Id: I904236822bfab967dc0fbd4d4cc2bcb68c741adc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Duplicated code was removed. As an side effect:
- one runtime flag check was replaced by a compile time check.
- is enum flag can be used together with built-in types.
Change-Id: I54173e7b07ce7e487d3cc21ba24dcccd28b5d049
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Resource files are expected to be readable.
Change-Id: Ife2b624e69b58e2fb996bc3e210a6e6c5c6852fe
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already commented out when the test was added to
the Qt repository and does not compile when uncommented as it calls
non-existant overloads of QtConcurrent::FunctionWrapper1::operator().
Change-Id: I5a02efae4b89e2815b077474aa7cd0192dcb2730
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Seen with gcc 4.6:
tst_qarraydata.cpp: In member function 'void tst_QArrayData::grow()':
tst_qarraydata.cpp:1445:29: error: narrowing conversion of 'i' from
'size_t {aka long unsigned int}' to 'int' inside { } [-fpermissive]
Change-Id: Iad55659554b64ee34655640d606153f058a8cd05
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Checks if model has any changes to submit.
Includes new test covering isDirty(index) as well the new
overloaded function.
Task-number: QTBUG-3108
Change-Id: I0ccbda45d5d9f06434cf1e1c037a9efb76d0cc37
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
1. QJsonParseError::MissingObject defined
2. QJsonDocument::fromJson() will result in defined error after parsing
of something like "{ 'key':1 , }" or "[ {'key':1}, ]"
Change-Id: I8e6234a03b8aca4e5ad6180f273f91066b86d7a1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In commit 75286739 it was assumed that negative positions shouldn't
influence the size of the returned substring. That however changes
behaviour that was depended on even inside Qt.
With this change, the old behaviour is reestablished.
A negative value of n is still taken to mean "all the way to the end",
regardless of position, and overflows are still avoided.
Change-Id: I7d6ed17cc5e274c7c7ddf0eb0c3238e1159ec4f6
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
No longer base the implementation on a QWidget which is not
necessary when all that is required is a message window listening
to task-tray messages. Export a service function creating a message
window from the Windows native interface and use that.
Task-number: QTBUG-20978
Change-Id: I01d0faeac777df4eee802c51d2bc722fce814080
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Change-Id: Id565fa1eb8fe13c62a93a5afa39a5701ce7b20ea
QPixmap::grabWidget is deprecated, which calls QWidget::grab() at present.
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
GCC complained about undefined behaviour when
deleting subclasses of AbstractTester through
pointers to AbstractTester, and it's doing so
correctly...
Change-Id: Ie641281d8aafe32c5c9784e8aa39672ff0b699c7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is a semi-automatic search, so I'm
reasonably sure that all the exported ones
have been caught.
Change-Id: I314d341ad0db4e9d4bbf353a9537c9422ad8a54b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These unit tests do not depent on QtWidget.
Change-Id: I95526125c563885c0531da7ebfee06bca9a87b1c
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Subclass QAccessibleEvent to give details what changed in the
state change.
Change-Id: I9005d311e85a3c8bfa6e062833fa6a8a7dc6a4a4
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The test was assuming that "data()" is a special function in autotests,
but that hasn't been the case since early prototypes of testlib.
Change-Id: Ic24cf5dc539b55d12eba0a6ab17173e2ed698f21
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Use const_cast to avoid "deprecated conversion from string constant to
'char*'" warning when building argv arrays from string literals.
- Use Q_UNUSED to avoid warnings on unused local variables.
Change-Id: Idd2c8279adc102b6ebc6af7486ba26fe9ed4e7c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the various versions of the failure message align consistently so
that it's a little easier to compare the actual and expected values. Of
course, the value won't align nicely unless the "actual" and "expected"
strings are the same length, but at least this commit makes that
consistent across all versions of the message.
Change-Id: If9ce231df3b5d279a06f6458fdb5da0aa4586068
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add Q_IS_ENUM() macro to determine if a given type is an
enumeration. Use information from that in QMetaType::registerType()
to store whether custom registered metatypes are enums or not.
This information can then be accessed by calling
QMetaType::typeFlags(int type). This is used by the declarative
code to determine whether a custom type in a variant can be safely
cast to an integer, which is required to allow passing non-local
enums as signal/slot params.
Change-Id: I9733837f56af201fa3017b4a22b761437a3c0de4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The function is public, so it should validate input instead of crashing
Change-Id: Id67463b0b61ab74a76c1ede7f052bdbed37822b6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Antialiasing of fonts was causing two tests that relied on finding
at least a certain number of pixels of certain color to find one or two
too few pixels of that color and thus fail.
Fixed by increasing the amount of text displayed to make sure enough
pixels of correct color would be present.
Also removing the test insignification, as the test will now
pass completely when run under Windows Classic theme, which CI uses.
Task-number: QTBUG-24323
Change-Id: Ic0b614d33e4e4f5df18d53cb72a05db5d8b6b5e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
