Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Clang does not recognize the compiler flag 'no-arc-abi' anymore.
This causes a warning, which will fail the build. Not sure
what the flag does, as I cannot find any documentation for it, even
after grep-ing through the sources (both clang-600.0.57 and
clang-503.0.38)
Change-Id: I39fae3fd108a8edb978f4264935a069cce4c302a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The Xcode and SDK settings are expensive to resolve, as we're using
system() calls to resolve them. We now try to detect the presence of
a .qmake.cache file (and inform the user that creating one would be
a good idea), and use the file to cache the various settings after
resolving them.
The Xcode logic had to be moved form xcode.conf as part of the mkspec,
into default_pre/post.prf, so that we could cache() the resolved values.
Task-number: QTBUG-30586
Change-Id: Ib5368cfee6f7e4a4a33f6be70d0e20d96896fe56
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of unconditionally linking to Foundation, UIKit, and QuartzCore,
we leave the dependencies for the iOS platform plugin, where the libs
are actually used.
Change-Id: Ie8cfad2c8230d1f1af6933b831e443fecb0c93f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace all tabs with proper space characters and consistently align
the '=' characters. The default alignment for the '=' of 25 characters
has been left as is to get a minimal diff. Lines with the '=' further
to the right and those belonging to 'proper code (TM)' have not been
touched.
The work was mostly done using the following python script (might
come in handy again...):
import sys, re
indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character
p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)')
for fn in sys.argv[1:]:
with open(fn, 'r+') as f:
lines = []
nl_count = 0
continuity_indent = None
for l in f:
m = p.match(l)
nl = l
if m:
n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1))
if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0:
n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4
n_spaces = max(1, n_spaces) # we want at least one space before '='/'+='
nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n'
continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$'
elif continuity_indent:
nl = ' '*continuity_indent + l.lstrip()
if l[-2] != '\\': # check when to stop the continuation
continuity_indent = None
elif l.startswith('#'):
nl = l.expandtabs(2)
if l != nl:
nl_count += 1
lines.append(nl)
if nl_count > 0:
print fn, nl_count, len(lines)
f.seek(0)
f.writelines(lines)
f.truncate()
Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt uses a lot of minor C++11 extensions such as long long, commas at the
end of enumerator lists, and extra ';' outside of a functions, and not all
of these can be silenced, so we build without warnings for C++11 extensions,
since we plan to enable C++11 at some point anyways.
Change-Id: I3ede2fb653c25475a3bd2b860c0c80c6cf6abef5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For Mac OS X we currently specify build tools without an absolute path,
which means we end up using the ones in /usr/bin. This is wrong, we
should be using the tools from the toolchain of the chosen SDK.
For iOS we do specify an absolute path, by resolving the toolchain
path in the iOS makespecs.
To solve the situation on Mac OS X, we move the logic of resolving the
toolchain path to sdk.prf, and share it between OSX and iOS.
For configure we need to duplicate some of the logic from sdk.prf, as
configure pulls out QMAKE_CC and QMAKE_CXX for running some initial
tests and building qmake. The new macSDKify function also solves
the issue of missing sysroot and deployment version in the flags.
Change-Id: Ib1d239c9904cf3ccee5214b313cf6205869a1462
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If there are minor differences later on we can put them in the
mkspecs' forwarding header and/or introduce a macx specific file.
Change-Id: I2a93107838e0d8434c0d444db3064e0a462fa656
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We need to figure out where to draw the line when it comes to warning
about unknown compiler (Clang), Xcode, or SDK versions, but for now
building with Xcode 4.6 should not be an issue. We'll have to revisit
this and test with the full set of compiler/Xcode/SDKs we support
before the final release.
Change-Id: Iac3ec3a25c0f7618b2c3714657d147f17f834d97
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
At some point we want to build with C++11 support, but for now we silence
the warning.
Change-Id: I40deb0925d459eaf06e324dddc0a2e9893c57615
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Defining QT_QPA_DEFAULT_PLATFORM_NAME in qplatformdefs.h is not
neccecary, as qconfig.h will already have this define written by
configure.
Change-Id: I89d9191533f6b4e6bfd5eade6cc0dced02b50f81
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
And use configure's -sdk argument to choose between the iphoneos and the
iphonesimulator SDK. xcodebuild -showsdks can be used to list the
available SDKs. Passing an SDK without a version postfix implies
the latest version of the SDK.
Change-Id: I881df754d522fc91aaa16ba3e39cf0c37a21a1f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead we deal with any differenced by setting variables in the top
level makespecs, that are used by the common makespec configs.
Change-Id: Iae1fb5fef8c95778511ed400008731989b446f3c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
NEON detection is handled by configure's arch test, and THUMB2 is the
default for ARMv7.
Change-Id: I8ec3ce0ec6af9ad8d9509890aa1f8c87e18364d5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We now require SDK version 4.3 or above, and armv7.
Change-Id: I4766e277a3a4a32712bf2ec27fede694e8316c95
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There's no need to duplicate the logic for device vs simulator. The only
difference is the iPhoneOS/iPhoneSimulator name.
Change-Id: I87c57fa785279a3ee258b76fdac8317e52e7daa2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We can use xcode-select -print-path to get the /Developer directory.
This also removes the need for the "legacy" makespecs, which only
differ from their non-legacy counterparts in the location of the
Xcode developer directory.
Change-Id: Ia9245033a4b82cc3933226bf998f07177b60871f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Qt5 requires Mac OS 10.6, so we can remove checks such as
if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
Change-Id: Iea21727a277291148704ecf9677ed0b68c24920f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it differed from QMAKE_LIBS_OPENGL only for the irix/sco/unixware -cc
specs for not entirely obvious reasons. as all these specs are obsolete,
remove it.
Change-Id: I7d50ffa11ff830371ea52c9ebe25e1f1bc56b307
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Removed QT_GUI_DRAG_DISTANCE & QT_GUI_DOUBLE_CLICK_DISTANCE from the
iOS qplatformdefs.h header as these values are dependant on display
pitch and should be calculated by the platform plugin.
Change-Id: I00c377483ad73cad19a2fe729cb3f45e9271e3ac
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Modified common MacOS gcc config for iOS compatibility. Added iOS
mkspecs for iOS devices and simulator using G++, LLVM-G++ or CLANG
compilers.
Change-Id: If0a0b1a3ce4e0dc4db319a315e227a9d31549399
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
