Static builds of Qt will automatically enable C++11 for all projects,
but this happens in mac/default_post which is after our check.
Change-Id: I22a01e5d876242263fa31f8a404a65905c6c1877
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Right now /dev/fb0 is hardcoded. This is not ideal. Therefore
QT_QPA_EGLFS_FB is introduced. This environment variable can be set to
a different framebuffer device. Once it is set, eglfs will use the
specific device. This is similar to linuxfb's fb=... plugin parameter.
The actual behavior depends on the board-specific implementations.
For now only iMX6 has real support. It extracts the index from the
device name as bind the EGL display to the corresponding framebuffer
using the vendor-specific fbGetDisplayByIndex(). Other hooks can
follow suit later on.
With this patch eglfs is at least on par with linuxfb, meaning that,
if the board supports it, different apps can run on different screens.
Task-number: QTBUG-36113
Change-Id: Ia3c88bd06e108bc668433e3c5c3fce34a5a0e73d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Those paths need not be in INCLUDEPATH: qmake always adds them to the
compiler command-line and we should match the behavior if we expand
INCLUDEPATH here.
Change-Id: I89508d15ac534b54ae873a42c4ad9764408042b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...unless the user passed the -no-sse2 option to the compiler.
[ChangeLog][Important Behavior Changes] Qt now automatically generates
code for processors supporting SSE2 on i386 platforms. To disable
this, pass the -no-sse2 option during Qt configuration. Since this
feature has been present on CPUs for 10 years and since Qt no longer
checks for runtime support for SSE2, we strongly encourage users to
leave the default setting on for best performance.
- For Linux distributions that must retain support for CPUs without
SSE2, we recommend doing two builds of Qt and installing the
SSE2-enabled libraries in the LIBDIR/sse2 directory. Tools,
plugins, and examples are not affected.
- See discussion on the Qt development mailing list:
http://lists.qt-project.org/pipermail/development/2013-November/014085.html
Change-Id: I7f9b1f58a9f66b6e5fe295bac15f87d34343695e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Now the only way to enable Neon support is to change the mkspec.
[ChangeLog][Important Behavior Changes] Qt no longer checks for
support for the Neon FPU on ARM platforms at runtime. Code optimized
for Neon must be enabled unconditionally at compile time by ensuring
the compiler supports Neon. You may need to edit your mkspec for that.
Task-number: QTBUG-30440
Change-Id: I4df9b2bf3cd022f8ed70f02f16878cb2cb3fe6fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is a partial revert of 39e04b0222.
The original change moved the special make install target path logic
into the logic for the app template to make it possible to remove the
condition that excluded builds inside the Qt directory. This was
to make it possible to build examples in the Qt directory for Android
without moving them. However, this broke user library projects,
specifically when they were part of a subdirs project and should
have been automatically installed into the Android package. This
patch brings back the logic but only enables it for library projects,
meaning that the only examples inside Qt which cannot be built
correctly are library projects (which didn't work anyway).
[ChangeLog][Android] Fixed regression in "make install" on
library projects on Android so they can be used inside subdirs
projects again.
Task-number: QTBUG-34781
Change-Id: Iabf53ed68845b2ddd4ae66656e1372c96185660e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Changed MIPS DSP portion of the mkspecs/features/simd.prf file in order
to fix the corrupted build system for MIPS platforms.
List of the additionally optimized functions
from file src/gui/painting/qdrawhelper.cpp:
- qt_blend_rgb16_on_rgb16
- qt_fetchUntransformed_888
- qt_fetchUntransformed_444
- qt_fetchUntransformed_argb8565
from file src/gui/image/qimage.cpp:
- convert_ARGB_to_ARGB_PM_inplace
from file src/corelib/qstring.cpp:
- ucstrncmp
- toLatin1_helper
- fromLatin1_helper
Change-Id: I5c47a69784917eee29a8dbd2718828a390b27c93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Get the CXX compiler using $$QMAKE_CXX instead of ${QMAKE_VAR_QMAKE_CXX}
which causes shell syntax errors when combined with the silent flag.
Task-number: QTBUG-36159
Change-Id: I26cdbe788a20bd2df1aa3563694648e41c082a2c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This would mean we don't pass -Werror when under CONFIG += warn_off.
However, that's not the main goal. The main goal of this change is to
have -Werror appear *after* -Wall -Wextra.
With some compilers, like Clang, this is necessary to have the
-Wno-error=foo options work properly. For example, if the -Wfoo
warning gets enabled by -Wall, Clang will treat it as an error if the
arguments appear in the following order:
-Werror -Wno-error=foo -Wall
But not if they appear in this order:
-Wall -Werror -Wno-error=foo
Change-Id: I38c820bffc8277d909391e9bf557db5347836b9c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Base modules already work and produce no warnings.
Change-Id: I932d7aaecbe3404f180e185bf1e9fff4d488a05d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
As we add more classes with RValue ref qualified methods we will need
the same _compat trick and no-pch support as QString.
This patch moves the extra compiler to precompile_header.prf which is
automatically included when pch is used.
Change-Id: I422a355fd11f499ce0648a90b0385f2a6f699fcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
while the meaning of the error message is actually pretty obvious from
the context, some people apparently expect an equivalence with their
package manager's terminology.
Change-Id: Ie7a31887bf5086e5d1d7de7e339a6d08571a4d01
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Processing the object file with ld strips away debug information for
the main() function, resulting in the debugger not being able to
break on specific lines of the function.
It also causes issues when externing sybols in main's object file.
We revert back to the approach of using the strings in-line in the
object file (which is why we keep the name the same length, 'qtmn').
Task-number: QTBUG-35553
Change-Id: I8b0acee36f48ecfefa2e4fd008a842365713d985
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Using wmain causes the problem that the linker seems to create some code
around it, which calls ExitProcess. That function however is forbidden by
the Windows Store Certification process and hence you cannot publish an
application currently. This does not apply to Windows Phone, which links
in such a way that this problem does not occur there.
With WinMain as the entry point this does not happen and also is the
default entry point. Testing locally shows that certification goes fine.
Since it does not pass the full command line string, the C-runtime method
__getmainargs is used instead. This also gives access to any environment
strings which may be passed.
Note that MSDN states that this function should only be used for desktop
applications. For XAML/C++ scenarios there is no entry function at all,
but rather the App object gets instantiated in the default template. But
this only works for XAML itself and not for plain C++ applications,
probably some other entry wrapper is created on the fly here.
Done-with: Andrew Knight <andrew.knight@digia.com>
Change-Id: I8a118eddf6cfeddeca7d676267e979af17123e02
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
QtWayland uses QtWaylandScanner to generate c++ files which will be
subclassed. This works ok in QtCompositor as it implements the pimple
pattern. However, QtWayland has to expose a library called
QtWaylandClient as a way to create specialized wayland plugins. These
classes don't promise an ABI, and has limited API guarantees, so they
subclass the classes generated by the QtWaylandScanner directly. For
this library to be possible, we have to install the generated files.
Also, it should be possible to use the private API, and that's not
possible without the generated files.
Change-Id: Id55200fe23652587390dabf84ca846e4f39cf70e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Those flags are required to pass the Windows Store App Certification
process. Otherwise apps are not allowed to be published.
The SAFESEH option is only required for x86.
According to documentation APPCONTAINER only talks about the
executable, but when running through the certification, the Qt modules
are reported to be errornous as well.
Change-Id: I5450687dcd5bc537149e331332e253c4617df55d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
libc++ is an alternative stdlib implementation for clang.
See http://libcxx.llvm.org/ for further details.
The library is enabled by adding -stdlib=libc++ to the command line.
Change-Id: I07d09cbb69b59b579d3754c99d717d2ac6d44d67
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise Xcode might choose to use libc++, eg when the deployment target
is iOS7, and this doesn't work when Qt itself was built using libstdc++.
Change-Id: I0b0f36666ed318be9aae87ebaeb0d344109566ac
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Generating the dSYM file takes a long time due to our relatively large
static libraries, and is not really useful for a debug build where you
are likely to have the object files and Qt libraries available on your
host system for debugging anyways.
Change-Id: Ie7549975f271de8c56ca04bd28b29e6ed65f16cb
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's very unlikely that these artifacts will need rebuilding during a
debugging session (these pdbs are meant to support crash dump analysis).
Change-Id: Ia8138f9298355b402d8dd3f042f85b669693de64
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the application will not scale to the full resolution of
the device. We copy the image into the Xcode project, since it's
internal to our build system and not meant as a template to be
edited by the user.
For 5.3 we need to provide a proper qmake/qbs mechanism to handle
launch images.
Task-number: QTBUG-31431
Change-Id: Ied0b2843a78c5ea865750e0404418ced7ad27082
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
As of CMake 3.0, the output of `cmake --version` now has a second line
showing that it is maintained by Kitware. Change the version parsing to
look only at the first line of output.
Change-Id: I347de4c376e0bde25a43a38d59587d9b63f6b43a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is inappropriate on Windows, and breaks non-prefix builds there.
This is only needed when we calculate a relative path from a sysroot,
so only add it in that case.
Task-number: QTBUG-34880
Change-Id: I0e3b3d977a7b56649e4ba0077ac574aabf1dc915
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Latest QNX versions support _readdir64_r. It will be used by
QFileSystemIterator now, when available to support large file
systems.
Change-Id: I40135f405ad72e1ba85c6a4cd282144dd8171bc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
There is no real printing support though, it just prepares
the land for bringing printing support for API-19+.
Change-Id: Iabf78499f8fe1e4d2527e339cee5746acb8f3b3f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
!build_all is a sufficient condition for bundling headers in both debug
and release configurations, as it means that we will likely make only
one of the builds, and that needs to be self-contained.
Task-number: QTBUG-34575
Change-Id: I1a19e4b619eeff207cfbfd50d3b761053aeaa667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
as this new cache category comes without side effects, we can
unconditionally create a cache whereever we are. this allows us to be
performant without explicit user action.
Task-number: QTBUG-31340
Change-Id: I6b88b20b61e8351aa8cbf94ad3eec65adac6e1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Compared to other platforms there is no concept of a console
application in WinRT. Hence all applications need to be UI
applications and use winmain.
Furthermore winmain takes care of launch arguments to be
properly converted to arguments passed to user's main().
There is a chicken and egg problem with config.tests as
compilation needs to have an existing entry point which is not
available at configure time.
Hence hardcode the entry point to main for configuring to WinRT.
Those tests are pure compile tests, so the logic of the test
does not change.
Change-Id: I4d3186691a8440845c24b2529cc9646e86dfd8da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Filter out module QML import paths that point to
nonexistent file system paths.
Change-Id: I897ef50593eeb46c6c9eaec27313ec12e6113cb6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Some modules, such as Qt Multimedia, needs special permissions
to avoid getting exceptions at run-time. We should apply these
by default to the AndroidManifest.xml so that an application
using e.g. the camera will work out of the box.
Task-number: QTBUG-33953
Change-Id: Ibc1f086d249197b63e7ed1075ae7d54bdd1212f2
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The qtAddModules functions resolves deps internally, but doesn't affect
the original QT and QT_PRIVATE variables. We need to pick up situations
such as the user adding QT += quick, which implies QT += qml through
the QtQuick module's dependecies.
Change-Id: I14411dbea3e4f7402be404073a3fe8f18dbb165f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to add the correct suffix to the libs we add when
running qmlimportscanner. Otherwise we will always add
release versions of the libs instead of debug versions
when generating debug builds. This in turn will confuse the
xcode generator that will try to convert the libs in
LIBS to native Xcode build variables.
Change-Id: I4d9fab49ad9e644e9bfd06caf79fc084bde2a3b7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Winmd is not used, so there is no reason to embed it.
Change-Id: I0820256aecd9c3c71b0b0c8afa53941b03f97363
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
In most cases, _S_IFLNK isn't defined, but ensure that we still have a
QT_STAT_LNK that works, for example for use around archive files
(zip/tar) that can contain symlinks
Change-Id: I9881e524b79845ce6b474b9a86e5fb25aaa31820
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When building under Xcode we can limit the object files search to the
current SDK and debug/release configuration.
Change-Id: Ic405f13f46a594e3ed20d82ca6b84e7e67edebfc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
I had the -fPIE option in my personalised "linux-icc-optimised" spec,
so I never noticed it was missing in the standard one.
I have no idea when -rpath-link is necessary. It isn't for me.
Task-number: QTBUG-34425
Change-Id: I54b2fb8cda10b9197d81b5630b1d29b8c338d96a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make already the creation of the generated cpp file depend on the
creation of the generated h file, which transitively ensures that
the cpp won't be compiled before the h is there.
Change-Id: Idd3aec8d72dac341e835a3d1ef8f2986dbc1ab9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Conceptually a Qt for iOS SDK or source build should support building
for both simulator and device, based on the same qmake binary and Qt
libraries. Qt Creator or Xcode should then be able to use the same Qt
version while still building for a single target at a time. This
applies to user libraries as well, which shouldn't require switching
to a different Qt when changing target platform from simulator to
device.
We achieve this by using Qt's exclusive_build feature, where we build
for the two targets in parallel, and then teach Xcode how to choose
the right library dynamically at build time.
Change-Id: I06d60e120d986085fb8686ced98f22f7047c4f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Makes it possible to join two separate builds, and opens up for using
exclusive builds to do this.
Change-Id: I87ccbdd55511fdfbef3fe8b581f40525ebf077ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Removes the need to pass ARCHS to xcodebuild for simulator builds.
Change-Id: If15e9d387c416c5c9f83c50f5903ae0cd517ff34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise we won't pick up CONFIG+= changes on the command line or
from the project file.
Change-Id: I6f7e9380f971e6271de5659534e9565024fe041d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
module names use dashes, but the internal module representation uses
underscores, so we must translate.
Change-Id: Ib6983d3731e7dae2a4d6232f8a5202390fd425e9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before this patch, we would copy "$QTDIR/qml"
directly into the bundle as "qml". This would cause problems
if the user also tried to deploy qml files to a "qml" folder, or
if any other file in the bundle ended up with the name "qml" (which is the
case for QtDeclarative/tools/qml, where the executable is called "qml").
This patch will instead copy the contents of each import folder
into QMAKE_QML_BUNDLE_PATH, which will default to "qt_qml" on iOS
and "Resources/qt_qml" on OSX.
We also change the implementation to use a post script rather
then QMAKE_BUNDLE_DATA for two reasons:
1. Xcode does not like "copy build phases" to copy folders, only
files (You cannot even create such a phase from Xcode, although
it is possible to force it the way we create project.pbx. But
this was error prone)
2. We need to strip away unneeded files from the bundle, like
archives (which are linked in statically, not dlopened run-time).
Using rsync lets us copy and strip in one operation.
Change-Id: I7c2117f6cfbe11efdc272dff71adb0b1e619a5ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Synchronize .pdb file writing, otherwise parallel builds
will fail, when different compiler instances try to access
the same .pdb file.
See also
http://msdn.microsoft.com/en-us/library/vstudio/dn502518.aspx
Change-Id: I4998f10458d320fd98d633eded02d90bf25ed884
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the module project files declare what plugins they need, as that is
necessary for automatic android deployment.
enable wider usage of this by making the information available from the
module .pri files.
caveat: the variable is called "types", but is in fact paths, so there
can be particular plugins named.
use this new facility to replace the egregious hard-coded list of
plugin-to-module mappings from create_cmake.
possible todo: automate populating DEPLOYMENT (for wince, and whatever
else).
Change-Id: Ibb9c07cfe2b0008905204cbeb81e9c8e2ae4dc69
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of being magic attributes of the main modules, the privates
are now proper modules of their own.
this cleans up some code paths, is more mappable to other build tools,
and enables private modules to depend on other private modules.
note that the library path is needed even in the "empty" private
modules, as in the framework case that's where headers are found.
consequently, the modules need to be explicitly marked with the new
"no_link" flag. this required some reorganization of qtAddModule().
Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is needed to ensure that list(REMOVE_DUPLICATES) can work.
Change-Id: I3d992aa244fcdfbda7e3b48ce416e0ba5ffcde96
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is necessary so that list(REMOVE_DUPLICATES) works properly.
Change-Id: Id268637d76b1a8785c9ff0c6e09e9ad8a62bbfb6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it was introduced as a hack to simplify writing tests, but the change to
make use of it was backed out of testlib and nobody seems to care.
Change-Id: Icc86621b865276e86593afdb923247bbdca19d49
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The current NDK uses CPUVARDIR variable to define whether x86 or armle-v7 is used.
Therefore, the whole structure uses these two definitions to separate simulator
and device builds. Renaming blackberry-armv7le-qcc to blackberry-armle-v7-qcc
allows to directly use CPUVARDIR during Qt5 builds.
For compatibility reasons the old folder is kept and includes the new qmake.conf.
Change-Id: Ia7feeeabe16eda48140a65178af28cbb9bd085a9
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
it's wasteful, given that exactly one add-on module (and most probably
nobody else) needs it.
i'd do the same with yacc and lex, but i suspect this would cause quite
an uproar.
Change-Id: Ic2a6ca19e829393835f824e31cd0893e78c3fd39
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise, make would upon distclean first remove the xcode
project, then try to do xcodebuild distclean. xcodebuild would
then complain about a missing project.
Change-Id: I0a9a6af6d86d1a95e37f4bbafa38c63d892bf1cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the variable may contain a complex command, so an exists() check is
doomed to failure if the tool is built dynamically.
also, the check is not really necessary: it failing indicates a bug in
the qt build system, and we don't really need to complicate the code to
deal with such corner cases.
Change-Id: I2e6087dcc6dd4a4f70bdf739550276f364c880dd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
if the user knows that no additional imports need to be linked, this
can be used to optimize the build time.
as it happens, it can also be used to fix the build of the qml tools
themselves ...
Change-Id: Id77aea1f20cabdc2e831540c61d8a4b8e85c040b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This was created for the iOS port and intended to be cross-platform,
but since then they got cold feet and never added the support.
It makes no sense to only support this on Android. We need to
remove it again and hold off until we can find a proper solution.
Editing the AndroidManifest.xml is the non-cross-platform
solution for this.
Task-number: QTBUG-34166
Change-Id: I51d53b82a3412a9016de01612dd8df9ae12c6633
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Setting QT_ARCH when empty is a workaround for a missing qconfig.pri,
since it hasn't been written yet by configure. As qconfig.pri is
loaded by the generic qt_config.prf, putting our workaround in
our own wrapper for qt_config makes sense, as it keeps the logic
close to where the original QT_ARCH is resolved.
Change-Id: I49ffc21cf5dea5ca5b6254ca8084a4dcdc359a72
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This approach is similar to the earlier apprach of defining main=qt_main
when building the user's sources, but uses the linker to rename the
symbol instead, which is less fragile than using the preprocessor.
To keep the hybrid usecase unaffected by our wrapper logic we declare
both our main wrapper and a fallback qt_main as weak symbols, which
ensures that when the user's application links in our plugin the
real main/qt_main provided by the user is preferred over our weak
symbols.
Change-Id: Ic76f3ba8932430c4b13a1d3a40b8ed2322fe5eea
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Run qmlimportscanner, add found plugins to the LIBS
line, generate qml_plugin_import.cpp.
Change-Id: I6c6b927cceb36fa2dc405ad698f26d20398b33c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This code was added as an optimization for showing a mouse cursor on
the Raspberry Pi. What happens though is while the mouse cursor does
move more smoothly, the actual application becomes less smooth when the
mouse cursor is moved. By removing the custom cursor code, performance
will no longer be effected by rendering a moving mouse cursor.
Change-Id: I9f8ac6c236cd4ff6d8e1d999a461c3e6db75d7e3
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Change-Id: I2e874af4f5bf22a3028b7099c39436c400136386
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When building for x86, the prefix for the tools is not equal
to the prefix for the toolchain directory, so we need a separate
option for this.
Task-number: QTBUG-34110
Change-Id: Iefe8c37892eb6c31fc8762bfb7bc7c6c23cd8b1e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The source includes shouldn't be used by installations, so
don't install the extra file, but only use it if the package
is used from the build-dir.
Task-number: QTBUG-33970
Change-Id: I08f91b8a716e935cb04d1233d44cf5c092e240ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The DLLDESTDIR is not related to the install location and is not
populated for prefix_build configurations.
That resulted in the CMake files attempting to find the dlls in the lib/
directory instead of the bin/ directory.
Change-Id: Iec6a7c9b6dd656278b70ab128f3df9e8c45bbe4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* The explicitly linked support libraries like gnustl_shared, etc. can be
linked as private libs, there's no need for them to show up in the .prl files of our libraries.
* Removed the explicit linkage against libsupc++, which is a static library whos symbols
are also available in libgnustl_shared. It is only needed when linking against gnustl_static,
which we fortunately don't do.
For QtQml on Android this is more than just cleanup. Without the first change, the libgnustl_shared
comes early on in the link line, because it is a dependency of for example Qt5Network. Anything that
qml.pro itself adds to LIBS comes afterwards. That is not intended, we want libgnustl_shared to come
at the end of the link line, in order to make sure that the linker finds an overriding symbol from
another library earlier in the link line first.
The explicit linkage against libsupc++ affects the same, as that's the library
that contains the symbol we want to override locally (__cxa_end_cleanup).
(needed for QTBUG-33892)
Change-Id: Id6dff733d6610ae8b15aa72f9cf60ae2c7834194
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We assume new Xcode versions and toolchains won't break anything, just
like for toolchains on other platforms.
Change-Id: Idb723dbcdbc82e85db1c55b19cd5fe863ca90933
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
As they are closely tied to the macx-ios-clang mkspec and can't be shared.
Change-Id: Icb59304cc1e4be12732f50175f3f84be289300c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The allows us to remove the custom logic in default_post for finding
the plist files, and also fixes issues when the wrapped mkspec had
its own feature files.
Change-Id: I4c26cf6a7809f527e170c51c57f59aaf6088774c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
