A recent change uses an accessibility function even if accessibility
is disabled.
Change-Id: Ibf9afbb90120772065743b2f9dd3615e4e6a2f37
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This separation makes it possible to make a
canadian cross build of Qt on a linux build machine.
The canadian cross build requires an external Qt that
runs on the build system.
Change-Id: Ifd83a4c6376d3299647e74bb349a3452a6f433fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The previous implementations did not check the full mantissa. The result
was that certain NaN values were seen as +/-Infinity.
A nice benefit is that the generated code for this implementation is also
faster.
Task-number: QTBUG-47692
Change-Id: I1507ec579ccd9a2ab97da8cf83dabbc5d6e28597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We want to be sure that the conversions are independent of the current
locale set by setlocale(3) and we want to test both directions of the
conversion.
Change-Id: I01be19e680588478d07fd65a48796e806e681863
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QAbstractSocketPrivate::readFromSocket() had a qDebug() that
references its q->... so it also needs its Q_Q() declaration.
Only relevant when QABSTRACTSOCKET_DEBUG is enabled (which it
normally isn't).
Change-Id: Ib82fd032fb2c4143a0987b9162377d0d7e968e95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since QSet<>::intersect() modifies the original
set, exitSetT1 has wrong content for next iterations.
Use intersects() instead.
Change-Id: I09e0961ec6dfb34ade88d48d1e009529aeab82b4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
1. _HAS_DINKUM_CLIB is defined whenever a C header is included, even when
Dinkum is disabled.
2. _HAS_* macros are always defined, as either 0 or 1.
Change-Id: I727b854a6a733e2028e6facc327e264d0c4c9e90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Somehow qmake doesn't add the correct rules for the Android makefiles,
so the build fails when cross-compiling from Windows. The reason for
that is unknown (could be related to that "qt_android_deps" config, but
that isn't used anywhere in qmake or the buildsystem).
This isn't likely to be a problem, since there are no global installs of
Qt on Android.
Change-Id: I1d0f78915b5942aab07cffff140f95ce32324030
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QGuiApplicationPrivate object is already destroyed by the time
the plugins are cleaned up during the application destruction, causing
a segmentation fault in updateInputDeviceCount().
There's no point in calling updateInputDeviceCount() in the destructor
anyway as the whole process is on its way out that stage, and we
don't support unloading plugins during the application lifetime
otherwise, so the call can just be removed from the destructor.
Change-Id: Id819d73cb8234ccedb6ea7c3e39950589ee680a1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Some of the examples make no sense without bearer management and
QNetworkSession is not defined if QT_NO_BEARERMANAGEMENT, so
tst_qnetworkreply.cpp has to be adjusted.
Change-Id: Ic2f73746cba74f670ae5b5e99b0be1461ff6d182
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The Windows code was always returning AnyScript, which in turn made
QLocale::textDirection() for the default and system locales always
return LTR, even if the Windows UI was in RTL mode.
[ChangeLog][QtCore][QLocale] Fixed a bug that caused
QLocale::textDirection() to always return Qt::LeftToRight and
QLocale::script() to return QLocale::AnyScript on for the Windows system
locale.
Task-number: QTBUG-49031
Change-Id: I7e6338336dd6468ead24ffff14112c8d348eedba
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The function is not limited to creating top level windows.
Change-Id: Iedeeba0093f251c852e9b7c9ba23c567a79a53f8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As we cannot style the navigation elements freely with the restricted
version of CSS that QTextBrowser supports, we need to inject
separator elements between the prev/next page links.
This change adds a 'bullet' character wrapped in a <span> as a
separator. A rule is added to the standard offline CSS to hide the
separator as it's not needed there.
Change-Id: I13220a2a60e2d3063f94bc7dff0e4320d0bed4f6
Reviewed-by: Martin Smith <martin.smith@digia.com>
Move touch device initialization code to QWindowsContext and
replace the assert on the touch device in QWindowsMouseHandler
by a call to the initTouch().
Task-number: QTBUG-48849
Change-Id: If8573b8283ef94e7fd015f6edc626e3c8cc0b139
Reviewed-by: Joni Poikelin <joni.poikelin@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Change-Id: I50a3e5584a1bc2553acd4bbec1b9a290b8475e47
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
We need C++11 support. The ChangeLog is in the previous commit.
Change-Id: Ib056b47dde3341ef9a52ffff13ef6bfa55462a22
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Commit 4bb004de94 broke the linker
options in generated Visual Studio projects.
We need to call fixLibFlags on QMAKE_LIBS and QMAKE_LIBS_PRIVATE.
Task-number: QTBUG-48936
Change-Id: I2f12bf0117d27104cd34f2f43fdeb7b948fa375e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The latter is much faster as it doesn't have to deal with
time zones.
This change is safe, because the QDateTimes are only used for
comparison with other QDateTimes, which, from a quick glance around,
seem to be mostly, if not exclusively, in UTC. Comparsions work
across time zones, but the comparison between UTC date-times is
fastest.
Credits to Milian Wolff, from whose QtWS15 talk this advice is
taken.
Change-Id: I6859d886d8dc8e0a52fbe394fbb7b93a87b4739a
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Skip the correct number of bytes in the read buffer when expanding '\n'
into "\r\n" upon writing.
Change-Id: I5b01fc47c330dee5c83001abf0acd7d63d790b96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since there are circumstances where the session is not yet created after
start() is called then we should check if the session is valid before
connecting to it.
Change-Id: I94236f76e4be2433a8c96eb91ce2d4b4d42f2fd9
Reviewed-by: Richard J. Moore <rich@kde.org>
- On NetBSD, the defines were not properly defined;
- On all other BSD systems, we use statfs which does not have f_frsize
member, revert to using f_bsize there.
Task-number: QTBUG-48267
Change-Id: Ia1ed484ac61a615fcbb5b45affb516b5e86a64b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use indexOf() to match individual characters, which is a lot faster than
QRegExp. As a side effect, don't try to expand what we just inserted.
Change-Id: I964fbd92055f2f2649e7d8ed5739cf1fc7cae927
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/2cc17a61eb6d0fee80fd388fcc5be03a59e4f2b5)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt 5.3 is the minimum requirement these days. Remove all fallback code
from sources and project files.
Change-Id: If6188a471197acadda4d6baee71804ba1a8026c6
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/847f10e9ccc8c3541782a790e04c85c6b4c701da)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Less typing and less cycles than join(QString) where appropriate
Change-Id: I6ebc0e17e4d7fd9845864dd95b7de4ba4dad6906
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/6431ab2c799553623ec3fe6a79f1e85484558dd6)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this fixes an assertion failure with qt4 mingw specs when PATH contains
a "." element.
Task-number: QTCREATORBUG-12528
Change-Id: I2b6b7e02cf38881d40bd78bb0d705f7d58d0736c
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
(cherry picked from qtcreator/d0428a05220ed0550dd84cdb8299a1fb37b0fe72)
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
assigning a relative path to QMAKESPEC or QMAKESPEC_ORIGINAL (in the qt4
windows legacy code) would lead to an assert further down the line.
just ignore such attempts silently.
Task-number: QTCREATORBUG-8477
Change-Id: Ie53d0ef004c743284b85de4e89f112e0161ff4b7
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/e017a1dc8b2030e509d6198315e9f6a9869667e7)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
just syncing up with qtcreator.
Change-Id: I2bda6961f6f1164bdc58acd78fa3d2221977f0cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/765ad6c3d28813d4baa0aeafd03076ba76557d3d)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it could be only triggered by abusing the function (no expansion
actually done), and nobody is using this to start with, but still ...
Change-Id: I3d4a23ae4d1eea07955572d8213094e0dc218f6d
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/cdc2a0f72334268684e0407e9b04b3188e00d4bf)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This prevents an access to free'd memory when opening qtcreator.pro.
Looks like qml2puppet.pro gets added to that cache in QMakeVfs::writeFile
with part of the including pro-file's filename in it. That part gets
cleaned when that containing ProFile goes out of scope, leaving a key in
QMakeVfs::m_files free'd but accessible.
Change-Id: I80b43d2fbb66c214647497ea97e6e3a587e274d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/336c3159617cdb3edd35021b5fb312d4d43f9a84)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QProcessEnvironment caches keys, so we must not pass it QStrings created with
fromRawData()
Task-number: QTCREATORBUG-9142
Change-Id: I29fade02f3bc4110fafb1b04d44f2e653951a2ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/99f15f1706868c4b2f84bc4164451bd69b3b8188)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we execute foreach loops now. this is (mostly) safe nowadays, because
a previous change added precautions against exponential value list
growth, so it's unlikely that two nested loops would keep the cpu busy
for a day as before.
we continue to exclude forever loops and loops with excessive integer
counts.
Task-number: QTBUG-8550
Change-Id: Iaa116086986cc7fd5023834753f791dd205102e5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qttools/dd4d594c787a62fa8aa12695c5d115c71b59bacd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
ProFileCacheManager::discardFile(s) may remove an entry from
the ProfileCache only when it is unused (which is the case iff
ent->locker is zero).
Change-Id: I9df2079087af6bd0d35dd121db6222e8a6ec9389
Task-number: QTCREATORBUG-14730
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
(cherry picked from qtcreator/dedcd25924743e494055c1e0195aeef0f3983a1d)
(cherry picked from qtcreator/b335b2a083e456e2b44b1e9454a0f4cd41e2a397)
(cherry picked from qtcreator/a027cbcd7051c634a51b6029dcb8a5b4bfe8b046)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The flex and bison rules generated the same files for debug and release.
This conflicts in parallel builds, e.g. when using jom.
Task-number: QTBUG-49003
Change-Id: I6f64760d83292e8bfad6fd0b4f8fbdd386e2213b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Enclose all debug operators within QT_NO_DEBUG_STREAM, declare
all public ones and make the others static. Add operators for
POINT and WINDOWPLACEMENT.
Task-number: QTBUG-48449
Change-Id: I33f2dba2bf486a8f5cb11f11f4e2b37cce086def
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The new version broke the build again
-> fix it again.
Change-Id: I75761d134d97a2784f1de5076412aa814fdf9bcd
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Gunnar Roth <gunnar.roth@gmx.net>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
These don't report ABS_X/ABS_Y, but are still a touchscreen. This is commonly
seen on Android hardware.
As a bonus, we clean up the flow control through device discovery: by using
memset, we can ignore the error value of ioctl() and just check the bits we
need.
We can also close() the FD instantly after running the ioctl calls.
Change-Id: I6405597dc34841c805552fa73ef86250eaae111c
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The printf-style version of QDebug expands to a lot less code than the
std::ostream-style version. Of course, you pay in type safety (but
compilers warn about it these days), you cannot stream complex Qt
types and streaming QStrings is awkward, but in many cases you
actually improve on readability.
But the main reason is that something that's not supposed to be
executed under normal operation has no business bloating executable
code size.
This is not an attempt at converting all qWarnings() to printf-style,
only the low-hanging fruit.
In this first part, replace
qWarning() << "...";
with
qWarning("...");
Change-Id: I1f6869b024103c98262f1deae014e0d7337a541c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
