If a composite widget is put behind one of it's contained children via
QWidget::setTabOrder, then our logic might replace the composite widget
with the contained child. In that case, we'd end up with a broken tab
chain, possibly resulting in incomplete clean-ups and triggering asserts
when shutting down the UI.
Handle this by stopping the last-child searching logic at the respective
other widget, and by not allowing both widgets to be the same.
Augment test case, and apply some minor refactoring to the code.
Pick-to: 6.5 6.2
Change-Id: I7d97dfa85315b6c01daa283253025d94a1727048
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
<bit> exists in C++20 and is properly both constexpr and optimized. But
in C++17 mode, we don't have constexpr bitops and instead elect to have
performance at runtime instead. But somewhere along the line, either
when they were added, when C++20 <bit> support was, or in any of the
bugfixes for other compilers, the nesting of #ifdef got messed up and we
declared that we had constexpr builtins for MSVC in C++17 too.
The macro QT_HAS_CONSTEXPR_BUILTINS isn't supposed to be used by anyone
else... but we ended up not being able to use it ourselves either. So
I'm renaming it to a more precise label.
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd1741b9b4060c9753
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A recent update moved handleScreenChange out of being a private slot.
Porting to the new syntax fixes the warning and moves to a compile-time
check.
Pick-to: 6.5
Change-Id: Ibd85c6caf7dca051d669250a94a82fbddbd3435d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Failing test functions fastMove, moveAccross, moveInOutOverlapped seem
to be stable in the meanwhile. This patch removes the blacklisting.
Task-number: QTBUG-109036
Pick-to: 6.5
Change-Id: I9a2b015572e4d8a4eac196d3985c052030fd84e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When rows are hidden (implicitly or explicitly), then their layout data
does not get fully updated. If rows get hidden after the layout data has
been calculated once, then we must make sure that their indices are
reset. Otherwise we might access array indices that are out of bounds
when the layout data structure gets resized to fit only visible rows.
For good measure, skip entirely over hidden rows when accessing the
layout data when arranging the widget.
Fixes: QTBUG-109237
Pick-to: 6.5 6.4
Change-Id: I4d6943b6a110edb61f60ce78d31f0fc64b5cc03d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This reverts commit 4096667d66.
Reason for revert: <Screen shot workaround is flaky.>
Change-Id: I6e01cc584c094d0d0b8c1544b9daf72d648dd002
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Due to an XCB library change, QXcbBackingStore::toImage() cannot be
safely assumed to return an image identical to QWidget::grab().
The test functions fastMove(), moveAccross() and moveInOutOverlapped()
relied on QXcbBackingStore::toImage() and failed.
They were backlisted on Linux/XCB.
This patch obtains a screen shot instead of an image from the backing
store on XCB platforms. It processes events until the screen shot
matches QWidget::grab(). It makes the test fail only if the comparison
times out.
The patch also removes the BLACKLIST file, containing only the test
functions mentioned above.
Fixes: QTBUG-109036
Pick-to: 6.5 6.4
Change-Id: I26dd5b89dc62b313db066a285f6ad7d4d92baaf2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Wayland omits optimizations tested in tst_QWidget::optimizedResizeMove()
and optimizedResize_topLevel() under certain circumstances, e.g. on
Ubuntu 22.04 / Gnome. This makes the test functions fail.
This patch skips the test functions on wayland platforms, if an
omission is detected.
This amends 2ec7a6322f.
Fixes: QTBUG-109746
Pick-to: 6.5 6.4
Change-Id: If0df6b1cf451a7f0dccfc1bb7411e895d7ae29a3
Reviewed-by: Liang Qi <liang.qi@qt.io>
The test shows an application modal QMessageBox, but assumes that doing
so will be non-blocking, which for macOS is not the case (yet). Instead
of making the dialog window-modal, which would potentially affect the
logic of the test, we disable native dialogs. This should be fine, as
the purpose of the test is to test the is_closing logic of
closeAllWindows, which lives on a layer above the native dialogs.
Pick-to: 6.5
Change-Id: I6d627984a6ca452b876f34404b669fce41a00851
Reviewed-by: Doris Verria <doris.verria@qt.io>
If a widget's geometry is restored to a screen, which is smaller than
the one it was saved from,
- the widget could appear (partly) off screen
- the widget's title bar and resize handles could be inaccessible
This patch refactors and documents checkRestoredGeometry.
In a first step, the restored geometry's size is checked against
a given screen size. It is corrected if necessary.
In a second step, the restored geometry is moved inside the screen,
if necessary.
It makes the function a static member of QWidgetPrivate in order to
expose it for auto testing and adds a respective test function to
tst_QWidget.
Fixes: QTBUG-77385
Fixes: QTBUG-4397
Task-number: QTBUG-69104
Pick-to: 6.5 6.4
Change-Id: I7172e27bfef86d82cd51de70b40de42e8895bae6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QWidgetWindow dispatched only tablet presses to the toplevel widget if
no child was found at the position; other events, such as hover events,
were discarded. The tabletTracking test case even documented that
shortcoming in a comment.
Fix that by falling back to the toplevel widget for any event. As
before, only press events initialize the tablet grabbing target widget.
Remove the now unneeded parent widget from the test case, and move the
test class into the only test function that uses it.
Amends ea615b421b and
8fd6cef372.
Pick-to: 6.4
Fixes: QTBUG-108747
Change-Id: I79050f1e063931e439945f64b50712dcc1ecb18c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test functions tst_QWidget::optimizedResizeMove and
tst_QWidget::optimizedResize_topLevel use a custom widget to record
paint events in a boolean.
Using QTRY_* or qWait() to wait for the boolean to become true stops
event processing upon consumption of the first paint event.
In case of multiple paint events, the next paint event will be recorded
in the next check and may lead to a wrong result.
This leads to flakiness on platforms generating multiple paint events,
openSuSE Leap 15.4 / XCB being one of them.
This patch replaces the boolean with a counter. It adds a
waitForPaintEvents method to the custom class, which processes events,
until the counter stops increasing. It returns true when paint events
have been recorded and false otherwise. It resets the counter after
each call.
It also removes the QSKIP on wayland, as the failure results from the
same reason.
Fixes: QTBUG-109093
Pick-to: 6.4
Change-Id: I59ee8bb4efeaf5417d5749d21e384bee89301ae0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It started being recorded as flakey after making macOS 13 a significant
config in the CI, but it's unclear why the test was not failing during
the nightly testing leading up to that.
http://testresults.qt.io/grafana/goto/-AzSwMKVz
It has also been blacklisted on macOS many times in the past.
Change-Id: I7be5fefb3669e9643a98d2ac82059bf0576c6d5c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a widget's palette has different brushes in Active / Inactive
color groups, or it is pixmap based, multiple paint events are
triggered. This leads to unpredictable, double entries in
QWidgetRepaintManager::dirtyWidgetList().
This patch overrides event() of all test widgets and ignores
activation / deactivation events in order to make the entries of
QWidgetRepaintManager::dirtyWidgetList() predictable.
Pick-to: 6.4
Change-Id: I164d7ab4148551590ac3c50fcc3b9f98c5ac0535
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QXcbBackingStore::toImage() returns a QImage that differs from what
is displayed on the screen: After multiple moves of children within
their parent widget, the last move is not always properly reflected
on openSuSE 15.4.
This patch blacklists the test functions fastMove, moveAccross and
moveInOutOverlapped on openSuSE Leap.
Task-number: QTBUG-109036
Pick-to: 6.4
Change-Id: Ideb505570df090b25d30762492d9c60beb6641ff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was forgotten to assign a simple palette to this object in
1576f82721
This patch adds the missing line.
Pick-to: 6.4
Change-Id: I0acf765d9646ecc8d49791d96b5ea910e11997fe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a widget's palette has different active / inactive colors,
multiple paint events can occur. This makes tst_QWidget functions fail
when they expect a spcific amount of paint events and the platform
theme provides a palette with active / inactive differences.
This patch adds a function to populate test widgets with a simple
palette, to prevent multiple paint events.
Pick-to: 6.4
Change-Id: If9b2faedcc5ca87ba24991cedd5e4ac927b02644
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The helper function TestWidget::waitForPainted returned after the test
widget had consumed the first paint event. In case of multiple paint
events, QRegion paintedRegions did not match the entire region that
was supposed to be painted. The test function children() failed/flaked
due to that.
This patch extends the helper function. After consumption of the first
paint event, it processes events until the painted regions no longer
change.
Pick-to: 6.4
Fixes: QTBUG-108764
Change-Id: I54e14bb07725dd1f602cc93085da13836e3b7494
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
saveRestoreGeometry() somtimes creates a 29px offset when debugged in
Qt Creator, which makes the test fail.
This patch adds a code comment to make developers aware of this fact.
Pick-to: 6.2 6.4
Change-Id: I920bd02eb7543faf8b25a0a242b888f3a3745e2a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
multipleToplevelFocusCheck() occasionally failed on XCB because
QApplication::activeWindow() was nullptr immediately after
qWaitForWindowActive() returned true.
This patch replaces QCOMPARE on QGuiApplicaiton::activeWindow() with
QTRY_COMPARE in order to continue spinning the event loop until the
condition has been met. It adds QWidget::activateWindow after show()
to ensure focus is acquired also when another window has received
focus in the meanwhile.
Pick-to: 6.2 6.4
Change-Id: If84eb8b77c5a6b16af271334a1fe5eb92c05644b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test function raise() occasionally failed because of unexpected
paint events being counted.
This is due to a QTRY_VERIFY returning after consumption of the first
paint event. If more than one paint event got posted, it will be
delivered and counted when no more paint events are expected.
This patch ensures that all paint events are consumed before resetting
the count and expecting no more paint events.
Fixes: QTBUG-68175
Pick-to: 6.2 6.4
Change-Id: I3e91a34e851da4bd01c7429e824d2b9101077a06
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The usage of the helpers was removed in 2011,
in bf8dfc394a.
Change-Id: I950812982148fd76bcc65c4781a144c21cb3c901
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When a compound widget is created not directly before its children,
then another widget will be in the focus chain between the compound and
the compound's first child. If one of those children is then made the
focus proxy of the compound, then the widget in between becomes
unreachable by tabbing.
To fix this, detect that we set the focus proxy to be a descendent of
the compound widget, and then move the compound widget directly in front
of its first child in the focus chain. This way we can't have any gaps
in the focus chain.
Augment the test case with a corresponding scenario. As a drive-by, move
the debug helper up in the code so that it can be easier used, and set
object names on relevant widgets.
Pick-to: 6.4 6.2 5.15
Fixes: QTBUG-89156
Change-Id: I17057719a90f59629087afbd1d2ca58c1aa1d8f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If we use winrt's factories we have to make sure to to clear the factory
cache when one of our dlls is unloaded or we will run into dangling
factory entries which might result in crashes. So we have to make sure
that winrt::clear_factory_cache is called on every dll unload.
In order not to increase compile times and dependencies too much
qfactorycacheregistration_p.h needs to be included in Qt code whenever
we use winrt's factory cache. A rule of thumb being: Include
qfactorycacheregistration_p.h whenever including winrt/base.h.
Other Qt modules which use winrt's factories need to be updated too.
Fixes: QTBUG-103611
Pick-to: 6.2 6.4
Change-Id: I7ab24e4b18bffaca653c5b7f56a66ce99212e339
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QHoverEvent ctor takes two points: pos and globalPos; pos is then
passed as both the scene and global pos to the QSinglePointEvent ctor,
which calls QMutableEventPoint::setScenePosition() on the persistent
QEventPoint instance and then detaches befeore setting ephemeral state.
Therefore, we must construct QHoverEvent with scene position first, not
local position, so that the right value is persisted; it's better to set
local position after the detach(), whereas it's too late to fix the
persistent point then.
Pick-to: 6.4
Fixes: QTBUG-106918
Change-Id: I45726a9ec05bba2fe0cde6f5fb87c269105caca6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
None of these users require C++20 constexpr or C++23 noexcept, the
only remaining difference between std::exchange and qExchange.
This leaves a single qExchange() user, in QScopedValueRollback, that
requires the constexpr version, only available from C++20, and thus
remains unported.
Task-number: QTBUG-99313
Change-Id: Iea46f6ed61d6bd8a5b2fd9d9ec4d70c980b443a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
focusProxyAndInputMethods tests focus acquisition and inheritance with
a toplevel widget, acting as a focus proxy for a child.
X11 window managers are set to be bypassed, programmatic focus is set
with QApplicationPrivate::setActiveWindow().
The test is flaky on Linux/XCB, and therefore blacklisted on most
Linuxes.
This patch removes focusProxyAndInputMethods, considering that
- focus proxying is tested in tst_QWidget::focusProxy()
- window activation and focus inheritance are tested in
tst_QWindow::isActive()
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I510fd935399d9ad0b6cd76f1bd5db0811e0702f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The function is used the internal window activation machinery and
should not be called by user code.
Many tests still use this function, and should be ported over to
QWidget::activateWindow(). For now they are using the private
helper in QApplicationPrivate, so that we can progress with the
public API deprecation.
Change-Id: I29f1575acf9efdcbae4c005ee9b2eb1bb0c8e5b5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
