The macOS and iOS version bumps were already proposed, and bumping
up tvOS and watchOS by one version since all original devices that
ran tvOS 9 and watchOS 1 can run the latest versions and given
the upgrade cycles and TP status of these platforms in 5.8, there
is not much point supporting any older version.
Change-Id: Ib01035054291f5bcd18d15a4f27ad33922076851
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This warning does not make sense. it seems to trigger when in code like
the following in template functions:
auto x = 1, y = 2;
3373: nonstandard use of "auto" to both deduce the type from an
initializer and to announce a trailing return type
Other reports on the Internet indicate that no one understands what
triggers this warning and have just worked around it. Additionally, the
same warning exists on other compilers with the same text, so it's
likely come from the EDG front-end. This has been reported to Intel.
Change-Id: I73fa1e59a4844c43a109fffd148d45065ab69eff
Intel-Issue-ID: 6000164202
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Actually enables headerpad_max_install_names in the darwin-g++ mkspec
as previously it was (presumably accidentally) cleared.
Change-Id: I4b2e5a0dcf38658cfe35bc0e5f24769c80f4d877
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
I added this sometime in the past to work around some ICC bug in
position-independent code. Modern versions don't have the bug.
Change-Id: I42e7ef1a481840699a8dffff140049ce927cdff2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
See https://software.intel.com/node/522852. There are options to turn
off LTCG and, on Linux, to enable/disable fat objects.
Change-Id: I42e7ef1a481840699a8dffff14003db5a9c95b83
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Prefer -std=gnu++11 unless strict_c++11 is defined. You can enable
strict C++11/C++14 mode by using
CONFIG += strict_c++
That is enabled for Qt's own code, so we we don't accidentally use GNU
extensions in portable code.
There's no support for strict C++98 mode (that is, the -ansi option).
[ChangeLog][qmake] By default, GNU extensions are now enabled with
Clang, GCC and ICC even in C++11 and C++14 modes. To disable the GNU
extensions, add to your .pro file: CONFIG += strict_c++.
Change-Id: Ib056b47dde3341ef9a52ffff13ef14de2169bef5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Apple uses __OSX_AVAILABLE_STARTING in enum values too, which ICC
doesn't like. We need to force at least OS X 10.9 so we don't run into
build errors.
FSEvents.h(279): error: expected a "}"
kFSEventStreamCreateFlagMarkSelf __OSX_AVAILABLE_STARTING(__MAC_10_9, __IPHONE_7_0) = 0x00000020
^
Intel issue ID: 6000071924
Change-Id: Iae1abb8e8e92f228571c5064d96e9d33d3e35173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
10.6 is no longer supported.
Change-Id: I4c799ba2a9622aa1dd8a79ff70608b50b2bbd26a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is done by defining QMAKE_LFLAGS_RPATH for compilers for Apple platform.
Task-number: QTBUG-31814
Change-Id: I9040df341ad46395d6ab71bc760ba7a5ee5ff291
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
GCC currently requires fat object files for static libraries, since the
linker would otherwise not load the .o file from the archive at all and
the linking would fail with a lot of undefined references. Clang on
Linux also needs this, but it has no equivalent flag, so enabling LTCG
for Clang on static libraries will result in linker error.
This commit does not add support for enabling it in configure. It can be
enabled on a per-project basis by doing CONFIG += ltcg or by passing
-config ltcg to qmake's command-line.
Change-Id: I52cf99f1ed9f1701e23a3b457ba3502fd28126ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
ICC does support C++11, but the Apple headers contain invalid code that
Clang seems to accept. In C++11 mode, code using CF_ENUM expands to:
typedef enum EnumName : CFIndex EnumName; enum EnumName {
Which is valid Objective C++, but not valid C++.
Bug reports to Intel and to Apple are pending.
Discussed-on: https://groups.google.com/a/isocpp.org/d/msg/std-discussion/yDfkDo6C0BM/EVWzwjVbyh4J
Change-Id: I7d501e94212a90f5c7197a3b56016dadac2c44ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The -xXXXX options are deprecated, so use the GCC-style -mXXX options.
Change-Id: I235c73c4a170003b5b5e20bd4c4c7125107f7f82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move it from bootstrap.pro into qt_module.prf so it will apply to any
other bootstrapped libraries, like libQmlDevTools.
Variable called "SPLIT_SECTIONS" because -fdata-sections could be added
in the future, if it proves to be a benefit.
Change-Id: I3fbb004f111620a84e58e9112e9bce3afd95631e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
ICC 8 and 9 are positively ancient. I doubt anyone is using them for
Qt, let alone Qt 5. ICC 11 through 13 haven't supported OS X.
ICC now masquerades as Clang, so we need to let qmake and
qcompilerdetection.h know about it.
Change-Id: If0d2bd8b6a4a45250c15c9472c062effc76f17de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace all tabs with proper space characters and consistently align
the '=' characters. The default alignment for the '=' of 25 characters
has been left as is to get a minimal diff. Lines with the '=' further
to the right and those belonging to 'proper code (TM)' have not been
touched.
The work was mostly done using the following python script (might
come in handy again...):
import sys, re
indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character
p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)')
for fn in sys.argv[1:]:
with open(fn, 'r+') as f:
lines = []
nl_count = 0
continuity_indent = None
for l in f:
m = p.match(l)
nl = l
if m:
n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1))
if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0:
n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4
n_spaces = max(1, n_spaces) # we want at least one space before '='/'+='
nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n'
continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$'
elif continuity_indent:
nl = ' '*continuity_indent + l.lstrip()
if l[-2] != '\\': # check when to stop the continuation
continuity_indent = None
elif l.startswith('#'):
nl = l.expandtabs(2)
if l != nl:
nl_count += 1
lines.append(nl)
if nl_count > 0:
print fn, nl_count, len(lines)
f.seek(0)
f.writelines(lines)
f.truncate()
Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a step towards making mac a shared scope for both Mac OS X and
iOS, while macx is Mac OS X specific and ios is iOS specific.
We'll then move iOS to not include macx.conf, once we make the change
to not have iOS imply macx.
Change-Id: Ic9ce4d597873aa3cf2c981598354733e07db644d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
on the way to eliminate scoping based on the spec.
gcc and msvc go as such into CONFIG, the other ones get the vendor
prefixed, as most are mostly unknown and thus likely to clash with
users' flags.
Change-Id: Ie622f53d90e96dbf05ce7d8c638cd355f04fa20c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
"CONFIG += qt warn_on release link_prl" is in every single spec (though
for link_prl there is one genuine exception and two apparent omissions).
Change-Id: I72e1e315586af828eefa3b0b70998ab892ec3c1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason whatsoever to duplicate this so many times, and even
less reason to have specs with a deviating default.
Change-Id: Ia25836c079580adebc373697b8bd03598f79c69b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
not strictly necessary, but nicer.
QMAKE_PLATFORM (and thus CONFIG) now also contains the name of the OS, and
its family (if applicable, e.g., bsd). this also adds more feature search
paths.
Change-Id: I3ab971e6e3b2b32cae53b95e4bc67a86688bc5cb
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Remove all [PPC|PPC64|X86|x86_64] CFLAGS, CXXFLAGS
and OBJECTIVE_CFLAGS. Delete the arch prf files.
32/64 bit arch selection will be made using a different
mechanism in Qt 5. Universal builds are not supported.
Change-Id: I4664f2c31801cec7fb4d240f41c2c5204a109020
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
