Commit Graph

154 Commits

Author SHA1 Message Date
José Millán Soto
8bed283f13 Correct accessibility index handling in QListView
QListView::currentChanged and QListView::selectionChanged changed to
use 0-based indexes instead of 1-based indexes.

Change-Id: Ie618970c9a37ec76156dbfab2e86685c3c8f374c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
2012-10-19 00:44:54 +02:00
Marc Mutz
a4ffbfefe7 normalise signal/slot signatures [QtNetwork tests]
Change-Id: I2491cfe421a811d00759224da03580b3dcc2a091
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
2012-10-19 00:44:54 +02:00
Gabriel de Dietrich
92e4ec7a14 Bring back Mac dependent code in QBoxLayout, QGridLayout
We also made an accessibility auto-test more stable, so that it would
not be influenced by this patch.

Task-number: QTCREATORBUG-7966
Change-Id: I6ce4e2361c8847aee5dd1cf5664c29cd2d83e38d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
2012-10-18 15:19:48 +02:00
Rohan McGovern
bfbeaffda8 Fix compile with -no-widgets
Remove more unnecessary references to QtWidgets in accessibility
implementation.

Disable accessibility tests (which rely on QtWidgets) when QtWidgets is
not available.

Change-Id: I57315537779d31af1245d42d1b4c49174016da54
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
2012-10-18 12:24:11 +02:00
Frederik Gladhorn
5fb7d6240b Mark linux accessibility test as insignificant.
The test was not run so far and chances are that it would block
the CI completely.
So disable it for now, enable it again as soon as breakages have been fixed.

Change-Id: I452c02027b37a604eefbadb253c9a4d5041ef159
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
2012-10-16 15:29:15 +02:00
Janne Anttila
cae1eeafff Mark tst_networkselftest as an insignificant.
The ftpProxyServer test case is failing constantly in Digia hosted
Qt-Project CI system, especially on Windows machines. Because this
failing autotest is blocking the use of Digia hosted CI system,
it is marked as an insignificant for now.

There is a bug report QTBUG-27571 created to fix the problem.

Change-Id: I196ad76823874dbc85b1f5abbaf020e02b3c410e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
2012-10-16 06:48:06 +02:00
Friedemann Kleint
d738595d71 Stabilize Accessibility/Combo test.
The Windows combo animation causes a delay, introduce
QTRY_VERIFY. Fix warnings about being unable to
set geometry on Windows.

Change-Id: I52ca960c06f023ade3afe85f31deaf8e32edff26
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
2012-10-13 05:51:19 +02:00
Konstantin Ritt
4717d36c91 Fix QTextBoundaryFinder usage cases in QAccessible2
Make the implementation safer and closer to what
http://www.linuxfoundation.org/collaborate/workgroups/accessibility/ia2/ia2_implementation_guide#boundaries
requires us to do.

Change-Id: I00af4697e52a9b6e7f5d7b3f403b29126fa1517b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
2012-10-13 03:17:39 +02:00
Leonard Lee
679a4e98c7 Fix #if 0 usage in collections autotest.
Removed inappropriate use of #if 0 in collections autotest.

Task-number: QTBUG-22471
Change-Id: Ibf4e5fae8e671ebfd0dc5734875fcc8879b330af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-10-04 03:03:17 +02:00
Frederik Gladhorn
375f5b4424 Remove unused function.
Change-Id: Ie8eecf7e4a7475ac84a66b6055149ce92d019785
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
2012-10-03 17:34:40 +02:00
Jędrzej Nowacki
60d096ff6d QMetaType build fix with Q_NO_CURSOR and friends.
QMetaType has a way to "switch off" some types from the build.
QtMetaTypePrivate::TypeDefinition<T>::IsAvailable is defined as false
for all unaccessible types. Sadly that information was never used by
gui and widget handlers. The patch implements it.

Change-Id: Ie5835be4c88cfbbca8a4e9199e31ddfc20cae190
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jing Bai <jing.bai@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-09-27 02:37:19 +02:00
Mitch Curtis
6b6fefad48 Remove duplicate words and punctuation from documentation.
Change-Id: I5550c62d412510bc2c5acceb2cae7d2f2ef6a8d3
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
2012-09-26 04:03:20 +02:00
Sergio Ahumada
1395b81935 test: Remove QSKIP from tst_QFocusEvent::checkReason_ActiveWindow()
This test actually passes using the "xcb" platform and fails otherwise.

Second, the Jira task is misleading since it refers to
tst_QFocusEvent::checkReason_Shortcut()

Change-Id: Icab91ace8c214d958b534c5cebae900242522372
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
2012-09-22 23:40:02 +02:00
Iikka Eklund
be15856f61 Change copyrights from Nokia to Digia
Change copyrights and license headers from Nokia to Digia

Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
2012-09-22 19:20:11 +02:00
Miikka Heikkinen
ede4f5e23b Fix mapping to/from global coordinates for child/embedded windows.
QWidget's mapToGlobal() and mapFromGlobal() functions assumed that
if the widget reports it's a window or if it has no parent widget, it
must be a top level window whose coordinates are in global coordinates.
This is not true for child QWindows or embedded native windows
(QAxWidgets).

Changed the logic for mapping coordinates to use equivalent methods
from QWindow if widget has a window handle, and changed QWindow's
methods to map coordinates using native methods if window is embedded.

Also fixed newly failing accessibility autotest. The geometry related
failures there popped up because now the position of the rect returned
by accessible interface is actually correct while widget geometry still
reports position 0,0 before widget has shown up.

Task-number: QTBUG-26436
Change-Id: I658fafd0ce01eb1604ba255efeeba3073ca0189f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
2012-09-18 14:52:38 +02:00
Kai Koehne
1dd4790aee Autotests: Use qInstallMessageHandler
qInstallMsgHandler got deprecated in Qt 5.

Change-Id: Ib36983e66b3a8090b99f14e3fd4e210602a3f018
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-09-14 15:23:15 +02:00
Pekka Vuorela
5f974a4faf Avoid deprecated QTest method in unit test
Change-Id: I1d6fc84962ba29a8963f99b87cccb4af465a2935
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
2012-09-14 11:18:17 +02:00
Friedemann Kleint
37320e36cd Fix some warnings in tests.
- Unused variables
- Signed/Unsigned comparisons.

Change-Id: I0f4cc92a8366ad501d703d19c3358ac24db47270
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
2012-08-28 17:07:15 +02:00
Pekka Vuorela
2a1700f7e2 Fix accessibility unit test compilation
Change-Id: I72c931e0704175b6b48d66a6df54784bcec6860c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
2012-08-23 02:55:17 +02:00
Stephen Kelly
da64a50792 Only emit headerDataChanged for valid proxy intervals.
Modeltest asserts before the patch, and passes afterward.

Task-number: QTBUG-26515

Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
2012-08-15 15:04:11 +02:00
Jan-Arve Saether
2cb9ded6ec Implemented QAccessibleTextWidget
A new class called QAccessibleTextWidget was added.
This class should implement all methods of QAccessibleTextInterface and
QAccessibleEditableTextInterface which only need a QTextCursor, and it
defines two pure virtual methods, to obtain and set the text cursor, so
accessible implementations of widgets which use a text cursor can implement
these two methods.

QAccessibleTextEdit is now a subclass of QAccessibleTextWidget and most of
its methods were moved to QAccessibleTextWidget.

This is a forward port of ba5d7d608cc31fc63354fd74d85a1bad7780fc45 from
Qt 4.8, and is a prerequisite for forward-porting QPlainTextEdit

Change-Id: I6093c4fa7e0a77b84de779479c6074db006efec1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
2012-08-14 03:56:55 +02:00
Frederik Gladhorn
8e1ff45e74 Add Linux Accessibility Bridge
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.

Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
2012-08-14 01:40:06 +02:00
Paul Olav Tvete
3d0af143ca Revert "Move QWindowSystemInterface out of qpa."
This reverts commit 784a877d3c.

Conflicts:

	src/plugins/platforms/cocoa/qcocoawindow.mm
	src/testlib/qtestkeyboard.h
	src/testlib/qtestmouse.h
	src/testlib/qtesttouch.h

Change-Id: Iebfed179b3eb7f30e4c95edcae5a8ad6fd50330e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-08-03 00:38:09 +02:00
Paul Olav Tvete
5ac4a1304b Make tests compile without gui-private
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).

Also remove the qmake hack that adds private headers to all tests

Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
2012-08-02 17:25:37 +02:00
Thiago Macieira
672b5b7ab6 Set the Qt API level to compatibility mode in all tests.
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.

Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-08-01 15:37:46 +02:00
Friedemann Kleint
aaaf60aeab Remove usage of deprecated qWaitForWindowShown(QWidget *) method.
Remove usages from autotests with the exception of
widgets/kernel, widgets/widgets and widgets/graphicsview.

Change-Id: I917b2857ed0cd07a6b3dbcd69244f558086c6586
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
2012-07-25 17:32:21 +02:00
Stephen Kelly
cb43dec31e Split QWidgetsVariant tests into a separate testcase.
This allows building the QVariant tests without the QtWidgets module.

Change-Id: I7cd7e78a60c7bc7614ec16df1abe1e93e45d4923
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-07-23 17:47:51 +02:00
Friedemann Kleint
6ae168f8ce Tests: Replace deprecated QPixmap::grabWidget() by QWidget::grab().
Change-Id: I5018cf5dd51c1781e7f17c7d205f3f60de7945be
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
2012-07-20 16:47:11 +02:00
Friedemann Kleint
8761840397 Implement waitForWindowExposed and friends for widget windows.
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
  deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
  into setActiveWindow, waitForActive), remove most
  hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.

Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2012-07-20 09:27:28 +02:00
Jan-Arve Saether
d45bc23cd5 Relax the reqirement in which order events are delivered.
When the pushbutton is shown, it will generate both a ShowEvent and
a StateChange with active=1 (because it is a top level window).

This patch relaxes the reqirement in which order events are delivered.

Ideally the order should also relied on, but I'm not sure if that
is feasible due to differences among window managers across all
platforms.

This got provoked by codereview.qt-project.org/#change,26014

Change-Id: I96159fbb1b64f0ca8d13833d8a4c6799c655afc2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
2012-07-13 14:18:51 +02:00
Jan-Arve Saether
159b28d972 Remove clipboard operations from QAccessibleEditableTextInterface
Also, remove its subclass QAccessibleSimpleEditableTextInterface

Instead of having the subclass that implements this conveniently,
we move this behaviour over to the bridge. The bridge should
check if role() == EditableText is set, and then it should try to
support the IAccessibleEditableText interface (i.e.
it should accept the calls to replaceText(), deleteText() and
insertText()) and change the text with the following operations:
1. Query the text using QAccessibleTextInterface::text() or by
   using QAccessibleInterface::text(QAccessible::Value) as a fallback
2. Do the requested delete/insert/replace manipulation
3. Update the text with setText(QAccessible::Value, newText);

Change-Id: Iee5e41faf14351951e2bfca8c9eac970a113e878
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
2012-07-11 02:47:34 +02:00
Toby Tomkins
179d9fe7b4 Flag consistently failing tests as expected fail tests.
Task-number: QTBUG-26372
Task-number: QTBUG-26371
Task-number: QTBUG-20984

Change-Id: I7ae558243c366769cd6c587e77f862558e8053a1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-06-30 04:30:15 +02:00
Oswald Buddenhagen
6d9c545d2b Merge "Merge branch 'buildsystem'" into refs/staging/master 2012-06-20 12:38:32 +02:00
Frederik Gladhorn
8b24ed162c Accessibility: Do not automatically add controllers
While I do like the idea, it currently relies on every
QWidget having QAccessibleWidget as a11y representation.

This crashes for example when using the itemviews and
asking them for relations.

Change-Id: Ie15a78dae620eefb97c646b9e802b13bdf864650
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
2012-06-20 09:18:08 +02:00
Olivier Goffart
958aaf3770 Add qMove macro to support std::move
Change-Id: I373e07f479c11b172dab35ed7e5b62724aa50a1a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-06-20 03:17:55 +02:00
Oswald Buddenhagen
07581a87f8 remove some qmake -project boilerplate from project files
Change-Id: I5e6103db42b4fcca4ed4c2ffaec71e71e73d5b95
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:52 +02:00
Kent Hansen
2a62122682 Make "other" autotests build without widgets
Change-Id: I49e73c31b98e43259771c0e265cf13fc167c45f2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-06-07 07:24:31 +02:00
Stephen Kelly
7d28f7772c Use QPointer instead of QWeakPointer.
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.

Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-06-05 18:42:26 +02:00
Rohan McGovern
2268be8040 tst_languagechange: increased timeout on Windows
This test's runtime significantly varies on separate runs on Windows;
runtimes from 10 to 830 seconds have been observed in CI.

Increase the timeout to restore CI stability.

Task-number: QTBUG-26006
Change-Id: Iba153e65264a177d146b2f3647ec6ba529af7135
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
2012-06-04 03:07:48 +02:00
Thiago Macieira
9c5a77f0ef Make QVector compile with QT_STRICT_ITERATORS again
Move the iterator classes into QArrayTypedData and add constBegin()
and constEnd() to that class.

I also had to add an operator T*() to the strict iterators, since
there are many places that expect the iterator to behave like a
pointer (including in QVector itself).

Change-Id: Icc5ed56ad47b013664a48eef9d31b5273aecb4e3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
2012-06-01 12:27:32 +02:00
Rohan McGovern
177070cb7b Add CONFIG+=parallel_test to suspected parallel-safe tests.
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows.  Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.

Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
2012-05-28 07:33:01 +02:00
Jan-Arve Saether
018cb899d4 Replace (un)checkAction with toggleAction (3/3)
Remove all references to (un)checkAction.
This commit finalizes the intended change.

Change-Id: I79d3b30b5c3d9fbe276c2c94fed5971bb21d6c02
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
2012-05-22 20:56:38 +02:00
Konstantin Ritt
279562172d enable the text layout's cache where it is seems to be missed
e.g. in QStaticText, the data is used just to get the line's y-position
and re-calculates just after the loop to determine the bounding rect and to draw the text;

in QWidgetLineControl, the data re-calculated over and over while the result
is seems to remain the same; probably the caching is needed here too

Change-Id: I0f7eb291532f63eccb9c5f749daebb73ff90632f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
2012-05-16 19:38:01 +02:00
Kent Hansen
0e7a52b539 Revert "Temporarily disable -Woverloaded-virtual in headersclean test"
This reverts commit a17523805e56511465550a6a93a88b3fc3c8325a

The compatibility overloads were removed in change Icf108a80177155f21bb73c165fb8ab5d4e997bc2.

Change-Id: I4861f281451d66a1aa5f3525eea1773dfef0540e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-05-16 04:25:01 +02:00
Olivier Goffart
f92fdd190d Implement the move constructor for containers.
This changes all the containers that uses QtPrivate::RefCount
(QMap already had one), and QVariant

In Qt 4.8, it was pointless to have the move constructor because we did
not have quick way to re-initialize a null container. (shared_null still
needed to be refcounted)
But now that we have RefCount, and that the shared_null do not have
reference count, we can implement a fast move constructor that do not generate
code to increment the reference count.

Change-Id: I2bc3c6ae96983f08aa7b1c7cb98d44a89255160b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
2012-05-11 01:42:02 +02:00
Jędrzej Nowacki
ff3a2ab242 Fix test case dependency in tst_exceptionsafety.
Change-Id: Icb3887e8bca55a7e76b264b0a5ce8aa2dd118275
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
2012-05-10 02:39:30 +02:00
Girish Ramakrishnan
36547f4eff Expose QPA API under qpa/*
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.

As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to  treated differently from private headers since they
will be used by  in-qtbase and out-of-qtbase plugins.

This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.

This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.

The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h

files were renamed using

    for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
    for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done

includes were renamed using script

for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
    sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
        -e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
        -e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
        -e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
        -e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
        -e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
        $file
done

Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
2012-05-07 20:25:24 +02:00
Thiago Macieira
575ede308e Change remaining uses of {to,from}Ascii to {to,from}Latin1 [QtGui]
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.

Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-05-04 12:45:52 +02:00
Thiago Macieira
712ca9d95a Change remaining uses of {to,from}Ascii to {to,from}Latin1 [QtCore]
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.

Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
2012-05-04 12:45:47 +02:00
Debao Zhang
ade8888603 Don't use obsolete qVariantValue, qVariantCanConvert, etc.
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.

qVariantFromValue and qVariantSetValue are Obsolete members.

Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
2012-05-02 08:30:59 +02:00