This commit adds those three flags that are either frequent enough or
difficult to do: close all file descriptors above stderr and reset the
signal handlers. Setting SIGPIPE to be ignored isn't critical, but is
required when the ResetSignalHandlers flag is used, as this is run
after the user child process modifier.
[ChangeLog][QtCore][QProcess] Added setUnixProcessParameters() function
that can be used to modify certain settings of the child process,
without the need to provide a callback using setChildProcessModifier().
Change-Id: Icfe44ecf285a480fafe4fffd174d0d1d63840403
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is necessary to add an AccentColor role to QPalette.
QPalette currently has 21 color roles and 3 color groups, which
require 63 bits to resolve. The resolve mask is implemented with a
qint64, which doesn't provide spare bits for another color role.
The color role NoRole is used as a default value, marking that a role
has not (yet) been defined. The enum value does not represent a valid
brush, even though it can theoretically be stored in QPalette's shared
data.
This patch adds the enum value AccentColor to QPalette::ColorRole,
increasing the available color roles to 22.
To keep the resolve mask at 63 bits, AccentColor is mapped to NoRole
in static constexpr bitPosition.
As the enum range would exceed 64 bits without this tweak, 3 additional
bits are substracted in the respective static assertion.
With NoRole having no bit in the resolve mask, the following adaptions
have been implemented:
- QPalette::resolve() is adapted to explicitly ignore NoRole.
- QPalette::isBrushSet() always returns false for NoRole.
- tst_QPalette::setAllPossibleBrushes() to verify the latter
- operator== ignores NoRole (documentation updated)
AccentColor is added in tst_QPalette::roleValues and enum documentation
is adapted.
In QPalette's default constructor, the AccentColor brush is defaulting
to the Highlight brush, it this is available. Otherwise it is made 30%
darker or lighter than the Base brush, depending on dark/light mode
heuristics.
QPalette's data stram functions have been extended from QDataStream
Version Qt_6_6. If earlier versions are de-serialised, the AccentColor
defaults to Highlight. An autotest function dataStream() has been added
to tst_QPalette.
The QDataStream Version Qt_6_6 has been bumped to 21.
tst_QDataStream has been adapted to the new version and the new
color Role.
Change-Id: I98bbf9de95fb83bda921e9614a0db3a3c0ebdf75
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][QtCore][QUuid] Added support for converting between QUuid and
quint128, on platforms that offer 128-bit integer types (all 64-bit ones
supported by Qt, except MSVC).
Change-Id: Id8e48e8f498c4a029619fffd1728c9553e871df5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
While std::vector::assign() returns void, std::basic_string::assign()
returns std::basic_string&. In Qt, we want to be consistent between
{QVLA,QList,QString,QByteArray}::assign(), and returning *this is the
more general solution, so do that.
Task-number: QTBUG-106196
Task-number: QTBUG-106200
Change-Id: I2689b4af032ab6fb3f8fbcb4d825d5201ea5abeb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This removes the last use of QtPrivate::convertToMilliseconds().
Change-Id: I6f518d59e63249ddbf43fffd1759fee2e00d36f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Implemented assign() methods for QList to align with the criteria of
std::vector, addressing the previously missing functionality.
Reference:
https://en.cppreference.com/w/cpp/container/vector/assign
[ChangeLog][QtCore][QList] Added assign().
Fixes: QTBUG-106196
Change-Id: I5df8689c020dafde68d2cd7d09c769744fa8f137
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This file, like the majority of qtbase, uses a space between template
and the opening of the template argument list. Add it.
Change-Id: I927cb2b1b9620ae108e913343d995373493e8981
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Do this by making the actual child-execution code common between
startProcess() and startDetached(). It does mean we've moved the chdir()
operation from the child to the grandchild process, though.
[ChangeLog][QtCore][QProcess] The modifier function set with
setChildProcessModifier() will now also be executed when the process is
started with startDetached().
Change-Id: Icfe44ecf285a480fafe4fffd174d9aa57dd7dfff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two types of stack unwinding that can happen on Unix systems:
C++ exceptions and PThread cancellations (on some systems, like Linux,
PThread cancellations can be caught in catch(...) statements). We call a
variety of PThread cancellation functions from inside the child stub,
like close(). To avoid problems, we disable PThread cancellations
completely before fork() or vfork().
The C++ exception case is simpler, because we can be sure of catching
them with the catch (...) statement and simply transform them into an
error message. This is also testable, which the PThread cancellation
isn't.
The error message isn't ideal because we're string-frozen. I'll improve
it for 6.6.
Pick-to: 6.5
Change-Id: Icfe44ecf285a480fafe4fffd174d97a475c93ff1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is handled by the Objective-C runtime nowadays, where it will
abort if the situation is detected, with the option to break on
objc_autoreleasePoolInvalid to debug the situation.
Pick-to: 6.5
Change-Id: Idf2c4aacc77e41a3deebf270303f4f13cfb0819b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When matching the locale's correct exponent separator, QLocale was
doing a case-insensitive match; but the Cyrillic fall-back was
matching case-sensitively, so failed to catch the case of lower-case e
and its Cyrillic equivalent, when used in a Cyrillic font in place of
the upper-case form of the other, where that's the locale's official
separator. So make this comparison case-insensitive.
Added some test-cases for the lower-case exponential separator.
Pick-to: 6.5
Fixes: QTBUG-113443
Change-Id: I18e22d7b3451fbb61e87d5b93661eadff3c7356e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
The options included by --help-all, although they are "specific to
Qt", are "specific" to all Qt applications, so - in the present
context, of QCommandLineParser - not specific at all. It's the options
described by -h that are specific, to the present command; the Qt
options are generic (in the present context).
So rework the help string for --help-all itself and the documentation
of the function. It had, in any case, an overly-complex first line,
that descended into too much detail. Updated test to match.
Pick-to: 6.5
Task-number: QTBUG-111228
Change-Id: I06da0af41be60e6e1b7616984001ddb9ca33aad6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
tst_QDate::startOfDay_endOfDay() and its _data() were in danger of
growing a lot of ugly #if-ery to work round the known limitations of
MS's time-zone API and the backend built on them. Replace the #if-ery
with a flags enum indicating which parts we need to ignore on MS and
limit the #if-ery to how those flags get exercised.
Change-Id: I8657b4fba75f1aef1f3f9374e05f60354dc25e34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There's no need to say it's getting skipped on Windows. moc *can* parse
the #ifdefs these days.
Pick-to: 6.5
Change-Id: Icfe44ecf285a480fafe4fffd174d95c709ff6a74
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The parameter passed to reserve() is just a hint. The container
implementation is free to choose a larger capacity, and some do
(e.g. QList in prepend optimization mode).
Fix the test by querying the container for its post-make<>()
capacity() and taking a larger-than-expected initial capacity() into
account when later re-checking the capacity().
Change-Id: Id8f26f14e8df9d685ca2387ec4a52d74fea7cb9d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It took me a sec to figure out the relation between the comment and
the code line following it. Make it easier for the next guy and add a
bit more infos.
Amends 7cbdc8abbd.
Change-Id: I4ff2d9a52aef643a92339df32cc86f686a689a9a
Reviewed-by: Dennis Oberst <dennis.oberst@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We use a single line per test slot everywhere else, ignoring even
line-length limitations, to keep the function names aligned for easier
parsing.
Amends 7cbdc8abbd.
Change-Id: Iaf2941aae88392d407d688fc4a7537fcdc0a5851
Reviewed-by: Dennis Oberst <dennis.oberst@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
STL algorithms, in general, don't specify how often the function
objects passed to them are copied during the run of the
algorithm.
While generate_n is above any reasonable suspicion of copying the
function object after the first invocation, passing a mutable lambda
containing the counter is still an anti-pattern we don't want people
to copy.
Fix in the usual way, by keeping the counter external to the lambda.
As a drive-by, replace post- with pre-increment.
Amends dc091e7443.
Pick-to: 6.5 6.2
Change-Id: I9c44e769fd41e5f7157179a2be4c3534424cf913
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This places the first through third parameters on the exact positions
that they will be used to perform the operations in the switch, saving
the compiler from generating a few instructions to move data around. All
ABIs Qt supports that pass any function parameters in registers at all
pass at least 4.
We keep the return type as void (instead of returning bool, for the
Compare case) so the compiler can apply tail-call optimizations for
those two typical cases.
PMF case: https://gcc.godbolt.org/z/9oP5boKfj
Function case: https://gcc.godbolt.org/z/e9vEzd5dj
Functor case: https://gcc.godbolt.org/z/s8Ejjra7P
Change-Id: I3e3bfef633af4130a03afffd175d3e3009c56323
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 3bf5b5f894, after which free
functions and std::bind could no longer be used as callables in
QMetaMethod::invokeMethod.
For free functions to work we need to decay to function pointers when
choosing what type QtPrivate::Callable aliases.
And std::bind has operator() overloads and the return type cannot be
deduced. So simplify the definition of the ZeroArgFunctor - we know
the function prototype if we know the return type.
Add testcase for calling std::bind and free function, and remove the
now unneeded helpers for functor argument and return type deduction.
Change-Id: I54aac5cb6d660267e6b2f5ab05d583e8826cdf9a
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A zone without transitions, such as any UTC-based one, would
previously return invalid data for the offset data at a given
time. The method was documented to be "the equivalent of calling
offsetFromUtc(), abbreviation(), etc" but these methods do return
sensible data for a zone with no transitions. Furthermore, the backend
data() method on which it depends is implemented by all backends,
including the UTC one, with no transitions.
Fix offsetData() to also return data when no transitions are
available. Improve docs.
Adapt the checkOffset() test to test offsetData() as well as the
various functions to get parts of it. In the process, change that test
to use a QTimeZone row instead of its name as a QByteArray, so that we
can also have rows for lightweight time representations.
Change-Id: I241ecf02a26a228cca972bca5e2db687fe41feb4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Some zones that fell into one or another of the supported groups had
different start times or even dates for their transitions, causing the
tests to fail in those zones. Adapt the test data to them.
In the process, arrange for part of the test to report more: verifying
a value is 1 or -1 sadly leaves no report of what it was when it
wasn't. So use the scope-guard report pattern to do that on failure.
Change-Id: I01cc4a90e3b45867ba0edb2d6c46397d465046ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTimeZone is no longer dependent on feature timezone, only its
backends are. We can also pass it as test data, rather than only its
name. So replace the zoneName column with a plain zone column, make
the UTC row for the epoch use QTimeZone::UTC instead of "UTC" and make
only the remaining rows depend on the feature, and then only for their
test using the backend zone.
The test itself was doing some convoluted twists to check local time
handled the relevant dates and times as expected. Where local time is
the zone the test relates to, this can just as well be handled by
adding a separate row for it - which we can even do without feature
timezone.
Otherwise, testing an expectation that local time *doesn't* have
anything odd going on for the selected days was somewhat unreliable,
as other zones that coincide with the tested zone for that particular
date would fail. So just drop that unreliable side of the local-time
testing.
Change-Id: Id58b2d4cf7649567f1831154a605f31139e987d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows up on commit ca4aa06523
with a correction to the start of day, which should of course be
01:00, not invalid.
Unsurprisingly, the MS backend doesn't know anything about that, so
gets this wrong; kludge round it. In the process, adapt the kludge to
the Sofia test-case to work the same way.
Change-Id: If18e6d005783a0854c56092e695177898ec61712
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QWeakPointer conversion SMFs cannot actually be used for QObject
payloads, as, for unknown reasons (some comment about vtable this
author doesn't understand), conversion goes through QSharedPointer,
the creation of which throws the checkQObjectShared() warning and
yields a nullptr.
We need to continue to use the QWeakPointer(T*, bool) constructor the
QPointer(T*) ctor also uses.
It's high time we dissociated QPointer from QWeakPointer...
Amends 5f28d367d9.
Fixes: QTBUG-112464
Change-Id: I2f93843af3daf02323d77a4259eaa3745d8de3a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have quite a few Qt API that assumes this, so making this change
helps transitioning them to QDeadlineTimer.
[ChangeLog][Important Behavior Changes] QDeadlineTimer will now
interpret negative millisecond remaining times as "forever", instead of
only the value -1. This brings the API closer in line with other API
like QMutex. This change does not apply to the nanosecond counts in the
API, nor to the API based on std::chrono.
Change-Id: I6f518d59e63249ddbf43fffd175a3e5bead564ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Commit b498e1ae3a removed the last
distinction. And since there was no distinction, the code that was
previously under a conditional for CoarseTimer must work for precise
too.
Change-Id: I6f518d59e63249ddbf43fffd175a3eddbd41611a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add some tests inspired by the initial form of a bug report (before we
found out what the real issue was), that a small fraction with a large
exponent is correctly handled. This should work as long as the result
is representable, even if the fraction itself is too small to be
represented by the floating-point type.
Pick-to: 6.5
Task-number: QTBUG-113443
Change-Id: Ie004197961fc7b603e5024a6ebc5928261a0e2bb
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
After the recent changes we only have a single implementation of
QSlotObjectBase, which can handle free functions, member functions,
functors, and lambdas. Rename it to callable, and explicitly hide
the static implementation function so that it doesn't become a symbol
of static libraries using Qt.
Also rename makeSlotObject to makeCallableObject, and polish coding
style and comments in the qobjectdefs_impl header a bit.
Change-Id: Id19107cedfe9c624f807cd8089beb80e9eb99f50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to the Freedesktop spec[1], a mimetype that has glob-deleteall
overwrites other glob-pattern definitions for a mimetype if it is in a
higher precedence dir, the default order is (from high to low)
~/.local/share/mime, /usr/local/share/mime, /usr/share/mime. Or if the
XDG_DATA_DIRS env var is set, then it takes precedence. The
QMime*ProviderS in m_providers are constructed/stored in that same
order, high to low).
For QMimeXMLProvider, we can just clear the glob patterns associated
with those mimetypes from the lists/maps. For the QMimeBinaryProvider
however, we can't change the binary (mmap'ed) cache file, instead check
mimetype names against the exclusion list before modifying a
QMimeGlobMatchResult.
[1] https://specifications.freedesktop.org/shared-mime-info-spec/latest/ar01s02.html
This test uses XDG_DATA_DIRS so only viable when USE_XDG_DATA_DIRS is
defined.
Fixes: QTBUG-101755
Pick-to: 6.5
Change-Id: Icadbdf1027155296377c5a6ab3be8e41b6668325
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QDebug] Added pretty formatting of C++ <chrono>
durations.
[ChangeLog][QtTest] Added pretty formatting of C++ <chrono> durations
for QCOMPARE expressions.
Change-Id: I3b169860d8bd41e9be6bfffd1757cc087ba957fa
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since we don't have different environment variables for the plugin paths,
users have to set QT_PLUGIN_PATH to where plugins for both Qt 5 and 6
(and future versions) are located. This causes Qt to print warnings that
those couldn't be loaded because the major version mismatches. So don't
print them any more.
QT_DEBUG_PLUGINS and the category logging filter can still be used to
enable them.
Fixes: QTBUG-107459
Pick-to: 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd175318ca1f8017bd
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Add helper that allows us to determine the argument list and return type
of a functor. This triggers a compile time error if the functor has
operator()() overloads (we only support zero-argument call operators, but
there might be const/noexcept variations). Use that helper to declare a
ZeroArgFunctor type which also declares a ReturnType and Arguments alias.
Add a Callable alias that now combines FunctionPointer and ZeroArgFunctor
into a single type that we can then use to merge the specializations of
QMetaObject::invokeMethod.
[ChangeLog][Potentially source-incompatible changes] Using a functor
with several operator() overloads in QMetaObject::invokeMethod now causes
a compile time error. Qt would previously ignore const and noexcept
overloads and always call the mutable version on a copy of the functor.
Change-Id: I3eb62c1128014b729575540deab615469290daeb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We never copy the function so only need it to movable. Moves the
functions to templates using the new QRunnable create version.
[ChangeLog][QtCore][QThreadPool] Methods taking callable functions,
can now take move-only lambdas.
Fixes: QTBUG-112302
Change-Id: I2cb200f0abcf7e0fdbef0457fe2a6176764ad93d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It turns out glibc stops varying DST changes past where a 32-bit
signed day-count from 1970 reaches (which, all things considered, can
hardly be called a bug, for all that it's ...), at odds with QTZ's
extrapolations from the current IANA DB rules. As the last date QDT
can represent happens to be in the opposite side of everyone's DST
from the one that leaves zones in, this lead to the 2038
local-time-type not reliably being useful for predicting the max-date
behavior. So add a distant-future time-type that probes beyond glibc's
cut-off, and have relevant tests check that instead of the 2038 one.
Change-Id: If4e244d80fe2447da3bb9d5c406808c6c22c0a73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no need to check the year or day-of-month (which involve
calendrical calculations) when we can perfectly well just check the
Julian Day number that's implied by the day-number parameters to
setType(), which could just as well return the LocalTimeType to be
assigned to the relevant parameter instead of doing the setting
itself. With that rearrangement, making it into a private static
method, the members it's used to initialize can then be const and
initialized during construction.
Change-Id: Ib7d295c3fbb9b90652952627456cdfb6176b8119
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's a private static used to optimize internal use, so we can freely
get rid of its out parameter this way.
Change-Id: Id62612987f10ecbbd9702610fd172286adbfd442
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 642f799fc6 to avoid unnecessary
copies in between the calls to the QFunctorSlotObject construcotr. We
can't use a univeral reference in the QFunctorSlotObject constructor
as the call is not deduced. So provide two overloads for lvalue and
rvalue references instead.
The compile check in the test now no longer fails as we delay the
storage until one level later, but that's acceptable.
Change-Id: Ide95b4a73c70f6f47698dd1e95138aa5d48ee95d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove duplicate test and outdated comment about move-only functors,
and include return value in move-only functor test.
Change-Id: I58dffe0ccf3ec12e7e05e2c9588303da4a7e75ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Making them static constexpr class constants is tidier than
duplicating them in diverse tests.
Change-Id: I5a24c10d6db6f946581fa0523d28bdc80358e95e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The second pass through each test case, going via UTC, applied an
adjustment to the time; however QTime wraps around modulo the day, so
applying a negative adjustment to a time too near the start of the day
could produce a time at the end of the day. I'm preparing to add some
test-case variants for which the transition's UTC date differs from
the date in the zone doing it, which trigger this. Combine the time
with the date before applying the adjustment, so that the date gets
decremented to match the time's wrap-around and conversion from UTC
duly gets back to the correct place, not a day later. The new test
cases (in an imminent commit) thus pass.
Change-Id: I1bd5f191c7673a56ac3fbfc69eab0bc03c9e40b3
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
It seems glibc's extrapolation of existing DST-rules cuts off at some
point in the distant future, where the IANA DB gives no end-time for
such rules, leading QTimeZone to keep applying them. This lead to
tst_QDateTime::fromSecsSinceEpoch() not getting an invalid date in one
of its bounds-probing tests, due to a within-bounds datetime getting
glibc's offset and then the out-of-bounds one falling back to the IANA
rule's offset that put it back within the bounds.
This directly affected Australasian zones (which glibc locks into
daylight-saving time in this distant future) which were fixed by using
the IANA DB's offset; but the relevant date is in August so other
zones, north of the equator, that glibc locks into standard time, then
had the reverse problem, so we have to take the minimum of the two
sources' offsets to get all zones on board.
Change-Id: I0c94af2ba108dea31bee46aafa4a8cca8d373a5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Amend 3c6e9dcc623c9d7281a81174bb3a696e030f30a7 by making sure that
we explicitly move move-only functors into the slot object in the
respective tests, and that failing to do so doesn't compile.
Also add test coverage for mutable lambdas, which work as they do
with connected functors: the connection stores a copy, and calls
don't modify the original functor.
Change-Id: I637e6f407133e2f8f72109b3fe5369a11d19da93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
