Check if QSslKey::handle() returns data representing the
same key information as that passed to the constructor.
Task-number: QTBUG-64495
Change-Id: I1a91264e6f6d92d259b51fca9de00fcbfd5cc845
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add a new signal textChanged(QString) as a replacement for
valueChanged(QString) so valueChanged(QString) can be removed with Qt6.
This removes the ambiguous valueChanged() signal and also matches the
'text' property naming.
Change-Id: I0676a7112f70add20a3a7ef9381268cd9b8a5851
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It's flaky and has been for a while. However it is somewhat more flaky
when using the docker setup.
Task-number: QTBUG-74162
Change-Id: I49f346a39271b48395e0e17fa6821d73a24f81d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Our implementation of compose table parser was added on Mar, 2013.
libxkbcommon added APIs for the same thing in Oct, 2014 (ver: 0.5.0).
After removing RHEL 6.6 from the list of supported platforms we were
able to move the minimal required libxkbcommon version to 0.5.0. Now
we can use the xkbcommon-compose APIs on all supported platforms.
With this patch we can drop nearly 1000 lines of maintenance burden.
This patch fixes user reported issues with our implementation.
Known issues:
- Testing revealed that xkbcommon-compose does not support non-utf8 locales,
and that is by design - https://github.com/xkbcommon/libxkbcommon/issues/76
Our implementation did work for those locales too, but it is unclear
if anyone actually uses non-utf8 locales. It is a corner case (work-arounds
existing) and likely a configuration error on the users' system.
- Looking at the release notes for versions above 0.6.1, only one issue
that stands out. Compose input does not work on system with tr_TR.UTF-8
locale, fixed in 0.7.1. Compose input works fine when using e.g. en_US.UTF-8
locale with Turkish keyboard layout.
Note:
With Qt 5.13 we have removed Ubuntu 16.04 and openSUSE 42.3 from CI:
Ubuntu 16.04 - 0.5.0
openSUSE 42.3 - 0.6.1
CI for Qt 5.13 has:
Ubuntu 18.04 - 0.8.0
RHEL-7.4 - 0.7.1
openSUSE 15.0 - 0.8.1
Currently the minimal required libxkbcommon version in src/gui/configure.json
is set to 0.5.0, but we could bump it to 0.7.1 to avoid known issues from above,
but that is a decision for a separate patch.
[ChangeLog][plugins][platforminputcontexts] Now using libxkbcommon-compose
APIs for compose key input, instead of Qt's own implementation.
Fixes: QTBUG-42181
Fixes: QTBUG-53663
Fixes: QTBUG-48657
Change-Id: I79aafe2bc601293844066e7e5f5eddd3719c6bba
Reviewed-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
To work with docker test server.
Change-Id: I50a1c7b632748d7648dafd70356aa849614e4e12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: Id456fa8ea6ab4f23b6b83c5f6388e96443ccf9e0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The iptables container launches with extra capabilities to actually be
able to make changes to the tables.
Change-Id: I892fd18853ce882709e21791e6c88217e5029d53
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QListView::setSelection() algorithm is designed for items to
occupy their cells completely, which is not the case when
itemAlignment is used. The middle part of the selection rect
goes beyond the column borders and extra items are selected.
Use the introduced cellRectForIndex() instead of rectForIndex()
to calculate the middle part correctly.
Fixes: QTBUG-73684
Change-Id: I4a1e42a056d56e85a16d8ae0ffe18b78d1d6deb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The standard astc encoder has its own file format.
Change-Id: I9a2f7b1fa20ba344b79637bafb50ff2bd0596747
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Regular update in preparation for 5.13, adding tests for additions
since 5.9.4/5.10.1/5.11.0's update 7e946030 (the last to record its
upstream version sha1). Corrected the license header: it's now
published under MPL 2.0 (not 1.1); and our secondary licensing of it
is as LGPL3. Deferred full header over-haul until we've worked one
out in detail.
[ChangeLog][Third-Party Code] Updated DNS public suffix list
Task-number: QTBUG-72623
Change-Id: Iabdbbbfd79624830396c2a6fe0a73389bd6ce5b7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new test tst_QTouchEvent::touchOnMultipleTouchscreens()
needs the touchpoint IDs to be predictable, but another test currently
has a QEXPECT_FAIL; without release events, g_pointIdMap continued to
hold the touchpoints that were there when the test failed. So it's
necessary to add QWindowSystemInterfacePrivate::clearPointIdMap()
to be able to call it in the test cleanup function.
Fixes: QTBUG-73830
Change-Id: Ia6a70d028be95cd2b6676db6363ec408c0b116bc
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
With a QTreeView it is possible that collapsing an item can cause the
item under the mouse to be a new one and over the checkbox area for the
new item. As a result, a release can cause it to change the check state
even though it did not get the press for that item. This ensures that
it only allows the edit if it got the press as well.
Fixes: QTBUG-61476
Change-Id: I9a0821466afc84c97c9819755ccbacd729f7fbd7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This commit adds support for single-sign-on SPNEGO/Negotiate
authentication to QAuthenticator, using SSPI on Windows and GSSAPI on
other platforms (if KRB5 GSSAPI is available).
[ChangeLog][QtNetwork][QAuthenticator] Add support for SPNEGO/Negotiate
Task-number: QTBUG-4117
Change-Id: Ie246b887db3fd6201b7ed30b023feca292cd6530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace QGraphicsItemAnimation::matrixAt(qreal) with transformAt(qreal)
to avoid the usage of QMatrix which is deprecated.
Change-Id: Iafcdf8b9b2fbffffa61417601a3ae4272d0176c6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We can parse the namespaces in order to find the enums in them and
populate the related metaobjects of the current file's classes. The
symbol clashes are avoided by only generating metaobjects for namespaces
defined in the same file.
Fixes: QTBUG-71966
Fixes: QTBUG-72069
Change-Id: Ibdf21c3f9dae48d95b0952b3e220b4c29e30ecb8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
and make it work with our new docker-based test server
Change-Id: I98b5b5b1e2cdca46b7f15be72aa1483d9455403d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to removal of insignificant flag in
tst_qfilesystemmode.pro a bunch of tests will
either fail or crash in different operating systems.
Task-number: QTBUG-70572
Task-number: QTBUG-70573
Task-number: QTBUG-29403
Change-Id: I44925187acd72e600d2fec4f2604b67c66ecdd6b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
A widget being added to QMdiArea which currently has focus
did not trigger the subWindowActivated() signal
since the connection to the method _q_processWindowStateChanged, which
emits the signal (set up in appendChild()), was just done after
the focus was set back again to the added widget.
Setting the focus makes the widget active.
This patch changes the order: first call appendChild(), then set focus
Change-Id: I3aaf1728dc082d1323c7fbd62bfdbd2af87ab2ce
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
1. Fix erroneous logic, which was triggered in 'h2' mode (non-TLS connection)
- after the initial protocol upgrade/POST request was handled, the server
(on Windows specifically) was erroneously handling upcoming DATA frames by replying
with another redirect response.
2. Make the test less heavy by sending 1 MB of Qt::Uninitialize instead of 10 MB
- theoretically this could cause a timeout before the redirected request finished
successfully.
Task-number: QTBUG-73873
Change-Id: I961e0a5f50252988edd46d0e73baf96ee22eef3f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
One of the tests was not added to the parent subdirectory pro so this
is also rectified.
Change-Id: I270f1c2882260e3e3fac83d074ed6444c5dece19
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In 3ccdeb4b58, we removed the
specialized multi font engine on Windows, causing us to go
through the same code path when loading fallbacks as on
other platforms.
When combined with 97f73e9577,
this caused an error, because the code in
QFontEngineMulti::loadEngine() only overrode the families
list, but not the singular family in the request. In the
QRawFont test, this would cause the requested fallback font
to correctly have "MS Shell Dlg2" as the only font in the
families list, but the request.family would still be
"QtBidiTestFont", the name of the main font. The singular family
in the request was preferred by the windows font database when
creating the LOGFONT. We would therefore load the latter for
the fallback as well and since it still does not support the
characters in question, we would continue searching.
Fixes: QTBUG-72836
Change-Id: I1787b57febcf6030d5c5b09bc2ef2c9558f05beb
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
As winrt does not have native windows, exposure check was just done by
checking, whether the window is the active window. If a window is shown
fullscreen though, winrtscreen will be resized. This resize triggers a
resize of every maximized or fullscreen window that is shown.
If we enter or leave full screen mode, we have to wait until the screen
resize and the subsequent window resizes are done and only then we can
consider the windows properly exposed.
This patch reverts 54bcb9d42f and thus
unblacklists tst_QGraphicsItem::cursor on WinRT.
Fixes: QTBUG-73545
Change-Id: If469fce319ed6b3a5d56b7bf3cbc11929b72bb11
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Prevent automatic insertion of line-breaks in blocks formatted with 'white-space:nowrap'.
This follows the example of white-space:pre.
Fixes: QTBUG-54787
Change-Id: If26f6a54106a02fe0e388947f6368ae4e86acf63
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some QSpinBox tests start failing after reverting to using legacy mouse
messages to handle mouse input in the Windows QPA. It seems to be caused
by a test that runs before it and moves the mouse cursor. Then when the
QSpinBox tests run, they create widgets that appear below the mouse
cursor, causing some mouse events to be generating and messing with the
events synthesized by the test itself. With the pointer messages being
used for mouse input, the legacy mouse messages that are generated under
this condition were being ignored. But by reverting to the old
implementation, the legacy messages are handled again, causing the test
to fail. This change moves the mouse pointer to a safe position during
the test initialization, so it does not depend on the state left by
previous tests. This change needs to be integrated together or before
the change in the windows QPA.
Change-Id: I91f7e9376dc495ee61250e0a7d908c1c2b685bc8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QFileDialog::setConfirmOverwrite()/confirmOverwrite()
- QFileDialog::setReadOnly()/isReadOnly()
Change-Id: I3cc1df76c8e40e95b8e9893ae06ef488fad26fb6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a modal dialog is called from a slot connected to the
editingFinished signal, the chain of events resulting from the focus
returning to this widget will make the editingFinished signal emitted
again. This patch uses a new variable to keep track of the fact that
there was a modification. Once editingFinished was emitted, that flag
is cleared so next time the signal will be emitted again only if a
modification was made to the line edit content.
[ChangeLog][QtWidget][QLineEdit] Behavior change: now the
editingFinished signal is emitted only once after the line edit content
was edited.
Fixes: QTBUG-40
Change-Id: Ia4760bad8717f1758c3939132c446b4b4c6cd498
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Now that MSVC (presumably) supports templates, we can merge the QRect
and QRegion versions of the functions into one.
The function has been renamed to invalidateBackingStore to better
reflect what it's doing.
Change-Id: I0e94a0cabd286cf97f2ba718a42ee0425f59d3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The silent and blacklisted selftests of testlib end in a qFatal(), to
test its messaging is handled correctly. However, this prevents hooks
in main() from saving coverage data when we're gathering that. So use
a transient signal handler that longjmp()s back to a setjmp() just
before the qFatal() to let the test complete normally (but, since
qFatal() does something different on MS-Win, don't apply this to it).
Note that testlib's internal FatalSignalHandler handles all fatal
signals *except* SIGABRT, so this isn't over-riding it. (In any case,
this restores the prior signal handler in setjmp()'s catch branch.)
Added missing expected_silent.tap test output while checking that this
change doesn't affect (the rest of) the test output.
Change-Id: I7e460581ad93e26639c066b3229438a66fd299de
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Still do a begin/end reset model in place, which is probably not the
best code but since it's a test and it works it should be enough
Change-Id: Iffaf8d69d5be64ef5e1e359e3d90a1e8174fc13b
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
to make it work with our new docker-based test server.
Change-Id: I76345a2d3d768b8a571f2c85e69f6a21e9a96d7e
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Test fails on minimal and offscreen platforms.
Task-number: QTBUG-73522
Task-number: QTQAINFRA-2630
Change-Id: I6260454be35a8bbac1ab683d89fb7b262d3b69ab
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
