Otherwise, the code:
ds >> s >> hash;
could set the stream status to ReadPastEnd, while deserialization
of the string is failed with ReadCorruptData status.
Proposed solution is to restore a previously latched error status
unconditionally in accordance with QDataStream::setStatus() docs.
Change-Id: Id3a7dccf709b02e5b018efb48d7647ee48fe5124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit 55655abfaf.
The crashes in release mode cannot be locally reproduced.
Change-Id: I4e7b1defbeac5d5512b2fa82a367d2e04e3c37a4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This reverts commit b373d183de.
The crashes in release mode cannot be locally reproduced.
Change-Id: I38ff5e9e045cff0e94e24ca07fb6e18e88b677c7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Commit 9ef3ff30 introduced a new function, putUcs4(), to
output QChar, char16_t, char32_t as a, possibly escaped,
character literal, but got the order of stream modifiers
wrong. Instead of applying the field width to the 'ucs'
streaming, it applied it to the prefix '\u'. The same
problem exists for the pad char, leading to the result
'00\ue4'
for a QChar containing
ä (LATIN SMALL LETTER A WITH DIAERESIS)
Fix by reordering the elements streamed so that the
prefixes come last.
Added a test.
Change-Id: I6eaa0586501b9e780aaa3bb5dcec0e5c2f86a219
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Limit the macro #ifdefery and allow for more test cases.
Task-number: QTBUG-53712
Change-Id: I2c185efc7c3b8fcd0217d2021bd98ab6044b5aee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test leaks a file (named qt_...xxx) in QDir::tempPath(). Moreover,
when tests fail, it can happen that more files are leaked and subsequent
runs do not recover since the check for non-existence of those files fails.
Change-Id: Iaea6d09ee7c271903a1b9c63e263c19f9e90bba9
Reviewed-by: David Faure <david.faure@kdab.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Remove every usage of the _WIN32_WCE macro outside of 3rd party
source code directories.
Change-Id: Ia7e859bd6dcaef10c66674612c8e440f9a2dee56
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Revert 6225eff73f and
a8ad67e939 as the proper fix for this is
merged.
Change-Id: I1c8db99d0efade91fbfd078f7d700c87f3848132
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
To get QtWayland in, we need to blacklist constructing_QTcpSocket test
Task-number: QTBUG-53662
Change-Id: I056547e74c7a46cf3e97f08399328ab2e684caad
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
To get QtWayland in the CI, we need to blacklist this test
Task-number: QTBUG-53665
Change-Id: I55b64a5d7f9444aa5ea73823a60c4cb9c88c31b7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Since they are non-characters and should not be used for text
interchange, it stands to reason that they should not appear in
unencoded for in a URL. To change the behavior, we just need to toggle
a simple flag for QUtf8Functions.
This behavior also matches the recommendation from RFC 3987. We do not
usually follow recommendations from that RFC (as it is generally
believed to be a bad RFC), but this one seems like a good idea.
Change-Id: Ifea6e497f11a461db432ffff1447486c623c12bd
Reviewed-by: David Faure <david.faure@kdab.com>
When the formatting parameter wasn't exactly QUrl::EncodeUnicode, it
wouldn't encode, despite having to.
Change-Id: Id75834dab9ed466e94c7ffff1444bacc08dd109b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
The RFC does allow it. It even has examples showing them as valid. In
section 6.2.3, it shows:
http://example.comhttp://example.com/http://example.com:/http://example.com:80/
Change-Id: Id75834dab9ed466e94c7ffff1444b7195ad21cab
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Before this change QFile::errorString function was returning an
"Unknown error". Now it will return the typical ENOENT string.
Task-number: QTBUG-45259
Change-Id: Ib7634f1aa5d91f77151cf92c58d3956e20a4cc6b
Reviewed-by: hjk <hjk@theqtcompany.com>
(for instance any global object which writes out to a config file in the
destructor). If the global cache isn't available anymore, don't use it.
Change-Id: I851a6e394d0b073aebf3ffd88b1966d424bfb92e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add some extra checks to the parser to make sure that addresses
like "300-05" aren't interpreted as valid IPv4 addresses.
Change-Id: I12475eebc9452e060779bb05e2b4ad9512a28281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The spawn code was only used to make QProcess work on QNX 6.5.0. Fork
works on QNX 6.6.0. The QNX spawn implementation has a flaw that causes
a deadlock in certain situations. When a working directory is specified
for the process, the QNX spawn implementation stops all threads except
the one doing the spawn so that it can temporarily change the process'
working directory. This can lead to a deadlock if the thread does
anything that conficts with something being done in a stopped thread.
QNX 6.5.0 is no longer supported in Qt 5.6.0 so we can just switch QNX
to the fork implementation and get rid of the spawn implementation.
Made a QNX specific adjustment to the hardExit test. There's a bug
in the OS that the test can run into because it does something that
normal applications wouldn't.
Task-number: QTBUG-47250
Change-Id: Ib32567d2c15ce651815858000035ac5aa6f35224
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
For platforms with builtin testdata/sandboxed platforms we need to
change the current directory to be able to create files.
Change-Id: I440205c95dd6df1308c6bf24b1b0f67fd697feab
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
A test should not write to its directory. Amends change
d0b54cede8.
Task-number: QTBUG-47176
Change-Id: If15258b4aed199792fab422b7ac1d74e22a9e322
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
An empty read or a failed write on the underlying QIODevice of the text
stream would lead to an early return where we wouldn't correctly restore
the QIODevice::Text flag of the io device.
Change-Id: I5b632f45dea6ede3f408113556c3dad1b96574e2
Task-number: QTBUG-47176
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suppose the user connects QProcess::readyReadStandardOutput with a
slot that calls QCoreApplication::processEvents.
Assume the event loop did not handle events between QProcess::start
and QProcess::waitForFinished. The process writes to stdout and exits.
QProcessPrivate::waitForFinished calls drainOutputPipes which calls
QWindowsPipeWriter::waitForReadyRead. This in turn will trigger
_q_processDied via the readyRead signal and processEvents.
_q_processDied will delete the pid object and set pid to null.
After drainOutputPipes returns, _q_processDied is called again but it
must not be called if pid is already destroyed.
Prevent calling _q_processDied if pid is null.
Task-number: QTBUG-48697
Change-Id: Iee047938ee1529057a1a43d71f4e882750903c7e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
