Use a simpler constexpr to generate type name on gcc This
works around an ICE on gcc in release mode when compiling
with PCH enabled. As the type we're getting from Q_FUNC_INFO is
already in a somewhat normalized form, this requires significanlty
less processing and esp. not a recursive constexpr method which
I suspect triggers the ICE.
Fix integer type conversions to also properly normalize long long
values (to q(u)longlong. Make sure the mapping also works on
MSVC, where long long types get mapped to __int64. Also, normalize
unsigned short and unsigned char to ushort and uchar, respectively, to
follow the convention set by uint and ulong.
Add some test cases to verify the mappings.
Change-Id: I3dec5764450bf22ab6f066597803c3f46c2cd5ac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
One can call addResult(value, index) twice and consequently set the
value twice by the same index. This seems rather strange and probably
should not be allowed. This commit rejects setting results when there's
already a valid result by that index. Consequently, this fixes memory
leaks caused by N-times-called addResult(..., index)
Fixes: QTBUG-86828
Change-Id: I77494f2cb73ce727ffad721cfcdcaa420899eb25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This reverts commit 7544c242cb, which
reverted the first removal of the parameter under the assumption
that it caused flakiness in tests.
The flakiness was instead caused by changes to the wait functions
in QTest, so remove the parameter again.
Change-Id: I98154d5d7268375aebbcb09de757e75d9b765c5f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This commit restricts operator<<(QDebug lhs, QVariant rhs) to only work
if rhs is actually of type QVariant (instead of any type convertible to
QVariant). This is especially important as
a) we check in QMetaType whether (slightly simplified) QDebug{} <<
std::declval<T>() is valid, and if so, register a function which
simply uses the operator.
b) In QVariant, we ask the metatype system for the contained types
registered debug function and then use it.
If a type now does not have its own operator<< for QDebug, but is
implicitly convertible to QVariant containing itself, this would lead to
an infinite recursion, when trying to use qDebug with that type. The
registered function in a) would just convert the type to QVariant, and
then ask the QVariant to print itself.
Disallowing implicit conversions in qDebug in general was considered
(i.e. adding template<typename T> operator<<(T) = delete in QDebug ),
but discarded as it breaks too much code relying on conversions.
Fixes: QTBUG-87122
Change-Id: Ib709297670cbc6cc307efd0dfd8e5b0279df9414
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFuture::takeResult() currently returns std::vector instead of QList,
because QList does not support move-only types. Disable this method
until QList is fixed to work with move-only types in Qt 6.1.
Also did minor doc-fixes.
Change-Id: I87feaf75d9433a3b540edd00039c3e21d6994985
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As propertyobservers can execute arbitrarily complex code, they can also
modify the obsever list in multiple ways. To protect against list
corruption resulting from this, we introduce a protection scheme which
makes the list resilient against modification.
A detailed description of the scheme can be found as a comment in
QPropertyObserverPointer::notify.
Task-number: QTBUG-87153
Change-Id: I9bb49e457165ddc1e4c8bbdf3d3c9fbf5ff27e94
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Implement the better rounding mechanism that was previously blocked
by requiring C++14 to be constexpr.
Change-Id: I4e5b179ce0703f5c0b41c3f0ea00d28dfe53740c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Pending results were never cleared by result store. This led to memory
leaks when the results never transitioned to "visible" results
Change-Id: I674302eb51542ad5f4d918da68d616428c73ae9f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It was previously casting enum values to int, which produced unhelpful
answers when a test failed. Better to have them as enum values that
get printed as their names, which are actually informative.
Change-Id: I1bf2971b1426bdbbc321bb48f45ee3e5799e76ec
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QDateTime's addDays(), addMonths() and addYears() neglected to check
for validity before doing their job, with the result that they could
produce "valid" (but wildly inappropriate) results if used on an
invalid date-time. Added tests for this case (and the boundary).
Change-Id: I7b0d638501cb5d875a678cde213547a83ed7529e
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's range of possible values is wider than anyone generally
needs, but let's not do confusing things when someone does overflow
it.
Change-Id: Ifbaf7a0f02cd3afe7d3d13c829bf0887eba29f7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Previously, a QDate representing more than about 0.3 gigayears before
or after the epoch would overflow the millisecond count and produce a
"valid" date-time that didn't represent the date and time passed to
its constructor. Changed to detect such overflow and produce an
invalid date-time instead, if it happens.
Corrected some tests that wrongly expected to be able to represent
extreme date-time values with every time-spec. The (milli)seconds
since epoch are from UTC's epoch, so converting to another offset,
zone or local time may give a value outside the actual range. Added
some tests for the actual exact bounds.
Task-number: QTBUG-68855
Change-Id: I866a4974aeb54bba92dbe7eab0a440baf02124f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Currently
A a;
QVariant::fromValue(&a).value<const A*>() == nullptr;
Still casting non const to const is safe, and worked in Qt5.
After this change
A a;
QVariant::fromValue(&a).value<const A*>() == &a;
Change-Id: I257049d084c712b00a338a2943d379aa478e0981
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Change types returned and accepted by capacity-related QArrayDataPointer
functions to qsizetype:
1) QArrayData (underlying d-ptr) works with qsizetype
2) QArrayDataPointer::size is of type qsizetype
3) All higher level classes that use QADP (e.g. containers)
cast capacity to qsizetype in their methods
Additionally, fixed newly appeared warnings through qtbase
Change-Id: I899408decfbf2ce9d527be7e8b7f6382875148fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Even before adding support for fractional hours, a fraction of a
minute might potentially have represented a whole number of seconds by
a fractional part that, due to rounding, was less than the whole
number of seconds by less than half a millisecond. Previously, the
parsing would have clipped the fractional part at 999 milliseconds, in
the preceding second, instead of correctly rounding it up to the whole
second.
For QTime::fromString(), which can't represent 24:00, and for
TextDate, which doesn't allow 24:00 as a synomym for the next day's
0:0, applying such rounding to 23:59:59.999999 would produce an
invalid result from a string that does represent a valid time, so use
the nearest representable time, as previously.
Added some tests and amended others.
[ChangeLog][QtCore][QDateTime] QDateTime and QTime, in fromString()
with format ISODate or TextDate, now allow a fractional part of the
hour, minute or seconds to round up to the next second (hence
potentially into the next minute, etc.) when this is the closest
representable value to the exact fractional part given. When rounding
up would turn a valid result into an invalid one, however, the old
behavior of clipping to 999 milliseconds is retained.
Change-Id: I8104848d246cdb4545a12819fb4b6755da2b1372
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Previously we used 0:0 on the next day, which might fall in a
fall-back's gap.
[ChangeLog][QtCore][QDateTime] When fromString() reads 24:00 in ISO
format, it now uses the start of the next day, rather than 0:0 on the
next day. This only makes a difference if the next day's first hour is
skipped by a time-zone transition.
Change-Id: Ib81feca5dc09fa735321b6ab76d5d118d6db6fd2
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Try to get rid of APIs that use raw 'const {char, QChar} *, length'
pairs. Instead, use QByteArrayView or QStringView.
As QStringConverter is a new class, simply change the API to what we'd like
to have. Also adjust hidden API in QStringBuilder and friends.
Change-Id: I897d47f63a7b965f5574a1e51da64147f9e981f6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QUrl hostnames must be compliant with STD3, but we must somehow accept
file paths that begin with double slash but aren't valid hostnames.
Because the file URI spec requires us to start with "file://" anyway, we
can represent those with four slashes. Note that on Unix "//X/y" is a
valid but local file path. If given to QUrl::fromLocalFile(), if the
path at the root does parse as a hostname, we will still try to
normalize (the above becomes "file://x/y").
[ChangeLog][QtCore][QUrl] Changed QUrl::fromLocalFile() to accept
Windows UNC paths whose hostname component is not a valid Internet
hostname. This makes QUrl able to accept extended-length paths (\\?\),
device namespace (\\.\), WSL (\\wsl$), etc.
Pick-to: 5.15
Fixes: QTBUG-86277
Change-Id: I3eb349b832c14610895efffd1635759348214a3b
Reviewed-by: David Faure <david.faure@kdab.com>
No change in testing, juts changed names and order.
Pick-to: 5.15
Change-Id: I3eb349b832c14610895efffd16357498454bcd52
Reviewed-by: David Faure <david.faure@kdab.com>
Also add the very same operators to the QBasicUtf8StringView
class to overcome the compiler issues seen on gcc.
Fixes: QTBUG-86481
Change-Id: I12484455ebd3b7b38d4ad67c38977d76f9b3ddfa
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also adjust the QString constructor from QByteArray to ignore
\0 characters in the string (and not terminate conversion there).
[ChangeLog][QtCore][QString] Constructing a QString from a QByteArray
will not stop at intermediate '\0' (null) characters in the string as
in Qt 5, but will convert all characters in the byte array.
Change-Id: I1f6bfefe76dfa9072b165903fec7aa4af1abd882
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously the ISO time format would tolerate trailing cruft at the
end in various cases even though there might be an offset specifier
after the time, which should *not* be separated from it by anything
(not even the spaces we originally planned to still tolerate).
The RFC date format is forgiving about space, as is suitable for
parsing of RFC-822 headers, but the other formats should match the
handling in QDateTimeParser, which rejects any dangling cruft.
At the same time, since this required a re-write of
fromIsoTimeString() in any case, add support for the ISO format that
gives the hour a fractional part and skips minutes and
seconds. Previously we only had support for fractional minutes (with
no seconds). The hour without even a fractional part is also valid.
Reworked the documentation of Qt::DateFormat as it was wrong in
places, inconsistent in its formatting and incomplete. Adjusted some
tests to match the new behavior. A fraction separator with no
following digits should have been recognized as an error previously
and now is.
[ChangeLog][QtCore][QDateTime] The ISODate and ISODateWithMs formats
now reject trailing cruft (including spaces) at the end of a time
string. They also gain support for parsing hour-only formats,
including the hour-with-fractional-part format.
Task-number: QTBUG-86133
Change-Id: I38ad1479ae033407f7df97ffbeb7c4bcd463d04a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name toSecsSinceEpoch() gave no hint to the fact that the test
was, in fact, *also* testing round-tripping of the ISODateFormat.
Since there are other tests for string conversion, make this a simple
test of toSecsSinceEpoch().
It did the round-tripping via two methods with overly-terse names that
might just as well be local lambdas - now redundant, so removed.
Change-Id: I1e4fb1cc90224312c995596a8f3fe2bc5d9dfa15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Also drop superfluous trailing 0s from QTime's constructor and add
space after commas.
Change-Id: Ie3ae87fd497456d6447c55e5d2c808ef59c9768d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Since we drop the lock while deleting threads, we need to handle
the queue possibly being accessed and changed by the pool threads
while clear() is running.
Pick-to: 5.15
Fixes: QTBUG-87092
Change-Id: I7611edab90520454278502a58621e299f9cd1f6e
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Address an old ### Qt 5 comment. The method has been documented as deprecated
and replaced by QProcess::processId since at least Qt 5.9, so we can first
properly flag it as such for 5.15.2, and remove it from Qt 6 in a follow-up
commit.
Change-Id: Ic4e3351740617083b16723db8eef7a341bccfbf6
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add begin()/end() on QRegularExpressionMatchIterator, making
iterators over an iterator (like directory_iterator).
[ChangeLog][QtCore][QRegularExpression] The iterator object
(QRegularExpressionMatchIterator) returned by a global match
is now usable in a range-based for loop.
Change-Id: If3d31bd2e84e7d1fb626a0b3d2745914dff03e39
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use std::hypot() instead of sqrt() of a sum of squares.
This ensures length() can't be zero when isNull() is false.
Use length() in QLine::setLength() rather than duplicating that.
Clarify and expand some documentation; isNull() never said what
constituted validity, nor did unitVector() mention that is should not
be used on a line for which isNull() is true. Make clear that lines of
denormal length cannot be rescaled accurately.
Given that we use fuzzy comparison to determine equality of
end-points, isNull() can be false for a line with displacements less
than sqrt(numeric_limits<qreal>::denorm_min()) between the coordinates
of its end-points (as long as these are not much bigger); squaring
these would give zero, hence a zero length, where using hypot() avoids
the underflow and gives a non-zero length. Having a zero length for a
line with isNull() false would lead to problems in setLength(), which
uses an isNull() pre-test, protecting a call to unitVector().
(It was already possible for a null line to have non-zero length; this
now arises in more cases.)
Restored QLine::setLength() to the form it had before a recent change
to avoid division by zero (which resulted from underflow in computing
the length of a non-null line) but allow for the possibility that the
unit vector it computes as transient may not have length exactly one.
Add tests against {ov,und}erflow problems in QLine. Reworked the test
added during the divide-by-zero fix to make it part of the existing
test.
Pick-to: 5.15 5.12
Change-Id: I7b71d66b872ccc08a64e941acd36b45b0ea15fab
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
To match QString and QByteArray behavior
Change-Id: Ifce4a5dee6fc9077e855a24499f11f911e359cf5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were missing 64-bit signed mul_overflow on 32-bit platforms and in
those where we did have it, the detection was awful (both for signed and
for unsigned). So if one of the parameters is a constant, we can
simplify the code generated.
Change-Id: Ia99afccf0c474e20b3ddfffd162a60d269eb1892
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before we had the option of eager evaluation, we were able to use the
dirty flag to detect whether we are recursing. However, eager properties
will lead to a evaluateIfDirtyAndReturnTrueIfValueChanged call, and that
in turn will clear the dirty flag.
Introduce a new member to detect that situation, and set the bindings
error state to BindingLoop if we detect that kind of loop.
Change-Id: If40b93221848bd9e9422502318d992fad95b0b74
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was already used many places directly making the code inconsistent.
Change-Id: I3b14bc6c333640fb3ba33c71eba97e78c973e44b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In the past, string formatting and parsing was done in the users
locale. Now, the C locale is consistently used in QDate(Time) and
localized functions are offered in QLocale. This patch reflects
this change in the documentation.
Change-Id: I81afda9063fa232d06841d63f69e19b49f8083f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's comparisons just compare milliseconds when both values are
local times and their statuses (hence DST-ness) match. It can do the
same for time-zones. While doing the same for UTC and fixed offsets
wins nothing, it also costs nothing, given that we're already checking
the spec.
Task-number: QTBUG-75585
Change-Id: Ib6d824569aba8def2f1319ef3a11cca6869a5b5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add some unit tests using emojis as separator characters to check
utf handling.
Change-Id: I03c4bb5cd349e649c58e8a908c38a0185d80e722
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Binary provider:
It was not possible to remove the first glob in a local override,
because the mainPattern handling would re-add the first glob back.
XML provider:
It didn't support glob-deleteall.
Also, the order of the providers was wrong. We want to pick local
overrides first, the internal DB has to go last in the list.
Fixes: QTBUG-85436
Pick-to: 5.15
Change-Id: I9a4523f37cd962c730df9a6ed992bd01c075bf03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
MSVC has strange problems with it and we don't actually need it.
Change-Id: I2c443946d52d475208800f310b5f910da165c99b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
