this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add a command line program allowing to test rename, copy, etc.
Task-number: QTBUG-28246
Change-Id: Ie9667f03b65a874475700ec9ecd91ca2ed32ed97
Reviewed-by: David Faure (KDE) <faure@kde.org>
move QT+=widgets (and printsupport) statements before the install
statements, and de-duplicate some cases.
also move some TARGET assignments to a more conventional place.
Change-Id: I6140d8611680f66c24490e5894e4eb90cae95635
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In SHA 51914375b6 the rubberband
selection was fixed, so it followed the scene-point on mousemove.
However wheelEvent could move the view - but avoid update of the
rubberband (that would not be updated until next mouse-move).
This patch fixes that (and generally improves rubberband behavior)
since QGraphicsViewPrivate::mouseMoveEventHandler is called by
replayLastMouseEvent, which is called from various places,
where we need to update the rubberband (e.g scrollContentsBy).
Change-Id: I1b78c27edaaecea797a2319086d7a11d437d2bd3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There are two ways to register a type: using Q_DECLARE_METATYPE(T) and
using qRegisterMetaType<T>("T"). Doing one thing in one translation
unit and another thing in another TU constitutes an ODR violation,
because the value of QMetaTypeId<T>::Defined will differ in the two
TUs.
By adding the information whether a type was declared with
Q_DECLARE_METATYPE to the typeFlags(), such a use will trigger
the existing binary-incompatibility failure that checks for
equality of the incoming type flags with the stored ones (if any).
I had to encode the type as a defaulted function argument in order
to avoid the linker merging instantiations of the function templates
and therefore rendering the detection moot.
Change-Id: I82017caf300458b411cc8ac2f6653536fac64117
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Manual tests are not supposed to be run by "make check"
Change-Id: I0539b94f5286e89ddad2edf487d4b0d82fc2f374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Bring Qt 5 on par with Qt 4, prepare for more comprehensive
support later on.
Introduce device independent pixels (dips), device pixels,
and devicePixelRatio. Add high-dpi support to QPainter,
QGLWidget, the cocoa platform plugin, mac and fusion styles.
Dips are similar to CSS pixels, Apple points and
Android density-independent pixels. Device pixels
are pixels in the backing store/physical pixels on screen.
devicePixelRatio is the ratio between them, which is
1.0 on standard displays and 2.0 on "retina" displays.
New API:
QImage::devicePixelRatio() and setDevicePixelRatio()
QPixmap::devicePixelRatio() and setDevicePixelRatio()
QWindow::devicePixelRatio()
QScreen::devicePixelRatio()
QGuiApplicaiton::devicePixelRatio()
Change-Id: If98c3ca9bfdf0e1bdbcf7574cd5b912c9ff63856
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It's again possible for QWindows and widget windows to go into
fullscreen mode on the Mac.
Change-Id: I7b304a135838394ef0392f89be4f225f2949fad3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We should consider the scene-position when we are expanding
moving a rubberband. If the user does some auto-scroll
(Qt should support that itself, but that is another matter)
then the rubberband should not keep the (old) local position
to calculate the rubberband extension, but instead use the
scene-position that was actually clicked.
Change-Id: I04a2df6a1edae8b3587e1ac2104c7fe4ccfb7762
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If we are reacting on the sectionResized signal and we call
setDefaultSectionSize we should ensure that we are not moving
the mouse-cursor.
This is an improvement of f8f6acb05c
Change-Id: I1adee7821bc8fcc9633f692bfd515f2c458b12c8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patch fixes the manual move of sections when auto scroll is on.
It is done in QAbstractItemView::doAutoScroll by letting the
qheaderView use its parents scrollbars if they are childs of a
QTableView or QTreeView.
Task-number: QTBUG-993
Task-number: QTBUG-1103
Change-Id: I70d999d9a07c3566e42d01cc5ebb47a69a83d9d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
a) Use the new Qt5 OpenGL API for testing of GL painting
b) Simplify: Use the higher-level QBaselineTest API instead
of the low-level baselineprotocol API.
Change-Id: Ib5f47f6fe68837dfdc8dc3a74638c5cb0b724614
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This prevents the user of moving the leftmost column.
There will be no API to allow move of the tree-structure.
It is very weird to do that, so it shouldn't be a problem.
In case it is a big problem somewhere it can be hacked with:
QTableView unused;
unused.setVerticalHeader(tree->header());
tree->header()->setParent(tree);
unused.setVerticalHeader(new QHeaderView(Qt::Horizontal));
Task-number: QTBUG-332
Change-Id: I3a251c8d0fd472ec0ad7edb20a7f3e00af7e0da8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fixed menu handling on Cocoa so if a menu is enabled/disabled or made
visible or not then it will keep this in sync with the appropriate
native menu entry.
Change-Id: If269185fcf065fb1b2f60d6ef8c27c107eb4509f
Reviewed-by: Pasi Matilainen <pasi.matilainen@digia.com>
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Adding QCheckBox, QComboBox, QLineEdit etc. into an HBox layout or grid
layout makes the layout look like a snake's trail. Fixed the positioning
of these widgets to make the layouts visually more appealing.
Updated qmacstyle auto-test accordingly.
Task-number: QTBUG-13635
Ammended-by: Gabriel de Dietrich
Change-Id: I89461f9aad68ea8488070ed06257b9b8e7f493c5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
It's necessary to set the fieldGrowthPolicy on the QFormLayout in order
to have expanding fields on the Mac. Geometry formatting with
negative x and y values looks better. Display fewer
decimal digits for double fields.
Change-Id: Icb252c0c3fb7b605253e04c3361beba124570840
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Added a test for QMacCocoaViewContainer which will enable the testing
of the fixes coming
Change-Id: I73e9540bc58411634f0da7d398eca4b7ffafba8e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Shows property values in fields which auto-update when the properties
change.
Change-Id: Ib97566a74cb8d0fff5f85bf97783e89dfb07481f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When a parent item had its visiblity toggled, then the child item would
not update if the parent item had ItemHasNoContents and
ItemClipsChildrenToShape set. This is a common use case in declarative as
the root item has ItemHasNoContents set.
Task-number: QTBUG-26846
Change-Id: Id6592ebc4ba2caa4331a4a71f7247e40993131b6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add -widgetminimized, -widgetmaximized, -widgetfullscreen,
-windowminimized, -windowmaximized, -windowfullscreen
as command line option to test creation of windows in
these modes
Change-Id: If192c131c8996d3b67648427e5784da47ffee971
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Using the nullary version has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything. So I've added the macro where it
was missing, or moved it to a central place when it existed
hidden.
In tst_qnetworkreply, this became a bit tricky, because a private
header is conditionally included, so moved the Q_DECLARE_METATYPE()
into a conditional section, too.
Change-Id: I71484523e4277f4697b7d4b2ddc3505375162727
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Make them compile with 4.8 for comparison
- Add Active to WindowStates control
- Add -layout option to windowgeometry
Change-Id: I052330eb8689883c104a0552708ea700c7cd790a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This patch improves the manual resizeSection a bit. Before we didn't
consider that the program could maybe resize other sections when the
user was resizing one section.
The main issue with that is that setOffset is so smart that it helps
moving the mouse cursor - however it really shouldn't do if the
program is trying to change something too.
Maybe this won't solve all (possible) problems at once - but it is
a fixed needed just to make something work - trying to make anything
work without this fix is horrible....
Change-Id: I3cefa375a9b8ee4c1ef1e08ba0900025c671e4c6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the server sends a redirect with no body, the file is null
Change-Id: I49fd1d8a4cdd404497ebef4c7f3b478960776896
Reviewed-by: Richard J. Moore <rich@kde.org>
Implement the QPA platform menu interface for Cocoa,
including native menubar support and merging with the
predefined menus created from the bundled .nib. Cleanup
code previously used to maintain the menus, and add
a manual test of the menus code.
Change-Id: Ia99267ddb6485e18e05c540eb32c5aee6cbb85db
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Use "--headers=file" where the file contains the raw headers to send.
This is useful for replaying requests from log files.
Change-Id: I3bbe582d96fc9797f692a0d5772e8164f8265ce0
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Make it possible to shadow-build using Qt 4.8 for comparison.
Change-Id: I1a18b7f1d03b11f0420aab14455e2c53d1afd6ba
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Remove all non-UTF-8 sequences from source code in Qt.
Change-Id: I46d9cb23ef2199894896f171d553b3144822f36c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
