__GlobalConfig_install_dir translates to lib/cmake/Qt6/ and 3rdparty
modules will be in lib/cmake/Qt6/3rdparty which seems to be a logical
place for them.
Pick-to: 6.5
Change-Id: I90c715b9502b0dfc666bb3202a838f20ba6110cf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_FEATURE_ltcg is TRUE if either of
CMAKE_INTERPROCEDURAL_OPTIMIZATION=ON or
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>=ON are passed to the
configure, or the cmake command.
Pick-to: 6.5
Change-Id: Ibaece67de6cc6f89e505038fd02fb50008c47d48
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There was a plan to invert the API, but since the TODO, we are settled
on the non-inverted name, ie., GENERATE_CPP_EXPORTS.
Pick-to: 6.5
Change-Id: I84f531d870965e0b7d0d821d1ff08606ab8054ab
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
<out_var>_private_header_dir and <out_var>_private_module_header_dir are
documented to point to "the specific framework version and framework
bundle version".
Pick-to: 6.5
Change-Id: I00053f106ec9be88f7892c842ca75549cfc54124
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This works by collecting the paths of all blacklist files
and deferring a call which ultimately reads all of the files and
glues them together to form a master blacklist file for the batch.
There might be conflicting function names inside the batch. For now
we ignore the problem, while keeping in mind that it exists.
Fixes: QTBUG-110016
Change-Id: I9c8412097418c6e93297ab89af718d7466e2e451
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Alexandru mentioned that at the time qtdeclarative was still using the
variable, but from then, he replaced those as well, and I couldn't find
any usage anymore either.
Change-Id: I6a1893c2dfaa483dc8cb865f7bacf08cadca985b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Stub targets introduced in 65b7aacb make the old batch target detecting
measure in qt_internal_extend_target,
qt_internal_undefine_global_definition, qt_internal_add_resource
obsolete, since now the targets actually exist in the build system.
Unconditionally fail if the target does not exist and if it does, query
for its inclusion in the batch
Change-Id: I1cd1d8cc7fbf4bdbd2289a1b38ecbea1e93a06c8
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
In developer builds we don't install tools, so syncqt executable is
located in its RUNTIME_OUTPUT_DIRECTORY but not by install path. This
works fine in general case, but in multi-config builds the
RUNTIME_OUTPUT_DIRECTORY path doesn't match the install path. So syncqt
target points to wrong location in this case. It makes sense to use the
existing IMPORTED_LOCATION of syncqt executable directly if Qt is not
supposed to be installed. Also check if the syncqt executable exists at
the expected location before creating the imported target.
Pick-to: 6.5
Fixes: QTBUG-109864
Change-Id: I0de647b2a73169a0d48bd88edeb7ff00975fa774
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The flag avoids overriding of the default CMake build config when
building syncqt.
Add extra checks to the make sure that configure-time tools use the
correct build type.
Fixes: QTBUG-109792
Pick-to: 6.5
Change-Id: I572fed60c58e59297fa559aea6eb86af94b979b7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Implement platform independent tracing backend in Common trace format.
This allows tracing in platforms without own/existing backend and
analysing all platforms with the same tooling. The backend is the basis
for further work in application level profiling area.
The backend is implemented as a plugin that is loaded immediately when
the application starts in order to process all trace events. The backend
avoids using Qt classes so that it doesn't generate trace events
itself. Adds plumbing to configure the new backend.
Modifies the tracegen and tracepointgen tools to support the new
backend.
Task-number: QTBUG-106399
Pick-to: 6.5
Change-Id: I80711be52d4d48e1acbc72edffbdf3f379fce52a
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Add it globally so that each module using tracepoints don't have to
add it themselves to each modules configure.cmake.
Pick-to: 6.5
Change-Id: Id58cfaff5cd715b2667da2470001d646117f9f28
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Allows automatically generating tracepoint files by scanning source
files for instrumentation macros.
This makes it easier to add tracepoint support to modules and also
ensures that the tracepoint files do not get out of sync with the
functions they are tracing.
Q_TRACE_INSTRUMENT generates entry/exit tracespoints for a function
it is set. Q_TRACE_PARAM_REPLACE is used to change a function parameter
for these functions to convert it to supported parameter type.
Q_TRACE_POINT can be used to create a standalone tracepoint.
Q_TRACE_PREFIX can be used to add prefix for generated tracing backend
for example to add includes for types used in the trace points..
Task-number: QTBUG-107238
Pick-to: 6.5
Change-Id: Ib395b80838434ceb72683dac0545ca20c4d09455
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Consider a cross build of Qt with qtbase, qtshadertools and
qtdeclarative. If a user projects only links against QtQml without
creating an actual QtQuick module, no host tools from qtdeclarative are
needed.
Normally, find_package(Qt6Qml) pulls in Qt6QmlTools and errors out if
it's not found. By setting QT_ALLOW_MISSING_TOOLS_PACKAGES when
configuring Qt, one can disable the error and build a user project such
as the one outlined above.
Pick-to: 6.4 6.5
Fixes: QTBUG-109547
Change-Id: I45e727713912d19e6007a7fbf3d61533f82b71d9
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Jaeyoon Jung <jaeyoon.jung@lge.com>
Otherwise CI hangs if no existing browser can be reused (typical
case)
Fixes: QTBUG-109876
Change-Id: I63436a23c23c4b74c27c18effafde53bb6a4a34e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This doesn't seem to be relevant anymore, and the
`from_lib_location_to_prefix` seems to be set correctly.
Change-Id: I368da226ed33a303662856b0bc3ccbf6c328250a
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The new version uses PARSE_ARGV which deals with semicolons better.
Task-number: QTBUG-99238
Change-Id: Ie9276219400326a67ffa9cf5fc456ae7de0bbcd2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
We decided that it's better to disable PkgConfig for Android, as it is
unlikely that someone uses them.
Task-number: QTBUG-110007
Pick-to: 6.5 6.4 6.3 6.2
Change-Id: I6ae1059ddd05feeec047fbb906c7dba1586e816b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This is needed for static plugins to work correctly as currently
the only place where plugin logic is handled for non-standalone
builds is in qt_internal_add_executable - adding the library later
when encountered in one tests that get batched does not trigger
plugin handling logic.
Fixes: QTBUG-109812
Change-Id: Idcc2bc6b42b2b7ad6afb9796f554b0529de3de5f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
As of f68e2c92cc, and its follow up
changes, we can now link individual plugins statically, even if the
Qt build is generally a shared build.
This allows us to build Qt for iOS as shared libraries, while still
keeping the platform plugin as a static library, since this is
harder to port over to a shared library.
This gives the benefit of faster turnaround during development, as
well as binary compatibility promises for the main Qt libraries,
without having to go fully shared for all of Qt.
Static builds are still the default, due to the downsides of larger
application bundles and slower load times for shared builds.
For now the user has to manually tick the "Embed & Sign" check
box in Xcode for each Qt library, which is only available with
Xcode projects generated by the qmake Xcode generator.
Task-number: QTBUG-85974
Change-Id: Id2b7bd2823c8e7c79068dda95295b574ada8d7f2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
According to the CMake documentation, IMPORTED_TARGET should be
specified before the moduleSpec, and after QUIET.
Additionally, double-quote the moduleSpec everywhere, since before, it
was only quoted in some cases.
While this is not required for pkg_check_modules to work, it unifies the
coding style.
Pick-to: 6.5
Change-Id: Ic8ad708a8146f9b39ee40e9a719412441e231452
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When encountering a batchable target, only add its defines to the
sources that the target contains. Otherwise, the defines interfere
with other tests in the batch.
Fixes: QTBUG-109848
Change-Id: I35d1665d29bb0ce93b82059f7f3b715070539d21
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Set the RUNTIME_OUTPUT_DIRECTORY for configure-time executables so
executable will be located inside the QT_BUILD_DIR. This allows to
re-build syncqt and make sure ithat ts binary is replaced and located
in the libexec directory.
Comment on how to rebuild syncqt. Configure-time tools reserve the
original tool name for the imported executable. To re-build syncqt use
'syncqt_build' target.
Task-number: QTBUG-109792
Change-Id: Id7d912b1d75d18d82cb2a69fbd62b89440120d78
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
All current modules are free of qAsConst, make sure new ones will be,
too.
Change-Id: Iae3c67bca86eddf62ae664b00ff39a9b513d7290
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qt-cmake-standalone-test uses add_subdirectory call when evaluating the
project. This leads to an error if users try to use path to
CMakeLists.txt as an argument, instead of directory when configuring
standalone tests with qt-cmake-standalone-test. It makes sense to check
if the user-specified path points to CMakeLists.txt and cut the
filename part when calling add_subdirectory.
Pick-to: 6.5 6.4 6.2
Change-Id: I6b9ac0ca8323eaf11f219eb1e6bed3057120a231
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...to 'name'.
It's clear from the context that this is the name of a module.
Pick-to: 6.5
Change-Id: I07700a4413ceb12695c153e16d0a2dcded615d11
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
syncqt arguments contain full paths and may exceed the supported
command line size on some platforms. Use a single rsp file to pass
all arguments to syncqt.
Added the missing end-of-line terminators for error messages.
Pick-to: 6.5
Change-Id: I60ad0f6770458d5256e67f042a63a3c16cd5ecb5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Make options for enabling "simd128" and "exceptions" public:
-feature-wasm-simd128
-feature-wasm-exceptions
Make sure both appear in the config summary and feature
list. Move the exceptions code so that they are next to
each other in the cmake file.
Pick-to: 6.5
Change-Id: I3975b56703f40f7ffff270754535bc2eb5bfe488
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Qt 6.5 will require emscripten 3.1.25. This is not the
most recent version (3.1.27 at the time of writing),
however .26 and .27 make changes to stack layout and size
which require further investigation.
Change-Id: Ibe285ef160d450d6b2c63a7fb71d3561b0032e37
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This makes sure the browser only uses a basic password store and
doesn't try to do anything fancy with the OS pass store, since it
causes an issue on opensuse (kwallet isn't set up in CI).
Change-Id: Ib48a15f4834fa9bb26cf8cf3fff9bb4d0fd0238a
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Static Qt builds are not covered by BC guarantees, but since all
'libraries' are linked into a single executable, we face in all users
of the library the same ODR violation that we faced within the
implementation DLL: we can't define the same symbol as inline in some
TUs and out-of-line in others.
In the past, we decided to always inline in static builds, but that
breaks users which, by Hyrum's Law, have come to depend on the
non-existent BC guarantees for static Qt builds.
By switching to never inline¹ in static builds, we restore BC for such
users. The performance issues should be minimal, since LTO will anyway
inline whatever it wants, independent on how it was declared.
¹ except when the deprecation point has passed over the Qt version the
API was inlined (-disable-deprecated-up-to configure switch).
[ChangeLog][QtCore] Restored binary compatibility for static Qt
builds broken by the QT_INLINE_SINCE mechanism. Qt still does not
guarantee BC for static build configurations otherwise.
Fixes: QTBUG-109449
Pick-to: 6.5 6.4
Change-Id: Ie3fa62621b74dc5e9dac301b9882c0e3c3999eaf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've ported all qExchange() to std::exchange by now, across all
modules, but the one in QScopedValueRollback was left behind, because
it requires C++20's version of std::exchange (constexpr).
Since q20::exchange was not approved, replace the qExchange() here
with two moves and add a comment to port to std::exchange() once we
can depend on C++20.
Then add QT_NO_QEXCHANGE to avoid new uses from creeping in.
Change-Id: I488e252433e78fb2766639dbe77a22a55196cfd1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The .bat extension was already handled for, __qt_cmake_private_path,
and adding the extra one was causing an issue where
qt-cmake-standalone-test was calling qt-cmake-private.bat.bat!
Amends 8aae821b5a
Pick-to: 6.5
Change-Id: I9c374440c89c617e31f369fde8f041e5c1d17a03
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This simplifies deployment and eliminates the possibility
for duplicate downloads due to the browser/server not
understanding symlinks.
Change-Id: Ife22c052c424f309d76ff0f9118c01e98426da95
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We agreed that qt-configure-module needs to come back to bin/ as it's
user-facing.
Amends d77ce33082
[ChangeLog][CMake] Upon further consideration, qt-configure-module
was deemed user-facing, and was thus moved back to ./bin on
all platforms.
Task-number: QTBUG-107621
Change-Id: I1f7874436e5b3988242091fc0303ea828f29d5c6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When collecting the dependencies of a target, it can happen that we
encounter a target that is not visible in the current directory scope.
This can usually be fixed by moving the corresponding find_package call
to a higher directory.
Detect this situation and print a warning with instruction how to
silence this warning: either by fixing the situation or by setting
QT_SILENCE_MISSING_DEPENDENCY_TARGET_WARNING.
Fixes: QTBUG-108286
Change-Id: I9033fedbd81ef0710b7cc11fab0e94e67c74ff86
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This mimics CMake's policy support. The policy state is stored in an
internal __QT_INTERNAL_POLICY_<policy> variable; by using normal
variables, we gain support for stacking for free.
Policies can be explicitly en- or disable via qt6_policy; that command
also has a GET mode to retrieve them again.
Furthermore, one can now pass min and max version to
qt6_standard_project_setup, to opt in to a certain set of defaults
introduced in a given Qt version.
We add support for policies in QtModuleHelpers, so that we can check for
known policies while building Qt itself.
No actual policies exist yet; but a follow up commit will introduce one
for qt_add_qml_module.
Change-Id: I57a0404c9193926dd499f94cc5f73e359355c0b3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt Creator maintains a mapping from Qt version to Android NDK version
and other build information. It's simpler to let the Qt build write the
Android build information into modules/Core.json and have Qt Creator use
this information.
This adds the following properties to the module JSON files:
- built_with.android.api_version
- built_with.android.ndk.version
Task-number: QTBUG-108292
Change-Id: I0febda5192289c5afb1a098880b31bef6317db35
Reviewed-by: Marcus Tillmanns <marcus.tillmanns@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module description JSON files contain architecture-specific
information. Therefore they should reside below INSTALL_ARCHDATADIR
instead of INSTALL_DATADIR.
Moving these files should be unproblematic as there are no known users
of these files.
Change-Id: Ibff1f7b6ce2d1633ebce33861358ad5d1cae2beb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
At the moment when doing a non-prefix build and changing some of those
files, CMake will not update the changes to the build folder unless
done manually or a re-configure is done manually.
qt_copy_or_install() only does copy those files at configure time once,
and using CMAKE_CONFIGURE_DEPENDS would be an overkill here and even
a bit of an extra annoyance, so in this case having a custom command
seem to be suitable.
Done-with: Alexey Edelev <alexey.edelev@qt.io>
Change-Id: I55aa9e9d3eea32a4bb54c64abd4cbdcb891c44b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
It looks like adding dependencies to interface libraries is either not
fixed or broken in CMake versions newer than 3.20. Remove the CMake
version check to ensure that 'lib_pri' targets are executed. This will
restore the initial behavior.
Amends cfcc4ef8ed
Pick-to: 6.2 6.4
Fixes: QTBUG-109240
Fixes: QTBUG-109239
Change-Id: I8c5b317fcdd0a715a1a668b4e955df1acfe4be8b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Upstream commits:
db46fc981fd8c1a46d923aeaf2187dfcc8b50099
1e9e1c508e177b6466282dfad273cf6cfcdf5c76
One useful change is removing the "XINPUT from XCB is experimental"
warning, it's been around and the default for ages.
Task-number: QTBUG-109183
Change-Id: Ie66aa76c5e3ce83d5d654cfa8279a946c7486602
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By adding a CMake option() that is OFF by default.
Change-Id: Ic66cae5bb9739ae1db3e534f671cc1e9e4b09647
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The argument allows to ignore the condition for source files if they
are used in the Qt code without corresponding guards. The header files
of this kind usually have internal guards, that suppress the error
at the location where they are used, so AUTOGEN is skipped for these
header files to suppress the warnings from CMake. If file belongs to
a module, it will display AUTHOR_WARNING which should urge Qt
maintainers to guard the use of the source file properly.
Task-number: QTBUG-103196
Change-Id: I7b4c12031a5d19ff15868d4782c0d396ef7aed8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This will enable all qt internal tools to be able to access files
on paths longer than 255 characters.
Two examples that were not working before: moc and windeployqt.
Fixes: QTBUG-109207
Change-Id: I93f9770f1d3c4f3f2cca4655e4bed89c95b9786b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In CMake versions older than 3.20 add_dependencies have no effect
when adding interface libraries. So need to add the '_lib_pri'
targets to ALL to make sure that the related rules executed.
Amends 190e58e1f4
Pick-to: 6.2 6.4
Fixes: QTBUG-109240
Fixes: QTBUG-109239
Change-Id: I7c565ce3bc15e549569317454c2f7caac823cf66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cross builds, we are not creating versioned links for qt tools. This
patch addresses that. I've changed the signature of the
`qt_internal_install_versioned_link` such that it can be used for
non-target as well, so in cross build the qmake or qtmake.bat can be
processed with the same function.
Fixes: QTBUG-109024
Change-Id: I246621c18325d084622ca92b422e815ed06f1381
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As far as I can tell nothing uses TYPE anymore.
[ChangeLog][QtCore][CMake] The deprecated TYPE option of the
qt_add_plugin() has been removed. You can specify the plugin
type using the PLUGIN_TYPE option instead.
Change-Id: I786fbc772a23ae0037d9a4cf68018e3af5cb061d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This adds a new platform named wasm-emscripten-64
which sets the build and link argument -MEMORY64
You may see this warning, please ignore at your own discretion:
em++: warning: -sMEMORY64 is still experimental. Many features may not work.
[-Wexperimental]
Fixes: QTBUG-104891
Change-Id: I8d3150d239ba72dbef5c2352e0171d6cfbe51b59
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
PPS_LIBRARY and PPS_INCLUDE_DIR cannot be empty at this point (otherwise
PPS_FOUND would be FALSE). But it's arguably good practice to puth paths
in quotes.
Task-number: QTBUG-108930
Pick-to: 6.4
Change-Id: I87128da50f37cd6aa1a66811261a05ceb8c3e790
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After this change, private CMake scripts are mostly live in
`libexec/`, except the `qt-cmake` which will stay in `bin/`.
This doesn't affect the Windows configuration.
- `qt-cmake` stays in `bin/`
- `qt-configure-module` moves into `libexec/`
- `qt-cmake-private` moves into `libexec/`
- `qt-cmake-private-install.cmake` moves into `libexec/`
- `qt-cmake-standalone-test` moves into `libexec/`
- `qt-internal-configure-test` moves into `libexec/`
In cases where `QT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS` is set to
ON, e.g., ANDROID, WASM, both Batch and Bash files will be generated
and placed in `bin/` and `libexec/` accordingly; in both cases,
qt-cmake and qt-cmake.bat will be in `bin/` anyway.
[ChangeLog][CMake] The private Qt CMake scripts, i.e.,
qt-configure-module, qt-cmake-private, qt-cmake-private-install.cmake,
qt-cmake-standalone-test and qt-internal-configure-test were moved
into $prefix/libexec on Unix platforms.
Fixes: QTBUG-107621
Change-Id: Ic4f4ec85f64d2ede0e208bca928959e30be906a6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
pcre2-16 is not the target name provided by the upstream Config file. It is PCRE2::16BIT.
2410fbe386/cmake/pcre2-config.cmake.in (L122)
Pick-to: 6.2 6.4
Change-Id: I89f167e11bf1c72c9fae474ddd12380636ac5df8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we use MSVC to build static libraries, enabling LTCG will
generate very large output, for example, Qt's bundled 3rd party
libraries can be greater than 100MB per file (some of them even >200MB!).
This is not good if we are building a shared version of Qt and
enabling LTCG at the same time. On Windows Qt's bundled 3rd party
dependencies will be built as static libraries and they will make
the final Qt package way too large. From my side, if I only build
a release version, the package size is usually around 500MB but
when LTCG is enabled, it become over 2GB. The exe and dlls' size
don't vary much, but there are many large static libraries.
Fixes: QTBUG-108719
Change-Id: Ic521f500b9c24389524e96a8cdc2e7b3427b51a9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Introduce the variable QT_SKIP_SETUP_DEPLOYMENT to turn off the
generation of deployment support files. Set this variable when building
Qt - but only if we're not building examples.
This avoids a warning about missing patchelf when building Qt with CMake
< 3.21.
Change-Id: I8ff5491eb314ff870c210884fbf90dd4c9ad0219
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
An MSVC debug-and-release build of Qt with the MySQL plugin requires
separate builds of the MySQL client library: a debug and a release
build. There was no way to specify the debug version of the library.
Now, it's possible to configure Qt like this:
cmake ... \
-DMySQL_ROOT=D:\mysql-connector-c-6.1.11-winx64 \
-DMySQL_LIBRARY_DIR=D:\mysql-connector-c-6.1.11-winx64\lib\vs14
This will automatically detect the include dir and the debug and release
library files. We expect that the debug build of the MySQL client
library resides in a "debug" subdirectory below MySQL_LIBRARY_DIR.
If the automatic detection doesn't work to due a different layout on the
build machine, one can set the variable MySQL_LIBRARY_DEBUG to specify
the debug variant of the MySQL client library.
[ChangeLog][CMake] If pkg-config is not used, a debug build of the MySQL
client library can be specified with
-DMySQL_LIBRARY_DEBUG=<path-to-library>. The debug and release variants
of the library are automatically detected. Setting MySQL_ROOT and
MySQL_LIBRARY_DIR is sufficient in most cases.
Pick-to: 6.2 6.4
Task-number: QTQAINFRA-4999
Change-Id: I663fb8ac1dbd07bc73484791be9cc21bff2f4a9b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This is done to avoid cmake syntax errors when adding new tests.
Change-Id: I8106b13a865b990c52e09573488881bd18e64c7f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It looks like these targets used to manage some custom commands that
belong to HEADER_MODULES. We don't currently have a need to use them,
so we clean up the code.
Change-Id: I8095f4de2c91a6c310cccb9b89514c2ce77e32f0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no reason for adding dependency to the custom
'_pri_dep_timestamp' target instead of the INTERFACE_LIBRARY target
itself. This will close the chains of dependency between repo targets
and the HEADER_MODULE dependencies.
Pick-to: 6.4 6.2
Fixes: QTBUG-108815
Change-Id: I0e170d3e0e42d342881beb8aca1cc5a764425826
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Building repo targets may be incomplete as we skip adding
INTERFACE_LIBRARIES as dependencies. This leads to the missing
artifacts belonging to HEADER_MODULES. It seems reasonable and safe to
include INTERFACE_LIBRARIES in the list of dependencies of the repo targets.
Pick-to: 6.4 6.2
Task-number: QTBUG-108815
Change-Id: I83f44018f42dcf2fb1e3299461e17ef53e79c2e5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add the '-mimetype-database-compression' command line argument that
allows to select the preferred compression type for the mime type
database, including 'none' compression type, which avoids mime type
database compression even if respective compression APIs are present
in the system. The argument has the CMake alias called
'INPUT_mimetype_database_compression'.
Change-Id: I66daddae7014d109fa175a5f397e984928f4ee47
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of re-doing, `configure` and `configure.bat` pass an extra
parameter to the `QtProcessConfigureArgs.cmake`. As a result, CMake
removes CMakeCache.txt and CMakeFiles/ before the reconfiguration. If
the user is using CMake 3.24 or newer, this is achieved by passing
the `--fresh` option to CMake call. In older CMake(s), CMakeCache.txt
and CMakeFiles/ found in CMAKE_BINARY_DIR will be removed using a
file(REMOVE_RECURSIVE call.
[ChangeLog] The -redo option now additionally removes existing
CMakeCache.txt file, and CMakeFiles/ directory, and recreates them from
scratch.
Task-number: QTBUG-108287
Change-Id: I11a5c8f9df1247d11eb7097552e6764463583346
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
macOS Catalina (10.15) has reached its end-of-life, and is no longer
supported with bug fixes or security updates by Apple.
Change-Id: I65d0f572785bc77a563be925cf64823c20b9e015
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If I'm right, it seems that the work has already been done, and nothing
uses the `_qt_internal_wrap_tool_command` anymore.
Change-Id: Ib8a5951e8351a26df123045bb5c6001470650b38
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of constantly trying to find packages by calling
qt_find_package on each reconfiguration, record which packages were
found during initial configuration. Then on a second reconfiguration,
skip looking for packages that were not found on the initial
configuration.
This speeds up reconfiguration on certain platforms and repos.
Here are some stats for my macOS qtbase build.
not skip 3.69s user 4.96s system 98% cpu 8.750 total
skip 2.69s user 1.00s system 97% cpu 3.792 total
Top-level build with -submodules=qtquick3d
not skip 15.03s user 10.58s system 97% cpu 26.334 total
skip 13.87s user 5.16s system 96% cpu 19.724 total
Note this is a behavior change from how find_package is used in most
CMake projects, where if a package was previously missing, the
developer can just install the package and reconfigure to pick it up.
With this change, they will first have to remove their CMakeCache.txt
file and configure from scratch, or remove the
QT_INTERNAL_PREVIOUSLY_FOUND_PACKAGES cache variable and reconfigure.
For this reason, we enable this behavior by default only in
-developer-builds.
Builders can also opt in or out by setting the
QT_INTERNAL_SAVE_PREVIOUSLY_FOUND_PACKAGES variable to either ON or
OFF.
Note this behavior does not apply to user projects, or direct
find_package calls (as opposed to qt_find_package).
Fixes: QTBUG-107251
Change-Id: Iee9c5d120eb09e2a94eebb059a2174ef6b241e03
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
So other modules can see it when they're built outside of qt5.git.
Change-Id: I76216ced393445a4ae2dfffd172a52168a2a55b4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This allows one to add an extra set of directories to the build, but let
the compiler know that they are system paths (that is, the compiler
should refrain from emitting warnings in code found there). This extends
INCLUDE_DIRECTORIES and is by necessity a private include set.
Will be used by qtquick3dphysics, due to its PhysX dependency.
Change-Id: I76216ced393445a4ae2dfffd1729c556db0cce3d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
I keep getting this warning because docker-compose is not installed.
Change-Id: Id8e48e8f498c4a029619fffd172932bd86ed03ba
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
When calling file (RELATIVE_PATH), check if the base directory and
header path are absolute. Use the original file path if the paths are
relative to avoid critical errors.
Fixes: QTBUG-108617
Change-Id: I6daddd5c1553cdbfd965650b7c469673c62f0a3d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
If I understood the function correctly, then the example was not quite
right.
Change-Id: I6b6a4845c5ded2a058050dfbecf5db158d32d12a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Since a good number of tests use exec and friends, we want to use
asyncify for them. Asyncify is still possible to enable universally
with device options.
Change-Id: I0916f55328c98f2ba179cda3757eeee9d27f3e47
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Batched tests is the default supported test mode of wasm and should
be enabled without explicitly passing a command line argument.
Change-Id: I79424384e4e8ca6f670de1cb056f4713740a584f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Fix the syncqt issue when two modules are created in the same
CMakeLists.txt and share the build directory. In this case the
second module in the dependency chain rewrites
'module_headers[_generated]' files, so syncqt is not able to
proccess these files correctly.
Amends b89d63515b
Task-number: QTBUG-87480
Change-Id: Ibdcb66e96bdaabadc1c51611f5ed4a637d2f797f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When submitting applications to the iOS and macOS AppStore the
application goes through static analysis, which will trigger on
uses of various privacy protected APIs, unless the application
has a corresponding usage description for the permission in the
Info.plist file. This applies even if the application never
requests the given permission, but just links to a Qt library
that has the offending symbols or library dependencies.
To ensure that the application does not have to add usage
descriptions to their Info.plist for permissions they never
plan to use we split up the various permission implementations
into small static libraries that register with the Qt plugin
mechanism as permission backends. We can then inspect the
application's Info.plist at configure time and only add the
relevant static permission libraries.
Furthermore, since some permissions can be checked without any
usage description, we allow the implementation to be split up
into two separate translation units. By putting the request in
its own translation unit we can selectively include it during
linking by telling the linker to look for a special symbol.
This is useful for libraries such as Qt Multimedia who would
like to check the current permission status, but without
needing to request any permission of its own.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: Ic2a43e1a0c45a91df6101020639f473ffd9454cc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add support for enabling -fwasm-exceptions at compile and
link time, which enables use of C++ exceptions.
Wasm-exceptions is an in-progress roadmap item (see
https://webassembly.org/roadmap/), but is supported
by the major browsers
Change-Id: I6e2847206a46ed8038320c99725bc09a0344d1b4
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When creating the syncqt custom target we only check if the
WARNINGS_ARE_ERRORS variable is set. But the warnings-are-errors
feature can be disabled using the QT_SKIP_WARNINGS_ARE_ERRORS
target property. Add the genex condition to opt out the
'-warningsAreErrors' argument using the QT_SKIP_WARNINGS_ARE_ERRORS
property.
Change-Id: I8e6f89453500335c2b31e6e69c65b351c79dddc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring a qtbase developer build, WARNINGS_ARE_ERRORS is
set to ON and -Werror flags are added to the PlatformInternal
targets. But the value of WARNINGS_ARE_ERRORS is not exported.
This means that CMake code can't make decisions based on that variable
when building other repos, and we now have such code with the new
syncqt.cpp in qt_internal_target_sync_headers.
Export the value of WARNINGS_ARE_ERRORS in
QtBuildInternalsExtra.cmake.in.
Fixes: QTBUG-108151
Change-Id: I5de2633fcb1f20fead7d436c201852424e726842
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Process the regular SOURCES and DBus sources the same way in
the qt_internal_extend_target call. Previously the specified
COMPILE_FLAGS had no effect on DBus sources.
[ChangeLog][General] The internal DBus source files that are
generated, now are compiled with the same set of compilation
flags and options as other source files of the Qt module.
Change-Id: I9bdeb8f45c6af1b0cb0235425b0ff7efcb952d59
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extract function arguments to the corresponding variables and use
variables when parsing arguments. Remove whitespace between if keyword
and parentheses. Adjust size of code lines. Document function-specific
arguments.
Change-Id: I1c77fbf268618a844726683768575aff05894c70
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is a level A SIC, as it breaks
QFile f = "/some/path";
In general, it's not a good idea to have this implicit conversion. A
QFile is not a representation of a path, so the conversion should be
explicit.
I am going to keep the current semantics (implicit conversion) up to and
including Qt 6.8 (LTS). Starting from 6.9, the constructor will be
unconditionally explicit. This is deliberate, and done in order to make
users fix their code while staying in Qt 6, rather than encountering
this issue (and countless many more) if and when they upgrade from Qt 6
to Qt 7. In the meanwhile, users can opt-in to the new semantics by
defining a macro.
[ChangeLog][QtCore][QFile] The QFile constructors that take a path are
going to become unconditionally `explicit` in Qt 6.9. Code like `QFile f
= "/path";` will need to be ported to equivalent one (e.g. `QFile
f{"/path/"}`). This has been done in order to prevent a category of
mistakes when passing strings or paths to functions that actually take a
QFile. Users can opt-in to this change even before Qt 6.9 by defining
the QT_EXPLICIT_QFILE_CONSTRUCTION_FROM_PATH macro before including any
Qt header.
Change-Id: I065a09b9ce5d24c352664df0d48776545f6a0d8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It might not matter as far as I understand, but having it saved as BOOL
is better if it's a boolean.
Change-Id: If35485425257ca5518f0f8a49ca5353b9ac875a8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
FindWrapSystemMd4c now uses `find_package_handle_standard_args` like
all the other similar modules. This also fixes a case where CMake config
log for finding `md4c` was missing the CMAKE_MESSAGE_CONTEXT,
e.g., `[QtBase]`, which was caused by using `find_package` and let it
log outside the scope of the project, and not `QUIET`ing it.
In addition, the `CONFIG` parameter of the `find_package` was removed to
avoid unexpected issues when 3rd party package managers were used.
Change-Id: Id0bee436e8965452f9089c0e8c8793c3f1b63f02
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some modules may have header files that do not pass headersclean check
under some conditions. It's nice to have an option in the
qt_internal_add_module function to disable the check for the modules of
this kind. At the moment this flag is useful for the ActiveQt module,
since it syncs and installs header files that don't belong to it.
Amends b89d63515b
Task-number: QTBUG-103196
Change-Id: I21a82d50d50bdac225ed483ab0cc50339c2a4873
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since QtAutoDetect is called before the project, we still don't have
access to our IOS, WATCHOS, TVOS variables, and we must use
CMAKE_SYSTEM_NAME variable instead.
Pick-to: 6.4
Change-Id: I61afe216baec85b3fcd489957f4b6774134f8078
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In addition, I simplified some of the routines as we don't need the
extra check for them.
Task-number: QTBUG-107903
Pick-to: 6.4
Change-Id: Idaf6ab1338a54bc1a9f242fcc8400ae200174beb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Each module now identifies its actions during the configuration by a
prefix, e.g., `[QtBase]`. In addition,
- I have slightly modified some of the `message()` commands to get
a more coherent output.
- `syncqt.cpp` prints its output as WARNING if any
Change-Id: I3922d75a668d94f402068f4121751b7fcb6522b4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
From CMake 3.7 both flavors of `cmake_parse_arguments` are natively
available in CMake, and loading the
`CMakeParseArguments` module is not needed anymore.
Fixes: QTBUG-107574
Pick-to: 6.4
Change-Id: I7c8a6c5871cdb2f92a4aa43932b6f2ee99e1f57f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
As stated in `QtBuildInternalsConfig.cmake`, `cmake_minimum_required`
versions should be synced with `qtbase/.cmake.conf`, but it wasn't at
the moment.
Change-Id: I8100370778707d46abe973b681fd4aba182a7513
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid using top-level ${target} variable in the function. Align the
module's '_header_check_exceptions' file name, so it should use
_qt_module_interface_name property, but not the qt_module_include_name
proeprty as the prefix.
Amends b89d63515b
Task-number: QTBUG-87480
Change-Id: I1a3ceee1a29f2f4a7cb727310b4fdac63d8144e1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We currently don't have any machinery for qmake or CMake to map
translations declared via TRANSLATIONS += or qt_add_translations
to the Info.plist CFBundleLocalizations key.
This results in macOS and iOS falling back to the development region,
CFBundleDevelopmentRegion, as the only supported localization of the
app, which is in most cases set to 'en'.
Unfortunately this doesn't work well with the behavior of iOS 11+
and macOS 10.13+ where the OS will set the locale of the app to
the best match between the app's supported localizations and the
user's preferred language.
https://developer.apple.com/library/archive/qa/qa1828/
Since we only support a single localization, the development region,
the locale always ends up as 'en_<REGION>', which after QTBUG-104930
is also reflected in the QLocale's uiLanguages(), resulting in the
QTranslator machinery always picking English translation for the app.
As long as we don't explicitly declare CFBundleLocalizations we need
to opt out of the system's behavior of finding the best match between
the app's declared localizations and the user's preferences, which we
can do via the CFBundleAllowMixedLocalizations key.
Fixes: QTBUG-63324
Pick-to: 6.4
Change-Id: If7586d342148cbbb1d2a152cef039aad4448b13c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is consistent with what $(DEVELOPMENT_LANGUAGE) reports, as well as
the Apple Locales Programming Guide which states that "Locale names such
as “English”, “French”, and “Japanese” are deprecated in OS X and are
supported solely for backward compatibility."
Pick-to: 6.4
Change-Id: I99779d678ef9d4ea90249572f2f977e9b4df6c62
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Changed `proviude` to `provide`, and removed an extra space in a `xcrun`
command.
Change-Id: Iccbf6f87b9f4c86b686a6b1d0723458a1387a7ea
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add Qt configure feature for enabling WebAssembly SIMD usage:
./configure ... -feature-wasm-simd128
Enabling this feature makes Qt add the -msimd128 flag to
the compile options, which enables SIMD instruction usage
for the compiler.
(This should not be confused with the previously added SSE
SIMD support, which uses Emscripten's support for translating
SSE SIMD to WASM SIMD)
Change-Id: I84a36ccef8abf9199c304d68ce371c6b1747b832
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The default Windows SDK installed for VC++ 2022 is 10.0.19041, and still
has the issue described here, breaking builds if -Zcpreprocessor is set:
https://developercommunity.visualstudio.com/t/stdc17-generates-warning-compiling-windowsh/1249671
The issue might be fixed in SDK version 2104 (10.0.20348.0), but until
that is the default SDK when installing the compiler, turn that
conformance check off again.
Partially reverts commit 8cb832090a
Change-Id: Ib22f8d196b978274ce31be727826b902e79aaa99
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
/Zc:lambda seems buggy. Although in my experiments it works well
for 99% Qt repos, it seems some tests will trigger the bug and it
also blocks some new commits. So disable it for now, it's not stable
enough.
Now that this check is disabled, the workaround for tst_qstringapisymmetry
is also not needed anymore, so remove the workaround as well.
Partially reverts commit 8cb832090a
Change-Id: Icf0ecbbaa6262522470e5f5dea05705985ab18f1
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
For the full list, please refer to [1].
Needed to change the qstringapisymmetry unit test:
In theory we don't need the array to be static and it did compile
without any problems so far, indeed. However, with this patch applied,
MSVC complains that the lambda function below can't access the array.
I don't understand why, because we use [&] in the lambda and it should
capture all the variables in theory, but in reality it failed to
capture this variable in the end. And making the variable static
solves this issue. Maybe it's a MSVC bug.
Already tested locally. Most Qt repos build without any issues,
only very few repos are not tested, as my local environment
can't build them.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/zc-conformance?view=msvc-170
Change-Id: I658427aa171ee1ae26610d0c68640b2f50789f15
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
On Apple Silicon, Homebrew is installed under `/opt/homebrew` instead of
`/usr/local`, so I made a minor change clarifying this.
Change-Id: Ifccb51325339f80f8ed3c2a4f8acab485686af7e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These were mostly identical. Use the base clang config
and then specialize for Emscripten in a separate section.
Behavior changes: QT_CFLAGS_OPTIMIZE_SIZE is now -Oz instead
of -Os. Emscripten does not allow -Og, replace that flag
with -O2 -g.
Change-Id: I08163551ad6b84377b99f287983cc1191521055c
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
Currently, emrun will pick the browser to run tests on somewhat
arbitrarily. For predictability and stability, we should use one
browser as a basis, and Chrome seems to be a good fit as wasm features
are generally in good shape on it and it has good support for launching
from command-line.
Change-Id: I1d06a5916ad24ab9df9b0826c0773c652e6d3fcd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
We aim to allow building Qt for Android on one host, and make it
usable on any host.
Previously when built on a Windows host, we embedded windows style
paths into the android -dependencies.xml files, which caused
androideployqt to fail deployment when building a project on a unix
host.
In Qt 5, the dependencies xml files for Windows Android packages had
unix style paths. Thus switch to always using unix styles paths on
all platforms.
Amends a9d2c5b6d7.
Fixes: QTBUG-107249
Change-Id: I851d3e0b08415b4c7f0d22baf43c10c715879ee7
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Several new headers were extracted from qglobal.h in scope of
QTBUG-99313. This commit makes sure that none of them actually includes
qglobal.h.
As those files are new, it should be safe to introduce this change, as
it shouldn't have any impact on the user code.
This patch also modifies the autogenerated module exports header to
include qglobal.h before the include guard. This is needed to prevent
circular dependencies which result in Q_<MODULE>_EXPORT being
undefined.
Task-number: QTBUG-107046
Change-Id: I8d998792fd8129173d9ec811557e7d7604282813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the -warningsAreErrors command line argument to syncqt.cpp that
causes a fail at build step if any of header files doesn't fit the
syncqt standards. The argument reflects the WARNIGS_ARE_ERRORS CMake
variable state.
Output the syncqt.cpp warnings at configure time.
Fix the faulty positive IncludeChecks failure flag.
Task-number: QTBUG-107088
Change-Id: Id30af4c7b78fd44c1c99c7e9306965d03a0f992d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise, qmake won't work if the host Qt was built with custom
INSTALL_BINDIR and friends.
Pick-to: 6.4
Task-number: QTBUG-106712
Change-Id: I436103efc21f245cc220f4706adcab369feba836
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The target_qt.conf file contained a wrong HostData value if the
effective data dirs were set to paths of different levels in the host
and target Qt builds. Fix this by computing the relative path from the
mkspec dir's parent to the ext prefix' data dir.
Note that qmake's HostData dir is the root directory of the mkspecs
directory.
Pick-to: 6.4
Task-number: QTBUG-106712
Change-Id: Id8c9de925f5ff51901677b7218621747169a5cec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Wasm doesn't play well with these baseline tests in general,
so we can disable them for now.
Pick-to: 6.4
Change-Id: I5a66a932449c8934d88b94e419aae5ddcc89ee78
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
syncqt.pl adds an extra dependency on perl when building Qt. Modern C++
provides the convenient cross-platform way to access a filesystem and
to use regular expressions, so we may replace the perl script with C++
application. The syncqt executable is built at configure time and
installed as QtCore tool. It's running at configure time to deliver the
required header files for IDE to build a consistent code model and at
the build time to keep tracking changes in header files and generate
the missing aliases without reconfiguring. 'syncqt' only parses header
files from a CMake build tree, so the resulting Qt installation only
contains interfacing headers that belong to the platform that Qt is
built for. 'sync.profile' files are not used as the 'source of truth'
for sync qt procedure anymore, all the necessary information is taken
from either CMake files at configure time or from the module header
files while parsing them.
syncqt.pl is still in place since it's required as fallback solution
for a smooth transition to the new syncqt implementation for all qt
repositories.
This patchset only enables the C++ based syncqt for 'qtbase'
repository.
From the performance perspective C++ version works faster then perl
script, also the configure time is reduced significally on subsequent
reconfigurations - up x2 times faster when re-configuring repository,
but it also takes time to compile the tool itself the first time.
Numbers for qtbase:
syncqt.pl syncqt.cpp
initial: 0m16,035s 0m20,413s
reconfig: 0m6,819s 0m3,725s
The syncing procedure can be run separately for each module using
<ModuleName>_sync_headers targets. The 'sync_headers' target can be
used to sync all the modules at once.
Task-number: QTBUG-87480
Task-number: QTBUG-103196
Change-Id: I8c938bcaf88a8713b39bbfd66d9e7ef12b2c3523
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid the 'file' command shadowing by a variable and use file name when
filtering header files by type.
Amends 8539e641f6
Task-number: QTBUG-103196
Change-Id: If012975efafaf119cffbd89baf84df334bc057ac
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use PARSE_ARGV signature of the cmake_parse_arguments function to avoid
escaping of semicolons when passing arguments to the
qt_internal_add_configure_time_tool and
qt_internal_add_configure_time_executable function.
Amends ac74b60c9c
Task-number: QTBUG-87480
Change-Id: I343abbd75107e56aaccab6e388db8dbda0525af3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The function does the same as the original one but respects semicolons
in CONTENT argument due to the use of the cmake_parse_arguments variant
with PARSE_ARGV.
Change-Id: I263662dc18e411a735b586995b82791fc6b888ea
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We already have:
a, a timeout as part of QtTest. By default it lets each test function
run for 5 minutes. This timeout can be configured using
QTEST_FUNCTION_TIMEOUT.
b, maxTimeBetweenOutput in the CI. The CI will kill the process if too
much time passes between individual output lines of a test.
c, maxTimeInSeconds in the CI. This does exactly the same as the
androidtestrunner timeout.
The CI timeouts can be centrally tuned per platform and Qt module. This
is preferable over a special timeout just for android.
As other people may be using androidtestrunner for unrelated projects,
don't delete the timeout, but simply disable it from CMake by setting
it to -1.
Task-number: QTBUG-106479
Task-number: QTBUG-101596
Task-number: QTBUG-100242
Change-Id: If4ce00948e204182bb12ac4859d3b0dd193de7ad
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This reflects the true state of exceptions on WASM, which are always
disabled (DISABLE_EXCEPTION_CATCHING is always set with 1).
Change-Id: I7b681846159caf61f291f78a7b4ddf5260dc341f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make cmake changes that have ctest run the emrun test runner for
all tests that are build for wasm.
Change-Id: I8c07068d79cfd0d745dbcc3d3f025c7c48fe1069
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
_qt_is_test_executable can only be set on a test that is backed by a
real target. QMLTESTs might not backed by an executable target, if
they are missing cpp SOURCES.
Which led to errors like
CMake Error at
cmake/QtTestHelpers.cmake:510
(set_target_properties):
set_target_properties Can not find target to add properties to:
textedit
Call Stack (most recent call first):
tests/auto/qmltest/textedit/CMakeLists.txt:10 (qt_internal_add_test)
Amends 62c681a599
Change-Id: Ie66fd3e94484562061f851c0a034629959d091da
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
QCore::applicationName() is influenced by what values we insert into
the Info.plist file of an application bundle.
We accidentally inserted tokens like ${PRODUCT_NAME} that are meant to
be expanded by xcodebuild, even when using a generator like Ninja.
This caused the applicationName() to report "${PRODUCT_NAME}".
Make sure to only call relevant finalizers for macOS applications
when using a generator other than Xcode.
Amends d5580aa719
Pick-to: 6.4 6.4.0
Fixes: QTBUG-106652
Change-Id: Idbc9c84557a8f17b1302e6969f6eb317e3ef225d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is needed to later determine what kind of runner should be
selected on WASM for the executable. Tests use the test runner,
whereas other executables use qtLoader.
Change-Id: I75aa361403b72f8e82a288967b8a81b8232d68dc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The _qt_internal_wrap_tool_command function has a limitation
that it is not possible to use it when a command needs to be wrapper
in a generator expression.
Provide a lower level API called
_qt_internal_get_tool_wrapper_script_path
to just get the path to the wrapper script, ensuring that the script
is created if needed.
Deprecate _qt_internal_wrap_tool_command, in favor of replacing it
with the new API.
Pick-to: 6.4
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: Ie4a4a17178bf2061ae01ee2b03b052d84560abf9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Instead of creating the tool wrapper shell script only
during a Qt build in QtBuild.cmake,
ensure it is created any time _qt_internal_wrap_tool_command is
called, regardless if we're building Qt or a user project.
As a transitional period not to break compatibility, we also need
to create the script in QtBuild.cmake, until all usages of
QT_TOOL_COMMAND_WRAPPER_PATH are replaced with function calls.
Currently such usages are present in qtdeclarative.
When considering which bin dirs to add to the script's PATH
environment variable assignment, in addition to the build
internals relative bin dir, also add QT_BUILD_DIR,
QT_ADDITIONAL_PACKAGES_PREFIX_PATH and QT6_INSTALL_PREFIX.
QT_BUILD_DIR is important so we always pick up the just-built
but not installed libraries in a prefix build when running just-built
tools.
QT_ADDITIONAL_PACKAGES_PREFIX_PATH is important when building examples
as ExternalProjects in prefix builds, to ensure that the
not-yet-installed tools and libraries are picked up from the repo
build dir, which is passed via QT_ADDITIONAL_PACKAGES_PREFIX_PATH
to the external projects.
QT6_INSTALL_PREFIX is there in case if the build internals relative
dir is located in a different places than the Qt6 package.
Pick-to: 6.4
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I4d76fbbc275ca961379971054f87991adac36539
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Move it into QtPublicCMakeHelpers.cmake so it is available also when
configuring qtbase and the Qt6Config.cmake file is not yet loaded.
Pick-to: 6.4
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I88127fe0439ae26af1d125eb584244d315574a48
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Move it out of QtConfig.cmake.in into QtPublicCMakeHelpers.cmake
so that the Qt6Config file is less cluttered.
Pick-to: 6.4
Change-Id: I772a0cca35d5c03cd688c3f1de34984484444105
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Before this change, qt_deploy_runtime_dependencies supported Windows and
macOS only. We add a generic deployment method implemented in
cmake-language with file(GET_RUNTIME_DEPENDENCIES). This deployment
method is now enabled for shared builds on Linux.
The file(GRD) command requires that the EXECUTABLE argument points to
the executable in the build directory.
Only libraries in Qt's installation directory are considered for
deployment. This includes Qt's own libraries and also things like
libicu*.so we're shipping with the installer.
Unlike macdeployqt and windeployqt, the generic
qt_deploy_runtime_dependencies does not yet support deploying
translations. We will catch up on this in a later commit.
Change-Id: Iea23abcdba774d4c1885c8d2c243eb3e48fb7fae
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The change b515fa56a3
introduced checking the emsdk version of a qt installation.
However, this checked for QT6_INSTALL_PREFIX where it may not be
defined. This fails when trying to build tests because
when configuring tests, it calls into add_target_helpers which
calls into this logic, and QT6_INSTALL_PREFIX is set after
this is called into, causing the qconfig.h lookup to fail.
To fix this so it works in all conditions,
we need to check if either install prefix or
build_dir is set and use whichever is set.
Pick-to: 6.4
Change-Id: I3cf7e20d3d830f04e5b632fc51d8bf3b2758a717
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_configure_time_executable compiles the executable
at configure time and exposes it to the CMake source tree. This is
useful when need to run a small C++ program at configure time.
Task-number: QTBUG-87480
Change-Id: I031efe797c8afa0721d75b46d4f36f67276bf46e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
<module>-config[-p].h files need to be added to the CMake source tree
Amends 8539e641f6
Task-number: QTBUG-103196
Change-Id: I8baaa672ad869da8a030d890da8bdea5bd8c7794
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This spams the console with "writeStackCookie"/"checkStackCookie"
messages, which makes finding relevant debug output harder.
Pick-to: 6.4
Change-Id: I352b633f02f9ecc1333d1d91f5ffc21a4a937e53
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Avoid adding module header files to a PUBLIC/PRIVATE_HEADER for the
modules. All header files are installed using install(FILES call, but
not as a part of install(TARGET
Amends 8539e641f6
Task-number: QTBUG-103196
Change-Id: Ib95295112c74f74f237e3738d2532f9049d26ce6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If Qt itself is built without the deprecated APIs, so should be the
tools and apps.
This patch makes sure that the specified QT_DISABLE_DEPRECATED_UP_TO
and QT_WARN_DEPRECATED_UP_TO values are correctly used in the internal
tools and apps.
Fixes: QTBUG-105102
Change-Id: I7a51bddbd839c7b71efa0bff8ec959df64c53b82
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use CMake source tree when installing header files instead installing
all header files that syncqt.pl produces. This avoid adding header
files which cannot be used because of platform or feature
incompatibility with Qt version. Since syncqt.pl doesn't respect CMake
build tree when generating master header and CaMeL case header files,
these header files still will be installed regardless platform or
feature limitations. This will not be the case once we switch to
syncqt.cpp, which will install only headers that are relevant to the
selected platform and enabled features.
Task-number: QTBUG-103196
Change-Id: I7d64754648747bee700d96f2fd6228fe7248512e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If Qt itself is built without the deprecated APIs, but the tests are
not, tests will fail to compile and/or link.
This patch makes sure that the specified QT_DISABLE_DEPRECATED_UP_TO
and QT_WARN_DEPRECATED_UP_TO values are correctly used in the tests.
The definitions are propagated to tests, batched tests, manual tests
and benchmarks.
Fixes: QTBUG-104858
Change-Id: Idf15accaf96c47599084426ba625b985f507ca8b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Suppress the pthreads-mem-growth warning for developer builds.
We (the Qt developers) are aware of the issue, so we don't
need the reminder.
Change-Id: Ib924a4dd87b8647d5f1052ab40c0ddf4b9f42108
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The feature does not exist. Do not query for it and assume it's always
off for the purpose of WASM build.
Change-Id: I7e76242c9b3423bfe16872f668c60dae2e74fabe
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
DISABLE_EXCEPTION_CATCHING is added unconditionally on WASM. Add
NO_EXCEPTIONS for all WASM tests since those are never supported.
Change-Id: I2ee10779e7ae0d285494ad650be52dee3099915a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This way it is able to pick up all of the properties assigned to it
before finalization.
Change-Id: I9da635f8620859a669c4e4d589fff56a3ce42ab9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replace hardcoded Qt6 prefix of module tools target when setting
the name of tools package.
Change-Id: Icb6f38cce766c9d32216a65a8a5ce9552d622b72
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
