Commit Graph

5661 Commits

Author SHA1 Message Date
Laszlo Agocs
f3fad26bc9 Add matching by GL_VENDOR to QOpenGLConfig
This will be essential on Linux, especially Embedded where PCI IDs are
not that useful.

Change-Id: I2fa8ca07236e8aae203e21fe629d12aab092c7fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
2015-04-16 16:47:43 +00:00
Allan Sandfeld Jensen
7432c7c08a Cleanup and optimization of qimage smoothscale
Cleaning up smoothscale code. Upscaling is improved using existing
optimized interpolation methods, and downscale is given SSE4.1
optimized versions.

Change-Id: I7cdc256c26850948aef7dae26fda1622be6b8179
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
2015-04-15 11:25:41 +00:00
Robert Griebl
91dfab223a Add support for unregistering of custom meta types.
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).

The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.

Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
2015-04-14 23:29:04 +00:00
Erik Verbruggen
b2f6406b6f QStateMachine: remove conflicting transitions after selection.
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.

For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).

This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.

A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.

[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.

Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
2015-04-10 12:59:52 +00:00
Erik Verbruggen
e616bd2641 QStateMachine: fix history state restoration.
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.

The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.

Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm

[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.

Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
2015-04-10 12:59:20 +00:00
Andy Shaw
34ec0713bb Add a means to set the application icon where supported
On OS X the application icon can be changed at runtime, so this adds a way
to set this via the QPlatformIntegration.

[ChangeLog][OS X] QApplication::setWindowIcon now changes the icon for the
application in the dock.

Task-number: QTBUG-43999
Change-Id: Ice298c0bd52f10f4866f37c6d3f20cf5419b7a1b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
2015-04-10 10:10:25 +00:00
Thiago Macieira
28dfda5d1f Remove the old headersclean unit test
We have configure -headersclean now

Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-04-10 06:34:06 +00:00
Kai Koehne
a60571b370 QSaveFile: Fix permissions on creation
QSaveFile is intended to be a replacement for QFile, and should use the
same permissions for newly created files. QTemporaryFile however creates
new files with 0600 mask by default.

Fix this by making the mode_t argument QTemporaryFileEngine uses
configurable, and using 0666 for QSaveFile (like we do in QFile).

[ChangeLog][Important behavior changes] Files created by QSaveFile do
now have the same rights as files created by QFile. This also fixes a
regression in QSettings: In the Qt 5.4 series, new files created by
QSettings were only readable by the current user.

Task-number: QTBUG-44086
Change-Id: Ie1cc20e9f25c6e72e1bc9176490c419c27c5fc82
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
2015-04-08 07:48:17 +00:00
Konstantin Ritt
95d034a14f Introduce QQuaternion::fromDirection()
...which constructs a quaternion using specified forward and upward
directions, so that the resulting Z axis "faces" a given forward direction.

Change-Id: Ib77b8ab5c359a4880b0d946face87026acdc6f0b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Michael Krasnyk <michael.krasnyk@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-04-07 13:07:48 +00:00
Kai Koehne
1db3de6a1e QVLA: Add operator= for initializer lists
Add a dedicated operator=(std::initializer_list) that
first resizes the QCLA, and then replaces the elements
one by one.

This should be usually faster than creating a temporary
QCLA and then copying it, except for the case where the
new array does not fit into the allocated stack - but this
is IMO nothing to optimize for.

Task-number: QTBUG-45041
Change-Id: I147d6d01186b1ca3c635b2c8365d8f6e638ce6fe
GPush-Base: 08de3113051e1289f0de0651ec5647c9ee6feb27
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-04-04 15:48:13 +00:00
David Faure
5aa40e5b00 QComboBox: also adjust size on model reset, with AdjustToContents
When the size adjust policy is QComboBox::AdjustToContents, the combobox
sizeHint was recalculated on dataChanged, rowsInserted, rowsRemoved,
and setModel, but not when the model was reset. This led to truncated
items in the combobox when models are filled asynchronously.

Task-number: QTBUG-5413
Change-Id: I3456c327d680dfffa58d6dcb26c79456c67b2a32
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
2015-04-04 12:24:44 +00:00
Alex Trotsenko
f40cf77b0f QIODevice: do not change the 'pos' member for sequential devices
Concept of 'current position' exists only for random-access devices.
As documented, for sequential devices QIODevice::pos() must always
return 0. Prevent a modification of the internal 'pos' member in
QIODevice::readAll() method to follow this rule.

Change-Id: Ida2ee6a629ccfc3068d62f95ab1064ada13fdda5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-04-04 08:40:01 +00:00
Marc Mutz
1b109967c5 QUuid: add missing relational operators
QUuid has ==, !=, <, and >. Add <= and =>, too.

Change-Id: I11a0b8028be766e2d48dc7664d935df4d327b3d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-04-04 06:40:27 +00:00
Caroline Chao
3ed6f74fb2 Tests: Blacklist tests for ubuntu 14.04
Instead of making insignificant the all platform for
QtBase 5.5 integration.

Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
2015-04-01 13:59:04 +00:00
Liang Qi
26a9783d55 Merge "Merge remote-tracking branch 'origin/5.4' into 5.5" into refs/staging/5.5 2015-04-01 11:27:03 +00:00
Liang Qi
ce9519593a Merge remote-tracking branch 'origin/5.4' into 5.5
Conflicts:
	mkspecs/android-g++/qmake.conf
	qmake/generators/unix/unixmake2.cpp
	src/gui/image/qimage_conversions.cpp

Change-Id: Ib76264b8c2d29a0228438ec02bd97d4b97545be0
2015-03-31 10:03:31 +02:00
Thiago Macieira
9212244294 Fix running of dbus-send on some systems
It was printing the following error:

arguments to dbus_validate_bus_name() were incorrect, assertion "name !=
NULL" failed in file dbus-syntax.c line 248.
This is normally a bug in some application using the D-Bus library.

Change-Id: Iee8cbc07c4434ce9b560ffff13d0586189ba3a79
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
2015-03-31 05:55:55 +00:00
Laszlo Agocs
2266f51922 Fix incorrect FBO bindings with QOpenGLWidget
QOpenGLContext::defaultFramebufferObject() knows nothing about QOpenGLWidget
and QQuickWidget. The problem is that this function (and others that rely on it)
is expected to give the widget's backing FBO in paintGL() and friends.

To overcome this, we have to provide a way for such widgets that indicate what is
the expected "default fbo".

Task-number: QTBUG-43269
Change-Id: I43f439f8609382b9f7004707ab0ef9f091952b4f
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
2015-03-30 20:48:07 +00:00
Caroline Chao
096ac429e7 Tests: remove insignificant flag for dbus tests on osx
Tests are now passing in CI.

Change-Id: I0051fb7070c1c1027c557eba9dde6367ad59ac7a
Task-number: QTQAINFRA-837
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-27 18:37:30 +00:00
Konstantin Ritt
d8a0b97f60 Update CLDR to v27
+ A bunch of fixes in the locale data
+ New scripts from Unicode 7.0
+ New locales
- Some locales disappeared (aa_DJ, aa_ER, st_LS, ss_SZ, swc_CD, tn_BW)
- Some locales lost their contents (i.e. en_Dsrt_US)

[ChangeLog][QtCore] QLocale data updated to CLDR v.27

Change-Id: Iba8c7884f8087e577cbb25a8fc106dd7bd3ebb5d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-03-27 16:40:16 +00:00
Konstantin Ritt
7946b83ace [QLocaleData] Extract defaultContent locales
This adds some locales missing in the common/main/ directory, namely:
  bss_CM, cch_NG, dv_MV, gaa_GH, gez_ET, ha_Arab_NG, iu_Cans_CA, kaj_NG,
  kcg_NG, kpe_LR, ku_Latn_TR, mi_NZ, ms_Arab_MY, mn_Mong_CN, nds_DE,
  ny_MW, oc_FR, sa_IN, sid_ET, tk_Latn_TM, trv_TW, tt_RU, ug_Arab_CN,
  wa_BE, wo_Latn_SN

See http://www.unicode.org/reports/tr35/tr35-info.html#Default_Content
for more info.

Change-Id: I6b3082d370a21da64fbd5e72ab6344e1d7a6a3c9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-03-27 16:40:13 +00:00
Konstantin Ritt
dec451cf67 Update Unicode data up to v7.0
* Two newly adopted currency symbols:
  the Azerbaijan manat and the Russia ruble
* Pictographic symbols (including many emoji), geometric symbols,
  arrows, and ornaments originating from the Wingdings and Webdings sets
* Twenty-three new lesser-used and historic scripts
  extending support for written languages of North America, China, India,
  other Asian countries, and Africa
* Letters used in Teuthonista and other transcriptional systems,
  and a new notational set, Duployan

For more details, see http://www.unicode.org/versions/Unicode7.0.0/

The Properties struct's .*Diff members were narrowed down
to signed 15 bits and the unicodeVersion has been expanded to 8 bits.

[ChangeLog][QtCore] Unicode data updated to v.7.0

Change-Id: I93ab6f79fa3b05f61abc7279f1d046834c1c1a0b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-03-27 16:40:06 +00:00
Konstantin Ritt
ecdd5648bd Update UCD source files to v7.0
Change-Id: I47277963c926128ad0c4ac5141835e767bb440a7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-03-27 16:39:53 +00:00
Joni Poikelin
fa3985ab22 Do not emit textEdited on inputMask change
Task-number: QTBUG-1266
Change-Id: Ib2f1db15be876c1d6713bd7c28c2b91006b3b2d4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
2015-03-27 12:55:57 +00:00
Thiago Macieira
7b2a1aec03 tst_QDnsLookup: Use a different character from space in TXT multi
When in commit db15341d27 I added support
for testing TXT, I used the space character to make it easy to
concatenate the records. Unfortunately, that means it's easy to false-
positive the test by creating one record with a single entry containing
a space instead of two entries.

So use the NULL character instead.

Change-Id: Ia0aac2f09e9245339951ffff13c7d239ea83583d
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
2015-03-26 06:11:17 +00:00
Thiago Macieira
e1c99e15b6 Update strtoll and strtoull from upstream FreeBSD
There appears to be at least one fix, related to sign- or zero-extension
in the call to isspace(). So it's a good idea to update again. This also
brings the behavior to match strtoll and strtoull on Linux, including
the fact that strtoull will parse negative numbers. For that reason,
qstrtoll and qstrtoull are now wrappers that try and keep the behavior
that we used to have.

This update also changes the code from a 4-clause BSD license (bad) to a
3-clause BSD license (good).

Change-Id: I73b01b02ebd1551bf924599d52284ad25cc1def0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-03-26 06:11:14 +00:00
Andy Shaw
2e4a107e7e Ensure that CSS rules are inherited from the parent tags
When CSS is set in a head tag then it was not being inherited by the child
tags when the CSS specification indicates that the properties are in fact
inherited. This ensures that those properties are inherited and the non
inheritable ones are unchanged.

A test is added to cover the different situations with inheritance and a
fix is done for the QTextDocumentFragment test which was passing despite
having incorrect defaults.

Task-number: QTBUG-28770
Task-number: QTBUG-34153
Change-Id: I55966240845a885852a04ecb82c61926dea9f800
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
2015-03-25 11:55:47 +00:00
Frederik Gladhorn
0bd06bd9bd Fix building test qpluginloader/machtest against installed qtbase
When building the test while qtbase has been installed and the
build dir was removed, the include paths were not found in
frameworks builds.

Change-Id: I32d9e61176a5e19c86095580ddad6914f25ff952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-03-25 10:03:38 +00:00
Friedemann Kleint
e1ce8dca16 Fix build of the manual dialog test with Qt 4.
Change-Id: If2b0ae9842ebc2795168d2c50934b8a87006544b
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
2015-03-25 09:51:28 +00:00
Boris Dušek
76c94be4e7 OS X Accessibility: Make checkboxes etc. checkable with VoiceOver
NSAccessibility has no explicit analog for
QAccessibleActionInterface::toggleAction(), checking checkboxes/radio
buttons is handled by NSAccessibilityPressAction. So ensure exposing
the action properly on OS X so that VoiceOver users can check/uncheck
checkboxes, select radio buttons etc.

Change-Id: Idc8b048de2313a3e875a929516baf3dded9c68cc
Task-number: QTBUG-44852
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
2015-03-25 09:48:43 +00:00
Boris Dušek
c37f2e8e45 Add string range tests to qaccessibilitymac
Change-Id: I099502d4948194d934ace1fabc5e3ce14f663eb9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
2015-03-25 09:48:35 +00:00
Boris Dušek
da3dbc45f3 Refactoring of qaccessibilitymac test
In order to support testing values of more accessibility attributes
and parameterized attributed, we provided some "infrastructure" to be
able to query them with minimal effort. We also reworked current 6
supported attributes to use this new way.

Change-Id: Id0ceb59aa0fe063c9aedad27cffcc3aef0899d7f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
2015-03-25 09:48:27 +00:00
Boris Dušek
551f39bac5 Fix accessibility character rect tests
textEditTest in qaccessibility test was using QTextEdit::setCurrentFont
on second pass, but that did not change the font used for text in any way.
I don't know what was the purpose. So I changed it into something that
made sense to me and actually tests text with a different font on second pass.

Also fixed characterRect function in tests to use correct font/format.

Change-Id: I843c5b29f8048196ec3405b6717655e77b567dbb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
2015-03-25 09:47:52 +00:00
Boris Dušek
898ca6ff76 Fix tst_qaccessibility::textEditTest for some screen resolutions
On a high resolution display the test will potentially create a text
edit that introduces line breaks and these make it fail then.

Change-Id: I38807a9b3b511478a1742c4422a97c1cb3395a02
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
2015-03-25 09:47:40 +00:00
Boris Dušek
b465edbcab Support all underline types in accessibility
Change-Id: I9eccc66624f5d789cc8778d4376338207beb4a14
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
2015-03-25 09:47:17 +00:00
Morten Johan Sørvig
72854081b2 Add tests for detach on setDevicePixelRatio()
Change-Id: I414ff0b794e0202a7f8c931b59b973cb1e7dc148

Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
2015-03-24 11:22:36 +00:00
Pasi Petäjäjärvi
ddf6ac03cb Do not search test binary if QProcess is not supported.
Without QProcess support we do not run test which initTestCase is
trying to find.

Change-Id: Icecaad90f61a019489e372517a6d62372155bd46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-23 08:38:58 +00:00
Kai Koehne
d3659bf88b QVarLengthArray: Add initializer_list constructor
Implement an initializer_list constructor, which was probably
just forgotten so far. Technically this is a SC incompatible change,
since

  QVarLengthArray<int> array = {10};

will now create an array with one element 10, instead of an empty array
with a reserved size of 10. Anyhow, keeping the inconsistency with the
STL / other Qt containers here would certainly do more harm than good
in the long run.

Task-number: QTBUG-45047
Change-Id: I4675880f93e141181250939942fa32300916b0e3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
2015-03-23 08:13:42 +00:00
Konstantin Ritt
3cb2e0dd09 Clean-up tst_QChar
Since Qt 5.0, static overloads of QChar has a uint parameter only,
so there is no more ambiguity between uint<->ushort and thus some tests
does not make sense anymore; avoid explicit cast to uint for the others.

Change-Id: Ibc7a2ac4de63d3f023a8dbb5e53211ef8521579d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2015-03-23 07:01:27 +00:00
Frank Reininghaus
f1e9076809 Fix problems with extended selection after changing the model contents
Storing the position of the first selected item in the view can lead to
wrong extended selections if the contents of the model change. Future
Shift-clicks will always use the previous position of the first selected
item, which may not be correct any more, to calculate the current
selection.

To fix this problem, a QPersistentModelIndex is used to keep track of
the first selected item.

A new unit test is added. Moreover, one function of the QTableView unit
test is changed such that it shows the view prior to performing the
test. Without this change, this test may fail. That the test, which
simulates mouse presses without showing the view, worked at all seems
to be a coincidence, as pointed out in QTBUG-18009.

Task-number: QTBUG-18009
Change-Id: I0d844fbd1a994c279a7c8ee5d9b5b9fccecd25bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
2015-03-22 14:38:07 +00:00
Andy Shaw
b6c14bca65 MySQL: Fix test so it expects the right integer type
Change-Id: Idd90d7881c6458fac7602bf02dad0f794d3b98c9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
2015-03-20 13:51:34 +00:00
Andy Shaw
392d861790 MySQL: Keep the precision of the field when formatting the value
Change-Id: I4ab08be5112167a617d6d1d109754f2404a9605f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
2015-03-20 13:51:29 +00:00
Friedemann Kleint
3e503b197d Diaglib: Add gesture events to event filter.
Task-number: QTBUG-45134
Task-number: QTBUG-45120
Change-Id: I9b2420ec302dfff173fbc8e3173d6ef0fcf095e0
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
2015-03-20 12:27:21 +00:00
Eirik Aavitsland
d5c6335ff3 Fix rasterization errors in aliased cosmetic drawPolyLine
If a cosmetic polyline contained a 1-pixel segment, the next segment
would be drawn with wrong starting point.

The original fix for QTBUG-26156 had some unwanted side effects
(QTBUG-31579 and now QTBUG-42398). It tried to skip start-point update
if stroke() did not actually draw anything (because the segment was
too small). However, to determine that, it tested for a change in
lastPixel. But that was not failsafe; in some cases (1-pixel segment),
lastPixel could be unchanged even though the segment had been
drawn. With this change, we instead test directly whether stroke()
skipped the segment or not.

Task-number: QTBUG-42398
Change-Id: Id751db69a18cd1af4f45070db9d5698aa532d22a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
2015-03-19 09:01:08 +00:00
Andre Hartmann
e610ef8c8d QComboBox: Update completer on setCurrentIndex()
When the ComboBox currentText() was changed by key
LineUp or LineDown or mouse click, the completer still
contained the last inserted characters.

If now all text was selected (by Ctrl+A or selectAll()),
the old item and index was restored on next Enter press.

Task-number: QTBUG-41288
Change-Id: I6916fd31c8b8fbacfb12e1a62c3e46823cf918b4
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
2015-03-18 16:57:19 +00:00
Marko Kangas
ce97f37bff Fix tst_largefile QCOMPARE value types
Added casting to QT_OFF_T type. Otherwise fails on some
compilers.

Change-Id: I4f1f0c558af7d182a4babf38a7f048b27b3db611
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-18 13:35:40 +00:00
Lars Knoll
0411240fda Make sure remove() doesn't corrupt the json object
When using non latin keys, remove() could cause corruption
of the json object.

Task-number: QTBUG-42270
Change-Id: I7305e57ebb78630a9bf68bc4f831a6d1646abb79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-18 07:34:59 +00:00
Lars Knoll
124da60c1d Fix support for iso8859-16 when compiling with ICU
ICU doesn't support iso8859-16, so we need to fall back to
the Qt codec for this encoding.

Task-number: QTBUG-45053
Change-Id: I9754cf098c906fe8a75363a3d090029543cd0e35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-18 07:34:55 +00:00
Olivier Goffart
7c77013c7f Fix source incompatibility while connecting signals with forward declared arguments
QObject::connect tries to determine if the arguments are registered
metatypes. This used to work even for arguments that were forward
declared. But now, the metatype system tries to call
QtPrivate::IsQEnumHelper<T>::Value to know if it is registered.
That fails on gcc if T is forward declared.

Apparently gcc needs to know the full type of T to pass it in the
ellipsis function, even within a sizeof expression.

So change the ellipsis expression to a template one.

Task-number: QTBUG-44496
Change-Id: I7fa07bd3cde470b134c2ec53b0d581333d16a6f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-18 07:33:19 +00:00
Thiago Macieira
699e7a0869 Remove the tests for Ubuntu Oneiric (11.10)
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.

This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
	sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).

Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2015-03-17 01:26:13 +00:00