This commit re-enables support for OpenVG in Qt, but not in the
same way as in Qt 4.8. The first part is about adding a test
and using the new configure system to enable OpenVG.
There is still support code in Qt for setting up EGL to provide a
surface and context for rendering with the OpenVG API, this commit
enables a path to do so.
Normally to get access to an EGLContext from a QWindow you do so via
QOpenGLContext, but in setups without OpenGL but with EGL and OpenVG
this doesn't make sense (there would be no QOpenGLContext). So the
intended way is to use a QWindow to get an EGLSurface, then create
an EGLContext directly (without going through QPA).
Change-Id: I0f75aadbaa3cd006deb7e6fd12cfbb574870fba4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
this is complementary to configure's makeSpec library source type.
this should be sufficient to make QMAKE_USE += {egl,opengl,opengl_es2}
actually work, obsoleting the need for opengl.prf and egl.prf (and the
currently dysfunct openvg.prf).
Change-Id: I2f7595ac89afa087ea7f0f25060e8e47e6148be9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Pretty useful when working on Qt itself or just having to deploy
a proper hand-crafted latest greatest to the Yocto-built image.
[ChangeLog][Platform Specific Changes] Added support for
cross-compilation targeting Renesas R-Car H2 (Lager) systems.
Change-Id: Ie359956046b0752a6053f85b81d32550b91ce453
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
now the callbacks don't need to re-export the designated file contents,
which improves the abstraction and removes some boilerplate.
Change-Id: Ifa50313155fc96762025e2610b810ebb71daa373
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
otherwise it's sometimes quite hard to tell it apart from configure's
own messages.
Change-Id: I2f4908344367a9a3ce38e032bf76486fc4552ffd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this got broken in 2ad4d75754.
however, the new configure system operates from the top-level build dir
anyway, so there is no point in messing with the cache as a reference
point to start with - just use OUT_PWD.
Task-number: QTBUG-57120
Change-Id: I69629bf497931574bff8452939170abb1776ab60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
'use' entries in the tests and libraries sections of configure.json
files should work acrosss library boundaries, so a test in
qtwayland can refer to a library from qtbase.
Change-Id: Ide02b9985be427a27982a422ca84a29b23145bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
You can now use 'module.gui' to check whether the Qt Gui module
exists in the current build of Qt.
Task-number: QTBUG-56656
Change-Id: Ic73f162ed0578e07c70e3ec3706f285b6d09a41d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Windows cd does not change the drive. So when you are on drive C:
and type "cd D:\data" it will change the directory on drive D: but not
affect your current working directory.
To also change your drive you have to provide the parameter /d on
Windows, so "cd /d D:\data" will also change the drive.
Task-number: QTBUG-57080
Change-Id: Ib629879534523982eec693cef725f20a535a1a74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This strips leading whitespace from asset catalog filenames, which was
causing installation to fail due to incorrectly calculated paths.
Task-number: QTBUG-57090
Change-Id: I80db627262f9d58f4403e2d8ab205bef2113992b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this actually affects only non-framework Darwin builds - debug-only
framework builds are impossible, and Windows is always debug-and-release.
Change-Id: Ia79dbbefc5750168ebd8967fe4afbe173f55a0d6
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
they were already omitted from the console output; there is no need to
spam the log with them (their completion was not logged, either).
Change-Id: I32c97413d2e6ceb18ee61356855cc6a7fa2222bf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they have none.
Change-Id: I1e5ffa9960c4fac3c708be4820fb40e7909569c8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it is counterproductive to clear the log when cached test results are
used, as that makes it hard to determine how they came to be.
-recheck isn't as clear-cut as -recheck-all, as only part of the results
is discarded, and we can't reasonably discard only part of the log. i
opted for clearing the log entirely, as having both the old and new
results in the log would be probably quite confusing.
Change-Id: Ibb391f2ba2ea86d73c23365d46cc66ed8a2158d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the new configure system doesn't use this type of caching. also, it's
invoked via qt_parts.prf, which actually has the same call.
Change-Id: Ifa1e810e24330b59a1eb9f883eb0500642a212f3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
use precalculated path instead of incorrectly assembling it from
scratch. it accidentally worked when the features happened to be in the
right order, as the iteration variable 'feature' from the calling
function was inherited. however, if the feature was accessed via
dependency resolution, things blew up.
amends 90eee08b3e, which presumably came to be this way due to a missing
adjustment to a refactoring.
Change-Id: I78b0acc0682cfc27a458df014ce14262a65c6241
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The plugin depends on AssetLibrary.framework, which is only
available for iOS.
Change-Id: I798c87b57881210ced8e4a7399c1e45d130ee357
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This was added in 28f5d79316 in
conjunction with CONFIG+=single_arch, but CONFIG+=single_arch on its
own is enough to properly disable unwanted architectures for configure
tests in simulator+device builds now that exclusive simulator and device
builds have been removed for all relevant configurations. This change
therefore fixes the -sdk iphonesimulator build for the upcoming merge
from 5.8.
Change-Id: I57fa2c4f0782a84755a39c6edfce2dcfec554c40
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
users may want to use pkg-config regardless of whether qt itself was
built with it. that's particularly relevant when using binary packages
on macos while trying to use 3rd party dependencies from homebrew.
Task-number: QTBUG-36256
Change-Id: I15e6d0bf5cdaff4274e2d7c07917e97f29157a5c
Reviewed-by: Massimo Callegari <massimocallegari@yahoo.it>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Scan lex and yacc sources for dependencies as if they were C source code,
which is close enough to reality.
This will unfortunately result in the generated source files depending on
the generated headers, while it should have been the object files created
from these sources which have that dependency. But qmake cannot do better,
and this is good enough.
Task-number: QTBUG-56507
Change-Id: Ic3e1941bf2e2820bfddf99deba854e1e82f83669
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The "use" option was so far only available for tests, to define that
the test requires usage of a certain library. Extend this to libraries,
so they can also define that running the test for the library requires
usage of another lib.
Change-Id: I2749c21e27c08ad6e12040590317c06c97f493db
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
These CONFIG entries are also needed during configure, and preemptively
fixes build errors uncovered by an upcoming forward merge, due to code
restructuring.
Change-Id: I39ae5e0f24bbd43dd3c04225d42cce4edd199094
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is needed in order to be able to specify a custom location of
the ANGLE libs, and enables us to perform a LoadLibrary of ANGLE libs
by just having the absolute path to QtANGLE.dll as the argument to
LoadLibrary().
Previously, we had two ANGLE libraries: libEGL and libGLESv2. libEGL hard
linked against libGLESv2. If we wanted to load libEGL from a custom
location, we couldn't load libEGL by calling LoadLibrary with the absolute
path to libEGL, because libEGL had problems finding libGLESv2. One
solution to that could have been to call SetDllDirectory() with the path
to the ANGLE libs before calling LoadLibrary("libEGL.dll"). Since the DLL
directory would point to both ANGLE libs, this would ensure that the libGLESv2
was also found. Unfortunately, this approach is not thread safe
(SetDllDirectory will affect all subsequent LoadLibrary(Ex) from the same
process). Therefore, we chose to merge the two libraries into one to
circumvent the whole problem.
At the same time, this patch also enables loading of two different ANGLE
libraries into the same process at once without renaming them: This was
not possible before because libEGL hard linked to libGLESv2.dll. When
libGLESv2.dll was already loaded, the second instance of libEGL would
simply link against the already loaded version of libGLESv2.dll.
This behavior is documented in the LoadLibraryEx documentation on MSDN:
"If the string specifies a module name without a path and more than one
loaded module has the same base name and extension, the function returns a
handle to the module that was loaded first."
Change-Id: Ic1d886ba802be72ddcf01235bafaedcef662762e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
... and use that variable in qt_configure.prf to find the pkg-config we
detected during qtbase configuration.
This is required for modules outside of qtbase being able to use
pkg-config to configure external libraries.
We do not use the PKG_CONFIG variable any more, as that interferes with
the $$pkgConfigExecutable() function, which some Qt modules still use.
Change-Id: I8886a266207e04301009fe8207c16b02c5455b2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the application's Info.plist contains the key
'NSPhotoLibraryUsageDescription', we know that we can safely link in
qiosnsphotolibrarysupport without violating AppStore requirements.
This is a simple feature that doesn't introduce additional qmake
API for doing app deployment with optional iOS QPA plugins.
[ChangeLog][iOS] Starting from iOS 10, Apple requires all apps
that need access to photos to have the key
'NSPhotoLibraryUsageDescription' in the Info.plist.
Therefore, to get the same support in Qt (when, e.g., using
a file dialog), the Info.plist assigned to QMAKE_INFO_PLIST
will need this key as well.
Change-Id: I7a93afe24b589cad96d5a1d9e2a155ad1671178a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
QT_FOR_PRIVATE should end up in QT_PRIVATE instead of QT after being
recorded in the private module pri. otherwise it's added to LIBS and
becomes part of the library's (and thus also the public module's) link
interface. after the fix, only the (semantically redundant) resolution
of qt module dependencies will add the private deps, and only when the
private module is explicitly requested.
Change-Id: I3378457013cad5fa611a22ccbe184e6aa675a2ef
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is a bit easier on the backwards compat code in qt creator, which
needs to merge and then de-duplicate the lists itself.
Change-Id: I79f9319c26af541f5efa85700878e7ddbd00e2b7
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
since 9ff1310af, the variable's contents are simply added to SOURCES,
and the variable is not cleared. and qmake does not de-duplicate ...
Task-number: QTBUG-53905
Change-Id: I3e551d21cbbd2d0cbfbf7aa7efaa5babac112f9d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
all users of this functionality have been removed, and not emitting the
version info saves quite some noise from the generated files.
the reason why the users have been removed is that it was unreliable in
the first place: if a dependency is found without pkg-config, no version
information would be available.
the extraction of the version via pkg-config itself is kept in place, as
configure tests could be potentially optimized by utilizing it.
this reverts much of commit 48b4e0bf6f.
Change-Id: I01917f3b2a56b747d7cc54955141d20d23d0990a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTPLUGIN.<foo> is better used with valid variable names, which is not
the case when the plugin type contains slashes (plugin subtypes) or
dashes (just so). normalize these chars to underscores.
Change-Id: Icc93d952b93fef342e2fc93f20e9c5dd010dd734
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this code is meant to strip off the file name if provided (as the
accessibility plugin in qtdeclarative does), but clearly overshot the
mark by stripping the subtypes (as needed by qtmultimedia, and soon
qtbase as well). use a stricter regexp which matches only names with an
extension, which is a Good Enough (TM) approximation.
Change-Id: I63afe9c7b1b0ebf4da530dcf558e9c84ae3c85ec
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect, it has become harder to disable the use of an sdk
altogether: putting CONFIG-=sdk into a project file or the qmake
command line has no effect now. instead, it's possible to put it into
.qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
take 2: there was nothing wrong with the original patch, but in 5.8,
CONFIG+=simulator_and_device moved from qconfig.pri to various prf files
that would do it according to the simulator_and_device configure
feature, which would be way too late for the "pulled ahead" sdk.prf
loading. as simulator_and_device is now gone entirely, it is safe to
re-apply this patch (mostly) as-is.
Task-number: QTBUG-56144
Change-Id: I6cf484982eaed8af39f7a539c60f5a087a299914
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
project files may not override QMAKE_MAC_SDK any more, which seems to be
no big loss. it is still possible to override the sdk on the configure
command line (but note that this only ever worked for the target sdk).
this simplification is preparation for subsequent changes.
Change-Id: I3201629af132fa3938b13577854f3b19857a1b5a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
so far, we have been delaying the linking, because we didn't want to
make the monolithic platformsupport module pull in spurious
dependencies. however, now that the module was split, there is no need
to play such games any more.
a nice effect of this is that the hideous qpa/*unixfontdatabase.prf
files disappear, and finally freetype_dependency.pri also becomes
trivial and is thus inlined.
Change-Id: I255376d592625542310a31222eb6ac965943df99
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
public uses of external libraries are automatically transitive now, so
we can remove some parts which were only meant to pull in transitive
dependencies manually.
this is particularly good for includes() of parts of QtPlatformSupport,
which actually redundantly pulled in the library's sources.
this required making the freetype and fontconfig dependencies public,
which is ok, as in the end, they are used only by platform plugins, so
there is no point in making them private, as plugins are not linked
against anyway (except statically, but there public vs. private doesn't
apply anyway).
Change-Id: Ia2a32f50dc0f8472285675a0903e6ecd142a03b2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
when a module makes an external dependency part of its api, the users of
that module need to know the include paths (and possibly defines) of
that dependency, and also need to link to it explicitly if they want to
access symbols from it directly.
this patch implements this via the usual qt module pri mechanism.
limitation: the external library definitions are in the private pris,
so technically a public module is not allowed to make its external
dependencies public. we don't have (and don't anticipate) such a case.
Change-Id: I2dbbdcfcfc1b200acae151a969976cd668e24f89
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
for that, qt_help_lib.prf gains the ability to write "external module
pri" files that contain suitable information for QMAKE_USE.
these files have a bunch of limitations:
- they are not installed, because a) they are not relocatable and b) the
helper libs' headers are not installed, either
- it won't work with qmake -r, which is ok, as qt5 does not build with
qmake -r anyway
- deps are not transitive, neither at build nor at use time
the freetype, harfbuzz-ng, pcre, and png helper libs have been adjusted
accordingly, and their uses replaced with QMAKE_USE instances. this also
allowed inlining the now trivial {harfbuzz,pcrc,png}_dependency.pri
files. freetype_dependency.pri remains due to its funkiness.
Change-Id: I16890eecb122e34ec49f3d3e68380d1ea71a198a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
use fontconfig feature directly instead.
easier to understand data flow, and less noisy compiler command lines.
Change-Id: If80af4b08933049d553df685b41422d15e1e4f5c
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the order of the arguments passed to addExclusiveBuilds() determines the
name of the CONFIG flag which actually enables the mode. that is
historically fixed to iphonesimulator_and_iphoneos and we cannot just
change the order.
to get around this, add a new "overload" of the function which allows
specifying the flag independently from the order of the builds, and make
use of it in ios' resolve_config.prf.
amends d2b4a789c.
Change-Id: Ia3fabea0c0c30beae680b57e75bdcdf35ef6503d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
with the new configure system, all modules which have a configure.json
also produce a private config header. the forwarding module pri needs to
reflect that.
Change-Id: If79e10a2643d55ad9aa9815f20297d36d9b9feec
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
it makes no sense to version them, as they contain only #defines anyway.
it also removes the need to special-case their location in shadow builds
with pre-synced headers, which we actually failed to do anyway.
Task-number: QTBUG-56286
Change-Id: I4ea717f7be56494cfea0572389bea173d7470b6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
You can place the export macros in the namespace declarations on ELF
systems and that will apply to all declarations inside that scope. If a
namespace is exported like that, then we should mark it for versioning
too.
Note that the exporting doesn't happen for declarations in other scopes
of the same namespace, even though the findclasslist.pl script will mark
everything in that namespace. This should not be a problem.
Task-number: QTBUG-55897
Change-Id: I371f5b01e24a4d56b304fffd147274778b980ad2
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add conf files for -device qmake switch. It consists of two common
pre/post includes for FreeBSD-base device. "freebsd-generic-clang"
-device option for generic cross-compilation target, with bsdfb as
default platform and freebsd-rasp-pi-clang option for Raspberry Pi
(up to version 2) with OpenGL ES2 (eglfs) support
Change-Id: I45d91c0512f60f2be438ce46e0485844c341188a
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
the field was "over-expanded", which led to always querying the
non-existing source with an empty name. this broke the handcrafted
openssl library export which uses the feature.
amends c0cc50520.
Task-number: QTBUG-55530
Change-Id: Id019fcb3e7adcecaf47d7a65820179da1617c0f7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This scheme is needed to define Bluetooth (LE) capabilities on Windows
Phone 8.1. Setting these capabilities is a bit more involved than what
we currently support from qmake (see
https://msdn.microsoft.com/library/windows/apps/dn263090.aspx) but this
way we at least prepare the template for these steps.
On Windows 10 the bluetooth capabilities are set automatically similar
to the way it happens for other modules.
Change-Id: Ib3aa88802c3b421c9c3d02ec4db647cde2191f16
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Previously, manifest files always got processed to perform, e.g., variable
expansion.
This change introduces the 'verbatim' flag for WINRT_MANIFEST.CONFIG to
disable those steps and perform a simple copy of the source manifest.
Task-number: QTBUG-43468
Change-Id: Ie7d4d27376efb3bcf5bc38163496f0a1f1319742
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Split them and add -I flags to INCLUDEPATH and -D flags to
DEFINES. Anything else gets reported as a problem and dropped.
This has the benefit that qmake will automatically use -isystem for
those paths if they lie in a system directory. As a consequence of that,
we won't get any warnings in headers located there. There are multiple
cases of glib, gtk, etc. headers producing warnings (such as enums
ending in comma). This does not fix warnings produced by use of macros
declared in system headers, though...
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I4b844cb518dbae5ea499811221f9015af985110a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead of forcing a static build, configure now respects the
-shared flag and defaults to that.
[ChangeLog][Important Behavior Changes] Qt for iOS now respects the
-shared configure flag, and now defaults to this configuration as with
all other platforms.
Task-number: QTBUG-42937
Change-Id: I9e7b2de8f7f8ba031c2610ff5ac0858e357424bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is now centralized in configure.pri except where it explicitly
needs to be overridden.
Change-Id: If829d6b5eecf9a5fc403d0a0600d12c9e5781525
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
convert the ugly config.tests/[...]/freetype.pri file into a custom
callback in configure.pri, and reinstate pkg-config use for freetype.
subsequently, use QMAKE_USE for the actual library references.
this fixes in particular cross-builds, as the new configure was not
passing the necessary information to the test any more, so the old .pri
file misbehaved.
Task-number: QTBUG-54911
Change-Id: I5fc9c254334a2675f7db4d54df4c77637e8e2487
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
it's now possible to declare references which don't cause linking (or
cause only linking).
make use of this in the xcb-static library.
Change-Id: Ic429e0a1200b3a333738ea8d8e576ff64b6cac21
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes it possible for features added via CONFIG to use QMAKE_USE*,
as default_post.prf is processed before all features in CONFIG.
Change-Id: Id0812a0fb1aa5e658548bd2bc6003234085545e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The "args" variable would contain the original -spec XXX flags in
addition to the -spec macx-xcode passed in the system command invocation
below. The last use of -spec takes effect, so this code was entirely
ineffective. Consequently, uikit/default_post.prf in the nested qmake
call thought it's still the top-level call and thus added xcodebuild
again, which caused an infinite recursion.
Change-Id: Ie98d8a7f3c1cd875f4a4146af9a66a66b48cc6cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this is, in fact, not the same as --proxies=system, and the old
configure handles this by putting special cases before the catch-all
patterns. we achieve this by trying the verbatim names (of all options,
which is admittedly a tad inefficient) before applying the -qt/-system
transformation.
Change-Id: Ic85a9d76d6e8ca95b2e1b5566f047f4b7ac38b98
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- generic --* options are defined to be booleans, without the
possibility of having an additional parameter
- -qt and -system options don't exist in the --* form
- --foo=bar options exist only in the --* form
Task-number: QTBUG-55610
Change-Id: Ib0480ac6f479df48045c9de8e854a525862ee363
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
every repo's .qmake.conf is expected to do it already.
Change-Id: I87ed75d80493d8f1c4548c5b9dadfdaf07b86d7e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a relic from the early times of the modularization.
Change-Id: I9ca46fa6457bf9ca207b6be1f0637f0349569ddf
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The order in which exclusive builds are added affects the order of
values in SUBTARGETS. xcodebuild.mk parses the value of SUBTARGETS in
the Makefile and selects the first entry, which would always be
release-iphonesimulator regardless of the build type. This obviously
caused -sdk iphoneos builds to fail.
This patch switches the order of in which exclusive builds are added so
that the entries which are not present in a particular build type are
always added last.
Change-Id: I306d6f7430c1dff3d741a8c5182b7af81d000e7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
26d44fce3d added support for passing the
configure options to qmake following a "--" argument. This interacted
badly with xcodebuild.prf as the "args" variable would contain the
standard qmake arguments AND the extra arguments following "--"... which
were placed prior to -spec macx-xcode and the path of the .pro file,
causing them to be ignored and thus qmake to print its usage when
attempting to generate Xcode projects for Qt apps on UIKit platforms.
Amends 6a9f38a11d, which fixed the same
issue inside qmake itself.
Change-Id: I3056bd811c2ce958952fec8e05ddef7a063c0646
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There's no reason for this to be separated, regardless of the
support status of i386 macOS builds. Additional architectures may
appear in the future (and currently there's actually 3 - i386,
x86_64, and x86_64h for Haswell CPUs). So this feature could be
used to get combined generic x86_64 and Haswell builds. Some
system libraries appear to have an x86_64h slice in Sierra.
[ChangeLog][Build System] Support for universal binaries on macOS
has been re-introduced.
Change-Id: I1c89904addf024431fdb3ad03ea8ab85da7240ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA.
This is mostly for our own internal use. No documentation is provided.
Variables introduced:
- QMAKE_ASSET_CATALOGS
- QMAKE_ASSET_CATALOGS_APP_ICON
- QMAKE_ASSET_CATALOGS_BUILD_PATH
- QMAKE_ASSET_CATALOGS_INSTALL_PATH
Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes build dirs consistent with install dirs, which fixes
launching tests, examples, and build tools in some configs.
unfortunately, this makes prefix builds slower and their build dirs
bigger due to the DLLDESTDIR implementation being stupid (QTBUG-11435),
but i'm not inclined to fix that now. it isn't actually worse than for
non-prefix builds, so whatever.
Task-number: QTBUG-54438
Change-Id: Idbd034620e95cb23f7699d243678c4e9fa6353ac
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
32-bit Qt for macOS is now deprecated.
Change-Id: Idda4f4b3d48c58afae3932e7802bcf82cc75d3aa
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This makes use of the new -quiet option in xcodebuild 8 to reduce the
noisiness of output when make is invokved in silent mode.
Change-Id: I3730dddcc1d9dae329b5ff254448533cdd573a30
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
This macro expands into a static_assert and can be used to
trigger a compile error if a certain feature is not available
when trying to compile some code.
This is especially useful to protect against accidental inclusion
of headers that implement functionality related to a feature.
Change-Id: I456c55b989ce5f35f3af0e13c1886a85c23dfe29
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect of this is that project files may not override
QMAKE_MAC_SDK any more, which seems to be no big loss. it is still
possible to override the sdk on the configure command line (but note
that this only ever worked for the target sdk).
it has also become harder to disable the use of an sdk altogether:
putting CONFIG-=sdk into a project file or the qmake command line has no
effect now. instead, it's possible to put it into .qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
Change-Id: I149e0540c00745fe8119fffd146283bb214f22ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
"description" suggests something slightly longer.
this may seem like a gratuitous change, but the upcoming replacement of
the old feature system clarifies makes it seem much less so.
Change-Id: Ibe702e01cb146b59127bf1f990b4acaef1c61d55
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Ignore everything that after the initial period separated numbers.
Change-Id: I376b154ff0ab6e3877223ec1383ed4708ecd2164
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For platforms which require packaging the testdata into the application
resources, the BLACKLIST file needs to be added. Otherwise it will not
be found during runtime.
Change-Id: I2d5c3b3040b3b268bc73254459b8b902b7fae4e2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This reduces unnecessary OS conditions in qmake since these platforms
are mutually exclusive, and also opens up their potential for use on
future devices (like carOS(?), which is device idiom '5').
This is also more similar to what Xcode does, as the
TARGETED_DEVICE_FAMILY variable is not platform specific.
Change-Id: I29d209cd8e0779f492bda829008264773e13c75c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reduces unnecessary OS conditions in qmake since these platforms
are mutually exclusive, and also opens up their potential for use on
macOS to transparently support multi-arch builds like UIKit platforms.
This is also more similar to what Xcode does, as the DEPLOYMENT_TARGET
variables are platform specific, while the ARCHS variable is not.
DEPLOYMENT_TARGET has a use case for being OS specific in qmake (host
tools vs targets), while ARCHS does not.
Change-Id: Icee838a39e84259c2089faff08cc11d5f849758d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch moves towards a more sensible layout for UIKit platforms,
where both the device and simulator architectures for binaries are
combined into a single Mach-O file instead of separating out the
simulator architecutures into separate _simulator.a files.
This approach is both more common in the iOS ecosystem at large and
significantly simplifies the implementation details for Qt, especially
with the upcoming support for shared libraries on UIKit platforms.
This patch takes advantage of the -Xarch compiler option to pass the
appropriate -isysroot, -syslibroot, and -m*-version-min compiler and
linker flags to the clang frontend, operating in exactly the same way
as a normal multi-arch build for device or simulator did previously.
Exclusive builds are still enabled for the xcodebuild wrapper Makefile,
which builds all four configurations of a UIKit Xcode project as before,
as expected.
A particularly advantageous benefit of this change is that it flows very
well with existing Xcode workflows, namely that:
- Slicing out unused architectures is handled completely automatically
for static builds, as an executable linking to a library with more
architectures than it itself is linked as, the unused architectures
will be ignored silently, resulting in the same behavior for users
(and the App Store won't let you submit Intel architectures either).
- Removing architectures from a fat binary using lipo does NOT
invalidate the code signature of that file or its container if it is a
bundle. This allows shared library and framework builds of Qt to work
mostly automatically as well, since an Xcode shell script build phase
can remove unused architectures from the embedded frameworks when that
is implemented, and if Qt ever starts signing its SDK releases, it
won't interfere with that either (though binaries are just resigned).
Change-Id: I6c3578c78f75845a2fcc85f3a5b728ec997dbe90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is done because a followup patch will cause simulator_and_device builds
to no longer use exclusive builds and so this feature could not work,
but it is not strictly necessary anyways because users do not need to be
able to do this.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: If869fbfea776751553c352c2d652edf745a3638d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The actual blocker for precompiled headers is not the iOS/tvOS/watchOS
platforms, but the way qmake handled multiple-architecture builds on
Apple platforms.
This patch allows multi-arch builds to be performed while using
precompiled headers.
Since df91ef3d6c55692a0236f67b6c6b134a3bf84098 (April 2009), Clang has
had support for PCH files in the driver, which allows to use the
-include flag to automatically translate to -include-pch. We can then
take advantage of the fact that the -include option is allowed to not
be separate from its argument, which lets us take advantage of -Xarch to
specify a per-architecture precompiled header file.
This is done through some magic in the qmake Makefile generator which
"multiplexes" the PCH creation rule across multiple architectures and
replaces a series of tokens with the proper precompiled header paths
and architecture flags at usage point.
Change-Id: I76c8dc9cda7e218869c2919f023d9b04f311c6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Actually enables headerpad_max_install_names in the darwin-g++ mkspec
as previously it was (presumably accidentally) cleared.
Change-Id: I4b2e5a0dcf38658cfe35bc0e5f24769c80f4d877
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Now QMAKE_RPATHDIR also includes @executable_path and @loader_path
on Apple platforms, and omits any others on iOS, tvOS, and watchOS
since they can't use paths outside the application bundle.
Change-Id: Ia8f76ebcddd51f44eca482a51ce1710369c8df10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
iOS was excluded in 09aeda21b9, probably
unnecessarily. The build has been found to be warning-free.
Change-Id: I81de2fff40938b6ab9f7a6a5b9f08f8a8baadb16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
No need to get libs flags other than -L and -l, since we're adding
everything to the LIBS variable in qmake anyway. We wouldn't want rpath
or other linker flags to leak through.
Change-Id: I7d42fe4b581e49df891cfffd146fab61fecbc5c9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
that variable is not modified in this scope, so there is no point in
exporting it here. it was probably a leftover from an earlier version.
amends c0cc50520.
Change-Id: Ic6f93d8c38d547308aa88ef337fe49bda004b337
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are build-time generated, so they must go to the build dir
irrespective of whether we're using pre-synced headers.
Task-number: QTBUG-55585
Change-Id: I5f10b35c40b0ae2ddc5568d70e254b787ac3f914
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we need to suppress another qtConfig(simulator_and_device) check during
the configuration phase.
amends 60985aa4.
Change-Id: Iae279d282d47b4c254b7a6f9f33315abe126eff0
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
All of these flags were blindly copied from Xcode and all of them are
not needed because they are unnecessary or at the very least are for no
reason specific to iOS/tvOS/watchOS.
* -fvisibility=hidden,
-fvisibility-inlines-hidden - handled in common/gcc-base.conf
* -fpascal-strings - a Mac OS Classic legacy, no one uses these
* -fmessage-length=0 - formatting option, not needed
* -fexceptions, -fasm-blocks - these are on by default and not needed
All explicitly enabled warnings are enabled by -Wall, which is handled
in common/gcc-base.conf. All explicitly disabled warnings should not be
disabled because we simply do not do this anywhere else in qmake.
Change-Id: Ifb9b2ff100837c7cf5888493a6413c972609598d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Previously we hardcoded the minimum windows version to the initial
Windows 10 release. However features have been added which require a
higher SDK version (eg drag and drop). Deploying such a package might
fail during distribution to consumer devices.
Hence introduce WINRT_MANIFEST.minVersion and
WINRT_MANIFEST.maxVersionTested as variables for the manifest file. If
nothing is specified, both values will be set to the UCRTVersion
environment variable, implying the development setup from which qmake
has been invoked.
Change-Id: I1dcf1e75c67c4ab2fd5a3fdcc32c8783a336e6ff
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
there is no point in doing that, as we don't load it in that case
anyway. in fact, it would lead to caching a new result in every run.
Change-Id: Ia5cb27fa8a5d705d7f32a785b1e3b944f92d8929
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
as these tests do nothing but validating the command line, caching the
result is more confusing than anything else.
also make the tests silent, so they don't clutter an otherwise fully
cached configure run.
Change-Id: Ifc3d65278769b36a056650f077fd6274a7e192e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
when it comes to compiler flags (be it warnings or include paths), it
doesn't matter whether we building/using bootstrap libraries, but
whether we are actually cross-building.
amends c55bdc271f and d8be8110a.
Change-Id: Idf988107e9cccc486672c0ee70dc9bdf8eab9d8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
"simctl list devices" has changed output format in
Xcode 8 beta to include additional information placed
inside parentheses for each device. And this confuses the
scripts we use to parse and find UUIDs.
Instead of making the inline scripts even longer and more
complex, this patch will factor most of it out to a separate
perl script that reads out device information on json format
and parses the UUID.
Change-Id: I3cd4dc276ecda030fda1932073c8bf1e0bc85deb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
It results in passing an option on the command line that e.g. the
QCommandLineParser doesn't understand.
Change-Id: Ied08c930fab479b6432f025dfe861bdf22c513e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
macx-g++40 and macx-g++42 refer to very old versions of GCC that
virtually no one should be using, and macx-llvm refers to the
transitionary LLVM-GCC toolchain that is long gone from Xcode.
Change-Id: Id22ea417515b257babc5ad2a60c8f1fb6d6d1956
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This was probably a leftover that slipped past review for tvOS, and then
got accidentally carried over to watchOS. They serve no purpose as
there are no such named directories, nor does iOS have anything similar.
Change-Id: If2a0f592e83e07db1f3aace320e73046e824994b
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
These actually affect all UIKit platforms (tvOS, watchOS), not just iOS.
Change-Id: I2b45ebecb10d11e33d301071093b5342ce101816
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This fixes errors linking against Qt when built as shared libraries and
with bitcode enabled (default on tvOS and watchOS).
Change-Id: I3eb3bb0b9615e0bc41e43ffae8645248dbf803c6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
It's optional but default in Xcode, and will probably become required
Change-Id: I6917a9cf15b48dbaee57f1a92ea47d68fb3c253a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
- remove the unconditional CONFIG+=c++11 from default_pre.prf, so the
change actually has any effect
- fix up the description fields somewhat
this amends 091df96fb8, which was rushed in without maintainer review.
Change-Id: I88b859d6e2f0fe3d6a4771afe464a7c445e7b47b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These are not meant to be overwritten by command line defines
anyway. Bad things could happen if they are not in sync with
the values in the pro files.
If you want to change them, reconfigure Qt.
Change-Id: Ic456e54b97e6909f01a4f4be33e3d7e2b2571e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Defining QT_OPENGL_ES_2 would only lead to conflicts with defines from
qconfig.h.
QT_OPENGL_ES_2_ANGLE also moves to the .pri.
QT_OPENGL_ES_2_ANGLE_STATIC is not used and is removed altogether.
Change-Id: I614fb00525ac696e066ac8328bb9bf61fca08a01
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
privateFeature would add QT_NO_FEATURE to the DEFINES in the private
.pri file, which was somewhat inelegant.
Additionally, it would add the feature to the _public_ QT_CONFIG
variable, which was plain wrong.
Replace the implementation with the one just introduced for
publicFeature, with the difference that the features are written to the
private files instead.
As this entirely disposes of the old system, all usages in the project
files need to be replaced atomically as well.
Change-Id: I506b5d41054410659ea503bc6901736cd5edec6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Added a qtConfig(feature) function to qmake, and a QT_CONFIG(feature)
macro. These can safely check whether a certain compile time feature of
Qt is enabled or not.
For this to work the feature has to have a publicFeature or
privateFeature output in the configure.json file.
In pro files, please use the qtConfig(feature) test function
instead of checking contains(QT_CONFIG, feature), as the latter
will be unreliable with the upcoming modularization (it requires a
load(qt_module_config) before doing any such checks). Note that
feature names are now lowercase, and identical (except for hyphens
versus underscores currently) in the pro and c++ files.
This makes the logic easier to follow, as we avoid all double negations,
and most importantly, QT_CONFIG and qtConfig are implemented in a
way that you'll get a build error for a mistyped or non-existent
feature. This will also prevent accidental use of a widget feature
in gui in the future.
This gives us complete symmetry between the handling in pro and
c++ files.
Change-Id: I60404f97953724e639ffb6386cce2e8b1e4b735a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Output the version as a define into the private config header as
a define using a hex number. Like that we can easily do version checks
on libraries using the QT_LIBRARY_VERSION(lib) and QT_VERSION_CHECK()
macros.
Change-Id: I6dc4ac6550886ca95c5542b6e75cd933ed079d76
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this wasn't possible when these headers were still generated by syncqt,
as the targets may have been still missing at that time. however, as we
do that now with qmake, forwarding the timestamps is perfectly possible,
and is consistent with what syncqt itself does for "regular" headers.
the immediate problem this solves: when the early creation of the
forwarding headers in qtbase.pro is removed, they get created only when
corelib.pro is processed. their timestamps would be after the timestamps
of the already built bootstrapped libraries. if now the project files of
these libs get re-created, qmake's not conditional-aware dependency scan
would add these headers to the libs' deps, thus causing them to be
re-built. the re-built tools would in turn cause all mocs and thus all
libraries to be re-built. this would be particularly problematic if it
happened between 'make' and 'make install' due to another bug ...
Change-Id: I8d597f1f925369d93aaf3cc6c02e954eeae003a4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this switches all instances of LIBS[_PRIVATE] += -lfoo where a config
tests exists for foo.
this removes some code duplication between tests and project files (in
case of conditionals), and ensures that the projects always actually use
the libraries configure has found.
Change-Id: Ia7e80c8db5f329290c7f1a4e03a8bf78882a687e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Adding an entry that represents an external library to the
QT_USE[_PRIVATE] variable will cause qmake to lookup the
required compiler/linker flags from the configuration system,
and add them to the module that is being compiled.
Change-Id: I309aa2749ddf4fab13ab8fdd26e8ab2123719ea8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cleaner, and covers windows as well.
Change-Id: I0e884909a3f49610fab750ba1ef6112f43e5d5d1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add the command line options supported by the windows version of
configure and respect them when running our configure tests.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I1206d60a177e251540d34d232c73c930847564b3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So far we only had support for locating executables. Also
support locating header files and libraries.
Change-Id: Ib2a83e8338d2da975204089d84c608061a081f29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some test types (like the compile tests) require that other
features have been checked before, so that the compile test
sets up the right environment. Implement this through a
'testTypeDependencies' section in the json file that explicitly
encodes those dependencies for certain test types.
This replaces the 'priority' field in the feature list.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I70e7c67a4f2c971149bcac090cecbbe9cfff3f57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each library was distributed over a test and (optionally) a
'library' output of a feature. this was conceptually messy and limiting.
so instead, turn libraries into a category of their own.
libraries now support multiple properly separated sources, which makes
overriding them a lot saner. sources can be conditional to accommodate
platform differences.
as an immediate consequence, move (almost) all library references from
the config test projects to the json file.
a few tests were excluded, because they are doing somewhat magic things
that should not be handled in this bulk change:
- freetype: .pri file shared with actual source code
- clock-gettime: -lrt is conditional, and there is a .pri file which is
shared with actual source code
- ipc_posix: -lrt & -lpthread conditional
- iconv: -liconv conditional
the multi-source mechanism is used to make a variety of tests work on
windows, where the library name differs from unix (and sometimes between
build configurations). some tests still needed minor adjustments to
actually work.
on the way, fix up disagreements between manually specified libraries
and pkg-config lines (affecting several xcb-related tests).
Change-Id: Ic8c58556fa0cf8f981d386b13ea34b4431b127c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
never use $$system() directly, but instead use qtRunLoggedCommand() with
a newly introduced out parameter. that way we can print the command's
raw output, which should help debugging configure problems.
additionally, we now consistently check the exit code of all executed
commands, which should avoid confusing followup errors.
note that as a side effect some calls now use $$system()'s 'lines' mode
instead of the bizarre default splitting mode. this has no impact on any
of the cases, which is why it is basically a negligible style change at
this point.
however, qtLog() gained support for arguments with more than one element
to accommodate this.
Change-Id: I40d907e27de32dfec8d6086ce7d93fc4be18241f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it's not quite clear what the purpose of this is supposed to be,
especially given that the prf is loaded way after anyone would have
examined QT_CONFIG.
Change-Id: Ia49377c952902fed4084178c7f857e1acd11ad03
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
llvm-ar is not shipped as part of Xcode. Use libtool instead, just like
Xcode does.
Change-Id: Ic9c5e16c826c0d42979556f78d2cf6415542ef93
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
plugins.qmltypes should never be built into resources, but always
deployed on the file system so Qt Creator can read it.
Task-number: QTBUG-52297
Task-number: QTBUG-52299
Task-number: QTBUG-52940
Change-Id: Ieadb82bcb71dd4fb769fa0b7d15ec74e12ce7b42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This allows overriding the INSTALL_ROOT with the Xcode generator.
Change-Id: Ifb894bdbf9764918f76428fb32d9af68914853f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This fixes the examples build on UIKit platforms in
examples/dbus/pingpong where there are two Xcode projects and the build
therefore cannot disambiguate between the two.
Change-Id: Ic8b808c1ddf3565bb9861a487eab6854ec177184
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
qtPrepareTool() must be called outside a build pass, as it protects
against concurrent wrapper creation by omitting it during build passes.
Change-Id: I7cf080cf78d1099e4893a204ea40d8c6bc63af58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It seems there is a configure test which should enable it.
This reverts commit 7e4f0ad961.
Change-Id: I39c594e5e779732d2f5954b42e266a1eaa1be3f0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In a parallel build we may end up copying the qmldir file at the same
time, which doesn't work on Windows due to file locking. Apply the same
guard for the copying condition as in commit
770a0c91f3.
Change-Id: Ia34395e8654acf192b94e7ea6d0137730e4ea027
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The qmldir file is needed in the build dir for non-installed
static builds, so that qmlimportscanner can work.
Change-Id: I9028db6d1e36da5a2be9b0c1ba4c9d475edd5cb5
Task-number: QTBUG-53926
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's bound to the bourne shell, which is not readily available on
windows hosts.
on the way, the pch, fvisibility, and bsymbolic_functions tests were
rewritten as regular compile tests. they now just verify that qmake's
built-in support for the tested features actually works.
Change-Id: Ibac246f21b5ececa40da3f576dc789982eaf9fdf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We set CONFIG+=largefile directly from configure, and there is never
a largefile feature in QT_CONFIG.
Change-Id: I3518c749d674529b272685b6ed6c738e48ee5cd7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We used to check if the SDK used by a project is less than 8.0 and error
out if so. The intention of the test was to avoid a situation where a
project is built with an SDK that is older than the one used to build Qt,
but this was obviously bogus, as Qt could have been built with a newer SDK
than the oldest supported one. Also, 8.0 has been outdated for quite a
while.
On top of that, the check failed now that the major iOS version has two
digits.
So let's remove the check for now, until we can handle this in a better
way.
See QTBUG-37592.
Change-Id: I6106b9521b5d47d9906d4db30c2ffa21794bc307
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When xcodebuild in Xcode 8 beta dumps out the available
destinations, it prints an extra section called 'Ineligible
destinations for the "tst_someTest" scheme'.
Those destinations doesn't contain valid ID-s for the script to
use, which will result in "make check" failing.
This patch will filter out devices that are marked as placeholders.
Change-Id: I88a25b7307e21b76c6f7764a82f67627aae8f02f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... and refactor it to make it less scary.
note that "qmake_args" now basically means "qmake + args".
Change-Id: Ifa5b756642de95e2aadf01606d936ea1d7a18210
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
its actual function was qtLogCommand(), but all callers outside
configure_base.prf apparently didn't know that. adjust implementation.
Change-Id: I910d4ba33c6f31debc81c37e3bfff1a288190355
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the command can be a compound statement (usually 'foo && bar' style),
so enclose it in parens before redirecting stderr.
Change-Id: Ib72a2c8ddfd17bf9457e9cfe2652121258ce9a64
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
overriding an output's 'feature' field would just lead to confusing
error messages. the right way is setting the 'name' field.
adjust the 'dbus' library output to this policy.
Change-Id: I912133f3a0a50fc55f2e16a1ed6bfa464aae8d88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we pass the pre-quoted value directly to the output function, which
adds another layer of quoting. to avoid over-quoting, introduce the
'eval' attribute which sends the value through eval() first, thus
removing the extra quoting.
Change-Id: Ic63a50cb7eccc61b0f730476e124339aeb95586c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
while the previous code actually worked, it's probably more or less
coincidence that running "false" produces the correct result.
Change-Id: Ib332bd6789ac7188570ba1af4676494b4e2c9d8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
due to gmake's Makefile auto-rebuild feature, the distclean would
typically invoke qmake. overall, the step would almost double the run
time of each compile test.
instead, just clean between the regular qmake and make steps. this
deletes the object file the test executable depends on, so this is
sufficient to trigger a full rebuild.
Change-Id: If8e254e172dd169e31fd606d9ef31d9a14f670d8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
standardize on the fields in the json structure being single strings in
which separate elements are quoted and space-joined (because quoting
is unlikely to be necessary in the json file itself, and this format
avoids the visual noise of array handling).
the quoting itself is expected to be qmake-compatible, which is assumed
to be the case for the output of pkg-config (it's actually shell-quoted,
but that's the same except in some not-so-relevant corner cases).
Change-Id: Icc1d7abc02c449fa759d9714bc5e56e2b8809585
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The spec, added in 5.7.0, simply defined WIN_INTERFACE_CUSTOM, leading
to the generic, non-X11 typedefs for the EGL native types. This is
fine for the typical embedded use, but is not what is wanted when
targeting xcb, and leads to disabling EGL-on-X support.
Therefore, move the define into a comon header and let the individual
libs decide by defining or not defining QT_EGL_NO_X11. This sets both
MESA_EGL_NO_X11_HEADERS and WIN_INTERFACE_CUSTOM in qt_egl_p.h.
This way Qt builds supporting all three of eglfs (DRM+EGLDevice),
wayland, and xcb (EGL) can be generated out of the box.
[ChangeLog][Platform Specific Changes][Linux] xcb with EGL and OpenGL
ES, as well as eglfs with the eglfs_x11 backend, are now supported on
DRIVE CX boards when using the linux-drive-cx-g++ device spec.
Done-with: Louai Al-Khanji <louai.al-khanji@qt.io>
Task-number: QTBUG-55140
Change-Id: I6f186d16612e170995e3bca1214bcabad59af08e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Let the qtattributionsscanner tool generate a .qdoc file in
the build directory that contains code attributions for
this qdoc module.
Task-number: QTBUG-55139
Change-Id: Ic7532c9a7c092f552c36e21ee6cbebdd0107689b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
To make sure it does not end up picking the desktop OpenGL implementation
from Mesa that may be present in the sysroot.
Change-Id: I815eb7d2664f9e62d620acf8260cae40f83dfaf8
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
get rid of the entirely superfluous stock "Aborting." messages -
the event triggering the exit has already reported the problem.
Change-Id: Ib9dfb9e4212f60eceb2ea432cdf56c5a8afe9d65
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is required for projects compiled with CONFIG-=qt, which is not
supported so far, but is required for the new configure system.
Change-Id: I85d7de9105ff68c73e8a433a3c757864a619cce8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
The config test for eglfs-brcm would fail otherwise on modern Yocto-based
sysroots, as these have no /opt/vc, but have a proper egl.pc that has the
include path and libs.
Task-number: QTBUG-50838
Change-Id: Ibe8dcfbfe9aabe00fd8c040e6e41a4479ccb39bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
otherwise we get an unintelligible mess if multiple messages are emitted
in the same category. also, there were already empty lines between
categories, so it was also inconsistent.
Change-Id: I5e6622bc8a5d2773bbd99124cedf4e3eb73b8a60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the json parser passes line breaks verbatim, so we need to get rid of
them ourselves.
Change-Id: I3b71fe54dcaa8c3a2ff94e8ac4845f49dabe1663
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused when this type was invoked explicitly
(because of using a condition).
adjust the neon/mips_dsp/mips_dspr2 descriptions to match the context
and remove the now redundant "message" fields.
Change-Id: I08558f342a0d9189a37145085e5470f91a9d0881
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused for this type.
adjust the c++* descriptions to match the context.
Change-Id: I2a76b5651892bf9bd6fec315e446bfdb7c3aee97
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused for this type.
adjust the sse/avx/avx512 descriptions to match the context.
Change-Id: Icf514718355c6ccd608d825b70296cc0383dbfe8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
while probably not too useful, the old configure does allow explicitly
disabling verbose mode.
Change-Id: If0585443c649a67f616b3668cc90b18fecde11ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since Xcode 8 (beta 2) that tool is no longer available
through xcrun. We resort to xcodebuild instead.
Change-Id: If9d7b535c1cbac2caae0112b2003283aeff34fb9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
C preprocessors augment their standard list of include paths from the
environment: Unix preprocessors use $C_INCLUDE_PATH (for C) and
$CPLUS_INCLUDE_PATH (for C++), plus CPATH for both, whereas MSVC uses
the an environment variable simply called "INCLUDE". Handling this for
MSVC is particularly important because the VCVARSALL.BAT script sets the
necessary #include paths in the environment for important things.
Without that being parsed, moc won't find some #defines, like
WINAPI_DESKTOP_FAMILY.
[ChangeLog][moc] qmake and moc now cooperate to use the Visual Studio
environment variables (set by the VCVARSALL.BAT script) to find system
include files. A possible consequence is that moc parses application
headers slightly differently, depending on #if conditions that depended
on macros that previous versions had not seen #define'd. Implementers of
other buildsystems are advised to pass the --compiler-flavor=msvc option
to moc.
Change-Id: I7e06274214d1939b0124e5b4bf169cceaef9ca46
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In order for moc to properly parse #ifdefs and family, we've had
QMAKE_COMPILER_DEFINES as a list of pre-defined macros from the
compiler. That list is woefully incomplete.
Instead, let's simply ask the compiler for the list. With GCC and
family, we use the -dM flag while preprocessing. With ICC on Windows,
the flag gains an extra "Q" but is otherwise the same. For MSVC, it
requires using some undocumented switches and parsing environment
variables (I've tested MSVC 2012, 2013 and 2015).
The new moc option is called --include to be similar to GCC's -include
option. It does more than just parse a list of pre-defined macros and
can be used to insert any sort of code that moc needs to parse prior to
the main file.
Change-Id: I7de033f80b0e4431b7f1ffff13fca02dbb60a0a6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
Now that -l and -fw options are gone, using a combined EXTRA_LIBS
makes no sense anymore and only complicates things.
Change-Id: Ic12bf482f3bed041aff7f0891f008b1f34ae2b4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was missed in ab599a3931 when
QMAKE_STRIP was set as a side effect of adding support for separate
debug info.
Task-number: QTBUG-54212
Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
exclusive_builds_post.prf (via default_post.prf) processes
debug_and_release into BUILDS, so .prfs which can rely on being
executed later (because they are loaded via CONFIG) can rely on BUILDS
and related variables.
Change-Id: I5677079ad5145bf493af17b4b60347208572fd21
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the whole point of the check is ensuring that the message is printed
only once for each sub-project, so !build_pass alone is fully adequate.
Change-Id: Ib8f821ead6709efc9bfa935e1d05f8caba02a814
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This patch adds a warning that will be shown when link_pkgconfig is used
in a project but Qt's configuration has it disabled. This can happen
when Qt is built before pkg-config has been installed or if it's not
detected.
This will avoid user losing time trying to make pkg-config work while Qt
just ignores it.
Change-Id: Ieeff8dd6784b9430cfebef355855ec1be91bc96e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As OpenBSD ships its own X11, linker errors occur when not explicitly
adding the X11R6/lib dir to rpath dirs.
Change-Id: I75991e9d7de115d2d212a017d9c8f9aa93cecc27
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
On OpenBSD, the system compiler shipped is still gcc 4.2.1 but for proper
C++11 support in Qt, QtCreator and Qt-based projects we need to use
the compilers provided in ports/packages which have the binaries renamed
to eg++/egcc. Therefore, redefine the variables from g++-base.conf to
use the newer compilers.
Change-Id: Ic8ea1c5d2c2c0263dad5ae85c8c747bcd3985b7d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's only used in one place, where it's actually not required either.
Change-Id: I5766d2b5f0c1083bbd58a9b9fb07cc67bbd46a94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not a feature that should get propagated to other
configure runs, so simply hardcode support for it.
Change-Id: Ieb1c33243154b3583e91061d3592d7e87c36f402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The regexp were capturing too greedy:
$$replace(c, "^--?(.*)", "\\1") changes --developer-build to
-developer-build. Do not accidentally capture the second dash.
Change-Id: I19586a1678fc3bf3f450ec31f5bd7e71e9514b34
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
NetBSD is heavily dependent on using rpath, so we need to add the
lib dir QMAKE_LIBDIR and QMAKE_LIBDIR_X11 to QMAKE_RPATHDIR
explicitly to avoid linker errors. See http://www.netbsd.org/docs/elf.html
for more info.
Change-Id: I225143d5e2d9a125060b14e3a8a7953927d63b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
qmake tries to use pkg-config when the config.test contains PKG_CONFIG,
which will of course fail without the sysrooted env vars. and unlike in
the old configure, these don't become automatically available by virtue
of the script simply exporting them.
longer-term, the test programs shouldn't mention pkg-config deps
explicitly, as these are redundant with what is specified in the JSON
file. relevant changes are already pending.
Task-number: QTBUG-54403
Change-Id: Ie9d3bbb2e4febffde5fd122d7d0a8b70b8679fcc
Reviewed-by: Liang Qi <liang.qi@qt.io>
don't have extra spaces in the pkg-config calls when no environment
variables are injected.
Change-Id: Ieb14f775b2a04726e8f62114b69d9be7fa662eb0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
using the Makefile target separator to determine the host system is of
course not a terribly good idea. the correct variable to query would be
DIR_SEPARATOR, which always reflects the host. however, a direct os
query is less obscure in this case.
Task-number: QTBUG-54346
Change-Id: I6bc1372a7c9a84a241a97f9f767f046b026411c3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
while the names of the compilers are actually an undocumented internal,
we don't provide an actually working proper way to sequence extra
compiler execution with build-time generated inputs when they are
indirectly listed (as via .qrc files).
Task-number: QTBUG-54299
Change-Id: I269c26512897b72706dc8b769aa47e8157c2a5c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This follows up ab599a3931, which did not
take installation into account.
Task-number: QTBUG-54036
Change-Id: Ic1b3acb8984255dd1ca1c288b7b150814ce9e606
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... for a loooong time.
it was replaced by plugin_with_soname (which is unused so far).
Change-Id: Ifc377d155d6eac41e85f3a0914ed817d55b5648b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the tests would inherit MAKEFLAGS, with somewhat predicatble results.
Change-Id: Ia17638f6229d0ae86f5558726850040703d90044
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
libGLES2 (the only user of these libraries) is built dynamically even in
a static qt built when dynamicgl is configured. in this case the static
libraries need not be installed.
amends 2311997.
Change-Id: Ic9bc3937d6ee0d97e0ca7fc96596fa90ebfe8710
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
don't add framework directories (including the respective marker!).
this is consistent with the unix configure code.
Change-Id: I2e187057bc3fe2b35128cd5dc2af57b9f3685d83
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
iphonesimulator_and_iphoneos was renamed to simulator_and_device in 5.7.
Task-number: QTBUG-54163
Change-Id: If4a76f45450edc0f6e8fb3615355613212314300
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If macx is present, osx AND macos should be required.
Change-Id: I5cd9d41270c741dc314720a1119b163dd17fdfd7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As common bsd's are using the -ffunction-sections flags from
mkspecs/common/gcc-base.conf, also use the --gc-sections ld flags
like Linux as all are using GNU ld as their linker and all are
capable of using it. The last remaining problems with --gc-sections
removing the .name sections providing the OS tags for distinction of
the execution layer were solved with NetBSD 6.0 and OpenBSD 5.4, see
http://gnats.netbsd.org/40401 and http://www.openbsd.org/plus54.html
so this option can safely be used now to reduce the size of moc and rcc
tools.
Change-Id: I74ccd4f6bc607f6d82d32fc864875f26b26bf167
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the strip commands for installation commonly used also on BSD
systems.
Change-Id: I4113ffa559a737ef92afb7c90ab5e1bff902b1bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So that it actually compiles with gcc-linaro-arm-linux-gnueabihf-raspbian.
Remove also flags a device spec should not set (like -std and -O).
Change-Id: Ib7a3bc298e60715410d5c00fbc22199ab4711fa7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The rpi3 spec added previously is only half of the story now that we
have the option to use another GL driver.
Change-Id: I1b1edde77bcc6d2f382f1021de9c594c27c34d6f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
BSD OS mkspecs share mainly the same configurations except very few
differences. Merge into a common/bsd/bsd.conf file to be used across all BSD
OSes in their respective qmake.conf and add a qplatformdefs.h that contain
the common defines to be re-used in the BSD mkspecs.
The change includes the usage of <sys/param.h> also on NetBSD through the
common qplatformdefs.h, which is intended for using NetBSD's version defines.
Change-Id: Ibb0ac9e4c8bb5aff7d0febdcab1a4b9600a61117
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the assumption stated in b67a0836d is actually invalid - configure sets
build_all without debug_and_release there. debug_and_release does
actually imply build_all, though.
to make things less confusing, don't let configure inject
iphonesimulator_and_iphoneos into all projects, but handle it like
debug_and_release instead.
Change-Id: Ib7acdc63308a538862fc603428f81aba60bca08e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
OpenBSD made the switch from a.out to ELF with release 3.4, published
2003, see http://www.openbsd.org/34.html. In preparation to cleaning
up the mkspecs for OpenBSD, remove the a.out defines as only recent
versions of OpenBSD (5.8 onward) will be supported.
NetBSD switched from a.out to ELF file format with release 1.5, see
https://www.netbsd.org/releases/formal-1.5/NetBSD-1.5.html in the year
2000.
Remove the defines for older a.out systems now as we are at release 7.0
and only 6.0 onwards releases are currently supported anyway.
While cleaning up, remove the old comments for QT_SOCKLEN_T values of
outdated OpenBSD and NetBSD releases as well.
Change-Id: I8519eab7bcd4af19c0e9f628657878f32b2bd602
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
