Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There's no use of QRegExp here therefore remove the include
Task-number: QTBUG-72587
Change-Id: If281c34d202c9fae4e548c8293443cc0dc283de0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code for generating round line joins is optimized with a shortcut
for the inner, normally invisible joins. For certain joins of a
tightly turning bezier, this optimization would lead to visible
painting error. Fix by avoiding the optimization if the next control
point is so close as to allow such tight turns.
As a driveby, make the angle > 90 test cheaper, since absolute
precision is not required in the optimization choice.
Fixes: QTBUG-75008
Change-Id: I293e0776003310dc36fa7f43fbcd9c25f1f8fa5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Note that the test is still disabled, but this is needed in any case.
Change-Id: Ib7523ba800b94c32690c1bd09b23fc2078c71d4e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have been rather sloppy in how read-only versus editable is handled.
According to the definition, editable signifies that in principle a
widget allows the user to change its text. Read-only means that this
ability is (currently) disabled.
Task-number: QTBUG-75002
Change-Id: I5d71843abcdaac52f4a60a1abcac2604341f6c96
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The full stroker does not produce good results for aliased lines
thinner than 1 pixel. Avoid it by making sure that such thin lines
are painted by the cosmetic stroker, even when they have
non-uniform transformation.
Fixes: QTBUG-73866
Change-Id: I7b5f0fa555903246e0c3fd92cd435cc8c0b15a24
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some directories that depend on QtGui were being included without the
appropriate check for qtHaveModule(gui).
Change-Id: I7c348c74464d44cbd35a027f188f8a23bb2021d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds a test case for 199f9c5448.
Task-number: QTBUG-59310
Change-Id: Iee26f8bc21884da36471935f64524b62c3f79ff4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
The tests would rely on the window manager giving it focus a bit too much.
Change-Id: I1b28def2c95a4f0a9665a7cf6e0c14db03df98d5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
It's almost completely blacklisted anyways, and the parts that are
not are flakey.
Change-Id: I4601d751a2963c94c62ec439dd78b874034069a0
Reviewed-by: Liang Qi <liang.qi@qt.io>
These autotests are not currently working with the Ubuntu 18.04
platform being introduced to the CI.
Task-number: QTBUG-70227
Task-number: QTBUG-70226
Task-number: QTBUG-70224
Task-number: QTBUG-70223
Task-number: QTBUG-70209
Change-Id: Ibe7cafd37763d7d305d8c3d9ec17bc6339db744a
Reviewed-by: Liang Qi <liang.qi@qt.io>
This autotest fails on the Ubuntu 18.04 platform.
Task-number: QTBUG-70153
Change-Id: I2a2b0075a046664cdf5733d8629f634b4e33dc6f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
QAccessible::StaticText should be mapped to UIA_TextControlTypeId instead
of UIA_EditControlTypeId.
Task-number: QTBUG-69894
Change-Id: If2f8f55d2be492c02a3af5b1813ca12cf774a33a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Adds support for 16bit per color image formats in QImage. This makes it
possible to read and write 16bpc PNGs, and take full advantage of the
16bpc paint engine.
[ChangeLog][QtGui][QImage] QImage now supports 64bit image formats with
16 bits per color channel, compatible with 16bpc PNG or RGBA16 OpenGL
formats.
Task-number: QTBUG-45858
Change-Id: Icd28bd5868a6efcf65cb5bd56031d42941e04099
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This autotest fails on Ubuntu 18.04.
Task-number: QTBUG-69892
Change-Id: I3673d06f06fcd8db307fc53c27724b227978f20d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69648
Change-Id: I08bd892e2b6a733f3cda32091463745e8b8feed7
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69599
Change-Id: I575e6f52a539e03ab37ca62e580889854ddb9781
Reviewed-by: Simo Fält <simo.falt@qt.io>
Writing out one test result per line in the test data files is
excessive and only bloats the log, given that this algorithm
is rarely changed.
Task-number: QTQAINFRA-2037
Change-Id: Ib9e568c7ded73d45e4b64671e97d5581a74f8f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The ObjectBoundingMode coordinate mode of QGradient allows specifying
the gradient coordinates relative to the object being painted. But if
the gradient brush also has a transformation, that transformation is
applied in the logical, not object, coordinate space. That behavior is
counterintuitive. However, changing it now would break existing
code. Instead, we introduce a new coordinate mode enum with the
expected behavior, and document the old one as deprecated.
This prepares to fix the bugs below in qtsvg, by making
it possible to specify the same behavior in Qt as SVG has.
[ChangeLog][QtGui][QGradient] Add ObjectMode coordinate mode
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 18 to account for changes in the serialization of QGradient.
Task-number: QTBUG-59978
Task-number: QTBUG-67995
Change-Id: I8820a2555359812f3e1a46e37d6ac2cc29a2091d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In order to get winrt CI checked, the network tests are being skipped
for now. As soon as winrt has landed in CI, these will be fixed and
re-enabled.
Task-number: QTBUG-68297
Change-Id: I692d72f9e0c97840bd7396551b4e707eec845ebb
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68861
Change-Id: I343d8b583d105a7e1cc336e94399cde9eb261e9c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
If the fbo had samples > 0 set, it would use a temporary fbo with
a default configuration losing the HDR precision.
Change-Id: I7e9966165b3100f148c4ad24738f3ee71273f29a
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
When the application closes, we should clear the cache to not run into
memory sanitizers claiming that we leak.
Change-Id: Ibf9fcda107be6b7f3ed414d7651080aa1f61a3a5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
