Append was previously optimized for lhs being empty but it should've
also taken into account if space had been reserved.
Apply the same optimization to prepend while we're at it.
Change-Id: I5e5d33a3189b9ad88d45e858a2ac412cbc294f79
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QLocale] Deprecated several Language and Country
aliases, ready for removal in Qt 6.0, in favor of their newer names.
Task-number: QTBUG-84669
Pick-to: 5.15 5.15.2
Change-Id: Iebaa0a5a77bfa12f7014de53fab4a25b5f1cc92c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These are languages for which CLDR does not even recognize the claimed
language code (three-letter codes except for bh = Bihari, which might
be an old name for bho = Bhojpuri, which CLDR does give, but provides
no locale data using it).
[ChangeLog][QtCore][QLocale::Language] Many obsolete language names
are now deprecated in preparation for removal at Qt 6.0. No data has
been available for any locale using these languages since CLDR v29 (at
least; Qt now uses v37).
Task-number: QTBUG-84669
Pick-to: 5.15 5.15.2
Change-Id: I2bf2d49211ade7cc511277f35fb1a247e7048b31
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Testing the mouseMoveCount before XFAIL'ing before then testing the
mouseRelaseCount was anyway wrong.
Change-Id: I666f143ff15088562fc63f833f5785f870de6f26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 1918c689d7.
The template gets always instantiated in QObjectPrivate::connect, even
if the connection types is not Qt::(Blocking)QueuedConnection. For
non-queued connections we however support using incomplete types in
connect. The only way to fix this would be to make the connection type a
template parameter of QObjectPrivate::connect (or at lesat pass some
compile time constant indicating "blocking"-ness) along, so that we can
use if constexpr instead of if. As all involved classes are private, we
can postpone investigating this solution to 6.1
Change-Id: Ieffaf015f8e60ca6ac6f85eb9e2756e480060b4f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch reverts the last attempt to fix it:
4a1de178c9.
In addition, instead of using imprecise QTest::qSleep()
we trigger a single shot PreciseTimer twice
and gather the measurements in lambdas.
We wait for lambdas to be executed - we give it
twice as much time as is in theory needed.
Afterwards we verify all the data collected in lambdas.
Fixes: QTBUG-82825
Change-Id: Ib691f5f23a92fb8b41a24f7b603981d9c9450ddc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's been deprecated since Qt 4.1.
Task-number: QTBUG-85816
Change-Id: Iafc6340716556f54fc5472c60035bb57461b842f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For historical reasons Qt Concurrent reports QUnhandledException in
case if an exception that is not derived from QException is thrown
from a worker thread. Changing this behavior may not be a good idea,
since the existing user code may rely on it. Changed QUnhandledException
to wrap the std::exception_ptr to the actual exception, so that the
users can obtain the information about the thrown exception if needed.
[ChangeLog][QtCore][QUnhandledException] Improved QUnhandledException to
store the std::exception_ptr to the actual exception thrown from a
QtCocnurrent worker thread.
Change-Id: I30e7c1d3e01aff6e1ed9938c421da0a888f12066
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Ubuntu changed the default level from 1 to 2 and not accepting our
RSA 1024 anymore. While we are not testing the TLS library's strength,
we re-generate a ceritficiate to shut the thing (the botched, 'fixed' OpenSSL)
up for good.
Task-number: QTBUG-86187
Change-Id: I6151ce5210972ae938e52731157742910363afbe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When converting the year as an integer via the locale then it can add
in group separators which would not be desired here. Therefore it should
be converted via the QDate approach to get the right output for the year.
Fixes: QTBUG-86307
Fixes: QTBUG-85966
Pick-to: 5.15
Change-Id: I092bd1e5f69e544843fd5f28c96b94c9066490c5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Our tls certificate/key are a bit on the old side and need to be
updated. But for now let's lower the openssl level. In this case openssl
complains about the server's key used for DHE being too short.
Task-number: QTBUG-86187
Change-Id: I142a7d52f7599f60b8f4f3ff3ac5ce61fed06b4c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The old test harness used to spit out stderr only, but
to be on the safe side we spit out both.
Change-Id: Ib8e57fd1b0e4d8542ac552a6fe58c07016df7f5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When cross-building Qt with CMake to target qemu configs in the CI,
we specify the -DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON option to also
cross-build tools (like qmake).
In this case, $prefix/bin/qmake points to the cross-compiled qmake,
and the shell script that wraps the host qmake is called
$prefix/bin/host-qmake instead.
In such a scenario, tst_qmake ends up running the cross-compiled
qmake, which thinks that it's being run on device (via user-space
qemu emulation) and doesn't specify the sysroot when computing include
paths, link paths, etc. This causes the test building to fail in
various ways.
To fix the test, check for the existence of the host-qmake wrapper,
and if it exsists use it instead.
Task-number: QTBUG-86053
Change-Id: Iaa4afdf11b17f23abef873dd15b1ed950126ab8c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The qdatetimeparser was not tested explicitly so far, but only
implicitly in tst_qdate / tst_qdatetime / tst_qdatetimeedit etc.
This made it difficult to test some corner cases, especially in the
context of unfinished dates, i.e. dates which are invalid, but could
become valid by adding more characters. This is used to validate
user input in qdatetimeedit.
Task-number: QTBUG-84334
Change-Id: I27202849abb1b7cad96d3e25f7ac81ce85272b2a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move it to the section requiring SSL tests since it
requires QSslConfiguration.
Change-Id: I5c807976ce75fa5967bddb8edd7788dbfbb89375
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* Rearrange the documention to match the enumeration order.
Fixes: QTBUG-87037
Change-Id: Iad001351e0f309e694b8bbd503813017e6586a21
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This mostly reverts change 76e8e8e9c8.
The reason is that storing non relocatable types inline in
QVariants storage would implicitly make QVariant non relocatable.
Fixes: QTBUG-87686
Change-Id: I2a09b1dcdd907d60085dccf17f987086dcba878c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a almost trivial benchmark for QString::number(int).
Change-Id: Ice67eaf28e8d7b235fd5ec5e0b87b3b9053ae61e
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the existing “kitchen sink” test out of the way,
and rename it to “kitchensink”
Change-Id: I121260e640bb2810a94f8112fcea212e97055fb3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QList::parameter_type is defined and used to give better
performance e.g. for arithmetic types. Let's use it consistently
in QList API instead of const T &
Change-Id: I2e12bd83f55679b55a14fbb23ab6172a9cf7bbcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
on Ubuntu 20.04
There is some issue with the glib event dispatcher.
Task-number: QTBUG-87728
Pick-to: 5.15
Change-Id: I4d64206898dd2c8356d5fc51a68c2e5759b38aac
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
RFC2822 requires times to be in the format 'HH:mm' or 'HH:mm:ss'.
We did not have unit tests to check that malformed RFC2822
dates are rejected. This patch adds such unit tests for
truncated hours/minutes/seconds.
Change-Id: Id5b9390112e633e617722439ad59439e6aeba841
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt Quick, when we deliver an item-specific QTouchEvent that contains
only the subset of eventpoints that are inside the Item's bounds,
traditionally the Item can accept the event to tell the delivery logic
that the event is handled and doesn't need to be delivered further.
But an Item cannot be expected to have total scene awareness; so now,
the delivery is "done" only when all eventpoints in the original event
are accepted. This behavior has been working well enough already due to
logic in QQuickWindow that iterates the points and accepts them if the
event is accepted; but it seems appropriate to move this enforcement
into QPointerEvent itself. Making setAccepted() virtual gives us a
useful degree of freedom.
Event-handling code should alternatively use QEventPoint:setAccepted()
or QPointerEvent::setExclusiveGrabber() to take resonsibility for only
a subset of the touchpoints.
Another way to put it is that we treat QPointerEvent::setAccepted() as a
convenience method: accepting the QEventPoints is what counts (at least
in Qt Quick).
Change-Id: Icec42dc980f407bb5116f5c0852c051a4521105a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We cannot rely on "QString a; a.insert(0, u'A');" to give
a.capacity() >= 3, this is clearly an implementation detail. Changed
the check to a meaningful one
Task-number: QTBUG-87416
Change-Id: I2e017c1292d360e32b85b903361027485c08ea74
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Index of the last visible tab was not updated, if a new tab was inserted
after the current tab and before the last tab.
When the new tab is inserted before the last visible tab, the index of
the last tab increments by one.
When the new tab is inserted after the last visible tab, then the newly
inserted tab becomes the last visible.
Fixes: QTBUG-86898
Change-Id: I2f4b7f705261ec35a5aa7b883ecdddba25f007b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extract checkPositions helper function to re-use in the new test.
Task-number: QTBUG-86898
Change-Id: I5c8241b5701cd8c8c3e21607c385217d4b75e728
Reviewed-by: Jordi Pujol Foyo <jordi@vikingsoftware.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Expose event would not be sent when window was resized
Fixes: QTBUG-69155
Pick-to: 5.15
Change-Id: I81bf2d54f830a0dabf15398e1f25b55ff7ff4479
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Failure to copy m_inputEvent and m_pointerEvent actually left them
uninitialized, and resulted in random behavior in Qt Quick when
Flickable clones a pointer event for later replay.
Remove the comment about copying events being a "bad idea" in Qt 4,
while we're at it. Copying became more common in Qt 5, and we
probably won't be able to stop doing it now.
Change-Id: I40b6ba5ad696e7aaafbeefbca86eca00cab40616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike the 32-bit version, we can't go to a bigger integer type to do
the multiplication with. So instead accept looping. Both libstdc++ and
libc++ implement std::uniform_int_distribution this way anyway, but in a
far more complex way.
There is no looping if the "highest" is a power of two. The worst-case
scenario is when "highest" is one past a power of two (like 65). In that
case, we'll loop until the number is in range. Since all bits have equal
probability of being zero or one, there's a 50-50 chance that the most
significant useful bit will be set[*], in which case we'll need to loop
and we again get the same probability. So on average, we only need two
iterations to get an acceptable result.
[*] There's also a possibility that the other bits are such that the
number is still in range. For 65, we'd need the other 5 bits to be zero
(64 is a valid result), but the probability of that is only 1/2^5 =
3.125%. The bigger "highest" is, the closer we get to zero, so
approximate by saying that never happens and instead calculate that the
most significant useful bit is the controlling one.
[ChangeLog][QtCore][QRandomGenerator] Added 64-bit versions of the
bounded() functions. They are useful in conjunction with Qt 6's 64-bit
container sizes, so code that used to call bounded(list.size()) in Qt 5
will continue to compile and work in Qt 6.
Fixes: QTBUG-86318
Change-Id: I3eb349b832c14610895efffd16356927fe78fd02
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This saves duplicating them with its own flags.
Task-number: QTBUG-85700
Change-Id: I9e938322fd787282cfd9f941f83af8c0d76aaa9d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As requested by a ### Qt 6 comment. This then implied a few other
functions weren't constexpr, which broke some tests.
Task-number: QTBUG-85700
Change-Id: I6522a9b2d7a74e117442121400a1d7198d323967
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the factor() test, drop scale() which should be
covered already.
Change-Id: Id2079536a91c7e9f7199960bdf6b33489d0a6670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use the new screen config feature of the offscreen
platform plugin to run tests on virtual screen setup.
This has the benefit that we can auto-test the QHighDpiScaling
implementation (as well as its usage in QtGui) on any platform
with a fixed mock screen setup which does not rely on physical
screen configuration.
Test the following configurations:
- three screens: 96 DPI. (reference)
- three screens: 192 DPI
- three screens: mixed (high) DPI
Change-Id: I2fac889d896cf30ab2a79c306cee22177ad8f4ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This way we can actually modify the container. Previously the interface
was rather useless.
Change-Id: I278aae46999862ada115c9066a010d7de5cde4ff
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The high-level iterable interfaces should coerce the types of most
QVariants passed to the expected ones. To do this, move the type
coercion code into qvariant.{h|cpp} so that it is available to the
QVariantRef specializations.
The exception are variants passed to the find() functions of associative
iterables. Here, we should not coerce values we cannot convert to the
default-constructed keys. Instead we return end() in such cases.
Fixes: QTBUG-87687
Change-Id: I0bd4e5c4e4e270dd3bf36cb3fb115794828077f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QString::toUpper() now insists we use its return, so the benchmark
won't compile unless we do so. Also document the helper macro used by
the tests, to explain why it's even there at all.
Change-Id: I830f121d92867bcd09277ecdeb1c764413b34fa6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The test macro's first three parameters were given a QLocale:: prefix
by the macro, but the last three weren't. Save uses of the macro the
need to repeat the prefix in all parameters, thereby making the test
cases easier to read. Also, we can compare enum values, rather than
casting them to int; and, when a test fails, reporting the enum name
is far more informative than reporting the integer that represents it.
Change-Id: Ib0360c51049333b4a00ea84e271c99db6724334f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This revealed that the test was always broken; it had simply never
actually been checked.
Done-with: Andreas Buhr <andreas.buhr@qt.io>
Change-Id: I85ac7ba30738fa3b41bf8440a059ee3fabb4726b
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Added some tests that trigger an assert without this check.
(Drive-by: renamed one QTime test to match its QDate(Time)? counterparts.)
Change-Id: I3d6767605fdcca13a9b4d43a32904f584eb57cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This simplifies code that would otherwise need to use the setter and
getter in addition to the bindable.
Change-Id: Iec6510b4f578f5b223c63b3a0719257a0cf2463d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is useful in cases like error handling when you need to print the
name of the lock file.
Change-Id: Ife4901ed53ae81d19e68cce7f1c173ef3745d56f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We now require C++17 and thus C++11 features or standard headers
should no longer be conditional.
Change-Id: I6b72306e809f71ec77acf7ffb97e2ed2ccd96e9d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Silence the warning, and test event delivery in addition.
Change-Id: I59c49a2ac70ecd32429116b76643700a7ad5ce3e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These classes should not inherit from each other
anymore in Qt 6. The reason is that this makes
the 95% case of using a non-recursive mutex
much slower than it has to be.
This way, QMutex can now inline the fast path
and be pretty much as fast as QBasicMutex is
in Qt 5. They actually use the same code paths
now. The main difference is that QMutex allows
calling tryLock() with a timeout, which that
is not allowed for QBasicMutex.
[ChangeLog][QtCore][QMutex] QMutex does not support
recursive locking anymore. Use QRecursiveMutex for that
purpose. QRecursiveMutex does not inherit QMutex anymore
in Qt 6.
Change-Id: I10f9bab6269a9181a2e9f534fb72ce65bc76d989
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we're going to split QMutex and QRecursiveMutex into
separate classes, make sure QMutexLocker is prepared for that.
Change-Id: Id5e9a955d1db7c8ee663dd3811ad6448dad0aeae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The return value can be ignored here, so make intention clear.
Change-Id: I116869c47039b159db96f133b5850a2215873c2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test helpers are used both in the qtconcurrentmap tests and in the
qtconcurrentfilter tests. In the future, they should also be used
in generated tests. This patch moves the function out of the
qtconcurrentmap folder as it is not specific to 'map'.
Change-Id: Ie79a7ae3040a7eab7364a3aabf934158c7527b5a
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Tests the move semantics of QImage in Qt6.
Change-Id: Ia4d95f0b88ca7dde0daf85a0f53049b42b5be1a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
For iterators that return a value, don't use reference in ranged for,
and cast numeric literal to correct size type for QCOMPARE.
Change-Id: Idfd09dbc2ef3ab1bf025c7859ea6e2e9572bc9a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If a model only allows MoveAction, then calls in the view/widget subclasses'
dropEvent implementation to set the event's drop action to CopyAction
will fail. QAbstractItemView will then remove the item when QDrag::exec
returns.
Instead of abusing the event actions for this, store explicitly that the
dropEvent implementation already moved the item. If the flag is set,
don't remove the item.
In QListView, which uses moveRow to move items in the dropEvent handler,
handle the case that the model might not implement moveRows. In that
case, or when dropping an item onto another item (to overwrite data),
fall back to the default implementation of QAbstractItemView. Sadly, it
is impossible to know whether a model doesn't implement moveRows, or
whether the move failed for other reasons, so this requires a bit of
extra special case handling. QListView in IconMode is particularly odd
in that it moves the item in the view, but not in the model.
This follows up on fd894fd68e and fixes
additional issues discovered during debugging. Extend the existing unit
test; since drag'n'drop runs a modal, native event loop on most systems,
it still only runs on the Xcb platform.
Change-Id: I6c5377e2b097c8080001afe904d6d3e4aed33df4
Pick-to: 5.15
Fixes: QTBUG-87057
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Proposed during API review
Change-Id: I9c43e1915c50803ab69bfe07a91c05d2224b86c4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Changed QPromise::addResult() to return bool value. True is returned
when result is added and false is returned when e.g. promise is in final
state (canceled or finished) or when addResult() is called twice with
the same index as argument (in which case new value is rejected)
Updated QFutureInterface::reportFinished() that accepts optional result
as argument to align with other result adding methods. This function
is "internal" only (as of now), so no documentation update is needed
Change-Id: I2d63069246e5e5c8cf04529c22bb296faaaae53d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Interesting, it only exploded now - initially we were too fast (faster than
500 ms) so never noticed. Now that more tests with the similar event loop
handling were introduced, the last one was catching a single-shot timer
signal, accessing long dead object).
Fixes: QTBUG-87612
Change-Id: I52446fa7b08ef90a4742af3662da7837a8602941
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Tag them as [[maybe_unused]] to silence compiler on platforms where they
are not used.
Change-Id: I12243c0409c66863617f073f968e50f913c58a67
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's no longer used; the only calls to QApplicationPrivate::desktop
pass the default nullptr for QScreen, so all we need is a Qt::Desktop
type toplevel widget.
Include changes documentation about both the class and QApplication::desktop
being gone in Qt 6.
Change-Id: I22d6e93cabc6aaaefffe5e96942886a2ef4e0609
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a peer closes the connection, the device remains opened for reading
purposes. However, we should disable writing on disconnected socket.
Otherwise, if the user issues a write() call, a new pipe writer object
will be created and the write call occurs with invalid handle value.
Pick-to: 5.15
Change-Id: Id136798c7663df1fce7ed0aa4e3c6f5c65218a11
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In order to prevent too much voodoo in backends like D3D11, the input
layout is expected to specify the slice index for vecX that are part of
an unrolled matrix.
Also deoptimize the instancing manual test to exercise a matrix too
instead of just vectors.
Change-Id: If2dcbcbc483645ce2420b2f87dda765b95da6e80
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Use a simpler constexpr to generate type name on gcc This
works around an ICE on gcc in release mode when compiling
with PCH enabled. As the type we're getting from Q_FUNC_INFO is
already in a somewhat normalized form, this requires significanlty
less processing and esp. not a recursive constexpr method which
I suspect triggers the ICE.
Fix integer type conversions to also properly normalize long long
values (to q(u)longlong. Make sure the mapping also works on
MSVC, where long long types get mapped to __int64. Also, normalize
unsigned short and unsigned char to ushort and uchar, respectively, to
follow the convention set by uint and ulong.
Add some test cases to verify the mappings.
Change-Id: I3dec5764450bf22ab6f066597803c3f46c2cd5ac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It's not possible to connect to microsoft.com with Schannel TLS 1.3 for
some reason (also tested with Internet Explorer), but other sites work
fine. Must be something they have to iron out for later.
In my experience this needs a preview release of Windows. One of my
machines is opted into the dev channel of Windows where they enabled TLS
1.3 by default, and it works well in my tests except for the part above.
On my other machine, after enabling TLS 1.3 through the registry, I fail
to complete the handshake with any site. So around March/April next year
is when this code would activate for most people.
MinGW apparently defines NTDDI_VERSION as the one for Windows Server
2003, so it currently doesn't build the new TLS 1.3 code. In Qt (as a
project) we could consider setting this higher, but that's out of scope
for this patch!
Fixes: QTBUG-81294
Change-Id: If329959c3a30ecbfbb8c0d335cc39ccb6d012890
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
tst_QApplication::sendEventsOnProcessEvents() and
tst_QItemDelegate::editorKeyPress()
There is some issue with the glib event dispatcher.
Task-number: QTBUG-87137
Pick-to: 5.15
Change-Id: I79a983192edef3c3560a4296cc9dea2dfc2ee1b0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
One can call addResult(value, index) twice and consequently set the
value twice by the same index. This seems rather strange and probably
should not be allowed. This commit rejects setting results when there's
already a valid result by that index. Consequently, this fixes memory
leaks caused by N-times-called addResult(..., index)
Fixes: QTBUG-86828
Change-Id: I77494f2cb73ce727ffad721cfcdcaa420899eb25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Using std::begin() and std::end() forces the user to have const begin()
and end() member functions being defined for the passed container. This
is because std::declval<T>() returns rvalue which forces the compiler
to select std::{begin, end}()(const Container &c) overloads and an test
for a presence of const {begin, end}() methods.
Change-Id: I9d96d9f73891ece53224f1741a1334500f7b35ad
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit 7544c242cb, which
reverted the first removal of the parameter under the assumption
that it caused flakiness in tests.
The flakiness was instead caused by changes to the wait functions
in QTest, so remove the parameter again.
Change-Id: I98154d5d7268375aebbcb09de757e75d9b765c5f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This commit restricts operator<<(QDebug lhs, QVariant rhs) to only work
if rhs is actually of type QVariant (instead of any type convertible to
QVariant). This is especially important as
a) we check in QMetaType whether (slightly simplified) QDebug{} <<
std::declval<T>() is valid, and if so, register a function which
simply uses the operator.
b) In QVariant, we ask the metatype system for the contained types
registered debug function and then use it.
If a type now does not have its own operator<< for QDebug, but is
implicitly convertible to QVariant containing itself, this would lead to
an infinite recursion, when trying to use qDebug with that type. The
registered function in a) would just convert the type to QVariant, and
then ask the QVariant to print itself.
Disallowing implicit conversions in qDebug in general was considered
(i.e. adding template<typename T> operator<<(T) = delete in QDebug ),
but discarded as it breaks too much code relying on conversions.
Fixes: QTBUG-87122
Change-Id: Ib709297670cbc6cc307efd0dfd8e5b0279df9414
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the difference between the families sizes is just 1 where one of them
is 0 in size then we can fallback to the family in that case.
Pick-to: 5.15
Fixes: QTBUG-87267
Change-Id: I62b25b06c88000b4d7defe91871c07873b1fc792
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QtConcurrent::filtered test-cases for move-only containers were failing
to compile, because it is assumed that the passed container should have
value_type defined.
Change-Id: I3e9e5ebc07704cb98a15b125ae8bd5b5a84d497a
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QFuture::takeResult() currently returns std::vector instead of QList,
because QList does not support move-only types. Disable this method
until QList is fixed to work with move-only types in Qt 6.1.
Also did minor doc-fixes.
Change-Id: I87feaf75d9433a3b540edd00039c3e21d6994985
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As propertyobservers can execute arbitrarily complex code, they can also
modify the obsever list in multiple ways. To protect against list
corruption resulting from this, we introduce a protection scheme which
makes the list resilient against modification.
A detailed description of the scheme can be found as a comment in
QPropertyObserverPointer::notify.
Task-number: QTBUG-87153
Change-Id: I9bb49e457165ddc1e4c8bbdf3d3c9fbf5ff27e94
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Implement the better rounding mechanism that was previously blocked
by requiring C++14 to be constexpr.
Change-Id: I4e5b179ce0703f5c0b41c3f0ea00d28dfe53740c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The original restriction to UniformBuffer was due to the GL backend
where there is no GL buffer object for QRhiBuffers with usage
UniformBuffer. However, we can still implement this for cases when
there is a true GL buffer object underneath. With other backends it
should all work as-is already.
This becomes useful when one has buffers with usage Vertex that need
full updates every frame. (f.ex. instance data)
Unfortunately this involves renaming the function. But while at it, add
an autotest case as well.
Change-Id: Iff59e4509a8bae06654cc92fe8428bd79eb012fb
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The qsb files seem to be out of date for those two.
Change-Id: Id832e872667cac4d364e13c440011109a6dbdc7f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Draw 25000 cubes while doing a uniform buffer update for each.
Change-Id: I2216641c8bf7c6ea147fe3edd679317b472e1f04
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Pending results were never cleared by result store. This led to memory
leaks when the results never transitioned to "visible" results
Change-Id: I674302eb51542ad5f4d918da68d616428c73ae9f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It was previously casting enum values to int, which produced unhelpful
answers when a test failed. Better to have them as enum values that
get printed as their names, which are actually informative.
Change-Id: I1bf2971b1426bdbbc321bb48f45ee3e5799e76ec
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QDateTime's addDays(), addMonths() and addYears() neglected to check
for validity before doing their job, with the result that they could
produce "valid" (but wildly inappropriate) results if used on an
invalid date-time. Added tests for this case (and the boundary).
Change-Id: I7b0d638501cb5d875a678cde213547a83ed7529e
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's range of possible values is wider than anyone generally
needs, but let's not do confusing things when someone does overflow
it.
Change-Id: Ifbaf7a0f02cd3afe7d3d13c829bf0887eba29f7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Previously, a QDate representing more than about 0.3 gigayears before
or after the epoch would overflow the millisecond count and produce a
"valid" date-time that didn't represent the date and time passed to
its constructor. Changed to detect such overflow and produce an
invalid date-time instead, if it happens.
Corrected some tests that wrongly expected to be able to represent
extreme date-time values with every time-spec. The (milli)seconds
since epoch are from UTC's epoch, so converting to another offset,
zone or local time may give a value outside the actual range. Added
some tests for the actual exact bounds.
Task-number: QTBUG-68855
Change-Id: I866a4974aeb54bba92dbe7eab0a440baf02124f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Also correct two comments which lied about the year being tested.
Change-Id: I5be491a2b2c1e0c3b49d6ff9a8de852e17321cff
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As suggested by the message from QTestLib. This, indeed, fixed the
sadistic test. Also, make sure resources are not leaked.
Pick-to: 5.15
Fixes: QTBUG-87009
Change-Id: Id693a5a562ea5ebacc853e5fc0ab9654ba851e72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Currently
A a;
QVariant::fromValue(&a).value<const A*>() == nullptr;
Still casting non const to const is safe, and worked in Qt5.
After this change
A a;
QVariant::fromValue(&a).value<const A*>() == &a;
Change-Id: I257049d084c712b00a338a2943d379aa478e0981
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Change types returned and accepted by capacity-related QArrayDataPointer
functions to qsizetype:
1) QArrayData (underlying d-ptr) works with qsizetype
2) QArrayDataPointer::size is of type qsizetype
3) All higher level classes that use QADP (e.g. containers)
cast capacity to qsizetype in their methods
Additionally, fixed newly appeared warnings through qtbase
Change-Id: I899408decfbf2ce9d527be7e8b7f6382875148fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Unit tests are added to make sure QtConcurrent works on
move-only sequences.
Change-Id: I1d066f75ceab9cef98832e96c5827103cbfd72a8
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Even before adding support for fractional hours, a fraction of a
minute might potentially have represented a whole number of seconds by
a fractional part that, due to rounding, was less than the whole
number of seconds by less than half a millisecond. Previously, the
parsing would have clipped the fractional part at 999 milliseconds, in
the preceding second, instead of correctly rounding it up to the whole
second.
For QTime::fromString(), which can't represent 24:00, and for
TextDate, which doesn't allow 24:00 as a synomym for the next day's
0:0, applying such rounding to 23:59:59.999999 would produce an
invalid result from a string that does represent a valid time, so use
the nearest representable time, as previously.
Added some tests and amended others.
[ChangeLog][QtCore][QDateTime] QDateTime and QTime, in fromString()
with format ISODate or TextDate, now allow a fractional part of the
hour, minute or seconds to round up to the next second (hence
potentially into the next minute, etc.) when this is the closest
representable value to the exact fractional part given. When rounding
up would turn a valid result into an invalid one, however, the old
behavior of clipping to 999 milliseconds is retained.
Change-Id: I8104848d246cdb4545a12819fb4b6755da2b1372
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
