The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, the C locale was treated as English because each back-end
takes the locale's bcp47Name(), which maps C to en. However, the C
locale has its own rules; which QString helpfully implements; so we
can delegate to it in this case. Extended this to sort keys, where
possible. Clean up existing implementations in the process.
Extended tst_QCollator::compare() with some cases to check this. That
required wrapping the test's calls to collator.compare() in a sign
canonicalizer, since it can return any -ve for < or +ve for >, not
just -1 and +1 for these cases (and it'd be rash to hard-code specific
negative and positive values, as they may vary between backends).
[ChangeLog][QtCore][QCollator] Added support for collation in the C
locale, albeit this is only well-defined for ASCII. Collation sort
keys remain unsupported on Darwin.
Fixes: QTBUG-58621
Change-Id: I327010d90f09bd1b1816f5590cb124e3d423e61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this change we inserted newline only if an option has a
description and ended up with an arbitrary long line with all options.
[ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help
output to show two options or more in the same line if the options didn't
have a description.
Task-number: QTBUG-70174
Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is already blacklisted for macOS 10.12 and reproducing in 10.13.
Task-number: QTBUG-61037
Change-Id: I464e42d0ae5ab24104250edc69a90454ba605eaa
Reviewed-by: Liang Qi <liang.qi@qt.io>
The test was computing GMT with a suffix added to it for the offset;
but when the offset is zero there's no need for it. Cleaned up the
logic so that it only checks for a "padded to two digits with zero" if
the number is single-digit (and use string arithmetic in preference to
wantonly complex .arg()ing; and use simpler names). Since we don't
try to check anything unless GMT does appear in the string (because
the actual zone ID was used, instead of GMT with an offset), the case
of zero offset has nothing more to check than that GMT was present,
the precondition for checking anything.
Task-number: QTBUG-70322
Change-Id: I0b8abe7e63d9d72fa9cf32f188b47a78a849044b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a QStringView::compare(QString, CaseSensitivity) but it's
good that the symmetric also exists
Change-Id: Ic789f11d41eb8cfa393cb51c19bd1f89bb87d912
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The table and macros weren't extensible enough for non-Latin-based
languages.
Change-Id: I950f06de57aaf6bd0b24e0056e4acee2fb655f3d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have #if-ery on Q_OS_DARWIN controlling an expectation of gettign
"GMT+1" and "GMT+2" instead of "CET" and "CEST" in two tests; this
turns out to not be a deficiency of macOS so much as of how we
configure Coin's VMs. While we fix that, we need to ignore failures
in these tests, so that we can pull the #if-ery out and clear the
blacklist once the VMs are set up properly.
Task-number: QTBUG-70149
Change-Id: If3577200cf980b3329161ab3eea7bd2e9d0124e0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit fd38c97a6c.
Apparently our actual VMs for 10.13 don't get this right, although the
ones used in testing did (prompting the fix this reverts). We
probably have mis-configured VMs, but this is the quick-fix to get
development moving again.
Task-number: QTBUG-70149
Change-Id: Ib96755d8e21d9b226e22fc985f13f34fa04117b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
CLDR up to somewhere between v29 (used by 5.9) and v31.0.1 (used by
5.10 and later) claimed Costa Ricans don't include fractions in their
currency; now it claims they expec two digits. Apparently one of them
does expect those digits, so this is the regression test I'll be
cherry-picking back to LTS, to accompany the CLDR updates they need.
Task-number: QTBUG-70093
Change-Id: I138772cc6013fa74de4f7c54b836cac83421eab2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After updating MinGW toolchain from 5.3.0 to 7.30 test starts to fail.
Task-number: QTBUG-69947
Change-Id: I850d854b27e1cb4e1dd2cb600e8e79bd18bff4a0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
This patch refactors the wildcardToRegularExpression method to generate
a simpler regular expression. It also fixes some shortcomings of the
previous implementation.
Tests have been updated to ensure all cases are properly supported.
Change-Id: I454e3fe8fe0bb663b2f319d6fa2fa8aec626c50d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Deep down in CoreFoundation, ICU is used, and this test triggers a
heap-buffer-overflow with AddressSanitizer. Disable this test for macOS
until Apple fixes it.
Task-number: QTBUG-69875
Change-Id: I43e4a69708be8cde3bde87c57db21f5b717f96b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The API originally proposed was flawed in the sense that the setter
function would use a modified version of the parameter given which would
have make it a black box for the user. This patch fixes that by removing
that setter and providing a static method that will return the pattern
suitably modified to be used by QRegularExpression the same way the
escape method does.
[ChangeLog][Core][QRegularExpression] Implemented support for wildcard
patterns through a static method.
Change-Id: I0054bcaffd7525dac569f54fa81f73b7e4544b2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That way, we'll get told all the cases that fail, rather than only the
first. Provoked by investigation of failures that turned out to be
caused by QTBUG-69875.
Change-Id: I8fa2902cbbcb307cbe1fdec2e7d8d6b0c3eb998a
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
The CLDR data contains eight locales with numeric territory codes, 001
for World, 150 for Europe and 419 for Latin America. The last was
already known in our enumdata.py, but as "Latin America and The
Caribbean", which is not supported by the CLDR, so I've amended it
while adding the other two. This gives us support for Esperanto and
Yiddish (among others).
[ChangeLog][QtCore][QLocale] Added support for World and Europe as
(numeric) "country" codes ("territory" in CLDR terms), thereby
enabling support for Yiddish and Esperanto, among other locales using
such codes.
Task-number: QTBUG-57802
Change-Id: Ibb1180fb720743a3a0589527649d10f3c9cd123d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests kludge round Apple's use of GMT+1 and GMT+2 as names for
CET and CEST on Darwin; but 10.13 actually gets the names right, so
side-step out of the kludge when on this version or later.
Change-Id: Icb8a2f3ac30f0f621a19042dc03e0d281782dd41
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
We had 30s and 60s only, which isn'tenough for the Qt CI.
Task-number: QTBUG-69741
Change-Id: I00e04a465fcf4fc1a462fffd154782999e84ef8b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The copy-assign operator tests against other.d being NULL but the
copy-constructor didn't. This can only matter if the value being
copied has been moved from, so we could probably replace with an
assertion in practice, but we should at least be consistent.
Amended test to check this case too; and verified new test crashes
without this fix.
Change-Id: I46872a677775944bbdf6a9112e719873e574ae60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCommandLineParser::addOption returns false in case of an error.
Tests should check it.
Change-Id: I3507e1c236a15a7c0a77c0c80f8dba65b664a535
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This function can be used to create std::array without the need
to explicitly provide the size of array. It also has a specialization
that allow to generate sorted array at compile time. Sorted array can
be beneficial for example in binary search.
Change-Id: Ifc7e06e451812fce2ab94293959db5e9cc038793
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
A RAII style class which calls a function at end of scope.
Example usage:
auto cleanup = qScopeGuard([] { <my cleanup code> ; });
[ChangeLog][QtCore] Introduced QScopeGuard.
Task-number: QTBUG-62894
Change-Id: Ife67f5c76255a1fafbae03367263da0bac9a0070
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Kept the intended word (rather than "number system" or "numeral
system" as might seem more natural) since CLDR's
common/supplemental/numberingSystems.xml uses numbering in its name
and in the XML tag-names in its contents. Thanks to Kari Oikarinen
for noticing, in review.
Change-Id: I85077611f9de8c4e812e1b5324fa2e99868b7b95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should improve reporting and ensure we know about each failing
case, not just the first, when one fails.
Change-Id: Ic00272201f69a2fd8508df23b1d746ea605aa539
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Cleaned up some related #if-ery in the process.
Change-Id: I70f3152f2096ec34f36782fa1c3329f51c9b34f0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Routine update in preparation for 5.12
* omitting Chakma because QLocale can't represent the zero digit,
* de_DE no longer uses vorm./nachm. but AM/PM
[ChangeLog][Third-party code] Updated CLDR to version 33.1
Task-number: QTBUG-67654
Change-Id: If20c47bb030abc3700b4f5a592152e617e2767c2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Rewrote some of them away, in the process, using string arithmetic.
Change-Id: Ie1a29abefab001889a22a8bc66c7eee608496786
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
This is preparation (the WS-only parts) for splitting up some
over-long lines, in the course of which I also fix some indentation.
Change-Id: I800490e328b5e16d40685dff04c09cd145d5eacf
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
There was no public API for doing case-insensitive comparisons
of QStringView.
Task-number: QTBUG-69389
Change-Id: I1b021eefec35e135b97fb87704c8dc137232d83d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
