On Wayland there is a special case when decorations are enabled,
where we post an initial update request to ensure widgets are
redrawn after the buffer is recreated (see
af7b60ade5c4be81cbc58eb18307c017d5594071 in qtwayland). To
make sure the test behaves the same on Wayland as on other
platforms, we disable client-side decorations when running
these tests.
The flag is primarily required for the requestUpdate() test
at the moment, but it is only queried once per application
run, so it has to be set before any tests are run.
Pick-to: 6.4
Fixes: QTBUG-100889
Change-Id: Ica6d744083ecae4a3722b6d04b956e7615f0dfe5
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The initial problem was in server not starting encryption, because
its certificate was rejected by OpenSSL (v3) saying 'weak md'.
After the certificate was replaced, we got another problem - due
to the fixed TLS v.1 protocol for both client and server - handshake
is interrupted early with 'tls v1 alert' and error message
saying about not found signature algorithms. Don't fix the protocol
version, use proper QSsl::SecureProtocols (default).
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I0f22f5304f4405933ad511195bc61c640518e7d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The certificate was using SHA-1 for signing its certificate, which is
considered 'not good enough' by some TLS libraries.
Regenerate it with SHA-512 and a larger RSA key.
Also include the files needed to generate it.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I535e047d540e663c8cec334695196044173949fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Batching the tests leads to one of the tests tst_qmetaobject and
tst_qmetaobject_compat not being registered in the batch. Attempts to
batch those together fail as batch test name is defined per-source,
which, in this rare case, is the same across the two targets.
Change-Id: I356931feabc004c39ba0b6863b5f64e06d739a58
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
OpenSSL v3 by default sets SECLEVEL = 2 unless overridden in conf files.
SECLEVEL >= 1 means TLS <= 1.1 is disabled. Remove cases that were
previously expected to work. Arguably, we should not test deprecated
protocols at all, but the cases expecting a failure still work
and logically correct.
Task-number: QTBUG-95123
Task-number: QTBUG-106018
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Ifa59fa902b433338dbed7abf086cfdef9470384c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was an old test written in a very low-level way, which perhaps is ok
to be independent of testlib in a few tests; OTOH, it was blacklisted
on a couple of platforms. Perhaps doing touch events the standard way
could be more stable.
While we're at it:
- verify that the touch events are accepted, and thus verify the new
bool return value from commit()
- implement paintEvent() to help understand the layout, and touchpoint
locations
- remove repeated QCOMPARE lines
- skip the test if window positioning fails
- try to un-blacklist it, on the assumption that window positioning
failure was the reason
Task-number: QTBUG-87025
Task-number: QTBUG-104656
Pick-to: 6.4
Change-Id: Ie22eb24abf95cd849990a56212be87d06ce8e574
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
[ChangeLog][QtCore][Meta Object] QMetaMethod::invoke(),
QMetaObject::invokeMethod(), and QMetaObject::newInstance() are no
longer limited to 10 arguments.
[ChangeLog][QtCore][Meta Object] The use of the Q_ARG macro is no longer
necessary when using QMetaMethod::invoke(), QMetaObject::invokeMethod(),
and QMetaObject::newInstance(). Types may now be passed
directly. Similarly, Q_RETURN_ARG can be replaced by the free function
qReturnArg().
[ChangeLog][Potentially Source-Incompatible Changes]
QMetaMethod::invoke(), QMetaObject::invokeMethod(), and
QMetaObject::newInstance() no longer support passing forward-declared
types in the argument list (it was possible to pass them by
const-ref). From Qt 6.5 onwards, all types in the argument list must be
fully defined.
[ChangeLog][Potentially Source-Incompatible Changes] Attempting to use
the internal types QArgument, QReturnArgument, QGenericArgument, or
QGenericReturnArgument directly with QMetaMethod::invoke(),
QMetaObject::invokeMethod() or QMetaObject::newInstance() may fail to
compile. Those are internal types that were never meant to be used
directly and will be removed in Qt 7. If really necessary, ensure all
arguments passed to those functions are directly using those classes and
not mixed with Q_ARG and Q_RETURN_ARG. Implementations of bindings to
other languages should contact the Qt development mailing list to
discuss options.
Change-Id: I36b24183fbd041179f2ffffd1701e3e8e47e0fba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The doc of QMetaEnum::valueToKey() says to use ::valueToKeys() instead
for flag types.
Pick-to: 6.4
Change-Id: I48e5ba47324137f2ce2710f1d876e93e7c562e9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This includes QDBusReply, QProperty, and QStringBuilder expressions.
The new constructor subsumes the QStringBuilder case without requiring
jumping though hoops to delay the definition of the ctor the way we
had to for the explicit QStringBuilder constructor, so remove the
explicit QStringBuilder one again.
[ChangeLog][QtCore][QAnyStringView] Can now be constructed from
anything that implicitly converts to either QString or QByteArray.
Fixes: QTBUG-105389
Change-Id: I0e584dd3e20d591381609a3329ef47cec7356ecc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Since qVersion() might be called also from C code, disable the parts of
qlibraryinfo.h that are relevant only for C++ code if __cplusplus is not
defined.
[ChangeLog][Potentially Source-Incompatible Changes] qVersion() is
moved from qglobal.h to qlibraryinfo.h, '#include <QtCore/QLibraryInfo>'
needs to be added where it's used.
Task-number: QTBUG-99313
Change-Id: I3363ef3fa4073114e5151cb3a2a1e8282ad42a4d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And include qcore_mac_p.h where needed.
Task-number: QTBUG-99313
Change-Id: Idb1b005f1b5938e8cf329ae06ffaf0d249874db2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we had code to default to zstd as the default algorithm instead of
"Best", we ended up not compressing anything.
[ChangeLog][rcc] Fixed a bug that caused rcc not to compress files with
any compression algorithm if the --no-zstd option was present.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-106012
Change-Id: Ic6547f8247454b47baa8fffd170fddae429f82d2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
With OpenSSL 3.0.5 we see X509_print giving us the text representation
not matching any of previous ones - mostly a question of spaces
and formatting. Let's add a proper version to compare against and
remove useless 0.9.8, 1.0.0, 1.0.1, - we don't support them anymore
and thus QSslCertificate::toText() will never give a match.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106017
Change-Id: Ida11321c23e74c7313acc682237ab78408cf2803
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
leaf.p12 is using RC2 for encryption and it's disabled by default
in openssl v3.
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-106017
Change-Id: I4edd0d29506d1e50b2b618b6a00cceeb4b156204
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test expects the helper libraries to contain the .dylib suffix
rather than .so.
Replace glob copying of the libraries (which depends on the underlying
shell) with manual copy calls.
This also ensures the libraries don't contain a _debug postfix in the
file name even in a debug build, which would break the tests.
Amends f8c1909320
Amends 1dff26dd95
Change-Id: I20361c33c4a1b9dd4b5273fcdb8cc79c9f266327
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Because this version does not seem to like MD5 which old cert was using.
Fixes: QTBUG-106019
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Id354d1e32acb0528685b2788ee9c7326c43397bd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][QtCore][Meta Objects] The QMetaObject::invokeMethod() taking
a method name by string, QMetaObject::newInstance(), and
QMetaMethod::invoke() now support more than 10 arguments.
[ChangeLog][QtCore][Meta Objects] The use of the Q_ARG and Q_RETURN_ARG
macros is now optional with QMetaObject::invokeMethod(),
QMetaObject::newInstance(), and QMetaMethod::invoke(): the type name
will be obtained from the C++ type (the same as QMetaType). The function
qReturnArg() can be used in place of the Q_RETURN_ARG macro. The macros
are still useful in rare conditions where the type was typedef'ed from
its original name.
Change-Id: I36b24183fbd041179f2ffffd17022a2b48c7639b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
For the case that a newly created and registered accessible
interface gets removed again from the cache before another one
gets registered, the next registered interface was
previously assigned the same "unique ID" again, which e.g. breaks
assistive technology when using caching
with AT-SPI, since that relies on the assumption
that the ID is actually unique for each object.
(But here, the new object was using the same object path
as the old one, so data from the old object would be
used for the new one.)
To prevent that from happening, increment the
counter for the next ID to try at the end of
QAccessibleCache::acquireId, so the next time
the method gets called, it doesn't try again
whether the same ID as used previously is
available again.
For consistency, also rename the variable used
for the counter from lastUsedId to nextId.
This also adds a corresponding test case.
Fixes: QTBUG-105962
Pick-to: 6.4
Change-Id: Iddf4f3b35c57895bcfbb623a5377edf8344ab6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The paletteChanged() and fontChanged() signals were deprecated
in Qt 6.0, but the test was still using them unconditionally.
This patch guards the usage of the deprecated signals with
the usual QT_DEPRECATED_SINCE(6, 0) check, so that the test
can be built and run with QT_DISABLE_DEPRECATED_UP_TO >= 0x060000
This commit amends 68ea9c0227
Task-number: QTBUG-104858
Change-Id: Idb2da6d91afcdb664f325f23ec625947c9a7fac0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The patch includes the following replacements:
* QMetaType::type("name") -> QMetaType::fromType<Type>().id()
* QMetaProperty::type() -> QMetaProperty::typeId()
* QVariant::Type -> QMetaType::Type
* qRegisterMetaType<T>("name") -> qResigeterMetaType<T>()
* The static QMetaType::{load,save} methods are replaced with
non-static versions
* Replace QCOMPARE(property.type(), QVariant::UserType) with
QCOMPARE_GT(property.typeId(), QMetaType::User), because the
deprecated type() method was treating each custom type
(id >= QVariant::UserType) as QVariant::UserType, while the
typeId() method simply returns the actual id.
As a drive-by: remove unneeded QMetaType registration tests
as we have tst_QMetaType to check it.
Task-number: QTBUG-104858
Change-Id: Ia08e002efdf07ff83366a5193164dba96a956f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The most common changes are:
* Replace QMetaType::type("name") with QMetaType::fromName("name").id()
or QMetaType::fromType<Type>().id()
* QMetaType::typeName(int) -> QMetaType(int).name()
* QMetaType::typeFlags(int) -> QMetaType(int).flags()
* QMetaType::metaObjectForType(int) -> QMetaType(int).metaObject()
* The static QMetaType::{load,save} methods are replaced with
non-static versions
* The static QMetaType::{create,destroy,construct, destruct} methods
are guarded by QT_DEPRECATED_SINCE calls. The tests are also
extended with non-static calls where they were missing. Fixed
potential memory-leaks in these tests.
Add separate unit-tests for deprecated APIs and guard them with
QT_DEPRECATED_SINCE
As a drive-by: use nullptr instead of 0 in some places
Task-number: QTBUG-104858
Change-Id: I4b0cdd29bc197c186b835002372240aae3098c33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use consistent defines across both tests in the directory
Change-Id: Idd84603135c8c164d09ae41d5faa7ca3a5fc7c3c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Since Qt 6.0, QMetaType stores the name obtained from the C++ compiler,
which means we know a type like Qt::Alignment by its proper, full name
of QFlags<Qt::AlignmentFlag>. However, the meta object records only the
bare name of the enumeration, not the full flags.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-105932
Fixes: QTBUG-96185
Change-Id: Ic6547f8247454b47baa8fffd170eab977e306377
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Initially, stream receive window's size was quite significant.
At some point when dealing with a server that did not want
our windows' sizes and was closing the connection (they only
accept 64K) we reduced this size, which ended in a regression
with download speed significantly throttled. We return the old
values (or even more, presuming we have 10 multiplexed streams
and not 100). And also making QNAM consistent with its documentation
(it was not updated).
[ChangeLog][QtNetwork] Stream receive window that HTTP/2 protocol in QNAM is using
increased to 214748364 octets (from the previous 64K) not to throttle download
speed. Clients, working with servers, not accepting such parameters,
must set HTTP/2 configuration on their requests accordingly.
Fixes: QTBUG-105043
Pick-to: 6.4 6.3 6.2
Change-Id: I252b6b5eefe92a7304dad15c67928d5a57d9597f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unifies our approach to calling CoInitializeEx and CoUninitialize,
removing a lot of boilerplate in the process, and also fixes a few
bugs where we would incorrectly balance our calls to CoInitializeEx
and CoUninitialize.
The optimistic approach of qfilesystemengine_win.cpp of calling
CoCreateInstance without initializing the COM library explicitly
has been removed, as calling CoInitializeEx should be a noop in
the situation where it's already been loaded.
Change-Id: I9e2ec101678c2ebb9946504b5e8034e58f1bb56a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It does a check to ensure you aren't comparing outside the container.
Fixes: QTBUG-106001
Pick-to: 6.2 6.3 6.4
Change-Id: Ic6547f8247454b47baa8fffd170eef346b7f4f24
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The function is used the internal window activation machinery and
should not be called by user code.
Many tests still use this function, and should be ported over to
QWidget::activateWindow(). For now they are using the private
helper in QApplicationPrivate, so that we can progress with the
public API deprecation.
Change-Id: I29f1575acf9efdcbae4c005ee9b2eb1bb0c8e5b5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
9a369a25dd added a
QAccessibleEvent ctor that takes a QAccessibleInterface*
instead of a QObject*.
Retrieving the QAccessibleInterface* later is done using the
interface's unique ID stored in the m_uniqueId member.
However, the fact that m_uniqueId is a member
of the union alongside with m_child means that setting
a child via QAccessibleEvent::setChild also overwrites
the stored unique ID, which breaks retrieving the accessible
interface later.
Fix this for the case where the QAccessibleInterface has
an associated QObject by assigning m_object in the ctor as well.
This means that a QAccessibleEvent created using either of the two
constructors (the one taking the QObject* and the one taking
the QAccessibleInterface* associated with the object) now behaves
the same.
Fixing the case where there is no associated QObject would require
further changes (e.g. adding a member for the QAccessibleInterface*
or making the m_uniqueId member a separate member instead of having
it in a union with m_child). However, I see no way to do so without
breaking the ABI, so that is left unchanged.
This also adds a corresponding test case.
Fixes: QTBUG-105988
Pick-to: 6.4
Change-Id: I71a548af0277a5034e9e207f066fa3e25c5393f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QScopedPointer::take() call in comparison() test was used to
avoid a double-deletion error, because the test is creating two
QScopedPointer instances referencing the same memory.
Avoid the take() call by providing a custom DummyDeleter and
managing the memory by the extarnal std::unique_ptr.
As the test now has no test-cases for QScopedPointer::take()
calls, create a new test for this deprecated API, and guard
it with QT_DEPRECATED_SINCE checks.
Task-number: QTBUG-104858
Change-Id: Iecc28d44d76c9ce5835e6b1a1df7db30e2a9ca25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The most common changes are:
* removing the explicit tests for deprecated APIs
* QMultiMap::insertMulti() -> QMultiMap::insert()
* QMultiMap::insert(QMultiMap) -> QMultiMap::unite(QMultiMap)
Add separate tests for the deprecated APIs, and guard them
with QT_DEPRECATED_SINCE() checks.
Task-number: QTBUG-104858
Change-Id: Ifb79212d07f20028d93d75f2b32ec3785cc93b22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QVariant::Type -> QMetaType::Type.
* Guard the test for deprecated fromUtf16(const ushort *) overload with
QT_DEPRECATED_SINCE check.
* Use fromUtf16(const char16_t *) overload in other places.
As a drive-by: fix formatting in the affected lines.
Task-number: QTBUG-104858
Change-Id: I9fa3a935bca36e97f934f673e2fc07b451c72872
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Logging category lcQpaDockWidgets was used in both dock widget test
and implementation. This dual use caused static builds to fail.
This patch replaces lcQpaDockWidgets with a test specific logging
category in tst_QDockWidget.
Pick-to: 6.4 6.3 6.2
Change-Id: I02cdfdaee9c1c1840126d803139b3d271aeac236
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
For those, moc does know their type ID, and yet they may be still
forward-declared in the C++ side, so the meta object may have recorded a
null pointer in the metatype array.
Fixes: QTBUG-105832
Change-Id: Ic6547f8247454b47baa8fffd170dae07c0813dc7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Implement auto test for (de)serialization of dock widget properties.
Test settings compatibility by importing a hard coded byte array.
Test serialization format and sequence by comparing expected and real
serialization output.
Test dock widget closing behavior (QTBUG-103474) to ensure that
no closing inconsistency is caused by serialization incompatibility.
Extensively document/comment the test to ensure failures can be easily
interpreted in the future.
Task-number: QTBUG-103474
Change-Id: I3c1589c2c291b2ed56334d09b85536d4c7388f92
Pick-to: 6.4 6.3 6.2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These functions are marked as deprecated in future Qt releases.
Task-number: QTBUG-104858
Change-Id: I25d2932455d8c9e3e2d722b1c48fc2cfa2d1e679
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Guard the test that checks the deprecated protocol versions
Task-number: QTBUG-104858
Change-Id: I1b76e08d8fc985abf758bf86198fe3d33e5497d4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
An item delegate might override destroyEditor to merely reparent the
existing editor out of the item view for later reuse, rather than
actually destroying the editor.
As of d0dffdfc01, the code calling
closeEditor() - which calls destroyEditor - might explicitly set focus
back to the item view parent of the editor. This needs to handle that
the parent of the editor might no longer be valid after the closeEditor
call returns, and rather store the old parent widget explicitly.
Add a test case that segfaults with nullptr access without the fix.
Fixes: QTBUG-105231
Pick-to: 6.4 6.3 6.2
Change-Id: I04a355673823c4941865f7a575864e991ceeb5f0
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The client does not know its global window position on Wayland,
so testing for this will not work.
Pick-to: 6.4
Fixes: QTBUG-100888
Change-Id: Ibdfc84f1b33d25223dbd740603ce4783c21afc70
Reviewed-by: Inho Lee <inho.lee@qt.io>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
