When dealing with a universal build of Qt, we would end up
using the QT_ARCH as the architecture for user projects,
but this architecture is always the primary one that Qt
was configured with.
Instead of relying on QT_ARCH, we start writing QT_ARCHS
(plural) to qconfig.pri, based on CMAKE_OSX_ARCHITECTURES,
and then use that to initialize QMAKE_APPLE_DEVICE_ARCHS.
We then resolve the active arch using uname -m, matching
what CMake does.
We still feed all the available architectures to the
Makefile or Xcode project, so that the user can build
for any of the available architectures without needing
a reconfigure.
Fixes: QTBUG-93760
Change-Id: I0d338241ba4d944ca36d85371e9c4df7dbc4f269
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This increases link time significantly; instead set
"-g4" or the new "-gsource-map" only if source maps
are enabled.
Change-Id: Ibe2d438d48e9ae2fce5f79d4e8a9f17c01cf2485
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If we already have the list of Android ABI in BUILDS, it's not
necessary to generate extra resource while Qt build.
Amends: 58556afb69
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Fixes: QTBUG-88031
Change-Id: I344efe6c477461659a360281da59c4abeae18fc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Xcode's new build system checks duplicated entries when building. Qmake wants to embed
the launch screen for all types of configurations (static libraries etc.) which makes Xcode bail
out with "Multiple commands produce LaunchScreen.storyboard".
Pick-to: 6.0 6.1 5.15 5.12
Task-number: QTBUG-71035
Change-Id: I5c028e687f16e046b12156c1a8a89540deba4d3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we don't feature it for CMake, there's little point in keeping it
for qmake.
Pick-to: 6.1
Change-Id: I7f17d2536510c0b94dca9767036ceab7ec08e1d8
Reviewed-by: Tino Pyssysalo <tino.pyssysalo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Includes both minimum deployment targets and minimum sdk
versions.
As per supported Apple platforms versions which was done
in qt/qtdoc at
8807fdedce29cbbd7662fcd745234da30eace3fb
For Qt for iOS 6.0.x we only bump the minimum
deloyment target because applications seem to crash with iOS 12.4+,
and it's better to have a build error than a runtime error.
The minimum required sdk will not be bumped for 6.0.x, so we don't
accidentally break someone's existing build, given that 6.0 is already
released.
Pick-to: 6.1
Task-number: QTCREATORBUG-23574
Change-Id: I3046384164f2d7fdbd0cfd16dcb85e0d60bc56ce
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
To not disturb the qmake build we kept syncqt.pl in <src>/bin but
installed it to libexec. This is not necessary anymore.
This also removes the need for having syncqt.pl in both, bin and libexec
in the build dir of qtbase.
Pick-to: 6.1
Fixes: QTBUG-91076
Change-Id: I44b014ea41e3f00c420e02fd5c76f11169340b8c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix condition when adding qmake_immediate to resources. This condition
was wrongly positive in any non-android case, but also had to check for
BUILD emptiness or build_pass. This cause issue because
qmake_qmake_immediate was added to the RESOURCES variable earlier, than
actually generated.
Fixes: QTBUG-88031
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Change-Id: I38dad858a7e81ab709e622ec24baa8f9b80970fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The macOS SDKs now follow the same major/minor version scheme as iOS,
where the major version is bumped for each OS release.
Pick-to: 6.0 5.15
Change-Id: I021421a9c58bb1ae64bc0c63b4215f14e4ada358
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake variable QMAKE_APPLE_DEVICE_ARCHS was added for iOS,
to support universal builds, as the QT_ARCH is a single value.
Since the qmake macOS builds are non-universal (at the moment),
we remove the hard-coded value for QMAKE_APPLE_DEVICE_ARCHS on
macOS, and let the normal architecture test resolve the arch,
like on other platforms.
To ensure that the following configuration tests are run with
an -arch argument, we trigger a commit of the preliminary Qt
configuration after running the architecture test. This is not
strictly necessary, but makes it clearer what's going on during
configure.
The device_and_simulator configuration option was used by the
iOS toolchain, and needed to be moved up in the configuration
test order to not break later tests.
The logic in mac/default_post.prf for both Xcode and Makefiles
to add -arch flags was kept as is, based on the existing
variable, to avoid too many changes to this logic.
The logic in toolchain.prf was amended to make it clear and
ensure that it only applies to iOS builds. macOS builds do
not have this issue.
Pick-to: 6.0
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I70db7e4c27f0d3da5d0af33cb491d72c312d3fa8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Play Store now accept only app with target
SDK version set to 29 or above
Pick-to: 6.0
Change-Id: If38f20c88fd6b0e6f29939cdf3d2eb793c0e1489
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Testing seems to indicate building against the 11.0 SDK works fine,
and doesn't opt in to any new behaviors on Big Sur that Qt isn't
ready for.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I7da11cf25f2be7443c94ba7a4e9cd99dc1034455
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Updates due to newer compiler version in QNX7.1
Task-number: QTBUG-88300
Change-Id: If9bbc08d49a077d80174a1807e069b5d4ef61c0d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When doing static builds any project which uses same
libraries as qtbase 3rd party libraries will most likely
end up in broken binaries, since symbols will be
included twice. Moreover, libraries can have different
versions. Install 3rd party headers and meta data for:
* qtlibpng
* qtfreetype
* qtharbuzz
Pick-to: 5.15
Task-number: QTBUG-87154
Change-Id: I243dff9a12a95af20dee414f55bb762b8d579c81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
According to Microsoft's docs, /OPT:ICF is enabled by the
linker by default unless /OPT:NOICF or /DEBUG is specified.
If we are in RelWithDebInfo mode, /DEBUG is passed to the
linker to generate debug symbols, however, it caused the
identical COMDAT folding be disabled. We now pass /OPT:ICF
to the linker explicitly to prevent this.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/opt-optimizations?view=msvc-160
Change-Id: I02099edb81034ace7bb19f1164d57829e3979a5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
*Not* using /permissive- exposes Qt and client apps to interesting
bugs and/or build failures, (e.g. QTBUG-87225, or
19b5520abf). We demand strict
conformance by any other compiler, it's time to demand it from
MSVC too.
The Windows headers themselves are clean starting from the
Windows Fall Creators SDK (10.0.16299.0), and moreover Qt 6 will
drop WinRT; therefore, the comment in the mkspecs does not apply
any more.
Since /permissive- implies /Zc:referenceBinding, drop that
option. The other implied options are set on MSVC < 2017,
but I leave them in to avoid tinkering with the fragile lists
of C/C++ flags.
Rename the CMake internal helper function to better describe
what it does.
Fixes: QTBUG-85633
Fixes: QTBUG-85637
Fixes: QTBUG-85635
Fixes: QTBUG-88244
Change-Id: Ie03fddb61aa066fdc14b7231c22e7108b4a02fbb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qtdeclarative's QtQml module adds a dynamically generated qmldir file to
its RESOURCES which is located outside the source directory.
Previously this caused qmake to generate an invalid alias for the qmldir file.
Now the relative path is discarded properly.
Fixes: QTBUG-88204
Change-Id: Ia689d9d110db092cee595bf44fcbb6d57783fded
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Depending on the presence and behavior of HEADER_MODULE/header_module
in CMake and qmake land, the module.pri might end up with an empty
module line, which means adding the module via QT_PRIVATE += entrypoint
will not link to the static library.
To avoid this problem we write an explicit module entry (QT.foo.bar)
into the same module.pri file as the one generated by qt_module,
where the auto-generated one has header_module enabled, and hence
no link behavior, while the manually written entry has a module
component, and will ensure linkage to the static library.
Change-Id: Ib98484f74410fab45c4d109f3610028200fba0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The flags go before the library in the final linker line, as opposed
to the dependencies declared in LIBS.
This allows us to declare the flags for the entrypoint
in the project file of the entrypoint, instead of in
a standalone prf.
Change-Id: I35c054fe9fdaa6add7cd0e8ba3f7304f975ff80f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On the qmake-side we had exports, but they were quoted.
Change-Id: I95af4b927079691cab6403fec850f345ba181a00
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Beginning with Visual Studio 2017, vswhere should be used to discover
Visual Studio installations. Installations of 2019 and up are not even
registered inside the registry anymore, so vswhere is the only way to
obtain information about these.
Pick-to: 5.15
Task-number: QTVSADDINBUG-819
Change-Id: Ibd8b2c4d38c7925857887f39e750e87a33f08bf9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As a result of b5af140809 the link dependency to the
mingw32 static library was ordered after the entrypoint
library, which resulted in the WinMain symbol not being
found during linking due to how the static linker processes
archives.
Fixes: QTBUG-87725
Change-Id: I8e075f91f7f06dcdc618a4e0ae6d9c1d832888c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to ignore this option in qt_configure.prf.
This amends 077ea0c633.
Task-number: QTBUG-87049
Change-Id: If05b16a95d0830df9ca63961576981f8983820cc
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The use-case is relevant for other platforms as well.
Now that Qt has a module system we can also replace a lot of the
hand crafted logic for linking with simpler constructs.
Change-Id: Ib6853aaf81bfea79c31f2de741d65b4b56f23ef6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The code only existed to avoid the auto-generated
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin), but nowadays
with bitcode enabled the code is not used, plus we end
up with this auto-generated file for other plugins anyways.
Change-Id: I91c8c88f4e825caab7d7d5250edaba8c57cb7374
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We want this in order to be able to export constexpr members.
Change-Id: I33ba7964ebee54fe656df983985d8d6fa0b99358
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The mkspec works with msvc 2019 as well. As 2017 is no
longer supported, we should reflect this reality in the
mkspecs naming.
Change-Id: Ib1165343d43fd50eebc5e4e598e653ddc4a9b1ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On Windows shell, using unix path format might not work, since the shell
expects backslash paths only.
Pick-to: 5.15
Task-number: QTBUG-87066
Change-Id: I51741b475c1ede11336df63ee1c6092c792c16ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
