#!/bin/sh ############################################################################# ## ## Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies). ## Contact: http://www.qt-project.org/legal ## ## This file is the build configuration utility of the Qt Toolkit. ## ## $QT_BEGIN_LICENSE:LGPL$ ## Commercial License Usage ## Licensees holding valid commercial Qt licenses may use this file in ## accordance with the commercial license agreement provided with the ## Software or, alternatively, in accordance with the terms contained in ## a written agreement between you and Digia. For licensing terms and ## conditions see http://qt.digia.com/licensing. For further information ## use the contact form at http://qt.digia.com/contact-us. ## ## GNU Lesser General Public License Usage ## Alternatively, this file may be used under the terms of the GNU Lesser ## General Public License version 2.1 as published by the Free Software ## Foundation and appearing in the file LICENSE.LGPL included in the ## packaging of this file. Please review the following information to ## ensure the GNU Lesser General Public License version 2.1 requirements ## will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ## ## In addition, as a special exception, Digia gives you certain additional ## rights. These rights are described in the Digia Qt LGPL Exception ## version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ## ## GNU General Public License Usage ## Alternatively, this file may be used under the terms of the GNU ## General Public License version 3.0 as published by the Free Software ## Foundation and appearing in the file LICENSE.GPL included in the ## packaging of this file. Please review the following information to ## ensure the GNU General Public License version 3.0 requirements will be ## met: http://www.gnu.org/copyleft/gpl.html. ## ## ## $QT_END_LICENSE$ ## ############################################################################# #------------------------------------------------------------------------------- # script initialization #------------------------------------------------------------------------------- # the name of this script relconf=`basename $0` # the directory of this script is the "source tree" relpath=`dirname $0` relpath=`(cd "$relpath"; /bin/pwd)` # the current directory is the "build tree" or "object tree" outpath=`/bin/pwd` #license file location LICENSE_FILE="$QT_LICENSE_FILE" [ -z "$LICENSE_FILE" ] && LICENSE_FILE="$HOME/.qt-license" if [ -f "$LICENSE_FILE" ]; then tr -d '\r' <"$LICENSE_FILE" >"${LICENSE_FILE}.tmp" diff "${LICENSE_FILE}.tmp" "${LICENSE_FILE}" >/dev/null 2>&1 || LICENSE_FILE="${LICENSE_FILE}.tmp" fi # later cache the command line in config.status OPT_CMDLINE=`echo $@ | sed "s,-v ,,g; s,-v$,,g"` # initialize global variables QMAKE_SWITCHES= QMAKE_VARS= QMAKE_CONFIG= QTCONFIG_CONFIG= QT_CONFIG= SUPPORTED= QMAKE_VARS_FILE=.qmake.vars DEVICE_VARS_FILE=.device.vars :> "$QMAKE_VARS_FILE" :> "$DEVICE_VARS_FILE" #------------------------------------------------------------------------------- # utility functions #------------------------------------------------------------------------------- shellEscape() { echo "$@" | sed 's/ /\ /g' } # Adds a new qmake variable to the cache # Usage: QMakeVar mode varname contents # where mode is one of: set, add, del QMakeVar() { case "$1" in set) eq="=" ;; add) eq="+=" ;; del) eq="-=" ;; *) echo >&2 "BUG: wrong command to QMakeVar: $1" ;; esac echo "$2" "$eq" "$3" >> "$QMAKE_VARS_FILE" } shellArgumentListToQMakeListHelper() { local retval for arg in "$@"; do retval="$retval \"$arg\""; done echo "$retval" } # Convert a string usable on a shell command line into word-by-word quoted # qmake list. shellArgumentListToQMakeList() { # eval is needed for the shell to interpret the backslash escape sequences eval shellArgumentListToQMakeListHelper "$@" } # Helper function for getQMakeConf. It parses include statements in # qmake.conf and prints out the expanded file getQMakeConf1() { while read line; do case "$line" in include*) inc_file=`echo "$line" | sed -n -e "/^include.*(.*)/s/include.*(\(.*\)).*$/\1/p"` current_dir=`dirname "$1"` conf_file="$current_dir/$inc_file" if [ ! -f "$conf_file" ]; then echo "WARNING: Unable to find file $conf_file" >&2 continue fi getQMakeConf1 "$conf_file" ;; *load\(device_config\)*) conf_file="$DEVICE_VARS_FILE" if [ ! -f "$conf_file" ]; then echo "WARNING: Unable to find file $conf_file" >&2 continue fi getQMakeConf1 "$conf_file" ;; *) echo "$line" ;; esac; done < "$1" } getQMakeConf2() { $AWK ' BEGIN { values["LITERAL_WHITESPACE"] = " " values["LITERAL_DOLLAR"] = "$" } /^[_A-Z0-9.]+[ \t]*\+?=/ { valStart = index($0, "=") + 1 append = 0 if (substr($0, valStart - 2, 1) == "+") { append = 1 } variable = substr($0, 0, valStart - 2 - append) value = substr($0, valStart) gsub("[ \t]+", "", variable) gsub("^[ \t]+", "", value) gsub("[ \t]+$", "", value) ovalue = "" while (match(value, /\$\$(\{[_A-Z0-9.]+\}|[_A-Z0-9.]+)/)) { ovalue = ovalue substr(value, 1, RSTART - 1) var = substr(value, RSTART + 2, RLENGTH - 2) value = substr(value, RSTART + RLENGTH) if (var ~ /^\{/) { var = substr(var, 2, length(var) - 2) } ovalue = ovalue values[var] } value = ovalue value ovalue = "" while (match(value, /\$\$system\((.*?)\)/)) { ovalue = ovalue substr(value, 1, RSTART - 1) cmd = substr(value, RSTART + 9, RLENGTH - 10) value = substr(value, RSTART + RLENGTH) while ((cmd | getline line) > 0) { ovalue = ovalue line } close(cmd) } value = ovalue value combinedValue = values[variable] if (append == 1 && length(combinedValue) > 0) { combinedValue = combinedValue " " value } else { combinedValue = value } values[variable] = combinedValue } END { for (var in values) { print var "=" values[var] } } ' } getQMakeConf3() { echo "$2" | $AWK "/^($1)=/ { print substr(\$0, index(\$0, \"=\") + 1) }" } # relies on $QMAKESPEC being set correctly. parses include statements in # qmake.conf and prints out the expanded file getQMakeConf() { if [ -z "$specvals" ]; then specvals=`getQMakeConf1 "$QMAKESPEC/qmake.conf" | getQMakeConf2` fi getQMakeConf3 "$1" "$specvals" } getXQMakeConf() { if [ -z "$xspecvals" ]; then xspecvals=`getQMakeConf1 "$XQMAKESPEC/qmake.conf" | getQMakeConf2` fi getQMakeConf3 "$1" "$xspecvals" } compilerSupportsFlag() { cat >conftest.cpp </dev/null 2>&1 } # $1: newline-separated list of default paths # stdin: input path # stdout: input path or nothing filterDefaultPaths() { local path path=`cat` echo "$1" | grep "^$path\$" > /dev/null || echo "$path" } filterIncludePath() { filterDefaultPaths "$DEFAULT_INCDIRS" } filterLibraryPath() { filterDefaultPaths "$DEFAULT_LIBDIRS" } filterPathOptionsHelper() { local flag defpaths sep p path flag=$1; shift defpaths=$1; shift sep= for p in "$@"; do path=${p#$flag} if [ "x$path" != "x$p" ]; then path=`echo "$path" | filterDefaultPaths "$defpaths"` test -z "$path" && continue fi # Re-quote for shell & qmake p=`echo "$p" | sed 's,[^ ]* .*,"&",g'` printf "%s%s" "$sep" "$p" sep=" " done echo } # $1: flag # $2: newline-separated list of default paths # stdin: list of command line options # sdout: stdin without the options naming default paths filterPathOptions() { # The eval does escape interpretation for us eval filterPathOptionsHelper $1 "\"$2\"" "`cat`" } filterIncludeOptions() { filterPathOptions -I "$DEFAULT_INCDIRS" } filterLibraryOptions() { filterPathOptions -L "$DEFAULT_LIBDIRS" } #------------------------------------------------------------------------------- # device options #------------------------------------------------------------------------------- DeviceVar() { case "$1" in set) eq="=" ;; *) echo >&2 "BUG: wrong command to QMakeVar: $1" ;; esac echo "$2" "$eq" "$3" >> "$DEVICE_VARS_FILE" } resolveDeviceMkspec() { result=$(find "$relpath/mkspecs/devices/" -type d -name "*$1*" | sed "s,^$relpath/mkspecs/,,") match_count=$(echo "$result" | wc -w) if [ "$match_count" -gt 1 ]; then echo >&2 "Error: Multiple matches for device '$1'. Candidates are:" tabbed_result=$(echo "$result" | sed "s,^, ,") echo >&2 "$tabbed_result" echo "undefined" elif [ "$match_count" -eq 0 ]; then echo >&2 "Error: No device matching '$1'" echo "undefined" else echo "$result" fi } #------------------------------------------------------------------------------- # operating system detection #------------------------------------------------------------------------------- # need that throughout the script UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # detect the "echo without newline" style. usage: echo $ECHO_N "$ECHO_C" if echo '\c' | grep '\c' >/dev/null; then ECHO_N=-n else ECHO_C='\c' fi #------------------------------------------------------------------------------- # window system detection #------------------------------------------------------------------------------- BUILD_ON_MAC=no PLATFORM_MAC=no if [ -d /System/Library/Frameworks/Carbon.framework ]; then BUILD_ON_MAC=yes PLATFORM_MAC=maybe fi BUILD_ON_MSYS=no if [ "$OSTYPE" = "msys" ]; then BUILD_ON_MSYS=yes fi #----------------------------------------------------------------------------- # Qt version detection #----------------------------------------------------------------------------- QT_VERSION=`grep '^# *define *QT_VERSION_STR' "$relpath"/src/corelib/global/qglobal.h` QT_MAJOR_VERSION= QT_MINOR_VERSION=0 QT_PATCH_VERSION=0 if [ -n "$QT_VERSION" ]; then QT_VERSION=`echo $QT_VERSION | sed 's,^# *define *QT_VERSION_STR *"*\([^ ]*\)"$,\1,'` MAJOR=`echo $QT_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\1,'` if [ -n "$MAJOR" ]; then MINOR=`echo $QT_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\2,'` PATCH=`echo $QT_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\3,'` QT_MAJOR_VERSION="$MAJOR" [ -z "$MINOR" ] || QT_MINOR_VERSION="$MINOR" [ -z "$PATCH" ] || QT_PATCH_VERSION="$PATCH" fi fi if [ -z "$QT_MAJOR_VERSION" ]; then echo "Cannot process version from qglobal.h: $QT_VERSION" echo "Cannot proceed." exit 1 fi #------------------------------------------------------------------------------- # check the license #------------------------------------------------------------------------------- COMMERCIAL_USER=ask CFG_DEV=no CFG_RTOS_ENABLED=yes EditionString=Commercial earlyArgParse() { # parse the arguments, setting things to "yes" or "no" while [ "$#" -gt 0 ]; do CURRENT_OPT="$1" UNKNOWN_ARG=no case "$1" in #Autoconf style options --enable-*) VAR=`echo $1 | sed "s,^--enable-\(.*\),\1,"` VAL=yes ;; --disable-*) VAR=`echo $1 | sed "s,^--disable-\(.*\),\1,"` VAL=no ;; --*=*) VAR=`echo $1 | sed "s,^--\(.*\)=.*,\1,"` VAL=`echo $1 | sed "s,^--.*=\(.*\),\1,"` ;; --no-*) VAR=`echo $1 | sed "s,^--no-\(.*\),\1,"` VAL=no ;; -h|help|--help|-help) if [ "$VAL" = "yes" ]; then OPT_HELP="$VAL" COMMERCIAL_USER="no" #doesn't matter we will display the help else UNKNOWN_OPT=yes COMMERCIAL_USER="no" #doesn't matter we will display the help fi ;; --*) VAR=`echo $1 | sed "s,^--\(.*\),\1,"` VAL=yes ;; -*) VAR=`echo $1 | sed "s,^-\(.*\),\1,"` VAL="unknown" ;; *) UNKNOWN_ARG=yes ;; esac if [ "$UNKNOWN_ARG" = "yes" ]; then shift continue fi shift UNKNOWN_OPT=no case "$VAR" in developer-build) CFG_DEV="yes" ;; commercial) COMMERCIAL_USER="yes" ;; opensource) COMMERCIAL_USER="no" ;; *) UNKNOWN_OPT=yes ;; esac done } earlyArgParse "$@" if [ "$COMMERCIAL_USER" = "ask" ]; then while true; do echo "Which edition of Qt do you want to use ?" echo echo "Type 'c' if you want to use the Commercial Edition." echo "Type 'o' if you want to use the Open Source Edition." echo read commercial echo if [ "$commercial" = "c" ]; then COMMERCIAL_USER="yes" break elif [ "$commercial" = "o" ]; then COMMERCIAL_USER="no" break fi done fi if [ -f "$relpath"/LICENSE.PREVIEW.COMMERCIAL ] && [ $COMMERCIAL_USER = "yes" ]; then # Commercial preview release [ "$PLATFORM_MAC" = "maybe" ] && PLATFORM_MAC=yes Licensee="Preview" Edition="Preview" QT_EDITION="QT_EDITION_DESKTOP" LicenseType="Technology Preview" elif [ $COMMERCIAL_USER = "yes" ]; then # one of commercial editions [ "$PLATFORM_MAC" = "maybe" ] && PLATFORM_MAC=yes # read in the license file if [ -f "$LICENSE_FILE" ]; then . "$LICENSE_FILE" >/dev/null 2>&1 if [ -z "$LicenseKeyExt" ]; then echo echo "You are using an old license file." echo echo "Please install the license file supplied by Digia," echo "or install the Qt Open Source Edition if you intend to" echo "develop free software." exit 1 fi if [ -z "$Licensee" ]; then echo echo "Invalid license key. Please check the license key." exit 1 fi else if [ -z "$LicenseKeyExt" ]; then echo echo $ECHO_N "Please enter your license key: $ECHO_C" read LicenseKeyExt Licensee="Unknown user" fi fi # Key verification echo "$LicenseKeyExt" | grep ".....*-....*-....*-....*-.....*-.....*-...." >/dev/null 2>&1 \ && LicenseValid="yes" \ || LicenseValid="no" if [ "$LicenseValid" != "yes" ]; then echo echo "Invalid license key. Please check the license key." exit 1 fi ProductCode=`echo $LicenseKeyExt | cut -f 1 -d - | cut -b 1` PlatformCode=`echo $LicenseKeyExt | cut -f 2 -d -` LicenseTypeCode=`echo $LicenseKeyExt | cut -f 3 -d -` LicenseFeatureCode=`echo $LicenseKeyExt | cut -f 4 -d - | cut -b 1` # determine which edition we are licensed to use case "$LicenseTypeCode" in F4M) LicenseType="Commercial" case $ProductCode in F) Edition="Universal" QT_EDITION="QT_EDITION_UNIVERSAL" ;; B) Edition="FullFramework" EditionString="Full Framework" QT_EDITION="QT_EDITION_DESKTOP" ;; L) Edition="GUIFramework" EditionString="GUI Framework" QT_EDITION="QT_EDITION_DESKTOPLIGHT" ;; esac ;; Z4M|R4M|Q4M) LicenseType="Evaluation" QMakeVar add DEFINES QT_EVAL case $ProductCode in B) Edition="Evaluation" QT_EDITION="QT_EDITION_EVALUATION" ;; esac ;; esac if [ -z "$LicenseType" -o -z "$Edition" -o -z "$QT_EDITION" ]; then echo echo "Invalid license key. Please check the license key." exit 1 fi # verify that we are licensed to use Qt on this platform LICENSE_EXTENSION= case "$PlatformCode" in *L) CFG_RTOS_ENABLED=yes PlatformCode=`echo "$PlatformCode" | sed 'h;y/8NPQRTZ/UCWX9M7/;x;G;s/\(.\)....\(.\)./\1\2/'` ;; *) CFG_RTOS_ENABLED=no PlatformCode=`echo "$PlatformCode" | sed 's/.$//'` ;; esac ### EMBEDDED_QPA logic missing ### case "$PlatformCode,$PLATFORM_MAC" in X9,* | XC,* | XU,* | XW,* | XM,*) # Qt All-OS LICENSE_EXTENSION="-ALLOS" ;; 8M,* | KM,* | S9,* | SC,* | SM,* | SU,* | SW,* | X9,* | XC,* | XU,* | XW,*) # Qt for Embedded Linux LICENSE_EXTENSION="-EMBEDDED" ;; 6M,* | N7,* | N9,* | NX,*) # Embedded no-deploy LICENSE_EXTENSION="-EMBEDDED" ;; FM,* | LM,yes | ZM,no) # Desktop LICENSE_EXTENSION="-DESKTOP" ;; *) Platform=Linux/X11 [ "$PLATFORM_MAC" = "yes" ] && Platform='Mac OS X' echo echo "You are not licensed for the $Platform platform." echo echo "Please use the contact form at http://qt.digia.com/contact-us" echo "to upgrade your license to include the $Platform platform, or install" echo "the Qt Open Source Edition if you intend to develop free software." exit 1 ;; esac if test -r "$relpath/.LICENSE"; then # Generic, non-final license LICENSE_EXTENSION="" line=`sed 'y/a-z/A-Z/;q' "$relpath"/.LICENSE` case "$line" in *BETA*) Edition=Beta ;; *TECHNOLOGY?PREVIEW*) Edition=Preview ;; *EVALUATION*) Edition=Evaluation ;; *) echo >&2 "Invalid license files; cannot continue" exit 1 ;; esac Licensee="$Edition" EditionString="$Edition" QT_EDITION="QT_EDITION_DESKTOP" fi case "$LicenseFeatureCode" in B|G|L|Y) # US case "$LicenseType" in Commercial) cp -f "$relpath/.LICENSE${LICENSE_EXTENSION}-US" "$outpath/LICENSE" ;; Evaluation) cp -f "$relpath/.LICENSE-EVALUATION-US" "$outpath/LICENSE" ;; esac ;; 2|4|5|F) # non-US case "$LicenseType" in Commercial) cp -f "$relpath/.LICENSE${LICENSE_EXTENSION}" "$outpath/LICENSE" ;; Evaluation) cp -f "$relpath/.LICENSE-EVALUATION" "$outpath/LICENSE" ;; esac ;; *) echo echo "Invalid license key. Please check the license key." exit 1 ;; esac case "$LicenseFeatureCode" in 4|B|F|Y) CFG_RTOS_ENABLED=yes ;; 2|5|G|L) CFG_RTOS_ENABLED=no ;; esac if [ '!' -f "$outpath/LICENSE" ]; then echo "The LICENSE, LICENSE.GPL3 LICENSE.LGPL file shipped with" echo "this software has disappeared." echo echo "Sorry, you are not licensed to use this software." echo "Try re-installing." echo exit 1 fi elif [ $COMMERCIAL_USER = "no" ]; then # Open Source edition - may only be used under the terms of the GPL or LGPL. [ "$PLATFORM_MAC" = "maybe" ] && PLATFORM_MAC=yes Licensee="Open Source" Edition="OpenSource" EditionString="Open Source" QT_EDITION="QT_EDITION_OPENSOURCE" fi #------------------------------------------------------------------------------- # initalize variables #------------------------------------------------------------------------------- SYSTEM_VARIABLES="RANLIB STRIP OBJDUMP LD CC CXX CFLAGS CXXFLAGS LDFLAGS" for varname in $SYSTEM_VARIABLES; do qmakevarname="${varname}" # use LDFLAGS for autoconf compat, but qmake uses QMAKE_LFLAGS if [ "${varname}" = "LDFLAGS" ]; then qmakevarname="LFLAGS" elif [ "${varname}" = "LD" ]; then qmakevarname="LINK" fi cmd=`echo \ 'if [ -n "\$'${varname}'" ]; then QMakeVar set QMAKE_'${qmakevarname}' "\$'${varname}'" fi'` eval "$cmd" done # Use CC/CXX to run config.tests mkdir -p "$outpath/config.tests" rm -f "$outpath/config.tests/.qmake.cache" cp "$QMAKE_VARS_FILE" "$outpath/config.tests/.qmake.cache" QMakeVar add styles "mac fusion windows" # QTDIR may be set and point to an old or system-wide Qt installation unset QTDIR # the minimum version of libdbus-1 that we require: MIN_DBUS_1_VERSION=0.93 # initalize internal variables CFG_CONFIGURE_EXIT_ON_ERROR=yes CFG_PROFILE=no CFG_STRIP=yes CFG_GUI=auto # (yes|no|auto) CFG_WIDGETS=yes CFG_QCONFIG=full CFG_DEBUG=auto CFG_MYSQL_CONFIG= CFG_DEBUG_RELEASE=no CFG_FORCEDEBUGINFO=no CFG_SHARED=yes CFG_SM=auto CFG_XSHAPE=auto CFG_XSYNC=auto CFG_XVIDEO=auto CFG_XINERAMA=runtime CFG_XFIXES=runtime CFG_ZLIB=auto CFG_SQLITE=qt CFG_GIF=auto CFG_PNG=yes CFG_LIBPNG=auto CFG_JPEG=auto CFG_LIBJPEG=auto CFG_XCURSOR=runtime CFG_XRANDR=runtime CFG_XRENDER=auto CFG_MITSHM=auto CFG_OPENGL=auto CFG_OPENVG=auto CFG_OPENVG_LC_INCLUDES=no CFG_OPENVG_SHIVA=auto CFG_OPENVG_ON_OPENGL=auto CFG_EGL=auto CFG_SSE=auto CFG_FONTCONFIG=auto CFG_LIBFREETYPE=auto CFG_SQL_AVAILABLE= QT_DEFAULT_BUILD_PARTS="libs tools examples" CFG_BUILD_PARTS="" CFG_NOBUILD_PARTS="" CFG_RELEASE_QMAKE=no CFG_AUDIO_BACKEND=auto CFG_V8SNAPSHOT=auto CFG_QML_DEBUG=yes CFG_JAVASCRIPTCORE_JIT=auto CFG_PKGCONFIG=auto CFG_STACK_PROTECTOR_STRONG=auto CFG_SLOG2=auto CFG_SYSTEM_PROXIES=no # Target architecture CFG_ARCH= CFG_CPUFEATURES= # Host architecture, same as CFG_ARCH when not cross-compiling CFG_HOST_ARCH= CFG_HOST_CPUFEATURES= # Set when the -arch or -host-arch arguments are used OPT_OBSOLETE_HOST_ARG=no CFG_USE_GNUMAKE=no CFG_XINPUT2=auto CFG_XINPUT=runtime CFG_XKB=auto CFG_XCB=auto CFG_XCB_GLX=no CFG_EGLFS=auto CFG_DIRECTFB=auto CFG_LINUXFB=auto CFG_KMS=auto CFG_LIBUDEV=auto CFG_OBSOLETE_WAYLAND=no CFG_EVDEV=auto CFG_NIS=auto CFG_CUPS=auto CFG_ICONV=auto CFG_DBUS=auto CFG_GLIB=auto CFG_GSTREAMER=auto CFG_QGTKSTYLE=auto CFG_LARGEFILE=auto CFG_OPENSSL=auto CFG_PRECOMPILE=auto CFG_SEPARATE_DEBUG_INFO=no CFG_SEPARATE_DEBUG_INFO_NOCOPY=no CFG_REDUCE_EXPORTS=auto CFG_SSE2=auto CFG_SSE3=auto CFG_SSSE3=auto CFG_SSE4_1=auto CFG_SSE4_2=auto CFG_AVX=auto CFG_AVX2=auto CFG_REDUCE_RELOCATIONS=auto CFG_ACCESSIBILITY=auto CFG_ACCESSIBILITY_ATSPI_BRIDGE=no # will be enabled depending on dbus and accessibility being enabled CFG_IWMMXT=no CFG_NEON=auto CFG_MIPS_DSP=auto CFG_MIPS_DSPR2=auto CFG_CLOCK_GETTIME=auto CFG_CLOCK_MONOTONIC=auto CFG_MREMAP=auto CFG_GETADDRINFO=auto CFG_IPV6IFNAME=auto CFG_GETIFADDRS=auto CFG_INOTIFY=auto CFG_EVENTFD=auto CFG_RPATH=yes CFG_FRAMEWORK=auto CFG_MAC_HARFBUZZ=no DEFINES= D_FLAGS= I_FLAGS= L_FLAGS= RPATH_FLAGS= W_FLAGS= QCONFIG_FLAGS= XPLATFORM= # This seems to be the QMAKESPEC, like "linux-g++" XPLATFORM_MINGW=no # Whether target platform is MinGW (win32-g++*) XPLATFORM_MAEMO=no XPLATFORM_QNX=no PLATFORM=$QMAKESPEC QT_CROSS_COMPILE=no OPT_CONFIRM_LICENSE=no OPT_SHADOW=maybe OPT_VERBOSE=no OPT_HELP= CFG_SILENT=no CFG_ALSA=auto CFG_PULSEAUDIO=auto CFG_COREWLAN=auto CFG_PROCESS=yes CFG_ICU=auto CFG_FORCE_ASSERTS=no CFG_PCRE=auto QPA_PLATFORM_GUARD=yes CFG_CXX11=auto CFG_DIRECTWRITE=no # initalize variables used for installation QT_INSTALL_PREFIX= QT_INSTALL_DOCS= QT_INSTALL_HEADERS= QT_INSTALL_LIBS= QT_INSTALL_BINS= QT_INSTALL_LIBEXECS= QT_INSTALL_PLUGINS= QT_INSTALL_IMPORTS= QT_INSTALL_QML= QT_INSTALL_ARCHDATA= QT_INSTALL_DATA= QT_INSTALL_TRANSLATIONS= QT_INSTALL_SETTINGS= QT_INSTALL_EXAMPLES= QT_INSTALL_TESTS= CFG_SYSROOT= CFG_GCC_SYSROOT="yes" QT_HOST_PREFIX= QT_HOST_BINS= QT_HOST_DATA= #flags for SQL drivers QT_CFLAGS_PSQL= QT_LFLAGS_PSQL= QT_CFLAGS_MYSQL= QT_LFLAGS_MYSQL= QT_LFLAGS_MYSQL_R= QT_CFLAGS_SQLITE= QT_LFLAGS_SQLITE= QT_LFLAGS_ODBC="-lodbc" QT_LFLAGS_TDS= # flags for libdbus-1 QT_CFLAGS_DBUS= QT_LIBS_DBUS= # flags for Glib (X11 only) QT_CFLAGS_GLIB= QT_LIBS_GLIB= # flags for GStreamer (X11 only) QT_CFLAGS_GSTREAMER= QT_LIBS_GSTREAMER= # default qpa platform QT_QPA_DEFAULT_PLATFORM= #------------------------------------------------------------------------------- # check SQL drivers available in this package #------------------------------------------------------------------------------- # opensource version removes some drivers, so force them to be off CFG_SQL_tds=no CFG_SQL_oci=no CFG_SQL_db2=no CFG_SQL_AVAILABLE= if [ -d "$relpath/src/plugins/sqldrivers" ]; then for a in "$relpath/src/plugins/sqldrivers/"*; do if [ -d "$a" ]; then base_a=`basename "$a"` CFG_SQL_AVAILABLE="${CFG_SQL_AVAILABLE} ${base_a}" eval "CFG_SQL_${base_a}=auto" fi done fi CFG_IMAGEFORMAT_PLUGIN_AVAILABLE= if [ -d "$relpath/src/plugins/imageformats" ]; then for a in "$relpath/src/plugins/imageformats/"*; do if [ -d "$a" ]; then base_a=`basename "$a"` CFG_IMAGEFORMAT_PLUGIN_AVAILABLE="${CFG_IMAGEFORMAT_PLUGIN_AVAILABLE} ${base_a}" fi done fi #------------------------------------------------------------------------------- # parse command line arguments #------------------------------------------------------------------------------- # parse the arguments, setting things to "yes" or "no" while [ "$#" -gt 0 ]; do CURRENT_OPT="$1" UNKNOWN_ARG=no case "$1" in #Autoconf style options --enable-*) VAR=`echo $1 | sed "s,^--enable-\(.*\),\1,"` VAL=yes ;; --disable-*) VAR=`echo $1 | sed "s,^--disable-\(.*\),\1,"` VAL=no ;; --*=*) VAR=`echo $1 | sed "s,^--\(.*\)=.*,\1,"` VAL=`echo $1 | sed "s,^--.*=\(.*\),\1,"` ;; --no-*) VAR=`echo $1 | sed "s,^--no-\(.*\),\1,"` VAL=no ;; --*) VAR=`echo $1 | sed "s,^--\(.*\),\1,"` VAL=yes ;; #Qt plugin options -no-*-*|-plugin-*-*|-qt-*-*) VAR=`echo $1 | sed "s,^-[^-]*-\(.*\),\1,"` VAL=`echo $1 | sed "s,^-\([^-]*\).*,\1,"` ;; #Qt style no options -no-*) VAR=`echo $1 | sed "s,^-no-\(.*\),\1,"` VAL=no ;; #Qt style options that pass an argument -prefix|-docdir|-headerdir|-plugindir|-importdir|-qmldir|-archdatadir|-datadir|-libdir|-bindir|-libexecdir|-translationdir|-sysconfdir|-examplesdir|-testsdir|-depths|-make|-nomake|-platform|-xplatform|-device|-device-option|-sdk|-arch|-host-arch|-mysql_config|-sysroot|-hostdatadir|-hostbindir|-qpa|-qconfig) VAR=`echo $1 | sed "s,^-\(.*\),\1,"` shift VAL="$1" ;; #Qt style complex options in one command -enable-*|-disable-*) VAR=`echo $1 | sed "s,^-\([^-]*\)-.*,\1,"` VAL=`echo $1 | sed "s,^-[^-]*-\(.*\),\1,"` ;; -system-proxies) VAR=system-proxies VAL=yes ;; -no-system-proxies) VAR=system-proxies VAL=no ;; #Qt Builtin/System style options -no-*|-system-*|-qt-*) VAR=`echo $1 | sed "s,^-[^-]*-\(.*\),\1,"` VAL=`echo $1 | sed "s,^-\([^-]*\)-.*,\1,"` ;; #Options that cannot be generalized -k|-continue) VAR=fatal_error VAL=no ;; -opengl) VAR=opengl # this option may or may not be followed by an argument if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then VAL=yes else shift; VAL=$1 fi ;; -openvg) VAR=openvg # this option may or may not be followed by an argument if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then VAL=yes else shift; VAL=$1 fi ;; -hostprefix) VAR=`echo $1 | sed "s,^-\(.*\),\1,"` # this option may or may not be followed by an argument if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then VAL=$outpath else shift; VAL=$1 fi ;; -qtnamespace) VAR="qtnamespace" shift VAL="$1" ;; -qtlibinfix) VAR="qtlibinfix" shift VAL="$1" ;; -D?*|-D) VAR="add_define" if [ "$1" = "-D" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-D,,'` fi ;; -fpu) VAR="fpu" # this option may or may not be followed by an argument if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then VAL=no else shift VAL=$1 fi ;; -I?*|-I) VAR="add_ipath" if [ "$1" = "-I" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-I,,'` fi ;; -L?*|-L) VAR="add_lpath" if [ "$1" = "-L" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-L,,'` fi ;; -R?*|-R) VAR="add_rpath" if [ "$1" = "-R" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-R,,'` fi ;; -largefile) VAR="largefile" VAL="yes" ;; -l?*|-l) VAR="add_link" if [ "$1" = "-l" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-l,,'` fi ;; -F?*|-F) VAR="add_fpath" if [ "$1" = "-F" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-F,,'` fi ;; -fw?*|-fw) VAR="add_framework" if [ "$1" = "-fw" ]; then shift VAL="$1" else VAL=`echo $1 | sed 's,-fw,,'` fi ;; -W*) VAR="add_warn" VAL="$1" ;; #General options, including Qt style yes options -*) VAR=`echo $1 | sed "s,^-\(.*\),\1,"` VAL="yes" ;; *) UNKNOWN_ARG=yes ;; esac if [ "$UNKNOWN_ARG" = "yes" ]; then echo "$1: unknown argument" OPT_HELP=yes ERROR=yes shift continue fi shift UNKNOWN_OPT=no case "$VAR" in accessibility) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_ACCESSIBILITY="$VAL" else UNKNOWN_OPT=yes fi ;; license) LICENSE_FILE="$VAL" ;; gnumake) CFG_USE_GNUMAKE="$VAL" ;; mysql_config) CFG_MYSQL_CONFIG="$VAL" ;; prefix) QT_INSTALL_PREFIX="$VAL" ;; hostprefix) QT_HOST_PREFIX="$VAL" ;; hostdatadir) QT_HOST_DATA="$VAL" ;; hostbindir) QT_HOST_BINS="$VAL" ;; pkg-config) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_PKGCONFIG="$VAL" else UNKNOWN_OPT=yes fi ;; force-pkg-config) CFG_PKGCONFIG="force" ;; docdir) QT_INSTALL_DOCS="$VAL" ;; headerdir) QT_INSTALL_HEADERS="$VAL" ;; plugindir) QT_INSTALL_PLUGINS="$VAL" ;; importdir) QT_INSTALL_IMPORTS="$VAL" ;; qmldir) QT_INSTALL_QML="$VAL" ;; archdatadir) QT_INSTALL_ARCHDATA="$VAL" ;; datadir) QT_INSTALL_DATA="$VAL" ;; libdir) QT_INSTALL_LIBS="$VAL" ;; qtnamespace) QT_NAMESPACE="$VAL" ;; qtlibinfix) QT_LIBINFIX="$VAL" ;; translationdir) QT_INSTALL_TRANSLATIONS="$VAL" ;; sysconfdir|settingsdir) QT_INSTALL_SETTINGS="$VAL" ;; examplesdir) QT_INSTALL_EXAMPLES="$VAL" ;; testsdir) QT_INSTALL_TESTS="$VAL" ;; qconfig) CFG_QCONFIG="$VAL" ;; sysroot) CFG_SYSROOT="$VAL" ;; gcc-sysroot) CFG_GCC_SYSROOT="$VAL" ;; bindir) QT_INSTALL_BINS="$VAL" ;; libexecdir) QT_INSTALL_LIBEXECS="$VAL" ;; sse) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_SSE="$VAL" else UNKNOWN_OPT=yes fi ;; opengl) if [ "$VAL" = "auto" ] || [ "$VAL" = "desktop" ] || [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "es2" ]; then CFG_OPENGL="$VAL" else UNKNOWN_OPT=yes fi ;; openvg) if [ "$VAL" = "auto" ] || [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_OPENVG="$VAL" else UNKNOWN_OPT=yes fi ;; nomake) CFG_NOBUILD_PARTS="$CFG_NOBUILD_PARTS $VAL" ;; make) CFG_BUILD_PARTS="$CFG_BUILD_PARTS $VAL" ;; sdk) if [ "$BUILD_ON_MAC" = "yes" ]; then DeviceVar set QMAKE_MAC_SDK "$VAL" else UNKNOWN_OPT=yes fi ;; arch|host-arch) OPT_OBSOLETE_HOST_ARG=yes ;; harfbuzz) if [ "$BUILD_ON_MAC" = "yes" ] && [ "$VAL" = "yes" ]; then CFG_MAC_HARFBUZZ="$VAL" else UNKNOWN_OPT=yes fi ;; framework) if [ "$BUILD_ON_MAC" = "yes" ]; then CFG_FRAMEWORK="$VAL" else UNKNOWN_OPT=yes fi ;; profile) if [ "$VAL" = "yes" ]; then CFG_PROFILE=yes QMakeVar add QMAKE_CFLAGS -pg QMakeVar add QMAKE_CXXFLAGS -pg QMakeVar add QMAKE_LFLAGS -pg QMAKE_VARS="$QMAKE_VARS CONFIG+=nostrip" else UNKNOWN_OPT=yes fi ;; strip) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_STRIP=$VAL else UNKNOWN_OPT=yes fi ;; testcocoon) if [ "$VAL" = "yes" ]; then QTCONFIG_CONFIG="$QTCONFIG_CONFIG testcocoon" fi ;; platform) PLATFORM="$VAL" # keep compatibility with old platform names case $PLATFORM in aix-64) PLATFORM=aix-xlc-64 ;; hpux-o64) PLATFORM=hpux-acc-o64 ;; hpux-n64) PLATFORM=hpux-acc-64 ;; hpux-acc-n64) PLATFORM=hpux-acc-64 ;; irix-n32) PLATFORM=irix-cc ;; irix-64) PLATFORM=irix-cc-64 ;; irix-cc-n64) PLATFORM=irix-cc-64 ;; reliant-64) PLATFORM=reliant-cds-64 ;; solaris-64) PLATFORM=solaris-cc-64 ;; openunix-cc) PLATFORM=unixware-cc ;; openunix-g++) PLATFORM=unixware-g++ ;; unixware7-cc) PLATFORM=unixware-cc ;; unixware7-g++) PLATFORM=unixware-g++ ;; macx-g++-64) PLATFORM=macx-g++ NATIVE_64_ARCH= case `uname -p` in i386) NATIVE_64_ARCH="x86_64" ;; powerpc) NATIVE_64_ARCH="ppc64" ;; *) echo "WARNING: Can't detect CPU architecture for macx-g++-64" ;; esac if [ ! -z "$NATIVE_64_ARCH" ]; then QTCONFIG_CONFIG="$QTCONFIG_CONFIG $NATIVE_64_ARCH" fi ;; esac ;; xplatform) XPLATFORM="$VAL" case `basename "$XPLATFORM"` in win32-g++*) XPLATFORM_MINGW=yes CFG_RPATH=no CFG_REDUCE_EXPORTS=no ;; esac ;; device) XPLATFORM=`resolveDeviceMkspec $VAL` [ "$XPLATFORM" = "undefined" ] && exit 101 ;; device-option) DEV_VAR=`echo $VAL | sed "s,^\(.*\)=.*,\1,"` DEV_VAL=`echo $VAL | sed "s,^.*=\(.*\),\1,"` DeviceVar set $DEV_VAR $DEV_VAL ;; qpa) QT_QPA_DEFAULT_PLATFORM="$VAL" ;; debug-and-release) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_DEBUG_RELEASE="$VAL" else UNKNOWN_OPT=yes fi ;; optimized-qmake) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_RELEASE_QMAKE="$VAL" else UNKNOWN_OPT=yes fi ;; release) if [ "$VAL" = "yes" ]; then CFG_DEBUG=no elif [ "$VAL" = "no" ]; then CFG_DEBUG=yes else UNKNOWN_OPT=yes fi ;; debug) CFG_DEBUG="$VAL" ;; force-debug-info) CFG_FORCEDEBUGINFO="$VAL" ;; developer-build|commercial|opensource) # These switches have been dealt with already ;; static) if [ "$VAL" = "yes" ]; then CFG_SHARED=no elif [ "$VAL" = "no" ]; then CFG_SHARED=yes else UNKNOWN_OPT=yes fi ;; fatal_error) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_CONFIGURE_EXIT_ON_ERROR="$VAL" else UNKNOWN_OPT=yes fi ;; feature-*) FEATURE=`echo $VAR | sed "s,^[^-]*-\([^-]*\),\1," | tr 'abcdefghijklmnopqrstuvwxyz-' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` if [ "$VAL" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_$FEATURE" elif [ "$VAL" = "yes" ] || [ "$VAL" = "unknown" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_$FEATURE" else UNKNOWN_OPT=yes fi ;; shared) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_SHARED="$VAL" else UNKNOWN_OPT=yes fi ;; gif) if [ "$VAL" = "no" ]; then CFG_GIF="$VAL" else UNKNOWN_OPT=yes fi ;; sm) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_SM="$VAL" else UNKNOWN_OPT=yes fi ;; xinerama) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then CFG_XINERAMA="$VAL" else UNKNOWN_OPT=yes fi ;; xshape) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_XSHAPE="$VAL" else UNKNOWN_OPT=yes fi ;; xvideo) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_XVIDEO="$VAL" else UNKNOWN_OPT=yes fi ;; xsync) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_XSYNC="$VAL" else UNKNOWN_OPT=yes fi ;; xinput2) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_XINPUT2="$VAL" else UNKNOWN_OPT=yes fi ;; xinput) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then CFG_XINPUT="$VAL" else UNKNOWN_OPT=yes fi ;; egl) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_EGL="$VAL" else UNKNOWN_OPT=yes fi ;; pch) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_PRECOMPILE="$VAL" else UNKNOWN_OPT=yes fi ;; separate-debug-info) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_SEPARATE_DEBUG_INFO="$VAL" elif [ "$VAL" = "nocopy" ] ; then CFG_SEPARATE_DEBUG_INFO="yes" CFG_SEPARATE_DEBUG_INFO_NOCOPY="yes" else UNKNOWN_OPT=yes fi ;; reduce-exports) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_REDUCE_EXPORTS="$VAL" else UNKNOWN_OPT=yes fi ;; sse2) if [ "$VAL" = "no" ]; then CFG_SSE2="$VAL" else UNKNOWN_OPT=yes fi ;; sse3) if [ "$VAL" = "no" ]; then CFG_SSE3="$VAL" else UNKNOWN_OPT=yes fi ;; ssse3) if [ "$VAL" = "no" ]; then CFG_SSSE3="$VAL" else UNKNOWN_OPT=yes fi ;; sse4.1) if [ "$VAL" = "no" ]; then CFG_SSE4_1="$VAL" else UNKNOWN_OPT=yes fi ;; sse4.2) if [ "$VAL" = "no" ]; then CFG_SSE4_2="$VAL" else UNKNOWN_OPT=yes fi ;; avx) if [ "$VAL" = "no" ]; then CFG_AVX="$VAL" else UNKNOWN_OPT=yes fi ;; avx2) if [ "$VAL" = "no" ]; then CFG_AVX2="$VAL" else UNKNOWN_OPT=yes fi ;; iwmmxt) CFG_IWMMXT="yes" ;; neon) if [ "$VAL" = "no" ]; then CFG_NEON="$VAL" else UNKNOWN_OPT=yes fi ;; mips_dsp) if [ "$VAL" = "no" ]; then CFG_MIPS_DSP="$VAL" else UNKNOWN_OPT=yes fi ;; mips_dspr2) if [ "$VAL" = "no" ]; then CFG_MIPS_DSPR2="$VAL" else UNKNOWN_OPT=yes fi ;; reduce-relocations) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_REDUCE_RELOCATIONS="$VAL" else UNKNOWN_OPT=yes fi ;; zlib) [ "$VAL" = "qt" ] && VAL=yes if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ]; then CFG_ZLIB="$VAL" else UNKNOWN_OPT=yes fi # No longer supported: #[ "$VAL" = "no" ] && CFG_LIBPNG=no ;; sqlite) if [ "$VAL" = "system" ]; then CFG_SQLITE=system else UNKNOWN_OPT=yes fi ;; libpng) [ "$VAL" = "yes" ] && VAL=qt if [ "$VAL" = "qt" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ]; then CFG_LIBPNG="$VAL" else UNKNOWN_OPT=yes fi ;; libjpeg) [ "$VAL" = "yes" ] && VAL=qt if [ "$VAL" = "qt" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ]; then CFG_LIBJPEG="$VAL" else UNKNOWN_OPT=yes fi ;; xcursor) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then CFG_XCURSOR="$VAL" else UNKNOWN_OPT=yes fi ;; xfixes) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then CFG_XFIXES="$VAL" else UNKNOWN_OPT=yes fi ;; xrandr) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then CFG_XRANDR="$VAL" else UNKNOWN_OPT=yes fi ;; xrender) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_XRENDER="$VAL" else UNKNOWN_OPT=yes fi ;; mitshm) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_MITSHM="$VAL" else UNKNOWN_OPT=yes fi ;; fontconfig) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_FONTCONFIG="$VAL" else UNKNOWN_OPT=yes fi ;; xkb) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_XKB="$VAL" else UNKNOWN_OPT=yes fi ;; xcb) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ] || [ "$VAL" = "qt" ]; then CFG_XCB="$VAL" if [ "$VAL" = "yes" ]; then CFG_XCB="system" fi else UNKNOWN_OPT=yes fi ;; wayland) CFG_OBSOLETE_WAYLAND=yes ;; eglfs) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_EGLFS="$VAL" else UNKNOWN_OPT=yes fi ;; directfb) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_DIRECTFB="$VAL" else UNKNOWN_OPT=yes fi ;; linuxfb) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_LINUXFB="$VAL" else UNKNOWN_OPT=yes fi ;; kms) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_KMS="$VAL" else UNKNOWN_OPT=yes fi ;; libudev) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_LIBUDEV="$VAL" else UNKNOWN_OPT=yes fi ;; evdev) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_EVDEV="$VAL" else UNKNOWN_OPT=yes fi ;; cups) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_CUPS="$VAL" else UNKNOWN_OPT=yes fi ;; iconv) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_ICONV="$VAL" else UNKNOWN_OPT=yes fi ;; glib) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_GLIB="$VAL" else UNKNOWN_OPT=yes fi ;; slog2) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_SLOG2="$VAL" else UNKNOWN_OPT=yes fi ;; gstreamer) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_GSTREAMER="$VAL" else UNKNOWN_OPT=yes fi ;; gtkstyle) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_QGTKSTYLE="$VAL" else UNKNOWN_OPT=yes fi ;; gui) if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ]; then CFG_GUI="yes" else if [ "$VAL" = "no" ]; then CFG_GUI="no" else UNKNOWN_OPT=yes fi fi ;; widgets) if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ]; then CFG_WIDGETS="yes" elif [ "$VAL" = "no" ]; then CFG_WIDGETS="no" else UNKNOWN_OPT=yes fi ;; qpa-platform-guard) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then QPA_PLATFORM_GUARD="$VAL" else UNKNOWN_OPT=yes fi ;; dbus) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "linked" ]; then CFG_DBUS="$VAL" elif [ "$VAL" = "runtime" ]; then CFG_DBUS="yes" else UNKNOWN_OPT=yes fi ;; dbus-linked) if [ "$VAL" = "yes" ]; then CFG_DBUS="linked" else UNKNOWN_OPT=yes fi ;; nis) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_NIS="$VAL" else UNKNOWN_OPT=yes fi ;; largefile) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_LARGEFILE="$VAL" else UNKNOWN_OPT=yes fi ;; openssl) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_OPENSSL="$VAL" else UNKNOWN_OPT=yes fi ;; openssl-linked) if [ "$VAL" = "yes" ]; then CFG_OPENSSL="linked" else UNKNOWN_OPT=yes fi ;; qml-debug) if [ "$VAL" = "yes" ]; then CFG_QML_DEBUG="yes" else if [ "$VAL" = "no" ]; then CFG_QML_DEBUG="no" else UNKNOWN_OPT=yes fi fi ;; javascript-jit) if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ] || [ "$VAL" = "no" ]; then CFG_JAVASCRIPTCORE_JIT="$VAL" else UNKNOWN_OPT=yes fi ;; confirm-license) if [ "$VAL" = "yes" ]; then OPT_CONFIRM_LICENSE="$VAL" else UNKNOWN_OPT=yes fi ;; h|help) if [ "$VAL" = "yes" ]; then OPT_HELP="$VAL" else UNKNOWN_OPT=yes fi ;; sql-*|imageformat-*) # if Qt style options were used, $VAL can be "no", "qt", or "plugin" # if autoconf style options were used, $VAL can be "yes" or "no" [ "$VAL" = "yes" ] && VAL=qt # now $VAL should be "no", "qt", or "plugin"... double-check if [ "$VAL" != "no" ] && [ "$VAL" != "qt" ] && [ "$VAL" != "plugin" ]; then UNKNOWN_OPT=yes fi # now $VAL is "no", "qt", or "plugin" OPT="$VAL" VAL=`echo $VAR | sed "s,^[^-]*-\([^-]*\).*,\1,"` VAR=`echo $VAR | sed "s,^\([^-]*\).*,\1,"` # Grab the available values case "$VAR" in sql) avail="$CFG_SQL_AVAILABLE" ;; imageformat) avail="$CFG_IMAGEFORMAT_PLUGIN_AVAILABLE" if [ "$OPT" != "plugin" ]; then # png is always built in avail="$avail png" fi ;; *) avail="" echo "BUG: Unhandled type $VAR used in $CURRENT_OPT" ;; esac # Check that that user's value is available. found=no for d in $avail; do if [ "$VAL" = "$d" ]; then found=yes break fi done [ "$found" = yes ] || ERROR=yes if [ "$VAR" = "sql" ]; then # set the CFG_SQL_driver eval "CFG_SQL_$VAL=\$OPT" continue elif [ "$VAR" = "imageformat" ]; then [ "$OPT" = "qt" ] && OPT=yes VAL="`echo $VAL |tr a-z A-Z`" eval "CFG_$VAL=$OPT" continue fi if [ "$OPT" = "plugin" ] || [ "$OPT" = "qt" ]; then if [ "$OPT" = "plugin" ]; then VAR="${VAR}-${OPT}" fi QMakeVar add "${VAR}s" "${VAL}" elif [ "$OPT" = "no" ]; then PLUG_VAR="${VAR}-plugin" IN_VAR="${VAR}" QMakeVar del "${IN_VAR}s" "$VAL" QMakeVar del "${PLUG_VAR}s" "$VAL" fi if [ "$ERROR" = "yes" ]; then echo "$CURRENT_OPT: unknown argument" OPT_HELP=yes fi ;; v|verbose) if [ "$VAL" = "yes" ]; then if [ "$OPT_VERBOSE" = "$VAL" ]; then # takes two verboses to turn on qmake debugs QMAKE_SWITCHES="$QMAKE_SWITCHES -d" else OPT_VERBOSE=yes fi elif [ "$VAL" = "no" ]; then if [ "$OPT_VERBOSE" = "$VAL" ] && echo "$QMAKE_SWITCHES" | grep ' -d' >/dev/null 2>&1; then QMAKE_SWITCHES=`echo $QMAKE_SWITCHES | sed "s, -d,,"` else OPT_VERBOSE=no fi else UNKNOWN_OPT=yes fi ;; rpath) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_RPATH="$VAL" else UNKNOWN_OPT=yes fi ;; add_define) DEFINES="$DEFINES \"$VAL\"" D_FLAGS="$D_FLAGS -D\"$VAL\"" ;; add_ipath) I_FLAGS="$I_FLAGS -I\"${VAL}\"" ;; add_lpath) L_FLAGS="$L_FLAGS -L\"${VAL}\"" ;; add_rpath) RPATH_FLAGS="$RPATH_FLAGS \"${VAL}\"" ;; add_link) L_FLAGS="$L_FLAGS -l\"${VAL}\"" ;; add_fpath) if [ "$BUILD_ON_MAC" = "yes" ]; then L_FLAGS="$L_FLAGS -F\"${VAL}\"" I_FLAGS="$I_FLAGS -F\"${VAL}\"" else UNKNOWN_OPT=yes fi ;; add_framework) if [ "$BUILD_ON_MAC" = "yes" ]; then L_FLAGS="$L_FLAGS -framework \"${VAL}\"" else UNKNOWN_OPT=yes fi ;; add_warn) W_FLAGS="$W_FLAGS \"${VAL}\"" ;; silent) CFG_SILENT="$VAL" ;; dont-process) CFG_PROCESS=no ;; process) CFG_PROCESS=partial ;; fully-process) CFG_PROCESS=full ;; audio-backend) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_AUDIO_BACKEND="$VAL" else UNKNOWN_OPT=yes fi ;; icu) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_ICU="$VAL" else UNKNOWN_OPT=yes fi ;; force-asserts) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_FORCE_ASSERTS="$VAL" else UNKNOWN_OPT=yes fi ;; pcre) if [ "$VAL" = "qt" ] || [ "$VAL" = "system" ]; then CFG_PCRE="$VAL" else UNKNOWN_OPT=yes fi ;; c++11) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_CXX11="$VAL" else UNKNOWN_OPT=yes fi ;; system-proxies) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_SYSTEM_PROXIES="$VAL" else UNKNOWN_OPT=yes fi ;; directwrite) if [ "$XPLATFORM_MINGW" = "yes" ] ; then if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then CFG_DIRECTWRITE="$VAL" else UNKNOWN_OPT=yes fi else UNKNOWN_OPT=yes fi ;; *) UNKNOWN_OPT=yes ;; esac if [ "$UNKNOWN_OPT" = "yes" ]; then echo "${CURRENT_OPT}: invalid command-line switch" OPT_HELP=yes ERROR=yes fi done # update QT_CONFIG to show our current predefined configuration case "$CFG_QCONFIG" in minimal|small|medium|large|full) # these are a sequence of increasing functionality for c in minimal small medium large full; do QT_CONFIG="$QT_CONFIG $c-config" [ "$CFG_QCONFIG" = $c ] && break done ;; *) # not known to be sufficient for anything if [ '!' -f "$relpath/src/corelib/global/qconfig-${CFG_QCONFIG}.h" ] && [ '!' -f `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"` ]; then echo >&2 "Error: configuration file not found:" echo >&2 " $relpath/src/corelib/global/qconfig-${CFG_QCONFIG}.h" echo >&2 " or" echo >&2 " `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"`" OPT_HELP=yes fi esac #------------------------------------------------------------------------------- # build tree initialization #------------------------------------------------------------------------------- # where to find which.. unixtests="$relpath/config.tests/unix" mactests="$relpath/config.tests/mac" WHICH="$unixtests/which.test" PERL=`$WHICH perl 2>/dev/null` # find out which awk we want to use, prefer gawk, then nawk, then regular awk AWK= for e in gawk nawk awk; do if "$WHICH" $e >/dev/null 2>&1 && ( $e -f /dev/null /dev/null ) >/dev/null 2>&1; then AWK=$e break fi done # find perl PERL="/usr/bin/perl" if "$WHICH" perl >/dev/null 2>&1 && ( perl /dev/null ) >/dev/null 2>&1; then PERL=`$WHICH perl` fi ### skip this if the user just needs help... if [ "$OPT_HELP" != "yes" ]; then # is this a shadow build? if [ "$OPT_SHADOW" = "maybe" ]; then OPT_SHADOW=no if [ "$relpath" != "$outpath" ] && [ '!' -f "$outpath/configure" ]; then if [ -h "$outpath" ]; then [ "$relpath" -ef "$outpath" ] || OPT_SHADOW=yes else OPT_SHADOW=yes fi fi fi if [ "$OPT_SHADOW" = "yes" ]; then if [ -f "$relpath/.qmake.cache" -o -f "$relpath/src/corelib/global/qconfig.h" -o -f "$relpath/src/corelib/global/qconfig.cpp" ]; then echo >&2 "You cannot make a shadow build from a source tree containing a previous build." echo >&2 "Cannot proceed." exit 1 fi [ "$OPT_VERBOSE" = "yes" ] && echo "Performing shadow build..." fi if [ "$PLATFORM_MAC" = "no" -a "$CFG_DEBUG_RELEASE" = "yes" ]; then echo echo "WARNING: -debug-and-release is not supported outside of Mac OS X." echo "Qt can be built in release mode with separate debug information, so" echo "-debug-and-release is not necessary anymore" echo fi if [ "$CFG_SILENT" = "yes" ]; then QMAKE_CONFIG="$QMAKE_CONFIG silent" fi # if the source tree is different from the build tree, # symlink or copy part of the sources if [ "$OPT_SHADOW" = "yes" ]; then echo "Preparing build tree..." if [ -z "$PERL" ]; then echo echo "You need perl in your PATH to make a shadow build." echo "Cannot proceed." exit 1 fi [ -d "$outpath/bin" ] || mkdir -p "$outpath/bin" # make a syncqt script that can be used in the shadow rm -f "$outpath/bin/syncqt" if [ -x "$relpath/bin/syncqt" ]; then mkdir -p "$outpath/bin" echo "#!/bin/sh" >"$outpath/bin/syncqt" echo "perl \"$relpath/bin/syncqt\" -mkspecsdir \"$outpath/mkspecs\" \"\$@\"" >>"$outpath/bin/syncqt" chmod 755 "$outpath/bin/syncqt" fi for i in elf2e32_qtwrapper createpackage patch_capabilities qtmodule-configtests; do rm -f "$outpath/bin/$i" if [ -x "$relpath/bin/$i" ]; then mkdir -p "$outpath/bin" echo "#!/bin/sh" >"$outpath/bin/$i" echo "QTDIR=\"$relpath\"; export QTDIR" >>"$outpath/bin/$i" echo "\"$relpath/bin/$i\" \"\$@\"" >>"$outpath/bin/$i" chmod 755 "$outpath/bin/$i" fi done # save a pre-existing mkspecs/modules dir test -d "$outpath/mkspecs/modules" && \ mv "$outpath/mkspecs/modules" "$outpath/mkspecs-modules" # ditto for mkspecs/modules-inst test -d "$outpath/mkspecs/modules-inst" && \ mv "$outpath/mkspecs/modules-inst" "$outpath/mkspecs-modules-inst" # symlink the mkspecs directory mkdir -p "$outpath/mkspecs" rm -rf "$outpath"/mkspecs/* ln -s "$relpath"/mkspecs/* "$outpath/mkspecs" ShadowMkspecs() { rm -rf "$outpath/mkspecs/$1" find "$relpath/mkspecs/$1" -type d | sed "s,^$relpath,$outpath," | xargs mkdir -p find "$relpath/mkspecs/$1" -type f | sed "s,^$relpath/,," | while read f; do ln -s "$relpath/$f" "$outpath/$f"; done } # Special case for mkspecs/features directory. # To be able to place .prf files into a shadow build directory, # we're creating links for files only. The directory structure is reproduced. ShadowMkspecs features # The modules dir is special, too. if test -d "$outpath/mkspecs-modules"; then rm -rf "$outpath/mkspecs/modules" mv "$outpath/mkspecs-modules" "$outpath/mkspecs/modules" else ShadowMkspecs modules fi # The modules-inst dir is not quite as special, but still. if test -d "$outpath/mkspecs-modules-inst"; then rm -rf "$outpath/mkspecs/modules-inst" mv "$outpath/mkspecs-modules-inst" "$outpath/mkspecs/modules-inst" fi # Prepare doc directory mkdir -p "$outpath/doc" ln -f -s "$relpath"/doc/global "$outpath/doc" fi # symlink fonts to be able to run application from build directory if [ ! -d "${outpath}/lib/fonts" ]; then if [ "$PLATFORM" = "$XPLATFORM" ]; then mkdir -p "${outpath}/lib" ln -s "${relpath}/lib/fonts" "${outpath}/lib/fonts" fi fi # find a make command if [ -z "$MAKE" ]; then MAKE= for mk in gmake make; do if "$WHICH" $mk >/dev/null 2>&1; then MAKE=`"$WHICH" $mk` break fi done if [ -z "$MAKE" ]; then echo >&2 "You don't seem to have 'make' or 'gmake' in your PATH." echo >&2 "Cannot proceed." exit 1 fi # export MAKE, we need it later in the config.tests export MAKE fi fi ### help #------------------------------------------------------------------------------- # auto-detect all that hasn't been specified in the arguments #------------------------------------------------------------------------------- if [ -z "$PLATFORM" ]; then PLATFORM_NOTES= case "$UNAME_SYSTEM:$UNAME_RELEASE" in Darwin:*) OSX_VERSION=`uname -r | cut -d. -f1` # Select compiler. Use g++ unless we find a usable Clang version PLATFORM=macx-g++ if [ "$OSX_VERSION" -ge 12 ]; then # We're on Mountain Lion or above. Use Clang. Don't advertise gcc. PLATFORM=macx-clang elif [ "$OSX_VERSION" -eq 11 ]; then # We're on Lion. Check if we have a supported Clang version if [ "$(clang -v 2>&1 | grep -Po '(?<=version )[\d]')" -ge 3 ]; then PLATFORM=macx-clang PLATFORM_NOTES="\n - Also available for Mac OS X: macx-g++\n" fi fi ;; AIX:*) #PLATFORM=aix-g++ #PLATFORM=aix-g++-64 PLATFORM=aix-xlc #PLATFORM=aix-xlc-64 PLATFORM_NOTES=" - Also available for AIX: aix-g++ aix-g++-64 aix-xlc-64 " ;; GNU:*) PLATFORM=hurd-g++ ;; dgux:*) PLATFORM=dgux-g++ ;; # DYNIX/ptx:4*) # PLATFORM=dynix-g++ # ;; ULTRIX:*) PLATFORM=ultrix-g++ ;; FreeBSD:*) PLATFORM=freebsd-g++ PLATFORM_NOTES=" - Also available for FreeBSD: freebsd-icc " ;; OpenBSD:*) PLATFORM=openbsd-g++ ;; NetBSD:*) PLATFORM=netbsd-g++ ;; BSD/OS:*|BSD/386:*) PLATFORM=bsdi-g++ ;; IRIX*:*) #PLATFORM=irix-g++ PLATFORM=irix-cc #PLATFORM=irix-cc-64 PLATFORM_NOTES=" - Also available for IRIX: irix-g++ irix-cc-64 " ;; HP-UX:*) case "$UNAME_MACHINE" in ia64) #PLATFORM=hpuxi-acc-32 PLATFORM=hpuxi-acc-64 PLATFORM_NOTES=" - Also available for HP-UXi: hpuxi-acc-32 " ;; *) #PLATFORM=hpux-g++ PLATFORM=hpux-acc #PLATFORM=hpux-acc-64 #PLATFORM=hpux-cc #PLATFORM=hpux-acc-o64 PLATFORM_NOTES=" - Also available for HP-UX: hpux-g++ hpux-acc-64 hpux-acc-o64 " ;; esac ;; OSF1:*) #PLATFORM=tru64-g++ PLATFORM=tru64-cxx PLATFORM_NOTES=" - Also available for Tru64: tru64-g++ " ;; Linux:*) case "$UNAME_MACHINE" in x86_64|s390x|ppc64) PLATFORM=linux-g++-64 ;; *) PLATFORM=linux-g++ ;; esac PLATFORM_NOTES=" - Also available for Linux: linux-kcc linux-icc linux-cxx " ;; SunOS:5*) if [ "$XPLATFORM_MINGW" = "yes" ]; then PLATFORM="solaris-g++" else #PLATFORM=solaris-g++ PLATFORM=solaris-cc #PLATFORM=solaris-cc64 fi PLATFORM_NOTES=" - Also available for Solaris: solaris-g++ solaris-cc-64 " ;; ReliantUNIX-*:*|SINIX-*:*) PLATFORM=reliant-cds #PLATFORM=reliant-cds-64 PLATFORM_NOTES=" - Also available for Reliant UNIX: reliant-cds-64 " ;; CYGWIN*:*) PLATFORM=cygwin-g++ ;; LynxOS*:*) PLATFORM=lynxos-g++ ;; OpenUNIX:*) #PLATFORM=unixware-g++ PLATFORM=unixware-cc PLATFORM_NOTES=" - Also available for OpenUNIX: unixware-g++ " ;; UnixWare:*) #PLATFORM=unixware-g++ PLATFORM=unixware-cc PLATFORM_NOTES=" - Also available for UnixWare: unixware-g++ " ;; SCO_SV:*) #PLATFORM=sco-g++ PLATFORM=sco-cc PLATFORM_NOTES=" - Also available for SCO OpenServer: sco-g++ " ;; UNIX_SV:*) PLATFORM=unixware-g++ ;; QNX:*) PLATFORM=unsupported/qnx-g++ ;; *) if [ "$OPT_HELP" != "yes" ]; then echo >&2 echo " The build script does not currently recognize all" >&2 echo " platforms supported by Qt." >&2 echo " Rerun this script with a -platform option listed to" >&2 echo " set the system/compiler combination you use." >&2 echo >&2 exit 2 fi esac fi [ -z "$XPLATFORM" ] && XPLATFORM="$PLATFORM" case `basename "$XPLATFORM"` in win32-g++*) XPLATFORM_MINGW=yes;; esac case "$XPLATFORM" in *-maemo*) XPLATFORM_MAEMO=yes;; esac case "$XPLATFORM" in *qnx-*|*blackberry-*) XPLATFORM_QNX=yes;; esac if [ -d "$PLATFORM" ]; then QMAKESPEC="$PLATFORM" else QMAKESPEC="$relpath/mkspecs/${PLATFORM}" fi if [ -d "$XPLATFORM" ]; then XQMAKESPEC="$XPLATFORM" else XQMAKESPEC="$relpath/mkspecs/${XPLATFORM}" fi if [ "$PLATFORM" != "$XPLATFORM" ]; then QT_CROSS_COMPILE=yes QMAKE_CONFIG="$QMAKE_CONFIG cross_compile" QTCONFIG_CONFIG="$QTCONFIG_CONFIG cross_compile" fi if [ "$BUILD_ON_MAC" = "yes" ]; then if [ `basename $QMAKESPEC` = "macx-xcode" ] || [ `basename $XQMAKESPEC` = "macx-xcode" ]; then echo >&2 echo " Platform 'macx-xcode' should not be used when building Qt/Mac." >&2 echo " Please build Qt/Mac with 'macx-g++', then if you would like to" >&2 echo " use mac-xcode on your application code it can link to a Qt/Mac" >&2 echo " built with 'macx-g++'" >&2 echo >&2 exit 2 fi fi # check specified platforms are supported if [ '!' -d "$QMAKESPEC" ]; then echo echo " The specified system/compiler is not supported:" echo echo " $QMAKESPEC" echo echo " Please see the README file for a complete list." echo exit 2 fi if [ '!' -d "$XQMAKESPEC" ]; then echo echo " The specified system/compiler is not supported:" echo echo " $XQMAKESPEC" echo echo " Please see the README file for a complete list." echo exit 2 fi if [ '!' -f "${XQMAKESPEC}/qplatformdefs.h" ]; then echo echo " The specified system/compiler port is not complete:" echo echo " $XQMAKESPEC/qplatformdefs.h" echo echo " Please use the contact form at http://qt.digia.com/contact-us" echo exit 2 fi if [ "$UNAME_SYSTEM" = "SunOS" ]; then # Solaris 2.5 and 2.6 have libposix4, which was renamed to librt for Solaris 7 and up if echo $UNAME_RELEASE | grep "^5\.[5|6]" >/dev/null 2>&1; then sed -e "s,-lrt,-lposix4," "$XQMAKESPEC/qmake.conf" > "$XQMAKESPEC/qmake.conf.new" mv "$XQMAKESPEC/qmake.conf.new" "$XQMAKESPEC/qmake.conf" fi fi if [ "$CFG_RTOS_ENABLED" = "no" ]; then case `basename "$XPLATFORM"` in qnx-* | vxworks-*) echo "" echo "You are not licensed for Qt for `basename $XPLATFORM`." echo "" echo "Please use the contact form at http://qt.digia.com/contact-us" echo "to upgrade your license to include this platform, or install" echo "the Qt Open Source Edition if you intend to develop free software." exit 1 ;; esac fi #------------------------------------------------------------------------------- # tests that don't need qmake (must be run before displaying help) #------------------------------------------------------------------------------- # detect build style if [ "$CFG_DEBUG" = "auto" ]; then if [ "$PLATFORM_MAC" = "yes" -o "$XPLATFORM_MINGW" = "yes" ]; then CFG_DEBUG_RELEASE=yes CFG_DEBUG=yes elif [ "$CFG_DEV" = "yes" ]; then CFG_DEBUG_RELEASE=no CFG_DEBUG=yes else CFG_DEBUG_RELEASE=no CFG_DEBUG=no fi fi if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then QT_CONFIG="$QT_CONFIG build_all debug_and_release" fi if [ "$CFG_FORCEDEBUGINFO" = "yes" ]; then QT_CONFIG="$QT_CONFIG force_debug_info" fi # disable GTK style support auto-detection on Mac if [ "$BUILD_ON_MAC" = "yes" ] && [ "$CFG_QGTKSTYLE" = "auto" ]; then CFG_QGTKSTYLE=no fi QMAKE_CONF_COMPILER=`getXQMakeConf QMAKE_CXX` TEST_COMPILER=$QMAKE_CONF_COMPILER if [ "$XPLATFORM_SYMBIAN_SBSV2" = "no" ]; then if [ -z "$TEST_COMPILER" ]; then echo "ERROR: Cannot set the compiler for the configuration tests" exit 1 fi fi TEST_COMPILER_CXXFLAGS=`getXQMakeConf QMAKE_CXXFLAGS` GCC_MACHINE_DUMP= case "$TEST_COMPILER" in *g++) GCC_MACHINE_DUMP=$($TEST_COMPILER -dumpmachine);; esac if [ -n "$GCC_MACHINE_DUMP" ]; then DeviceVar set GCC_MACHINE_DUMP $($TEST_COMPILER -dumpmachine) fi if [ -n "$CFG_SYSROOT" ] && [ "$CFG_GCC_SYSROOT" = "yes" ]; then SYSROOT_FLAG="--sysroot=$CFG_SYSROOT" else SYSROOT_FLAG= fi export SYSROOT_FLAG # used by config.tests/unix/{compile.test,arch.test} # auto-detect precompiled header support if [ "$CFG_PRECOMPILE" = "auto" ]; then if "$unixtests/precomp.test" "$TEST_COMPILER" "$OPT_VERBOSE"; then CFG_PRECOMPILE=no else CFG_PRECOMPILE=yes fi fi # auto-detect support for separate debug info in objcopy if [ "$CFG_SEPARATE_DEBUG_INFO" != "no" ] && [ "$CFG_SHARED" = "yes" ]; then TEST_OBJCOPY=`getXQMakeConf QMAKE_OBJCOPY` COMPILER_WITH_FLAGS="$TEST_COMPILER $TEST_COMPILER_CXXFLAGS" if "$unixtests/objcopy.test" "$COMPILER_WITH_FLAGS" "$TEST_OBJCOPY" "$OPT_VERBOSE"; then CFG_SEPARATE_DEBUG_INFO=no else case "$PLATFORM" in hpux-*) # binutils on HP-UX is buggy; default to no. CFG_SEPARATE_DEBUG_INFO=no ;; *) CFG_SEPARATE_DEBUG_INFO=yes ;; esac fi fi # auto-detect -fvisibility support if [ "$CFG_REDUCE_EXPORTS" != "no" ]; then if "$unixtests/fvisibility.test" "$TEST_COMPILER" "$OPT_VERBOSE"; then if [ "$CFG_REDUCE_EXPORTS" = "yes" ]; then echo "-reduce-exports was requested but this compiler does not support it" echo "Re-run configure with -v for more information" exit 1 fi CFG_REDUCE_EXPORTS=no else CFG_REDUCE_EXPORTS=yes fi fi # auto-detect -fstack-protector-strong support (for QNX only currently) if [ "$XPLATFORM_QNX" = "yes" ]; then if compilerSupportsFlag $TEST_COMPILER -fstack-protector-strong; then CFG_STACK_PROTECTOR_STRONG=yes else CFG_STACK_PROTECTOR_STRONG=no fi else CFG_STACK_PROTECTOR_STRONG=no fi # detect the availability of the -Bsymbolic-functions linker optimization if [ "$CFG_REDUCE_RELOCATIONS" != "no" ]; then if "$unixtests/bsymbolic_functions.test" "$TEST_COMPILER" "$OPT_VERBOSE"; then if [ "$CFG_REDUCE_RELOCATIONS" = "yes" ]; then echo "-reduce-relocations was requested but this compiler does not support it" echo "Re-run configure with -v for more information" exit 1 fi CFG_REDUCE_RELOCATIONS=no else CFG_REDUCE_RELOCATIONS=yes fi fi # auto-detect GNU make support if [ "$CFG_USE_GNUMAKE" = "auto" ] && "$MAKE" -v | grep "GNU Make" >/dev/null 2>&1; then CFG_USE_GNUMAKE=yes fi # find the default framework value if [ "$BUILD_ON_MAC" = "yes" ]; then if [ "$CFG_FRAMEWORK" = "auto" ]; then CFG_FRAMEWORK="$CFG_SHARED" elif [ "$CFG_FRAMEWORK" = "yes" ] && [ "$CFG_SHARED" = "no" ]; then echo echo "WARNING: Using static linking will disable the use of Mac frameworks." echo CFG_FRAMEWORK="no" fi else CFG_FRAMEWORK=no fi # auto-detect default include and library search paths gccout=`$TEST_COMPILER $SYSROOT_FLAG $TEST_COMPILER_CXXFLAGS -xc++ -E -v - < /dev/null 2>&1 > /dev/null` libdirs=`echo "$gccout" | sed -n -e 's/^LIBRARY_PATH=\(.*\)/\1/p'` DEFAULT_LIBDIRS=`IFS=:; for i in $libdirs; do test -d "$i" && cd "$i" && pwd; done | sort -u` DEFAULT_INCDIRS=`echo "$gccout" | awk ' /^End of search/ { yup=0 } / \(framework directory\)$/ { next } yup { print substr($0, 2) } /^\#include /dev/null 2>&1; then # echo # echo "WARNING: libs is a required part of the build." # echo CFG_BUILD_PARTS="$CFG_BUILD_PARTS libs" fi #------------------------------------------------------------------------------- # post process QT_INSTALL_* variables #------------------------------------------------------------------------------- if [ -z "$QT_INSTALL_PREFIX" ]; then if [ "$CFG_DEV" = "yes" ]; then QT_INSTALL_PREFIX="$outpath" # In Development, we use sandboxed builds by default else QT_INSTALL_PREFIX="/usr/local/Qt-${QT_VERSION}" # the default install prefix is /usr/local/Qt-$QT_VERSION fi fi QT_INSTALL_PREFIX=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_PREFIX"` if [ -z "$QT_INSTALL_HEADERS" ]; then #default QT_INSTALL_HEADERS="$QT_INSTALL_PREFIX/include" fi QT_INSTALL_HEADERS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_HEADERS"` if [ -z "$QT_INSTALL_LIBS" ]; then #default QT_INSTALL_LIBS="$QT_INSTALL_PREFIX/lib" #fallback fi QT_INSTALL_LIBS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_LIBS"` if [ -z "$QT_INSTALL_ARCHDATA" ]; then #default QT_INSTALL_ARCHDATA="$QT_INSTALL_PREFIX" #fallback fi QT_INSTALL_ARCHDATA=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_ARCHDATA"` if [ -z "$QT_INSTALL_DATA" ]; then #default QT_INSTALL_DATA="$QT_INSTALL_PREFIX" #fallback fi QT_INSTALL_DATA=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_DATA"` if [ -z "$QT_INSTALL_BINS" ]; then #default QT_INSTALL_BINS="$QT_INSTALL_PREFIX/bin" #fallback fi QT_INSTALL_BINS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_BINS"` if [ "$XPLATFORM_MINGW" = "yes" ]; then QT_INSTALL_LIBEXECS_DIRNAME="lib" else QT_INSTALL_LIBEXECS_DIRNAME="libexec" fi if [ -z "$QT_INSTALL_LIBEXECS" ]; then #default QT_INSTALL_LIBEXECS="$QT_INSTALL_ARCHDATA/$$QT_INSTALL_LIBEXECS_DIRNAME" #fallback fi QT_INSTALL_LIBEXECS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_LIBEXECS"` if [ -z "$QT_INSTALL_DOCS" ]; then #default QT_INSTALL_DOCS="$QT_INSTALL_DATA/doc" #fallback fi QT_INSTALL_DOCS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_DOCS"` if [ -z "$QT_INSTALL_PLUGINS" ]; then #default QT_INSTALL_PLUGINS="$QT_INSTALL_ARCHDATA/plugins" #fallback fi QT_INSTALL_PLUGINS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_PLUGINS"` if [ -z "$QT_INSTALL_IMPORTS" ]; then #default QT_INSTALL_IMPORTS="$QT_INSTALL_ARCHDATA/imports" #fallback fi QT_INSTALL_IMPORTS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_IMPORTS"` #qml if [ -z "$QT_INSTALL_QML" ]; then #default QT_INSTALL_QML="$QT_INSTALL_ARCHDATA/qml" #fallback fi QT_INSTALL_QML=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_QML"` if [ -z "$QT_INSTALL_TRANSLATIONS" ]; then #default QT_INSTALL_TRANSLATIONS="$QT_INSTALL_DATA/translations" #fallback fi QT_INSTALL_TRANSLATIONS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_TRANSLATIONS"` if [ -z "$QT_INSTALL_SETTINGS" ]; then #default if [ "$BUILD_ON_MAC" = "yes" ]; then QT_INSTALL_SETTINGS=/Library/Preferences/Qt else QT_INSTALL_SETTINGS=$QT_INSTALL_PREFIX/etc/xdg fi fi QT_INSTALL_SETTINGS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_SETTINGS"` if [ -z "$QT_INSTALL_EXAMPLES" ]; then #default QT_INSTALL_EXAMPLES="$QT_INSTALL_PREFIX/examples" #fallback fi QT_INSTALL_EXAMPLES=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_EXAMPLES"` #tests if [ -z "$QT_INSTALL_TESTS" ]; then #default QT_INSTALL_TESTS="$QT_INSTALL_PREFIX/tests" #fallback fi QT_INSTALL_TESTS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_TESTS"` #------- host paths -------- if [ -z "$QT_HOST_PREFIX" ]; then QT_HOST_PREFIX=$QT_INSTALL_PREFIX haveHpx=false else QT_HOST_PREFIX=`"$relpath/config.tests/unix/makeabs" "$QT_HOST_PREFIX"` haveHpx=true fi if [ -z "$QT_HOST_BINS" ]; then #default if $haveHpx; then QT_HOST_BINS="$QT_HOST_PREFIX/bin" #fallback else QT_HOST_BINS="$QT_INSTALL_BINS" fi fi QT_HOST_BINS=`"$relpath/config.tests/unix/makeabs" "$QT_HOST_BINS"` if [ -z "$QT_HOST_DATA" ]; then #default if $haveHpx; then QT_HOST_DATA="$QT_HOST_PREFIX" else QT_HOST_DATA="$QT_INSTALL_ARCHDATA" fi else QT_HOST_DATA=`"$relpath/config.tests/unix/makeabs" "$QT_HOST_DATA"` fi #------------------------------------------------------------------------------- # help - interactive parts of the script _after_ this section please #------------------------------------------------------------------------------- # next, emit a usage message if something failed. if [ "$OPT_HELP" = "yes" ]; then [ "x$ERROR" = "xyes" ] && echo if [ "$CFG_NIS" = "no" ]; then NSY=" " NSN="*" else NSY="*" NSN=" " fi if [ "$CFG_CUPS" = "no" ]; then CUY=" " CUN="*" else CUY="*" CUN=" " fi if [ "$CFG_ICONV" = "no" ]; then CIY=" " CIN="*" else CIY="*" CIN=" " fi if [ "$CFG_LARGEFILE" = "no" ]; then LFSY=" " LFSN="*" else LFSY="*" LFSN=" " fi if [ "$CFG_PRECOMPILE" = "auto" ] || [ "$CFG_PRECOMPILE" = "no" ]; then PHY=" " PHN="*" else PHY="*" PHN=" " fi if [ "$CFG_XCB" = "no" ]; then XCBY=" " XCBN="*" else XCBY="*" XCBN=" " fi if [ "$CFG_EGLFS" = "no" ]; then EGLFSY=" " EGLFSN="*" else EGLFSY="*" EGLFSN=" " fi if [ "$CFG_DIRECTFB" = "no" ]; then DFBY=" " DFBN="*" else DFBY="*" DFBN=" " fi if [ "$CFG_LINUXFB" = "no" ]; then LFBY=" " LFBN="*" else LFBY="*" LFBN=" " fi if [ "$CFG_KMS" = "no" ]; then KMSY=" " KMSN="*" else KMSY="*" KMSN=" " fi if [ "$CFG_XINPUT2" = "no" ]; then X2Y=" " X2N="*" else X2Y="*" X2N=" " fi if [ "$CFG_DBUS" = "no" ]; then DBY=" " DBN="+" else DBY="+" DBN=" " fi if [ "$CFG_SEPARATE_DEBUG_INFO" = "no" ]; then SBY=" " SBN="*" else SBY="*" SBN=" " fi if [ "$CFG_GLIB" = "no" ]; then GBY=" " GBN="+" else GBY="+" GBN=" " fi cat < ...... This will install everything relative to (default $QT_INSTALL_PREFIX) -hostprefix [dir] .. Tools and libraries needed when developing applications are installed in [dir]. If [dir] is not given, the current build directory will be used. (default PREFIX) You may use these to separate different parts of the install: -bindir ......... User executables will be installed to (default PREFIX/bin) -headerdir ...... Headers will be installed to (default PREFIX/include) -libdir ......... Libraries will be installed to (default PREFIX/lib) -archdatadir ..... Arch-dependent data used by Qt will be installed to (default PREFIX) -plugindir ...... Plugins will be installed to (default ARCHDATADIR/plugins) -libexecdir ..... Program executables will be installed to (default ARCHDATADIR/$QT_INSTALL_LIBEXECS_DIRNAME) -importdir ...... Imports for QML1 will be installed to (default ARCHDATADIR/imports) -qmldir ......... Imports for QML2 will be installed to (default ARCHDATADIR/qml) -datadir ........ Arch-independent data used by Qt will be installed to (default PREFIX) -docdir ......... Documentation will be installed to (default DATADIR/doc) -translationdir . Translations of Qt programs will be installed to (default DATADIR/translations) -sysconfdir ..... Settings used by Qt programs will be looked for in (default PREFIX/etc/xdg) -examplesdir .... Examples will be installed to (default PREFIX/examples) -testsdir ....... Tests will be installed to (default PREFIX/tests) -hostbindir .. Host executables will be installed to (default HOSTPREFIX/bin) -hostdatadir . Data used by qmake will be installed to (default HOSTPREFIX) Configure options: The defaults (*) are usually acceptable. A plus (+) denotes a default value that needs to be evaluated. If the evaluation succeeds, the feature is included. Here is a short explanation of each option: * -release ........... Compile and link Qt with debugging turned off. -debug ............. Compile and link Qt with debugging turned on. -debug-and-release . Compile and link two versions of Qt, with and without debugging turned on (Mac only). -force-debug-info .. Create symbol files for release builds. -developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting) -opensource ........ Compile and link the Open-Source Edition of Qt. -commercial ........ Compile and link the Commercial Edition of Qt. -no-c++11 .......... Do not compile Qt with C++11 support enabled. + -c++11 ............. Compile Qt with C++11 support enabled. * -shared ............ Create and use shared Qt libraries. -static ............ Create and use static Qt libraries. * -process ........... Generate only a top-level Makefile. -fully-process ..... Generate Makefiles for the entire Qt tree. -dont-process ...... Do not generate any Makefiles. -no-largefile ...... Disables large file support. + -largefile ......... Enables Qt to access files larger than 4 GB. -no-accessibility .. Do not compile Accessibility support. Disabling accessibility is not recommended, as it will break QStyle and may break other internal parts of Qt. With this switch you create a source incompatible version of Qt, which is unsupported. + -accessibility ..... Compile Accessibility support. -no-sql- ... Disable SQL entirely. -qt-sql- ... Enable a SQL in the Qt SQL module, by default none are turned on. -plugin-sql- Enable SQL as a plugin to be linked to at run time. Possible values for : [ $CFG_SQL_AVAILABLE ] -system-sqlite ..... Use sqlite from the operating system. -no-javascript-jit . Do not build the JavaScriptCore JIT compiler. + -javascript-jit .... Build the JavaScriptCore JIT compiler. -no-qml-debug ...... Do not build the in-process QML debugging support. + -qml-debug ......... Build the QML debugging support. -platform target ... The operating system and compiler you are building on ($PLATFORM). See the README file for a list of supported operating systems and compilers. -no-sse2 ........... Do not compile with use of SSE2 instructions. -no-sse3 ........... Do not compile with use of SSE3 instructions. -no-ssse3 .......... Do not compile with use of SSSE3 instructions. -no-sse4.1.......... Do not compile with use of SSE4.1 instructions. -no-sse4.2.......... Do not compile with use of SSE4.2 instructions. -no-avx ............ Do not compile with use of AVX instructions. -no-avx2 ........... Do not compile with use of AVX2 instructions. -no-neon ........... Do not compile with use of NEON instructions. -no-mips_dsp ....... Do not compile with use of MIPS DSP instructions. -no-mips_dspr2 ..... Do not compile with use of MIPS DSP rev2 instructions. -qtnamespace Wraps all Qt library code in 'namespace {...}'. -qtlibinfix Renames all libQt*.so to libQt*.so. -testcocoon Instrument Qt with the TestCocoon code coverage tool. -D ........ Add an explicit define to the preprocessor. -I ........ Add an explicit include path. -L ........ Add an explicit library path. + -pkg-config ........ Use pkg-config to detect include and library paths. By default, configure determines whether to use pkg-config or not with some heuristics such as checking the environment variables. -no-pkg-config ..... Disable use of pkg-config. -force-pkg-config .. Force usage of pkg-config (skips pkg-config usability detection heuristic). -help, -h .......... Display this information. Third Party Libraries: -qt-zlib ........... Use the zlib bundled with Qt. + -system-zlib ....... Use zlib from the operating system. See http://www.gzip.org/zlib -no-gif ............ Do not compile GIF reading support. -no-libpng ......... Do not compile PNG support. -qt-libpng ......... Use the libpng bundled with Qt. + -system-libpng ..... Use libpng from the operating system. See http://www.libpng.org/pub/png -no-libjpeg ........ Do not compile JPEG support. -qt-libjpeg ........ Use the libjpeg bundled with Qt. + -system-libjpeg .... Use libjpeg from the operating system. See http://www.ijg.org -no-openssl ........ Do not compile support for OpenSSL. + -openssl ........... Enable run-time OpenSSL support. -openssl-linked .... Enabled linked OpenSSL support. -qt-pcre ........... Use the PCRE library bundled with Qt. + -system-pcre ....... Use the PCRE library from the operating system. -qt-xcb ............ Use xcb- libraries bundled with Qt. (libxcb.so will still be used from operating system). + -system-xcb ........ Use xcb- libraries from the operating system. Additional options: -make ....... Add part to the list of parts to be built at make time. ($QT_DEFAULT_BUILD_PARTS) -nomake ..... Exclude part from the list of parts to be built. -no-gui ............ Don't build the Qt GUI module and dependencies. + -gui ............... Build the Qt GUI module and dependencies. -no-widgets ........ Don't build the Qt Widgets module and dependencies. + -widgets ........... Build the Qt Widgets module and dependencies. -R ........ Add an explicit runtime library path to the Qt libraries. -l ........ Add an explicit library. -no-rpath .......... Do not use the library install path as a runtime library path. + -rpath ............. Link Qt libraries and executables using the library install path as a runtime library path. Equivalent to -R install_libpath -continue .......... Continue as far as possible if an error occurs. -verbose, -v ....... Print verbose information about each step of the configure process. -silent ............ Reduce the build output so that warnings and errors can be seen more easily. * -no-optimized-qmake ... Do not build qmake optimized. -optimized-qmake ...... Build qmake optimized. $NSN -no-nis ............ Do not compile NIS support. $NSY -nis ............... Compile NIS support. $CUN -no-cups ........... Do not compile CUPS support. $CUY -cups .............. Compile CUPS support. Requires cups/cups.h and libcups.so.2. $CIN -no-iconv .......... Do not compile support for iconv(3). $CIY -iconv ............. Compile support for iconv(3). -no-icu ............ Do not compile support for ICU libraries. + -icu ............... Compile support for ICU libraries. -no-strip .......... Do not strip binaries and libraries of unneeded symbols. * -strip ............. Strip binaries and libraries of unneeded symbols when installing. $PHN -no-pch ............ Do not use precompiled header support. $PHY -pch ............... Use precompiled header support. $DBN -no-dbus ........... Do not compile the Qt D-Bus module. $DBY -dbus .............. Compile the Qt D-Bus module and dynamically load libdbus-1. -dbus-linked ....... Compile the Qt D-Bus module and link to libdbus-1. -reduce-relocations ..... Reduce relocations in the libraries through extra linker optimizations (Qt/X11 and Qt for Embedded Linux only; experimental; needs GNU ld >= 2.18). -force-asserts ........ Force Q_ASSERT to be enabled even in release builds. -device ............... Cross-compile for device (experimental) -device-option ... Add device specific options for the device mkspec (experimental) $SBN -no-separate-debug-info . Do not store debug information in a separate file. $SBY -separate-debug-info .... Strip debug information into a separate file. $XCBN -no-xcb ............ Do not compile Xcb (X protocol C-language Binding) support. $XCBY -xcb ............... Compile Xcb support. $EGLFSN -no-eglfs .......... Do not compile EGLFS (EGL Full Screen/Single Surface) support. $EGLFSY -eglfs ............. Compile EGLFS support (Requires OpenGL ES 2 support). $DFBN -no-directfb ....... Do not compile DirectFB support. $DFBY -directfb .......... Compile DirectFB support. $LFBN -no-linuxfb ........ Do not compile Linux Framebuffer support. $LFBY -linuxfb ........... Compile Linux Framebuffer support. $KMSN -no-kms ............ Do not compile KMS support. $KMSY -kms ............... Compile KMS support (Requires EGL and OpenGL ES 2 support). -qpa ......... Sets the default QPA platform (e.g xcb, cocoa, windows). -xplatform target ... The target platform when cross-compiling. -sysroot ...... Sets as the target compiler's and qmake's sysroot and also sets pkg-config paths. -no-gcc-sysroot ..... When using -sysroot, it disables the passing of --sysroot to the compiler -no-feature- Do not compile in . -feature- .. Compile in . The available features are described in src/corelib/global/qfeatures.txt -qconfig local ...... Use src/corelib/global/qconfig-local.h rather than the default ($CFG_QCONFIG). -no-opengl .......... Do not support OpenGL. -opengl ....... Enable OpenGL support With no parameter, this will attempt to auto-detect OpenGL ES 2, or regular desktop OpenGL. Use es2 for to override auto-detection. * -no-system-proxies .. Do not use system network proxies by default. -system-proxies ..... Use system network proxies by default. $GBN -no-glib ........... Do not compile Glib support. $GBY -glib .............. Compile Glib support. EOF if [ "$XPLATFORM_MAEMO" = "yes" ]; then cat << EOF $X2N -no-xinput2......... Do not compile XInput2 support. $X2Y -xinput2............ Compile XInput2 support. EOF fi if [ "$XPLATFORM_QNX" = "yes" ]; then cat << EOF -no-slog2 .......... Do not compile with slog2 support. -slog2 ............. Compile with slog2 support. EOF fi if [ "$BUILD_ON_MAC" = "yes" ]; then cat << EOF Qt/Mac only: -Fstring ........... Add an explicit framework path. -fw string ......... Add an explicit framework. * -framework ......... Build Qt as a series of frameworks and link tools against those frameworks. -no-framework ...... Do not build Qt as a series of frameworks. -sdk ......... Build Qt using Apple provided SDK . The argument should be one of the available SDKs as listed by 'xcodebuild -showsdks'. -harfbuzz .......... Use HarfBuzz to do text layout instead of Core Text when possible. * -no-harfbuzz ....... Disable HarfBuzz on Mac. It can still be enabled by setting QT_ENABLE_HARFBUZZ environment variable. EOF fi [ "x$ERROR" = "xyes" ] && exit 1 exit 0 fi # Help # ----------------------------------------------------------------------------- # LICENSING, INTERACTIVE PART # ----------------------------------------------------------------------------- echo echo "This is the Qt ${EditionString} Edition." echo if [ "$Edition" = "OpenSource" ]; then while true; do echo "You are licensed to use this software under the terms of" echo "the Lesser GNU General Public License (LGPL) versions 2.1." if [ -f "$relpath/LICENSE.GPL3" ]; then echo "You are also licensed to use this software under the terms of" echo "the GNU General Public License (GPL) versions 3." affix="either" else affix="the" fi echo if [ "$OPT_CONFIRM_LICENSE" = "yes" ]; then echo "You have already accepted the terms of the $LicenseType license." acceptance=yes else if [ -f "$relpath/LICENSE.GPL3" ]; then echo "Type '3' to view the GNU General Public License version 3." fi echo "Type 'L' to view the Lesser GNU General Public License version 2.1." echo "Type 'yes' to accept this license offer." echo "Type 'no' to decline this license offer." echo echo $ECHO_N "Do you accept the terms of $affix license? $ECHO_C" read acceptance fi echo if [ "$acceptance" = "yes" ] || [ "$acceptance" = "y" ]; then break elif [ "$acceptance" = "no" ]; then echo "You are not licensed to use this software." echo exit 1 elif [ "$acceptance" = "3" ]; then more "$relpath/LICENSE.GPL3" elif [ "$acceptance" = "L" ]; then more "$relpath/LICENSE.LGPL" fi done elif [ "$Edition" = "Preview" ]; then TheLicense=`head -n 1 "$relpath/LICENSE.PREVIEW.COMMERCIAL"` while true; do if [ "$OPT_CONFIRM_LICENSE" = "yes" ]; then echo "You have already accepted the terms of the $LicenseType license." acceptance=yes else echo "You are licensed to use this software under the terms of" echo "the $TheLicense" echo echo "Type '?' to read the Preview License." echo "Type 'yes' to accept this license offer." echo "Type 'no' to decline this license offer." echo echo $ECHO_N "Do you accept the terms of the license? $ECHO_C" read acceptance fi echo if [ "$acceptance" = "yes" ]; then break elif [ "$acceptance" = "no" ] ;then echo "You are not licensed to use this software." echo exit 0 elif [ "$acceptance" = "?" ]; then more "$relpath/LICENSE.PREVIEW.COMMERCIAL" fi done elif [ "$Edition" != "OpenSource" ]; then if [ -n "$ExpiryDate" ]; then ExpiryDate=`echo $ExpiryDate | sed -e "s,-,,g" | tr -d "\n\r"` [ -z "$ExpiryDate" ] && ExpiryDate="0" Today=`date +%Y%m%d` if [ "$Today" -gt "$ExpiryDate" ]; then case "$LicenseType" in Commercial|Academic|Educational) echo echo "WARNING WARNING WARNING WARNING" echo echo " Your support and upgrade period has expired." echo echo " You may continue to use your last licensed release" echo " of Qt under the terms of your existing license" echo " agreement. But you are not entitled to technical" echo " support, nor are you entitled to use any more recent" echo " Qt releases." echo echo " Please use the contact form at http://qt.digia.com/contact-us" echo " to renew your support and upgrades for this license." echo echo "WARNING WARNING WARNING WARNING" echo sleep 3 ;; Evaluation|*) echo echo "NOTICE NOTICE NOTICE NOTICE" echo echo " Your Evaluation license has expired." echo echo " You are no longer licensed to use this software. Please" echo " use the contact form at http://qt.digia.com/contact-us to" echo " purchase license, or install the Qt Open Source Edition" echo " if you intend to develop free software." echo echo "NOTICE NOTICE NOTICE NOTICE" echo exit 1 ;; esac fi fi TheLicense=`head -n 1 "$outpath/LICENSE"` while true; do if [ "$OPT_CONFIRM_LICENSE" = "yes" ]; then echo "You have already accepted the terms of the $TheLicense." acceptance=yes else echo "You are licensed to use this software under the terms of" echo "the $TheLicense." echo echo "Type '?' to view the $TheLicense." echo "Type 'yes' to accept this license offer." echo "Type 'no' to decline this license offer." echo echo $ECHO_N "Do you accept the terms of the $TheLicense? $ECHO_C" read acceptance fi echo if [ "$acceptance" = "yes" ]; then break elif [ "$acceptance" = "no" ]; then echo "You are not licensed to use this software." echo exit 1 else [ "$acceptance" = "?" ] more "$outpath/LICENSE" fi done fi # this should be moved somewhere else case "$PLATFORM" in aix-*) AIX_VERSION=`uname -v` if [ "$AIX_VERSION" -lt "5" ]; then QMakeVar add QMAKE_LIBS_X11 -lbind fi ;; *) ;; esac #------------------------------------------------------------------------------- # generate qconfig.cpp #------------------------------------------------------------------------------- [ -d "$outpath/src/corelib/global" ] || mkdir -p "$outpath/src/corelib/global" shortxspec=`echo $XQMAKESPEC | sed "s,^${relpath}/mkspecs/,,"` shortspec=`echo $QMAKESPEC | sed "s,^${relpath}/mkspecs/,,"` cat > "$outpath/src/corelib/global/qconfig.cpp.new" <> "$outpath/src/corelib/global/qconfig.cpp.new" </dev/null 2>&1; then EVALKEY=qt_qevalkey= fi if [ -n "$EVALKEY" ]; then rm -f "$outpath/src/corelib/global/qconfig_eval.cpp" cat > "$outpath/src/corelib/global/qconfig_eval.cpp" <> "$mkfile" } # build qmake if true; then ###[ '!' -f "$outpath/bin/qmake" ]; echo "Creating qmake. Please wait..." mkdir -p "$outpath/qmake" || exit # fix makefiles for mkfile in GNUmakefile Makefile; do EXTRA_LFLAGS= EXTRA_CFLAGS= in_mkfile="${mkfile}.in" if [ "$mkfile" = "Makefile" ]; then # if which qmake >/dev/null 2>&1 && [ -f qmake/qmake.pro ]; then # (cd qmake && qmake) >/dev/null 2>&1 && continue # fi in_mkfile="${mkfile}.unix" fi in_mkfile="$relpath/qmake/$in_mkfile" mkfile="$outpath/qmake/$mkfile" if [ -f "$mkfile" ]; then [ "$CFG_DEV" = "yes" ] && "$WHICH" chflags >/dev/null 2>&1 && chflags nouchg "$mkfile" rm -f "$mkfile" fi [ -f "$in_mkfile" ] || continue echo "########################################################################" > "$mkfile" echo "## This file was autogenerated by configure, all changes will be lost ##" >> "$mkfile" echo "########################################################################" >> "$mkfile" EXTRA_OBJS= EXTRA_SRCS= EXTRA_CFLAGS="\$(QMAKE_CFLAGS)" EXTRA_CXXFLAGS="\$(QMAKE_CXXFLAGS)" EXTRA_LFLAGS="\$(QMAKE_LFLAGS)" if [ "$PLATFORM" = "irix-cc" ] || [ "$PLATFORM" = "irix-cc-64" ]; then EXTRA_LFLAGS="$EXTRA_LFLAGS -lm" fi [ "$CFG_SILENT" = "yes" ] && CC_TRANSFORM='s,^,\@,' || CC_TRANSFORM= setBootstrapVariable QMAKE_CC CC "$CC_TRANSFORM" setBootstrapVariable QMAKE_CXX CXX "$CC_TRANSFORM" setBootstrapVariable QMAKE_CFLAGS setBootstrapVariable QMAKE_CXXFLAGS setBootstrapVariable QMAKE_LFLAGS if [ "$CFG_RELEASE_QMAKE" = "yes" ]; then setBootstrapVariable QMAKE_CFLAGS_RELEASE setBootstrapVariable QMAKE_CXXFLAGS_RELEASE EXTRA_CFLAGS="$EXTRA_CFLAGS \$(QMAKE_CFLAGS_RELEASE)" EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(QMAKE_CXXFLAGS_RELEASE)" elif [ "$CFG_DEBUG" = "yes" ]; then setBootstrapVariable QMAKE_CFLAGS_DEBUG setBootstrapVariable QMAKE_CXXFLAGS_DEBUG EXTRA_CFLAGS="$EXTRA_CFLAGS \$(QMAKE_CFLAGS_DEBUG)" EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(QMAKE_CXXFLAGS_DEBUG)" fi if [ -n "$RPATH_FLAGS" ] && [ -n "`getQMakeConf 'QMAKE_(LFLAGS_)?RPATH'`" ]; then setBootstrapVariable "QMAKE_(LFLAGS_)?RPATH" QMAKE_LFLAGS_RPATH for rpath in $RPATH_FLAGS; do EXTRA_LFLAGS="\$(QMAKE_LFLAGS_RPATH)\"$rpath\" $EXTRA_LFLAGS" done fi if [ "$BUILD_ON_MSYS" = "yes" ]; then EXTRA_CFLAGS="-DUNICODE" EXTRA_CXXFLAGS="-DUNICODE" EXTRA_OBJS="qfilesystemengine_win.o \ qfilesystemiterator_win.o \ qfsfileengine_win.o \ qlocale_win.o \ qsettings_win.o \ qsystemlibrary.o \ registry.o" EXTRA_SRCS="\"\$(SOURCE_PATH)/src/corelib/corelib/io/qfilesystemengine_win.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/io/qfilesystemiterator_win.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/io/qfsfileengine_win.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/io/qsettings_win.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/tools/qlocale_win.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/plugin/qsystemlibrary.cpp\" \ \"\$(SOURCE_PATH)/tools/shared/windows/registry.cpp\"" EXTRA_LFLAGS="-static -s -lole32 -luuid -ladvapi32 -lkernel32" EXEEXT=".exe" else EXTRA_OBJS="qfilesystemengine_unix.o \ qfilesystemiterator_unix.o \ qfsfileengine_unix.o \ qlocale_unix.o" EXTRA_SRCS="\"\$(SOURCE_PATH)/src/corelib/io/qfilesystemengine_unix.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/io/qfilesystemiterator_unix.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/io/qfsfileengine_unix.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/tools/qlocal_unix.cpp\"" EXEEXT= fi if [ "$BUILD_ON_MAC" = "yes" ]; then echo "export MACOSX_DEPLOYMENT_TARGET = 10.6" >> "$mkfile" echo "CARBON_LFLAGS =-framework ApplicationServices" >>"$mkfile" echo "CARBON_CFLAGS =-fconstant-cfstrings" >>"$mkfile" EXTRA_LFLAGS="$EXTRA_LFLAGS \$(CARBON_LFLAGS)" EXTRA_CFLAGS="$EXTRA_CFLAGS \$(CARBON_CFLAGS)" EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(CARBON_CFLAGS)" EXTRA_OBJS="$EXTRA_OBJS \ qsettings_mac.o \ qcore_mac.o" EXTRA_SRCS="$EXTRA_SRCS \ \"\$(SOURCE_PATH)/src/corelib/io/qsettings_mac.cpp\" \ \"\$(SOURCE_PATH)/src/corelib/kernel/qcore_mac.cpp\"" fi if [ '!' -z "$D_FLAGS" ]; then EXTRA_CFLAGS="$EXTRA_CFLAGS $D_FLAGS" fi QMAKE_BIN_DIR="$QT_INSTALL_BINS" [ -z "$QMAKE_BIN_DIR" ] && QMAKE_BIN_DIR="${QT_INSTALL_PREFIX}/bin" QMAKE_DATA_DIR="$QT_INSTALL_ARCHDATA" [ -z "$QMAKE_DATA_DIR" ] && QMAKE_DATA_DIR="${QT_INSTALL_PREFIX}" echo >>"$mkfile" adjrelpath=`echo "$relpath" | sed 's/ /\\\\\\\\ /g'` adjoutpath=`echo "$outpath" | sed 's/ /\\\\\\\\ /g'` adjqmakespec=`echo "$QMAKESPEC" | sed 's/ /\\\\\\\\ /g'` echo "BUILD_PATH = $adjoutpath" >> "$mkfile" echo "SOURCE_PATH = $adjrelpath" >> "$mkfile" echo "QMAKESPEC = $adjqmakespec" >> "$mkfile" echo "QT_VERSION = $QT_VERSION" >> "$mkfile" echo "EXTRA_CFLAGS = $EXTRA_CFLAGS" >> "$mkfile" echo "EXTRA_CXXFLAGS = $EXTRA_CXXFLAGS" >> "$mkfile" echo "QTOBJS = $EXTRA_OBJS" >> "$mkfile" echo "QTSRCS = $EXTRA_SRCS" >> "$mkfile" echo "LFLAGS = $EXTRA_LFLAGS" >> "$mkfile" echo "QT_INSTALL_BINS = \$(INSTALL_ROOT)$QMAKE_BIN_DIR" >> "$mkfile" echo "QT_INSTALL_DATA = \$(INSTALL_ROOT)$QMAKE_DATA_DIR" >> "$mkfile" echo "EXEEXT = $EXEEXT" >> "$mkfile" echo "RM_F = rm -f" >> "$mkfile" echo "RM_RF = rm -rf" >> "$mkfile" if [ $QT_EDITION = "QT_EDITION_OPENSOURCE" ]; then echo "EXTRA_CPPFLAGS = -DQMAKE_OPENSOURCE_EDITION" >> "$mkfile" fi cat "$in_mkfile" >> "$mkfile" if "$WHICH" makedepend >/dev/null 2>&1 && grep 'depend:' "$mkfile" >/dev/null 2>&1; then (cd "$outpath/qmake" && "$MAKE" -f "$mkfile" depend) >/dev/null 2>&1 sed "s,^.*/\([^/]*.o\):,\1:,g" "$mkfile" >"$mkfile.tmp" sed "s,$outpath,$adjoutpath,g" "$mkfile.tmp" >"$mkfile" rm "$mkfile.tmp" fi done (cd "$outpath/qmake"; "$MAKE") || exit 2 fi # Build qmake #------------------------------------------------------------------------------- # create a qt.conf for the Qt build tree itself #------------------------------------------------------------------------------- QTCONFFILE="$outpath/bin/qt.conf" cat > "$QTCONFFILE" </dev/null` fi if [ "$CFG_PKGCONFIG" = "no" ]; then PKG_CONFIG= elif [ "$CFG_PKGCONFIG" = "force" ]; then echo >&2 "" echo >&2 "You have asked to use pkg-config. Please make sure you have" echo >&2 "a correctly setup pkg-config environment!" echo >&2 "" elif [ -n "$PKG_CONFIG" ]; then # found a pkg-config if [ "$QT_CROSS_COMPILE" = "yes" ]; then # when xcompiling, check environment to see if it's actually usable if [ -z "$PKG_CONFIG_LIBDIR" ]; then if [ -n "$CFG_SYSROOT" ] && [ -d "$CFG_SYSROOT/usr/lib/pkgconfig" ]; then PKG_CONFIG_LIBDIR=$CFG_SYSROOT/usr/lib/pkgconfig:$CFG_SYSROOT/usr/share/pkgconfig if [ -n "$GCC_MACHINE_DUMP" ]; then PKG_CONFIG_LIBDIR=$PKG_CONFIG_LIBDIR:$CFG_SYSROOT/usr/lib/$GCC_MACHINE_DUMP/pkgconfig fi export PKG_CONFIG_LIBDIR echo >&2 "Note: PKG_CONFIG_LIBDIR automatically set to $PKG_CONFIG_LIBDIR" elif [ "$CFG_PKGCONFIG" = "yes" ]; then echo >&2 "Error: PKG_CONFIG_LIBDIR has not been set. This could mean" echo >&2 "the host's .pc files will be used (even if you set PKG_CONFIG_PATH)." echo >&2 "Set this variable to the directory that contains target .pc files" echo >&2 "for pkg-config to function correctly when cross-compiling or" echo >&2 "use -force-pkg-config to override this test." exit 101 else PKG_CONFIG= echo >&2 "Warning: Disabling pkg-config since PKG_CONFIG_LIBDIR is not set." fi fi if [ -z "$PKG_CONFIG_SYSROOT_DIR" ]; then if [ -n "$CFG_SYSROOT" ]; then PKG_CONFIG_SYSROOT_DIR=$CFG_SYSROOT export PKG_CONFIG_SYSROOT_DIR echo >&2 "Note: PKG_CONFIG_SYSROOT_DIR automatically set to $PKG_CONFIG_SYSROOT_DIR" elif [ "$CFG_PKGCONFIG" = "yes" ]; then echo >&2 "Error: PKG_CONFIG_SYSROOT_DIR has not been set. Set this variable" echo >&2 "to your sysroot for pkg-config to function correctly when cross-compiling" echo >&2 "or use -force-pkg-config to override this test." exit 101 else PKG_CONFIG= echo >&2 "Warning: Disabling pkg-config since PKG_CONFIG_SYSROOT_DIR is not set." fi fi fi elif [ "$CFG_PKGCONFIG" = "yes" ]; then echo >&2 "Could not detect pkg-config from mkspec or PATH." exit 101 fi if [ -z "$PKG_CONFIG" ]; then QT_CONFIG="$QT_CONFIG no-pkg-config" fi #------------------------------------------------------------------------------- # tests that need qmake #------------------------------------------------------------------------------- # parameters: path, name, extra args compileTest() { path=config.tests/$1 name=$2 shift 2 "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "$path" "$name" $I_FLAGS $D_FLAGS $L_FLAGS "$@" } #------------------------------------------------------------------------------- # determine the target and host architectures #------------------------------------------------------------------------------- # Use config.tests/arch/arch.pro to have the compiler tell us what the target architecture is OUTFILE=$outpath/arch.result "$unixtests/arch.test" "$XQMAKESPEC" $OPT_VERBOSE "$relpath" "$outpath" "$OUTFILE" "target" if [ $? -eq 0 ]; then eval `cat "$OUTFILE"` else echo echo "Could not determine the target architecture!" echo "Turn on verbose messaging (-v) to see the final report." fi rm -f "$OUTFILE" 2>/dev/null [ -z "$CFG_ARCH" ] && CFG_ARCH="unknown" if [ "$QMAKESPEC" != "$XQMAKESPEC" ]; then # Do the same test again, using the host compiler SYSROOT_FLAG= "$unixtests/arch.test" "$QMAKESPEC" $OPT_VERBOSE "$relpath" "$outpath" "$OUTFILE" "host" if [ $? -eq 0 ]; then eval `cat "$OUTFILE"` else echo echo "Could not determine the host architecture!" echo "Turn on verbose messaging (-v) to see the final report." fi rm -f "$OUTFILE" 2>/dev/null [ -z "$CFG_HOST_ARCH" ] && CFG_HOST_ARCH="unknown" else # not cross compiling, host == target CFG_HOST_ARCH="$CFG_ARCH" CFG_HOST_CPUFEATURES="$CFG_CPUFEATURES" fi unset OUTFILE if [ "$OPT_VERBOSE" = "yes" ]; then echo "System architecture: '$CFG_ARCH'" echo "Host architecture: '$CFG_HOST_ARCH'" fi #------------------------------------------------------------------------------- # functionality tests #------------------------------------------------------------------------------- # Detect C++11 support if [ "$CFG_CXX11" != "no" ]; then if compileTest common/c++11 "C++11"; then CFG_CXX11="yes" elif [ "$CFG_CXX11" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "C++11 support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_CXX11="no" fi fi # detect availability of float math.h functions if compileTest unix/floatmath "floatmath"; then CFG_USE_FLOATMATH=yes else CFG_USE_FLOATMATH=no fi # detect sse2 support if [ "${CFG_SSE2}" = "auto" ]; then if compileTest common/sse2 "sse2"; then CFG_SSE2=yes else CFG_SSE2=no fi fi # detect sse3 support if [ "${CFG_SSE3}" = "auto" ]; then if compileTest common/sse3 "sse3"; then CFG_SSE3=yes else CFG_SSE3=no fi fi # detect ssse3 support if [ "${CFG_SSSE3}" = "auto" ]; then if compileTest common/ssse3 "ssse3"; then CFG_SSSE3=yes else CFG_SSSE3=no fi fi # detect sse4.1 support if [ "${CFG_SSE4_1}" = "auto" ]; then if compileTest common/sse4_1 "sse4_1"; then CFG_SSE4_1=yes else CFG_SSE4_1=no fi fi # detect sse4.2 support if [ "${CFG_SSE4_2}" = "auto" ]; then if compileTest common/sse4_2 "sse4_2"; then CFG_SSE4_2=yes else CFG_SSE4_2=no fi fi # detect avx support if [ "${CFG_AVX}" = "auto" ]; then if compileTest common/avx "avx"; then case "$XQMAKESPEC" in *g++*|*-clang*) # Some clang versions produce internal compiler errors compiling Qt AVX code case `$TEST_COMPILER --version` in Apple\ clang\ version\ 2*|Apple\ clang\ version\ 3.0*) CFG_AVX=no if [ "$OPT_VERBOSE" = "yes" ]; then echo 'AVX support disabled for blacklisted clang compiler' fi ;; *) CFG_AVX=yes ;; esac ;; *) CFG_AVX=yes ;; esac else CFG_AVX=no fi fi # detect avx2 support if [ "${CFG_AVX}" = "no" ]; then CFG_AVX2=no fi if [ "${CFG_AVX2}" = "auto" ]; then if compileTest common/avx2 "avx2"; then CFG_AVX2=yes else CFG_AVX2=no fi fi # check iWMMXt support if [ "$CFG_IWMMXT" = "yes" ]; then compileTest unix/iwmmxt "iwmmxt" if [ $? != "0" ]; then echo "The iWMMXt functionality test failed!" echo " Please make sure your compiler supports iWMMXt intrinsics!" exit 1 fi fi # detect neon support if [ "$CFG_ARCH" = "arm" ] && [ "${CFG_NEON}" = "auto" ]; then if compileTest unix/neon "neon"; then CFG_NEON=yes else CFG_NEON=no fi elif [ "$CFG_ARCH" != "arm" ]; then CFG_NEON=no fi # detect mips_dsp support if [ "$CFG_ARCH" = "mips" ] && [ "${CFG_MIPS_DSP}" = "auto" ]; then if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mips_dsp "mips_dsp" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS; then CFG_MIPS_DSP=yes else CFG_MIPS_DSP=no fi elif [ "$CFG_ARCH" != "mips" ]; then CFG_MIPS_DSP=no fi # detect mips_dspr2 support if [ "$CFG_ARCH" = "mips" ] && [ "${CFG_MIPS_DSPR2}" = "auto" ]; then if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mips_dspr2 "mips_dspr2" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS; then CFG_MIPS_DSPR2=yes else CFG_MIPS_DSPR2=no fi elif [ "$CFG_ARCH" != "mips" ]; then CFG_MIPS_DSPR2=no fi [ "$XPLATFORM_MINGW" = "yes" ] && QMakeVar add styles "windowsxp windowsvista" # detect zlib if [ "$CFG_ZLIB" = "no" ]; then # Note: Qt no longer support builds without zlib # So we force a "no" to be "auto" here. # If you REALLY really need no zlib support, you can still disable # it by doing the following: # add "no-zlib" to mkspecs/qconfig.pri # #define QT_NO_COMPRESS (probably by adding to src/corelib/global/qconfig.h) # # There's no guarantee that Qt will build under those conditions CFG_ZLIB=auto ZLIB_FORCED=yes fi if [ "$XPLATFORM_QNX" = "yes" ]; then if [ "$CFG_SLOG2" != "no" ]; then if compileTest unix/slog2 "slog2"; then CFG_SLOG2=yes QMAKE_CONFIG="$QMAKE_CONFIG slog2" else CFG_SLOG2=no fi fi fi if [ "$CFG_ZLIB" = "auto" ]; then if compileTest unix/zlib "zlib"; then CFG_ZLIB=system else CFG_ZLIB=yes fi fi if [ "$CFG_LARGEFILE" = "auto" ]; then #Large files should be enabled for all Linux systems CFG_LARGEFILE=yes fi if [ "$CFG_GUI" = "no" ]; then QPA_PLATFORM_GUARD=no fi # detect how jpeg should be built if [ "$CFG_JPEG" = "auto" ]; then if [ "$CFG_SHARED" = "yes" ]; then CFG_JPEG=plugin else CFG_JPEG=yes fi fi # detect jpeg if [ "$CFG_LIBJPEG" = "auto" ]; then if compileTest unix/libjpeg "libjpeg"; then CFG_LIBJPEG=system else CFG_LIBJPEG=qt fi fi # detect how gif should be built if [ "$CFG_GIF" = "auto" ]; then if [ "$CFG_SHARED" = "yes" ]; then CFG_GIF=plugin else CFG_GIF=yes fi fi # detect png if [ "$CFG_LIBPNG" = "auto" ]; then if compileTest unix/libpng "libpng"; then CFG_LIBPNG=system else CFG_LIBPNG=qt fi fi if [ "$CFG_EGLFS" = "yes" ]; then if [ "$CFG_EGL" = "no" ]; then echo "The EGLFS plugin requires EGL support and cannot be built" exit 101 fi if [ "$CFG_OPENGL" != "es2" ]; then echo "The EGLFS plugin requires OpenGL ES 2 support and cannot be built" exit 101 fi CFG_OPENGL="es2" CFG_EGL=yes fi if [ "$CFG_KMS" = "yes" ]; then if [ "$CFG_EGL" = "no" ]; then echo "The KMS plugin requires EGL support and cannot be built" exit 101 fi if [ "$CFG_OPENGL" != "es2" ]; then echo "The KMS plugin requires OpenGL ES 2 support and cannot be built" exit 101 fi fi # auto-detect SQL-modules support for _SQLDR in $CFG_SQL_AVAILABLE; do case $_SQLDR in mysql) if [ "$CFG_SQL_mysql" != "no" ]; then [ -z "$CFG_MYSQL_CONFIG" ] && CFG_MYSQL_CONFIG=`"$WHICH" mysql_config` if [ -x "$CFG_MYSQL_CONFIG" ]; then QT_CFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --include 2>/dev/null | filterIncludeOptions` QT_LFLAGS_MYSQL_R=`$CFG_MYSQL_CONFIG --libs_r 2>/dev/null | filterLibraryOptions` QT_LFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --libs 2>/dev/null | filterLibraryOptions` QT_MYSQL_VERSION=`$CFG_MYSQL_CONFIG --version 2>/dev/null` QT_MYSQL_VERSION_MAJOR=`echo $QT_MYSQL_VERSION | cut -d . -f 1` fi if [ -n "$QT_MYSQL_VERSION" ] && [ "$QT_MYSQL_VERSION_MAJOR" -lt 4 ]; then if [ "$CFG_SQL_mysql" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "This version of MySql is not supported ($QT_MYSQL_VERSION)." echo " You need MySql 4 or higher." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_mysql="no" QT_LFLAGS_MYSQL="" QT_LFLAGS_MYSQL_R="" QT_CFLAGS_MYSQL="" fi else if compileTest unix/mysql_r "MySQL (thread-safe)" $QT_LFLAGS_MYSQL_R $QT_CFLAGS_MYSQL; then QMakeVar add CONFIG use_libmysqlclient_r if [ "$CFG_SQL_mysql" = "auto" ]; then CFG_SQL_mysql=plugin fi QT_LFLAGS_MYSQL="$QT_LFLAGS_MYSQL_R" elif compileTest unix/mysql "MySQL (thread-unsafe)" $QT_LFLAGS_MYSQL $QT_CFLAGS_MYSQL; then if [ "$CFG_SQL_mysql" = "auto" ]; then CFG_SQL_mysql=plugin fi else if [ "$CFG_SQL_mysql" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "MySQL support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_mysql=no QT_LFLAGS_MYSQL="" QT_LFLAGS_MYSQL_R="" QT_CFLAGS_MYSQL="" fi fi fi fi ;; psql) if [ "$CFG_SQL_psql" != "no" ]; then # Be careful not to use native pg_config when cross building. if [ "$XPLATFORM_MINGW" != "yes" ] && "$WHICH" pg_config >/dev/null 2>&1; then QT_CFLAGS_PSQL=`pg_config --includedir 2>/dev/null | filterIncludePath` QT_LFLAGS_PSQL=`pg_config --libdir 2>/dev/null | filterLibraryPath` fi [ -z "$QT_CFLAGS_PSQL" ] || QT_CFLAGS_PSQL="-I$QT_CFLAGS_PSQL" [ -z "$QT_LFLAGS_PSQL" ] || QT_LFLAGS_PSQL="-L$QT_LFLAGS_PSQL" # But, respect PSQL_LIBS if set [ -z "$PSQL_LIBS" ] || QT_LFLAGS_PSQL="$PSQL_LIBS" if compileTest unix/psql "PostgreSQL" $QT_LFLAGS_PSQL $QT_CFLAGS_PSQL; then if [ "$CFG_SQL_psql" = "auto" ]; then CFG_SQL_psql=plugin fi else if [ "$CFG_SQL_psql" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "PostgreSQL support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_psql=no QT_CFLAGS_PSQL="" QT_LFLAGS_PSQL="" fi fi fi ;; odbc) if [ "$CFG_SQL_odbc" != "no" ]; then if ( [ "$BUILD_ON_MAC" != "yes" ] || [ "$XPLATFORM_MINGW" = "yes" ] ) && compileTest unix/odbc "ODBC"; then if [ "$CFG_SQL_odbc" = "auto" ]; then CFG_SQL_odbc=plugin fi else if compileTest unix/iodbc "iODBC"; then QT_LFLAGS_ODBC="-liodbc" if [ "$CFG_SQL_odbc" = "auto" ]; then CFG_SQL_odbc=plugin fi else if [ "$CFG_SQL_odbc" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "ODBC support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_odbc=no fi fi fi fi ;; oci) if [ "$CFG_SQL_oci" != "no" ]; then if compileTest unix/oci "OCI"; then if [ "$CFG_SQL_oci" = "auto" ]; then CFG_SQL_oci=plugin fi else if [ "$CFG_SQL_oci" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Oracle (OCI) support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_oci=no fi fi fi ;; tds) if [ "$CFG_SQL_tds" != "no" ]; then [ -z "$SYBASE" ] || QT_LFLAGS_TDS="-L$SYBASE/lib" [ -z "$SYBASE_LIBS" ] || QT_LFLAGS_TDS="$QT_LFLAGS_TDS $SYBASE_LIBS" if compileTest unix/tds "TDS" $QT_LFLAGS_TDS; then if [ "$CFG_SQL_tds" = "auto" ]; then CFG_SQL_tds=plugin fi else if [ "$CFG_SQL_tds" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "TDS support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_tds=no fi fi fi ;; db2) if [ "$CFG_SQL_db2" != "no" ]; then if compileTest unix/db2 "DB2"; then if [ "$CFG_SQL_db2" = "auto" ]; then CFG_SQL_db2=plugin fi else if [ "$CFG_SQL_db2" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "ODBC support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_db2=no fi fi fi ;; ibase) if [ "$CFG_SQL_ibase" != "no" ]; then if compileTest unix/ibase "InterBase"; then if [ "$CFG_SQL_ibase" = "auto" ]; then CFG_SQL_ibase=plugin fi else if [ "$CFG_SQL_ibase" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "InterBase support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_ibase=no fi fi fi ;; sqlite2) if [ "$CFG_SQL_sqlite2" != "no" ]; then if compileTest unix/sqlite2 "SQLite2"; then if [ "$CFG_SQL_sqlite2" = "auto" ]; then CFG_SQL_sqlite2=plugin fi else if [ "$CFG_SQL_sqlite2" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "SQLite2 support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_SQL_sqlite2=no fi fi fi ;; sqlite) if [ "$CFG_SQL_sqlite" != "no" ]; then SQLITE_AUTODETECT_FAILED="no" if [ "$CFG_SQLITE" = "system" ]; then if [ -n "$PKG_CONFIG" ]; then QT_CFLAGS_SQLITE=`$PKG_CONFIG --cflags sqlite3 2>/dev/null` QT_LFLAGS_SQLITE=`$PKG_CONFIG --libs sqlite3 2>/dev/null` else QT_CFLAGS_SQLITE= QT_LFLAGS_SQLITE="-lsqlite3 -lz" fi if compileTest unix/sqlite "SQLite" $QT_LFLAGS_SQLITE $QT_CFLAGS_SQLITE; then if [ "$CFG_SQL_sqlite" = "auto" ]; then CFG_SQL_sqlite=plugin fi QMAKE_CONFIG="$QMAKE_CONFIG system-sqlite" else SQLITE_AUTODETECT_FAILED="yes" CFG_SQL_sqlite=no fi elif [ -f "$relpath/src/3rdparty/sqlite/sqlite3.h" ]; then if [ "$CFG_SQL_sqlite" = "auto" ]; then CFG_SQL_sqlite=plugin fi else SQLITE_AUTODETECT_FAILED="yes" CFG_SQL_sqlite=no fi if [ "$SQLITE_AUTODETECT_FAILED" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "SQLite support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 fi fi ;; *) if [ "$OPT_VERBOSE" = "yes" ]; then echo "unknown SQL driver: $_SQLDR" fi ;; esac done # auto-detect NIS support if [ "$CFG_NIS" != "no" ]; then if compileTest unix/nis "NIS"; then CFG_NIS=yes else if [ "$CFG_NIS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "NIS support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_NIS=no fi fi fi # auto-detect CUPS support if [ "$CFG_CUPS" != "no" ]; then if compileTest unix/cups "Cups"; then CFG_CUPS=yes else if [ "$CFG_CUPS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Cups support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_CUPS=no fi fi fi # auto-detect iconv(3) support if [ "$CFG_ICONV" != "no" ]; then if [ "$XPLATFORM_MINGW" = "yes" ]; then CFG_ICONV=no elif compileTest unix/iconv "POSIX iconv"; then CFG_ICONV=yes elif compileTest unix/sun-libiconv "SUN libiconv"; then CFG_ICONV=sun elif compileTest unix/gnu-libiconv "GNU libiconv"; then CFG_ICONV=gnu else if [ "$CFG_ICONV" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Iconv support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_ICONV=no fi fi fi # auto-detect libdbus-1 support if [ "$CFG_DBUS" != "no" ]; then if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --atleast-version="$MIN_DBUS_1_VERSION" dbus-1 2>/dev/null; then QT_CFLAGS_DBUS=`$PKG_CONFIG --cflags dbus-1 2>/dev/null` QT_LIBS_DBUS=`$PKG_CONFIG --libs dbus-1 2>/dev/null` fi if compileTest unix/dbus "D-Bus" $QT_CFLAGS_DBUS $QT_LIBS_DBUS; then [ "$CFG_DBUS" = "auto" ] && CFG_DBUS=yes QMakeVar set QT_CFLAGS_DBUS "$QT_CFLAGS_DBUS" QMakeVar set QT_LIBS_DBUS "$QT_LIBS_DBUS" else if [ "$CFG_DBUS" = "auto" ]; then CFG_DBUS=no elif [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then # CFG_DBUS is "yes" or "linked" here echo "The Qt D-Bus module cannot be enabled because libdbus-1 version $MIN_DBUS_1_VERSION was not found." echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 fi fi fi # auto-detect Glib support if [ "$CFG_GLIB" != "no" ]; then if [ -n "$PKG_CONFIG" ]; then QT_CFLAGS_GLIB=`$PKG_CONFIG --cflags glib-2.0 gthread-2.0 2>/dev/null` QT_LIBS_GLIB=`$PKG_CONFIG --libs glib-2.0 gthread-2.0 2>/dev/null` fi if compileTest unix/glib "Glib" $QT_CFLAGS_GLIB $QT_LIBS_GLIB; then CFG_GLIB=yes QMakeVar set QT_CFLAGS_GLIB "$QT_CFLAGS_GLIB" QMakeVar set QT_LIBS_GLIB "$QT_LIBS_GLIB" else if [ "$CFG_GLIB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Glib support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_GLIB=no fi fi fi # auto-detect GTK style support if [ "$CFG_GLIB" = "yes" -a "$CFG_QGTKSTYLE" != "no" ]; then if [ -n "$PKG_CONFIG" ]; then QT_CFLAGS_QGTK2=`$PKG_CONFIG --cflags gtk+-2.0 ">=" 2.18 atk 2>/dev/null` QT_LIBS_QGTK2=`$PKG_CONFIG --libs gtk+-2.0 2>/dev/null` QT_LIBS_QGOBJECT=`$PKG_CONFIG --libs gobject-2.0 2>/dev/null` fi if [ -n "$QT_CFLAGS_QGTK2" ] ; then CFG_QGTKSTYLE=yes QT_CONFIG="$QT_CONFIG gtk2 gtkstyle" QMakeVar set QT_CFLAGS_QGTKSTYLE "$QT_CFLAGS_QGTK2" QMakeVar set QT_LIBS_QGTKSTYLE "$QT_LIBS_QGOBJECT" QMakeVar set QT_CFLAGS_QGTK2 "$QT_CFLAGS_QGTK2" QMakeVar set QT_LIBS_QGTK2 "$QT_LIBS_QGTK2" else if [ "$CFG_QGTKSTYLE" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Gtk theme support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the fin al report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_QGTKSTYLE=no fi fi elif [ "$CFG_GLIB" = "no" ]; then CFG_QGTKSTYLE=no fi # ### Vestige if [ "$CFG_GLIB" = "yes" -a "$CFG_GSTREAMER" != "no" ]; then if [ -n "$PKG_CONFIG" ]; then QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null` QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null` fi if compileTest unix/gstreamer "GStreamer" $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER; then CFG_GSTREAMER=yes QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER" QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER" else if [ "$CFG_GSTREAMER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Gstreamer support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_GSTREAMER=no fi fi elif [ "$CFG_GLIB" = "no" ]; then CFG_GSTREAMER=no fi # auto-detect libicu support if [ "$CFG_ICU" != "no" ]; then if compileTest unix/icu "ICU"; then [ "$CFG_ICU" = "auto" ] && CFG_ICU=yes else if [ "$CFG_ICU" = "auto" ]; then CFG_ICU=no elif [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then # CFG_ICU is "yes" echo "The ICU library support cannot be enabled." echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 fi fi fi # Auto-detect PulseAudio support if [ "$CFG_PULSEAUDIO" != "no" ]; then if [ -n "$PKG_CONFIG" ]; then QT_CFLAGS_PULSEAUDIO=`$PKG_CONFIG --cflags libpulse '>=' 0.9.10 libpulse-mainloop-glib 2>/dev/null` QT_LIBS_PULSEAUDIO=`$PKG_CONFIG --libs libpulse '>=' 0.9.10 libpulse-mainloop-glib 2>/dev/null` fi if compileTest unix/pulseaudio "PulseAudio" $QT_CFLAGS_PULSEAUDIO $QT_LIBS_PULSEAUDIO; then CFG_PULSEAUDIO=yes QMakeVar set QT_CFLAGS_PULSEAUDIO "$QT_CFLAGS_PULSEAUDIO" QMakeVar set QT_LIBS_PULSEAUDIO "$QT_LIBS_PULSEAUDIO" else if [ "$CFG_PULSEAUDIO" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "PulseAudio support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_PULSEAUDIO=no fi fi fi # X11/MINGW OpenGL if [ "$XPLATFORM_MINGW" = "yes" ]; then # auto-detect OpenGL support (es2 = OpenGL ES 2.x) if [ "$CFG_GUI" = "no" ]; then if [ "$CFG_OPENGL" = "auto" ]; then CFG_OPENGL=no fi if [ "$CFG_OPENGL" != "no" ]; then echo "OpenGL enabled, but GUI disabled." echo " You might need to either enable the GUI or disable OpenGL" exit 1 fi fi if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then if compileTest x11/opengl "OpenGL"; then CFG_OPENGL=desktop elif compileTest unix/opengles2 "OpenGL ES 2.x"; then CFG_OPENGL=es2 else if [ "$CFG_OPENGL" = "yes" ]; then echo "All the OpenGL functionality tests failed!" echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in" echo " ${XQMAKESPEC}." exit 1 fi CFG_OPENGL=no fi case "$PLATFORM" in hpux*) # HP-UX have buggy glx headers; check if we really need to define the GLXFBConfig struct. if [ "$CFG_OPENGL" = "desktop" ]; then compileTest x11/glxfbconfig "OpenGL" if [ $? != "0" ]; then QMakeVar add DEFINES QT_DEFINE_GLXFBCONFIG_STRUCT fi fi ;; *) ;; esac elif [ "$CFG_OPENGL" = "es2" ]; then #OpenGL ES 2.x compileTest unix/opengles2 "OpenGL ES 2.x" if [ $? != "0" ]; then echo "The OpenGL ES 2.0 functionality test failed!" echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_OPENGL_ES2, QMAKE_LIBDIR_OPENGL_ES2 and QMAKE_LIBS_OPENGL_ES2 in" echo " ${XQMAKESPEC}." exit 1 fi elif [ "$CFG_OPENGL" = "desktop" ]; then # Desktop OpenGL support compileTest x11/opengl "OpenGL" if [ $? != "0" ]; then echo "The OpenGL functionality test failed!" echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in" echo " ${XQMAKESPEC}." exit 1 fi case "$PLATFORM" in hpux*) # HP-UX have buggy glx headers; check if we really need to define the GLXFBConfig struct. compileTest x11/glxfbconfig "OpenGL" if [ $? != "0" ]; then QMakeVar add DEFINES QT_DEFINE_GLXFBCONFIG_STRUCT fi ;; *) ;; esac fi fi # X11/MINGW OpenGL if [ "$BUILD_ON_MAC" = "yes" ]; then if [ "$CFG_COREWLAN" = "auto" ]; then if compileTest mac/corewlan "CoreWlan"; then CFG_COREWLAN=yes else CFG_COREWLAN=no fi fi fi # auto-detect OpenGL support (es2 = OpenGL ES 2.x) if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then if compileTest unix/opengldesktop "OpenGL"; then CFG_OPENGL=desktop elif compileTest unix/opengles2 "OpenGL ES 2.x"; then CFG_OPENGL=es2 else if [ "$CFG_OPENGL" = "yes" ]; then echo "All the OpenGL functionality tests failed!" echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in" echo " ${XQMAKESPEC}." exit 1 fi CFG_OPENGL=no fi elif [ "$CFG_OPENGL" = "es2" ]; then #OpenGL ES 2.x if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists glesv2 2>/dev/null; then QMAKE_INCDIR_OPENGL_ES2=`$PKG_CONFIG --cflags-only-I glesv2 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'` QMAKE_LIBDIR_OPENGL_ES2=`$PKG_CONFIG --libs-only-L glesv2 2>/dev/null | sed -e 's,^-L,,g' -e 's, -L, ,g'` QMAKE_LIBS_OPENGL_ES2=`$PKG_CONFIG --libs glesv2 2>/dev/null` QMAKE_CFLAGS_OPENGL_ES2=`$PKG_CONFIG --cflags glesv2 2>/dev/null` QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_INCDIR_OPENGL_ES2"`" QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_LIBDIR_OPENGL_ES2"`" QMakeVar set QMAKE_LIBS_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_LIBS_OPENGL_ES2"`" fi compileTest unix/opengles2 "OpenGL ES 2.x" $QMAKE_LIBS_OPENGL_ES2 $QMAKE_CFLAGS_OPENGL_ES2 if [ $? != "0" ]; then echo "The OpenGL ES 2.0 functionality test failed!" echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_OPENGL_ES2, QMAKE_LIBDIR_OPENGL_ES2 and QMAKE_LIBS_OPENGL_ES2 in" echo " ${XQMAKESPEC}." exit 1 fi elif [ "$CFG_OPENGL" = "desktop" ]; then # Desktop OpenGL support compileTest unix/opengldesktop "OpenGL" if [ $? != "0" ]; then echo "The OpenGL functionality test failed!" echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in" echo " ${XQMAKESPEC}." exit 1 fi fi # auto-detect FontConfig support if [ "$CFG_FONTCONFIG" != "no" ]; then if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists fontconfig --exists freetype2 2>/dev/null; then QT_CFLAGS_FONTCONFIG=`$PKG_CONFIG --cflags fontconfig --cflags freetype2 2>/dev/null` QT_LIBS_FONTCONFIG=`$PKG_CONFIG --libs fontconfig --libs freetype2 2>/dev/null` else QT_CFLAGS_FONTCONFIG= QT_LIBS_FONTCONFIG="-lfreetype -lfontconfig" fi if compileTest unix/fontconfig "FontConfig" $QT_CFLAGS_FONTCONFIG $QT_LIBS_FONTCONFIG; then QT_CONFIG="$QT_CONFIG fontconfig" QMakeVar set QMAKE_CFLAGS_FONTCONFIG "$QT_CFLAGS_FONTCONFIG" QMakeVar set QMAKE_LIBS_FONTCONFIG "$QT_LIBS_FONTCONFIG" CFG_FONTCONFIG=yes CFG_LIBFREETYPE=system else CFG_FONTCONFIG=no fi fi # Save these for a check later ORIG_CFG_XCB="$CFG_XCB" ORIG_CFG_EGLFS="$CFG_EGLFS" ORIG_CFG_DIRECTFB="$CFG_DIRECTFB" ORIG_CFG_LINUXFB="$CFG_LINUXFB" ORIG_CFG_KMS="$CFG_KMS" if [ "$CFG_LIBUDEV" != "no" ]; then if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists libudev 2>/dev/null; then QMAKE_INCDIR_LIBUDEV=`$PKG_CONFIG --cflags-only-I libudev 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'` QMAKE_LIBS_LIBUDEV=`$PKG_CONFIG --libs libudev 2>/dev/null` QMakeVar set QMAKE_INCDIR_LIBUDEV "$QMAKE_INCDIR_LIBUDEV" QMakeVar set QMAKE_LIBS_LIBUDEV "$QMAKE_LIBS_LIBUDEV" fi if compileTest unix/libudev "libudev" $QMAKE_INCDIR_LIBUDEV $QMAKE_LIBS_LIBUDEV; then CFG_LIBUDEV=yes QT_CONFIG="$QT_CONFIG libudev" elif [ "$CFG_LIBUDEV" = "yes" ]; then echo "The libudev functionality test failed!" exit 1 else CFG_LIBUDEV=no fi fi if [ "$CFG_LIBUDEV" = "no" ]; then QMakeVar add DEFINES QT_NO_LIBUDEV fi if [ "$CFG_EVDEV" != "no" ]; then if compileTest unix/evdev "evdev"; then CFG_EVDEV=yes QT_CONFIG="$QT_CONFIG evdev" elif [ "$CFG_EVDEV" = "yes" ]; then echo "The evdev functionality test failed!" exit 1 else CFG_EVDEV=no fi fi if [ "$CFG_EVDEV" = "no" ]; then QMakeVar add DEFINES QT_NO_EVDEV fi # Check we actually have X11 :-) if compileTest x11/xlib "XLib"; then QT_CONFIG="$QT_CONFIG xlib" fi # auto-detect Xrender support if [ "$CFG_XRENDER" != "no" ]; then if compileTest x11/xrender "Xrender"; then CFG_XRENDER=yes QT_CONFIG="$QT_CONFIG xrender" else if [ "$CFG_XRENDER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "Xrender support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_XRENDER=no fi fi fi if [ "$CFG_XCB" != "no" ]; then if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists "xcb >= 1.5" 2>/dev/null; then QMAKE_CFLAGS_XCB="`$PKG_CONFIG --cflags xcb 2>/dev/null`" QMAKE_LIBS_XCB="`$PKG_CONFIG --libs xcb 2>/dev/null`" fi if compileTest qpa/xcb "xcb" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then if [ "$CFG_XCB" = "qt" ]; then QT_CONFIG="$QT_CONFIG xcb-qt" else CFG_XCB="system" if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists "xcb >= 1.5" 2>/dev/null; then XCB_PACKAGES="xcb xcb-shm xcb-sync xcb-xfixes xcb-randr xcb-image xcb-keysyms xcb-icccm" QMAKE_CFLAGS_XCB="`$PKG_CONFIG --cflags $XCB_PACKAGES 2>/dev/null`" QMAKE_LIBS_XCB="`$PKG_CONFIG --libs $XCB_PACKAGES 2>/dev/null`" fi if compileTest qpa/xcb-syslibs "xcb-syslibs" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then if compileTest qpa/xcb-render "xcb-render" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then QT_CONFIG="$QT_CONFIG xcb-render" fi if compileTest qpa/xcb-glx "xcb-glx" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then CFG_XCB_GLX=yes QT_CONFIG="$QT_CONFIG xcb-glx" fi else echo "The test for linking against libxcb and support libraries failed!" echo " You might need install dependency packages, or pass -qt-xcb." echo " See src/plugins/platforms/xcb/README." exit 1 fi fi if compileTest qpa/xcb-xlib "xcb-xlib" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then QT_CONFIG="$QT_CONFIG xcb-xlib" fi # auto-detect XInput2 support. Needed by xcb too. if [ "$CFG_XINPUT2" != "no" ]; then if compileTest x11/xinput2 "XInput2"; then CFG_XINPUT2=yes CFG_XINPUT=no else if [ "$CFG_XINPUT2" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "XInput2 support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_XINPUT2=no fi fi fi else if [ "$CFG_XCB" != "auto" ]; then echo "The test for linking against libxcb failed!" echo " You might need to install dependency packages for libxcb." echo " See src/plugins/platforms/xcb/README." exit 1 fi CFG_XCB=no fi fi if [ "$CFG_XCB" = "no" ]; then QMakeVar add DEFINES QT_NO_XCB fi if [ "$CFG_DIRECTFB" != "no" ]; then if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists directfb 2>/dev/null; then QMAKE_CFLAGS_DIRECTFB=`$PKG_CONFIG --cflags directfb 2>/dev/null` QMAKE_LIBS_DIRECTFB=`$PKG_CONFIG --libs directfb 2>/dev/null` if compileTest qpa/directfb "DirectFB" $QMAKE_CFLAGS_DIRECTFB $QMAKE_LIBS_DIRECTFB; then CFG_DIRECTFB=yes elif [ "$CFG_DIRECTFB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo " DirectFB support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_DIRECTFB=no fi else CFG_DIRECTFB=no fi fi if [ "$CFG_LINUXFB" != "no" ]; then if compileTest qpa/linuxfb "LinuxFB"; then CFG_LINUXFB=yes elif [ "$CFG_LINUXFB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo " Linux Framebuffer support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_LINUXFB=no fi fi if [ "$CFG_KMS" != "no" ]; then if compileTest qpa/kms "KMS"; then CFG_KMS=yes elif [ "$CFG_KMS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo " KMS support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_KMS=no fi fi # Detect libxkbcommon if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists xkbcommon 2>/dev/null; then QMAKE_CFLAGS_XKBCOMMON="`$PKG_CONFIG --cflags xkbcommon 2>/dev/null`" QMAKE_LIBS_XKBCOMMON="`$PKG_CONFIG --libs xkbcommon 2>/dev/null`" QMAKE_CFLAGS_XCB="$QMAKE_CFLAGS_XCB $QMAKE_CFLAGS_XKBCOMMON" QMAKE_LIBS_XCB="$QMAKE_LIBS_XCB $QMAKE_LIBS_XKBCOMMON" else QMAKE_DEFINES_XCB=QT_NO_XCB_XKB fi # EGL Support if [ "$CFG_EGL" != "no" ]; then if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists egl 2>/dev/null; then QMAKE_INCDIR_EGL=`$PKG_CONFIG --cflags-only-I egl 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'` QMAKE_LIBS_EGL=`$PKG_CONFIG --libs egl 2>/dev/null` QMAKE_CFLAGS_EGL=`$PKG_CONFIG --cflags egl 2>/dev/null` QMakeVar set QMAKE_INCDIR_EGL "$QMAKE_INCDIR_EGL" QMakeVar set QMAKE_LIBS_EGL "$QMAKE_LIBS_EGL" fi # detect EGL support if compileTest qpa/egl "EGL" $QMAKE_CFLAGS_EGL $QMAKE_LIBS_EGL; then CFG_EGL=yes elif [ "$CFG_EGL" = "yes" ]; then echo " The EGL functionality test failed; EGL is required by some QPA plugins to manage contexts & surfaces." echo " You might need to modify the include and library search paths by editing" echo " QMAKE_INCDIR_EGL, QMAKE_LIBDIR_EGL and QMAKE_LIBS_EGL in ${XQMAKESPEC}." exit 1 else CFG_EGL=no fi elif [ "$CFG_OPENGL" = "desktop" ]; then if [ "$CFG_EGL" = "yes" ]; then echo "EGL support was requested but Qt is being configured for desktop OpenGL." echo "Either disable EGL support or enable OpenGL ES support." exit 101 fi CFG_EGL=no fi if [ "$CFG_EGLFS" != "no" ]; then if [ "$CFG_OPENGL" = "es2" ] && [ "$CFG_EVDEV" = "yes" ]; then CFG_EGLFS="$CFG_EGL" else CFG_EGLFS="no" fi fi if [ "$CFG_KMS" = "yes" ]; then if [ "$CFG_OPENGL" = "es2" ] && [ "$CFG_EGL" = "yes" ]; then CFG_KMS="yes" else CFG_KMS="no" fi fi # Detect accessibility support if [ "$CFG_ACCESSIBILITY" = "no" ]; then echo >&2 "Warning: Disabling Accessibility. This version of Qt is unsupported." else CFG_ACCESSIBILITY=yes # linux/xcb accessibility bridge needs dbus if [ "$CFG_XCB" != "no" ]; then if [ "$CFG_DBUS" != "no" ]; then CFG_ACCESSIBILITY_ATSPI_BRIDGE=yes QT_CONFIG="$QT_CONFIG accessibility-atspi-bridge" else echo >&2 "Warning: Disabling Linux Accessibility Bridge: DBus is missing." QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ACCESSIBILITY_ATSPI_BRIDGE" fi fi fi # Determine the default QPA platform if [ -z "$QT_QPA_DEFAULT_PLATFORM" ]; then # check the mkspec QT_QPA_DEFAULT_PLATFORM=`getXQMakeConf QT_QPA_DEFAULT_PLATFORM` if [ -z "$QT_QPA_DEFAULT_PLATFORM" ]; then if [ "$XPLATFORM_MINGW" = "yes" ]; then QT_QPA_DEFAULT_PLATFORM="windows" elif [ "$BUILD_ON_MAC" = "yes" ]; then QT_QPA_DEFAULT_PLATFORM="cocoa" elif [ "$UNAME_SYSTEM" = "QNX" ]; then QT_QPA_DEFAULT_PLATFORM="qnx" else QT_QPA_DEFAULT_PLATFORM="xcb" fi fi fi if [ -n "$QMAKE_CFLAGS_XCB" ] || [ -n "$QMAKE_LIBS_XCB" ]; then QMakeVar set QMAKE_CFLAGS_XCB "$QMAKE_CFLAGS_XCB" QMakeVar set QMAKE_LIBS_XCB "$QMAKE_LIBS_XCB" QMakeVar set QMAKE_DEFINES_XCB "$QMAKE_DEFINES_XCB" fi if [ "$CFG_DIRECTFB" = "yes" ]; then QT_CONFIG="$QT_CONFIG directfb" QMakeVar set QMAKE_CFLAGS_DIRECTFB "$QMAKE_CFLAGS_DIRECTFB" QMakeVar set QMAKE_LIBS_DIRECTFB "$QMAKE_LIBS_DIRECTFB" fi if [ "$CFG_LINUXFB" = "yes" ]; then QT_CONFIG="$QT_CONFIG linuxfb" fi if [ "$CFG_KMS" = "yes" ]; then QT_CONFIG="$QT_CONFIG kms" fi if [ "$BUILD_ON_MAC" = "yes" ]; then if compileTest mac/coreservices "CoreServices"; then QT_CONFIG="$QT_CONFIG coreservices" else QMakeVar add DEFINES QT_NO_CORESERVICES fi fi if [ "$BUILD_ON_MAC" = "no" ] && [ "$XPLATFORM_MINGW" = "no" ] && [ "$XPLATFORM_QNX" = "no" ]; then if [ "$CFG_XCB" = "no" ] && [ "$CFG_EGLFS" = "no" ] && [ "$CFG_DIRECTFB" = "no" ] && [ "$CFG_LINUXFB" = "no" ] && [ "$CFG_KMS" = "no" ]; then if [ "$QPA_PLATFORM_GUARD" = "yes" ] && ( [ "$ORIG_CFG_XCB" = "auto" ] || [ "$ORIG_CFG_EGLFS" = "auto" ] || [ "$ORIG_CFG_DIRECTFB" = "auto" ] || [ "$ORIG_CFG_LINUXFB" = "auto" ] || [ "$ORIG_CFG_KMS" = "auto" ] ); then echo "No QPA platform plugin enabled!" echo " If you really want to build without a QPA platform plugin you must pass" echo " -no-qpa-platform-guard to configure. Doing this will" echo " produce a Qt that can not run GUI applications." echo " The dependencies needed for xcb to build are listed in" echo " src/plugins/platforms/xcb/README" exit 1 fi fi fi # freetype support [ "$XPLATFORM_MINGW" = "yes" ] && [ "$CFG_LIBFREETYPE" = "auto" ] && CFG_LIBFREETYPE=no if [ "$CFG_LIBFREETYPE" = "auto" ]; then if compileTest unix/freetype "FreeType"; then CFG_LIBFREETYPE=system else CFG_LIBFREETYPE=yes fi fi if ! compileTest unix/stl "STL" && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "STL functionality check failed! Cannot build Qt with this STL library." echo " Turn on verbose messaging (-v) to $0 to see the final report." exit 101 fi # detect POSIX clock_gettime() if [ "$CFG_CLOCK_GETTIME" = "auto" ]; then if compileTest unix/clock-gettime "POSIX clock_gettime()"; then CFG_CLOCK_GETTIME=yes else CFG_CLOCK_GETTIME=no fi fi # detect POSIX monotonic clocks if [ "$CFG_CLOCK_GETTIME" = "yes" ] && [ "$CFG_CLOCK_MONOTONIC" = "auto" ]; then if compileTest unix/clock-monotonic "POSIX Monotonic Clock"; then CFG_CLOCK_MONOTONIC=yes else CFG_CLOCK_MONOTONIC=no fi elif [ "$CFG_CLOCK_GETTIME" = "no" ]; then CFG_CLOCK_MONOTONIC=no fi # detect mremap if [ "$CFG_MREMAP" = "auto" ]; then if compileTest unix/mremap "mremap"; then CFG_MREMAP=yes else CFG_MREMAP=no fi fi # find if the platform provides getaddrinfo (ipv6 dns lookups) if [ "$CFG_GETADDRINFO" != "no" ]; then if compileTest unix/getaddrinfo "getaddrinfo"; then CFG_GETADDRINFO=yes else if [ "$CFG_GETADDRINFO" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "getaddrinfo support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_GETADDRINFO=no fi fi fi # find if the platform provides inotify if [ "$CFG_INOTIFY" != "no" ]; then if compileTest unix/inotify "inotify"; then CFG_INOTIFY=yes else if [ "$CFG_INOTIFY" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "inotify support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_INOTIFY=no fi fi fi # find if the platform provides eventfd if [ "$CFG_EVENTFD" != "no" ]; then if compileTest unix/eventfd "eventfd"; then CFG_EVENTFD=yes else if [ "$CFG_EVENTFD" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "eventfd support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_EVENTFD=no fi fi fi # find if the platform provides if_nametoindex (ipv6 interface name support) if [ "$CFG_IPV6IFNAME" != "no" ]; then if compileTest unix/ipv6ifname "IPv6 interface name"; then CFG_IPV6IFNAME=yes else if [ "$CFG_IPV6IFNAME" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "IPv6 interface name support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_IPV6IFNAME=no fi fi fi # find if the platform provides getifaddrs (network interface enumeration) if [ "$CFG_GETIFADDRS" != "no" ]; then if compileTest unix/getifaddrs "getifaddrs"; then CFG_GETIFADDRS=yes else if [ "$CFG_GETIFADDRS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "getifaddrs support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_GETIFADDRS=no fi fi fi # detect OpenSSL if [ "$CFG_OPENSSL" != "no" ]; then if compileTest unix/openssl "OpenSSL"; then if [ "$CFG_OPENSSL" = "auto" ]; then CFG_OPENSSL=yes fi else if ( [ "$CFG_OPENSSL" = "yes" ] || [ "$CFG_OPENSSL" = "linked" ] ) && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "OpenSSL support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_OPENSSL=no fi fi fi # detect PCRE if [ "$CFG_PCRE" != "qt" ]; then if compileTest unix/pcre "PCRE"; then CFG_PCRE=system else if [ "$CFG_PCRE" = "system" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "PCRE support cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_PCRE=qt fi fi fi # detect OpenVG support if [ "$CFG_OPENVG" != "no" ]; then if compileTest unix/openvg "OpenVG"; then if [ "$CFG_OPENVG" = "auto" ]; then CFG_OPENVG=yes fi elif compileTest unix/openvg "OpenVG" -config openvg_on_opengl; then if [ "$CFG_OPENVG" = "auto" ]; then CFG_OPENVG=yes fi CFG_OPENVG_ON_OPENGL=yes elif compileTest unix/openvg "OpenVG (lc includes)" -config lower_case_includes; then if [ "$CFG_OPENVG" = "auto" ]; then CFG_OPENVG=yes fi CFG_OPENVG_LC_INCLUDES=yes elif compileTest unix/openvg "OpenVG (lc includes)" -config "openvg_on_opengl lower_case_includes"; then if [ "$CFG_OPENVG" = "auto" ]; then CFG_OPENVG=yes fi CFG_OPENVG_LC_INCLUDES=yes CFG_OPENVG_ON_OPENGL=yes else if [ "$CFG_OPENVG" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then echo "$CFG_OPENVG was specified for OpenVG but cannot be enabled due to functionality tests!" echo " Turn on verbose messaging (-v) to $0 to see the final report." echo " If you believe this message is in error you may use the continue" echo " switch (-continue) to $0 to continue." exit 101 else CFG_OPENVG=no fi fi if [ "$CFG_OPENVG" = "yes" ] && compileTest unix/shivavg "ShivaVG"; then CFG_OPENVG_SHIVA=yes fi fi if [ "$CFG_ALSA" = "auto" ]; then if compileTest unix/alsa "alsa"; then CFG_ALSA=yes else CFG_ALSA=no fi fi if [ "$CFG_JAVASCRIPTCORE_JIT" = "yes" ] || [ "$CFG_JAVASCRIPTCORE_JIT" = "auto" ]; then if [ "$CFG_ARCH" = "arm" ]; then compileTest unix/javascriptcore-jit "javascriptcore-jit" if [ $? != "0" ]; then CFG_JAVASCRIPTCORE_JIT=no fi else case "$XPLATFORM" in linux-icc*) CFG_JAVASCRIPTCORE_JIT=no ;; esac fi fi if [ "$CFG_JAVASCRIPTCORE_JIT" = "yes" ]; then QMakeVar set JAVASCRIPTCORE_JIT yes elif [ "$CFG_JAVASCRIPTCORE_JIT" = "no" ]; then QMakeVar set JAVASCRIPTCORE_JIT no fi if [ "$CFG_AUDIO_BACKEND" = "auto" ]; then CFG_AUDIO_BACKEND=yes fi if [ "$CFG_LARGEFILE" != "yes" ] && [ "$XPLATFORM_MINGW" = "yes" ]; then echo "Warning: largefile support cannot be disabled for win32." CFG_LARGEFILE="yes" fi #------------------------------------------------------------------------------- # ask for all that hasn't been auto-detected or specified in the arguments #------------------------------------------------------------------------------- [ "$CFG_CXX11" = "yes" ] && QT_CONFIG="$QT_CONFIG c++11" # disable accessibility if [ "$CFG_ACCESSIBILITY" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ACCESSIBILITY" else QT_CONFIG="$QT_CONFIG accessibility" fi # enable egl if [ "$CFG_EGL" = "yes" ]; then QT_CONFIG="$QT_CONFIG egl" else QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_EGL" fi # enable eglfs if [ "$CFG_EGLFS" = "yes" ]; then QT_CONFIG="$QT_CONFIG eglfs" else QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_EGLFS" fi # enable openvg if [ "$CFG_OPENVG" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_OPENVG" else QT_CONFIG="$QT_CONFIG openvg" if [ "$CFG_OPENVG_LC_INCLUDES" = "yes" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_LOWER_CASE_VG_INCLUDES" fi if [ "$CFG_OPENVG_ON_OPENGL" = "yes" ]; then QT_CONFIG="$QT_CONFIG openvg_on_opengl" fi if [ "$CFG_OPENVG_SHIVA" = "yes" ]; then QT_CONFIG="$QT_CONFIG shivavg" QCONFIG_FLAGS="$QCONFIG_FLAGS QT_SHIVAVG" fi fi # enable opengl if [ "$CFG_OPENGL" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_OPENGL" else QT_CONFIG="$QT_CONFIG opengl" fi if [ "$CFG_OPENGL" = "es2" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_OPENGL_ES" fi if [ "$CFG_OPENGL" = "es2" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_OPENGL_ES_2" QT_CONFIG="$QT_CONFIG opengles2" fi # build up the variables for output if [ "$CFG_DEBUG" = "yes" ]; then QMAKE_OUTDIR="${QMAKE_OUTDIR}debug" elif [ "$CFG_DEBUG" = "no" ]; then QMAKE_OUTDIR="${QMAKE_OUTDIR}release" fi if [ "$CFG_SHARED" = "yes" ]; then QMAKE_OUTDIR="${QMAKE_OUTDIR}-shared" QT_CONFIG="$QT_CONFIG shared" QTCONFIG_CONFIG="$QTCONFIG_CONFIG shared" elif [ "$CFG_SHARED" = "no" ]; then QMAKE_OUTDIR="${QMAKE_OUTDIR}-static" QT_CONFIG="$QT_CONFIG static" QTCONFIG_CONFIG="$QTCONFIG_CONFIG static" fi #FIXME: qpa is implicit this should all be removed QMAKE_CONFIG="$QMAKE_CONFIG qpa" QT_CONFIG="$QT_CONFIG qpa" QTCONFIG_CONFIG="$QTCONFIG_CONFIG qpa" if [ "$XPLATFORM_MINGW" != "yes" ]; then # Do not set this here for Windows. Let qmake do it so # debug and release precompiled headers are kept separate. QMakeVar set PRECOMPILED_DIR ".pch/$QMAKE_OUTDIR" fi QMakeVar set OBJECTS_DIR ".obj/$QMAKE_OUTDIR" QMakeVar set MOC_DIR ".moc/$QMAKE_OUTDIR" QMakeVar set RCC_DIR ".rcc/$QMAKE_OUTDIR" QMakeVar set UI_DIR ".uic/$QMAKE_OUTDIR" if [ "$CFG_LARGEFILE" = "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ]; then QMAKE_CONFIG="$QMAKE_CONFIG largefile" fi if [ "$CFG_USE_GNUMAKE" = "yes" ]; then QMAKE_CONFIG="$QMAKE_CONFIG GNUmake" fi [ "$CFG_REDUCE_EXPORTS" = "yes" ] && QT_CONFIG="$QT_CONFIG reduce_exports" [ "$CFG_STACK_PROTECTOR_STRONG" = "yes" ] && QT_CONFIG="$QT_CONFIG stack-protector-strong" [ "$CFG_REDUCE_RELOCATIONS" = "yes" ] && QT_CONFIG="$QT_CONFIG reduce_relocations" [ "$CFG_STRIP" = "no" ] && QMAKE_CONFIG="$QMAKE_CONFIG nostrip" [ "$CFG_PRECOMPILE" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG precompile_header" if [ "$CFG_SEPARATE_DEBUG_INFO" = "yes" ]; then QMakeVar add QMAKE_CFLAGS -g QMakeVar add QMAKE_CXXFLAGS -g QT_CONFIG="$QT_CONFIG separate_debug_info" fi if [ "$CFG_SEPARATE_DEBUG_INFO_NOCOPY" = "yes" ] ; then QT_CONFIG="$QT_CONFIG separate_debug_info_nocopy" fi [ "$CFG_SSE2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse2" [ "$CFG_SSE3" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse3" [ "$CFG_SSSE3" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG ssse3" [ "$CFG_SSE4_1" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse4_1" [ "$CFG_SSE4_2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse4_2" [ "$CFG_AVX" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG avx" [ "$CFG_AVX2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG avx2" [ "$CFG_IWMMXT" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG iwmmxt" [ "$CFG_NEON" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG neon" if [ "$CFG_ARCH" = "mips" ]; then [ "$CFG_MIPS_DSP" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG mips_dsp" [ "$CFG_MIPS_DSPR2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG mips_dspr2" fi if [ "$CFG_CLOCK_GETTIME" = "yes" ]; then QT_CONFIG="$QT_CONFIG clock-gettime" fi if [ "$CFG_CLOCK_MONOTONIC" = "yes" ]; then QT_CONFIG="$QT_CONFIG clock-monotonic" fi if [ "$CFG_MREMAP" = "yes" ]; then QT_CONFIG="$QT_CONFIG mremap" fi if [ "$CFG_GETADDRINFO" = "yes" ]; then QT_CONFIG="$QT_CONFIG getaddrinfo" fi if [ "$CFG_IPV6IFNAME" = "yes" ]; then QT_CONFIG="$QT_CONFIG ipv6ifname" fi if [ "$CFG_GETIFADDRS" = "yes" ]; then QT_CONFIG="$QT_CONFIG getifaddrs" fi if [ "$CFG_INOTIFY" = "yes" ]; then QT_CONFIG="$QT_CONFIG inotify" fi if [ "$CFG_EVENTFD" = "yes" ]; then QT_CONFIG="$QT_CONFIG eventfd" fi if [ "$CFG_LIBJPEG" = "no" ]; then CFG_JPEG="no" elif [ "$CFG_LIBJPEG" = "system" ]; then QT_CONFIG="$QT_CONFIG system-jpeg" fi if [ "$CFG_JPEG" = "no" ]; then QT_CONFIG="$QT_CONFIG no-jpeg" elif [ "$CFG_JPEG" = "yes" ]; then QT_CONFIG="$QT_CONFIG jpeg" fi if [ "$CFG_LIBPNG" = "no" ]; then CFG_PNG="no" fi if [ "$CFG_LIBPNG" = "system" ]; then QT_CONFIG="$QT_CONFIG system-png" fi if [ "$CFG_PNG" = "no" ]; then QT_CONFIG="$QT_CONFIG no-png" elif [ "$CFG_PNG" = "yes" ]; then QT_CONFIG="$QT_CONFIG png" fi if [ "$CFG_GIF" = "no" ]; then QT_CONFIG="$QT_CONFIG no-gif" elif [ "$CFG_GIF" = "yes" ]; then QT_CONFIG="$QT_CONFIG gif" fi if [ "$CFG_LIBFREETYPE" = "no" ]; then QT_CONFIG="$QT_CONFIG no-freetype" QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_FREETYPE" elif [ "$CFG_LIBFREETYPE" = "system" ]; then QT_CONFIG="$QT_CONFIG system-freetype" else QT_CONFIG="$QT_CONFIG freetype" fi if [ "$CFG_GUI" = "auto" ]; then CFG_GUI="yes" fi if [ "$CFG_GUI" = "no" ]; then QT_CONFIG="$QT_CONFIG no-gui" CFG_WIDGETS="no" fi if [ "$CFG_WIDGETS" = "no" ]; then QT_CONFIG="$QT_CONFIG no-widgets" QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_WIDGETS" fi if [ "x$BUILD_ON_MAC" = "xyes" ] && [ "$XPLATFORM_MINGW" != "yes" ]; then #On Mac we implicitly link against libz, so we #never use the 3rdparty stuff. [ "$CFG_ZLIB" = "yes" ] && CFG_ZLIB="system" fi if [ "$CFG_ZLIB" = "yes" ]; then QT_CONFIG="$QT_CONFIG zlib" elif [ "$CFG_ZLIB" = "system" ]; then QT_CONFIG="$QT_CONFIG system-zlib" fi [ "$CFG_NIS" = "yes" ] && QT_CONFIG="$QT_CONFIG nis" [ "$CFG_CUPS" = "yes" ] && QT_CONFIG="$QT_CONFIG cups" [ "$CFG_ICONV" = "yes" ] && QT_CONFIG="$QT_CONFIG iconv" [ "$CFG_ICONV" = "sun" ] && QT_CONFIG="$QT_CONFIG sun-libiconv" [ "$CFG_ICONV" = "gnu" ] && QT_CONFIG="$QT_CONFIG gnu-libiconv" [ "$CFG_GLIB" = "yes" ] && QT_CONFIG="$QT_CONFIG glib" [ "$CFG_GSTREAMER" = "yes" ] && QT_CONFIG="$QT_CONFIG gstreamer" [ "$CFG_DBUS" = "yes" ] && QT_CONFIG="$QT_CONFIG dbus" [ "$CFG_DBUS" = "linked" ] && QT_CONFIG="$QT_CONFIG dbus dbus-linked" [ "$CFG_OPENSSL" = "yes" ] && QT_CONFIG="$QT_CONFIG openssl" [ "$CFG_OPENSSL" = "linked" ] && QT_CONFIG="$QT_CONFIG openssl-linked" [ "$CFG_MAC_HARFBUZZ" = "yes" ] && QT_CONFIG="$QT_CONFIG harfbuzz" [ "$CFG_XCB" != "no" ] && QT_CONFIG="$QT_CONFIG xcb" [ "$CFG_XINPUT2" = "yes" ] && QT_CONFIG="$QT_CONFIG xinput2" [ "$CFG_SYSTEM_PROXIES" = "yes" ] && QT_CONFIG="$QT_CONFIG system-proxies" [ "$CFG_DIRECTWRITE" = "yes" ] && QT_CONFIG="$QT_CONFIG directwrite" [ '!' -z "$DEFINES" ] && QMakeVar add DEFINES "$DEFINES" [ '!' -z "$L_FLAGS" ] && QMakeVar add LIBS "$L_FLAGS" if [ "$PLATFORM_MAC" = "yes" ] && [ "$QT_CROSS_COMPILE" = "no" ]; then if [ "$CFG_RPATH" = "yes" ]; then QMAKE_CONFIG="$QMAKE_CONFIG absolute_library_soname" fi elif [ -z "`getXQMakeConf 'QMAKE_(LFLAGS_)?RPATH'`" ]; then if [ -n "$RPATH_FLAGS" ]; then echo echo "ERROR: -R cannot be used on this platform as \$QMAKE_LFLAGS_RPATH is" echo " undefined." echo exit 1 elif [ "$CFG_RPATH" = "yes" ]; then RPATH_MESSAGE=" NOTE: This platform does not support runtime library paths, using -no-rpath." CFG_RPATH=no fi else if [ -n "$RPATH_FLAGS" ]; then # add the user defined rpaths QMakeVar add QMAKE_RPATHDIR "$RPATH_FLAGS" fi fi if [ "$CFG_RPATH" = "yes" ]; then QT_CONFIG="$QT_CONFIG rpath" fi if [ '!' -z "$I_FLAGS" ]; then # add the user define include paths QMakeVar add QMAKE_CFLAGS "$I_FLAGS" QMakeVar add QMAKE_CXXFLAGS "$I_FLAGS" fi if [ '!' -z "$W_FLAGS" ]; then # add the user defined warning flags QMakeVar add QMAKE_CFLAGS_WARN_ON "$W_FLAGS" QMakeVar add QMAKE_CXXFLAGS_WARN_ON "$W_FLAGS" QMakeVar add QMAKE_OBJECTIVE_CFLAGS_WARN_ON "$W_FLAGS" fi if [ "$XPLATFORM_MINGW" = "yes" ]; then # mkspecs/features/win32/default_pre.prf sets "no-rtti". # Follow default behavior of configure.exe by overriding with "rtti". QTCONFIG_CONFIG="$QTCONFIG_CONFIG rtti" fi if [ "$CFG_ALSA" = "yes" ]; then QT_CONFIG="$QT_CONFIG alsa" fi if [ "$CFG_PULSEAUDIO" = "yes" ]; then QT_CONFIG="$QT_CONFIG pulseaudio" fi if [ "$CFG_COREWLAN" = "yes" ]; then QT_CONFIG="$QT_CONFIG corewlan" fi if [ "$CFG_ICU" = "yes" ]; then QT_CONFIG="$QT_CONFIG icu" fi if [ "$CFG_FORCE_ASSERTS" = "yes" ]; then QT_CONFIG="$QT_CONFIG force_asserts" fi if [ "$CFG_PCRE" = "qt" ]; then QMAKE_CONFIG="$QMAKE_CONFIG pcre" fi # # Some Qt modules are too advanced in C++ for some old compilers # Detect here the platforms where they are known to work. # # See Qt documentation for more information on which features are # supported and on which compilers. # canBuildQtConcurrent="yes" canUseV8Snapshot="yes" case "$XPLATFORM" in hpux-g++*) # PA-RISC's assembly is too limited # gcc 3.4 on that platform can't build QtXmlPatterns # the assembly it generates cannot be compiled # Check gcc's version case "$(${QMAKE_CONF_COMPILER} -dumpversion)" in 4*) ;; 3.4*) canBuildQtXmlPatterns="no" ;; *) canBuildWebKit="no" canBuildQtXmlPatterns="no" ;; esac ;; unsupported/vxworks-*-g++*) canBuildWebKit="no" ;; unsupported/vxworks-*-dcc*) canBuildWebKit="no" canBuildQtXmlPatterns="no" ;; *-g++*) # Check gcc's version case "$(${QMAKE_CONF_COMPILER} -dumpversion)" in 4*|3.4*) ;; 3.3*) canBuildWebKit="no" ;; *) canBuildWebKit="no" canBuildQtXmlPatterns="no" ;; esac ;; solaris-cc*) # Check the compiler version case `${QMAKE_CONF_COMPILER} -V 2>&1 | awk '{print $4}'` in 5.[012345678]) canBuildWebKit="no" canBuildQtXmlPatterns="no" canBuildQtConcurrent="no" ;; 5.*) canBuildWebKit="no" canBuildQtConcurrent="no" ;; esac ;; hpux-acc*) canBuildWebKit="no" canBuildQtXmlPatterns="no" canBuildQtConcurrent="no" ;; hpuxi-acc*) canBuildWebKit="no" ;; aix-xlc*) # Get the xlC version cat > xlcver.c < int main() { printf("%d.%d\n", __xlC__ >> 8, __xlC__ & 0xFF); return 0; } EOF xlcver= if ${QMAKE_CONF_COMPILER} -o xlcver xlcver.c >/dev/null 2>/dev/null; then xlcver=`./xlcver 2>/dev/null` rm -f ./xlcver fi if [ "$OPT_VERBOSE" = "yes" ]; then if [ -n "$xlcver" ]; then echo Found IBM xlC version: $xlcver. else echo Could not determine IBM xlC version, assuming oldest supported. fi fi case "$xlcver" in [123456].*) canBuildWebKit="no" canBuildQtXmlPatterns="no" canBuildQtConcurrent="no" ;; *) canBuildWebKit="no" canBuildQtConcurrent="no" ;; esac ;; irix-cc*) canBuildWebKit="no" canBuildQtConcurrent="no" ;; esac if [ "$CFG_GUI" = "no" ]; then # WebKit requires Qt GUI canBuildWebKit="no" fi if [ "$CFG_SHARED" = "no" ]; then echo echo "WARNING: Using static linking will disable the WebKit module." echo canBuildWebKit="no" fi CFG_CONCURRENT="yes" if [ "$canBuildQtConcurrent" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CONCURRENT" CFG_CONCURRENT="no" else QT_CONFIG="$QT_CONFIG concurrent" fi # ### Vestige if [ "$CFG_AUDIO_BACKEND" = "yes" ]; then QT_CONFIG="$QT_CONFIG audio-backend" fi # ### Vestige if [ "$CFG_WEBKIT" = "debug" ]; then QMAKE_CONFIG="$QMAKE_CONFIG webkit-debug" fi # ### Vestige QT_CONFIG="$QT_CONFIG v8" # Detect snapshot support if [ "$CFG_ARCH" != "$CFG_HOST_ARCH" ]; then case "$CFG_HOST_ARCH,$CFG_ARCH" in i386,arm) ;; *) canUseV8Snapshot="no" ;; esac else if [ -n "$_SBOX_DIR" -a "$CFG_ARCH" = "arm" ]; then # QEMU crashes when building inside Scratchbox with an ARM target canUseV8Snapshot="no" fi fi if [ "$CFG_V8SNAPSHOT" = "auto" ]; then CFG_V8SNAPSHOT="$canUseV8Snapshot" fi if [ "$CFG_V8SNAPSHOT" = "yes" -a "$canUseV8Snapshot" = "no" ]; then echo "Error: V8 snapshot was requested, but is not supported on this platform." exit 1 fi if [ "$CFG_V8SNAPSHOT" = "yes" ]; then QT_CONFIG="$QT_CONFIG v8snapshot" fi # ### Vestige if [ "$CFG_QML_DEBUG" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_QML_NO_DEBUGGER" fi case "$QMAKE_CONF_COMPILER" in *clang++*) # Clang COMPILER_VERSION=`${QMAKE_CONF_COMPILER} -v 2>&1 | sed -n ' /^Apple clang version /{s///; s/^\([0-9]*\)\.\([0-9]*\).*$/QT_APPLE_CLANG_MAJOR_VERSION=\1; QT_APPLE_CLANG_MINOR_VERSION=\2/;p;q;} /^clang version /{s///; s/^\([0-9]*\)\.\([0-9]*\).*$/QT_CLANG_MAJOR_VERSION=\1; QT_CLANG_MINOR_VERSION=\2/;p;q;}'` eval "$COMPILER_VERSION" ;; *icpc) # Intel CC COMPILER_VERSION=`${QMAKE_CONF_COMPILER} -v 2>&1 | sed -n ' s/icpc version \([0-9]*\)\.\([0-9]*\)\.\([0-9]*\) .*$/QT_ICC_MAJOR_VERSION=\1; QT_ICC_MINOR_VERSION=\2; QT_ICC_PATCH_VERSION=\3/p'` eval "$COMPILER_VERSION" ;; *g++*) # GNU C++ COMPILER_VERSION=`${QMAKE_CONF_COMPILER} -dumpversion 2>/dev/null` case "$COMPILER_VERSION" in *.*.*) QT_GCC_MAJOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\1,'` QT_GCC_MINOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\2,'` QT_GCC_PATCH_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\3,'` ;; *.*) QT_GCC_MAJOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\).*,\1,'` QT_GCC_MINOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\).*,\2,'` QT_GCC_PATCH_VERSION=0 ;; esac ;; *) # ;; esac #------------------------------------------------------------------------------- # part of configuration information goes into qconfig.h #------------------------------------------------------------------------------- case "$CFG_QCONFIG" in full) echo "/* Everything */" >"$outpath/src/corelib/global/qconfig.h.new" ;; *) tmpconfig="$outpath/src/corelib/global/qconfig.h.new" echo "#ifndef QT_BOOTSTRAPPED" >"$tmpconfig" if [ -f "$relpath/src/corelib/global/qconfig-$CFG_QCONFIG.h" ]; then cat "$relpath/src/corelib/global/qconfig-$CFG_QCONFIG.h" >>"$tmpconfig" elif [ -f `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"` ]; then cat `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"` >>"$tmpconfig" fi echo "#endif" >>"$tmpconfig" ;; esac cat >>"$outpath/src/corelib/global/qconfig.h.new" <>"$outpath/src/corelib/global/qconfig.h.new" [ '!' -z "$LicenseKeyExt" ] && echo "#define QT_PRODUCT_LICENSEKEY \"$LicenseKeyExt\"" >>"$outpath/src/corelib/global/qconfig.h.new" if [ "$CFG_SHARED" = "no" ]; then cat >>"$outpath/src/corelib/global/qconfig.h.new" <>"$outpath/src/corelib/global/qconfig.h.new" fi if [ "$CFG_FRAMEWORK" = "yes" ]; then echo "#define QT_MAC_FRAMEWORK_BUILD" >>"$outpath/src/corelib/global/qconfig.h.new" fi if [ "$BUILD_ON_MAC" = "yes" ]; then cat >>"$outpath/src/corelib/global/qconfig.h.new" <>"$outpath/src/corelib/global/qconfig.h.new" fi #REDUCE_RELOCATIONS is a elf/unix only thing, so not in windows configure.exe if [ "$CFG_REDUCE_RELOCATIONS" = "yes" ]; then echo "#define QT_REDUCE_RELOCATIONS" >>"$outpath/src/corelib/global/qconfig.h.new" fi # Add compiler sub-architecture support echo "" >>"$outpath/src/corelib/global/qconfig.h.new" echo "// Compiler sub-arch support" >>"$outpath/src/corelib/global/qconfig.h.new" for SUBARCH in SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 AVX AVX2 \ IWMMXT NEON \ MIPS_DSP MIPS_DSPR2; do eval "VAL=\$CFG_$SUBARCH" case "$VAL" in yes) echo "#define QT_COMPILER_SUPPORTS_$SUBARCH" \ >>"$outpath/src/corelib/global/qconfig.h.new" ;; esac done echo "" >>"$outpath/src/corelib/global/qconfig.h.new" if [ "$CFG_DEV" = "yes" ]; then echo "#define QT_BUILD_INTERNAL" >>"$outpath/src/corelib/global/qconfig.h.new" fi # Add QPA to config.h QCONFIG_FLAGS="$QCONFIG_FLAGS" if [ "${CFG_USE_FLOATMATH}" = "yes" ]; then QCONFIG_FLAGS="${QCONFIG_FLAGS} QT_USE_MATH_H_FLOATS" fi # Add turned on SQL drivers for DRIVER in $CFG_SQL_AVAILABLE; do eval "VAL=\$CFG_SQL_$DRIVER" case "$VAL" in qt) ONDRIVER=`echo $DRIVER | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` QCONFIG_FLAGS="$QCONFIG_FLAGS QT_SQL_$ONDRIVER" SQL_DRIVERS="$SQL_DRIVERS $DRIVER" ;; plugin) SQL_PLUGINS="$SQL_PLUGINS $DRIVER" ;; esac done QMakeVar set sql-drivers "$SQL_DRIVERS" QMakeVar set sql-plugins "$SQL_PLUGINS" # Add other configuration options to the qconfig.h file [ "$CFG_GIF" = "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_BUILTIN_GIF_READER=1" [ "$CFG_PNG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_PNG" [ "$CFG_JPEG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_JPEG" [ "$CFG_ZLIB" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ZLIB" [ "$CFG_DBUS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_DBUS" # X11/Unix/Mac only configs [ "$CFG_CUPS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CUPS" [ "$CFG_ICONV" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ICONV" [ "$CFG_GLIB" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GLIB" [ "$CFG_GSTREAMER" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GSTREAMER" [ "$CFG_QGTKSTYLE" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_STYLE_GTK" [ "$CFG_CLOCK_MONOTONIC" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CLOCK_MONOTONIC" [ "$CFG_MREMAP" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_MREMAP" [ "$CFG_GETADDRINFO" = "no" ]&& QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GETADDRINFO" [ "$CFG_IPV6IFNAME" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IPV6IFNAME" [ "$CFG_GETIFADDRS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GETIFADDRS" [ "$CFG_INOTIFY" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_INOTIFY" [ "$CFG_EVENTFD" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_EVENTFD" [ "$CFG_NIS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_NIS" [ "$CFG_OPENSSL" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_OPENSSL QT_NO_SSL" [ "$CFG_OPENSSL" = "linked" ]&& QCONFIG_FLAGS="$QCONFIG_FLAGS QT_LINKED_OPENSSL" [ "$CFG_SM" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SESSIONMANAGER" [ "$CFG_XCURSOR" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XCURSOR" [ "$CFG_XFIXES" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XFIXES" [ "$CFG_FONTCONFIG" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_FONTCONFIG" [ "$CFG_XINERAMA" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XINERAMA" [ "$CFG_XKB" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XKB" [ "$CFG_XRANDR" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XRANDR" [ "$CFG_XRENDER" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XRENDER" [ "$CFG_MITSHM" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_MITSHM" [ "$CFG_XSHAPE" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SHAPE" [ "$CFG_XVIDEO" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XVIDEO" [ "$CFG_XSYNC" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XSYNC" [ "$CFG_XINPUT" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XINPUT QT_NO_TABLET" [ "$CFG_XCURSOR" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XCURSOR" [ "$CFG_XINERAMA" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XINERAMA" [ "$CFG_XFIXES" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XFIXES" [ "$CFG_XRANDR" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XRANDR" [ "$CFG_XINPUT" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XINPUT" [ "$CFG_ALSA" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ALSA" [ "$CFG_PULSEAUDIO" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_PULSEAUDIO" [ "$CFG_COREWLAN" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_COREWLAN" # sort QCONFIG_FLAGS for neatness if we can [ '!' -z "$AWK" ] && QCONFIG_FLAGS=`echo $QCONFIG_FLAGS | $AWK '{ gsub(" ", "\n"); print }' | sort | uniq` QCONFIG_FLAGS=`echo $QCONFIG_FLAGS` if [ -n "$QCONFIG_FLAGS" ]; then cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF #ifndef QT_BOOTSTRAPPED EOF for cfg in $QCONFIG_FLAGS; do cfgd=`echo $cfg | sed 's/=.*$//'` # trim pushed 'Foo=Bar' defines cfg=`echo $cfg | sed 's/=/ /'` # turn first '=' into a space # figure out define logic, so we can output the correct # ifdefs to override the global defines in a project cfgdNeg= if [ true ] && echo "$cfgd" | grep 'QT_NO_' >/dev/null 2>&1; then # QT_NO_option can be forcefully turned on by QT_option cfgdNeg=`echo $cfgd | sed "s,QT_NO_,QT_,"` elif [ true ] && echo "$cfgd" | grep 'QT_' >/dev/null 2>&1; then # QT_option can be forcefully turned off by QT_NO_option cfgdNeg=`echo $cfgd | sed "s,QT_,QT_NO_,"` fi if [ -z $cfgdNeg ]; then cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF #ifndef $cfgd # define $cfg #endif EOF else cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF #if defined($cfgd) && defined($cfgdNeg) # undef $cfgd #elif !defined($cfgd) && !defined($cfgdNeg) # define $cfg #endif EOF fi done cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF #endif // QT_BOOTSTRAPPED EOF fi if [ "$CFG_REDUCE_EXPORTS" = "yes" ]; then cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF #define QT_VISIBILITY_AVAILABLE EOF fi if [ -n "$QT_LIBINFIX" ]; then cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF #define QT_LIBINFIX "$QT_LIBINFIX" EOF fi echo "#define QT_QPA_DEFAULT_PLATFORM_NAME \"$QT_QPA_DEFAULT_PLATFORM\"" >>"$outpath/src/corelib/global/qconfig.h.new" # avoid unecessary rebuilds by copying only if qconfig.h has changed if cmp -s "$outpath/src/corelib/global/qconfig.h" "$outpath/src/corelib/global/qconfig.h.new"; then rm -f "$outpath/src/corelib/global/qconfig.h.new" else [ -f "$outpath/src/corelib/global/qconfig.h" ] && chmod +w "$outpath/src/corelib/global/qconfig.h" mv "$outpath/src/corelib/global/qconfig.h.new" "$outpath/src/corelib/global/qconfig.h" chmod -w "$outpath/src/corelib/global/qconfig.h" if [ ! -f "$outpath/include/QtCore/qconfig.h" ]; then ln -s "$outpath/src/corelib/global/qconfig.h" "$outpath/include/QtCore/qconfig.h" fi fi #------------------------------------------------------------------------------- # save configuration into qconfig.pri #------------------------------------------------------------------------------- QTCONFIG="$outpath/mkspecs/qconfig.pri" QTCONFIG_CONFIG="$QTCONFIG_CONFIG no_mocdepend" [ -f "$QTCONFIG.tmp" ] && rm -f "$QTCONFIG.tmp" if [ "$CFG_DEBUG" = "yes" ]; then QTCONFIG_CONFIG="$QTCONFIG_CONFIG debug" if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then QT_CONFIG="$QT_CONFIG release" fi QT_CONFIG="$QT_CONFIG debug" elif [ "$CFG_DEBUG" = "no" ]; then QTCONFIG_CONFIG="$QTCONFIG_CONFIG release" if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then QT_CONFIG="$QT_CONFIG debug" fi QT_CONFIG="$QT_CONFIG release" fi if [ "$CFG_FRAMEWORK" = "no" ]; then QTCONFIG_CONFIG="$QTCONFIG_CONFIG qt_no_framework" else QT_CONFIG="$QT_CONFIG qt_framework" QTCONFIG_CONFIG="$QTCONFIG_CONFIG qt_framework" fi if [ "$CFG_DEV" = "yes" ]; then QT_CONFIG="$QT_CONFIG private_tests" fi cat >>"$QTCONFIG.tmp" <> "$QTCONFIG.tmp" echo >> "$QTCONFIG.tmp" fi if [ -n "$PKG_CONFIG_SYSROOT_DIR" ] || [ -n "$PKG_CONFIG_LIBDIR" ]; then echo "# pkgconfig" >> "$QTCONFIG.tmp" echo "PKG_CONFIG_SYSROOT_DIR = $PKG_CONFIG_SYSROOT_DIR" >> "$QTCONFIG.tmp" echo "PKG_CONFIG_LIBDIR = $PKG_CONFIG_LIBDIR" >> "$QTCONFIG.tmp" echo >> "$QTCONFIG.tmp" fi if [ -n "$CFG_SYSROOT" ] && [ "$CFG_GCC_SYSROOT" = "yes" ]; then echo "# sysroot" >>"$QTCONFIG.tmp" echo "!host_build {" >>"$QTCONFIG.tmp" echo " QMAKE_CFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp" echo " QMAKE_CXXFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp" echo " QMAKE_LFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp" echo "}" >> "$QTCONFIG.tmp" echo >> "$QTCONFIG.tmp" fi if [ -n "$RPATH_FLAGS" ]; then echo "QMAKE_RPATHDIR += $RPATH_FLAGS" >> "$QTCONFIG.tmp" fi if [ -n "$QT_GCC_MAJOR_VERSION" ]; then echo "QT_GCC_MAJOR_VERSION = $QT_GCC_MAJOR_VERSION" >> "$QTCONFIG.tmp" echo "QT_GCC_MINOR_VERSION = $QT_GCC_MINOR_VERSION" >> "$QTCONFIG.tmp" echo "QT_GCC_PATCH_VERSION = $QT_GCC_PATCH_VERSION" >> "$QTCONFIG.tmp" fi if [ -n "$QT_ICC_MAJOR_VERSION" ]; then echo "QT_ICC_MAJOR_VERSION = $QT_ICC_MAJOR_VERSION" >> "$QTCONFIG.tmp" echo "QT_ICC_MINOR_VERSION = $QT_ICC_MINOR_VERSION" >> "$QTCONFIG.tmp" echo "QT_ICC_PATCH_VERSION = $QT_ICC_PATCH_VERSION" >> "$QTCONFIG.tmp" fi if [ -n "$QT_CLANG_MAJOR_VERSION" ]; then echo "QT_CLANG_MAJOR_VERSION = $QT_CLANG_MAJOR_VERSION" >> "$QTCONFIG.tmp" echo "QT_CLANG_MINOR_VERSION = $QT_CLANG_MINOR_VERSION" >> "$QTCONFIG.tmp" fi if [ -n "$QT_APPLE_CLANG_MAJOR_VERSION" ]; then echo "QT_APPLE_CLANG_MAJOR_VERSION = $QT_APPLE_CLANG_MAJOR_VERSION" >> "$QTCONFIG.tmp" echo "QT_APPLE_CLANG_MINOR_VERSION = $QT_APPLE_CLANG_MINOR_VERSION" >> "$QTCONFIG.tmp" fi if [ -n "$QMAKE_INCDIR_OPENGL_ES2" ]; then echo "#Qt opengl include path" >> "$QTCONFIG.tmp" echo "QMAKE_INCDIR_OPENGL_ES2 = `shellArgumentListToQMakeList "$QMAKE_INCDIR_OPENGL_ES2"`" >> "$QTCONFIG.tmp" fi # replace qconfig.pri if it differs from the newly created temp file if cmp -s "$QTCONFIG.tmp" "$QTCONFIG"; then rm -f "$QTCONFIG.tmp" else mv -f "$QTCONFIG.tmp" "$QTCONFIG" fi #------------------------------------------------------------------------------- # save configuration into qmodule.pri #------------------------------------------------------------------------------- QTMODULE="$outpath/mkspecs/qmodule.pri" echo "CONFIG += $QMAKE_CONFIG" >> "$QTMODULE.tmp" echo "QT_BUILD_PARTS += $CFG_BUILD_PARTS" >> "$QTMODULE.tmp" if [ -n "$QT_CFLAGS_PSQL" ]; then echo "QT_CFLAGS_PSQL = $QT_CFLAGS_PSQL" >> "$QTMODULE.tmp" fi if [ -n "$QT_LFLAGS_PSQL" ]; then echo "QT_LFLAGS_PSQL = $QT_LFLAGS_PSQL" >> "$QTMODULE.tmp" fi if [ -n "$QT_CFLAGS_MYSQL" ]; then echo "QT_CFLAGS_MYSQL = $QT_CFLAGS_MYSQL" >> "$QTMODULE.tmp" fi if [ -n "$QT_LFLAGS_MYSQL" ]; then echo "QT_LFLAGS_MYSQL = $QT_LFLAGS_MYSQL" >> "$QTMODULE.tmp" fi if [ -n "$QT_CFLAGS_SQLITE" ]; then echo "QT_CFLAGS_SQLITE = $QT_CFLAGS_SQLITE" >> "$QTMODULE.tmp" fi if [ -n "$QT_LFLAGS_SQLITE" ]; then echo "QT_LFLAGS_SQLITE = $QT_LFLAGS_SQLITE" >> "$QTMODULE.tmp" fi if [ -n "$QT_LFLAGS_ODBC" ]; then echo "QT_LFLAGS_ODBC = $QT_LFLAGS_ODBC" >> "$QTMODULE.tmp" fi if [ -n "$QT_LFLAGS_TDS" ]; then echo "QT_LFLAGS_TDS = $QT_LFLAGS_TDS" >> "$QTMODULE.tmp" fi if [ "$QT_EDITION" != "QT_EDITION_OPENSOURCE" ]; then echo "DEFINES *= QT_EDITION=QT_EDITION_DESKTOP" >> "$QTMODULE.tmp" fi #dump in the OPENSSL_LIBS info if [ '!' -z "$OPENSSL_LIBS" ]; then echo "OPENSSL_LIBS = $OPENSSL_LIBS" >> "$QTMODULE.tmp" elif [ "$CFG_OPENSSL" = "linked" ]; then echo "OPENSSL_LIBS = -lssl -lcrypto" >> "$QTMODULE.tmp" fi # cmdline args cat "$QMAKE_VARS_FILE" >> "$QTMODULE.tmp" # QMAKE_VARS_FILE will be still needed for a status message. # replace qmodule.pri if it differs from the newly created temp file if cmp -s "$QTMODULE.tmp" "$QTMODULE"; then rm -f "$QTMODULE.tmp" else mv -f "$QTMODULE.tmp" "$QTMODULE" fi #------------------------------------------------------------------------------- # save configuration into .qmake.cache #------------------------------------------------------------------------------- CACHEFILE="$outpath/.qmake.cache" [ -f "$CACHEFILE.tmp" ] && rm -f "$CACHEFILE.tmp" cat >>"$CACHEFILE.tmp" <&1 1>$outpath/config.summary # redirect output temporarily to config.summary echo if [ "$XPLATFORM" = "$PLATFORM" ]; then echo "Build type: $PLATFORM" else echo "Building on: $PLATFORM" echo "Building for: $XPLATFORM" fi # the missing space before $CFG_FEATURES is intentional echo "Architecture: $CFG_ARCH, features:$CFG_CPUFEATURES" echo "Host architecture: $CFG_HOST_ARCH, features:$CFG_HOST_CPUFEATURES" if [ -n "$PLATFORM_NOTES" ]; then echo "Platform notes:" echo "$PLATFORM_NOTES" else echo fi if [ "$OPT_VERBOSE" = "yes" ]; then echo $ECHO_N "qmake vars .......... $ECHO_C" cat "$QMAKE_VARS_FILE" | tr '\n' ' ' echo "qmake switches ......... $QMAKE_SWITCHES" fi echo "Build .................. $CFG_BUILD_PARTS" echo "Configuration .......... $QMAKE_CONFIG $QT_CONFIG" if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then echo "Debug .................. yes (combined)" if [ "$CFG_DEBUG" = "yes" ]; then echo "Default Link ........... debug" else echo "Default Link ........... release" fi else echo "Debug .................. $CFG_DEBUG" fi if [ "$CFG_RELEASE" = "yes" ] || [ "$CFG_DEBUG_RELEASE" = "yes" ]; then echo "Force debug info ....... $CFG_FORCEDEBUGINFO" fi echo "C++11 support .......... $CFG_CXX11" if [ -n "$PKG_CONFIG" ]; then echo "pkg-config ............. yes" else echo "pkg-config ............. no" fi [ "$CFG_DBUS" = "no" ] && echo "Qt D-Bus module ........ no" [ "$CFG_DBUS" = "yes" ] && echo "Qt D-Bus module ........ yes (run-time)" [ "$CFG_DBUS" = "linked" ] && echo "Qt D-Bus module ........ yes (linked)" echo "Qt Concurrent code ..... $CFG_CONCURRENT" echo "Qt GUI module .......... $CFG_GUI" echo "Qt Widgets module ...... $CFG_WIDGETS" if [ "$CFG_JAVASCRIPTCORE_JIT" = "auto" ]; then echo "JavaScriptCore JIT ..... To be decided by JavaScriptCore" else echo "JavaScriptCore JIT ..... $CFG_JAVASCRIPTCORE_JIT" fi echo "QML debugging .......... $CFG_QML_DEBUG" echo "PCH support ............ $CFG_PRECOMPILE" if [ "$CFG_ARCH" = "i386" -o "$CFG_ARCH" = "x86_64" ]; then echo "SSE2/SSE3/SSSE3......... ${CFG_SSE2}/${CFG_SSE3}/${CFG_SSSE3}" echo "SSE4.1/SSE4.2........... ${CFG_SSSE3}/${CFG_SSE4_1}/${CFG_SSE4_2}" echo "AVX/AVX2................ ${CFG_AVX}/${CFG_AVX2}" elif [ "$CFG_ARCH" = "arm" ]; then echo "iWMMXt support ......... ${CFG_IWMMXT}" echo "NEON support ........... ${CFG_NEON}" fi if [ "$CFG_ARCH" = "mips" ]; then echo "MIPS_DSP/MIPS_DSPR2..... ${CFG_MIPS_DSP}/${CFG_MIPS_DSPR2}" fi echo "IPv6 ifname support .... $CFG_IPV6IFNAME" echo "getaddrinfo support .... $CFG_GETADDRINFO" echo "getifaddrs support ..... $CFG_GETIFADDRS" echo "Accessibility .......... $CFG_ACCESSIBILITY" echo "NIS support ............ $CFG_NIS" echo "CUPS support ........... $CFG_CUPS" echo "Iconv support .......... $CFG_ICONV" echo "Glib support ........... $CFG_GLIB" echo "GStreamer support ...... $CFG_GSTREAMER" echo "PulseAudio support ..... $CFG_PULSEAUDIO" echo "Large File support ..... $CFG_LARGEFILE" echo "GIF support ............ $CFG_GIF" if [ "$CFG_JPEG" = "no" ]; then echo "JPEG support ........... $CFG_JPEG" else echo "JPEG support ........... $CFG_JPEG ($CFG_LIBJPEG)" fi if [ "$CFG_PNG" = "no" ]; then echo "PNG support ............ $CFG_PNG" else echo "PNG support ............ $CFG_PNG ($CFG_LIBPNG)" fi echo "zlib support ........... $CFG_ZLIB" echo "Session management ..... $CFG_SM" echo "libudev support ........ $CFG_LIBUDEV" if [ "$XPLATFORM_QNX" = "yes" ]; then echo "SLOG2 support .......... $CFG_SLOG2" fi echo "Use system proxies ..... $CFG_SYSTEM_PROXIES" if [ "$CFG_OPENGL" = "desktop" ]; then echo "OpenGL support ......... yes (Desktop OpenGL)" elif [ "$CFG_OPENGL" = "es2" ]; then echo "OpenGL support ......... yes (OpenGL ES 2.x)" else echo "OpenGL support ......... no" fi if [ "$CFG_OPENVG" ]; then if [ "$CFG_OPENVG_SHIVA" = "yes" ]; then echo "OpenVG support ......... ShivaVG" else echo "OpenVG support ......... $CFG_OPENVG" fi fi echo "XShape support ......... $CFG_XSHAPE" echo "XVideo support ......... $CFG_XVIDEO" echo "XSync support .......... $CFG_XSYNC" echo "Xinerama support ....... $CFG_XINERAMA" echo "Xcursor support ........ $CFG_XCURSOR" echo "Xfixes support ......... $CFG_XFIXES" echo "Xrandr support ......... $CFG_XRANDR" echo "Xi support ............. $CFG_XINPUT" echo "Xi2 support ............ $CFG_XINPUT2" echo "MIT-SHM support ........ $CFG_MITSHM" echo "FontConfig support ..... $CFG_FONTCONFIG" echo "XKB Support ............ $CFG_XKB" echo "GTK theme support ...... $CFG_QGTKSTYLE" if [ "$XPLATFORM_MINGW" = "yes" ] ; then echo "DirectWrite support .... $CFG_DIRECTWRITE" fi [ "$CFG_SQL_mysql" != "no" ] && echo "MySQL support .......... $CFG_SQL_mysql" [ "$CFG_SQL_psql" != "no" ] && echo "PostgreSQL support ..... $CFG_SQL_psql" [ "$CFG_SQL_odbc" != "no" ] && echo "ODBC support ........... $CFG_SQL_odbc" [ "$CFG_SQL_oci" != "no" ] && echo "OCI support ............ $CFG_SQL_oci" [ "$CFG_SQL_tds" != "no" ] && echo "TDS support ............ $CFG_SQL_tds" [ "$CFG_SQL_db2" != "no" ] && echo "DB2 support ............ $CFG_SQL_db2" [ "$CFG_SQL_ibase" != "no" ] && echo "InterBase support ...... $CFG_SQL_ibase" [ "$CFG_SQL_sqlite2" != "no" ] && echo "SQLite 2 support ....... $CFG_SQL_sqlite2" [ "$CFG_SQL_sqlite" != "no" ] && echo "SQLite support ......... $CFG_SQL_sqlite ($CFG_SQLITE)" OPENSSL_LINKAGE="" if [ "$CFG_OPENSSL" = "yes" ]; then OPENSSL_LINKAGE="(run-time)" elif [ "$CFG_OPENSSL" = "linked" ]; then OPENSSL_LINKAGE="(linked)" fi echo "OpenSSL support ........ $CFG_OPENSSL $OPENSSL_LINKAGE" echo "Alsa support ........... $CFG_ALSA" if [ "$BUILD_ON_MAC" = "yes" ]; then echo "CoreWlan support ....... $CFG_COREWLAN" fi echo "libICU support ......... $CFG_ICU" echo "PCRE support ........... $CFG_PCRE" echo "Xcb support ............ $CFG_XCB" echo "Xrender support ........ $CFG_XRENDER" if [ "$XPLATFORM_MAEMO" = "yes" ] && [ "$CFG_XCB" != "no" ]; then echo "XInput2 support ........ $CFG_XINPUT2" fi echo "EGLFS support .......... $CFG_EGLFS" echo "DirectFB support ....... $CFG_DIRECTFB" echo "LinuxFB support ........ $CFG_LINUXFB" echo "KMS support ............ $CFG_KMS" echo # complain about not being able to use dynamic plugins if we are using a static build if [ "$CFG_SHARED" = "no" ]; then echo echo "WARNING: Using static linking will disable the use of dynamically" echo "loaded plugins. Make sure to import all needed static plugins," echo "or compile needed modules into the library." echo fi if [ "$CFG_OPENSSL" = "linked" ] && [ "$OPENSSL_LIBS" = "" ]; then echo echo "NOTE: When linking against OpenSSL, you can override the default" echo "library names through OPENSSL_LIBS." echo "For example:" echo " OPENSSL_LIBS='-L/opt/ssl/lib -lssl -lcrypto' ./configure -openssl-linked" echo fi exec 1>&3 3>&- # restore stdout cat $outpath/config.summary # display config feedback to user if [ "$BUILD_ON_MAC" = "yes" ] && [ "$CFG_FRAMEWORK" = "yes" ] && [ "$CFG_DEBUG" = "yes" ] && [ "$CFG_DEBUG_RELEASE" = "no" ]; then echo echo "Error: debug-only framework builds are not supported. Configure with -no-framework" echo "if you want a pure debug build." echo exit 1 fi sepath=`echo "$relpath" | sed -e 's/\\./\\\\./g'` PROCS=1 EXEC="" rm -f "$QMAKE_VARS_FILE" 2>/dev/null #------------------------------------------------------------------------------- # build makefiles based on the configuration #------------------------------------------------------------------------------- if [ "$CFG_PROCESS" != "no" ]; then if [ "$CFG_PROCESS" = "full" ]; then echo "Creating makefiles. Please wait..." "$outpath/bin/qmake" -r "$relpath" echo "Done" else "$outpath/bin/qmake" "$relpath" fi fi #------------------------------------------------------------------------------- # check for platforms that we don't yet know about #------------------------------------------------------------------------------- if [ "$CFG_ARCH" = "unknown" ]; then cat < will be used (when available). The generic implementations are generally as fast as and always as safe as a specialized implementation. If no generic implementation is available, Qt will use a fallback UNIX implementation which uses a single pthread_mutex_t to protect all atomic operations. This implementation is the slow (but safe) fallback implementation for architectures Qt does not yet support. EOF fi #------------------------------------------------------------------------------- # check if the user passed the -no-zlib option, which is no longer supported #------------------------------------------------------------------------------- if [ -n "$ZLIB_FORCED" ]; then which_zlib="supplied" if [ "$CFG_ZLIB" = "system" ]; then which_zlib="system" fi cat </dev/null 2>&1 || CONFIG_STATUS="$CONFIG_STATUS -confirm-license" [ -f "$outpath/config.status" ] && rm -f "$outpath/config.status" echo "#!/bin/sh" > "$outpath/config.status" [ -n "$PKG_CONFIG_SYSROOT_DIR" ] && \ echo "export PKG_CONFIG_SYSROOT_DIR=$PKG_CONFIG_SYSROOT_DIR" >> "$outpath/config.status" [ -n "$PKG_CONFIG_LIBDIR" ] && \ echo "export PKG_CONFIG_LIBDIR=$PKG_CONFIG_LIBDIR" >> "$outpath/config.status" echo "if [ \"\$#\" -gt 0 ]; then" >> "$outpath/config.status" echo " $CONFIG_STATUS \"\$@\"" >> "$outpath/config.status" echo "else" >> "$outpath/config.status" echo " $CONFIG_STATUS" >> "$outpath/config.status" echo "fi" >> "$outpath/config.status" chmod +x "$outpath/config.status" fi if [ -n "$RPATH_MESSAGE" ]; then echo echo "$RPATH_MESSAGE" fi MAKE=`basename "$MAKE"` echo echo Qt is now configured for building. Just run \'$MAKE\'. if [ "$relpath" = "$QT_INSTALL_PREFIX" ]; then echo Once everything is built, Qt is installed. echo You should not run \'$MAKE install\'. else echo Once everything is built, you must run \'$MAKE install\'. echo Qt will be installed into $QT_INSTALL_PREFIX fi echo echo To reconfigure, run \'$MAKE confclean\' and \'configure\'. echo