# Copyright (C) 2022 The Qt Company Ltd. # SPDX-License-Identifier: BSD-3-Clause # These values should be kept in sync with those in qtbase/.cmake.conf cmake_minimum_required(VERSION 3.16...3.20) ############################################### # # Macros and functions for building Qt modules # ############################################### # Recursively reads the dependencies section from dependencies.yaml in ${repo_dir} and returns the # list of dependencies, including transitive ones, in out_var. # # The returned dependencies are topologically sorted. # # Example output for qtimageformats: # qtbase;qtshadertools;qtsvg;qtdeclarative;qttools # function(qt_internal_read_repo_dependencies out_var repo_dir) set(seen ${ARGN}) set(dependencies "") set(in_dependencies_section FALSE) set(dependencies_file "${repo_dir}/dependencies.yaml") if(EXISTS "${dependencies_file}") file(STRINGS "${dependencies_file}" lines) foreach(line IN LISTS lines) if(line MATCHES "^([^ ]+):") if(CMAKE_MATCH_1 STREQUAL "dependencies") set(in_dependencies_section TRUE) else() set(in_dependencies_section FALSE) endif() elseif(in_dependencies_section AND line MATCHES "^ (.+):$") set(dependency "${CMAKE_MATCH_1}") set(dependency_repo_dir "${repo_dir}/${dependency}") string(REGEX MATCH "[^/]+$" dependency "${dependency}") if(NOT dependency IN_LIST seen) qt_internal_read_repo_dependencies(subdeps "${dependency_repo_dir}" ${seen} ${dependency}) list(APPEND dependencies ${subdeps} ${dependency}) endif() endif() endforeach() list(REMOVE_DUPLICATES dependencies) endif() set(${out_var} "${dependencies}" PARENT_SCOPE) endfunction() set(QT_BACKUP_CMAKE_INSTALL_PREFIX_BEFORE_EXTRA_INCLUDE "${CMAKE_INSTALL_PREFIX}") if(EXISTS "${CMAKE_CURRENT_LIST_DIR}/QtBuildInternalsExtra.cmake") include(${CMAKE_CURRENT_LIST_DIR}/QtBuildInternalsExtra.cmake) endif() # The variables might have already been set in QtBuildInternalsExtra.cmake if the file is included # while building a new module and not QtBase. In that case, stop overriding the value. if(NOT INSTALL_CMAKE_NAMESPACE) set(INSTALL_CMAKE_NAMESPACE "Qt${PROJECT_VERSION_MAJOR}" CACHE STRING "CMake namespace [Qt${PROJECT_VERSION_MAJOR}]") endif() if(NOT QT_CMAKE_EXPORT_NAMESPACE) set(QT_CMAKE_EXPORT_NAMESPACE "Qt${PROJECT_VERSION_MAJOR}" CACHE STRING "CMake namespace used when exporting targets [Qt${PROJECT_VERSION_MAJOR}]") endif() macro(qt_set_up_build_internals_paths) # Set up the paths for the cmake modules located in the prefix dir. Prepend, so the paths are # least important compared to the source dir ones, but more important than command line # provided ones. set(QT_CMAKE_MODULE_PATH "${QT_BUILD_INTERNALS_PATH}/../${QT_CMAKE_EXPORT_NAMESPACE}") list(PREPEND CMAKE_MODULE_PATH "${QT_CMAKE_MODULE_PATH}") # Prepend the qtbase source cmake directory to CMAKE_MODULE_PATH, # so that if a change is done in cmake/QtBuild.cmake, it gets automatically picked up when # building qtdeclarative, rather than having to build qtbase first (which will copy # QtBuild.cmake to the build dir). This is similar to qmake non-prefix builds, where the # source qtbase/mkspecs directory is used. # TODO: Clean this up, together with qt_internal_try_compile_binary_for_strip to only use the # the qtbase sources when building qtbase. And perhaps also when doing a non-prefix # developer-build. if(EXISTS "${QT_SOURCE_TREE}/cmake") list(PREPEND CMAKE_MODULE_PATH "${QT_SOURCE_TREE}/cmake") endif() # If the repo has its own cmake modules, include those in the module path. if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/cmake") list(PREPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake") endif() # Find the cmake files when doing a standalone tests build. if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/../cmake") list(PREPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/../cmake") endif() endmacro() # Set up the build internal paths unless explicitly requested not to. if(NOT QT_BUILD_INTERNALS_SKIP_CMAKE_MODULE_PATH_ADDITION) qt_set_up_build_internals_paths() endif() # Define some constants to check for certain platforms, etc. # Needs to be loaded before qt_repo_build() to handle require() clauses before even starting a repo # build. include(QtPlatformSupport) function(qt_build_internals_disable_pkg_config_if_needed) # pkg-config should not be used by default on Darwin and Windows platforms (and QNX), as defined # in the qtbase/configure.json. Unfortunately by the time the feature is evaluated there are # already a few find_package() calls that try to use the FindPkgConfig module. # Thus, we have to duplicate the condition logic here and disable pkg-config for those platforms # by default. # We also need to check if the pkg-config executable exists, to mirror the condition test in # configure.json. We do that by trying to find the executable ourselves, and not delegating to # the FindPkgConfig module because that has more unwanted side-effects. # # Note that on macOS, if the pkg-config feature is enabled by the user explicitly, we will also # tell CMake to consider paths like /usr/local (Homebrew) as system paths when looking for # packages. # We have to do that because disabling these paths but keeping pkg-config # enabled won't enable finding all system libraries via pkg-config alone, many libraries can # only be found via FooConfig.cmake files which means /usr/local should be in the system prefix # path. set(pkg_config_enabled ON) qt_build_internals_find_pkg_config_executable() if(APPLE OR WIN32 OR QNX OR ANDROID OR WASM OR (NOT PKG_CONFIG_EXECUTABLE)) set(pkg_config_enabled OFF) endif() # Features won't have been evaluated yet if this is the first run, have to evaluate this here if ((NOT DEFINED "FEATURE_pkg_config") AND (DEFINED "INPUT_pkg_config") AND (NOT "${INPUT_pkg_config}" STREQUAL "undefined") AND (NOT "${INPUT_pkg_config}" STREQUAL "")) if(INPUT_pkg_config) set(FEATURE_pkg_config ON) else() set(FEATURE_pkg_config OFF) endif() endif() # If user explicitly specified a value for the feature, honor it, even if it might break # the build. if(DEFINED FEATURE_pkg_config) if(FEATURE_pkg_config) set(pkg_config_enabled ON) else() set(pkg_config_enabled OFF) endif() endif() set(FEATURE_pkg_config "${pkg_config_enabled}" CACHE STRING "Using pkg-config") if(NOT pkg_config_enabled) qt_build_internals_disable_pkg_config() else() unset(PKG_CONFIG_EXECUTABLE CACHE) endif() endfunction() # This is a copy of the first few lines in FindPkgConfig.cmake. function(qt_build_internals_find_pkg_config_executable) # find pkg-config, use PKG_CONFIG if set if((NOT PKG_CONFIG_EXECUTABLE) AND (NOT "$ENV{PKG_CONFIG}" STREQUAL "")) set(PKG_CONFIG_EXECUTABLE "$ENV{PKG_CONFIG}" CACHE FILEPATH "pkg-config executable") endif() find_program(PKG_CONFIG_EXECUTABLE NAMES pkg-config DOC "pkg-config executable") mark_as_advanced(PKG_CONFIG_EXECUTABLE) endfunction() function(qt_build_internals_disable_pkg_config) # Disable pkg-config by setting an empty executable path. There's no documented way to # mark the package as not found, but we can force all pkg_check_modules calls to do nothing # by setting the variable to an empty value. set(PKG_CONFIG_EXECUTABLE "" CACHE STRING "Disabled pkg-config usage." FORCE) endfunction() if(NOT QT_BUILD_INTERNALS_SKIP_PKG_CONFIG_ADJUSTMENT) qt_build_internals_disable_pkg_config_if_needed() endif() macro(qt_build_internals_find_pkg_config) # Find package config once before any system prefix modifications. find_package(PkgConfig QUIET) endmacro() if(NOT QT_BUILD_INTERNALS_SKIP_FIND_PKG_CONFIG) qt_build_internals_find_pkg_config() endif() function(qt_build_internals_set_up_system_prefixes) if(APPLE AND NOT FEATURE_pkg_config) # Remove /usr/local and other paths like that which CMake considers as system prefixes on # darwin platforms. CMake considers them as system prefixes, but in qmake / Qt land we only # consider the SDK path as a system prefix. # 3rd party libraries in these locations should not be picked up when building Qt, # unless opted-in via the pkg-config feature, which in turn will disable this behavior. # # Note that we can't remove /usr as a system prefix path, because many programs won't be # found then (e.g. perl). set(QT_CMAKE_SYSTEM_PREFIX_PATH_BACKUP "${CMAKE_SYSTEM_PREFIX_PATH}" PARENT_SCOPE) set(QT_CMAKE_SYSTEM_FRAMEWORK_PATH_BACKUP "${CMAKE_SYSTEM_FRAMEWORK_PATH}" PARENT_SCOPE) list(REMOVE_ITEM CMAKE_SYSTEM_PREFIX_PATH "/usr/local" # Homebrew "/opt/homebrew" # Apple Silicon Homebrew "/usr/X11R6" "/usr/pkg" "/opt" "/sw" # Fink "/opt/local" # MacPorts ) if(_CMAKE_INSTALL_DIR) list(REMOVE_ITEM CMAKE_SYSTEM_PREFIX_PATH "${_CMAKE_INSTALL_DIR}") endif() list(REMOVE_ITEM CMAKE_SYSTEM_FRAMEWORK_PATH "~/Library/Frameworks") set(CMAKE_SYSTEM_PREFIX_PATH "${CMAKE_SYSTEM_PREFIX_PATH}" PARENT_SCOPE) set(CMAKE_SYSTEM_FRAMEWORK_PATH "${CMAKE_SYSTEM_FRAMEWORK_PATH}" PARENT_SCOPE) # Also tell qt_find_package() not to use PATH when looking for packages. # We can't simply set CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH to OFF because that will break # find_program(), and for instance ccache won't be found. # That's why we set a different variable which is used by qt_find_package. set(QT_NO_USE_FIND_PACKAGE_SYSTEM_ENVIRONMENT_PATH "ON" PARENT_SCOPE) endif() endfunction() if(NOT QT_BUILD_INTERNALS_SKIP_SYSTEM_PREFIX_ADJUSTMENT) qt_build_internals_set_up_system_prefixes() endif() macro(qt_build_internals_set_up_private_api) # Check for the minimum CMake version. include(QtCMakeVersionHelpers) qt_internal_require_suitable_cmake_version() qt_internal_upgrade_cmake_policies() # Qt specific setup common for all modules: include(QtSetup) include(FeatureSummary) # Optionally include a repo specific Setup module. include(${PROJECT_NAME}Setup OPTIONAL) include(QtRepoSetup OPTIONAL) # Find Apple frameworks if needed. qt_find_apple_system_frameworks() # Decide whether tools will be built. qt_check_if_tools_will_be_built() endmacro() # find all targets defined in $subdir by recursing through all added subdirectories # populates $qt_repo_targets with a ;-list of non-UTILITY targets macro(qt_build_internals_get_repo_targets subdir) get_directory_property(_targets DIRECTORY "${subdir}" BUILDSYSTEM_TARGETS) if(_targets) foreach(_target IN LISTS _targets) get_target_property(_type ${_target} TYPE) if(NOT (${_type} STREQUAL "UTILITY" OR ${_type} STREQUAL "INTERFACE")) list(APPEND qt_repo_targets "${_target}") endif() endforeach() endif() get_directory_property(_directories DIRECTORY "${subdir}" SUBDIRECTORIES) if (_directories) foreach(_directory IN LISTS _directories) qt_build_internals_get_repo_targets("${_directory}") endforeach() endif() endmacro() # add toplevel targets for each subdirectory, e.g. qtbase_src function(qt_build_internals_add_toplevel_targets) set(qt_repo_target_all "") get_directory_property(directories DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}" SUBDIRECTORIES) foreach(directory IN LISTS directories) set(qt_repo_targets "") get_filename_component(qt_repo_target_basename ${directory} NAME) qt_build_internals_get_repo_targets("${directory}") if (qt_repo_targets) set(qt_repo_target_name "${qt_repo_targets_name}_${qt_repo_target_basename}") message(DEBUG "${qt_repo_target_name} depends on ${qt_repo_targets}") add_custom_target("${qt_repo_target_name}" COMMENT "Building everything in ${qt_repo_targets_name}/${qt_repo_target_basename}") add_dependencies("${qt_repo_target_name}" ${qt_repo_targets}) list(APPEND qt_repo_target_all "${qt_repo_target_name}") endif() endforeach() if (qt_repo_target_all) # Note qt_repo_targets_name is different from qt_repo_target_name that is used above. add_custom_target("${qt_repo_targets_name}" COMMENT "Building everything in ${qt_repo_targets_name}") add_dependencies("${qt_repo_targets_name}" ${qt_repo_target_all}) message(DEBUG "${qt_repo_targets_name} depends on ${qt_repo_target_all}") endif() endfunction() macro(qt_enable_cmake_languages) include(CheckLanguage) set(__qt_required_language_list C CXX) set(__qt_optional_language_list ) # https://gitlab.kitware.com/cmake/cmake/-/issues/20545 if(APPLE) list(APPEND __qt_optional_language_list OBJC OBJCXX) endif() foreach(__qt_lang ${__qt_required_language_list}) enable_language(${__qt_lang}) endforeach() foreach(__qt_lang ${__qt_optional_language_list}) check_language(${__qt_lang}) if(CMAKE_${__qt_lang}_COMPILER) enable_language(${__qt_lang}) endif() endforeach() # The qtbase call is handled in qtbase/CMakeLists.txt. # This call is used for projects other than qtbase, including for other project's standalone # tests. # Because the function uses QT_FEATURE_foo values, it's important that find_package(Qt6Core) is # called before this function. but that's usually the case for Qt repos. if(NOT PROJECT_NAME STREQUAL "QtBase") qt_internal_set_up_config_optimizations_like_in_qmake() endif() endmacro() # Minimum setup required to have any CMakeList.txt build as as a standalone # project after importing BuildInternals macro(qt_prepare_standalone_project) qt_set_up_build_internals_paths() qt_build_internals_set_up_private_api() qt_enable_cmake_languages() endmacro() # Define a repo target set, and store accompanying information. # # A repo target set is a subset of targets in a Qt module repository. To build a repo target set, # set QT_BUILD_SINGLE_REPO_TARGET_SET to the name of the repo target set. # # This function is to be called in the top-level project file of a repository, # before qt_internal_prepare_single_repo_target_set_build() # # This function stores information in variables of the parent scope. # # Positional Arguments: # name - The name of this repo target set. # # Named Arguments: # DEPENDS - List of Qt6 COMPONENTS that are build dependencies of this repo target set. function(qt_internal_define_repo_target_set name) set(oneValueArgs DEPENDS) set(prefix QT_REPO_TARGET_SET_) cmake_parse_arguments(${prefix}${name} "" ${oneValueArgs} "" ${ARGN}) foreach(arg IN LISTS oneValueArgs) set(${prefix}${name}_${arg} ${${prefix}${name}_${arg}} PARENT_SCOPE) endforeach() set(QT_REPO_KNOWN_TARGET_SETS "${QT_REPO_KNOWN_TARGET_SETS};${name}" PARENT_SCOPE) endfunction() # Setup a single repo target set build if QT_BUILD_SINGLE_REPO_TARGET_SET is defined. # # This macro must be called in the top-level project file of the repository after all repo target # sets have been defined. macro(qt_internal_prepare_single_repo_target_set_build) if(DEFINED QT_BUILD_SINGLE_REPO_TARGET_SET) if(NOT QT_BUILD_SINGLE_REPO_TARGET_SET IN_LIST QT_REPO_KNOWN_TARGET_SETS) message(FATAL_ERROR "Repo target set '${QT_BUILD_SINGLE_REPO_TARGET_SET}' is undefined.") endif() message(STATUS "Preparing single repo target set build of ${QT_BUILD_SINGLE_REPO_TARGET_SET}") if (NOT "${QT_REPO_TARGET_SET_${QT_BUILD_SINGLE_REPO_TARGET_SET}_DEPENDS}" STREQUAL "") find_package(${INSTALL_CMAKE_NAMESPACE} ${PROJECT_VERSION} CONFIG REQUIRED COMPONENTS ${QT_REPO_TARGET_SET_${QT_BUILD_SINGLE_REPO_TARGET_SET}_DEPENDS}) endif() endif() endmacro() macro(qt_build_repo_begin) qt_build_internals_set_up_private_api() # Prevent installation in non-prefix builds. # We need to associate targets with export names, and that is only possible to do with the # install(TARGETS) command. But in a non-prefix build, we don't want to install anything. # To make sure that developers don't accidentally run make install, add bail out code to # cmake_install.cmake. if(NOT QT_WILL_INSTALL) # In a top-level build, print a message only in qtbase, which is the first repository. if(NOT QT_SUPERBUILD OR (PROJECT_NAME STREQUAL "QtBase")) install(CODE [[message(FATAL_ERROR "Qt was configured as non-prefix build. " "Installation is not supported for this arrangement.")]]) endif() install(CODE [[return()]]) endif() qt_enable_cmake_languages() qt_internal_generate_binary_strip_wrapper() # Add global docs targets that will work both for per-repo builds, and super builds. if(NOT TARGET docs) add_custom_target(docs) add_custom_target(prepare_docs) add_custom_target(generate_docs) add_custom_target(html_docs) add_custom_target(qch_docs) add_custom_target(install_html_docs) add_custom_target(install_qch_docs) add_custom_target(install_docs) add_dependencies(html_docs generate_docs) add_dependencies(docs html_docs qch_docs) add_dependencies(install_docs install_html_docs install_qch_docs) endif() # Add global qt_plugins, qpa_plugins and qpa_default_plugins convenience custom targets. # Internal executables will add a dependency on the qpa_default_plugins target, # so that building and running a test ensures it won't fail at runtime due to a missing qpa # plugin. if(NOT TARGET qt_plugins) add_custom_target(qt_plugins) add_custom_target(qpa_plugins) add_custom_target(qpa_default_plugins) endif() string(TOLOWER ${PROJECT_NAME} project_name_lower) set(qt_repo_targets_name ${project_name_lower}) set(qt_docs_target_name docs_${project_name_lower}) set(qt_docs_prepare_target_name prepare_docs_${project_name_lower}) set(qt_docs_generate_target_name generate_docs_${project_name_lower}) set(qt_docs_html_target_name html_docs_${project_name_lower}) set(qt_docs_qch_target_name qch_docs_${project_name_lower}) set(qt_docs_install_html_target_name install_html_docs_${project_name_lower}) set(qt_docs_install_qch_target_name install_qch_docs_${project_name_lower}) set(qt_docs_install_target_name install_docs_${project_name_lower}) add_custom_target(${qt_docs_target_name}) add_custom_target(${qt_docs_prepare_target_name}) add_custom_target(${qt_docs_generate_target_name}) add_custom_target(${qt_docs_qch_target_name}) add_custom_target(${qt_docs_html_target_name}) add_custom_target(${qt_docs_install_html_target_name}) add_custom_target(${qt_docs_install_qch_target_name}) add_custom_target(${qt_docs_install_target_name}) add_dependencies(${qt_docs_generate_target_name} ${qt_docs_prepare_target_name}) add_dependencies(${qt_docs_html_target_name} ${qt_docs_generate_target_name}) add_dependencies(${qt_docs_target_name} ${qt_docs_html_target_name} ${qt_docs_qch_target_name}) add_dependencies(${qt_docs_install_target_name} ${qt_docs_install_html_target_name} ${qt_docs_install_qch_target_name}) # Make top-level prepare_docs target depend on the repository-level prepare_docs_ target. add_dependencies(prepare_docs ${qt_docs_prepare_target_name}) # Make top-level install_*_docs targets depend on the repository-level install_*_docs targets. add_dependencies(install_html_docs ${qt_docs_install_html_target_name}) add_dependencies(install_qch_docs ${qt_docs_install_qch_target_name}) # Add host_tools meta target, so that developrs can easily build only tools and their # dependencies when working in qtbase. if(NOT TARGET host_tools) add_custom_target(host_tools) add_custom_target(bootstrap_tools) endif() # Add benchmark meta target. It's collection of all benchmarks added/registered by # 'qt_internal_add_benchmark' helper. if(NOT TARGET benchmark) add_custom_target(benchmark) endif() endmacro() macro(qt_build_repo_end) if(NOT QT_BUILD_STANDALONE_TESTS) # Delayed actions on some of the Qt targets: include(QtPostProcess) # Install the repo-specific cmake find modules. qt_path_join(__qt_repo_install_dir ${QT_CONFIG_INSTALL_DIR} ${INSTALL_CMAKE_NAMESPACE}) qt_path_join(__qt_repo_build_dir ${QT_CONFIG_BUILD_DIR} ${INSTALL_CMAKE_NAMESPACE}) if(NOT PROJECT_NAME STREQUAL "QtBase") if(IS_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}/cmake") qt_copy_or_install(DIRECTORY cmake/ DESTINATION "${__qt_repo_install_dir}" FILES_MATCHING PATTERN "Find*.cmake" ) if(QT_SUPERBUILD AND QT_WILL_INSTALL) file(COPY cmake/ DESTINATION "${__qt_repo_build_dir}" FILES_MATCHING PATTERN "Find*.cmake" ) endif() endif() endif() if(NOT QT_SUPERBUILD) qt_print_feature_summary() endif() endif() qt_build_internals_add_toplevel_targets() if(NOT QT_SUPERBUILD) qt_print_build_instructions() endif() endmacro() macro(qt_build_repo) qt_build_repo_begin(${ARGN}) qt_build_repo_impl_find_package_tests() qt_build_repo_impl_src() qt_build_repo_impl_tools() qt_build_repo_impl_tests() qt_build_repo_end() qt_build_repo_impl_examples() endmacro() macro(qt_build_repo_impl_find_package_tests) # If testing is enabled, try to find the qtbase Test package. # Do this before adding src, because there might be test related conditions # in source. if (QT_BUILD_TESTS AND NOT QT_BUILD_STANDALONE_TESTS) # When looking for the Test package, do it using the Qt6 package version, in case if # PROJECT_VERSION is following a different versioning scheme. if(Qt6_VERSION) set(_qt_build_repo_impl_find_package_tests_version "${Qt6_VERSION}") else() set(_qt_build_repo_impl_find_package_tests_version "${PROJECT_VERSION}") endif() find_package(Qt6 "${_qt_build_repo_impl_find_package_tests_version}" CONFIG REQUIRED COMPONENTS Test) unset(_qt_build_repo_impl_find_package_tests_version) endif() endmacro() macro(qt_build_repo_impl_src) if(NOT QT_BUILD_STANDALONE_TESTS) if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/src/CMakeLists.txt") add_subdirectory(src) endif() endif() endmacro() macro(qt_build_repo_impl_tools) if(NOT QT_BUILD_STANDALONE_TESTS) if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/tools/CMakeLists.txt") add_subdirectory(tools) endif() endif() endmacro() macro(qt_build_repo_impl_tests) if (QT_BUILD_TESTS AND EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/tests/CMakeLists.txt") add_subdirectory(tests) if(NOT QT_BUILD_TESTS_BY_DEFAULT) set_property(DIRECTORY tests PROPERTY EXCLUDE_FROM_ALL TRUE) endif() endif() endmacro() macro(qt_build_repo_impl_examples) if(QT_BUILD_EXAMPLES AND EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/examples/CMakeLists.txt" AND NOT QT_BUILD_STANDALONE_TESTS) add_subdirectory(examples) endif() endmacro() macro(qt_set_up_standalone_tests_build) # Remove this macro once all usages of it have been removed. # Standalone tests are not handled via the main repo project and qt_build_tests. endmacro() function(qt_get_standalone_tests_config_files_path out_var) set(path "${QT_CONFIG_INSTALL_DIR}/${INSTALL_CMAKE_NAMESPACE}BuildInternals/StandaloneTests") # QT_CONFIG_INSTALL_DIR is relative in prefix builds. if(QT_WILL_INSTALL) if(DEFINED CMAKE_STAGING_PREFIX) qt_path_join(path "${CMAKE_STAGING_PREFIX}" "${path}") else() qt_path_join(path "${CMAKE_INSTALL_PREFIX}" "${path}") endif() endif() set("${out_var}" "${path}" PARENT_SCOPE) endfunction() function(qt_internal_get_standalone_tests_config_file_name out_var) # When doing a "single repo target set" build (like in qtscxqml) ensure we use a unique tests # config file for each repo target set. Using the PROJECT_NAME only is not enough because # the same file will be overridden with different content on each repo set install. set(tests_config_file_name "${PROJECT_NAME}") if(QT_BUILD_SINGLE_REPO_TARGET_SET) string(APPEND tests_config_file_name "RepoSet${QT_BUILD_SINGLE_REPO_TARGET_SET}") endif() string(APPEND tests_config_file_name "TestsConfig.cmake") set(${out_var} "${tests_config_file_name}" PARENT_SCOPE) endfunction() macro(qt_build_tests) if(QT_BUILD_STANDALONE_TESTS) # Find location of TestsConfig.cmake. These contain the modules that need to be # find_package'd when testing. qt_get_standalone_tests_config_files_path(_qt_build_tests_install_prefix) qt_internal_get_standalone_tests_config_file_name(_qt_tests_config_file_name) set(_qt_standalone_tests_config_file_path "${_qt_build_tests_install_prefix}/${_qt_tests_config_file_name}") include("${_qt_standalone_tests_config_file_path}" OPTIONAL RESULT_VARIABLE _qt_standalone_tests_included) if(NOT _qt_standalone_tests_included) message(DEBUG "Standalone tests config file not included because it does not exist: " "${_qt_standalone_tests_config_file_path}" ) else() message(DEBUG "Standalone tests config file included successfully: " "${_qt_standalone_tests_config_file_path}" ) endif() unset(_qt_standalone_tests_config_file_path) unset(_qt_standalone_tests_included) unset(_qt_tests_config_file_name) # Of course we always need the test module as well. # When looking for the Test package, do it using the Qt6 package version, in case if # PROJECT_VERSION is following a different versioning scheme. if(Qt6_VERSION) set(_qt_build_tests_package_version "${Qt6_VERSION}") else() set(_qt_build_tests_package_version "${PROJECT_VERSION}") endif() find_package(Qt6 "${_qt_build_tests_package_version}" CONFIG REQUIRED COMPONENTS Test) unset(_qt_build_tests_package_version) # Set language standards after finding Core, because that's when the relevant # feature variables are available, and the call in QtSetup is too early when building # standalone tests, because Core was not find_package()'d yet. qt_set_language_standards() if(NOT QT_SUPERBUILD) # Set up fake standalone tests install prefix, so we don't pollute the Qt install # prefix. For super builds it needs to be done in qt5/CMakeLists.txt. qt_set_up_fake_standalone_tests_install_prefix() endif() else() if(ANDROID) # When building in-tree tests we need to specify the QT_ANDROID_ABIS list. Since we # build Qt for the single ABI, build tests for this ABI only. set(QT_ANDROID_ABIS "${CMAKE_ANDROID_ARCH_ABI}") endif() endif() if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/auto/CMakeLists.txt") add_subdirectory(auto) endif() if(NOT QT_BUILD_MINIMAL_STATIC_TESTS AND NOT QT_BUILD_MINIMAL_ANDROID_MULTI_ABI_TESTS) if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/baseline/CMakeLists.txt") add_subdirectory(baseline) endif() if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/benchmarks/CMakeLists.txt" AND QT_BUILD_BENCHMARKS) add_subdirectory(benchmarks) endif() if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/manual/CMakeLists.txt" AND QT_BUILD_MANUAL_TESTS) add_subdirectory(manual) endif() endif() endmacro() function(qt_compute_relative_path_from_cmake_config_dir_to_prefix) # Compute the reverse relative path from the CMake config dir to the install prefix. # This is used in QtBuildInternalsExtras to create a relocatable relative install prefix path. # This path is used for finding syncqt and other things, regardless of initial install prefix # (e.g installed Qt was archived and unpacked to a different path on a different machine). # # This is meant to be called only once when configuring qtbase. # # Similar code exists in Qt6CoreConfigExtras.cmake.in and src/corelib/CMakeLists.txt which # might not be needed anymore. if(CMAKE_STAGING_PREFIX) set(__qt_prefix "${CMAKE_STAGING_PREFIX}") else() set(__qt_prefix "${CMAKE_INSTALL_PREFIX}") endif() if(QT_WILL_INSTALL) get_filename_component(clean_config_prefix "${__qt_prefix}/${QT_CONFIG_INSTALL_DIR}" ABSOLUTE) else() get_filename_component(clean_config_prefix "${QT_CONFIG_BUILD_DIR}" ABSOLUTE) endif() file(RELATIVE_PATH qt_path_from_cmake_config_dir_to_prefix "${clean_config_prefix}" "${__qt_prefix}") set(qt_path_from_cmake_config_dir_to_prefix "${qt_path_from_cmake_config_dir_to_prefix}" PARENT_SCOPE) endfunction() function(qt_get_relocatable_install_prefix out_var) # We need to compute it only once while building qtbase. Afterwards it's loaded from # QtBuildInternalsExtras.cmake. if(QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX) return() endif() # The QtBuildInternalsExtras value is dynamically computed, whereas the initial qtbase # configuration uses an absolute path. set(${out_var} "${CMAKE_INSTALL_PREFIX}" PARENT_SCOPE) endfunction() function(qt_set_up_fake_standalone_tests_install_prefix) # Set a fake local (non-cache) CMAKE_INSTALL_PREFIX. # Needed for standalone tests, we don't want to accidentally install a test into the Qt prefix. # Allow opt-out, if a user knows what they're doing. if(QT_NO_FAKE_STANDALONE_TESTS_INSTALL_PREFIX) return() endif() set(new_install_prefix "${CMAKE_BINARY_DIR}/fake_prefix") # It's IMPORTANT that this is not a cache variable. Otherwise # qt_get_standalone_tests_confg_files_path() will not work on re-configuration. message(STATUS "Setting local standalone test install prefix (non-cached) to '${new_install_prefix}'.") set(CMAKE_INSTALL_PREFIX "${new_install_prefix}" PARENT_SCOPE) # We also need to clear the staging prefix if it's set, otherwise CMake will modify any computed # rpaths containing the staging prefix to point to the new fake prefix, which is not what we # want. This replacement is done in cmComputeLinkInformation::GetRPath(). # # By clearing the staging prefix for the standalone tests, any detected link time # rpaths will be embedded as-is, which will point to the place where Qt was installed (aka # the staging prefix). if(DEFINED CMAKE_STAGING_PREFIX) message(STATUS "Clearing local standalone test staging prefix (non-cached).") set(CMAKE_STAGING_PREFIX "" PARENT_SCOPE) endif() endfunction() # Mean to be called when configuring examples as part of the main build tree, as well as for CMake # tests (tests that call CMake to try and build CMake applications). macro(qt_internal_set_up_build_dir_package_paths) list(PREPEND CMAKE_PREFIX_PATH "${QT_BUILD_DIR}/${INSTALL_LIBDIR}/cmake") # Make sure the CMake config files do not recreate the already-existing targets set(QT_NO_CREATE_TARGETS TRUE) endmacro() macro(qt_examples_build_begin) set(options EXTERNAL_BUILD) set(singleOpts "") set(multiOpts DEPENDS) cmake_parse_arguments(arg "${options}" "${singleOpts}" "${multiOpts}" ${ARGN}) # Use by qt_internal_add_example. set(QT_EXAMPLE_BASE_DIR "${CMAKE_CURRENT_SOURCE_DIR}") if(arg_EXTERNAL_BUILD AND QT_BUILD_EXAMPLES_AS_EXTERNAL) # Examples will be built using ExternalProject. # We always depend on all plugins so as to prevent opportunities for # weird errors associated with loading out-of-date plugins from # unrelated Qt modules. # We also depend on all targets from this repo's src and tools subdirectories # to ensure that we've built anything that a find_package() call within # an example might use. Projects can add further dependencies if needed, # but that should rarely be necessary. set(QT_EXAMPLE_DEPENDENCIES qt_plugins ${arg_DEPENDS}) if(TARGET ${qt_repo_targets_name}_src) list(APPEND QT_EXAMPLE_DEPENDENCIES ${qt_repo_targets_name}_src) endif() if(TARGET ${qt_repo_targets_name}_tools) list(APPEND QT_EXAMPLE_DEPENDENCIES ${qt_repo_targets_name}_tools) endif() set(QT_IS_EXTERNAL_EXAMPLES_BUILD TRUE) string(TOLOWER ${PROJECT_NAME} project_name_lower) if(NOT TARGET examples) if(QT_BUILD_EXAMPLES_BY_DEFAULT) add_custom_target(examples ALL) else() add_custom_target(examples) endif() endif() if(NOT TARGET examples_${project_name_lower}) add_custom_target(examples_${project_name_lower}) add_dependencies(examples examples_${project_name_lower}) endif() include(ExternalProject) else() # This repo has not yet been updated to build examples in a separate # build from this main build, or we can't use that arrangement yet. # Build them directly as part of the main build instead for backward # compatibility. if(NOT BUILD_SHARED_LIBS) # Ordinarily, it would be an error to call return() from within a # macro(), but in this case we specifically want to return from the # caller's scope if we are doing a static build and the project # isn't building examples in a separate build from the main build. # Configuring static builds requires tools that are not available # until build time. return() endif() if(NOT QT_BUILD_EXAMPLES_BY_DEFAULT) set_directory_properties(PROPERTIES EXCLUDE_FROM_ALL TRUE) endif() endif() # TODO: Change this to TRUE when all examples in all repos are ported to use # qt_internal_add_example. # We shouldn't need to call qt_internal_set_up_build_dir_package_paths when # QT_IS_EXTERNAL_EXAMPLES_BUILD is TRUE. # Due to not all examples being ported, if we don't # call qt_internal_set_up_build_dir_package_paths -> set(QT_NO_CREATE_TARGETS TRUE) we'll get # CMake configuration errors saying we redefine Qt targets because we both build them and find # them as part of find_package. set(__qt_all_examples_ported_to_external_projects FALSE) # Examples that are built as part of the Qt build need to use the CMake config files from the # build dir, because they are not installed yet in a prefix build. # Prepending to CMAKE_PREFIX_PATH helps find the initial Qt6Config.cmake. # Prepending to QT_EXAMPLES_CMAKE_PREFIX_PATH helps find components of Qt6, because those # find_package calls use NO_DEFAULT_PATH, and thus CMAKE_PREFIX_PATH is ignored. # Prepending to CMAKE_FIND_ROOT_PATH ensures the components are found while cross-compiling # without setting CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH. if(NOT QT_IS_EXTERNAL_EXAMPLES_BUILD OR NOT __qt_all_examples_ported_to_external_projects) qt_internal_set_up_build_dir_package_paths() list(PREPEND CMAKE_FIND_ROOT_PATH "${QT_BUILD_DIR}") list(PREPEND QT_EXAMPLES_CMAKE_PREFIX_PATH "${QT_BUILD_DIR}/${INSTALL_LIBDIR}/cmake") endif() # Because CMAKE_INSTALL_RPATH is empty by default in the repo project, examples need to have # it set here, so they can run when installed. # This means that installed examples are not relocatable at the moment. We would need to # annotate where each example is installed to, to be able to derive a relative rpath, and it # seems there's no way to query such information from CMake itself. set(CMAKE_INSTALL_RPATH "${_default_install_rpath}") set(QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY TRUE) install(CODE " # Backup CMAKE_INSTALL_PREFIX because we're going to change it in each example subdirectory # and restore it after all examples are processed so that QtFooToolsAdditionalTargetInfo.cmake # files are installed into the original install prefix. set(_qt_internal_examples_cmake_install_prefix_backup \"\${CMAKE_INSTALL_PREFIX}\") ") endmacro() macro(qt_examples_build_end) # We use AUTOMOC/UIC/RCC in the examples. When the examples are part of the # main build rather than being built in their own separate project, make # sure we do not fail on a fresh Qt build (e.g. the moc binary won't exist # yet because it is created at build time). # This function gets all targets below this directory (excluding custom targets and aliases) function(get_all_targets _result _dir) get_property(_subdirs DIRECTORY "${_dir}" PROPERTY SUBDIRECTORIES) foreach(_subdir IN LISTS _subdirs) get_all_targets(${_result} "${_subdir}") endforeach() get_property(_sub_targets DIRECTORY "${_dir}" PROPERTY BUILDSYSTEM_TARGETS) set(_real_targets "") if(_sub_targets) foreach(__target IN LISTS _sub_targets) get_target_property(target_type ${__target} TYPE) if(NOT target_type STREQUAL "UTILITY" AND NOT target_type STREQUAL "ALIAS") list(APPEND _real_targets ${__target}) endif() endforeach() endif() set(${_result} ${${_result}} ${_real_targets} PARENT_SCOPE) endfunction() get_all_targets(targets "${CMAKE_CURRENT_SOURCE_DIR}") foreach(target ${targets}) qt_autogen_tools(${target} ENABLE_AUTOGEN_TOOLS "moc" "rcc") if(TARGET Qt::Widgets) qt_autogen_tools(${target} ENABLE_AUTOGEN_TOOLS "uic") endif() endforeach() install(CODE " # Restore backed up CMAKE_INSTALL_PREFIX. set(CMAKE_INSTALL_PREFIX \"\${_qt_internal_examples_cmake_install_prefix_backup}\") ") endmacro() function(qt_internal_add_example subdir) if(NOT QT_IS_EXTERNAL_EXAMPLES_BUILD) qt_internal_add_example_in_tree(${ARGV}) else() qt_internal_add_example_external_project(${ARGV}) endif() endfunction() # Use old non-ExternalProject approach, aka build in-tree with the Qt build. function(qt_internal_add_example_in_tree subdir) file(RELATIVE_PATH example_rel_path "${QT_EXAMPLE_BASE_DIR}" "${CMAKE_CURRENT_SOURCE_DIR}/${subdir}") # Unset the default CMAKE_INSTALL_PREFIX that's generated in # ${CMAKE_CURRENT_BINARY_DIR}/cmake_install.cmake # so we can override it with a different value in # ${CMAKE_CURRENT_BINARY_DIR}/${subdir}/cmake_install.cmake # install(CODE " # Unset the CMAKE_INSTALL_PREFIX in the current cmake_install.cmake file so that it can be # overridden in the included add_subdirectory-specific cmake_install.cmake files instead. unset(CMAKE_INSTALL_PREFIX) ") # Override the install prefix in the subdir cmake_install.cmake, so that # relative install(TARGETS DESTINATION) calls in example projects install where we tell them to. # Allow customizing the installation path of the examples. Will be used in CI. if(QT_INTERNAL_EXAMPLES_INSTALL_PREFIX) set(qt_example_install_prefix "${QT_INTERNAL_EXAMPLES_INSTALL_PREFIX}") else() set(qt_example_install_prefix "${CMAKE_INSTALL_PREFIX}/${INSTALL_EXAMPLESDIR}") endif() file(TO_CMAKE_PATH "${qt_example_install_prefix}" qt_example_install_prefix) set(CMAKE_INSTALL_PREFIX "${qt_example_install_prefix}/${example_rel_path}") # Make sure unclean example projects have their INSTALL_EXAMPLEDIR set to "." # Won't have any effect on example projects that don't use INSTALL_EXAMPLEDIR. # This plus the install prefix above takes care of installing examples where we want them to # be installed, while allowing us to remove INSTALL_EXAMPLEDIR code in each example # incrementally. # TODO: Remove once all repositories use qt_internal_add_example instead of add_subdirectory. set(QT_INTERNAL_SET_EXAMPLE_INSTALL_DIR_TO_DOT ON) add_subdirectory(${subdir} ${ARGN}) endfunction() function(qt_internal_add_example_external_project subdir) set(options "") set(singleOpts NAME) set(multiOpts "") cmake_parse_arguments(PARSE_ARGV 1 arg "${options}" "${singleOpts}" "${multiOpts}") file(RELATIVE_PATH example_rel_path "${QT_EXAMPLE_BASE_DIR}" "${CMAKE_CURRENT_SOURCE_DIR}/${subdir}") if(NOT arg_NAME) set(arg_NAME "${subdir}") # qtdeclarative has calls like qt_internal_add_example(imagine/automotive) # so passing a nested subdirectory. Custom targets (and thus ExternalProjects) can't contain # slashes, so extract the last part of the path to be used as a name. if(arg_NAME MATCHES "/") string(REPLACE "/" ";" exploded_path "${arg_NAME}") list(POP_BACK exploded_path last_dir) if(NOT last_dir) message(FATAL_ERROR "Example subdirectory must have a name.") else() set(arg_NAME "${last_dir}") endif() endif() endif() # Likely a clash with an example subdir ExternalProject custom target of the same name. if(TARGET "${arg_NAME}") string(SHA1 rel_path_hash "${example_rel_path}") string(SUBSTRING "${rel_path_hash}" 0 4 short_hash) set(arg_NAME "${arg_NAME}-${short_hash}") endif() # TODO: Fix example builds when using Conan / install prefixes are different for each repo. if(QT_SUPERBUILD OR QtBase_BINARY_DIR) # When doing a top-level build or when building qtbase, # always use the Config file from the current build directory, even for prefix builds. # We strive to allow building examples without installing Qt first, which means we can't # use the install or staging Config files. set(qt_prefixes "${QT_BUILD_DIR}") set(qt_cmake_dir "${QT_CONFIG_BUILD_DIR}/${QT_CMAKE_EXPORT_NAMESPACE}") else() # This is a per-repo build that isn't the qtbase repo, so we know that # qtbase was found via find_package() and Qt6_DIR must be set set(qt_cmake_dir "${${QT_CMAKE_EXPORT_NAMESPACE}_DIR}") # In a prefix build of a non-qtbase repo, we want to pick up the installed Config files # for all repos except the one that is currently built. For the repo that is currently # built, we pick up the Config files from the current repo build dir instead. # For non-prefix builds, there's only one prefix, the main build dir. # Both are handled by this assignment. set(qt_prefixes "${QT_BUILD_DIR}") # Appending to QT_ADDITIONAL_PACKAGES_PREFIX_PATH helps find Qt6 components in # non-qtbase prefix builds because we use NO_DEFAULT_PATH in find_package calls. # It also handles the cross-compiling scenario where we need to adjust both the root path # and prefixes, with the prefixes containing lib/cmake. This leverages the infrastructure # previously added for Conan. list(APPEND QT_ADDITIONAL_PACKAGES_PREFIX_PATH ${qt_prefixes}) # In a prefix build, look up all repo Config files in the install prefix, # except for the current repo, which will look in the build dir (handled above). if(QT_WILL_INSTALL) list(APPEND qt_prefixes "${QT6_INSTALL_PREFIX}") endif() endif() set(vars_to_pass_if_defined) set(var_defs) if(QT_HOST_PATH OR CMAKE_CROSSCOMPILING) list(APPEND var_defs -DCMAKE_TOOLCHAIN_FILE:FILEPATH=${qt_cmake_dir}/qt.toolchain.cmake ) else() list(PREPEND CMAKE_PREFIX_PATH ${qt_prefixes}) # Setting CMAKE_SYSTEM_NAME affects CMAKE_CROSSCOMPILING, even if it is # set to the same as the host, so it should only be set if it is different. # See https://gitlab.kitware.com/cmake/cmake/-/issues/21744 if(NOT DEFINED CMAKE_TOOLCHAIN_FILE AND NOT CMAKE_SYSTEM_NAME STREQUAL CMAKE_HOST_SYSTEM_NAME) list(APPEND vars_to_pass_if_defined CMAKE_SYSTEM_NAME:STRING) endif() endif() # In multi-config mode by default we exclude building tools for configs other than the main one. # Trying to build an example in a non-default config using the non-installed # QtFooConfig.cmake files would error out saying moc is not found. # Make sure to build examples only with the main config. # When users build an example against an installed Qt they won't have this problem because # the generated non-main QtFooTargets-$.cmake file is empty and doesn't advertise # a tool that is not there. if(QT_GENERATOR_IS_MULTI_CONFIG) set(CMAKE_CONFIGURATION_TYPES "${QT_MULTI_CONFIG_FIRST_CONFIG}") endif() # We need to pass the modified CXX flags of the parent project so that using sccache works # properly and doesn't error out due to concurrent access to the pdb files. # See qt_internal_set_up_config_optimizations_like_in_qmake, "/Zi" "/Z7". if(MSVC AND QT_FEATURE_msvc_obj_debug_info) qt_internal_get_enabled_languages_for_flag_manipulation(enabled_languages) set(configs RELWITHDEBINFO DEBUG) foreach(lang ${enabled_languages}) foreach(config ${configs}) set(flag_var_name "CMAKE_${lang}_FLAGS_${config}") list(APPEND vars_to_pass_if_defined "${flag_var_name}:STRING") endforeach() endforeach() endif() # When cross-compiling for a qemu target in our CI, we source an environment script # that sets environment variables like CC and CXX. These are parsed by CMake on initial # configuration to populate the cache vars CMAKE_${lang}_COMPILER. # If the environment variable specified not only the compiler path, but also a list of flags # to pass to the compiler, CMake parses those out into a separate CMAKE_${lang}_COMPILER_ARG1 # cache variable. In such a case, we want to ensure that the external project also sees those # flags. # Unfortunately we can't do that by simply forwarding CMAKE_${lang}_COMPILER_ARG1 to the EP # because it breaks the compiler identification try_compile call, it simply doesn't consider # the cache var. From what I could gather, it's a limitation of try_compile and the list # of variables it considers for forwarding. # To fix this case, we ensure not to pass either cache variable, and let the external project # and its compiler identification try_compile project pick up the compiler and the flags # from the environment variables instead. foreach(lang_as_env_var CC CXX OBJC OBJCXX) if(lang_as_env_var STREQUAL "CC") set(lang_as_cache_var "C") else() set(lang_as_cache_var "${lang_as_env_var}") endif() set(lang_env_value "$ENV{${lang_as_env_var}}") if(lang_env_value AND CMAKE_${lang_as_cache_var}_COMPILER AND CMAKE_${lang_as_cache_var}_COMPILER_ARG1) # The compiler environment variable is set and specifies a list of extra flags, don't # forward the compiler cache vars and rely on the environment variable to be picked up # instead. else() list(APPEND vars_to_pass_if_defined "CMAKE_${lang_as_cache_var}_COMPILER:STRING") endif() endforeach() unset(lang_as_env_var) unset(lang_as_cache_var) unset(lang_env_value) list(APPEND vars_to_pass_if_defined CMAKE_BUILD_TYPE:STRING CMAKE_CONFIGURATION_TYPES:STRING CMAKE_PREFIX_PATH:STRING QT_EXAMPLES_CMAKE_PREFIX_PATH:STRING QT_ADDITIONAL_PACKAGES_PREFIX_PATH:STRING CMAKE_FIND_ROOT_PATH:STRING BUILD_SHARED_LIBS:BOOL CMAKE_OSX_ARCHITECTURES:STRING CMAKE_OSX_DEPLOYMENT_TARGET:STRING CMAKE_XCODE_ATTRIBUTE_CODE_SIGNING_ALLOWED:BOOL CMAKE_XCODE_ATTRIBUTE_ONLY_ACTIVE_ARCH:BOOL CMAKE_C_COMPILER_LAUNCHER:STRING CMAKE_CXX_COMPILER_LAUNCHER:STRING CMAKE_OBJC_COMPILER_LAUNCHER:STRING CMAKE_OBJCXX_COMPILER_LAUNCHER:STRING ) foreach(var_with_type IN LISTS vars_to_pass_if_defined) string(REPLACE ":" ";" key_as_list "${var_with_type}") list(GET key_as_list 0 var) if(NOT DEFINED ${var}) continue() endif() # Preserve lists string(REPLACE ";" "$" varForGenex "${${var}}") list(APPEND var_defs -D${var_with_type}=${varForGenex}) endforeach() if(QT_INTERNAL_VERBOSE_EXAMPLES) list(APPEND var_defs -DCMAKE_MESSAGE_LOG_LEVEL:STRING=DEBUG) list(APPEND var_defs -DCMAKE_AUTOGEN_VERBOSE:BOOL=TRUE) endif() set(deps "") list(REMOVE_DUPLICATES QT_EXAMPLE_DEPENDENCIES) foreach(dep IN LISTS QT_EXAMPLE_DEPENDENCIES) if(TARGET ${dep}) list(APPEND deps ${dep}) endif() endforeach() set(independent_args) cmake_policy(PUSH) if(POLICY CMP0114) set(independent_args INDEPENDENT TRUE) cmake_policy(SET CMP0114 NEW) endif() # The USES_TERMINAL_BUILD setting forces the build step to the console pool # when using Ninja. This has two benefits: # # - You see build output as it is generated instead of at the end of the # build step. # - Only one task can use the console pool at a time, so it effectively # serializes all example build steps, thereby preventing CPU # over-commitment. # # If the loss of interactivity is not so important, one can allow CPU # over-commitment for Ninja builds. This may result in better throughput, # but is not allowed by default because it can make a machine almost # unusable while a compilation is running. set(terminal_args USES_TERMINAL_BUILD TRUE) if(CMAKE_GENERATOR MATCHES "Ninja") option(QT_BUILD_EXAMPLES_WITH_CPU_OVERCOMMIT "Allow CPU over-commitment when building examples (Ninja only)" ) if(QT_BUILD_EXAMPLES_WITH_CPU_OVERCOMMIT) set(terminal_args) endif() endif() # QT_EXAMPLE_INSTALL_MARKER # The goal is to install each example project into a directory that keeps the example source dir # hierarchy, without polluting the example projects with dirty INSTALL_EXAMPLEDIR and # INSTALL_EXAMPLESDIR usage. # E.g. ensure qtbase/examples/widgets/widgets/wiggly is installed to # $qt_example_install_prefix/examples/widgets/widgets/wiggly/wiggly.exe # $qt_example_install_prefix defaults to ${CMAKE_INSTALL_PREFIX}/${INSTALL_EXAMPLEDIR} # but can also be set to a custom location. # This needs to work both: # - when using ExternalProject to build examples # - when examples are built in-tree as part of Qt (no ExternalProject). # The reason we want to support the latter is for nicer IDE integration: a can developer can # work with a Qt repo and its examples using the same build dir. # # In both case we have to ensure examples are not accidentally installed to $qt_prefix/bin or # similar. # # Example projects installation matrix. # 1) ExternalProject + unclean example install rules (INSTALL_EXAMPLEDIR is set) => # use _qt_internal_override_example_install_dir_to_dot + ExternalProject_Add's INSTALL_DIR # using relative_dir from QT_EXAMPLE_BASE_DIR to example_source_dir # # 2) ExternalProject + clean example install rules => # use ExternalProject_Add's INSTALL_DIR using relative_dir from QT_EXAMPLE_BASE_DIR to # example_source_dir, _qt_internal_override_example_install_dir_to_dot would be a no-op # # 3) in-tree + unclean example install rules (INSTALL_EXAMPLEDIR is set) # + # 4) in-tree + clean example install rules => # ensure CMAKE_INSTALL_PREFIX is unset in parent cmake_install.cmake file, set non-cache # CMAKE_INSTALL_PREFIX using relative_dir from QT_EXAMPLE_BASE_DIR to # example_source_dir, use _qt_internal_override_example_install_dir_to_dot to ensure # INSTALL_EXAMPLEDIR does not interfere. # Allow customizing the installation path of the examples. Will be used in CI. if(QT_INTERNAL_EXAMPLES_INSTALL_PREFIX) set(qt_example_install_prefix "${QT_INTERNAL_EXAMPLES_INSTALL_PREFIX}") else() set(qt_example_install_prefix "${CMAKE_INSTALL_PREFIX}/${INSTALL_EXAMPLESDIR}") endif() file(TO_CMAKE_PATH "${qt_example_install_prefix}" qt_example_install_prefix) set(example_install_prefix "${qt_example_install_prefix}/${example_rel_path}") set(ep_binary_dir "${CMAKE_CURRENT_BINARY_DIR}/${subdir}") set(build_command "") if(QT_INTERNAL_VERBOSE_EXAMPLES AND CMAKE_GENERATOR MATCHES "Ninja") set(build_command BUILD_COMMAND "${CMAKE_COMMAND}" --build "." -- -v) endif() ExternalProject_Add(${arg_NAME} EXCLUDE_FROM_ALL TRUE SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/${subdir}" PREFIX "${CMAKE_CURRENT_BINARY_DIR}/${subdir}-ep" STAMP_DIR "${CMAKE_CURRENT_BINARY_DIR}/${subdir}-ep/stamp" BINARY_DIR "${ep_binary_dir}" INSTALL_DIR "${example_install_prefix}" INSTALL_COMMAND "" ${build_command} TEST_COMMAND "" DEPENDS ${deps} CMAKE_CACHE_ARGS ${var_defs} -DCMAKE_INSTALL_PREFIX:STRING= -DQT_INTERNAL_SET_EXAMPLE_INSTALL_DIR_TO_DOT:BOOL=TRUE ${terminal_args} ) # Install the examples when the the user runs 'make install', and not at build time (which is # the default for ExternalProjects). install(CODE "\ # Install example from inside ExternalProject into the main build's install prefix. execute_process( COMMAND \"${CMAKE_COMMAND}\" --build \"${ep_binary_dir}\" --target install ) ") # Force configure step to re-run after we configure the main project set(reconfigure_check_file ${CMAKE_CURRENT_BINARY_DIR}/reconfigure_${arg_NAME}.txt) file(TOUCH ${reconfigure_check_file}) ExternalProject_Add_Step(${arg_NAME} reconfigure-check DEPENDERS configure DEPENDS ${reconfigure_check_file} ${independent_args} ) # Create an apk external project step and custom target that invokes the apk target # within the external project. # Make the global apk target depend on that custom target. if(ANDROID) ExternalProject_Add_Step(${arg_NAME} apk COMMAND ${CMAKE_COMMAND} --build --target apk DEPENDEES configure EXCLUDE_FROM_MAIN YES ${terminal_args} ) ExternalProject_Add_StepTargets(${arg_NAME} apk) if(TARGET apk) add_dependencies(apk ${arg_NAME}-apk) endif() endif() cmake_policy(POP) string(TOLOWER ${PROJECT_NAME} project_name_lower) add_dependencies(examples_${project_name_lower} ${arg_NAME}) endfunction() if ("STANDALONE_TEST" IN_LIST Qt6BuildInternals_FIND_COMPONENTS) include(${CMAKE_CURRENT_LIST_DIR}/QtStandaloneTestTemplateProject/Main.cmake) if (NOT PROJECT_VERSION_MAJOR) get_property(_qt_major_version TARGET ${QT_CMAKE_EXPORT_NAMESPACE}::Core PROPERTY INTERFACE_QT_MAJOR_VERSION) set(PROJECT_VERSION ${Qt${_qt_major_version}Core_VERSION}) string(REPLACE "." ";" _qt_core_version_list ${PROJECT_VERSION}) list(GET _qt_core_version_list 0 PROJECT_VERSION_MAJOR) list(GET _qt_core_version_list 1 PROJECT_VERSION_MINOR) list(GET _qt_core_version_list 2 PROJECT_VERSION_PATCH) endif() endif() function(qt_internal_static_link_order_test) # The CMake versions greater than 3.21 take care about the resource object files order in a # linker line, it's expected that all object files are located at the beginning of the linker # line. # No need to run the test. if(CMAKE_VERSION VERSION_LESS 3.21) __qt_internal_check_link_order_matters(link_order_matters) if(link_order_matters) set(summary_message "no") else() set(summary_message "yes") endif() else() set(summary_message "yes") endif() qt_configure_add_summary_entry(TYPE "message" ARGS "Linker can resolve circular dependencies" MESSAGE "${summary_message}" ) endfunction() function(qt_internal_check_cmp0099_available) # Don't care about CMP0099 in CMake versions greater than or equal to 3.21 if(CMAKE_VERSION VERSION_GREATER_EQUAL 3.21) return() endif() __qt_internal_check_cmp0099_available(result) if(result) set(summary_message "yes") else() set(summary_message "no") endif() qt_configure_add_summary_entry(TYPE "message" ARGS "CMake policy CMP0099 is supported" MESSAGE "${summary_message}" ) endfunction() function(qt_internal_run_common_config_tests) qt_configure_add_summary_section(NAME "Common build options") qt_internal_static_link_order_test() qt_internal_check_cmp0099_available() qt_configure_end_summary_section() endfunction()