169a40d511
this moves us another step towards the "outer" configure doing just minimal bootstrapping of qmake. a challenge here was that so far, qmake itself needed qconfig.cpp. this was replaced by usage of a qt.conf file instead of compiled-in values. however, to make the executable still self-contained, that qt.conf is embedded into it (by simple appending of a fixed signature and the text file). the qmake with the embedded qt.conf is not used for the qt build itself, which instead relies on the qt.conf in bin/ as before. however, due to the missing built-in values, this file now needs to contain more information than before. but except for a minimal version that is needed to start up qmake/configure at all, that file is now also generated with qmake. as some of the newly set up properties are subsequently used by configure itself, qmake gains a (deliberately undocumented) function to reload the qt.conf after it's fully populated. unlike the old implementations, this one doesn't emit redundant qt.conf entries which match the hard-coded fallbacks. omitting them leads to leaner files which are more comprehensible. Started-by: Paolo Angelelli <paolo.angelelli@qt.io> Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6 Reviewed-by: Jake Petroules <jake.petroules@qt.io>
2031 lines
78 KiB
C++
2031 lines
78 KiB
C++
/****************************************************************************
|
|
**
|
|
** Copyright (C) 2016 The Qt Company Ltd.
|
|
** Contact: https://www.qt.io/licensing/
|
|
**
|
|
** This file is part of the qmake application of the Qt Toolkit.
|
|
**
|
|
** $QT_BEGIN_LICENSE:GPL-EXCEPT$
|
|
** Commercial License Usage
|
|
** Licensees holding valid commercial Qt licenses may use this file in
|
|
** accordance with the commercial license agreement provided with the
|
|
** Software or, alternatively, in accordance with the terms contained in
|
|
** a written agreement between you and The Qt Company. For licensing terms
|
|
** and conditions see https://www.qt.io/terms-conditions. For further
|
|
** information use the contact form at https://www.qt.io/contact-us.
|
|
**
|
|
** GNU General Public License Usage
|
|
** Alternatively, this file may be used under the terms of the GNU
|
|
** General Public License version 3 as published by the Free Software
|
|
** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT
|
|
** included in the packaging of this file. Please review the following
|
|
** information to ensure the GNU General Public License requirements will
|
|
** be met: https://www.gnu.org/licenses/gpl-3.0.html.
|
|
**
|
|
** $QT_END_LICENSE$
|
|
**
|
|
****************************************************************************/
|
|
|
|
#include "qmakeevaluator.h"
|
|
|
|
#include "qmakeevaluator_p.h"
|
|
#include "qmakeglobals.h"
|
|
#include "qmakeparser.h"
|
|
#include "qmakevfs.h"
|
|
#include "ioutils.h"
|
|
|
|
#include <qbytearray.h>
|
|
#include <qdir.h>
|
|
#include <qfile.h>
|
|
#include <qfileinfo.h>
|
|
#include <qlist.h>
|
|
#include <qregexp.h>
|
|
#include <qset.h>
|
|
#include <qstringlist.h>
|
|
#include <qtextstream.h>
|
|
#if QT_VERSION >= QT_VERSION_CHECK(5, 0, 0)
|
|
# include <qjsondocument.h>
|
|
# include <qjsonobject.h>
|
|
# include <qjsonarray.h>
|
|
#endif
|
|
#ifdef PROEVALUATOR_THREAD_SAFE
|
|
# include <qthreadpool.h>
|
|
#endif
|
|
|
|
#include <algorithm>
|
|
|
|
#ifdef Q_OS_UNIX
|
|
#include <time.h>
|
|
#include <utime.h>
|
|
#include <errno.h>
|
|
#include <unistd.h>
|
|
#include <signal.h>
|
|
#include <sys/wait.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/utsname.h>
|
|
#else
|
|
#include <windows.h>
|
|
#endif
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
|
|
#ifdef Q_OS_WIN32
|
|
#define QT_POPEN _popen
|
|
#define QT_POPEN_READ "rb"
|
|
#define QT_PCLOSE _pclose
|
|
#else
|
|
#define QT_POPEN popen
|
|
#define QT_POPEN_READ "r"
|
|
#define QT_PCLOSE pclose
|
|
#endif
|
|
|
|
using namespace QMakeInternal;
|
|
|
|
QT_BEGIN_NAMESPACE
|
|
|
|
#define fL1S(s) QString::fromLatin1(s)
|
|
|
|
enum ExpandFunc {
|
|
E_INVALID = 0, E_MEMBER, E_STR_MEMBER, E_FIRST, E_TAKE_FIRST, E_LAST, E_TAKE_LAST,
|
|
E_SIZE, E_STR_SIZE, E_CAT, E_FROMFILE, E_EVAL, E_LIST, E_SPRINTF, E_FORMAT_NUMBER,
|
|
E_NUM_ADD, E_JOIN, E_SPLIT, E_BASENAME, E_DIRNAME, E_SECTION,
|
|
E_FIND, E_SYSTEM, E_UNIQUE, E_SORTED, E_REVERSE, E_QUOTE, E_ESCAPE_EXPAND,
|
|
E_UPPER, E_LOWER, E_TITLE, E_FILES, E_PROMPT, E_RE_ESCAPE, E_VAL_ESCAPE,
|
|
E_REPLACE, E_SORT_DEPENDS, E_RESOLVE_DEPENDS, E_ENUMERATE_VARS,
|
|
E_SHADOWED, E_ABSOLUTE_PATH, E_RELATIVE_PATH, E_CLEAN_PATH,
|
|
E_SYSTEM_PATH, E_SHELL_PATH, E_SYSTEM_QUOTE, E_SHELL_QUOTE, E_GETENV
|
|
};
|
|
|
|
enum TestFunc {
|
|
T_INVALID = 0, T_REQUIRES, T_GREATERTHAN, T_LESSTHAN, T_EQUALS,
|
|
T_EXISTS, T_EXPORT, T_CLEAR, T_UNSET, T_EVAL, T_CONFIG, T_SYSTEM,
|
|
T_DEFINED, T_DISCARD_FROM, T_CONTAINS, T_INFILE,
|
|
T_COUNT, T_ISEMPTY, T_PARSE_JSON, T_INCLUDE, T_LOAD, T_DEBUG, T_LOG, T_MESSAGE, T_WARNING, T_ERROR, T_IF,
|
|
T_MKPATH, T_WRITE_FILE, T_TOUCH, T_CACHE, T_RELOAD_PROPERTIES
|
|
};
|
|
|
|
void QMakeEvaluator::initFunctionStatics()
|
|
{
|
|
static const struct {
|
|
const char * const name;
|
|
const ExpandFunc func;
|
|
} expandInits[] = {
|
|
{ "member", E_MEMBER },
|
|
{ "str_member", E_STR_MEMBER },
|
|
{ "first", E_FIRST },
|
|
{ "take_first", E_TAKE_FIRST },
|
|
{ "last", E_LAST },
|
|
{ "take_last", E_TAKE_LAST },
|
|
{ "size", E_SIZE },
|
|
{ "str_size", E_STR_SIZE },
|
|
{ "cat", E_CAT },
|
|
{ "fromfile", E_FROMFILE },
|
|
{ "eval", E_EVAL },
|
|
{ "list", E_LIST },
|
|
{ "sprintf", E_SPRINTF },
|
|
{ "format_number", E_FORMAT_NUMBER },
|
|
{ "num_add", E_NUM_ADD },
|
|
{ "join", E_JOIN },
|
|
{ "split", E_SPLIT },
|
|
{ "basename", E_BASENAME },
|
|
{ "dirname", E_DIRNAME },
|
|
{ "section", E_SECTION },
|
|
{ "find", E_FIND },
|
|
{ "system", E_SYSTEM },
|
|
{ "unique", E_UNIQUE },
|
|
{ "sorted", E_SORTED },
|
|
{ "reverse", E_REVERSE },
|
|
{ "quote", E_QUOTE },
|
|
{ "escape_expand", E_ESCAPE_EXPAND },
|
|
{ "upper", E_UPPER },
|
|
{ "lower", E_LOWER },
|
|
{ "title", E_TITLE },
|
|
{ "re_escape", E_RE_ESCAPE },
|
|
{ "val_escape", E_VAL_ESCAPE },
|
|
{ "files", E_FILES },
|
|
{ "prompt", E_PROMPT },
|
|
{ "replace", E_REPLACE },
|
|
{ "sort_depends", E_SORT_DEPENDS },
|
|
{ "resolve_depends", E_RESOLVE_DEPENDS },
|
|
{ "enumerate_vars", E_ENUMERATE_VARS },
|
|
{ "shadowed", E_SHADOWED },
|
|
{ "absolute_path", E_ABSOLUTE_PATH },
|
|
{ "relative_path", E_RELATIVE_PATH },
|
|
{ "clean_path", E_CLEAN_PATH },
|
|
{ "system_path", E_SYSTEM_PATH },
|
|
{ "shell_path", E_SHELL_PATH },
|
|
{ "system_quote", E_SYSTEM_QUOTE },
|
|
{ "shell_quote", E_SHELL_QUOTE },
|
|
{ "getenv", E_GETENV },
|
|
};
|
|
statics.expands.reserve((int)(sizeof(expandInits)/sizeof(expandInits[0])));
|
|
for (unsigned i = 0; i < sizeof(expandInits)/sizeof(expandInits[0]); ++i)
|
|
statics.expands.insert(ProKey(expandInits[i].name), expandInits[i].func);
|
|
|
|
static const struct {
|
|
const char * const name;
|
|
const TestFunc func;
|
|
} testInits[] = {
|
|
{ "requires", T_REQUIRES },
|
|
{ "greaterThan", T_GREATERTHAN },
|
|
{ "lessThan", T_LESSTHAN },
|
|
{ "equals", T_EQUALS },
|
|
{ "isEqual", T_EQUALS },
|
|
{ "exists", T_EXISTS },
|
|
{ "export", T_EXPORT },
|
|
{ "clear", T_CLEAR },
|
|
{ "unset", T_UNSET },
|
|
{ "eval", T_EVAL },
|
|
{ "CONFIG", T_CONFIG },
|
|
{ "if", T_IF },
|
|
{ "isActiveConfig", T_CONFIG },
|
|
{ "system", T_SYSTEM },
|
|
{ "discard_from", T_DISCARD_FROM },
|
|
{ "defined", T_DEFINED },
|
|
{ "contains", T_CONTAINS },
|
|
{ "infile", T_INFILE },
|
|
{ "count", T_COUNT },
|
|
{ "isEmpty", T_ISEMPTY },
|
|
#if QT_VERSION >= QT_VERSION_CHECK(5, 0, 0)
|
|
{ "parseJson", T_PARSE_JSON },
|
|
#endif
|
|
{ "load", T_LOAD },
|
|
{ "include", T_INCLUDE },
|
|
{ "debug", T_DEBUG },
|
|
{ "log", T_LOG },
|
|
{ "message", T_MESSAGE },
|
|
{ "warning", T_WARNING },
|
|
{ "error", T_ERROR },
|
|
{ "mkpath", T_MKPATH },
|
|
{ "write_file", T_WRITE_FILE },
|
|
{ "touch", T_TOUCH },
|
|
{ "cache", T_CACHE },
|
|
{ "reload_properties", T_RELOAD_PROPERTIES },
|
|
};
|
|
statics.functions.reserve((int)(sizeof(testInits)/sizeof(testInits[0])));
|
|
for (unsigned i = 0; i < sizeof(testInits)/sizeof(testInits[0]); ++i)
|
|
statics.functions.insert(ProKey(testInits[i].name), testInits[i].func);
|
|
}
|
|
|
|
static bool isTrue(const ProString &str)
|
|
{
|
|
return !str.compare(statics.strtrue, Qt::CaseInsensitive) || str.toInt();
|
|
}
|
|
|
|
bool
|
|
QMakeEvaluator::getMemberArgs(const ProKey &func, int srclen, const ProStringList &args,
|
|
int *start, int *end)
|
|
{
|
|
*start = 0, *end = 0;
|
|
if (args.count() >= 2) {
|
|
bool ok = true;
|
|
const ProString &start_str = args.at(1);
|
|
*start = start_str.toInt(&ok);
|
|
if (!ok) {
|
|
if (args.count() == 2) {
|
|
int dotdot = start_str.indexOf(statics.strDotDot);
|
|
if (dotdot != -1) {
|
|
*start = start_str.left(dotdot).toInt(&ok);
|
|
if (ok)
|
|
*end = start_str.mid(dotdot+2).toInt(&ok);
|
|
}
|
|
}
|
|
if (!ok) {
|
|
evalError(fL1S("%1() argument 2 (start) '%2' invalid.")
|
|
.arg(func.toQString(m_tmp1), start_str.toQString(m_tmp2)));
|
|
return false;
|
|
}
|
|
} else {
|
|
*end = *start;
|
|
if (args.count() == 3)
|
|
*end = args.at(2).toInt(&ok);
|
|
if (!ok) {
|
|
evalError(fL1S("%1() argument 3 (end) '%2' invalid.")
|
|
.arg(func.toQString(m_tmp1), args.at(2).toQString(m_tmp2)));
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
if (*start < 0)
|
|
*start += srclen;
|
|
if (*end < 0)
|
|
*end += srclen;
|
|
if (*start < 0 || *start >= srclen || *end < 0 || *end >= srclen)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
#if defined(Q_OS_WIN) && defined(PROEVALUATOR_FULL)
|
|
static QString windowsErrorCode()
|
|
{
|
|
wchar_t *string = 0;
|
|
FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER|FORMAT_MESSAGE_FROM_SYSTEM,
|
|
NULL,
|
|
GetLastError(),
|
|
MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
|
|
(LPWSTR)&string,
|
|
0,
|
|
NULL);
|
|
QString ret = QString::fromWCharArray(string);
|
|
LocalFree((HLOCAL)string);
|
|
return ret.trimmed();
|
|
}
|
|
#endif
|
|
|
|
QString
|
|
QMakeEvaluator::quoteValue(const ProString &val)
|
|
{
|
|
QString ret;
|
|
ret.reserve(val.size());
|
|
const QChar *chars = val.constData();
|
|
bool quote = val.isEmpty();
|
|
bool escaping = false;
|
|
for (int i = 0, l = val.size(); i < l; i++) {
|
|
QChar c = chars[i];
|
|
ushort uc = c.unicode();
|
|
if (uc < 32) {
|
|
if (!escaping) {
|
|
escaping = true;
|
|
ret += QLatin1String("$$escape_expand(");
|
|
}
|
|
switch (uc) {
|
|
case '\r':
|
|
ret += QLatin1String("\\\\r");
|
|
break;
|
|
case '\n':
|
|
ret += QLatin1String("\\\\n");
|
|
break;
|
|
case '\t':
|
|
ret += QLatin1String("\\\\t");
|
|
break;
|
|
default:
|
|
ret += QString::fromLatin1("\\\\x%1").arg(uc, 2, 16, QLatin1Char('0'));
|
|
break;
|
|
}
|
|
} else {
|
|
if (escaping) {
|
|
escaping = false;
|
|
ret += QLatin1Char(')');
|
|
}
|
|
switch (uc) {
|
|
case '\\':
|
|
ret += QLatin1String("\\\\");
|
|
break;
|
|
case '"':
|
|
ret += QLatin1String("\\\"");
|
|
break;
|
|
case '\'':
|
|
ret += QLatin1String("\\'");
|
|
break;
|
|
case '$':
|
|
ret += QLatin1String("\\$");
|
|
break;
|
|
case '#':
|
|
ret += QLatin1String("$${LITERAL_HASH}");
|
|
break;
|
|
case 32:
|
|
quote = true;
|
|
Q_FALLTHROUGH();
|
|
default:
|
|
ret += c;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (escaping)
|
|
ret += QLatin1Char(')');
|
|
if (quote) {
|
|
ret.prepend(QLatin1Char('"'));
|
|
ret.append(QLatin1Char('"'));
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#if QT_VERSION >= QT_VERSION_CHECK(5, 0, 0)
|
|
static void addJsonValue(const QJsonValue &value, const QString &keyPrefix, ProValueMap *map);
|
|
|
|
static void insertJsonKeyValue(const QString &key, const QStringList &values, ProValueMap *map)
|
|
{
|
|
map->insert(ProKey(key), ProStringList(values));
|
|
}
|
|
|
|
static void addJsonArray(const QJsonArray &array, const QString &keyPrefix, ProValueMap *map)
|
|
{
|
|
QStringList keys;
|
|
const int size = array.count();
|
|
keys.reserve(size);
|
|
for (int i = 0; i < size; ++i) {
|
|
const QString number = QString::number(i);
|
|
keys.append(number);
|
|
addJsonValue(array.at(i), keyPrefix + number, map);
|
|
}
|
|
insertJsonKeyValue(keyPrefix + QLatin1String("_KEYS_"), keys, map);
|
|
}
|
|
|
|
static void addJsonObject(const QJsonObject &object, const QString &keyPrefix, ProValueMap *map)
|
|
{
|
|
QStringList keys;
|
|
keys.reserve(object.size());
|
|
for (auto it = object.begin(), end = object.end(); it != end; ++it) {
|
|
const QString key = it.key();
|
|
keys.append(key);
|
|
addJsonValue(it.value(), keyPrefix + key, map);
|
|
}
|
|
insertJsonKeyValue(keyPrefix + QLatin1String("_KEYS_"), keys, map);
|
|
}
|
|
|
|
static void addJsonValue(const QJsonValue &value, const QString &keyPrefix, ProValueMap *map)
|
|
{
|
|
switch (value.type()) {
|
|
case QJsonValue::Bool:
|
|
insertJsonKeyValue(keyPrefix, QStringList() << (value.toBool() ? QLatin1String("true") : QLatin1String("false")), map);
|
|
break;
|
|
case QJsonValue::Double:
|
|
insertJsonKeyValue(keyPrefix, QStringList() << QString::number(value.toDouble()), map);
|
|
break;
|
|
case QJsonValue::String:
|
|
insertJsonKeyValue(keyPrefix, QStringList() << value.toString(), map);
|
|
break;
|
|
case QJsonValue::Array:
|
|
addJsonArray(value.toArray(), keyPrefix + QLatin1Char('.'), map);
|
|
break;
|
|
case QJsonValue::Object:
|
|
addJsonObject(value.toObject(), keyPrefix + QLatin1Char('.'), map);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct ErrorPosition {
|
|
int line;
|
|
int column;
|
|
};
|
|
|
|
static ErrorPosition calculateErrorPosition(const QByteArray &json, int offset)
|
|
{
|
|
ErrorPosition pos = { 0, 0 };
|
|
offset--; // offset is 1-based, switching to 0-based
|
|
for (int i = 0; i < offset; ++i) {
|
|
switch (json.at(i)) {
|
|
case '\n':
|
|
pos.line++;
|
|
pos.column = 0;
|
|
break;
|
|
case '\r':
|
|
break;
|
|
case '\t':
|
|
pos.column = (pos.column + 8) & ~7;
|
|
break;
|
|
default:
|
|
pos.column++;
|
|
break;
|
|
}
|
|
}
|
|
// Lines and columns in text editors are 1-based:
|
|
pos.line++;
|
|
pos.column++;
|
|
return pos;
|
|
}
|
|
|
|
QMakeEvaluator::VisitReturn QMakeEvaluator::parseJsonInto(const QByteArray &json, const QString &into, ProValueMap *value)
|
|
{
|
|
QJsonParseError error;
|
|
QJsonDocument document = QJsonDocument::fromJson(json, &error);
|
|
if (document.isNull()) {
|
|
if (error.error != QJsonParseError::NoError) {
|
|
ErrorPosition errorPos = calculateErrorPosition(json, error.offset);
|
|
evalError(fL1S("Error parsing JSON at %1:%2: %3")
|
|
.arg(errorPos.line).arg(errorPos.column).arg(error.errorString()));
|
|
}
|
|
return QMakeEvaluator::ReturnFalse;
|
|
}
|
|
|
|
QString currentKey = into + QLatin1Char('.');
|
|
|
|
// top-level item is either an array or object
|
|
if (document.isArray())
|
|
addJsonArray(document.array(), currentKey, value);
|
|
else if (document.isObject())
|
|
addJsonObject(document.object(), currentKey, value);
|
|
else
|
|
return QMakeEvaluator::ReturnFalse;
|
|
|
|
return QMakeEvaluator::ReturnTrue;
|
|
}
|
|
#endif
|
|
|
|
QMakeEvaluator::VisitReturn
|
|
QMakeEvaluator::writeFile(const QString &ctx, const QString &fn, QIODevice::OpenMode mode,
|
|
bool exe, const QString &contents)
|
|
{
|
|
QString errStr;
|
|
if (!m_vfs->writeFile(fn, mode, exe, contents, &errStr)) {
|
|
evalError(fL1S("Cannot write %1file %2: %3")
|
|
.arg(ctx, QDir::toNativeSeparators(fn), errStr));
|
|
return ReturnFalse;
|
|
}
|
|
m_parser->discardFileFromCache(fn);
|
|
return ReturnTrue;
|
|
}
|
|
|
|
#ifndef QT_BOOTSTRAPPED
|
|
void QMakeEvaluator::runProcess(QProcess *proc, const QString &command) const
|
|
{
|
|
proc->setWorkingDirectory(currentDirectory());
|
|
# ifdef PROEVALUATOR_SETENV
|
|
if (!m_option->environment.isEmpty())
|
|
proc->setProcessEnvironment(m_option->environment);
|
|
# endif
|
|
# ifdef Q_OS_WIN
|
|
proc->setNativeArguments(QLatin1String("/v:off /s /c \"") + command + QLatin1Char('"'));
|
|
proc->start(m_option->getEnv(QLatin1String("COMSPEC")), QStringList());
|
|
# else
|
|
proc->start(QLatin1String("/bin/sh"), QStringList() << QLatin1String("-c") << command);
|
|
# endif
|
|
proc->waitForFinished(-1);
|
|
}
|
|
#endif
|
|
|
|
QByteArray QMakeEvaluator::getCommandOutput(const QString &args, int *exitCode) const
|
|
{
|
|
QByteArray out;
|
|
#ifndef QT_BOOTSTRAPPED
|
|
QProcess proc;
|
|
runProcess(&proc, args);
|
|
*exitCode = (proc.exitStatus() == QProcess::NormalExit) ? proc.exitCode() : -1;
|
|
QByteArray errout = proc.readAllStandardError();
|
|
# ifdef PROEVALUATOR_FULL
|
|
// FIXME: Qt really should have the option to set forwarding per channel
|
|
fputs(errout.constData(), stderr);
|
|
# else
|
|
if (!errout.isEmpty()) {
|
|
if (errout.endsWith('\n'))
|
|
errout.chop(1);
|
|
m_handler->message(
|
|
QMakeHandler::EvalError | (m_cumulative ? QMakeHandler::CumulativeEvalMessage : 0),
|
|
QString::fromLocal8Bit(errout));
|
|
}
|
|
# endif
|
|
out = proc.readAllStandardOutput();
|
|
# ifdef Q_OS_WIN
|
|
// FIXME: Qt's line end conversion on sequential files should really be fixed
|
|
out.replace("\r\n", "\n");
|
|
# endif
|
|
#else
|
|
if (FILE *proc = QT_POPEN(QString(QLatin1String("cd ")
|
|
+ IoUtils::shellQuote(QDir::toNativeSeparators(currentDirectory()))
|
|
+ QLatin1String(" && ") + args).toLocal8Bit().constData(), QT_POPEN_READ)) {
|
|
while (!feof(proc)) {
|
|
char buff[10 * 1024];
|
|
int read_in = int(fread(buff, 1, sizeof(buff), proc));
|
|
if (!read_in)
|
|
break;
|
|
out += QByteArray(buff, read_in);
|
|
}
|
|
int ec = QT_PCLOSE(proc);
|
|
# ifdef Q_OS_WIN
|
|
*exitCode = ec >= 0 ? ec : -1;
|
|
# else
|
|
*exitCode = WIFEXITED(ec) ? WEXITSTATUS(ec) : -1;
|
|
# endif
|
|
}
|
|
# ifdef Q_OS_WIN
|
|
out.replace("\r\n", "\n");
|
|
# endif
|
|
#endif
|
|
return out;
|
|
}
|
|
|
|
void QMakeEvaluator::populateDeps(
|
|
const ProStringList &deps, const ProString &prefix, const ProStringList &suffixes,
|
|
const ProString &priosfx,
|
|
QHash<ProKey, QSet<ProKey> > &dependencies, ProValueMap &dependees,
|
|
QMultiMap<int, ProString> &rootSet) const
|
|
{
|
|
for (const ProString &item : deps)
|
|
if (!dependencies.contains(item.toKey())) {
|
|
QSet<ProKey> &dset = dependencies[item.toKey()]; // Always create entry
|
|
ProStringList depends;
|
|
for (const ProString &suffix : suffixes)
|
|
depends += values(ProKey(prefix + item + suffix));
|
|
if (depends.isEmpty()) {
|
|
rootSet.insert(first(ProKey(prefix + item + priosfx)).toInt(), item);
|
|
} else {
|
|
for (const ProString &dep : qAsConst(depends)) {
|
|
dset.insert(dep.toKey());
|
|
dependees[dep.toKey()] << item;
|
|
}
|
|
populateDeps(depends, prefix, suffixes, priosfx, dependencies, dependees, rootSet);
|
|
}
|
|
}
|
|
}
|
|
|
|
QMakeEvaluator::VisitReturn QMakeEvaluator::evaluateBuiltinExpand(
|
|
int func_t, const ProKey &func, const ProStringList &args, ProStringList &ret)
|
|
{
|
|
traceMsg("calling built-in $$%s(%s)", dbgKey(func), dbgSepStrList(args));
|
|
|
|
switch (func_t) {
|
|
case E_BASENAME:
|
|
case E_DIRNAME:
|
|
case E_SECTION: {
|
|
bool regexp = false;
|
|
QString sep;
|
|
ProString var;
|
|
int beg = 0;
|
|
int end = -1;
|
|
if (func_t == E_SECTION) {
|
|
if (args.count() != 3 && args.count() != 4) {
|
|
evalError(fL1S("section(var, sep, begin, end) requires three or four arguments."));
|
|
} else {
|
|
var = args[0];
|
|
sep = args.at(1).toQString();
|
|
beg = args.at(2).toInt();
|
|
if (args.count() == 4)
|
|
end = args.at(3).toInt();
|
|
}
|
|
} else {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("%1(var) requires one argument.").arg(func.toQString(m_tmp1)));
|
|
} else {
|
|
var = args[0];
|
|
regexp = true;
|
|
sep = QLatin1String("[\\\\/]");
|
|
if (func_t == E_DIRNAME)
|
|
end = -2;
|
|
else
|
|
beg = -1;
|
|
}
|
|
}
|
|
if (!var.isEmpty()) {
|
|
const auto strings = values(map(var));
|
|
if (regexp) {
|
|
QRegExp sepRx(sep);
|
|
for (const ProString &str : strings) {
|
|
const QString &rstr = str.toQString(m_tmp1).section(sepRx, beg, end);
|
|
ret << (rstr.isSharedWith(m_tmp1) ? str : ProString(rstr).setSource(str));
|
|
}
|
|
} else {
|
|
for (const ProString &str : strings) {
|
|
const QString &rstr = str.toQString(m_tmp1).section(sep, beg, end);
|
|
ret << (rstr.isSharedWith(m_tmp1) ? str : ProString(rstr).setSource(str));
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case E_SPRINTF:
|
|
if (args.count() < 1) {
|
|
evalError(fL1S("sprintf(format, ...) requires at least one argument."));
|
|
} else {
|
|
QString tmp = args.at(0).toQString(m_tmp1);
|
|
for (int i = 1; i < args.count(); ++i)
|
|
tmp = tmp.arg(args.at(i).toQString(m_tmp2));
|
|
ret << (tmp.isSharedWith(m_tmp1) ? args.at(0) : ProString(tmp).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_FORMAT_NUMBER:
|
|
if (args.count() > 2) {
|
|
evalError(fL1S("format_number(number[, options...]) requires one or two arguments."));
|
|
} else {
|
|
int ibase = 10;
|
|
int obase = 10;
|
|
int width = 0;
|
|
bool zeropad = false;
|
|
bool leftalign = false;
|
|
enum { DefaultSign, PadSign, AlwaysSign } sign = DefaultSign;
|
|
if (args.count() >= 2) {
|
|
const auto opts = split_value_list(args.at(1).toQStringRef());
|
|
for (const ProString &opt : opts) {
|
|
if (opt.startsWith(QLatin1String("ibase="))) {
|
|
ibase = opt.mid(6).toInt();
|
|
} else if (opt.startsWith(QLatin1String("obase="))) {
|
|
obase = opt.mid(6).toInt();
|
|
} else if (opt.startsWith(QLatin1String("width="))) {
|
|
width = opt.mid(6).toInt();
|
|
} else if (opt == QLatin1String("zeropad")) {
|
|
zeropad = true;
|
|
} else if (opt == QLatin1String("padsign")) {
|
|
sign = PadSign;
|
|
} else if (opt == QLatin1String("alwayssign")) {
|
|
sign = AlwaysSign;
|
|
} else if (opt == QLatin1String("leftalign")) {
|
|
leftalign = true;
|
|
} else {
|
|
evalError(fL1S("format_number(): invalid format option %1.")
|
|
.arg(opt.toQString(m_tmp3)));
|
|
goto formfail;
|
|
}
|
|
}
|
|
}
|
|
if (args.at(0).contains(QLatin1Char('.'))) {
|
|
evalError(fL1S("format_number(): floats are currently not supported."));
|
|
break;
|
|
}
|
|
bool ok;
|
|
qlonglong num = args.at(0).toLongLong(&ok, ibase);
|
|
if (!ok) {
|
|
evalError(fL1S("format_number(): malformed number %2 for base %1.")
|
|
.arg(ibase).arg(args.at(0).toQString(m_tmp3)));
|
|
break;
|
|
}
|
|
QString outstr;
|
|
if (num < 0) {
|
|
num = -num;
|
|
outstr = QLatin1Char('-');
|
|
} else if (sign == AlwaysSign) {
|
|
outstr = QLatin1Char('+');
|
|
} else if (sign == PadSign) {
|
|
outstr = QLatin1Char(' ');
|
|
}
|
|
QString numstr = QString::number(num, obase);
|
|
int space = width - outstr.length() - numstr.length();
|
|
if (space <= 0) {
|
|
outstr += numstr;
|
|
} else if (leftalign) {
|
|
outstr += numstr + QString(space, QLatin1Char(' '));
|
|
} else if (zeropad) {
|
|
outstr += QString(space, QLatin1Char('0')) + numstr;
|
|
} else {
|
|
outstr.prepend(QString(space, QLatin1Char(' ')));
|
|
outstr += numstr;
|
|
}
|
|
ret += ProString(outstr);
|
|
}
|
|
formfail:
|
|
break;
|
|
case E_NUM_ADD:
|
|
if (args.count() < 1 || args.at(0).isEmpty()) {
|
|
evalError(fL1S("num_add(num, ...) requires at least one argument."));
|
|
} else {
|
|
qlonglong sum = 0;
|
|
for (const ProString &arg : qAsConst(args)) {
|
|
if (arg.contains(QLatin1Char('.'))) {
|
|
evalError(fL1S("num_add(): floats are currently not supported."));
|
|
goto nafail;
|
|
}
|
|
bool ok;
|
|
qlonglong num = arg.toLongLong(&ok);
|
|
if (!ok) {
|
|
evalError(fL1S("num_add(): malformed number %1.")
|
|
.arg(arg.toQString(m_tmp3)));
|
|
goto nafail;
|
|
}
|
|
sum += num;
|
|
}
|
|
ret += ProString(QString::number(sum));
|
|
}
|
|
nafail:
|
|
break;
|
|
case E_JOIN: {
|
|
if (args.count() < 1 || args.count() > 4) {
|
|
evalError(fL1S("join(var, glue, before, after) requires one to four arguments."));
|
|
} else {
|
|
ProString glue, before, after;
|
|
if (args.count() >= 2)
|
|
glue = args.at(1);
|
|
if (args.count() >= 3)
|
|
before = args[2];
|
|
if (args.count() == 4)
|
|
after = args[3];
|
|
const ProStringList &var = values(map(args.at(0)));
|
|
if (!var.isEmpty()) {
|
|
const ProFile *src = currentProFile();
|
|
for (const ProString &v : var)
|
|
if (const ProFile *s = v.sourceFile()) {
|
|
src = s;
|
|
break;
|
|
}
|
|
ret << ProString(before + var.join(glue) + after).setSource(src);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case E_SPLIT:
|
|
if (args.count() < 1 || args.count() > 2) {
|
|
evalError(fL1S("split(var, sep) requires one or two arguments."));
|
|
} else {
|
|
const QString &sep = (args.count() == 2) ? args.at(1).toQString(m_tmp1) : statics.field_sep;
|
|
const auto vars = values(map(args.at(0)));
|
|
for (const ProString &var : vars) {
|
|
const auto splits = var.toQString(m_tmp2).split(sep);
|
|
for (const QString &splt : splits)
|
|
ret << (splt.isSharedWith(m_tmp2) ? var : ProString(splt).setSource(var));
|
|
}
|
|
}
|
|
break;
|
|
case E_MEMBER:
|
|
if (args.count() < 1 || args.count() > 3) {
|
|
evalError(fL1S("member(var, start, end) requires one to three arguments."));
|
|
} else {
|
|
const ProStringList &src = values(map(args.at(0)));
|
|
int start, end;
|
|
if (getMemberArgs(func, src.size(), args, &start, &end)) {
|
|
ret.reserve(qAbs(end - start) + 1);
|
|
if (start < end) {
|
|
for (int i = start; i <= end && src.size() >= i; i++)
|
|
ret += src.at(i);
|
|
} else {
|
|
for (int i = start; i >= end && src.size() >= i && i >= 0; i--)
|
|
ret += src.at(i);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case E_STR_MEMBER:
|
|
if (args.count() < 1 || args.count() > 3) {
|
|
evalError(fL1S("str_member(str, start, end) requires one to three arguments."));
|
|
} else {
|
|
const ProString &src = args.at(0);
|
|
int start, end;
|
|
if (getMemberArgs(func, src.size(), args, &start, &end)) {
|
|
QString res;
|
|
res.reserve(qAbs(end - start) + 1);
|
|
if (start < end) {
|
|
for (int i = start; i <= end && src.size() >= i; i++)
|
|
res += src.at(i);
|
|
} else {
|
|
for (int i = start; i >= end && src.size() >= i && i >= 0; i--)
|
|
res += src.at(i);
|
|
}
|
|
ret += ProString(res);
|
|
}
|
|
}
|
|
break;
|
|
case E_FIRST:
|
|
case E_LAST:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("%1(var) requires one argument.").arg(func.toQString(m_tmp1)));
|
|
} else {
|
|
const ProStringList &var = values(map(args.at(0)));
|
|
if (!var.isEmpty()) {
|
|
if (func_t == E_FIRST)
|
|
ret.append(var[0]);
|
|
else
|
|
ret.append(var.last());
|
|
}
|
|
}
|
|
break;
|
|
case E_TAKE_FIRST:
|
|
case E_TAKE_LAST:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("%1(var) requires one argument.").arg(func.toQString(m_tmp1)));
|
|
} else {
|
|
ProStringList &var = valuesRef(map(args.at(0)));
|
|
if (!var.isEmpty()) {
|
|
if (func_t == E_TAKE_FIRST)
|
|
ret.append(var.takeFirst());
|
|
else
|
|
ret.append(var.takeLast());
|
|
}
|
|
}
|
|
break;
|
|
case E_SIZE:
|
|
if (args.count() != 1)
|
|
evalError(fL1S("size(var) requires one argument."));
|
|
else
|
|
ret.append(ProString(QString::number(values(map(args.at(0))).size())));
|
|
break;
|
|
case E_STR_SIZE:
|
|
if (args.count() != 1)
|
|
evalError(fL1S("str_size(str) requires one argument."));
|
|
else
|
|
ret.append(ProString(QString::number(args.at(0).size())));
|
|
break;
|
|
case E_CAT:
|
|
if (args.count() < 1 || args.count() > 2) {
|
|
evalError(fL1S("cat(file, singleline=true) requires one or two arguments."));
|
|
} else {
|
|
const QString &file = args.at(0).toQString(m_tmp1);
|
|
|
|
bool blob = false;
|
|
bool lines = false;
|
|
bool singleLine = true;
|
|
if (args.count() > 1) {
|
|
if (!args.at(1).compare(QLatin1String("false"), Qt::CaseInsensitive))
|
|
singleLine = false;
|
|
else if (!args.at(1).compare(QLatin1String("blob"), Qt::CaseInsensitive))
|
|
blob = true;
|
|
else if (!args.at(1).compare(QLatin1String("lines"), Qt::CaseInsensitive))
|
|
lines = true;
|
|
}
|
|
|
|
QFile qfile(resolvePath(m_option->expandEnvVars(file)));
|
|
if (qfile.open(QIODevice::ReadOnly)) {
|
|
QTextStream stream(&qfile);
|
|
if (blob) {
|
|
ret += ProString(stream.readAll());
|
|
} else {
|
|
while (!stream.atEnd()) {
|
|
if (lines) {
|
|
ret += ProString(stream.readLine());
|
|
} else {
|
|
const QString &line = stream.readLine();
|
|
ret += split_value_list(QStringRef(&line).trimmed());
|
|
if (!singleLine)
|
|
ret += ProString("\n");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case E_FROMFILE:
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("fromfile(file, variable) requires two arguments."));
|
|
} else {
|
|
ProValueMap vars;
|
|
QString fn = resolvePath(m_option->expandEnvVars(args.at(0).toQString(m_tmp1)));
|
|
fn.detach();
|
|
if (evaluateFileInto(fn, &vars, LoadProOnly) == ReturnTrue)
|
|
ret = vars.value(map(args.at(1)));
|
|
}
|
|
break;
|
|
case E_EVAL:
|
|
if (args.count() != 1)
|
|
evalError(fL1S("eval(variable) requires one argument."));
|
|
else
|
|
ret += values(map(args.at(0)));
|
|
break;
|
|
case E_LIST: {
|
|
QString tmp;
|
|
tmp.sprintf(".QMAKE_INTERNAL_TMP_variableName_%d", m_listCount++);
|
|
ret = ProStringList(ProString(tmp));
|
|
ProStringList lst;
|
|
for (const ProString &arg : args)
|
|
lst += split_value_list(arg.toQStringRef(), arg.sourceFile()); // Relies on deep copy
|
|
m_valuemapStack.top()[ret.at(0).toKey()] = lst;
|
|
break; }
|
|
case E_FIND:
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("find(var, str) requires two arguments."));
|
|
} else {
|
|
QRegExp regx(args.at(1).toQString());
|
|
int t = 0;
|
|
const auto vals = values(map(args.at(0)));
|
|
for (const ProString &val : vals) {
|
|
if (regx.indexIn(val.toQString(m_tmp[t])) != -1)
|
|
ret += val;
|
|
t ^= 1;
|
|
}
|
|
}
|
|
break;
|
|
case E_SYSTEM:
|
|
if (!m_skipLevel) {
|
|
if (args.count() < 1 || args.count() > 3) {
|
|
evalError(fL1S("system(command, [mode], [stsvar]) requires one to three arguments."));
|
|
} else {
|
|
bool blob = false;
|
|
bool lines = false;
|
|
bool singleLine = true;
|
|
if (args.count() > 1) {
|
|
if (!args.at(1).compare(QLatin1String("false"), Qt::CaseInsensitive))
|
|
singleLine = false;
|
|
else if (!args.at(1).compare(QLatin1String("blob"), Qt::CaseInsensitive))
|
|
blob = true;
|
|
else if (!args.at(1).compare(QLatin1String("lines"), Qt::CaseInsensitive))
|
|
lines = true;
|
|
}
|
|
int exitCode;
|
|
QByteArray bytes = getCommandOutput(args.at(0).toQString(m_tmp2), &exitCode);
|
|
if (args.count() > 2 && !args.at(2).isEmpty()) {
|
|
m_valuemapStack.top()[args.at(2).toKey()] =
|
|
ProStringList(ProString(QString::number(exitCode)));
|
|
}
|
|
if (lines) {
|
|
QTextStream stream(bytes);
|
|
while (!stream.atEnd())
|
|
ret += ProString(stream.readLine());
|
|
} else {
|
|
QString output = QString::fromLocal8Bit(bytes);
|
|
if (blob) {
|
|
ret += ProString(output);
|
|
} else {
|
|
output.replace(QLatin1Char('\t'), QLatin1Char(' '));
|
|
if (singleLine)
|
|
output.replace(QLatin1Char('\n'), QLatin1Char(' '));
|
|
ret += split_value_list(QStringRef(&output));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case E_UNIQUE:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("unique(var) requires one argument."));
|
|
} else {
|
|
ret = values(map(args.at(0)));
|
|
ret.removeDuplicates();
|
|
}
|
|
break;
|
|
case E_SORTED:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("sorted(var) requires one argument."));
|
|
} else {
|
|
ret = values(map(args.at(0)));
|
|
std::sort(ret.begin(), ret.end());
|
|
}
|
|
break;
|
|
case E_REVERSE:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("reverse(var) requires one argument."));
|
|
} else {
|
|
ProStringList var = values(args.at(0).toKey());
|
|
for (int i = 0; i < var.size() / 2; i++)
|
|
qSwap(var[i], var[var.size() - i - 1]);
|
|
ret += var;
|
|
}
|
|
break;
|
|
case E_QUOTE:
|
|
ret += args;
|
|
break;
|
|
case E_ESCAPE_EXPAND:
|
|
for (int i = 0; i < args.size(); ++i) {
|
|
QString str = args.at(i).toQString();
|
|
QChar *i_data = str.data();
|
|
int i_len = str.length();
|
|
for (int x = 0; x < i_len; ++x) {
|
|
if (*(i_data+x) == QLatin1Char('\\') && x < i_len-1) {
|
|
if (*(i_data+x+1) == QLatin1Char('\\')) {
|
|
++x;
|
|
} else {
|
|
struct {
|
|
char in, out;
|
|
} mapped_quotes[] = {
|
|
{ 'n', '\n' },
|
|
{ 't', '\t' },
|
|
{ 'r', '\r' },
|
|
{ 0, 0 }
|
|
};
|
|
for (int i = 0; mapped_quotes[i].in; ++i) {
|
|
if (*(i_data+x+1) == QLatin1Char(mapped_quotes[i].in)) {
|
|
*(i_data+x) = QLatin1Char(mapped_quotes[i].out);
|
|
if (x < i_len-2)
|
|
memmove(i_data+x+1, i_data+x+2, (i_len-x-2)*sizeof(QChar));
|
|
--i_len;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
ret.append(ProString(QString(i_data, i_len)).setSource(args.at(i)));
|
|
}
|
|
break;
|
|
case E_RE_ESCAPE:
|
|
for (int i = 0; i < args.size(); ++i) {
|
|
const QString &rstr = QRegExp::escape(args.at(i).toQString(m_tmp1));
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(i) : ProString(rstr).setSource(args.at(i)));
|
|
}
|
|
break;
|
|
case E_VAL_ESCAPE:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("val_escape(var) requires one argument."));
|
|
} else {
|
|
const ProStringList &vals = values(args.at(0).toKey());
|
|
ret.reserve(vals.size());
|
|
for (const ProString &str : vals)
|
|
ret += ProString(quoteValue(str));
|
|
}
|
|
break;
|
|
case E_UPPER:
|
|
case E_LOWER:
|
|
case E_TITLE:
|
|
for (int i = 0; i < args.count(); ++i) {
|
|
QString rstr = args.at(i).toQString(m_tmp1);
|
|
if (func_t == E_UPPER) {
|
|
rstr = rstr.toUpper();
|
|
} else {
|
|
rstr = rstr.toLower();
|
|
if (func_t == E_TITLE && rstr.length() > 0)
|
|
rstr[0] = rstr.at(0).toTitleCase();
|
|
}
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(i) : ProString(rstr).setSource(args.at(i)));
|
|
}
|
|
break;
|
|
case E_FILES:
|
|
if (args.count() != 1 && args.count() != 2) {
|
|
evalError(fL1S("files(pattern, recursive=false) requires one or two arguments."));
|
|
} else {
|
|
bool recursive = false;
|
|
if (args.count() == 2)
|
|
recursive = isTrue(args.at(1));
|
|
QStringList dirs;
|
|
QString r = m_option->expandEnvVars(args.at(0).toQString(m_tmp1))
|
|
.replace(QLatin1Char('\\'), QLatin1Char('/'));
|
|
QString pfx;
|
|
if (IoUtils::isRelativePath(r)) {
|
|
pfx = currentDirectory();
|
|
if (!pfx.endsWith(QLatin1Char('/')))
|
|
pfx += QLatin1Char('/');
|
|
}
|
|
int slash = r.lastIndexOf(QLatin1Char('/'));
|
|
if (slash != -1) {
|
|
dirs.append(r.left(slash+1));
|
|
r = r.mid(slash+1);
|
|
} else {
|
|
dirs.append(QString());
|
|
}
|
|
|
|
r.detach(); // Keep m_tmp out of QRegExp's cache
|
|
QRegExp regex(r, Qt::CaseSensitive, QRegExp::Wildcard);
|
|
for (int d = 0; d < dirs.count(); d++) {
|
|
QString dir = dirs[d];
|
|
QDir qdir(pfx + dir);
|
|
for (int i = 0; i < (int)qdir.count(); ++i) {
|
|
if (qdir[i] == statics.strDot || qdir[i] == statics.strDotDot)
|
|
continue;
|
|
QString fname = dir + qdir[i];
|
|
if (IoUtils::fileType(pfx + fname) == IoUtils::FileIsDir) {
|
|
if (recursive)
|
|
dirs.append(fname + QLatin1Char('/'));
|
|
}
|
|
if (regex.exactMatch(qdir[i]))
|
|
ret += ProString(fname).setSource(currentProFile());
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
#ifdef PROEVALUATOR_FULL
|
|
case E_PROMPT: {
|
|
if (args.count() != 1 && args.count() != 2) {
|
|
evalError(fL1S("prompt(question, [decorate=true]) requires one or two arguments."));
|
|
// } else if (currentFileName() == QLatin1String("-")) {
|
|
// evalError(fL1S("prompt(question) cannot be used when '-o -' is used"));
|
|
} else {
|
|
QString msg = m_option->expandEnvVars(args.at(0).toQString(m_tmp1));
|
|
bool decorate = true;
|
|
if (args.count() == 2)
|
|
decorate = isTrue(args.at(1));
|
|
if (decorate) {
|
|
if (!msg.endsWith(QLatin1Char('?')))
|
|
msg += QLatin1Char('?');
|
|
fprintf(stderr, "Project PROMPT: %s ", qPrintable(msg));
|
|
} else {
|
|
fputs(qPrintable(msg), stderr);
|
|
}
|
|
QFile qfile;
|
|
if (qfile.open(stdin, QIODevice::ReadOnly)) {
|
|
QTextStream t(&qfile);
|
|
const QString &line = t.readLine();
|
|
if (t.atEnd()) {
|
|
fputs("\n", stderr);
|
|
evalError(fL1S("Unexpected EOF."));
|
|
return ReturnError;
|
|
}
|
|
ret = split_value_list(QStringRef(&line));
|
|
}
|
|
}
|
|
break; }
|
|
#endif
|
|
case E_REPLACE:
|
|
if (args.count() != 3 ) {
|
|
evalError(fL1S("replace(var, before, after) requires three arguments."));
|
|
} else {
|
|
const QRegExp before(args.at(1).toQString());
|
|
const QString &after(args.at(2).toQString(m_tmp2));
|
|
const auto vals = values(map(args.at(0)));
|
|
for (const ProString &val : vals) {
|
|
QString rstr = val.toQString(m_tmp1);
|
|
QString copy = rstr; // Force a detach on modify
|
|
rstr.replace(before, after);
|
|
ret << (rstr.isSharedWith(m_tmp1) ? val : ProString(rstr).setSource(val));
|
|
}
|
|
}
|
|
break;
|
|
case E_SORT_DEPENDS:
|
|
case E_RESOLVE_DEPENDS:
|
|
if (args.count() < 1 || args.count() > 4) {
|
|
evalError(fL1S("%1(var, [prefix, [suffixes, [prio-suffix]]]) requires one to four arguments.")
|
|
.arg(func.toQString(m_tmp1)));
|
|
} else {
|
|
QHash<ProKey, QSet<ProKey> > dependencies;
|
|
ProValueMap dependees;
|
|
QMultiMap<int, ProString> rootSet;
|
|
ProStringList orgList = values(args.at(0).toKey());
|
|
ProString prefix = args.count() < 2 ? ProString() : args.at(1);
|
|
ProString priosfx = args.count() < 4 ? ProString(".priority") : args.at(3);
|
|
populateDeps(orgList, prefix,
|
|
args.count() < 3 ? ProStringList(ProString(".depends"))
|
|
: split_value_list(args.at(2).toQStringRef()),
|
|
priosfx, dependencies, dependees, rootSet);
|
|
while (!rootSet.isEmpty()) {
|
|
QMultiMap<int, ProString>::iterator it = rootSet.begin();
|
|
const ProString item = *it;
|
|
rootSet.erase(it);
|
|
if ((func_t == E_RESOLVE_DEPENDS) || orgList.contains(item))
|
|
ret.prepend(item);
|
|
for (const ProString &dep : qAsConst(dependees[item.toKey()])) {
|
|
QSet<ProKey> &dset = dependencies[dep.toKey()];
|
|
dset.remove(item.toKey());
|
|
if (dset.isEmpty())
|
|
rootSet.insert(first(ProKey(prefix + dep + priosfx)).toInt(), dep);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case E_ENUMERATE_VARS: {
|
|
QSet<ProString> keys;
|
|
for (const ProValueMap &vmap : qAsConst(m_valuemapStack))
|
|
for (ProValueMap::ConstIterator it = vmap.constBegin(); it != vmap.constEnd(); ++it)
|
|
keys.insert(it.key());
|
|
ret.reserve(keys.size());
|
|
for (const ProString &key : qAsConst(keys))
|
|
ret << key;
|
|
break; }
|
|
case E_SHADOWED:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("shadowed(path) requires one argument."));
|
|
} else {
|
|
QString rstr = m_option->shadowedPath(resolvePath(args.at(0).toQString(m_tmp1)));
|
|
if (rstr.isEmpty())
|
|
break;
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_ABSOLUTE_PATH:
|
|
if (args.count() > 2) {
|
|
evalError(fL1S("absolute_path(path[, base]) requires one or two arguments."));
|
|
} else {
|
|
QString rstr = QDir::cleanPath(
|
|
QDir(args.count() > 1 ? args.at(1).toQString(m_tmp2) : currentDirectory())
|
|
.absoluteFilePath(args.at(0).toQString(m_tmp1)));
|
|
ret << (rstr.isSharedWith(m_tmp1)
|
|
? args.at(0)
|
|
: args.count() > 1 && rstr.isSharedWith(m_tmp2)
|
|
? args.at(1)
|
|
: ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_RELATIVE_PATH:
|
|
if (args.count() > 2) {
|
|
evalError(fL1S("relative_path(path[, base]) requires one or two arguments."));
|
|
} else {
|
|
QDir baseDir(args.count() > 1 ? args.at(1).toQString(m_tmp2) : currentDirectory());
|
|
QString rstr = baseDir.relativeFilePath(baseDir.absoluteFilePath(
|
|
args.at(0).toQString(m_tmp1)));
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_CLEAN_PATH:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("clean_path(path) requires one argument."));
|
|
} else {
|
|
QString rstr = QDir::cleanPath(args.at(0).toQString(m_tmp1));
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_SYSTEM_PATH:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("system_path(path) requires one argument."));
|
|
} else {
|
|
QString rstr = args.at(0).toQString(m_tmp1);
|
|
#ifdef Q_OS_WIN
|
|
rstr.replace(QLatin1Char('/'), QLatin1Char('\\'));
|
|
#else
|
|
rstr.replace(QLatin1Char('\\'), QLatin1Char('/'));
|
|
#endif
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_SHELL_PATH:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("shell_path(path) requires one argument."));
|
|
} else {
|
|
QString rstr = args.at(0).toQString(m_tmp1);
|
|
if (m_dirSep.startsWith(QLatin1Char('\\'))) {
|
|
rstr.replace(QLatin1Char('/'), QLatin1Char('\\'));
|
|
} else {
|
|
rstr.replace(QLatin1Char('\\'), QLatin1Char('/'));
|
|
#ifdef Q_OS_WIN
|
|
// Convert d:/foo/bar to msys-style /d/foo/bar.
|
|
if (rstr.length() > 2 && rstr.at(1) == QLatin1Char(':') && rstr.at(2) == QLatin1Char('/')) {
|
|
rstr[1] = rstr.at(0);
|
|
rstr[0] = QLatin1Char('/');
|
|
}
|
|
#endif
|
|
}
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_SYSTEM_QUOTE:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("system_quote(arg) requires one argument."));
|
|
} else {
|
|
QString rstr = IoUtils::shellQuote(args.at(0).toQString(m_tmp1));
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_SHELL_QUOTE:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("shell_quote(arg) requires one argument."));
|
|
} else {
|
|
QString rstr = args.at(0).toQString(m_tmp1);
|
|
if (m_dirSep.startsWith(QLatin1Char('\\')))
|
|
rstr = IoUtils::shellQuoteWin(rstr);
|
|
else
|
|
rstr = IoUtils::shellQuoteUnix(rstr);
|
|
ret << (rstr.isSharedWith(m_tmp1) ? args.at(0) : ProString(rstr).setSource(args.at(0)));
|
|
}
|
|
break;
|
|
case E_GETENV:
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("getenv(arg) requires one argument."));
|
|
} else {
|
|
const ProString &var = args.at(0);
|
|
const ProString &val = ProString(m_option->getEnv(var.toQString(m_tmp1)));
|
|
ret << val;
|
|
}
|
|
break;
|
|
default:
|
|
evalError(fL1S("Function '%1' is not implemented.").arg(func.toQString(m_tmp1)));
|
|
break;
|
|
}
|
|
|
|
return ReturnTrue;
|
|
}
|
|
|
|
QMakeEvaluator::VisitReturn QMakeEvaluator::evaluateBuiltinConditional(
|
|
int func_t, const ProKey &function, const ProStringList &args)
|
|
{
|
|
traceMsg("calling built-in %s(%s)", dbgKey(function), dbgSepStrList(args));
|
|
|
|
switch (func_t) {
|
|
case T_DEFINED: {
|
|
if (args.count() < 1 || args.count() > 2) {
|
|
evalError(fL1S("defined(function, [\"test\"|\"replace\"|\"var\"])"
|
|
" requires one or two arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
const ProKey &var = args.at(0).toKey();
|
|
if (args.count() > 1) {
|
|
if (args[1] == QLatin1String("test")) {
|
|
return returnBool(m_functionDefs.testFunctions.contains(var));
|
|
} else if (args[1] == QLatin1String("replace")) {
|
|
return returnBool(m_functionDefs.replaceFunctions.contains(var));
|
|
} else if (args[1] == QLatin1String("var")) {
|
|
ProValueMap::Iterator it;
|
|
return returnBool(findValues(var, &it));
|
|
}
|
|
evalError(fL1S("defined(function, type): unexpected type [%1].")
|
|
.arg(args.at(1).toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
return returnBool(m_functionDefs.replaceFunctions.contains(var)
|
|
|| m_functionDefs.testFunctions.contains(var));
|
|
}
|
|
case T_EXPORT: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("export(variable) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
const ProKey &var = map(args.at(0));
|
|
for (ProValueMapStack::Iterator vmi = m_valuemapStack.end();
|
|
--vmi != m_valuemapStack.begin(); ) {
|
|
ProValueMap::Iterator it = (*vmi).find(var);
|
|
if (it != (*vmi).end()) {
|
|
if (it->constBegin() == statics.fakeValue.constBegin()) {
|
|
// This is stupid, but qmake doesn't propagate deletions
|
|
m_valuemapStack.first()[var] = ProStringList();
|
|
} else {
|
|
m_valuemapStack.first()[var] = *it;
|
|
}
|
|
(*vmi).erase(it);
|
|
while (--vmi != m_valuemapStack.begin())
|
|
(*vmi).remove(var);
|
|
break;
|
|
}
|
|
}
|
|
return ReturnTrue;
|
|
}
|
|
case T_DISCARD_FROM: {
|
|
if (args.count() != 1 || args.at(0).isEmpty()) {
|
|
evalError(fL1S("discard_from(file) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
if (m_valuemapStack.count() != 1) {
|
|
evalError(fL1S("discard_from() cannot be called from functions."));
|
|
return ReturnFalse;
|
|
}
|
|
QString fn = resolvePath(args.at(0).toQString(m_tmp1));
|
|
ProFile *pro = m_parser->parsedProFile(fn, QMakeParser::ParseOnlyCached);
|
|
if (!pro)
|
|
return ReturnFalse;
|
|
ProValueMap &vmap = m_valuemapStack.first();
|
|
for (auto vit = vmap.begin(); vit != vmap.end(); ) {
|
|
if (!vit->isEmpty()) {
|
|
auto isFrom = [pro](const ProString &s) {
|
|
return s.sourceFile() == pro;
|
|
};
|
|
vit->erase(std::remove_if(vit->begin(), vit->end(), isFrom), vit->end());
|
|
if (vit->isEmpty()) {
|
|
// When an initially non-empty variable becomes entirely empty,
|
|
// undefine it altogether.
|
|
vit = vmap.erase(vit);
|
|
continue;
|
|
}
|
|
}
|
|
++vit;
|
|
}
|
|
for (auto fit = m_functionDefs.testFunctions.begin(); fit != m_functionDefs.testFunctions.end(); ) {
|
|
if (fit->pro() == pro)
|
|
fit = m_functionDefs.testFunctions.erase(fit);
|
|
else
|
|
++fit;
|
|
}
|
|
for (auto fit = m_functionDefs.replaceFunctions.begin(); fit != m_functionDefs.replaceFunctions.end(); ) {
|
|
if (fit->pro() == pro)
|
|
fit = m_functionDefs.replaceFunctions.erase(fit);
|
|
else
|
|
++fit;
|
|
}
|
|
pro->deref();
|
|
ProStringList &iif = m_valuemapStack.first()[ProKey("QMAKE_INTERNAL_INCLUDED_FILES")];
|
|
int idx = iif.indexOf(ProString(fn));
|
|
if (idx >= 0)
|
|
iif.removeAt(idx);
|
|
return ReturnTrue;
|
|
}
|
|
case T_INFILE:
|
|
if (args.count() < 2 || args.count() > 3) {
|
|
evalError(fL1S("infile(file, var, [values]) requires two or three arguments."));
|
|
} else {
|
|
ProValueMap vars;
|
|
QString fn = resolvePath(m_option->expandEnvVars(args.at(0).toQString(m_tmp1)));
|
|
fn.detach();
|
|
VisitReturn ok = evaluateFileInto(fn, &vars, LoadProOnly);
|
|
if (ok != ReturnTrue)
|
|
return ok;
|
|
if (args.count() == 2)
|
|
return returnBool(vars.contains(map(args.at(1))));
|
|
QRegExp regx;
|
|
const QString &qry = args.at(2).toQString(m_tmp1);
|
|
if (qry != QRegExp::escape(qry)) {
|
|
QString copy = qry;
|
|
copy.detach();
|
|
regx.setPattern(copy);
|
|
}
|
|
int t = 0;
|
|
const auto strings = vars.value(map(args.at(1)));
|
|
for (const ProString &s : strings) {
|
|
if ((!regx.isEmpty() && regx.exactMatch(s.toQString(m_tmp[t]))) || s == qry)
|
|
return ReturnTrue;
|
|
t ^= 1;
|
|
}
|
|
}
|
|
return ReturnFalse;
|
|
case T_REQUIRES:
|
|
#ifdef PROEVALUATOR_FULL
|
|
if (checkRequirements(args) == ReturnError)
|
|
return ReturnError;
|
|
#endif
|
|
return ReturnFalse; // Another qmake breakage
|
|
case T_EVAL: {
|
|
VisitReturn ret = ReturnFalse;
|
|
QString contents = args.join(statics.field_sep);
|
|
ProFile *pro = m_parser->parsedProBlock(QStringRef(&contents),
|
|
m_current.pro->fileName(), m_current.line);
|
|
if (m_cumulative || pro->isOk()) {
|
|
m_locationStack.push(m_current);
|
|
visitProBlock(pro, pro->tokPtr());
|
|
ret = ReturnTrue; // This return value is not too useful, but that's qmake
|
|
m_current = m_locationStack.pop();
|
|
}
|
|
pro->deref();
|
|
return ret;
|
|
}
|
|
case T_IF: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("if(condition) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
return evaluateConditional(args.at(0).toQStringRef(),
|
|
m_current.pro->fileName(), m_current.line);
|
|
}
|
|
case T_CONFIG: {
|
|
if (args.count() < 1 || args.count() > 2) {
|
|
evalError(fL1S("CONFIG(config) requires one or two arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
if (args.count() == 1)
|
|
return returnBool(isActiveConfig(args.at(0).toQStringRef()));
|
|
const QStringList &mutuals = args.at(1).toQString(m_tmp2).split(QLatin1Char('|'));
|
|
const ProStringList &configs = values(statics.strCONFIG);
|
|
|
|
for (int i = configs.size() - 1; i >= 0; i--) {
|
|
for (int mut = 0; mut < mutuals.count(); mut++) {
|
|
if (configs[i] == mutuals[mut].trimmed())
|
|
return returnBool(configs[i] == args[0]);
|
|
}
|
|
}
|
|
return ReturnFalse;
|
|
}
|
|
case T_CONTAINS: {
|
|
if (args.count() < 2 || args.count() > 3) {
|
|
evalError(fL1S("contains(var, val) requires two or three arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
|
|
const QString &qry = args.at(1).toQString(m_tmp1);
|
|
QRegExp regx;
|
|
if (qry != QRegExp::escape(qry)) {
|
|
QString copy = qry;
|
|
copy.detach();
|
|
regx.setPattern(copy);
|
|
}
|
|
const ProStringList &l = values(map(args.at(0)));
|
|
if (args.count() == 2) {
|
|
int t = 0;
|
|
for (int i = 0; i < l.size(); ++i) {
|
|
const ProString &val = l[i];
|
|
if ((!regx.isEmpty() && regx.exactMatch(val.toQString(m_tmp[t]))) || val == qry)
|
|
return ReturnTrue;
|
|
t ^= 1;
|
|
}
|
|
} else {
|
|
const QStringList &mutuals = args.at(2).toQString(m_tmp3).split(QLatin1Char('|'));
|
|
for (int i = l.size() - 1; i >= 0; i--) {
|
|
const ProString val = l[i];
|
|
for (int mut = 0; mut < mutuals.count(); mut++) {
|
|
if (val == mutuals[mut].trimmed()) {
|
|
return returnBool((!regx.isEmpty()
|
|
&& regx.exactMatch(val.toQString(m_tmp2)))
|
|
|| val == qry);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return ReturnFalse;
|
|
}
|
|
case T_COUNT: {
|
|
if (args.count() != 2 && args.count() != 3) {
|
|
evalError(fL1S("count(var, count, op=\"equals\") requires two or three arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
int cnt = values(map(args.at(0))).count();
|
|
int val = args.at(1).toInt();
|
|
if (args.count() == 3) {
|
|
const ProString &comp = args.at(2);
|
|
if (comp == QLatin1String(">") || comp == QLatin1String("greaterThan")) {
|
|
return returnBool(cnt > val);
|
|
} else if (comp == QLatin1String(">=")) {
|
|
return returnBool(cnt >= val);
|
|
} else if (comp == QLatin1String("<") || comp == QLatin1String("lessThan")) {
|
|
return returnBool(cnt < val);
|
|
} else if (comp == QLatin1String("<=")) {
|
|
return returnBool(cnt <= val);
|
|
} else if (comp == QLatin1String("equals") || comp == QLatin1String("isEqual")
|
|
|| comp == QLatin1String("=") || comp == QLatin1String("==")) {
|
|
// fallthrough
|
|
} else {
|
|
evalError(fL1S("Unexpected modifier to count(%2).").arg(comp.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
}
|
|
return returnBool(cnt == val);
|
|
}
|
|
case T_GREATERTHAN:
|
|
case T_LESSTHAN: {
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("%1(variable, value) requires two arguments.")
|
|
.arg(function.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
const ProString &rhs = args.at(1);
|
|
const QString &lhs = values(map(args.at(0))).join(statics.field_sep);
|
|
bool ok;
|
|
int rhs_int = rhs.toInt(&ok);
|
|
if (ok) { // do integer compare
|
|
int lhs_int = lhs.toInt(&ok);
|
|
if (ok) {
|
|
if (func_t == T_GREATERTHAN)
|
|
return returnBool(lhs_int > rhs_int);
|
|
return returnBool(lhs_int < rhs_int);
|
|
}
|
|
}
|
|
if (func_t == T_GREATERTHAN)
|
|
return returnBool(lhs > rhs.toQStringRef());
|
|
return returnBool(lhs < rhs.toQStringRef());
|
|
}
|
|
case T_EQUALS:
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("%1(variable, value) requires two arguments.")
|
|
.arg(function.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
return returnBool(values(map(args.at(0))).join(statics.field_sep)
|
|
== args.at(1).toQString(m_tmp1));
|
|
case T_CLEAR: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("%1(variable) requires one argument.")
|
|
.arg(function.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
ProValueMap *hsh;
|
|
ProValueMap::Iterator it;
|
|
const ProKey &var = map(args.at(0));
|
|
if (!(hsh = findValues(var, &it)))
|
|
return ReturnFalse;
|
|
if (hsh == &m_valuemapStack.top())
|
|
it->clear();
|
|
else
|
|
m_valuemapStack.top()[var].clear();
|
|
return ReturnTrue;
|
|
}
|
|
case T_UNSET: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("%1(variable) requires one argument.")
|
|
.arg(function.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
ProValueMap *hsh;
|
|
ProValueMap::Iterator it;
|
|
const ProKey &var = map(args.at(0));
|
|
if (!(hsh = findValues(var, &it)))
|
|
return ReturnFalse;
|
|
if (m_valuemapStack.size() == 1)
|
|
hsh->erase(it);
|
|
else if (hsh == &m_valuemapStack.top())
|
|
*it = statics.fakeValue;
|
|
else
|
|
m_valuemapStack.top()[var] = statics.fakeValue;
|
|
return ReturnTrue;
|
|
}
|
|
#if QT_VERSION >= QT_VERSION_CHECK(5, 0, 0)
|
|
case T_PARSE_JSON: {
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("parseJson(variable, into) requires two arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
|
|
QByteArray json = values(args.at(0).toKey()).join(QLatin1Char(' ')).toUtf8();
|
|
QString parseInto = args.at(1).toQString(m_tmp2);
|
|
return parseJsonInto(json, parseInto, &m_valuemapStack.top());
|
|
}
|
|
#endif
|
|
case T_INCLUDE: {
|
|
if (args.count() < 1 || args.count() > 3) {
|
|
evalError(fL1S("include(file, [into, [silent]]) requires one, two or three arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
QString parseInto;
|
|
LoadFlags flags = 0;
|
|
if (m_cumulative)
|
|
flags = LoadSilent;
|
|
if (args.count() >= 2) {
|
|
if (!args.at(1).isEmpty())
|
|
parseInto = args.at(1) + QLatin1Char('.');
|
|
if (args.count() >= 3 && isTrue(args.at(2)))
|
|
flags = LoadSilent;
|
|
}
|
|
QString fn = resolvePath(m_option->expandEnvVars(args.at(0).toQString(m_tmp1)));
|
|
fn.detach();
|
|
VisitReturn ok;
|
|
if (parseInto.isEmpty()) {
|
|
ok = evaluateFileChecked(fn, QMakeHandler::EvalIncludeFile, LoadProOnly | flags);
|
|
} else {
|
|
ProValueMap symbols;
|
|
if ((ok = evaluateFileInto(fn, &symbols, LoadAll | flags)) == ReturnTrue) {
|
|
ProValueMap newMap;
|
|
for (ProValueMap::ConstIterator
|
|
it = m_valuemapStack.top().constBegin(),
|
|
end = m_valuemapStack.top().constEnd();
|
|
it != end; ++it) {
|
|
const ProString &ky = it.key();
|
|
if (!ky.startsWith(parseInto))
|
|
newMap[it.key()] = it.value();
|
|
}
|
|
for (ProValueMap::ConstIterator it = symbols.constBegin();
|
|
it != symbols.constEnd(); ++it) {
|
|
const QString &ky = it.key().toQString(m_tmp1);
|
|
if (!ky.startsWith(QLatin1Char('.')))
|
|
newMap.insert(ProKey(parseInto + ky), it.value());
|
|
}
|
|
m_valuemapStack.top() = newMap;
|
|
}
|
|
}
|
|
if (ok == ReturnFalse && (flags & LoadSilent))
|
|
ok = ReturnTrue;
|
|
return ok;
|
|
}
|
|
case T_LOAD: {
|
|
bool ignore_error = false;
|
|
if (args.count() == 2) {
|
|
ignore_error = isTrue(args.at(1));
|
|
} else if (args.count() != 1) {
|
|
evalError(fL1S("load(feature) requires one or two arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
VisitReturn ok = evaluateFeatureFile(m_option->expandEnvVars(args.at(0).toQString()),
|
|
ignore_error);
|
|
if (ok == ReturnFalse && ignore_error)
|
|
ok = ReturnTrue;
|
|
return ok;
|
|
}
|
|
case T_DEBUG: {
|
|
#ifdef PROEVALUATOR_DEBUG
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("debug(level, message) requires two arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
int level = args.at(0).toInt();
|
|
if (level <= m_debugLevel) {
|
|
const QString &msg = m_option->expandEnvVars(args.at(1).toQString(m_tmp2));
|
|
debugMsg(level, "Project DEBUG: %s", qPrintable(msg));
|
|
}
|
|
#endif
|
|
return ReturnTrue;
|
|
}
|
|
case T_LOG:
|
|
case T_ERROR:
|
|
case T_WARNING:
|
|
case T_MESSAGE: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("%1(message) requires one argument.")
|
|
.arg(function.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
const QString &msg = m_option->expandEnvVars(args.at(0).toQString(m_tmp2));
|
|
if (!m_skipLevel) {
|
|
if (func_t == T_LOG) {
|
|
#ifdef PROEVALUATOR_FULL
|
|
fputs(msg.toLatin1().constData(), stderr);
|
|
#endif
|
|
} else if (!msg.isEmpty() || func_t != T_ERROR) {
|
|
m_handler->fileMessage(
|
|
(func_t == T_ERROR ? QMakeHandler::ErrorMessage :
|
|
func_t == T_WARNING ? QMakeHandler::WarningMessage :
|
|
QMakeHandler::InfoMessage)
|
|
| (m_cumulative ? QMakeHandler::CumulativeEvalMessage : 0),
|
|
fL1S("Project %1: %2").arg(function.toQString(m_tmp1).toUpper(), msg));
|
|
}
|
|
}
|
|
return (func_t == T_ERROR && !m_cumulative) ? ReturnError : ReturnTrue;
|
|
}
|
|
case T_SYSTEM: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("system(exec) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
#ifdef PROEVALUATOR_FULL
|
|
if (m_cumulative) // Anything else would be insanity
|
|
return ReturnFalse;
|
|
#ifndef QT_BOOTSTRAPPED
|
|
QProcess proc;
|
|
proc.setProcessChannelMode(QProcess::ForwardedChannels);
|
|
runProcess(&proc, args.at(0).toQString(m_tmp2));
|
|
return returnBool(proc.exitStatus() == QProcess::NormalExit && proc.exitCode() == 0);
|
|
#else
|
|
int ec = system((QLatin1String("cd ")
|
|
+ IoUtils::shellQuote(QDir::toNativeSeparators(currentDirectory()))
|
|
+ QLatin1String(" && ") + args.at(0)).toLocal8Bit().constData());
|
|
# ifdef Q_OS_UNIX
|
|
if (ec != -1 && WIFSIGNALED(ec) && (WTERMSIG(ec) == SIGQUIT || WTERMSIG(ec) == SIGINT))
|
|
raise(WTERMSIG(ec));
|
|
# endif
|
|
return returnBool(ec == 0);
|
|
#endif
|
|
#else
|
|
return ReturnTrue;
|
|
#endif
|
|
}
|
|
case T_ISEMPTY: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("isEmpty(var) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
return returnBool(values(map(args.at(0))).isEmpty());
|
|
}
|
|
case T_EXISTS: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("exists(file) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
const QString &file = resolvePath(m_option->expandEnvVars(args.at(0).toQString(m_tmp1)));
|
|
|
|
// Don't use VFS here:
|
|
// - it supports neither listing nor even directories
|
|
// - it's unlikely that somebody would test for files they created themselves
|
|
if (IoUtils::exists(file))
|
|
return ReturnTrue;
|
|
int slsh = file.lastIndexOf(QLatin1Char('/'));
|
|
QString fn = file.mid(slsh+1);
|
|
if (fn.contains(QLatin1Char('*')) || fn.contains(QLatin1Char('?'))) {
|
|
QString dirstr = file.left(slsh+1);
|
|
if (!QDir(dirstr).entryList(QStringList(fn)).isEmpty())
|
|
return ReturnTrue;
|
|
}
|
|
|
|
return ReturnFalse;
|
|
}
|
|
case T_MKPATH: {
|
|
if (args.count() != 1) {
|
|
evalError(fL1S("mkpath(file) requires one argument."));
|
|
return ReturnFalse;
|
|
}
|
|
#ifdef PROEVALUATOR_FULL
|
|
const QString &fn = resolvePath(args.at(0).toQString(m_tmp1));
|
|
if (!QDir::current().mkpath(fn)) {
|
|
evalError(fL1S("Cannot create directory %1.").arg(QDir::toNativeSeparators(fn)));
|
|
return ReturnFalse;
|
|
}
|
|
#endif
|
|
return ReturnTrue;
|
|
}
|
|
case T_WRITE_FILE: {
|
|
if (args.count() > 3) {
|
|
evalError(fL1S("write_file(name, [content var, [append] [exe]]) requires one to three arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
QIODevice::OpenMode mode = QIODevice::Truncate;
|
|
bool exe = false;
|
|
QString contents;
|
|
if (args.count() >= 2) {
|
|
const ProStringList &vals = values(args.at(1).toKey());
|
|
if (!vals.isEmpty())
|
|
contents = vals.join(QLatin1Char('\n')) + QLatin1Char('\n');
|
|
if (args.count() >= 3) {
|
|
const auto opts = split_value_list(args.at(2).toQStringRef());
|
|
for (const ProString &opt : opts) {
|
|
opt.toQString(m_tmp3);
|
|
if (m_tmp3 == QLatin1String("append")) {
|
|
mode = QIODevice::Append;
|
|
} else if (m_tmp3 == QLatin1String("exe")) {
|
|
exe = true;
|
|
} else {
|
|
evalError(fL1S("write_file(): invalid flag %1.").arg(m_tmp3));
|
|
return ReturnFalse;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
QString path = resolvePath(args.at(0).toQString(m_tmp1));
|
|
path.detach(); // make sure to not leak m_tmp1 into the map of written files.
|
|
return writeFile(QString(), path, mode, exe, contents);
|
|
}
|
|
case T_TOUCH: {
|
|
if (args.count() != 2) {
|
|
evalError(fL1S("touch(file, reffile) requires two arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
#ifdef PROEVALUATOR_FULL
|
|
const QString &tfn = resolvePath(args.at(0).toQString(m_tmp1));
|
|
const QString &rfn = resolvePath(args.at(1).toQString(m_tmp2));
|
|
#ifdef Q_OS_UNIX
|
|
struct stat st;
|
|
if (stat(rfn.toLocal8Bit().constData(), &st)) {
|
|
evalError(fL1S("Cannot stat() reference file %1: %2.").arg(rfn, fL1S(strerror(errno))));
|
|
return ReturnFalse;
|
|
}
|
|
struct utimbuf utb;
|
|
utb.actime = time(0);
|
|
utb.modtime = st.st_mtime;
|
|
if (utime(tfn.toLocal8Bit().constData(), &utb)) {
|
|
evalError(fL1S("Cannot touch %1: %2.").arg(tfn, fL1S(strerror(errno))));
|
|
return ReturnFalse;
|
|
}
|
|
#else
|
|
HANDLE rHand = CreateFile((wchar_t*)rfn.utf16(),
|
|
GENERIC_READ, FILE_SHARE_READ,
|
|
NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
|
|
if (rHand == INVALID_HANDLE_VALUE) {
|
|
evalError(fL1S("Cannot open reference file %1: %2").arg(rfn, windowsErrorCode()));
|
|
return ReturnFalse;
|
|
}
|
|
FILETIME ft;
|
|
GetFileTime(rHand, 0, 0, &ft);
|
|
CloseHandle(rHand);
|
|
HANDLE wHand = CreateFile((wchar_t*)tfn.utf16(),
|
|
GENERIC_WRITE, FILE_SHARE_READ,
|
|
NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
|
|
if (wHand == INVALID_HANDLE_VALUE) {
|
|
evalError(fL1S("Cannot open %1: %2").arg(tfn, windowsErrorCode()));
|
|
return ReturnFalse;
|
|
}
|
|
SetFileTime(wHand, 0, 0, &ft);
|
|
CloseHandle(wHand);
|
|
#endif
|
|
#endif
|
|
return ReturnTrue;
|
|
}
|
|
case T_CACHE: {
|
|
if (args.count() > 3) {
|
|
evalError(fL1S("cache(var, [set|add|sub] [transient] [super|stash], [srcvar]) requires one to three arguments."));
|
|
return ReturnFalse;
|
|
}
|
|
bool persist = true;
|
|
enum { TargetStash, TargetCache, TargetSuper } target = TargetCache;
|
|
enum { CacheSet, CacheAdd, CacheSub } mode = CacheSet;
|
|
ProKey srcvar;
|
|
if (args.count() >= 2) {
|
|
const auto opts = split_value_list(args.at(1).toQStringRef());
|
|
for (const ProString &opt : opts) {
|
|
opt.toQString(m_tmp3);
|
|
if (m_tmp3 == QLatin1String("transient")) {
|
|
persist = false;
|
|
} else if (m_tmp3 == QLatin1String("super")) {
|
|
target = TargetSuper;
|
|
} else if (m_tmp3 == QLatin1String("stash")) {
|
|
target = TargetStash;
|
|
} else if (m_tmp3 == QLatin1String("set")) {
|
|
mode = CacheSet;
|
|
} else if (m_tmp3 == QLatin1String("add")) {
|
|
mode = CacheAdd;
|
|
} else if (m_tmp3 == QLatin1String("sub")) {
|
|
mode = CacheSub;
|
|
} else {
|
|
evalError(fL1S("cache(): invalid flag %1.").arg(m_tmp3));
|
|
return ReturnFalse;
|
|
}
|
|
}
|
|
if (args.count() >= 3) {
|
|
srcvar = args.at(2).toKey();
|
|
} else if (mode != CacheSet) {
|
|
evalError(fL1S("cache(): modes other than 'set' require a source variable."));
|
|
return ReturnFalse;
|
|
}
|
|
}
|
|
QString varstr;
|
|
ProKey dstvar = args.at(0).toKey();
|
|
if (!dstvar.isEmpty()) {
|
|
if (srcvar.isEmpty())
|
|
srcvar = dstvar;
|
|
ProValueMap::Iterator srcvarIt;
|
|
if (!findValues(srcvar, &srcvarIt)) {
|
|
evalError(fL1S("Variable %1 is not defined.").arg(srcvar.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
// The caches for the host and target may differ (e.g., when we are manipulating
|
|
// CONFIG), so we cannot compute a common new value for both.
|
|
const ProStringList &diffval = *srcvarIt;
|
|
ProStringList newval;
|
|
bool changed = false;
|
|
for (bool hostBuild = false; ; hostBuild = true) {
|
|
#ifdef PROEVALUATOR_THREAD_SAFE
|
|
m_option->mutex.lock();
|
|
#endif
|
|
QMakeBaseEnv *baseEnv =
|
|
m_option->baseEnvs.value(QMakeBaseKey(m_buildRoot, m_stashfile, hostBuild));
|
|
#ifdef PROEVALUATOR_THREAD_SAFE
|
|
// It's ok to unlock this before locking baseEnv,
|
|
// as we have no intention to initialize the env.
|
|
m_option->mutex.unlock();
|
|
#endif
|
|
do {
|
|
if (!baseEnv)
|
|
break;
|
|
#ifdef PROEVALUATOR_THREAD_SAFE
|
|
QMutexLocker locker(&baseEnv->mutex);
|
|
if (baseEnv->inProgress && baseEnv->evaluator != this) {
|
|
// The env is still in the works, but it may be already past the cache
|
|
// loading. So we need to wait for completion and amend it as usual.
|
|
QThreadPool::globalInstance()->releaseThread();
|
|
baseEnv->cond.wait(&baseEnv->mutex);
|
|
QThreadPool::globalInstance()->reserveThread();
|
|
}
|
|
if (!baseEnv->isOk)
|
|
break;
|
|
#endif
|
|
QMakeEvaluator *baseEval = baseEnv->evaluator;
|
|
const ProStringList &oldval = baseEval->values(dstvar);
|
|
if (mode == CacheSet) {
|
|
newval = diffval;
|
|
} else {
|
|
newval = oldval;
|
|
if (mode == CacheAdd)
|
|
newval += diffval;
|
|
else
|
|
newval.removeEach(diffval);
|
|
}
|
|
if (oldval != newval) {
|
|
if (target != TargetStash || !m_stashfile.isEmpty()) {
|
|
baseEval->valuesRef(dstvar) = newval;
|
|
if (target == TargetSuper) {
|
|
do {
|
|
if (dstvar == QLatin1String("QMAKEPATH")) {
|
|
baseEval->m_qmakepath = newval.toQStringList();
|
|
baseEval->updateMkspecPaths();
|
|
} else if (dstvar == QLatin1String("QMAKEFEATURES")) {
|
|
baseEval->m_qmakefeatures = newval.toQStringList();
|
|
} else {
|
|
break;
|
|
}
|
|
baseEval->updateFeaturePaths();
|
|
if (hostBuild == m_hostBuild)
|
|
m_featureRoots = baseEval->m_featureRoots;
|
|
} while (false);
|
|
}
|
|
}
|
|
changed = true;
|
|
}
|
|
} while (false);
|
|
if (hostBuild)
|
|
break;
|
|
}
|
|
// We assume that whatever got the cached value to be what it is now will do so
|
|
// the next time as well, so we just skip the persisting if nothing changed.
|
|
if (!persist || !changed)
|
|
return ReturnTrue;
|
|
varstr = dstvar.toQString();
|
|
if (mode == CacheAdd)
|
|
varstr += QLatin1String(" +=");
|
|
else if (mode == CacheSub)
|
|
varstr += QLatin1String(" -=");
|
|
else
|
|
varstr += QLatin1String(" =");
|
|
if (diffval.count() == 1) {
|
|
varstr += QLatin1Char(' ');
|
|
varstr += quoteValue(diffval.at(0));
|
|
} else if (!diffval.isEmpty()) {
|
|
for (const ProString &vval : diffval) {
|
|
varstr += QLatin1String(" \\\n ");
|
|
varstr += quoteValue(vval);
|
|
}
|
|
}
|
|
varstr += QLatin1Char('\n');
|
|
}
|
|
QString fn;
|
|
if (target == TargetSuper) {
|
|
if (m_superfile.isEmpty()) {
|
|
m_superfile = QDir::cleanPath(m_outputDir + QLatin1String("/.qmake.super"));
|
|
printf("Info: creating super cache file %s\n", qPrintable(QDir::toNativeSeparators(m_superfile)));
|
|
valuesRef(ProKey("_QMAKE_SUPER_CACHE_")) << ProString(m_superfile);
|
|
}
|
|
fn = m_superfile;
|
|
} else if (target == TargetCache) {
|
|
if (m_cachefile.isEmpty()) {
|
|
m_cachefile = QDir::cleanPath(m_outputDir + QLatin1String("/.qmake.cache"));
|
|
printf("Info: creating cache file %s\n", qPrintable(QDir::toNativeSeparators(m_cachefile)));
|
|
valuesRef(ProKey("_QMAKE_CACHE_")) << ProString(m_cachefile);
|
|
// We could update m_{source,build}Root and m_featureRoots here, or even
|
|
// "re-home" our rootEnv, but this doesn't sound too useful - if somebody
|
|
// wanted qmake to find something in the build directory, he could have
|
|
// done so "from the outside".
|
|
// The sub-projects will find the new cache all by themselves.
|
|
}
|
|
fn = m_cachefile;
|
|
} else {
|
|
fn = m_stashfile;
|
|
if (fn.isEmpty())
|
|
fn = QDir::cleanPath(m_outputDir + QLatin1String("/.qmake.stash"));
|
|
if (!m_vfs->exists(fn)) {
|
|
printf("Info: creating stash file %s\n", qPrintable(QDir::toNativeSeparators(fn)));
|
|
valuesRef(ProKey("_QMAKE_STASH_")) << ProString(fn);
|
|
}
|
|
}
|
|
return writeFile(fL1S("cache "), fn, QIODevice::Append, false, varstr);
|
|
}
|
|
case T_RELOAD_PROPERTIES:
|
|
#ifdef QT_BUILD_QMAKE
|
|
m_option->reloadProperties();
|
|
#endif
|
|
return ReturnTrue;
|
|
default:
|
|
evalError(fL1S("Function '%1' is not implemented.").arg(function.toQString(m_tmp1)));
|
|
return ReturnFalse;
|
|
}
|
|
}
|
|
|
|
QT_END_NAMESPACE
|