qt5base-lts/mkspecs/unsupported/integrity-ghs/qplatformdefs.h
Matti Paaso 974c210835 Update license headers and add new license files
- Renamed LICENSE.LGPL to LICENSE.LGPLv21
- Added LICENSE.LGPLv3
- Removed LICENSE.GPL

Change-Id: Iec3406e3eb3f133be549092015cefe33d259a3f2
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
2014-09-24 12:26:19 +02:00

199 lines
5.9 KiB
C

/****************************************************************************
**
** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the QtGui module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL21$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia. For licensing terms and
** conditions see http://qt.digia.com/licensing. For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 or version 3 as published by the Free
** Software Foundation and appearing in the file LICENSE.LGPLv21 and
** LICENSE.LGPLv3 included in the packaging of this file. Please review the
** following information to ensure the GNU Lesser General Public License
** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights. These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** $QT_END_LICENSE$
**
****************************************************************************/
// Get Qt defines/settings
#include "qglobal.h"
// Set any POSIX/XOPEN defines at the top of this file to turn on specific APIs
#include <unistd.h>
// We are hot - unistd.h should have turned on the specific APIs we requested
#include <pthread.h>
#include <dirent.h>
#include <fcntl.h>
#include <grp.h>
#include <pwd.h>
#include <signal.h>
#include <dlfcn.h>
#include <limits.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <netinet/in.h>
#ifndef QT_NO_IPV6IFNAME
#include <net/if.h>
#endif
#ifdef QT_LARGEFILE_SUPPORT
#define QT_STATBUF struct stat64
#define QT_STATBUF4TSTAT struct stat64
#define QT_STAT ::stat64
#define QT_FSTAT ::fstat64
#define QT_LSTAT ::lstat64
#define QT_OPEN ::open64
#define QT_TRUNCATE ::truncate64
#define QT_FTRUNCATE ::ftruncate64
#define QT_LSEEK ::lseek64
#else
#define QT_STATBUF struct stat
#define QT_STATBUF4TSTAT struct stat
#define QT_STAT ::stat
#define QT_FSTAT ::fstat
#define QT_LSTAT ::lstat
#define QT_OPEN ::open
#define QT_TRUNCATE ::truncate
#define QT_FTRUNCATE ::ftruncate
#define QT_LSEEK ::lseek
#define QT_OPEN_LARGEFILE 0
#endif
#ifdef QT_LARGEFILE_SUPPORT
#define QT_FOPEN ::fopen64
#define QT_FSEEK ::fseeko64
#define QT_FTELL ::ftello64
#define QT_FGETPOS ::fgetpos64
#define QT_FSETPOS ::fsetpos64
#define QT_FPOS_T fpos64_t
#define QT_OFF_T off64_t
#else
#define QT_FOPEN ::fopen
#define QT_FSEEK ::fseek
#define QT_FTELL ::ftell
#define QT_FGETPOS ::fgetpos
#define QT_FSETPOS ::fsetpos
#define QT_FPOS_T fpos_t
#define QT_OFF_T long
#endif
#define QT_STAT_REG S_IFREG
#define QT_STAT_DIR S_IFDIR
#define QT_STAT_MASK S_IFMT
#define QT_STAT_LNK S_IFLNK
#define QT_SOCKET_CONNECT ::connect
#define QT_SOCKET_BIND ::bind
#define QT_FILENO fileno
#ifndef QT_CLOSE
#define QT_CLOSE ::close
#endif
#ifndef QT_READ
#define QT_READ ::read
#endif
#ifndef QT_WRITE
#define QT_WRITE ::write
#endif
#define QT_ACCESS ::access
#define QT_GETCWD ::getcwd
#define QT_CHDIR ::chdir
#define QT_MKDIR ::mkdir
#define QT_RMDIR ::rmdir
#define QT_OPEN_RDONLY O_RDONLY
#define QT_OPEN_WRONLY O_WRONLY
#define QT_OPEN_RDWR O_RDWR
#define QT_OPEN_CREAT O_CREAT
#define QT_OPEN_TRUNC O_TRUNC
#define QT_OPEN_APPEND O_APPEND
#define QT_SIGNAL_RETTYPE void
#define QT_SIGNAL_ARGS int
#define QT_SIGNAL_IGNORE SIG_IGN
#define QT_MMAP ::mmap
// Directory iteration
#define QT_DIR DIR
#define QT_OPENDIR ::opendir
#define QT_CLOSEDIR ::closedir
#if defined(QT_LARGEFILE_SUPPORT) \
&& defined(QT_USE_XOPEN_LFS_EXTENSIONS) \
&& !defined(QT_NO_READDIR64)
# define QT_DIRENT struct dirent64
# define QT_READDIR ::readdir64
# define QT_READDIR_R ::readdir64_r
#else
# define QT_DIRENT struct dirent
# define QT_READDIR ::readdir
# define QT_READDIR_R ::readdir_r
#endif
#define QT_SOCKLEN_T socklen_t
#if defined(_XOPEN_SOURCE) && (_XOPEN_SOURCE >= 500)
#define QT_SNPRINTF ::snprintf
#define QT_VSNPRINTF ::vsnprintf
#endif
// INTEGRITY doesn't enable the declaration in _POSIX_SOURCE mode,
// because strdup() is not part of strict Posix; declare it here
extern "C" char *strdup(const char *src);
#ifndef MAXNAMLEN
# define MAXNAMLEN NAME_MAX
#endif
#ifndef PATH_MAX
# define PATH_MAX MAXPATHLEN
#endif
#ifndef NSIG
# define NSIG _SIGMAX
#endif
#ifndef MAP_ANON
# define MAP_ANON 0
#endif
typedef void (*sighandler_t)(int);
#ifndef QT_NO_MMAP
# define QT_NO_MMAP
#endif
#ifndef QT_NO_SHAREDMEMORY
# define QT_NO_SHAREDMEMORY
#endif
#ifndef QT_NO_SYSTEMSEMAPHORE
# define QT_NO_SYSTEMSEMAPHORE
#endif