qt5base-lts/examples/mainwindows/mdi/mainwindow.cpp

/****************************************************************************
**
** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
**     the names of its contributors may be used to endorse or promote
**     products derived from this software without specific prior written
**     permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
** $QT_END_LICENSE$
**
****************************************************************************/

#include <QtWidgets>

#include "mainwindow.h"
#include "mdichild.h"

MainWindow::MainWindow()
{
    mdiArea = new QMdiArea;
    mdiArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAsNeeded);
    mdiArea->setVerticalScrollBarPolicy(Qt::ScrollBarAsNeeded);
    setCentralWidget(mdiArea);
    connect(mdiArea, SIGNAL(subWindowActivated(QMdiSubWindow*)),
            this, SLOT(updateMenus()));
    windowMapper = new QSignalMapper(this);
    connect(windowMapper, SIGNAL(mapped(QWidget*)),
            this, SLOT(setActiveSubWindow(QWidget*)));

    createActions();
    createMenus();
    createToolBars();
    createStatusBar();
    updateMenus();

    readSettings();

    setWindowTitle(tr("MDI"));
    setUnifiedTitleAndToolBarOnMac(true);
}

void MainWindow::closeEvent(QCloseEvent *event)
{
    mdiArea->closeAllSubWindows();
    if (mdiArea->currentSubWindow()) {
        event->ignore();
    } else {
        writeSettings();
        event->accept();
    }
}

void MainWindow::newFile()
{
    MdiChild *child = createMdiChild();
    child->newFile();
    child->show();
}

void MainWindow::open()
{
    QString fileName = QFileDialog::getOpenFileName(this);
    if (!fileName.isEmpty()) {
        QMdiSubWindow *existing = findMdiChild(fileName);
        if (existing) {
            mdiArea->setActiveSubWindow(existing);
            return;
        }

        MdiChild *child = createMdiChild();
        if (child->loadFile(fileName)) {
            statusBar()->showMessage(tr("File loaded"), 2000);
            child->show();
        } else {
            child->close();
        }
    }
}

void MainWindow::save()
{
    if (activeMdiChild() && activeMdiChild()->save())
        statusBar()->showMessage(tr("File saved"), 2000);
}

void MainWindow::saveAs()
{
    if (activeMdiChild() && activeMdiChild()->saveAs())
        statusBar()->showMessage(tr("File saved"), 2000);
}

void MainWindow::cut()
{
    if (activeMdiChild())
        activeMdiChild()->cut();
}

void MainWindow::copy()
{
    if (activeMdiChild())
        activeMdiChild()->copy();
}

void MainWindow::paste()
{
    if (activeMdiChild())
        activeMdiChild()->paste();
}

void MainWindow::about()
{
   QMessageBox::about(this, tr("About MDI"),
            tr("The <b>MDI</b> example demonstrates how to write multiple "
               "document interface applications using Qt."));
}

void MainWindow::updateMenus()
{
    bool hasMdiChild = (activeMdiChild() != 0);
    saveAct->setEnabled(hasMdiChild);
    saveAsAct->setEnabled(hasMdiChild);
    pasteAct->setEnabled(hasMdiChild);
    closeAct->setEnabled(hasMdiChild);
    closeAllAct->setEnabled(hasMdiChild);
    tileAct->setEnabled(hasMdiChild);
    cascadeAct->setEnabled(hasMdiChild);
    nextAct->setEnabled(hasMdiChild);
    previousAct->setEnabled(hasMdiChild);
    separatorAct->setVisible(hasMdiChild);

    bool hasSelection = (activeMdiChild() &&
                         activeMdiChild()->textCursor().hasSelection());
    cutAct->setEnabled(hasSelection);
    copyAct->setEnabled(hasSelection);
}

void MainWindow::updateWindowMenu()
{
    windowMenu->clear();
    windowMenu->addAction(closeAct);
    windowMenu->addAction(closeAllAct);
    windowMenu->addSeparator();
    windowMenu->addAction(tileAct);
    windowMenu->addAction(cascadeAct);
    windowMenu->addSeparator();
    windowMenu->addAction(nextAct);
    windowMenu->addAction(previousAct);
    windowMenu->addAction(separatorAct);

    QList<QMdiSubWindow *> windows = mdiArea->subWindowList();
    separatorAct->setVisible(!windows.isEmpty());

    for (int i = 0; i < windows.size(); ++i) {
        MdiChild *child = qobject_cast<MdiChild *>(windows.at(i)->widget());

        QString text;
        if (i < 9) {
            text = tr("&%1 %2").arg(i + 1)
                               .arg(child->userFriendlyCurrentFile());
        } else {
            text = tr("%1 %2").arg(i + 1)
                              .arg(child->userFriendlyCurrentFile());
        }
        QAction *action  = windowMenu->addAction(text);
        action->setCheckable(true);
        action ->setChecked(child == activeMdiChild());
        connect(action, SIGNAL(triggered()), windowMapper, SLOT(map()));
        windowMapper->setMapping(action, windows.at(i));
    }
}

MdiChild *MainWindow::createMdiChild()
{
    MdiChild *child = new MdiChild;
    mdiArea->addSubWindow(child);

    connect(child, SIGNAL(copyAvailable(bool)),
            cutAct, SLOT(setEnabled(bool)));
    connect(child, SIGNAL(copyAvailable(bool)),
            copyAct, SLOT(setEnabled(bool)));

    return child;
}

void MainWindow::createActions()
{
    newAct = new QAction(QIcon(":/images/new.png"), tr("&New"), this);
    newAct->setShortcuts(QKeySequence::New);
    newAct->setStatusTip(tr("Create a new file"));
    connect(newAct, SIGNAL(triggered()), this, SLOT(newFile()));

    openAct = new QAction(QIcon(":/images/open.png"), tr("&Open..."), this);
    openAct->setShortcuts(QKeySequence::Open);
    openAct->setStatusTip(tr("Open an existing file"));
    connect(openAct, SIGNAL(triggered()), this, SLOT(open()));

    saveAct = new QAction(QIcon(":/images/save.png"), tr("&Save"), this);
    saveAct->setShortcuts(QKeySequence::Save);
    saveAct->setStatusTip(tr("Save the document to disk"));
    connect(saveAct, SIGNAL(triggered()), this, SLOT(save()));

    saveAsAct = new QAction(tr("Save &As..."), this);
    saveAsAct->setShortcuts(QKeySequence::SaveAs);
    saveAsAct->setStatusTip(tr("Save the document under a new name"));
    connect(saveAsAct, SIGNAL(triggered()), this, SLOT(saveAs()));

//! [0]
    exitAct = new QAction(tr("E&xit"), this);
    exitAct->setShortcuts(QKeySequence::Quit);
    exitAct->setStatusTip(tr("Exit the application"));
    connect(exitAct, SIGNAL(triggered()), qApp, SLOT(closeAllWindows()));
//! [0]

    cutAct = new QAction(QIcon(":/images/cut.png"), tr("Cu&t"), this);
    cutAct->setShortcuts(QKeySequence::Cut);
    cutAct->setStatusTip(tr("Cut the current selection's contents to the "
                            "clipboard"));
    connect(cutAct, SIGNAL(triggered()), this, SLOT(cut()));

    copyAct = new QAction(QIcon(":/images/copy.png"), tr("&Copy"), this);
    copyAct->setShortcuts(QKeySequence::Copy);
    copyAct->setStatusTip(tr("Copy the current selection's contents to the "
                             "clipboard"));
    connect(copyAct, SIGNAL(triggered()), this, SLOT(copy()));

    pasteAct = new QAction(QIcon(":/images/paste.png"), tr("&Paste"), this);
    pasteAct->setShortcuts(QKeySequence::Paste);
    pasteAct->setStatusTip(tr("Paste the clipboard's contents into the current "
                              "selection"));
    connect(pasteAct, SIGNAL(triggered()), this, SLOT(paste()));

    closeAct = new QAction(tr("Cl&ose"), this);
    closeAct->setStatusTip(tr("Close the active window"));
    connect(closeAct, SIGNAL(triggered()),
            mdiArea, SLOT(closeActiveSubWindow()));

    closeAllAct = new QAction(tr("Close &All"), this);
    closeAllAct->setStatusTip(tr("Close all the windows"));
    connect(closeAllAct, SIGNAL(triggered()),
            mdiArea, SLOT(closeAllSubWindows()));

    tileAct = new QAction(tr("&Tile"), this);
    tileAct->setStatusTip(tr("Tile the windows"));
    connect(tileAct, SIGNAL(triggered()), mdiArea, SLOT(tileSubWindows()));

    cascadeAct = new QAction(tr("&Cascade"), this);
    cascadeAct->setStatusTip(tr("Cascade the windows"));
    connect(cascadeAct, SIGNAL(triggered()), mdiArea, SLOT(cascadeSubWindows()));

    nextAct = new QAction(tr("Ne&xt"), this);
    nextAct->setShortcuts(QKeySequence::NextChild);
    nextAct->setStatusTip(tr("Move the focus to the next window"));
    connect(nextAct, SIGNAL(triggered()),
            mdiArea, SLOT(activateNextSubWindow()));

    previousAct = new QAction(tr("Pre&vious"), this);
    previousAct->setShortcuts(QKeySequence::PreviousChild);
    previousAct->setStatusTip(tr("Move the focus to the previous "
                                 "window"));
    connect(previousAct, SIGNAL(triggered()),
            mdiArea, SLOT(activatePreviousSubWindow()));

    separatorAct = new QAction(this);
    separatorAct->setSeparator(true);

    aboutAct = new QAction(tr("&About"), this);
    aboutAct->setStatusTip(tr("Show the application's About box"));
    connect(aboutAct, SIGNAL(triggered()), this, SLOT(about()));

    aboutQtAct = new QAction(tr("About &Qt"), this);
    aboutQtAct->setStatusTip(tr("Show the Qt library's About box"));
    connect(aboutQtAct, SIGNAL(triggered()), qApp, SLOT(aboutQt()));
}

void MainWindow::createMenus()
{
    fileMenu = menuBar()->addMenu(tr("&File"));
    fileMenu->addAction(newAct);
    fileMenu->addAction(openAct);
    fileMenu->addAction(saveAct);
    fileMenu->addAction(saveAsAct);
    fileMenu->addSeparator();
    QAction *action = fileMenu->addAction(tr("Switch layout direction"));
    connect(action, SIGNAL(triggered()), this, SLOT(switchLayoutDirection()));
    fileMenu->addAction(exitAct);

    editMenu = menuBar()->addMenu(tr("&Edit"));
    editMenu->addAction(cutAct);
    editMenu->addAction(copyAct);
    editMenu->addAction(pasteAct);

    windowMenu = menuBar()->addMenu(tr("&Window"));
    updateWindowMenu();
    connect(windowMenu, SIGNAL(aboutToShow()), this, SLOT(updateWindowMenu()));

    menuBar()->addSeparator();

    helpMenu = menuBar()->addMenu(tr("&Help"));
    helpMenu->addAction(aboutAct);
    helpMenu->addAction(aboutQtAct);
}

void MainWindow::createToolBars()
{
    fileToolBar = addToolBar(tr("File"));
    fileToolBar->addAction(newAct);
    fileToolBar->addAction(openAct);
    fileToolBar->addAction(saveAct);

    editToolBar = addToolBar(tr("Edit"));
    editToolBar->addAction(cutAct);
    editToolBar->addAction(copyAct);
    editToolBar->addAction(pasteAct);
}

void MainWindow::createStatusBar()
{
    statusBar()->showMessage(tr("Ready"));
}

void MainWindow::readSettings()
{
    QSettings settings("Trolltech", "MDI Example");
    QPoint pos = settings.value("pos", QPoint(200, 200)).toPoint();
    QSize size = settings.value("size", QSize(400, 400)).toSize();
    move(pos);
    resize(size);
}

void MainWindow::writeSettings()
{
    QSettings settings("Trolltech", "MDI Example");
    settings.setValue("pos", pos());
    settings.setValue("size", size());
}

MdiChild *MainWindow::activeMdiChild()
{
    if (QMdiSubWindow *activeSubWindow = mdiArea->activeSubWindow())
        return qobject_cast<MdiChild *>(activeSubWindow->widget());
    return 0;
}

QMdiSubWindow *MainWindow::findMdiChild(const QString &fileName)
{
    QString canonicalFilePath = QFileInfo(fileName).canonicalFilePath();

    foreach (QMdiSubWindow *window, mdiArea->subWindowList()) {
        MdiChild *mdiChild = qobject_cast<MdiChild *>(window->widget());
        if (mdiChild->currentFile() == canonicalFilePath)
            return window;
    }
    return 0;
}

void MainWindow::switchLayoutDirection()
{
    if (layoutDirection() == Qt::LeftToRight)
        qApp->setLayoutDirection(Qt::RightToLeft);
    else
        qApp->setLayoutDirection(Qt::LeftToRight);
}

void MainWindow::setActiveSubWindow(QWidget *window)
{
    if (!window)
        return;
    mdiArea->setActiveSubWindow(qobject_cast<QMdiSubWindow *>(window));
}