qt5base-lts/mkspecs/devices/linux-arm-trident-pnx8473-g++/qmake.conf
Axel Waggershauser 5fcf441392 Fix '=' alignment and replace tabs in *.conf (whitespace only change)
Replace all tabs with proper space characters and consistently align
the '=' characters. The default alignment for the '=' of 25 characters
has been left as is to get a minimal diff. Lines with the '=' further
to the right and those belonging to 'proper code (TM)' have not been
touched.

The work was mostly done using the following python script (might
come in handy again...):

import sys, re
indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character
p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)')

for fn in sys.argv[1:]:
    with open(fn, 'r+') as f:
        lines = []
        nl_count = 0
        continuity_indent = None
        for l in f:
            m = p.match(l)
            nl = l
            if m:
                n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1))
                if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0:
                    n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4
                n_spaces = max(1, n_spaces) # we want at least one space before '='/'+='
                nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n'
                continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$'
            elif continuity_indent:
                nl = ' '*continuity_indent + l.lstrip()
                if l[-2] != '\\': # check when to stop the continuation
                    continuity_indent = None
            elif l.startswith('#'):
                nl = l.expandtabs(2)
            if l != nl:
                nl_count += 1
            lines.append(nl)
        if nl_count > 0:
            print fn, nl_count, len(lines)
            f.seek(0)
            f.writelines(lines)
            f.truncate()

Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-27 17:16:37 +01:00

64 lines
3.1 KiB
Plaintext

#
# qmake configuration for building with arm-linux-uclibcgnueabi-g++
#
# http://wiki.qt-project.org/Devices/Shiner
#
MAKEFILE_GENERATOR = UNIX
CONFIG += incremental gdb_dwarf_index
QMAKE_INCREMENTAL_STYLE = sublib
include(../../common/linux.conf)
include(../../common/gcc-base-unix.conf)
include(../../common/g++-unix.conf)
load(device_config)
# Sanity checks
isEmpty(TRIDENT_SHINER_SDK_BUILDTREE): error("TRIDENT_SHINER_SDK_BUILDTREE needs to be set via -device-option TRIDENT_SHINER_SDK_BUILDTREE=<path>")
isEmpty(TRIDENT_SHINER_SDK_BUILDSPEC): error("TRIDENT_SHINER_SDK_BUILDSPEC needs to be set via -device-option TRIDENT_SHINER_SDK_BUILDSPEC=<build spec>")
isEmpty(TRIDENT_SHINER_SDK_INCDIR_EGL_OPENGL_ES2): error("TRIDENT_SHINER_SDK_INCDIR_EGL_OPENGL_ES2 needs to be set via -device-option TRIDENT_SHINER_SDK_INCDIR_EGL_OPENGL_ES2=<path>")
isEmpty(TRIDENT_SHINER_SDK_LIBDIR_EGL_OPENGL_ES2): error("TRIDENT_SHINER_SDK_LIBDIR_EGL_OPENGL_ES2 needs to be set via -device-option TRIDENT_SHINER_SDK_LIBDIR_EGL_OPENGL_ES2=<path>")
QMAKE_CC = $${CROSS_COMPILE}gcc
QMAKE_CXX = $${CROSS_COMPILE}g++
QMAKE_LINK = $${CROSS_COMPILE}g++
QMAKE_LINK_SHLIB = $${CROSS_COMPILE}g++
#
# Usage configure options "-sysroot <sysroot path>" with "--prefix=<qt installation path>" results into installation of Qt at "<sysroot path><qt installation path>".
# Trident Shiner SDK expects all libs to be in "Application file system" which is not <sysroot path>
#
# Because of this fact not using "-sysroot <sysroot path>" and hence following code is required
#
QMAKE_CFLAGS += --sysroot=$${TRIDENT_SHINER_SDK_BUILDTREE}/open_source_archive/linux/toolchains/gcc-4.5.2_uclibc/
QMAKE_CXXFLAGS += --sysroot=$${TRIDENT_SHINER_SDK_BUILDTREE}/open_source_archive/linux/toolchains/gcc-4.5.2_uclibc/
QMAKE_LFLAGS += --sysroot=$${TRIDENT_SHINER_SDK_BUILDTREE}/open_source_archive/linux/toolchains/gcc-4.5.2_uclibc/
deviceSanityCheckCompiler()
QMAKE_CFLAGS = -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard
QMAKE_CXXFLAGS = $$QMAKE_CFLAGS
# modifications to linux.conf
QMAKE_AR = $${CROSS_COMPILE}ar cqs
QMAKE_OBJCOPY = $${CROSS_COMPILE}objcopy
QMAKE_STRIP = $${CROSS_COMPILE}strip
QMAKE_INCDIR += $${TRIDENT_SHINER_SDK_BUILDTREE}/target/output/objs/$${TRIDENT_SHINER_SDK_BUILDSPEC}/comps/generic_apps/usr/include
QMAKE_LIBDIR += $${TRIDENT_SHINER_SDK_BUILDTREE}/target/output/objs/$${TRIDENT_SHINER_SDK_BUILDSPEC}/comps/generic_apps/usr/lib
QMAKE_LIBDIR += $${TRIDENT_SHINER_SDK_BUILDTREE}/target/output/objs/$${TRIDENT_SHINER_SDK_BUILDSPEC}/comps/generated/lib/armgnu_linux_el_cortex-a9
QMAKE_INCDIR_EGL = $${TRIDENT_SHINER_SDK_INCDIR_EGL_OPENGL_ES2}
QMAKE_LIBDIR_EGL = $${TRIDENT_SHINER_SDK_LIBDIR_EGL_OPENGL_ES2}
QMAKE_INCDIR_OPENGL_ES2 = $${TRIDENT_SHINER_SDK_INCDIR_EGL_OPENGL_ES2}
QMAKE_LIBDIR_OPENGL_ES2 = $${TRIDENT_SHINER_SDK_LIBDIR_EGL_OPENGL_ES2}
QMAKE_LIBS_EGL = -lEGL -lIMGegl -lsrv_um -lusc
QMAKE_LIBS_OPENGL_ES2 = $$QMAKE_LIBS_EGL -lGLESv2 -lGLES_CM
QT_QPA_DEFAULT_PLATFORM = eglfs
load(qt_config)