b89d63515b
syncqt.pl adds an extra dependency on perl when building Qt. Modern C++
provides the convenient cross-platform way to access a filesystem and
to use regular expressions, so we may replace the perl script with C++
application. The syncqt executable is built at configure time and
installed as QtCore tool. It's running at configure time to deliver the
required header files for IDE to build a consistent code model and at
the build time to keep tracking changes in header files and generate
the missing aliases without reconfiguring. 'syncqt' only parses header
files from a CMake build tree, so the resulting Qt installation only
contains interfacing headers that belong to the platform that Qt is
built for. 'sync.profile' files are not used as the 'source of truth'
for sync qt procedure anymore, all the necessary information is taken
from either CMake files at configure time or from the module header
files while parsing them.
syncqt.pl is still in place since it's required as fallback solution
for a smooth transition to the new syncqt implementation for all qt
repositories.
This patchset only enables the C++ based syncqt for 'qtbase'
repository.
From the performance perspective C++ version works faster then perl
script, also the configure time is reduced significally on subsequent
reconfigurations - up x2 times faster when re-configuring repository,
but it also takes time to compile the tool itself the first time.
Numbers for qtbase:
syncqt.pl syncqt.cpp
initial: 0m16,035s 0m20,413s
reconfig: 0m6,819s 0m3,725s
The syncing procedure can be run separately for each module using
<ModuleName>_sync_headers targets. The 'sync_headers' target can be
used to sync all the modules at once.
Task-number: QTBUG-87480
Task-number: QTBUG-103196
Change-Id: I8c938bcaf88a8713b39bbfd66d9e7ef12b2c3523
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
416 lines
18 KiB
CMake
416 lines
18 KiB
CMake
# Copyright (C) 2022 The Qt Company Ltd.
|
|
# SPDX-License-Identifier: BSD-3-Clause
|
|
|
|
set(__GlobalConfig_path_suffix "${INSTALL_CMAKE_NAMESPACE}")
|
|
qt_path_join(__GlobalConfig_build_dir ${QT_CONFIG_BUILD_DIR} ${__GlobalConfig_path_suffix})
|
|
qt_path_join(__GlobalConfig_install_dir ${QT_CONFIG_INSTALL_DIR} ${__GlobalConfig_path_suffix})
|
|
set(__GlobalConfig_install_dir_absolute "${__GlobalConfig_install_dir}")
|
|
set(__qt_bin_dir_absolute "${QT_INSTALL_DIR}/${INSTALL_BINDIR}")
|
|
set(__qt_libexec_dir_absolute "${QT_INSTALL_DIR}/${INSTALL_LIBEXECDIR}")
|
|
if(QT_WILL_INSTALL)
|
|
# Need to prepend the install prefix when doing prefix builds, because the config install dir
|
|
# is relative then.
|
|
qt_path_join(__GlobalConfig_install_dir_absolute
|
|
${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX}
|
|
${__GlobalConfig_install_dir_absolute})
|
|
qt_path_join(__qt_bin_dir_absolute
|
|
${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX} ${__qt_bin_dir_absolute})
|
|
qt_path_join(__qt_libexec_dir_absolute
|
|
${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX} ${__qt_libexec_dir_absolute})
|
|
endif()
|
|
# Compute relative path from $qt_prefix/bin dir to global CMake config install dir, to use in the
|
|
# unix-y qt-cmake shell script, to make it work even if the installed Qt is relocated.
|
|
file(RELATIVE_PATH
|
|
__GlobalConfig_relative_path_from_bin_dir_to_cmake_config_dir
|
|
${__qt_bin_dir_absolute} ${__GlobalConfig_install_dir_absolute})
|
|
|
|
# Configure and install the QtBuildInternals package.
|
|
set(__build_internals_path_suffix "${INSTALL_CMAKE_NAMESPACE}BuildInternals")
|
|
qt_path_join(__build_internals_build_dir ${QT_CONFIG_BUILD_DIR} ${__build_internals_path_suffix})
|
|
qt_path_join(__build_internals_install_dir ${QT_CONFIG_INSTALL_DIR}
|
|
${__build_internals_path_suffix})
|
|
set(__build_internals_standalone_test_template_dir "QtStandaloneTestTemplateProject")
|
|
|
|
configure_file(
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/QtBuildInternals/QtBuildInternalsConfig.cmake"
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfig.cmake"
|
|
@ONLY
|
|
)
|
|
|
|
write_basic_package_version_file(
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfigVersionImpl.cmake"
|
|
VERSION ${PROJECT_VERSION}
|
|
COMPATIBILITY AnyNewerVersion
|
|
)
|
|
qt_internal_write_qt_package_version_file(
|
|
"${INSTALL_CMAKE_NAMESPACE}BuildInternals"
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfigVersion.cmake"
|
|
)
|
|
|
|
qt_install(FILES
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfig.cmake"
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfigVersion.cmake"
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfigVersionImpl.cmake"
|
|
"${__build_internals_build_dir}/QtBuildInternalsExtra.cmake"
|
|
DESTINATION "${__build_internals_install_dir}"
|
|
COMPONENT Devel
|
|
)
|
|
qt_copy_or_install(
|
|
DIRECTORY
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/QtBuildInternals/${__build_internals_standalone_test_template_dir}"
|
|
DESTINATION "${__build_internals_install_dir}")
|
|
|
|
set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/QtBuildInternals/${__build_internals_standalone_test_template_dir}/CMakeLists.txt")
|
|
|
|
include(QtToolchainHelpers)
|
|
qt_internal_create_toolchain_file()
|
|
|
|
include(QtWrapperScriptHelpers)
|
|
qt_internal_create_wrapper_scripts()
|
|
|
|
## Library to hold global features:
|
|
## These features are stored and accessed via Qt::GlobalConfig, but the
|
|
## files always lived in Qt::Core, so we keep it that way
|
|
add_library(GlobalConfig INTERFACE)
|
|
target_include_directories(GlobalConfig INTERFACE
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include>
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include/QtCore>
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}>
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}/QtCore>
|
|
)
|
|
qt_feature_module_begin(NO_MODULE
|
|
PUBLIC_FILE src/corelib/global/qconfig.h
|
|
PRIVATE_FILE src/corelib/global/qconfig_p.h
|
|
)
|
|
include("${CMAKE_CURRENT_SOURCE_DIR}/configure.cmake")
|
|
|
|
# Do what mkspecs/features/uikit/default_pre.prf does, aka enable sse2 for
|
|
# simulator_and_device_builds.
|
|
|
|
qt_internal_get_first_osx_arch(__qt_osx_first_arch)
|
|
set(__qt_apple_silicon_arches "arm64;arm64e")
|
|
if(MACOS AND QT_IS_MACOS_UNIVERSAL
|
|
AND __qt_osx_first_arch IN_LIST __qt_apple_silicon_arches)
|
|
# The test in configure.cmake will not be run, but we know that
|
|
# the compiler supports these intrinsics
|
|
set(QT_FORCE_FEATURE_x86intrin ON CACHE INTERNAL "Force-enable x86 intrinsics due to platform requirements.")
|
|
set(__QtFeature_custom_enabled_cache_variables
|
|
TEST_x86intrin
|
|
FEATURE_x86intrin
|
|
QT_FEATURE_x86intrin)
|
|
endif()
|
|
|
|
if(MACOS AND QT_IS_MACOS_UNIVERSAL AND __qt_osx_first_arch STREQUAL "x86_64")
|
|
set(QT_FORCE_FEATURE_neon ON CACHE INTERNAL "Force enable neon due to platform requirements.")
|
|
set(__QtFeature_custom_enabled_cache_variables
|
|
TEST_subarch_neon
|
|
FEATURE_neon
|
|
QT_FEATURE_neon)
|
|
endif()
|
|
|
|
qt_feature_module_end(GlobalConfig OUT_VAR_PREFIX "__GlobalConfig_")
|
|
|
|
# The version script support check has to happen after we determined which linker is going
|
|
# to be used. The linker decision happens in the qtbase/configure.cmake file that is processed
|
|
# above.
|
|
qt_run_linker_version_script_support()
|
|
|
|
qt_generate_global_config_pri_file()
|
|
qt_generate_global_module_pri_file()
|
|
qt_generate_global_device_pri_file()
|
|
qt_generate_qmake_and_qtpaths_wrapper_for_target()
|
|
|
|
add_library(Qt::GlobalConfig ALIAS GlobalConfig)
|
|
|
|
add_library(GlobalConfigPrivate INTERFACE)
|
|
target_link_libraries(GlobalConfigPrivate INTERFACE GlobalConfig)
|
|
target_include_directories(GlobalConfigPrivate INTERFACE
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include/QtCore/${PROJECT_VERSION}>
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include/QtCore/${PROJECT_VERSION}/QtCore>
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}/QtCore/${PROJECT_VERSION}>
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}/QtCore/${PROJECT_VERSION}/QtCore>
|
|
)
|
|
add_library(Qt::GlobalConfigPrivate ALIAS GlobalConfigPrivate)
|
|
|
|
include(QtPlatformTargetHelpers)
|
|
qt_internal_setup_public_platform_target()
|
|
|
|
# defines PlatformCommonInternal PlatformModuleInternal PlatformPluginInternal PlatformToolInternal
|
|
include(QtInternalTargets)
|
|
qt_internal_run_common_config_tests()
|
|
|
|
# Setup sanitizer options for qtbase directory scope based on features computed above.
|
|
qt_internal_set_up_sanitizer_options()
|
|
include("${CMAKE_CURRENT_LIST_DIR}/3rdparty/extra-cmake-modules/modules/ECMEnableSanitizers.cmake")
|
|
|
|
set(__export_targets Platform
|
|
GlobalConfig
|
|
GlobalConfigPrivate
|
|
PlatformCommonInternal
|
|
PlatformModuleInternal
|
|
PlatformPluginInternal
|
|
PlatformAppInternal
|
|
PlatformToolInternal)
|
|
set(__export_name "${INSTALL_CMAKE_NAMESPACE}Targets")
|
|
qt_install(TARGETS ${__export_targets} EXPORT "${__export_name}")
|
|
qt_install(EXPORT ${__export_name}
|
|
NAMESPACE ${QT_CMAKE_EXPORT_NAMESPACE}::
|
|
DESTINATION "${__GlobalConfig_install_dir}")
|
|
|
|
qt_internal_export_modern_cmake_config_targets_file(TARGETS ${__export_targets}
|
|
EXPORT_NAME_PREFIX ${INSTALL_CMAKE_NAMESPACE}
|
|
CONFIG_INSTALL_DIR
|
|
${__GlobalConfig_install_dir})
|
|
|
|
# Save minimum required CMake version to use Qt.
|
|
qt_internal_get_supported_min_cmake_version_for_using_qt(supported_min_version_for_using_qt)
|
|
qt_internal_get_computed_min_cmake_version_for_using_qt(computed_min_version_for_using_qt)
|
|
|
|
# Get the lower and upper policy range to embed into the Qt6 config file.
|
|
qt_internal_get_min_new_policy_cmake_version(min_new_policy_version)
|
|
qt_internal_get_max_new_policy_cmake_version(max_new_policy_version)
|
|
|
|
# Generate and install Qt6 config file. Make sure it happens after the global feature evaluation so
|
|
# they can be accessed in the Config file if needed.
|
|
configure_package_config_file(
|
|
"${PROJECT_SOURCE_DIR}/cmake/QtConfig.cmake.in"
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}Config.cmake"
|
|
INSTALL_DESTINATION "${__GlobalConfig_install_dir}"
|
|
)
|
|
|
|
configure_file(
|
|
"${PROJECT_SOURCE_DIR}/cmake/QtConfigExtras.cmake.in"
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigExtras.cmake"
|
|
@ONLY
|
|
)
|
|
|
|
write_basic_package_version_file(
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigVersionImpl.cmake"
|
|
VERSION ${PROJECT_VERSION}
|
|
COMPATIBILITY AnyNewerVersion
|
|
)
|
|
qt_internal_write_qt_package_version_file(
|
|
"${INSTALL_CMAKE_NAMESPACE}"
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigVersion.cmake"
|
|
)
|
|
|
|
qt_install(FILES
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}Config.cmake"
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigExtras.cmake"
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigVersion.cmake"
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigVersionImpl.cmake"
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
|
COMPONENT Devel
|
|
)
|
|
|
|
# Install internal CMake files.
|
|
# The functions defined inside can not be used in public projects.
|
|
# They can only be used while building Qt itself.
|
|
qt_copy_or_install(FILES
|
|
cmake/ModuleDescription.json.in
|
|
cmake/PkgConfigLibrary.pc.in
|
|
cmake/Qt3rdPartyLibraryConfig.cmake.in
|
|
cmake/Qt3rdPartyLibraryHelpers.cmake
|
|
cmake/QtAndroidHelpers.cmake
|
|
cmake/QtAppHelpers.cmake
|
|
cmake/QtAutogenHelpers.cmake
|
|
cmake/QtBuild.cmake
|
|
cmake/QtBuildInformation.cmake
|
|
cmake/QtCMakeHelpers.cmake
|
|
cmake/QtCMakeVersionHelpers.cmake
|
|
cmake/QtCMakePackageVersionFile.cmake.in
|
|
cmake/QtCompilerFlags.cmake
|
|
cmake/QtCompilerOptimization.cmake
|
|
cmake/QtConfigDependencies.cmake.in
|
|
cmake/QtConfigureTimeExecutableCMakeLists.txt.in
|
|
cmake/QtDeferredDependenciesHelpers.cmake
|
|
cmake/QtDbusHelpers.cmake
|
|
cmake/QtDocsHelpers.cmake
|
|
cmake/QtExecutableHelpers.cmake
|
|
cmake/QtFileConfigure.txt.in
|
|
cmake/QtFindPackageHelpers.cmake
|
|
cmake/QtFindWrapConfigExtra.cmake.in
|
|
cmake/QtFindWrapHelper.cmake
|
|
cmake/QtFinishPkgConfigFile.cmake
|
|
cmake/QtFinishPrlFile.cmake
|
|
cmake/QtFlagHandlingHelpers.cmake
|
|
cmake/QtFrameworkHelpers.cmake
|
|
cmake/QtGenerateExtPri.cmake
|
|
cmake/QtGenerateLibHelpers.cmake
|
|
cmake/QtGenerateLibPri.cmake
|
|
cmake/QtGenerateVersionScript.cmake
|
|
cmake/QtGlobalStateHelpers.cmake
|
|
cmake/QtHeadersClean.cmake
|
|
cmake/QtInstallHelpers.cmake
|
|
cmake/QtJavaHelpers.cmake
|
|
cmake/QtLalrHelpers.cmake
|
|
cmake/QtModuleConfig.cmake.in
|
|
cmake/QtModuleDependencies.cmake.in
|
|
cmake/QtModuleHeadersCheck.cmake
|
|
cmake/QtModuleHelpers.cmake
|
|
cmake/QtModuleToolsConfig.cmake.in
|
|
cmake/QtModuleToolsDependencies.cmake.in
|
|
cmake/QtModuleToolsVersionlessTargets.cmake.in
|
|
cmake/QtNoLinkTargetHelpers.cmake
|
|
cmake/QtPkgConfigHelpers.cmake
|
|
cmake/QtPlatformAndroid.cmake
|
|
cmake/QtPlatformSupport.cmake
|
|
cmake/QtPluginConfig.cmake.in
|
|
cmake/QtPluginDependencies.cmake.in
|
|
cmake/QtPluginHelpers.cmake
|
|
cmake/QtPlugins.cmake.in
|
|
cmake/QtPostProcess.cmake
|
|
cmake/QtPostProcessHelpers.cmake
|
|
cmake/QtPrecompiledHeadersHelpers.cmake
|
|
cmake/QtPriHelpers.cmake
|
|
cmake/QtPrlHelpers.cmake
|
|
cmake/QtPlatformTargetHelpers.cmake
|
|
cmake/QtProcessConfigureArgs.cmake
|
|
cmake/QtQmakeHelpers.cmake
|
|
cmake/QtResourceHelpers.cmake
|
|
cmake/QtRpathHelpers.cmake
|
|
cmake/QtSanitizerHelpers.cmake
|
|
cmake/QtScopeFinalizerHelpers.cmake
|
|
cmake/QtSeparateDebugInfo.Info.plist.in
|
|
cmake/QtSeparateDebugInfo.cmake
|
|
cmake/QtSetup.cmake
|
|
cmake/QtSimdHelpers.cmake
|
|
cmake/QtSingleRepoTargetSetBuildHelpers.cmake
|
|
cmake/QtStandaloneTestsConfig.cmake.in
|
|
cmake/QtSyncQtHelpers.cmake
|
|
cmake/QtTargetHelpers.cmake
|
|
cmake/QtTestHelpers.cmake
|
|
cmake/QtToolchainHelpers.cmake
|
|
cmake/QtToolHelpers.cmake
|
|
cmake/QtWasmHelpers.cmake
|
|
cmake/QtWrapperScriptHelpers.cmake
|
|
cmake/QtWriteArgsFile.cmake
|
|
cmake/modulecppexports.h.in
|
|
cmake/modulecppexports_p.h.in
|
|
cmake/qbatchedtestrunner.in.cpp
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
|
)
|
|
|
|
# Install our custom platform modules.
|
|
qt_copy_or_install(DIRECTORY cmake/platforms
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
|
)
|
|
|
|
# Install public config.tests files.
|
|
qt_copy_or_install(DIRECTORY
|
|
"config.tests/static_link_order"
|
|
"config.tests/binary_for_strip"
|
|
DESTINATION "${__GlobalConfig_install_dir}/config.tests"
|
|
)
|
|
|
|
# Install qt-internal-strip and qt-internal-ninja files.
|
|
set(__qt_internal_strip_wrappers
|
|
libexec/qt-internal-strip.in
|
|
libexec/qt-internal-strip.bat.in
|
|
libexec/qt-internal-ninja.in
|
|
libexec/qt-internal-ninja.bat.in
|
|
)
|
|
qt_copy_or_install(PROGRAMS
|
|
${__qt_internal_strip_wrappers}
|
|
DESTINATION "${__GlobalConfig_install_dir}/libexec"
|
|
)
|
|
if(QT_WILL_INSTALL)
|
|
foreach(__qt_internal_strip_wrapper ${__qt_internal_strip_wrappers})
|
|
file(COPY "${__qt_internal_strip_wrapper}"
|
|
DESTINATION "${__GlobalConfig_build_dir}/libexec")
|
|
endforeach()
|
|
endif()
|
|
|
|
# Install public CMake files.
|
|
# The functions defined inside can be used in both public projects and while building Qt.
|
|
# Usually we put such functions into Qt6CoreMacros.cmake, but that's getting bloated.
|
|
# These files will be included by Qt6Config.cmake.
|
|
set(__public_cmake_helpers
|
|
cmake/QtCopyFileIfDifferent.cmake
|
|
cmake/QtFeature.cmake
|
|
cmake/QtFeatureCommon.cmake
|
|
cmake/QtPublicAppleHelpers.cmake
|
|
cmake/QtPublicCMakeHelpers.cmake
|
|
cmake/QtPublicCMakeVersionHelpers.cmake
|
|
cmake/QtPublicFinalizerHelpers.cmake
|
|
cmake/QtPublicPluginHelpers.cmake
|
|
cmake/QtPublicTargetHelpers.cmake
|
|
cmake/QtPublicTestHelpers.cmake
|
|
cmake/QtPublicToolHelpers.cmake
|
|
cmake/QtPublicWalkLibsHelpers.cmake
|
|
cmake/QtPublicFindPackageHelpers.cmake
|
|
cmake/QtPublicDependencyHelpers.cmake
|
|
|
|
# Public CMake files that are installed next Qt6Config.cmake, but are NOT included by it.
|
|
# Instead they are included by the generated CMake toolchain file.
|
|
cmake/QtPublicWasmToolchainHelpers.cmake
|
|
)
|
|
|
|
qt_copy_or_install(FILES ${__public_cmake_helpers} DESTINATION "${__GlobalConfig_install_dir}")
|
|
|
|
# In prefix builds we also need to copy the files into the build config directory, so that the
|
|
# build-dir Qt6Config.cmake finds the files when building examples in-tree.
|
|
if(QT_WILL_INSTALL)
|
|
foreach(_public_cmake_helper ${__public_cmake_helpers})
|
|
file(COPY "${_public_cmake_helper}" DESTINATION "${__GlobalConfig_build_dir}")
|
|
endforeach()
|
|
endif()
|
|
|
|
# TODO: Check whether this is the right place to install these
|
|
qt_copy_or_install(DIRECTORY "cmake/3rdparty" DESTINATION "${__GlobalConfig_install_dir}")
|
|
|
|
# In prefix builds we also need to copy the files into the build config directory, so that the
|
|
# build-dir Qt6Config.cmake finds the files when building other repos in a top-level build.
|
|
if(QT_WILL_INSTALL)
|
|
file(COPY "cmake/3rdparty" DESTINATION "${__GlobalConfig_build_dir}")
|
|
endif()
|
|
|
|
# Install our custom Find modules, which will be used by the find_dependency() calls
|
|
# inside the generated ModuleDependencies cmake files.
|
|
qt_copy_or_install(DIRECTORY cmake/
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
|
FILES_MATCHING PATTERN "Find*.cmake"
|
|
PATTERN "tests" EXCLUDE
|
|
PATTERN "3rdparty" EXCLUDE
|
|
)
|
|
|
|
# In prefix builds we also need to copy the files into the build config directory, so that the
|
|
# build-dir Qt6Config.cmake finds the files when building examples as ExternalProjects.
|
|
if(QT_WILL_INSTALL)
|
|
file(COPY cmake/
|
|
DESTINATION "${__GlobalConfig_build_dir}"
|
|
FILES_MATCHING PATTERN "Find*.cmake"
|
|
PATTERN "tests" EXCLUDE
|
|
PATTERN "3rdparty" EXCLUDE
|
|
)
|
|
endif()
|
|
|
|
if(MACOS)
|
|
qt_copy_or_install(FILES
|
|
cmake/macos/MacOSXBundleInfo.plist.in
|
|
DESTINATION "${__GlobalConfig_install_dir}/macos"
|
|
)
|
|
elseif(IOS)
|
|
qt_copy_or_install(FILES
|
|
cmake/ios/Info.plist.app.in
|
|
cmake/ios/LaunchScreen.storyboard
|
|
DESTINATION "${__GlobalConfig_install_dir}/ios"
|
|
)
|
|
elseif(WASM)
|
|
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/util/wasm/wasmtestrunner/qt-wasmtestrunner.py"
|
|
"${QT_BUILD_DIR}/${INSTALL_LIBEXECDIR}/qt-wasmtestrunner.py" @ONLY)
|
|
|
|
qt_install(PROGRAMS "${QT_BUILD_DIR}/${INSTALL_LIBEXECDIR}/qt-wasmtestrunner.py"
|
|
DESTINATION "${INSTALL_LIBEXECDIR}")
|
|
endif()
|
|
|
|
# Install CI support files to libexec.
|
|
qt_path_join(__qt_libexec_install_dir "${QT_INSTALL_DIR}" "${INSTALL_LIBEXECDIR}")
|
|
qt_copy_or_install(FILES coin/instructions/qmake/ensure_pro_file.cmake
|
|
DESTINATION "${__qt_libexec_install_dir}")
|
|
qt_copy_or_install(PROGRAMS "util/testrunner/qt-testrunner.py"
|
|
DESTINATION "${__qt_libexec_install_dir}")
|
|
qt_copy_or_install(PROGRAMS "util/testrunner/sanitizer-testrunner.py"
|
|
DESTINATION "${__qt_libexec_install_dir}")
|