ffe0889413
To build examples as part of a non-installed Qt prefix build, not-yet-installed Config files need to be found by find_package() calls inside example projects. Facilitate that by propagating the CMAKE_PREFIX_PATH and QT_EXAMPLES_CMAKE_PREFIX_PATH paths in all relevant find_package() calls where NO_DEFAULT_PATH is used. Also adjust the inclusion of the QtFeature.cmake file to be relative to the qt6 directory, rather than the current list directory. This is needed to successfully find the file when parsing a Config file from a non-installed build directory. Change-Id: I36031279628f1f7741d8f4d7571484a6545227f7 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> |
||
---|---|---|
.. | ||
3rdparty | ||
QtBuildInternals | ||
tests | ||
3rdpartyConfig.cmake.in | ||
FindAtomic.cmake | ||
FindATSPI2.cmake | ||
FindCups.cmake | ||
FindDB2.cmake | ||
Finddouble-conversion.cmake | ||
FindGLESv2.cmake | ||
FindGTK3.cmake | ||
FindLibproxy.cmake | ||
FindLibsystemd.cmake | ||
FindLibudev.cmake | ||
FindMtdev.cmake | ||
FindMySQL.cmake | ||
FindOracle.cmake | ||
FindPPS.cmake | ||
FindSlog2.cmake | ||
FindTslib.cmake | ||
FindWrapDBus1.cmake | ||
FindWrapDoubleConversion.cmake | ||
FindWrapFreetype.cmake | ||
FindWrapPCRE2.cmake | ||
FindWrapRt.cmake | ||
FindXKB_COMMON_X11.cmake | ||
FindXRender.cmake | ||
FindZSTD.cmake | ||
qt.toolchain.cmake.in | ||
QtAutoDetect.cmake | ||
QtBaseCMakeTesting.cmake | ||
QtBaseConfigureTests.cmake | ||
QtBaseGlobalTargets.cmake | ||
QtBuild.cmake | ||
QtBuildInternalsExtra.cmake.in | ||
QtCompilerFlags.cmake | ||
QtCompilerOptimization.cmake | ||
QtConfig.cmake.in | ||
QtFeature.cmake | ||
QtInternalTargets.cmake | ||
QtModuleConfig.cmake.in | ||
QtModuleDependencies.cmake.in | ||
QtModuleToolsConfig.cmake.in | ||
QtModuleToolsDependencies.cmake.in | ||
QtPlatformAndroid.cmake | ||
QtPlatformSupport.cmake | ||
QtPluginConfig.cmake.in | ||
QtPluginDependencies.cmake.in | ||
QtPlugins.cmake.in | ||
QtPostProcess.cmake | ||
QtProperties.cmake | ||
QtResource.cmake.in | ||
QtSetup.cmake | ||
QtToolsConfig.cmake.in | ||
README.md |
Status
Initial port is on-going. Some modules of QtBase are ported, incl. some of the platform modules. Many libraries, tests and examples are still missing.
Basic functionality is there (moc, uic, etc.), but documentation, translations, etc. are missing.
NOTE: YOU NEED CMAKE 3.15 or later.
Intro
The CMake update offers an opportunity to revisit some topics that came up during the last few years.
-
The Qt build system does not support building host tools during a cross-compilation run. You need to build a Qt for your host machine first and then use the platform tools from that version. The decision to do this was reached independent of cmake: This does save resources on build machines as the host tools will only get built once.
-
3rd-party dependencies are no longer built as part of Qt. zlib, libpng, etc. from src/3rdparty need to be supplied from the outside to the build now. You may find apt-get/brew/etc. useful for this. Otherwise you may consider using vcpkg as in the next section. The decision to remove 3rd party dependencies from Qt repositories was reached independent of the decision to use cmake, we just use the opportunity to implement this decision.
-
There is less need for bootstrapping. Only moc and rcc (plus the lesser known tracegen and qfloat16-tables) are linking against the bootstrap Qt library. Everything else can link against the full QtCore. This will include qmake, which is currently missing from a cmake build. This will change: Qmake is supported as a build system for applications using Qt going forward and will not go away anytime soon.
-
For the time being we try to keep qmake working so that we do not interfere too much with ongoing development.
Building against VCPKG on Windows
You may use vcpkg to install dependencies needed to build QtBase.
git clone -b qt https://github.com/tronical/vcpkg
- Run
bootstrap-vcpkg.bat
orbootstrap-vcpkg.sh
- Set the
VCPKG_DEFAULT_TRIPLET
environment variable toqt-x64-windows-static
orqt-x86-windows-static
- Set the
VCPKG_ROOT
environment variable to the path where you cloned vcpkg - Build Qt dependencies:
vcpkg install @qt-packages-windows.txt
- When running cmake in qtbase, support for vcpkg will be picked up automatically when the VCPKG_ROOT/VCPKG_DEFAULT_TRIPLET environment variable is set.
Building against homebrew on macOS
You may use brew to install dependencies needed to build QtBase.
- Install homebrew:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
- Build Qt dependencies:
brew install pcre2 harfbuzz freetype
- Install cmake:
brew install cmake
- When running cmake in qtbase, pass
-DCMAKE_PREFIX_PATH=/usr/local
Building
The basic way of building with cmake is as follows:
cd {build directory}
cmake -DCMAKE_INSTALL_PREFIX=/path/where/to/install {path to source directory}
cmake --build .
cmake --install .
You need one build directory per Qt module. The build directory can be a sub-directory inside the
module qtbase/build
or an independent directory qtbase_build
. The installation prefix is
chosen when running cmake by passing -DCMAKE_INSTALL_PREFIX
. To build more than one Qt module,
make sure to pass the same install prefix.
cmake --build
and cmake --install
are simple wrappers around the basic build tool that CMake
generated a build system for. It works with any supported build backend supported by cmake, but you
can also use the backend build tool directly, e.g. by running make
.
CMake has a ninja backend that works quite well and is noticeably faster than make, so you may want to use that:
cd {build directory}
cmake -GNinja -DCMAKE_INSTALL_PREFIX=/path/where/to/install {path to source directory}
cmake --build .
cmake --install .
You can look into the generated build.ninja
file if you're curious and you can also build
targets directory such as ninja lib/libQt6Core.so
.
Make sure to remove CMakeCache.txt if you forgot to set the CMAKE_INSTALL_PREFIX on the first configuration, otherwise a second re-configuration will not pick up the new install prefix.
You can use cmake-gui {path to build directory}
or ccmake {path to build directory}
to
configure the values of individual cmake variables or Qt features. After changing a value, you need
to choose the configure step (usually several times:-/), followed by the generate step (to
generate makefiles/ninja files).
Developer Build
When working on Qt itself, it can be tedious to wait for the install step. In that case you want to use the developer build option, to get as many auto tests enabled and no longer be required to make install:
cd {build directory}
cmake -GNinja -DCMAKE_INSTALL_PREFIX=/path/to/qtbase_build -DFEATURE_developer_build=ON {path to source directory}
cmake --build .
# do NOT make install
Specifying configure.json features on the command line
QMake defines most features in configure.json files, like -developer-build or -no-opengl.
In CMake land, we currently generate configure.cmake files from the configure.json files. If the feature in configure.json has the name "dlopen", you can specify whether to enable or disable that feature in CMake with a -D flag on the CMake command line. So for example -DFEATURE_dlopen=ON or -DFEATURE_sql_mysql=OFF. At the moment, if you change a FEATURE flag's value, you have to remove the CMakeCache.txt file and reconfigure with CMake. And even then you might stumble on some issues when reusing an existing build, because of an automoc bug in upstream CMake.
Ninja reconfiguration bug
If you use the Ninja generator, there's a bug that after the first CMake configuration, if you run ninja, it will do the reconfiguration step again. This is quite annoying and time consuming.
There is an open pull request that fixes the issue at https://github.com/ninja-build/ninja/pull/1527. You can build your own Ninja executable until the request is merged.
cd {some directory}
git clone https://github.com/ninja-build/ninja.git
cd ninja && mkdir build && cd build
git remote add fix git@github.com:mathstuf/ninja.git && git fetch --all
git cherry-pick 29a565f18e01ce83ca14801f4684cd2acaf00d4c
../configure.py --bootstrap
cp ninja /usr/local/bin/ninja
Building with CCache
You can pass -DQT_USE_CCACHE=ON
to make the build system look for ccache
in your PATH
and prepend it to all C/C++/Objective-C compiler calls. At the moment this is only supported for the
Ninja and the Makefile generators.
Cross Compiling
Compiling for a target architecture that's different than the host requires one build of Qt for the host. This "host build" is needed because the process of building Qt involves the compilation of intermediate code generator tools, that in turn are called to produce source code that needs to be compiled into the final libraries. These tools are built using Qt itself and they need to run on the machine you're building on, regardless of the architecure you are targeting.
Build Qt regularly for your host system and install it into a directory of your choice using the
CMAKE_INSTALL_PREFIX
variable. You are free to disable the build of tests and examples by
passing -DBUILD_EXAMPLES=OFF
and -DBUILD_TESTING=OFF
.
With this installation of Qt in place, which contains all tools needed, we can proceed to create a new build of Qt that is cross-compiled to the target architecture of choice. You may proceed by setting up your environment. The CMake wiki has further information how to do that at
https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/CrossCompiling
Yocto based device SDKs come with an environment setup script that needs to be sourced in your shell and takes care of setting up environment variables and a cmake alias with a toolchain file, so that you can call cmake as you always do.
In order to make sure that Qt picks up the code generator tools from the host build, you need to pass an extra parameter to cmake:
-DQT_HOST_PATH=/path/to/your/host_build
The specified path needs to point to a directory that contains an installed host build of Qt.
Cross Compiling for Android
In order to cross-compile Qt to Android, you need a host build (see instructions above) and an Android build. In addition, it is necessary to install the Android NDK as well as vcpkg. Vcpkg is needed to supply third-party libraries that Qt requires but that are not part of the Android NDK.
Vcpkg for Android can be set up using the following steps:
git clone -b qt https://github.com/tronical/vcpkg
- Run
bootstrap-vcpkg.bat
orbootstrap-vcpkg.sh
- Set the
VCPKG_DEFAULT_TRIPLET
environment variable to one of the following values:arm-android
(armeabi-v7a)arm64-android
(arm64v8)x86-android
(x86)x64-android
(x86_64)
- Set the
VCPKG_ROOT
environment variable to the path where you cloned vcpkg - Set the
ANDROID_NDK_HOME
environment variable to the path where you have installed the Android NDK. - Set the
ANDROID_SDK_HOME
environment variable to the path where you have installed the Android SDK. - Build Qt dependencies:
vcpkg install @qt-packages-android.txt
When running cmake in qtbase, pass
-DCMAKE_TOOLCHAIN_FILE=$ANDROID_NDK_HOME/build/cmake/android.toolchain.cmake -DQT_HOST_PATH=/path/to/your/host/build -DANDROID_SDK_ROOT=$ANDROID_SDK_HOME -DCMAKE_INSTALL_PREFIX=$INSTALL_PATH
If you don't supply the configuration argument -DANDROID_ABI=...
, it will default to
armeabi-v7a
. To target other architectures, use on of the following values:
- arm64:
-DANDROID_ABI=arm64-v8
- x86:
-DANDROID_ABI=x86
- x86_64:
-DANDROID_ABI=x86_64
By default we set the android API level to 21. Should you need to change this supply the following
configuration argument to the above CMake call: -DANDROID_NATIVE_API_LEVEL=${API_LEVEL}
Debugging CMake files
CMake allows specifying the --trace
and --trace-expand
options, which work like
qmake -d -d
: As the cmake code is evaluated, the values of parameters and variables is shown.
This can be a lot of output, so you may want to redirect it to a file.
Porting Help
We have some python scripts to help with the conversion from qmake to cmake. These scripts can be
found in utils/cmake
.
configurejson2cmake.py
This script converts all configure.json
in the Qt repository to configure.cmake
files for
use with CMake. We want to generate configure.cmake files for the foreseeable future, so if you need
to tweak the generated configure.cmake files, please tweak the generation script instead.
configurejson2cmake.py
is run like this: util/cmake/configurejson2cmake.py .
in the
top-level source directory of a Qt repository.
pro2cmake.py
pro2cmake.py
generates a skeleton CMakeLists.txt file from a .pro-file. You will need to polish
the resulting CMakeLists.txt file, but e.g. the list of files, etc. should be extracted for you.
pro2cmake.py
is run like this: /path/to/pro2cmake.py some.pro
.
run_pro2cmake.py
`` A small helper script to run pro2cmake.py on all .pro-files in a directory. Very useful to e.g. convert all the unit tests for a Qt module over to cmake;-)
run_pro2cmake.py
is run like this: /path/to/run_pro2cmake.py some_dir
.
How to convert certain constructs
qmake | CMake |
---|---|
qtHaveModule(foo) |
if(TARGET Qt::foo) |
qtConfig(foo) |
if (QT_FEATURE_foo) |