AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f2c5d38c32
qt5base-lts/configure
Girish Ramakrishnan 4ba9cecec2 Remove sysroot detection 
configure parses the compiler from the mkspecs using an awk script.
The detected compiler is then used to determine sysroot support.
The awk script is currently unable to handle loading of qmake
features and thus configure will not detect the compiler correctly.

This is the case when using device profiles. The qdevice.pri is loaded
through the qmake feature file device_config.prf.

One possible way to fix this is to move this detection after qmake is
built and make this a .pro based config.test. However, this cannot be done
because the sysroot is actually baked into the qmake binary as the
QT_SYSROOT variable.

The solution is to remove this check completely and let the build fail
when Qt starts compiling with --sysroot.

Change-Id: I6c3b7ec2c8e5e390d6f5b1e602d656682d610b98
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-28 19:34:42 +02:00

6424 lines
213 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
#############################################################################
##
## Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies).
## Contact: http://www.qt-project.org/
##
## This file is the build configuration utility of the Qt Toolkit.
##
## $QT_BEGIN_LICENSE:LGPL$
## GNU Lesser General Public License Usage
## This file may be used under the terms of the GNU Lesser General Public
## License version 2.1 as published by the Free Software Foundation and
## appearing in the file LICENSE.LGPL included in the packaging of this
## file. Please review the following information to ensure the GNU Lesser
## General Public License version 2.1 requirements will be met:
## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
##
## In addition, as a special exception, Nokia gives you certain additional
## rights. These rights are described in the Nokia Qt LGPL Exception
## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
##
## GNU General Public License Usage
## Alternatively, this file may be used under the terms of the GNU General
## Public License version 3.0 as published by the Free Software Foundation
## and appearing in the file LICENSE.GPL included in the packaging of this
## file. Please review the following information to ensure the GNU General
## Public License version 3.0 requirements will be met:
## http://www.gnu.org/copyleft/gpl.html.
##
## Other Usage
## Alternatively, this file may be used in accordance with the terms and
## conditions contained in a signed written agreement between you and Nokia.
##
##
##
##
##
##
## $QT_END_LICENSE$
##
#############################################################################
#-------------------------------------------------------------------------------
# script initialization
#-------------------------------------------------------------------------------
# the name of this script
relconf=`basename $0`
# the directory of this script is the "source tree"
relpath=`dirname $0`
relpath=`(cd "$relpath"; /bin/pwd)`
# the current directory is the "build tree" or "object tree"
outpath=`/bin/pwd`
#license file location
LICENSE_FILE="$QT_LICENSE_FILE"
[ -z "$LICENSE_FILE" ] && LICENSE_FILE="$HOME/.qt-license"
if [ -f "$LICENSE_FILE" ]; then
tr -d '\r' <"$LICENSE_FILE" >"${LICENSE_FILE}.tmp"
diff "${LICENSE_FILE}.tmp" "${LICENSE_FILE}" >/dev/null 2>&1 || LICENSE_FILE="${LICENSE_FILE}.tmp"
fi
# later cache the command line in config.status
OPT_CMDLINE=`echo $@ | sed "s,-v ,,g; s,-v$,,g"`
# initialize global variables
QMAKE_SWITCHES=
QMAKE_VARS=
QMAKE_CONFIG=
QTCONFIG_CONFIG=
QT_CONFIG=
SUPPORTED=
QMAKE_VARS_FILE=.qmake.vars
DEVICE_VARS_FILE=.device.vars
:> "$QMAKE_VARS_FILE"
:> "$DEVICE_VARS_FILE"
#-------------------------------------------------------------------------------
# utility functions
#-------------------------------------------------------------------------------
shellEscape()
{
echo "$@" | sed 's/ /\ /g'
}
# Adds a new qmake variable to the cache
# Usage: QMakeVar mode varname contents
# where mode is one of: set, add, del
QMakeVar()
{
case "$1" in
set)
eq="="
;;
add)
eq="+="
;;
del)
eq="-="
;;
*)
echo >&2 "BUG: wrong command to QMakeVar: $1"
;;
esac
echo "$2" "$eq" "$3" >> "$QMAKE_VARS_FILE"
}
# Helper function for getQMakeConf. It parses include statements in
# qmake.conf and prints out the expanded file
getQMakeConf1()
{
while read line; do case "$line" in
include*)
inc_file=`echo "$line" | sed -n -e "/^include.*(.*)/s/include.*(\(.*\)).*$/\1/p"`
current_dir=`dirname "$1"`
conf_file="$current_dir/$inc_file"
if [ ! -f "$conf_file" ]; then
echo "WARNING: Unable to find file $conf_file" >&2
continue
fi
getQMakeConf1 "$conf_file"
;;
*)
echo "$line"
;;
esac; done < "$1"
}
getQMakeConf2()
{
$AWK '
BEGIN {
values["LITERAL_WHITESPACE"] = " "
values["LITERAL_DOLLAR"] = "$"
}
/^[_A-Z0-9.]+[ \t]*\+?=/ {
valStart = index($0, "=") + 1
append = 0
if (substr($0, valStart - 2, 1) == "+") {
append = 1
}
variable = substr($0, 0, valStart - 2 - append)
value = substr($0, valStart)
gsub("[ \t]+", "", variable)
gsub("^[ \t]+", "", value)
gsub("[ \t]+$", "", value)
ovalue = ""
while (match(value, /\$\$(\{[_A-Z0-9.]+\}|[_A-Z0-9.]+)/)) {
ovalue = ovalue substr(value, 1, RSTART - 1)
var = substr(value, RSTART + 2, RLENGTH - 2)
value = substr(value, RSTART + RLENGTH)
if (var ~ /^{/) {
var = substr(var, 2, length(var) - 2)
}
ovalue = ovalue values[var]
}
ovalue = ovalue value
combinedValue = values[variable]
if (append == 1 && length(combinedValue) > 0) {
combinedValue = combinedValue " " ovalue
} else {
combinedValue = ovalue
}
values[variable] = combinedValue
}
END {
for (var in values) {
print var "=" values[var]
}
}
'
}
getQMakeConf3()
{
echo "$2" | $AWK "/^($1)=/ { print substr(\$0, index(\$0, \"=\") + 1) }"
}
# relies on $QMAKESPEC being set correctly. parses include statements in
# qmake.conf and prints out the expanded file
getQMakeConf()
{
if [ -z "$specvals" ]; then
specvals=`getQMakeConf1 "$QMAKESPEC/qmake.conf" | getQMakeConf2`
fi
getQMakeConf3 "$1" "$specvals"
}
getXQMakeConf()
{
if [ -z "$xspecvals" ]; then
xspecvals=`getQMakeConf1 "$XQMAKESPEC/qmake.conf" | getQMakeConf2`
fi
getQMakeConf3 "$1" "$xspecvals"
}
# relies on $TEST_COMPILER being set correctly
compilerSupportsFlag()
{
cat >conftest.cpp <<EOF
int main() { return 0; }
EOF
"$TEST_COMPILER" "$@" -o conftest.o conftest.cpp
ret=$?
rm -f conftest.cpp conftest.o
return $ret
}
# relies on $TEST_COMPILER being set correctly
linkerSupportsFlag()
{
lflags=-Wl
for flag
do
safe_flag=`shellEscape "$flag"`
lflags=$lflags,$safe_flag
done
compilerSupportsFlag "$lflags" >/dev/null 2>&1
}
#-------------------------------------------------------------------------------
# device options
#-------------------------------------------------------------------------------
DeviceVar()
{
case "$1" in
set)
eq="="
;;
*)
echo >&2 "BUG: wrong command to QMakeVar: $1"
;;
esac
echo "$2" "$eq" "$3" >> "$DEVICE_VARS_FILE"
}
#-------------------------------------------------------------------------------
# operating system detection
#-------------------------------------------------------------------------------
# need that throughout the script
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
# detect the "echo without newline" style. usage: echo $ECHO_N "<string>$ECHO_C"
if echo '\c' | grep '\c' >/dev/null; then
ECHO_N=-n
else
ECHO_C='\c'
fi
#-------------------------------------------------------------------------------
# window system detection
#-------------------------------------------------------------------------------
BUILD_ON_MAC=no
PLATFORM_MAC=no
if [ -d /System/Library/Frameworks/Carbon.framework ]; then
BUILD_ON_MAC=yes
PLATFORM_MAC=maybe
fi
#-----------------------------------------------------------------------------
# Qt version detection
#-----------------------------------------------------------------------------
QT_VERSION=`grep '^# *define *QT_VERSION_STR' "$relpath"/src/corelib/global/qglobal.h`
QT_MAJOR_VERSION=
QT_MINOR_VERSION=0
QT_PATCH_VERSION=0
if [ -n "$QT_VERSION" ]; then
QT_VERSION=`echo $QT_VERSION | sed 's,^# *define *QT_VERSION_STR *"*\([^ ]*\)"$,\1,'`
MAJOR=`echo $QT_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\1,'`
if [ -n "$MAJOR" ]; then
MINOR=`echo $QT_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\2,'`
PATCH=`echo $QT_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\3,'`
QT_MAJOR_VERSION="$MAJOR"
[ -z "$MINOR" ] || QT_MINOR_VERSION="$MINOR"
[ -z "$PATCH" ] || QT_PATCH_VERSION="$PATCH"
fi
fi
if [ -z "$QT_MAJOR_VERSION" ]; then
echo "Cannot process version from qglobal.h: $QT_VERSION"
echo "Cannot proceed."
exit 1
fi
QT_PACKAGEDATE=`grep '^# *define *QT_PACKAGEDATE_STR' "$relpath"/src/corelib/global/qglobal.h | sed -e 's,^# *define *QT_PACKAGEDATE_STR *"\([^ ]*\)"$,\1,' -e s,-,,g`
if [ -z "$QT_PACKAGEDATE" ]; then
echo "Unable to determine package date from qglobal.h: '$QT_PACKAGEDATE'"
echo "Cannot proceed"
exit 1
fi
#-------------------------------------------------------------------------------
# check the license
#-------------------------------------------------------------------------------
COMMERCIAL_USER=ask
CFG_DEV=no
CFG_RTOS_ENABLED=yes
EditionString=Commercial
earlyArgParse()
{
# parse the arguments, setting things to "yes" or "no"
while [ "$#" -gt 0 ]; do
CURRENT_OPT="$1"
UNKNOWN_ARG=no
case "$1" in
#Autoconf style options
--enable-*)
VAR=`echo $1 | sed "s,^--enable-\(.*\),\1,"`
VAL=yes
;;
--disable-*)
VAR=`echo $1 | sed "s,^--disable-\(.*\),\1,"`
VAL=no
;;
--*=*)
VAR=`echo $1 | sed "s,^--\(.*\)=.*,\1,"`
VAL=`echo $1 | sed "s,^--.*=\(.*\),\1,"`
;;
--no-*)
VAR=`echo $1 | sed "s,^--no-\(.*\),\1,"`
VAL=no
;;
-h|help|--help|-help)
if [ "$VAL" = "yes" ]; then
OPT_HELP="$VAL"
COMMERCIAL_USER="no" #doesn't matter we will display the help
else
UNKNOWN_OPT=yes
COMMERCIAL_USER="no" #doesn't matter we will display the help
fi
;;
--*)
VAR=`echo $1 | sed "s,^--\(.*\),\1,"`
VAL=yes
;;
-*)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
VAL="unknown"
;;
*)
UNKNOWN_ARG=yes
;;
esac
if [ "$UNKNOWN_ARG" = "yes" ]; then
shift
continue
fi
shift
UNKNOWN_OPT=no
case "$VAR" in
developer-build)
CFG_DEV="yes"
;;
commercial)
COMMERCIAL_USER="yes"
;;
opensource)
COMMERCIAL_USER="no"
;;
*)
UNKNOWN_OPT=yes
;;
esac
done
}
earlyArgParse "$@"
if [ "$COMMERCIAL_USER" = "ask" ]; then
while true; do
echo "Which edition of Qt do you want to use ?"
echo
echo "Type 'c' if you want to use the Commercial Edition."
echo "Type 'o' if you want to use the Open Source Edition."
echo
read commercial
echo
if [ "$commercial" = "c" ]; then
COMMERCIAL_USER="yes"
break
elif [ "$commercial" = "o" ]; then
COMMERCIAL_USER="no"
break
fi
done
fi
if [ -f "$relpath"/LICENSE.PREVIEW.COMMERCIAL ] && [ $COMMERCIAL_USER = "yes" ]; then
# Commercial preview release
[ "$PLATFORM_MAC" = "maybe" ] && PLATFORM_MAC=yes
Licensee="Preview"
Edition="Preview"
QT_EDITION="QT_EDITION_DESKTOP"
LicenseType="Technology Preview"
elif [ $COMMERCIAL_USER = "yes" ]; then
# one of commercial editions
[ "$PLATFORM_MAC" = "maybe" ] && PLATFORM_MAC=yes
# read in the license file
if [ -f "$LICENSE_FILE" ]; then
. "$LICENSE_FILE" >/dev/null 2>&1
if [ -z "$LicenseKeyExt" ]; then
echo
echo "You are using an old license file."
echo
echo "Please install the license file supplied by Nokia,"
echo "or install the Qt Open Source Edition if you intend to"
echo "develop free software."
exit 1
fi
if [ -z "$Licensee" ]; then
echo
echo "Invalid license key. Please check the license key."
exit 1
fi
else
if [ -z "$LicenseKeyExt" ]; then
echo
echo $ECHO_N "Please enter your license key: $ECHO_C"
read LicenseKeyExt
Licensee="Unknown user"
fi
fi
# Key verification
echo "$LicenseKeyExt" | grep ".....*-....*-....*-....*-.....*-.....*-...." >/dev/null 2>&1 \
&& LicenseValid="yes" \
|| LicenseValid="no"
if [ "$LicenseValid" != "yes" ]; then
echo
echo "Invalid license key. Please check the license key."
exit 1
fi
ProductCode=`echo $LicenseKeyExt | cut -f 1 -d - | cut -b 1`
PlatformCode=`echo $LicenseKeyExt | cut -f 2 -d -`
LicenseTypeCode=`echo $LicenseKeyExt | cut -f 3 -d -`
LicenseFeatureCode=`echo $LicenseKeyExt | cut -f 4 -d - | cut -b 1`
# determine which edition we are licensed to use
case "$LicenseTypeCode" in
F4M)
LicenseType="Commercial"
case $ProductCode in
F)
Edition="Universal"
QT_EDITION="QT_EDITION_UNIVERSAL"
;;
B)
Edition="FullFramework"
EditionString="Full Framework"
QT_EDITION="QT_EDITION_DESKTOP"
;;
L)
Edition="GUIFramework"
EditionString="GUI Framework"
QT_EDITION="QT_EDITION_DESKTOPLIGHT"
;;
esac
;;
Z4M|R4M|Q4M)
LicenseType="Evaluation"
QMakeVar add DEFINES QT_EVAL
case $ProductCode in
B)
Edition="Evaluation"
QT_EDITION="QT_EDITION_EVALUATION"
;;
esac
;;
esac
if [ -z "$LicenseType" -o -z "$Edition" -o -z "$QT_EDITION" ]; then
echo
echo "Invalid license key. Please check the license key."
exit 1
fi
# verify that we are licensed to use Qt on this platform
LICENSE_EXTENSION=
case "$PlatformCode" in
*L)
CFG_RTOS_ENABLED=yes
PlatformCode=`echo "$PlatformCode" | sed 'h;y/8NPQRTZ/UCWX9M7/;x;G;s/\(.\)....\(.\)./\1\2/'`
;;
*)
CFG_RTOS_ENABLED=no
PlatformCode=`echo "$PlatformCode" | sed 's/.$//'`
;;
esac
### EMBEDDED_QPA logic missing ###
case "$PlatformCode,$PLATFORM_MAC" in
X9,* | XC,* | XU,* | XW,* | XM,*)
# Qt All-OS
LICENSE_EXTENSION="-ALLOS"
;;
8M,* | KM,* | S9,* | SC,* | SM,* | SU,* | SW,* | X9,* | XC,* | XU,* | XW,*)
# Qt for Embedded Linux
LICENSE_EXTENSION="-EMBEDDED"
;;
6M,* | N7,* | N9,* | NX,*)
# Embedded no-deploy
LICENSE_EXTENSION="-EMBEDDED"
;;
FM,* | LM,yes | ZM,no)
# Desktop
LICENSE_EXTENSION="-DESKTOP"
;;
*)
Platform=Linux/X11
[ "$PLATFORM_MAC" = "yes" ] && Platform='Mac OS X'
echo
echo "You are not licensed for the $Platform platform."
echo
echo "Please contact qt-info@nokia.com to upgrade your license to"
echo "include the $Platform platform, or install the Qt Open Source Edition"
echo "if you intend to develop free software."
exit 1
;;
esac
if test -r "$relpath/.LICENSE"; then
# Generic, non-final license
LICENSE_EXTENSION=""
line=`sed 'y/a-z/A-Z/;q' "$relpath"/.LICENSE`
case "$line" in
*BETA*)
Edition=Beta
;;
*TECHNOLOGY?PREVIEW*)
Edition=Preview
;;
*EVALUATION*)
Edition=Evaluation
;;
*)
echo >&2 "Invalid license files; cannot continue"
exit 1
;;
esac
Licensee="$Edition"
EditionString="$Edition"
QT_EDITION="QT_EDITION_DESKTOP"
fi
case "$LicenseFeatureCode" in
B|G|L|Y)
# US
case "$LicenseType" in
Commercial)
cp -f "$relpath/.LICENSE${LICENSE_EXTENSION}-US" "$outpath/LICENSE"
;;
Evaluation)
cp -f "$relpath/.LICENSE-EVALUATION-US" "$outpath/LICENSE"
;;
esac
;;
2|4|5|F)
# non-US
case "$LicenseType" in
Commercial)
cp -f "$relpath/.LICENSE${LICENSE_EXTENSION}" "$outpath/LICENSE"
;;
Evaluation)
cp -f "$relpath/.LICENSE-EVALUATION" "$outpath/LICENSE"
;;
esac
;;
*)
echo
echo "Invalid license key. Please check the license key."
exit 1
;;
esac
case "$LicenseFeatureCode" in
4|B|F|Y)
CFG_RTOS_ENABLED=yes
;;
2|5|G|L)
CFG_RTOS_ENABLED=no
;;
esac
if [ '!' -f "$outpath/LICENSE" ]; then
echo "The LICENSE, LICENSE.GPL3 LICENSE.LGPL file shipped with"
echo "this software has disappeared."
echo
echo "Sorry, you are not licensed to use this software."
echo "Try re-installing."
echo
exit 1
fi
elif [ $COMMERCIAL_USER = "no" ]; then
# Open Source edition - may only be used under the terms of the GPL or LGPL.
[ "$PLATFORM_MAC" = "maybe" ] && PLATFORM_MAC=yes
Licensee="Open Source"
Edition="OpenSource"
EditionString="Open Source"
QT_EDITION="QT_EDITION_OPENSOURCE"
fi
#-------------------------------------------------------------------------------
# initalize variables
#-------------------------------------------------------------------------------
SYSTEM_VARIABLES="RANLIB STRIP OBJDUMP LD CC CXX CFLAGS CXXFLAGS LDFLAGS"
for varname in $SYSTEM_VARIABLES; do
qmakevarname="${varname}"
# use LDFLAGS for autoconf compat, but qmake uses QMAKE_LFLAGS
if [ "${varname}" = "LDFLAGS" ]; then
qmakevarname="LFLAGS"
elif [ "${varname}" = "LD" ]; then
qmakevarname="LINK"
fi
cmd=`echo \
'if [ -n "\$'${varname}'" ]; then
QMakeVar set QMAKE_'${qmakevarname}' "\$'${varname}'"
fi'`
eval "$cmd"
done
# Use CC/CXX to run config.tests
mkdir -p "$outpath/config.tests"
rm -f "$outpath/config.tests/.qmake.cache"
cp "$QMAKE_VARS_FILE" "$outpath/config.tests/.qmake.cache"
QMakeVar add styles "cde mac motif plastique cleanlooks windows"
# QTDIR may be set and point to an old or system-wide Qt installation
unset QTDIR
# the minimum version of libdbus-1 that we require:
MIN_DBUS_1_VERSION=0.93
# initalize internal variables
CFG_CONFIGURE_EXIT_ON_ERROR=yes
CFG_PROFILE=no
CFG_EXCEPTIONS=unspecified
CFG_GUI=auto # (yes|no|auto)
CFG_WIDGETS=yes
CFG_QCONFIG=full
CFG_DEBUG=auto
CFG_MYSQL_CONFIG=
CFG_DEBUG_RELEASE=no
CFG_SHARED=yes
CFG_SM=auto
CFG_XSHAPE=auto
CFG_XSYNC=auto
CFG_XVIDEO=auto
CFG_XINERAMA=runtime
CFG_XFIXES=runtime
CFG_ZLIB=auto
CFG_SQLITE=qt
CFG_GIF=auto
CFG_PNG=yes
CFG_LIBPNG=auto
CFG_JPEG=auto
CFG_LIBJPEG=auto
CFG_XCURSOR=runtime
CFG_XRANDR=runtime
CFG_XRENDER=auto
CFG_MITSHM=auto
CFG_OPENGL=auto
CFG_OPENVG=auto
CFG_OPENVG_LC_INCLUDES=no
CFG_OPENVG_SHIVA=auto
CFG_OPENVG_ON_OPENGL=auto
CFG_EGL=auto
CFG_SSE=auto
CFG_FONTCONFIG=auto
CFG_LIBFREETYPE=auto
CFG_SQL_AVAILABLE=
QT_DEFAULT_BUILD_PARTS="libs examples"
CFG_BUILD_PARTS=""
CFG_NOBUILD_PARTS=""
CFG_RELEASE_QMAKE=no
CFG_AUDIO_BACKEND=auto
CFG_V8SNAPSHOT=auto
CFG_DECLARATIVE_DEBUG=yes
CFG_JAVASCRIPTCORE_JIT=auto
# Target architecture
CFG_ARCH=
# Host architecture, same as CFG_ARCH when not cross-compiling
CFG_HOST_ARCH=
# Set when the -arch or -host-arch arguments are used
OPT_OBSOLETE_HOST_ARG=no
CFG_USE_GNUMAKE=no
CFG_IM=yes
CFG_XINPUT2=auto
CFG_XINPUT=runtime
CFG_XKB=auto
CFG_XCB=auto
CFG_XCB_LIMITED=yes
CFG_EGLFS=auto
CFG_LIBUDEV=auto
CFG_OBSOLETE_WAYLAND=no
CFG_EVDEV=auto
CFG_NIS=auto
CFG_CUPS=auto
CFG_ICONV=auto
CFG_DBUS=auto
CFG_GLIB=auto
CFG_GSTREAMER=auto
CFG_QGTKSTYLE=auto
CFG_LARGEFILE=auto
CFG_OPENSSL=auto
CFG_STL=auto
CFG_PRECOMPILE=auto
CFG_SEPARATE_DEBUG_INFO=no
CFG_SEPARATE_DEBUG_INFO_NOCOPY=no
CFG_REDUCE_EXPORTS=auto
CFG_MMX=auto
CFG_3DNOW=auto
CFG_SSE=auto
CFG_SSE2=auto
CFG_SSE3=auto
CFG_SSSE3=auto
CFG_SSE4_1=auto
CFG_SSE4_2=auto
CFG_AVX=auto
CFG_REDUCE_RELOCATIONS=auto
CFG_ACCESSIBILITY=auto
CFG_IWMMXT=no
CFG_NEON=auto
CFG_MIPS_DSP=yes
CFG_MIPS_DSPR2=yes
CFG_CLOCK_GETTIME=auto
CFG_CLOCK_MONOTONIC=auto
CFG_MREMAP=auto
CFG_GETADDRINFO=auto
CFG_IPV6IFNAME=auto
CFG_GETIFADDRS=auto
CFG_INOTIFY=auto
CFG_RPATH=yes
CFG_FRAMEWORK=auto
MAC_CONFIG_TEST_COMMANDLINE= # used to make the configure tests run with the correct arch's and SDK settings
CFG_MAC_DWARF2=auto
CFG_MAC_HARFBUZZ=no
CFG_SXE=no
CFG_PREFIX_INSTALL=yes
CFG_SDK=
D_FLAGS=
I_FLAGS=
L_FLAGS=
RPATH_FLAGS=
l_FLAGS=
W_FLAGS=
QCONFIG_FLAGS=
XPLATFORM= # This seems to be the QMAKESPEC, like "linux-g++"
XPLATFORM_MINGW=no # Whether target platform is MinGW (win32-g++*)
XPLATFORM_MAEMO=no
PLATFORM=$QMAKESPEC
QT_CROSS_COMPILE=no
OPT_CONFIRM_LICENSE=no
OPT_SHADOW=maybe
OPT_FAST=auto
OPT_VERBOSE=no
OPT_HELP=
CFG_SILENT=no
CFG_ALSA=auto
CFG_PULSEAUDIO=auto
CFG_COREWLAN=auto
CFG_NOPROCESS=no
CFG_ICU=auto
CFG_FORCE_ASSERTS=no
CFG_PCRE=auto
QPA_PLATFORM_GUARD=yes
# initalize variables used for installation
QT_INSTALL_PREFIX=
QT_INSTALL_DOCS=
QT_INSTALL_HEADERS=
QT_INSTALL_LIBS=
QT_INSTALL_BINS=
QT_INSTALL_PLUGINS=
QT_INSTALL_IMPORTS=
QT_INSTALL_DATA=
QT_INSTALL_TRANSLATIONS=
QT_INSTALL_SETTINGS=
QT_INSTALL_EXAMPLES=
QT_INSTALL_TESTS=
CFG_SYSROOT=
QT_HOST_PREFIX=
QT_HOST_BINS=
QT_HOST_DATA=
#flags for SQL drivers
QT_CFLAGS_PSQL=
QT_LFLAGS_PSQL=
QT_CFLAGS_MYSQL=
QT_LFLAGS_MYSQL=
QT_LFLAGS_MYSQL_R=
QT_CFLAGS_SQLITE=
QT_LFLAGS_SQLITE=
QT_LFLAGS_ODBC="-lodbc"
QT_LFLAGS_TDS=
# flags for libdbus-1
QT_CFLAGS_DBUS=
QT_LIBS_DBUS=
# flags for Glib (X11 only)
QT_CFLAGS_GLIB=
QT_LIBS_GLIB=
# flags for GStreamer (X11 only)
QT_CFLAGS_GSTREAMER=
QT_LIBS_GSTREAMER=
#-------------------------------------------------------------------------------
# check SQL drivers available in this package
#-------------------------------------------------------------------------------
# opensource version removes some drivers, so force them to be off
CFG_SQL_tds=no
CFG_SQL_oci=no
CFG_SQL_db2=no
CFG_SQL_AVAILABLE=
if [ -d "$relpath/src/plugins/sqldrivers" ]; then
for a in "$relpath/src/plugins/sqldrivers/"*; do
if [ -d "$a" ]; then
base_a=`basename "$a"`
CFG_SQL_AVAILABLE="${CFG_SQL_AVAILABLE} ${base_a}"
eval "CFG_SQL_${base_a}=auto"
fi
done
fi
CFG_IMAGEFORMAT_PLUGIN_AVAILABLE=
if [ -d "$relpath/src/plugins/imageformats" ]; then
for a in "$relpath/src/plugins/imageformats/"*; do
if [ -d "$a" ]; then
base_a=`basename "$a"`
CFG_IMAGEFORMAT_PLUGIN_AVAILABLE="${CFG_IMAGEFORMAT_PLUGIN_AVAILABLE} ${base_a}"
fi
done
fi
#-------------------------------------------------------------------------------
# parse command line arguments
#-------------------------------------------------------------------------------
# parse the arguments, setting things to "yes" or "no"
while [ "$#" -gt 0 ]; do
CURRENT_OPT="$1"
UNKNOWN_ARG=no
case "$1" in
#Autoconf style options
--enable-*)
VAR=`echo $1 | sed "s,^--enable-\(.*\),\1,"`
VAL=yes
;;
--disable-*)
VAR=`echo $1 | sed "s,^--disable-\(.*\),\1,"`
VAL=no
;;
--*=*)
VAR=`echo $1 | sed "s,^--\(.*\)=.*,\1,"`
VAL=`echo $1 | sed "s,^--.*=\(.*\),\1,"`
;;
--no-*)
VAR=`echo $1 | sed "s,^--no-\(.*\),\1,"`
VAL=no
;;
--*)
VAR=`echo $1 | sed "s,^--\(.*\),\1,"`
VAL=yes
;;
#Qt plugin options
-no-*-*|-plugin-*-*|-qt-*-*)
VAR=`echo $1 | sed "s,^-[^-]*-\(.*\),\1,"`
VAL=`echo $1 | sed "s,^-\([^-]*\).*,\1,"`
;;
#Qt style no options
-no-*)
VAR=`echo $1 | sed "s,^-no-\(.*\),\1,"`
VAL=no
;;
#Qt style yes options
-profile|-shared|-static|-sm|-xinerama|-xshape|-xsync|-xinput|-xinput2|-egl|-reduce-exports|-pch|-separate-debug-info|-stl|-freetype|-xcursor|-xfixes|-xrandr|-xrender|-mitshm|-fontconfig|-xkb|-xcb|-eglfs|-nis|-dbus|-dbus-linked|-glib|-gstreamer|-gtkstyle|-cups|-iconv|-largefile|-h|-help|-v|-verbose|-debug|-release|-fast|-accessibility|-confirm-license|-gnumake|-framework|-debug-and-release|-exceptions|-harfbuzz|-prefix-install|-silent|-optimized-qmake|-dwarf2|-reduce-relocations|-sse|-openssl|-openssl-linked|-phonon-backend|-audio-backend|-declarative-debug|-javascript-jit|-rpath|-force-pkg-config|-icu|-force-asserts|-testcocoon)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
VAL=yes
;;
#Qt style options that pass an argument
-qconfig)
CFG_QCONFIG="$VAL"
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
shift
VAL=$1
;;
-prefix|-docdir|-headerdir|-plugindir|-importdir|-datadir|-libdir|-bindir|-translationdir|-sysconfdir|-examplesdir|-testsdir|-depths|-make|-nomake|-platform|-xplatform|-device|-device-option|-sdk|-arch|-host-arch|-mysql_config|-sysroot|-hostdatadir|-hostbindir)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
shift
VAL="$1"
;;
#Qt style complex options in one command
-enable-*|-disable-*)
VAR=`echo $1 | sed "s,^-\([^-]*\)-.*,\1,"`
VAL=`echo $1 | sed "s,^-[^-]*-\(.*\),\1,"`
;;
#Qt Builtin/System style options
-no-*|-system-*|-qt-*)
VAR=`echo $1 | sed "s,^-[^-]*-\(.*\),\1,"`
VAL=`echo $1 | sed "s,^-\([^-]*\)-.*,\1,"`
;;
#Options that cannot be generalized
-k|-continue)
VAR=fatal_error
VAL=no
;;
-opengl)
VAR=opengl
# this option may or may not be followed by an argument
if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then
VAL=yes
else
shift;
VAL=$1
fi
;;
-openvg)
VAR=openvg
# this option may or may not be followed by an argument
if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then
VAL=yes
else
shift;
VAL=$1
fi
;;
-hostprefix)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
# this option may or may not be followed by an argument
if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then
VAL=$outpath
else
shift;
VAL=$1
fi
;;
-qtnamespace)
VAR="qtnamespace"
shift
VAL="$1"
;;
-qtlibinfix)
VAR="qtlibinfix"
shift
VAL="$1"
;;
-D?*|-D)
VAR="add_define"
if [ "$1" = "-D" ]; then
shift
VAL="$1"
else
VAL=`echo $1 | sed 's,-D,,'`
fi
;;
-fpu)
VAR="fpu"
# this option may or may not be followed by an argument
if [ -z "$2" ] || echo "$2" | grep '^-' >/dev/null 2>&1; then
VAL=no
else
shift
VAL=$1
fi
;;
-I?*|-I)
VAR="add_ipath"
if [ "$1" = "-I" ]; then
shift
VAL="$1"
else
VAL=`echo $1 | sed 's,-I,,'`
fi
;;
-L?*|-L)
VAR="add_lpath"
if [ "$1" = "-L" ]; then
shift
VAL="$1"
else
VAL=`echo $1 | sed 's,-L,,'`
fi
;;
-R?*|-R)
VAR="add_rpath"
if [ "$1" = "-R" ]; then
shift
VAL="$1"
else
VAL=`echo $1 | sed 's,-R,,'`
fi
;;
-l?*)
VAR="add_link"
VAL=`echo $1 | sed 's,-l,,'`
;;
-F?*|-F)
VAR="add_fpath"
if [ "$1" = "-F" ]; then
shift
VAL="$1"
else
VAL=`echo $1 | sed 's,-F,,'`
fi
;;
-fw?*|-fw)
VAR="add_framework"
if [ "$1" = "-fw" ]; then
shift
VAL="$1"
else
VAL=`echo $1 | sed 's,-fw,,'`
fi
;;
-W*)
VAR="add_warn"
VAL="$1"
;;
-*)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
VAL="unknown"
;;
*)
UNKNOWN_ARG=yes
;;
esac
if [ "$UNKNOWN_ARG" = "yes" ]; then
echo "$1: unknown argument"
OPT_HELP=yes
ERROR=yes
shift
continue
fi
shift
UNKNOWN_OPT=no
case "$VAR" in
accessibility)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_ACCESSIBILITY="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
license)
LICENSE_FILE="$VAL"
;;
gnumake)
CFG_USE_GNUMAKE="$VAL"
;;
mysql_config)
CFG_MYSQL_CONFIG="$VAL"
;;
prefix)
QT_INSTALL_PREFIX="$VAL"
;;
hostprefix)
QT_HOST_PREFIX="$VAL"
;;
hostdatadir)
QT_HOST_DATA="$VAL"
;;
hostbindir)
QT_HOST_BINS="$VAL"
;;
force-pkg-config)
QT_FORCE_PKGCONFIG=yes
;;
docdir)
QT_INSTALL_DOCS="$VAL"
;;
headerdir)
QT_INSTALL_HEADERS="$VAL"
;;
plugindir)
QT_INSTALL_PLUGINS="$VAL"
;;
importdir)
QT_INSTALL_IMPORTS="$VAL"
;;
datadir)
QT_INSTALL_DATA="$VAL"
;;
libdir)
QT_INSTALL_LIBS="$VAL"
;;
qtnamespace)
QT_NAMESPACE="$VAL"
;;
qtlibinfix)
QT_LIBINFIX="$VAL"
;;
translationdir)
QT_INSTALL_TRANSLATIONS="$VAL"
;;
sysconfdir|settingsdir)
QT_INSTALL_SETTINGS="$VAL"
;;
examplesdir)
QT_INSTALL_EXAMPLES="$VAL"
;;
testsdir)
QT_INSTALL_TESTS="$VAL"
;;
qconfig)
CFG_QCONFIG="$VAL"
;;
sysroot)
CFG_SYSROOT="$VAL"
;;
bindir)
QT_INSTALL_BINS="$VAL"
;;
sxe)
CFG_SXE="$VAL"
;;
sse)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_SSE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
opengl)
if [ "$VAL" = "auto" ] || [ "$VAL" = "desktop" ] ||
[ "$VAL" = "yes" ] || [ "$VAL" = "no" ] ||
[ "$VAL" = "es2" ]; then
CFG_OPENGL="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
openvg)
if [ "$VAL" = "auto" ] || [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_OPENVG="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
nomake)
CFG_NOBUILD_PARTS="$CFG_NOBUILD_PARTS $VAL"
;;
make)
CFG_BUILD_PARTS="$CFG_BUILD_PARTS $VAL"
;;
sdk)
if [ "$BUILD_ON_MAC" = "yes" ]; then
CFG_SDK="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
dwarf2)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_MAC_DWARF2="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
arch|host-arch)
OPT_OBSOLETE_HOST_ARG=yes
;;
harfbuzz)
if [ "$BUILD_ON_MAC" = "yes" ] && [ "$VAL" = "yes" ]; then
CFG_MAC_HARFBUZZ="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
framework)
if [ "$BUILD_ON_MAC" = "yes" ]; then
CFG_FRAMEWORK="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
profile)
if [ "$VAL" = "yes" ]; then
CFG_PROFILE=yes
QMakeVar add QMAKE_CFLAGS -pg
QMakeVar add QMAKE_CXXFLAGS -pg
QMakeVar add QMAKE_LFLAGS -pg
QMAKE_VARS="$QMAKE_VARS CONFIG+=nostrip"
else
UNKNOWN_OPT=yes
fi
;;
testcocoon)
if [ "$VAL" = "yes" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG testcocoon"
fi
;;
exceptions|g++-exceptions)
if [ "$VAL" = "no" ]; then
CFG_EXCEPTIONS=no
elif [ "$VAL" = "yes" ]; then
CFG_EXCEPTIONS=yes
else
UNKNOWN_OPT=yes
fi
;;
platform)
PLATFORM="$VAL"
# keep compatibility with old platform names
case $PLATFORM in
aix-64)
PLATFORM=aix-xlc-64
;;
hpux-o64)
PLATFORM=hpux-acc-o64
;;
hpux-n64)
PLATFORM=hpux-acc-64
;;
hpux-acc-n64)
PLATFORM=hpux-acc-64
;;
irix-n32)
PLATFORM=irix-cc
;;
irix-64)
PLATFORM=irix-cc-64
;;
irix-cc-n64)
PLATFORM=irix-cc-64
;;
reliant-64)
PLATFORM=reliant-cds-64
;;
solaris-64)
PLATFORM=solaris-cc-64
;;
openunix-cc)
PLATFORM=unixware-cc
;;
openunix-g++)
PLATFORM=unixware-g++
;;
unixware7-cc)
PLATFORM=unixware-cc
;;
unixware7-g++)
PLATFORM=unixware-g++
;;
macx-g++-64)
PLATFORM=macx-g++
NATIVE_64_ARCH=
case `uname -p` in
i386) NATIVE_64_ARCH="x86_64" ;;
powerpc) NATIVE_64_ARCH="ppc64" ;;
*) echo "WARNING: Can't detect CPU architecture for macx-g++-64" ;;
esac
if [ ! -z "$NATIVE_64_ARCH" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG $NATIVE_64_ARCH"
fi
;;
esac
;;
xplatform)
XPLATFORM="$VAL"
case `basename "$XPLATFORM"` in win32-g++*) XPLATFORM_MINGW=yes;; esac
;;
device)
XPLATFORM="devices/$VAL"
;;
device-option)
DEV_VAR=`echo $VAL | sed "s,^\(.*\)=.*,\1,"`
DEV_VAL=`echo $VAL | sed "s,^.*=\(.*\),\1,"`
DeviceVar set $DEV_VAR $DEV_VAL
;;
debug-and-release)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_DEBUG_RELEASE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
optimized-qmake)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_RELEASE_QMAKE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
release)
if [ "$VAL" = "yes" ]; then
CFG_DEBUG=no
elif [ "$VAL" = "no" ]; then
CFG_DEBUG=yes
else
UNKNOWN_OPT=yes
fi
;;
prefix-install)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_PREFIX_INSTALL="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
debug)
CFG_DEBUG="$VAL"
;;
developer-build|commercial|opensource)
# These switches have been dealt with already
;;
static)
if [ "$VAL" = "yes" ]; then
CFG_SHARED=no
elif [ "$VAL" = "no" ]; then
CFG_SHARED=yes
else
UNKNOWN_OPT=yes
fi
;;
fatal_error)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_CONFIGURE_EXIT_ON_ERROR="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
feature-*)
FEATURE=`echo $VAR | sed "s,^[^-]*-\([^-]*\),\1," | tr 'abcdefghijklmnopqrstuvwxyz-' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'`
if [ "$VAL" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_$FEATURE"
elif [ "$VAL" = "yes" ] || [ "$VAL" = "unknown" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_$FEATURE"
else
UNKNOWN_OPT=yes
fi
;;
shared)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_SHARED="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
gif)
if [ "$VAL" = "no" ]; then
CFG_GIF="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sm)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_SM="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xinerama)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then
CFG_XINERAMA="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xshape)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XSHAPE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xvideo)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XVIDEO="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xsync)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XSYNC="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xinput2)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XINPUT2="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xinput)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then
CFG_XINPUT="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
egl)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_EGL="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
stl)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_STL="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
pch)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_PRECOMPILE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
separate-debug-info)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_SEPARATE_DEBUG_INFO="$VAL"
elif [ "$VAL" = "nocopy" ] ; then
CFG_SEPARATE_DEBUG_INFO="yes"
CFG_SEPARATE_DEBUG_INFO_NOCOPY="yes"
else
UNKNOWN_OPT=yes
fi
;;
reduce-exports)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_REDUCE_EXPORTS="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
mmx)
if [ "$VAL" = "no" ]; then
CFG_MMX="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
3dnow)
if [ "$VAL" = "no" ]; then
CFG_3DNOW="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sse)
if [ "$VAL" = "no" ]; then
CFG_SSE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sse2)
if [ "$VAL" = "no" ]; then
CFG_SSE2="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sse3)
if [ "$VAL" = "no" ]; then
CFG_SSE3="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
ssse3)
if [ "$VAL" = "no" ]; then
CFG_SSSE3="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sse4.1)
if [ "$VAL" = "no" ]; then
CFG_SSE4_1="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sse4.2)
if [ "$VAL" = "no" ]; then
CFG_SSE4_2="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
avx)
if [ "$VAL" = "no" ]; then
CFG_AVX="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
iwmmxt)
CFG_IWMMXT="yes"
;;
neon)
if [ "$VAL" = "no" ]; then
CFG_NEON="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
mips_dsp)
if [ "$VAL" = "no" ]; then
CFG_MIPS_DSP="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
mips_dspr2)
if [ "$VAL" = "no" ]; then
CFG_MIPS_DSPR2="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
reduce-relocations)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_REDUCE_RELOCATIONS="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
zlib)
[ "$VAL" = "qt" ] && VAL=yes
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ]; then
CFG_ZLIB="$VAL"
else
UNKNOWN_OPT=yes
fi
# No longer supported:
#[ "$VAL" = "no" ] && CFG_LIBPNG=no
;;
sqlite)
if [ "$VAL" = "system" ]; then
CFG_SQLITE=system
else
UNKNOWN_OPT=yes
fi
;;
libpng)
[ "$VAL" = "yes" ] && VAL=qt
if [ "$VAL" = "qt" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ]; then
CFG_LIBPNG="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
libjpeg)
[ "$VAL" = "yes" ] && VAL=qt
if [ "$VAL" = "qt" ] || [ "$VAL" = "no" ] || [ "$VAL" = "system" ]; then
CFG_LIBJPEG="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xcursor)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then
CFG_XCURSOR="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xfixes)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then
CFG_XFIXES="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xrandr)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "runtime" ]; then
CFG_XRANDR="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xrender)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XRENDER="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
mitshm)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_MITSHM="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
fontconfig)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_FONTCONFIG="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xkb)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XKB="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
xcb)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_XCB="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
wayland)
CFG_OBSOLETE_WAYLAND=yes
;;
eglfs)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_EGLFS="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
libudev)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_LIBUDEV="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
evdev)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_EVDEV="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
cups)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_CUPS="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
iconv)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_ICONV="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
glib)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_GLIB="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
gstreamer)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_GSTREAMER="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
gtkstyle)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_QGTKSTYLE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
gui)
if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ]; then
CFG_GUI="yes"
else
if [ "$VAL" = "no" ]; then
CFG_GUI="no"
else
UNKNOWN_OPT=yes
fi
fi
;;
widgets)
if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ]; then
CFG_WIDGETS="yes"
elif [ "$VAL" = "no" ]; then
CFG_WIDGETS="no"
else
UNKNOWN_OPT=yes
fi
;;
qpa-platform-guard)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
QPA_PLATFORM_GUARD="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
dbus)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "linked" ]; then
CFG_DBUS="$VAL"
elif [ "$VAL" = "runtime" ]; then
CFG_DBUS="yes"
else
UNKNOWN_OPT=yes
fi
;;
dbus-linked)
if [ "$VAL" = "yes" ]; then
CFG_DBUS="linked"
else
UNKNOWN_OPT=yes
fi
;;
nis)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_NIS="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
largefile)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_LARGEFILE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
openssl)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_OPENSSL="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
openssl-linked)
if [ "$VAL" = "yes" ]; then
CFG_OPENSSL="linked"
else
UNKNOWN_OPT=yes
fi
;;
declarative-debug)
if [ "$VAL" = "yes" ]; then
CFG_DECLARATIVE_DEBUG="yes"
else
if [ "$VAL" = "no" ]; then
CFG_DECLARATIVE_DEBUG="no"
else
UNKNOWN_OPT=yes
fi
fi
;;
javascript-jit)
if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ] || [ "$VAL" = "no" ]; then
CFG_JAVASCRIPTCORE_JIT="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
confirm-license)
if [ "$VAL" = "yes" ]; then
OPT_CONFIRM_LICENSE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
h|help)
if [ "$VAL" = "yes" ]; then
OPT_HELP="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
sql-*|imageformat-*)
# if Qt style options were used, $VAL can be "no", "qt", or "plugin"
# if autoconf style options were used, $VAL can be "yes" or "no"
[ "$VAL" = "yes" ] && VAL=qt
# now $VAL should be "no", "qt", or "plugin"... double-check
if [ "$VAL" != "no" ] && [ "$VAL" != "qt" ] && [ "$VAL" != "plugin" ]; then
UNKNOWN_OPT=yes
fi
# now $VAL is "no", "qt", or "plugin"
OPT="$VAL"
VAL=`echo $VAR | sed "s,^[^-]*-\([^-]*\).*,\1,"`
VAR=`echo $VAR | sed "s,^\([^-]*\).*,\1,"`
# Grab the available values
case "$VAR" in
sql)
avail="$CFG_SQL_AVAILABLE"
;;
imageformat)
avail="$CFG_IMAGEFORMAT_PLUGIN_AVAILABLE"
if [ "$OPT" != "plugin" ]; then
# png is always built in
avail="$avail png"
fi
;;
*)
avail=""
echo "BUG: Unhandled type $VAR used in $CURRENT_OPT"
;;
esac
# Check that that user's value is available.
found=no
for d in $avail; do
if [ "$VAL" = "$d" ]; then
found=yes
break
fi
done
[ "$found" = yes ] || ERROR=yes
if [ "$VAR" = "sql" ]; then
# set the CFG_SQL_driver
eval "CFG_SQL_$VAL=\$OPT"
continue
elif [ "$VAR" = "imageformat" ]; then
[ "$OPT" = "qt" ] && OPT=yes
VAL="`echo $VAL |tr a-z A-Z`"
eval "CFG_$VAL=$OPT"
continue
fi
if [ "$OPT" = "plugin" ] || [ "$OPT" = "qt" ]; then
if [ "$OPT" = "plugin" ]; then
VAR="${VAR}-${OPT}"
fi
QMakeVar add "${VAR}s" "${VAL}"
elif [ "$OPT" = "no" ]; then
PLUG_VAR="${VAR}-plugin"
IN_VAR="${VAR}"
QMakeVar del "${IN_VAR}s" "$VAL"
QMakeVar del "${PLUG_VAR}s" "$VAL"
fi
if [ "$ERROR" = "yes" ]; then
echo "$CURRENT_OPT: unknown argument"
OPT_HELP=yes
fi
;;
v|verbose)
if [ "$VAL" = "yes" ]; then
if [ "$OPT_VERBOSE" = "$VAL" ]; then # takes two verboses to turn on qmake debugs
QMAKE_SWITCHES="$QMAKE_SWITCHES -d"
else
OPT_VERBOSE=yes
fi
elif [ "$VAL" = "no" ]; then
if [ "$OPT_VERBOSE" = "$VAL" ] && echo "$QMAKE_SWITCHES" | grep ' -d' >/dev/null 2>&1; then
QMAKE_SWITCHES=`echo $QMAKE_SWITCHES | sed "s, -d,,"`
else
OPT_VERBOSE=no
fi
else
UNKNOWN_OPT=yes
fi
;;
fast)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
OPT_FAST="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
rpath)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_RPATH="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
add_define)
D_FLAGS="$D_FLAGS \"$VAL\""
;;
add_ipath)
I_FLAGS="$I_FLAGS -I\"${VAL}\""
;;
add_lpath)
L_FLAGS="$L_FLAGS -L\"${VAL}\""
;;
add_rpath)
RPATH_FLAGS="$RPATH_FLAGS \"${VAL}\""
;;
add_link)
l_FLAGS="$l_FLAGS -l\"${VAL}\""
;;
add_fpath)
if [ "$BUILD_ON_MAC" = "yes" ]; then
L_FLAGS="$L_FLAGS -F\"${VAL}\""
I_FLAGS="$I_FLAGS -F\"${VAL}\""
else
UNKNOWN_OPT=yes
fi
;;
add_framework)
if [ "$BUILD_ON_MAC" = "yes" ]; then
l_FLAGS="$l_FLAGS -framework \"${VAL}\""
else
UNKNOWN_OPT=yes
fi
;;
add_warn)
W_FLAGS="$W_FLAGS \"${VAL}\""
;;
silent)
CFG_SILENT="$VAL"
;;
phonon-backend)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_PHONON_BACKEND="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
dont-process)
CFG_NOPROCESS=yes
;;
process)
CFG_NOPROCESS=no
;;
audio-backend)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_AUDIO_BACKEND="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
icu)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_ICU="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
force-asserts)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_FORCE_ASSERTS="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
pcre)
if [ "$VAL" = "qt" ] || [ "$VAL" = "system" ]; then
CFG_PCRE="$VAL"
else
UNKNOWN_OPT=yes
fi
;;
*)
UNKNOWN_OPT=yes
;;
esac
if [ "$UNKNOWN_OPT" = "yes" ]; then
echo "${CURRENT_OPT}: invalid command-line switch"
OPT_HELP=yes
ERROR=yes
fi
done
# update QT_CONFIG to show our current predefined configuration
case "$CFG_QCONFIG" in
minimal|small|medium|large|full)
# these are a sequence of increasing functionality
for c in minimal small medium large full; do
QT_CONFIG="$QT_CONFIG $c-config"
[ "$CFG_QCONFIG" = $c ] && break
done
;;
*)
# not known to be sufficient for anything
if [ '!' -f "$relpath/src/corelib/global/qconfig-${CFG_QCONFIG}.h" ] && [ '!' -f `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"` ]; then
echo >&2 "Error: configuration file not found:"
echo >&2 " $relpath/src/corelib/global/qconfig-${CFG_QCONFIG}.h"
echo >&2 " or"
echo >&2 " `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"`"
OPT_HELP=yes
fi
esac
#-------------------------------------------------------------------------------
# build tree initialization
#-------------------------------------------------------------------------------
# where to find which..
unixtests="$relpath/config.tests/unix"
mactests="$relpath/config.tests/mac"
WHICH="$unixtests/which.test"
PERL=`$WHICH perl 2>/dev/null`
# find out which awk we want to use, prefer gawk, then nawk, then regular awk
AWK=
for e in gawk nawk awk; do
if "$WHICH" $e >/dev/null 2>&1 && ( $e -f /dev/null /dev/null ) >/dev/null 2>&1; then
AWK=$e
break
fi
done
# find perl
PERL="/usr/bin/perl"
if "$WHICH" perl >/dev/null 2>&1 && ( perl /dev/null ) >/dev/null 2>&1; then
PERL=`$WHICH perl`
fi
### skip this if the user just needs help...
if [ "$OPT_HELP" != "yes" ]; then
# is this a shadow build?
if [ "$OPT_SHADOW" = "maybe" ]; then
OPT_SHADOW=no
if [ "$relpath" != "$outpath" ] && [ '!' -f "$outpath/configure" ]; then
if [ -h "$outpath" ]; then
[ "$relpath" -ef "$outpath" ] || OPT_SHADOW=yes
else
OPT_SHADOW=yes
fi
fi
fi
if [ "$OPT_SHADOW" = "yes" ]; then
if [ -f "$relpath/.qmake.cache" -o -f "$relpath/src/corelib/global/qconfig.h" -o -f "$relpath/src/corelib/global/qconfig.cpp" ]; then
echo >&2 "You cannot make a shadow build from a source tree containing a previous build."
echo >&2 "Cannot proceed."
exit 1
fi
[ "$OPT_VERBOSE" = "yes" ] && echo "Performing shadow build..."
fi
if [ "$PLATFORM_MAC" = "no" -a "$CFG_DEBUG_RELEASE" = "yes" ]; then
echo
echo "WARNING: -debug-and-release is not supported outside of Mac OS X."
echo "Qt can be built in release mode with separate debug information, so"
echo "-debug-and-release is not necessary anymore"
echo
fi
if [ "$CFG_SILENT" = "yes" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG silent"
fi
# if the source tree is different from the build tree,
# symlink or copy part of the sources
if [ "$OPT_SHADOW" = "yes" ]; then
echo "Preparing build tree..."
if [ -z "$PERL" ]; then
echo
echo "You need perl in your PATH to make a shadow build."
echo "Cannot proceed."
exit 1
fi
[ -d "$outpath/bin" ] || mkdir -p "$outpath/bin"
# make a syncqt script that can be used in the shadow
rm -f "$outpath/bin/syncqt"
if [ -x "$relpath/bin/syncqt" ]; then
mkdir -p "$outpath/bin"
echo "#!/bin/sh" >"$outpath/bin/syncqt"
echo "perl \"$relpath/bin/syncqt\" -qtdir \"$outpath\" \"\$@\"" >>"$outpath/bin/syncqt"
chmod 755 "$outpath/bin/syncqt"
fi
for i in elf2e32_qtwrapper createpackage patch_capabilities qtmodule-configtests; do
rm -f "$outpath/bin/$i"
if [ -x "$relpath/bin/$i" ]; then
mkdir -p "$outpath/bin"
echo "#!/bin/sh" >"$outpath/bin/$i"
echo "QTDIR=\"$relpath\"; export QTDIR" >>"$outpath/bin/$i"
echo "\"$relpath/bin/$i\" \"\$@\"" >>"$outpath/bin/$i"
chmod 755 "$outpath/bin/$i"
fi
done
# save a pre-existing mkspecs/modules dir
test -d "$outpath/mkspecs/modules" && \
mv "$outpath/mkspecs/modules" "$outpath/mkspecs-modules"
# symlink the mkspecs directory
mkdir -p "$outpath/mkspecs"
rm -rf "$outpath"/mkspecs/*
ln -s "$relpath"/mkspecs/* "$outpath/mkspecs"
rm -f "$outpath/mkspecs/default"
ShadowMkspecs()
{
rm -rf "$outpath/mkspecs/$1"
find "$relpath/mkspecs/$1" -type d | sed "s,^$relpath,$outpath," | xargs mkdir -p
find "$relpath/mkspecs/$1" -type f | sed "s,^$relpath/,," | while read f; do ln -s "$relpath/$f" "$outpath/$f"; done
}
# Special case for mkspecs/features directory.
# To be able to place .prf files into a shadow build directory,
# we're creating links for files only. The directory structure is reproduced.
ShadowMkspecs features
# The modules dir is special, too.
if test -d "$outpath/mkspecs-modules"; then
rm -rf "$outpath/mkspecs/modules"
mv "$outpath/mkspecs-modules" "$outpath/mkspecs/modules"
else
ShadowMkspecs modules
fi
# symlink the doc directory
rm -rf "$outpath/doc"
ln -s "$relpath/doc" "$outpath/doc"
fi
# symlink fonts to be able to run application from build directory
if [ ! -d "${outpath}/lib/fonts" ]; then
if [ "$PLATFORM" = "$XPLATFORM" ]; then
mkdir -p "${outpath}/lib"
ln -s "${relpath}/lib/fonts" "${outpath}/lib/fonts"
fi
fi
if [ "$OPT_FAST" = "auto" ]; then
if [ '!' -z "$AWK" ] && [ "$CFG_DEV" = "yes" ]; then
OPT_FAST=yes
else
OPT_FAST=no
fi
fi
# find a make command
if [ -z "$MAKE" ]; then
MAKE=
for mk in gmake make; do
if "$WHICH" $mk >/dev/null 2>&1; then
MAKE=`"$WHICH" $mk`
break
fi
done
if [ -z "$MAKE" ]; then
echo >&2 "You don't seem to have 'make' or 'gmake' in your PATH."
echo >&2 "Cannot proceed."
exit 1
fi
# export MAKE, we need it later in the config.tests
export MAKE
fi
fi ### help
#-------------------------------------------------------------------------------
# auto-detect all that hasn't been specified in the arguments
#-------------------------------------------------------------------------------
if [ -z "$PLATFORM" ]; then
PLATFORM_NOTES=
case "$UNAME_SYSTEM:$UNAME_RELEASE" in
Darwin:*)
OSX_VERSION=`uname -r | cut -d. -f1`
if [ "$OSX_VERSION" -ge 11 ]; then
# We're on Lion or above. Check if we have a supported Clang version
case "$(clang -v 2>&1 | grep -Po '(?<=version )\d[\d.]+')" in
3.*)
PLATFORM=macx-clang
PLATFORM_NOTES="\n - Also available for Mac OS X: macx-g++\n"
;;
*)
PLATFORM=macx-g++
;;
esac
else
PLATFORM=macx-g++
fi
;;
AIX:*)
#PLATFORM=aix-g++
#PLATFORM=aix-g++-64
PLATFORM=aix-xlc
#PLATFORM=aix-xlc-64
PLATFORM_NOTES="
- Also available for AIX: aix-g++ aix-g++-64 aix-xlc-64
"
;;
GNU:*)
PLATFORM=hurd-g++
;;
dgux:*)
PLATFORM=dgux-g++
;;
# DYNIX/ptx:4*)
# PLATFORM=dynix-g++
# ;;
ULTRIX:*)
PLATFORM=ultrix-g++
;;
FreeBSD:*)
PLATFORM=freebsd-g++
PLATFORM_NOTES="
- Also available for FreeBSD: freebsd-icc
"
;;
OpenBSD:*)
PLATFORM=openbsd-g++
;;
NetBSD:*)
PLATFORM=netbsd-g++
;;
BSD/OS:*|BSD/386:*)
PLATFORM=bsdi-g++
;;
IRIX*:*)
#PLATFORM=irix-g++
PLATFORM=irix-cc
#PLATFORM=irix-cc-64
PLATFORM_NOTES="
- Also available for IRIX: irix-g++ irix-cc-64
"
;;
HP-UX:*)
case "$UNAME_MACHINE" in
ia64)
#PLATFORM=hpuxi-acc-32
PLATFORM=hpuxi-acc-64
PLATFORM_NOTES="
- Also available for HP-UXi: hpuxi-acc-32
"
;;
*)
#PLATFORM=hpux-g++
PLATFORM=hpux-acc
#PLATFORM=hpux-acc-64
#PLATFORM=hpux-cc
#PLATFORM=hpux-acc-o64
PLATFORM_NOTES="
- Also available for HP-UX: hpux-g++ hpux-acc-64 hpux-acc-o64
"
;;
esac
;;
OSF1:*)
#PLATFORM=tru64-g++
PLATFORM=tru64-cxx
PLATFORM_NOTES="
- Also available for Tru64: tru64-g++
"
;;
Linux:*)
case "$UNAME_MACHINE" in
x86_64|s390x|ppc64)
PLATFORM=linux-g++-64
;;
*)
PLATFORM=linux-g++
;;
esac
PLATFORM_NOTES="
- Also available for Linux: linux-kcc linux-icc linux-cxx
"
;;
SunOS:5*)
if [ "$XPLATFORM_MINGW" = "yes" ]; then
PLATFORM="solaris-g++"
else
#PLATFORM=solaris-g++
PLATFORM=solaris-cc
#PLATFORM=solaris-cc64
fi
PLATFORM_NOTES="
- Also available for Solaris: solaris-g++ solaris-cc-64
"
;;
ReliantUNIX-*:*|SINIX-*:*)
PLATFORM=reliant-cds
#PLATFORM=reliant-cds-64
PLATFORM_NOTES="
- Also available for Reliant UNIX: reliant-cds-64
"
;;
CYGWIN*:*)
PLATFORM=cygwin-g++
;;
LynxOS*:*)
PLATFORM=lynxos-g++
;;
OpenUNIX:*)
#PLATFORM=unixware-g++
PLATFORM=unixware-cc
PLATFORM_NOTES="
- Also available for OpenUNIX: unixware-g++
"
;;
UnixWare:*)
#PLATFORM=unixware-g++
PLATFORM=unixware-cc
PLATFORM_NOTES="
- Also available for UnixWare: unixware-g++
"
;;
SCO_SV:*)
#PLATFORM=sco-g++
PLATFORM=sco-cc
PLATFORM_NOTES="
- Also available for SCO OpenServer: sco-g++
"
;;
UNIX_SV:*)
PLATFORM=unixware-g++
;;
QNX:*)
PLATFORM=unsupported/qnx-g++
;;
*)
if [ "$OPT_HELP" != "yes" ]; then
echo
for p in $PLATFORMS; do
echo " $relconf $* -platform $p"
done
echo >&2
echo " The build script does not currently recognize all" >&2
echo " platforms supported by Qt." >&2
echo " Rerun this script with a -platform option listed to" >&2
echo " set the system/compiler combination you use." >&2
echo >&2
exit 2
fi
esac
fi
PLATFORMS=`find "$relpath/mkspecs/" -type f | grep -v qws | sed "s,$relpath/mkspecs/qws/,,"`
[ -z "$XPLATFORM" ] && XPLATFORM="$PLATFORM"
case `basename "$XPLATFORM"` in win32-g++*) XPLATFORM_MINGW=yes;; esac
case "$XPLATFORM" in linux-g++-maemo) XPLATFORM_MAEMO=yes;; esac
if [ -d "$PLATFORM" ]; then
QMAKESPEC="$PLATFORM"
else
QMAKESPEC="$relpath/mkspecs/${PLATFORM}"
fi
if [ -d "$XPLATFORM" ]; then
XQMAKESPEC="$XPLATFORM"
else
XQMAKESPEC="$relpath/mkspecs/${XPLATFORM}"
fi
if [ "$PLATFORM" != "$XPLATFORM" ]; then
QT_CROSS_COMPILE=yes
QMAKE_CONFIG="$QMAKE_CONFIG cross_compile"
QTCONFIG_CONFIG="$QTCONFIG_CONFIG cross_compile"
fi
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ `basename $QMAKESPEC` = "macx-xcode" ] || [ `basename $XQMAKESPEC` = "macx-xcode" ]; then
echo >&2
echo " Platform 'macx-xcode' should not be used when building Qt/Mac." >&2
echo " Please build Qt/Mac with 'macx-g++', then if you would like to" >&2
echo " use mac-xcode on your application code it can link to a Qt/Mac" >&2
echo " built with 'macx-g++'" >&2
echo >&2
exit 2
fi
fi
# check specified platforms are supported
if [ '!' -d "$QMAKESPEC" ]; then
echo
echo " The specified system/compiler is not supported:"
echo
echo " $QMAKESPEC"
echo
echo " Please see the README file for a complete list."
echo
exit 2
fi
if [ '!' -d "$XQMAKESPEC" ]; then
echo
echo " The specified system/compiler is not supported:"
echo
echo " $XQMAKESPEC"
echo
echo " Please see the README file for a complete list."
echo
exit 2
fi
if [ '!' -f "${XQMAKESPEC}/qplatformdefs.h" ]; then
echo
echo " The specified system/compiler port is not complete:"
echo
echo " $XQMAKESPEC/qplatformdefs.h"
echo
echo " Please contact qt-info@nokia.com."
echo
exit 2
fi
if [ "$UNAME_SYSTEM" = "SunOS" ]; then
# Solaris 2.5 and 2.6 have libposix4, which was renamed to librt for Solaris 7 and up
if echo $UNAME_RELEASE | grep "^5\.[5|6]" >/dev/null 2>&1; then
sed -e "s,-lrt,-lposix4," "$XQMAKESPEC/qmake.conf" > "$XQMAKESPEC/qmake.conf.new"
mv "$XQMAKESPEC/qmake.conf.new" "$XQMAKESPEC/qmake.conf"
fi
fi
if [ "$CFG_RTOS_ENABLED" = "no" ]; then
case `basename "$XPLATFORM"` in
qnx-* | vxworks-*)
echo ""
echo "You are not licensed for Qt for `basename $XPLATFORM`."
echo ""
echo "Please contact qt-info@nokia.com to upgrade your license to"
echo "include this platform, or install the Qt Open Source Edition"
echo "if you intend to develop free software."
exit 1
;;
esac
fi
#-------------------------------------------------------------------------------
# write out device config before we run the test.
#-------------------------------------------------------------------------------
if cmp -s "$DEVICE_VARS_FILE" "$outpath/mkspecs/qdevice.pri"; then
rm -f "$DEVICE_VARS_FILE"
else
mv -f $DEVICE_VARS_FILE "$outpath/mkspecs/qdevice.pri"
fi
#-------------------------------------------------------------------------------
# tests that don't need qmake (must be run before displaying help)
#-------------------------------------------------------------------------------
# detect build style
if [ "$CFG_DEBUG" = "auto" ]; then
if [ "$PLATFORM_MAC" = "yes" -o "$XPLATFORM_MINGW" = "yes" ]; then
CFG_DEBUG_RELEASE=yes
CFG_DEBUG=yes
elif [ "$CFG_DEV" = "yes" ]; then
CFG_DEBUG_RELEASE=no
CFG_DEBUG=yes
else
CFG_DEBUG_RELEASE=no
CFG_DEBUG=no
fi
fi
if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then
QT_CONFIG="$QT_CONFIG build_all"
fi
if [ -z "$PKG_CONFIG" ]; then
# See if PKG_CONFIG is set in the mkspec:
PKG_CONFIG=`getXQMakeConf PKG_CONFIG`
fi
if [ -z "$PKG_CONFIG" ]; then
PKG_CONFIG=`"$WHICH" pkg-config 2>/dev/null`
fi
# Work out if we can use pkg-config
if [ "$QT_CROSS_COMPILE" = "yes" ]; then
if [ "$QT_FORCE_PKGCONFIG" = "yes" ]; then
echo >&2 ""
echo >&2 "You have asked to use pkg-config and are cross-compiling."
echo >&2 "Please make sure you have a correctly set-up pkg-config"
echo >&2 "environment!"
echo >&2 ""
if [ -z "$PKG_CONFIG_LIBDIR" ]; then
echo >&2 ""
echo >&2 "Warning: PKG_CONFIG_LIBDIR has not been set. This could mean"
echo >&2 "the host's .pc files will be used (even if you set PKG_CONFIG_PATH)."
echo >&2 "This is probably not what you want."
echo >&2 ""
elif [ -z "$PKG_CONFIG_SYSROOT" ] && [ -z "$PKG_CONFIG_SYSROOT_DIR" ]; then
echo >&2 ""
echo >&2 "Warning: PKG_CONFIG_SYSROOT/PKG_CONFIG_SYSROOT_DIR has not"
echo >&2 "been set. This means your toolchain's .pc files must contain"
echo >&2 "the paths to the toolchain's libraries & headers. If configure"
echo >&2 "tests are failing, please check these files."
echo >&2 ""
fi
else
echo >&2 ""
echo >&2 "You have not explicitly asked to use pkg-config and are cross-compiling."
echo >&2 "pkg-config will not be used to automatically query cflag/lib parameters for"
echo >&2 "dependencies"
echo >&2 ""
PKG_CONFIG=""
fi
fi
if [ ! -n "$PKG_CONFIG" ]; then
QT_CONFIG="$QT_CONFIG no-pkg-config"
fi
# pass on $CFG_SDK to the configure tests.
if [ '!' -z "$CFG_SDK" ]; then
MAC_CONFIG_TEST_COMMANDLINE="$MAC_CONFIG_TEST_COMMANDLINE -sdk $CFG_SDK"
fi
# find the default framework value
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ "$CFG_FRAMEWORK" = "auto" ]; then
CFG_FRAMEWORK="$CFG_SHARED"
elif [ "$CFG_FRAMEWORK" = "yes" ] && [ "$CFG_SHARED" = "no" ]; then
echo
echo "WARNING: Using static linking will disable the use of Mac frameworks."
echo
CFG_FRAMEWORK="no"
fi
else
CFG_FRAMEWORK=no
fi
QMAKE_CONF_COMPILER=`getXQMakeConf QMAKE_CXX`
TEST_COMPILER=$QMAKE_CONF_COMPILER
if [ "$XPLATFORM_SYMBIAN_SBSV2" = "no" ]; then
if [ -z "$TEST_COMPILER" ]; then
echo "ERROR: Cannot set the compiler for the configuration tests"
exit 1
fi
fi
if [ -n "$CFG_SYSROOT" ]; then
SYSROOT_FLAG="--sysroot=$CFG_SYSROOT"
else
SYSROOT_FLAG=
fi
export SYSROOT_FLAG # used by config.tests/unix/compile.test
# auto-detect precompiled header support
if [ "$CFG_PRECOMPILE" = "auto" ]; then
if "$unixtests/precomp.test" "$TEST_COMPILER" "$OPT_VERBOSE"; then
CFG_PRECOMPILE=no
else
CFG_PRECOMPILE=yes
fi
fi
#auto-detect DWARF2 on the mac
if [ "$BUILD_ON_MAC" = "yes" ] && [ "$CFG_MAC_DWARF2" = "auto" ]; then
if "$mactests/dwarf2.test" "$TEST_COMPILER" "$OPT_VERBOSE" "$mactests" ; then
CFG_MAC_DWARF2=no
else
CFG_MAC_DWARF2=yes
fi
fi
# don't autodetect support for separate debug info on objcopy when
# cross-compiling as lots of toolchains seems to have problems with this
if [ "$QT_CROSS_COMPILE" = "yes" ] && [ "$CFG_SEPARATE_DEBUG_INFO" = "auto" ]; then
CFG_SEPARATE_DEBUG_INFO="no"
fi
# auto-detect support for separate debug info in objcopy
if [ "$CFG_SEPARATE_DEBUG_INFO" != "no" ] && [ "$CFG_SHARED" = "yes" ]; then
TEST_COMPILER_CFLAGS=`getXQMakeConf QMAKE_CFLAGS`
TEST_COMPILER_CXXFLAGS=`getXQMakeConf QMAKE_CXXFLAGS`
TEST_OBJCOPY=`getXQMakeConf QMAKE_OBJCOPY`
COMPILER_WITH_FLAGS="$TEST_COMPILER $TEST_COMPILER_CXXFLAGS"
COMPILER_WITH_FLAGS=`echo "$COMPILER_WITH_FLAGS" | sed -e "s%\\$\\$QMAKE_CFLAGS%$TEST_COMPILER_CFLAGS%g"`
if "$unixtests/objcopy.test" "$COMPILER_WITH_FLAGS" "$TEST_OBJCOPY" "$OPT_VERBOSE"; then
CFG_SEPARATE_DEBUG_INFO=no
else
case "$PLATFORM" in
hpux-*)
# binutils on HP-UX is buggy; default to no.
CFG_SEPARATE_DEBUG_INFO=no
;;
*)
CFG_SEPARATE_DEBUG_INFO=yes
;;
esac
fi
fi
# auto-detect -fvisibility support
if [ "$CFG_REDUCE_EXPORTS" != "no" ]; then
if "$unixtests/fvisibility.test" "$TEST_COMPILER" "$OPT_VERBOSE"; then
if [ "$CFG_REDUCE_EXPORTS" = "yes" ]; then
echo "-reduce-exports was requested but this compiler does not support it"
echo "Re-run configure with -v for more information"
exit 1
fi
CFG_REDUCE_EXPORTS=no
else
CFG_REDUCE_EXPORTS=yes
fi
fi
# detect the availability of the -Bsymbolic-functions linker optimization
if [ "$CFG_REDUCE_RELOCATIONS" != "no" ]; then
if "$unixtests/bsymbolic_functions.test" "$TEST_COMPILER" "$OPT_VERBOSE"; then
if [ "$CFG_REDUCE_RELOCATIONS" = "yes" ]; then
echo "-reduce-relocations was requested but this compiler does not support it"
echo "Re-run configure with -v for more information"
exit 1
fi
CFG_REDUCE_RELOCATIONS=no
else
CFG_REDUCE_RELOCATIONS=yes
fi
fi
# auto-detect GNU make support
if [ "$CFG_USE_GNUMAKE" = "auto" ] && "$MAKE" -v | grep "GNU Make" >/dev/null 2>&1; then
CFG_USE_GNUMAKE=yes
fi
# find the default framework value
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ "$CFG_FRAMEWORK" = "auto" ]; then
CFG_FRAMEWORK="$CFG_SHARED"
elif [ "$CFG_FRAMEWORK" = "yes" ] && [ "$CFG_SHARED" = "no" ]; then
echo
echo "WARNING: Using static linking will disable the use of Mac frameworks."
echo
CFG_FRAMEWORK="no"
fi
else
CFG_FRAMEWORK=no
fi
#setup the build parts
if [ -z "$CFG_BUILD_PARTS" ]; then
CFG_BUILD_PARTS="$QT_DEFAULT_BUILD_PARTS"
# build tests by default, if a developer build
if [ "$CFG_DEV" = "yes" ]; then
CFG_BUILD_PARTS="$CFG_BUILD_PARTS tests"
fi
# don't build tools by default when cross-compiling
if [ "$PLATFORM" != "$XPLATFORM" ]; then
CFG_BUILD_PARTS=`echo "$CFG_BUILD_PARTS" | sed "s, tools,,g"`
fi
fi
for nobuild in $CFG_NOBUILD_PARTS; do
CFG_BUILD_PARTS=`echo "$CFG_BUILD_PARTS" | sed "s, $nobuild,,g"`
done
if echo $CFG_BUILD_PARTS | grep -v libs >/dev/null 2>&1; then
# echo
# echo "WARNING: libs is a required part of the build."
# echo
CFG_BUILD_PARTS="$CFG_BUILD_PARTS libs"
fi
#-------------------------------------------------------------------------------
# post process QT_INSTALL_* variables
#-------------------------------------------------------------------------------
if [ -z "$QT_INSTALL_PREFIX" ]; then
if [ "$CFG_DEV" = "yes" ]; then
QT_INSTALL_PREFIX="$outpath" # In Development, we use sandboxed builds by default
else
QT_INSTALL_PREFIX="/usr/local/Qt-${QT_VERSION}" # the default install prefix is /usr/local/Qt-$QT_VERSION
fi
fi
QT_INSTALL_PREFIX=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_PREFIX"`
if [ -z "$QT_INSTALL_DOCS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_DOCS="/Developer/Documentation/Qt"
fi
fi
[ -z "$QT_INSTALL_DOCS" ] && QT_INSTALL_DOCS="$QT_INSTALL_PREFIX/doc" #fallback
fi
QT_INSTALL_DOCS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_DOCS"`
if [ -z "$QT_INSTALL_HEADERS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ "$CFG_FRAMEWORK" = "yes" ]; then
QT_INSTALL_HEADERS=
fi
fi
fi
[ -z "$QT_INSTALL_HEADERS" ] && QT_INSTALL_HEADERS="$QT_INSTALL_PREFIX/include"
fi
QT_INSTALL_HEADERS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_HEADERS"`
if [ -z "$QT_INSTALL_LIBS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ "$CFG_FRAMEWORK" = "yes" ]; then
QT_INSTALL_LIBS="/Libraries/Frameworks"
fi
fi
fi
[ -z "$QT_INSTALL_LIBS" ] && QT_INSTALL_LIBS="$QT_INSTALL_PREFIX/lib" #fallback
fi
QT_INSTALL_LIBS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_LIBS"`
if [ -z "$QT_INSTALL_BINS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_BINS="/Developer/Applications/Qt"
fi
fi
[ -z "$QT_INSTALL_BINS" ] && QT_INSTALL_BINS="$QT_INSTALL_PREFIX/bin" #fallback
fi
QT_INSTALL_BINS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_BINS"`
if [ -z "$QT_INSTALL_PLUGINS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_PLUGINS="/Developer/Applications/Qt/plugins"
fi
fi
[ -z "$QT_INSTALL_PLUGINS" ] && QT_INSTALL_PLUGINS="$QT_INSTALL_PREFIX/plugins" #fallback
fi
QT_INSTALL_PLUGINS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_PLUGINS"`
if [ -z "$QT_INSTALL_IMPORTS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_IMPORTS="/Developer/Applications/Qt/imports"
fi
fi
[ -z "$QT_INSTALL_IMPORTS" ] && QT_INSTALL_IMPORTS="$QT_INSTALL_PREFIX/imports" #fallback
fi
QT_INSTALL_IMPORTS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_IMPORTS"`
if [ -z "$QT_INSTALL_DATA" ]; then #default
QT_INSTALL_DATA="$QT_INSTALL_PREFIX"
fi
QT_INSTALL_DATA=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_DATA"`
if [ -z "$QT_INSTALL_TRANSLATIONS" ]; then #default
QT_INSTALL_TRANSLATIONS="$QT_INSTALL_PREFIX/translations"
fi
QT_INSTALL_TRANSLATIONS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_TRANSLATIONS"`
if [ -z "$QT_INSTALL_SETTINGS" ]; then #default
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_SETTINGS=/Library/Preferences/Qt
else
QT_INSTALL_SETTINGS=/etc/xdg
fi
fi
QT_INSTALL_SETTINGS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_SETTINGS"`
if [ -z "$QT_INSTALL_EXAMPLES" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_EXAMPLES="/Developer/Examples/Qt"
fi
fi
[ -z "$QT_INSTALL_EXAMPLES" ] && QT_INSTALL_EXAMPLES="$QT_INSTALL_PREFIX/examples" #fallback
fi
QT_INSTALL_EXAMPLES=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_EXAMPLES"`
#tests
if [ -z "$QT_INSTALL_TESTS" ]; then #default
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_INSTALL_TESTS="/Developer/Tests/Qt"
fi
fi
[ -z "$QT_INSTALL_TESTS" ] && QT_INSTALL_TESTS="$QT_INSTALL_PREFIX/tests" #fallback
fi
QT_INSTALL_TESTS=`"$relpath/config.tests/unix/makeabs" "$QT_INSTALL_TESTS"`
#------- host paths --------
if [ -z "$QT_HOST_PREFIX" ]; then
QT_HOST_PREFIX=$QT_INSTALL_PREFIX
haveHpx=false
else
QT_HOST_PREFIX=`"$relpath/config.tests/unix/makeabs" "$QT_HOST_PREFIX"`
haveHpx=true
fi
if [ -z "$QT_HOST_BINS" ]; then #default
if $haveHpx; then
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
QT_HOST_BINS="/Developer/Applications/Qt"
fi
fi
[ -z "$QT_HOST_BINS" ] && QT_HOST_BINS="$QT_HOST_PREFIX/bin" #fallback
else
QT_HOST_BINS="$QT_INSTALL_BINS"
fi
fi
QT_HOST_BINS=`"$relpath/config.tests/unix/makeabs" "$QT_HOST_BINS"`
if [ -z "$QT_HOST_DATA" ]; then #default
if $haveHpx; then
QT_HOST_DATA="$QT_HOST_PREFIX"
else
QT_HOST_DATA="$QT_INSTALL_DATA"
fi
else
QT_HOST_DATA=`"$relpath/config.tests/unix/makeabs" "$QT_HOST_DATA"`
fi
#-------------------------------------------------------------------------------
# help - interactive parts of the script _after_ this section please
#-------------------------------------------------------------------------------
# next, emit a usage message if something failed.
if [ "$OPT_HELP" = "yes" ]; then
[ "x$ERROR" = "xyes" ] && echo
if [ "$CFG_NIS" = "no" ]; then
NSY=" "
NSN="*"
else
NSY="*"
NSN=" "
fi
if [ "$CFG_CUPS" = "no" ]; then
CUY=" "
CUN="*"
else
CUY="*"
CUN=" "
fi
if [ "$CFG_ICONV" = "no" ]; then
CIY=" "
CIN="*"
else
CIY="*"
CIN=" "
fi
if [ "$CFG_LARGEFILE" = "no" ]; then
LFSY=" "
LFSN="*"
else
LFSY="*"
LFSN=" "
fi
if [ "$CFG_STL" = "auto" ] || [ "$CFG_STL" = "yes" ]; then
SHY="*"
SHN=" "
else
SHY=" "
SHN="*"
fi
if [ "$CFG_PRECOMPILE" = "auto" ] || [ "$CFG_PRECOMPILE" = "no" ]; then
PHY=" "
PHN="*"
else
PHY="*"
PHN=" "
fi
if [ "$CFG_XCB" = "no" ]; then
XCBY=" "
XCBN="*"
else
XCBY="*"
XCBN=" "
fi
if [ "$CFG_EGLFS" = "no" ]; then
EGLFSY=" "
EGLFSN="*"
else
EGLFSY="*"
EGLFSN=" "
fi
if [ "$CFG_XINPUT2" = "no" ]; then
X2Y=" "
X2N="*"
else
X2Y="*"
X2N=" "
fi
if [ "$CFG_DBUS" = "no" ]; then
DBY=" "
DBN="+"
else
DBY="+"
DBN=" "
fi
if [ "$CFG_SEPARATE_DEBUG_INFO" = "auto" ]; then
if [ "$QT_CROSS_COMPILE" = "yes" ]; then
SBY=""
SBN="*"
else
SBY="*"
SBN=" "
fi
elif [ "$CFG_SEPARATE_DEBUG_INFO" = "yes" ]; then
SBY="*"
SBN=" "
else
SBY=" "
SBN="*"
fi
if [ "$CFG_GLIB" = "no" ]; then
GBY=" "
GBN="+"
else
GBY="+"
GBN=" "
fi
cat <<EOF
Usage: $relconf [-h] [-prefix <dir>] [-prefix-install] [-bindir <dir>] [-libdir <dir>]
[-docdir <dir>] [-headerdir <dir>] [-plugindir <dir> ] [-importdir <dir>] [-datadir <dir>]
[-translationdir <dir>] [-sysconfdir <dir>] [-examplesdir <dir>] [-testsdir <dir>]
[-release] [-debug] [-debug-and-release]
[-developer-build] [-shared] [-static] [-no-fast] [-fast] [-no-largefile]
[-largefile] [-no-exceptions] [-exceptions] [-no-accessibility]
[-accessibility] [-no-stl] [-stl] [-no-sql-<driver>] [-sql-<driver>]
[-plugin-sql-<driver>] [-system-sqlite]
[-platform] [-D <string>] [-I <string>] [-L <string>] [-help]
[-qt-zlib] [-system-zlib] [-no-gif] [-no-libpng] [-qt-libpng] [-system-libpng]
[-no-libjpeg] [-qt-libjpeg] [-system-libjpeg] [-make <part>]
[-nomake <part>] [-R <string>] [-l <string>] [-no-rpath] [-rpath] [-continue]
[-verbose] [-v] [-silent] [-no-nis] [-nis] [-no-cups] [-cups] [-no-iconv]
[-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked] [-no-gui]
[-no-separate-debug-info] [-no-mmx] [-no-3dnow] [-no-sse] [-no-sse2]
[-no-sse3] [-no-ssse3] [-no-sse4.1] [-no-sse4.2] [-no-avx] [-no-neon]
[-qtnamespace <namespace>] [-qtlibinfix <infix>] [-separate-debug-info]
[-no-phonon-backend] [-phonon-backend] [-no-media-backend] [-media-backend]
[-no-audio-backend] [-audio-backend]
[-no-javascript-jit] [-javascript-jit] [-no-declarative-debug] [-declarative-debug]
[-no-optimized-qmake] [-optimized-qmake]
[-no-openssl] [-openssl] [-openssl-linked]
[-no-gtkstyle] [-gtkstyle]
[-qt-pcre] [-system-pcre]
[-device <name>] [-device-option <key=value>]
[additional platform specific options (see below)]
Installation options:
These are optional, but you may specify install directories.
-prefix <dir> ...... This will install everything relative to <dir>
(default $QT_INSTALL_PREFIX)
-hostprefix [dir] .. Tools and libraries needed when developing
applications are installed in [dir]. If [dir] is
not given, the current build directory will be used.
(default PREFIX)
* -prefix-install .... Force a sandboxed "local" installation of
Qt. This will install into
$QT_INSTALL_PREFIX, if this option is
disabled then some platforms will attempt a
"system" install by placing default values to
be placed in a system location other than
PREFIX.
You may use these to separate different parts of the install:
-bindir <dir> ......... Executables will be installed to <dir>
(default PREFIX/bin)
-libdir <dir> ......... Libraries will be installed to <dir>
(default PREFIX/lib)
-docdir <dir> ......... Documentation will be installed to <dir>
(default PREFIX/doc)
-headerdir <dir> ...... Headers will be installed to <dir>
(default PREFIX/include)
-plugindir <dir> ...... Plugins will be installed to <dir>
(default PREFIX/plugins)
-importdir <dir> ...... Imports for QML will be installed to <dir>
(default PREFIX/imports)
-datadir <dir> ........ Data used by Qt programs will be installed to <dir>
(default PREFIX)
-translationdir <dir> . Translations of Qt programs will be installed to <dir>
(default PREFIX/translations)
-sysconfdir <dir> ..... Settings used by Qt programs will be looked for in <dir>
(default PREFIX/etc/settings)
-examplesdir <dir> .... Examples will be installed to <dir>
(default PREFIX/examples)
-testsdir <dir> ....... Tests will be installed to <dir>
(default PREFIX/tests)
-hostbindir <dir> .. Host executables will be installed to <dir>
(default HOSTPREFIX/bin)
-hostdatadir <dir> . Data used by qmake will be installed to <dir>
(default HOSTPREFIX)
Configure options:
The defaults (*) are usually acceptable. A plus (+) denotes a default value
that needs to be evaluated. If the evaluation succeeds, the feature is
included. Here is a short explanation of each option:
* -release ........... Compile and link Qt with debugging turned off.
-debug ............. Compile and link Qt with debugging turned on.
-debug-and-release . Compile and link two versions of Qt, with and without
debugging turned on (Mac only).
-developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting)
-opensource ........ Compile and link the Open-Source Edition of Qt.
-commercial ........ Compile and link the Commercial Edition of Qt.
* -shared ............ Create and use shared Qt libraries.
-static ............ Create and use static Qt libraries.
* -no-fast ........... Configure Qt normally by generating Makefiles for all
project files.
-fast .............. Configure Qt quickly by generating Makefiles only for
library and subdirectory targets. All other Makefiles
are created as wrappers, which will in turn run qmake.
-no-largefile ...... Disables large file support.
+ -largefile ......... Enables Qt to access files larger than 4 GB.
-no-exceptions ..... Disable exceptions on compilers that support it.
* -exceptions ........ Enable exceptions on compilers that support it.
-no-accessibility .. Do not compile Accessibility support.
* -accessibility ..... Compile Accessibility support.
$SHN -no-stl ............ Do not compile STL support.
$SHY -stl ............... Compile STL support.
-no-sql-<driver> ... Disable SQL <driver> entirely.
-qt-sql-<driver> ... Enable a SQL <driver> in the QtSql library, by default
none are turned on.
-plugin-sql-<driver> Enable SQL <driver> as a plugin to be linked to
at run time.
Possible values for <driver>:
[ $CFG_SQL_AVAILABLE ]
-system-sqlite ..... Use sqlite from the operating system.
-no-phonon-backend.. Do not build the platform phonon plugin.
+ -phonon-backend..... Build the platform phonon plugin.
-no-javascript-jit . Do not build the JavaScriptCore JIT compiler.
+ -javascript-jit .... Build the JavaScriptCore JIT compiler.
-no-declarative-debug ..... Do not build the declarative debugging support.
+ -declarative-debug ....... Build the declarative debugging support.
-platform target ... The operating system and compiler you are building
on ($PLATFORM).
See the README file for a list of supported
operating systems and compilers.
-no-mmx ............ Do not compile with use of MMX instructions.
-no-3dnow .......... Do not compile with use of 3DNOW instructions.
-no-sse ............ Do not compile with use of SSE instructions.
-no-sse2 ........... Do not compile with use of SSE2 instructions.
-no-sse3 ........... Do not compile with use of SSE3 instructions.
-no-ssse3 .......... Do not compile with use of SSSE3 instructions.
-no-sse4.1.......... Do not compile with use of SSE4.1 instructions.
-no-sse4.2.......... Do not compile with use of SSE4.2 instructions.
-no-avx ............ Do not compile with use of AVX instructions.
-no-neon ........... Do not compile with use of NEON instructions.
-no-mips_dsp ....... Do not compile with use of MIPS DSP instructions.
-no-mips_dspr2 ..... Do not compile with use of MIPS DSP rev2 instructions.
-qtnamespace <name> Wraps all Qt library code in 'namespace <name> {...}'.
-qtlibinfix <infix> Renames all libQt*.so to libQt*<infix>.so.
-testcocoon Instrument Qt with the TestCocoon code coverage tool.
-D <string> ........ Add an explicit define to the preprocessor.
-I <string> ........ Add an explicit include path.
-L <string> ........ Add an explicit library path.
-help, -h .......... Display this information.
Third Party Libraries:
-qt-zlib ........... Use the zlib bundled with Qt.
+ -system-zlib ....... Use zlib from the operating system.
See http://www.gzip.org/zlib
-no-gif ............ Do not compile GIF reading support.
-no-libpng ......... Do not compile PNG support.
-qt-libpng ......... Use the libpng bundled with Qt.
+ -system-libpng ..... Use libpng from the operating system.
See http://www.libpng.org/pub/png
-no-libjpeg ........ Do not compile JPEG support.
-qt-libjpeg ........ Use the libjpeg bundled with Qt.
+ -system-libjpeg .... Use libjpeg from the operating system.
See http://www.ijg.org
-no-openssl ........ Do not compile support for OpenSSL.
+ -openssl ........... Enable run-time OpenSSL support.
-openssl-linked .... Enabled linked OpenSSL support.
-qt-pcre ........... Use the PCRE library bundled with Qt.
+ -system-pcre ....... Use the PCRE library from the operating system.
Additional options:
-make <part> ....... Add part to the list of parts to be built at make time.
($QT_DEFAULT_BUILD_PARTS)
-nomake <part> ..... Exclude part from the list of parts to be built.
-R <string> ........ Add an explicit runtime library path to the Qt
libraries.
-l <string> ........ Add an explicit library.
-no-rpath .......... Do not use the library install path as a runtime
library path.
+ -rpath ............. Link Qt libraries and executables using the library
install path as a runtime library path. Equivalent
to -R install_libpath
-continue .......... Continue as far as possible if an error occurs.
-verbose, -v ....... Print verbose information about each step of the
configure process.
-silent ............ Reduce the build output so that warnings and errors
can be seen more easily.
* -no-optimized-qmake ... Do not build qmake optimized.
-optimized-qmake ...... Build qmake optimized.
-no-gui ............ Don't build the Qt GUI library
$NSN -no-nis ............ Do not compile NIS support.
$NSY -nis ............... Compile NIS support.
$CUN -no-cups ........... Do not compile CUPS support.
$CUY -cups .............. Compile CUPS support.
Requires cups/cups.h and libcups.so.2.
$CIN -no-iconv .......... Do not compile support for iconv(3).
$CIY -iconv ............. Compile support for iconv(3).
$PHN -no-pch ............ Do not use precompiled header support.
$PHY -pch ............... Use precompiled header support.
$DBN -no-dbus ........... Do not compile the QtDBus module.
$DBY -dbus .............. Compile the QtDBus module and dynamically load libdbus-1.
-dbus-linked ....... Compile the QtDBus module and link to libdbus-1.
-reduce-relocations ..... Reduce relocations in the libraries through extra
linker optimizations (Qt/X11 and Qt for Embedded Linux only;
experimental; needs GNU ld >= 2.18).
-force-asserts ........ Force Q_ASSERT to be enabled even in release builds.
-device <name> ............... Cross-compile for device <name> (experimental)
-device-option <key=value> ... Add device specific options for the device mkspec
(experimental)
$SBN -no-separate-debug-info . Do not store debug information in a separate file.
$SBY -separate-debug-info .... Strip debug information into a separate .debug file.
$XCBN -no-xcb ............ Do not compile Xcb (X protocol C-language Binding) support.
$XCBY -xcb ............... Compile Xcb support.
$EGLFSN -no-eglfs .......... Do not compile EGLFS (EGL Full Screen/Single Surface) support.
$EGLFSY -eglfs ............. Compile EGLFS support.
-xplatform target ... The target platform when cross-compiling.
-sysroot <dir> ...... Sets <dir> as the target compiler's and qmake's sysroot.
-no-feature-<feature> Do not compile in <feature>.
-feature-<feature> .. Compile in <feature>. The available features
are described in src/corelib/global/qfeatures.txt
-no-freetype ........ Do not compile in Freetype2 support.
-qt-freetype ........ Use the libfreetype bundled with Qt.
* -system-freetype .... Use libfreetype from the operating system.
See http://www.freetype.org/
-qconfig local ...... Use src/corelib/global/qconfig-local.h rather than the
default ($CFG_QCONFIG).
-no-opengl .......... Do not support OpenGL.
-opengl <api> ....... Enable OpenGL support
With no parameter, this will attempt to auto-detect
OpenGL ES 2, or regular desktop OpenGL.
Use es2 for <api> to override auto-detection.
$GBN -no-glib ........... Do not compile Glib support.
$GBY -glib .............. Compile Glib support.
EOF
if [ "$XPLATFORM_MAEMO" = "yes" ]; then
cat << EOF
$X2N -no-xinput2......... Do not compile XInput2 support.
$X2Y -xinput2............ Compile XInput2 support.
EOF
fi
if [ "$BUILD_ON_MAC" = "yes" ]; then
cat << EOF
Qt/Mac only:
-Fstring ........... Add an explicit framework path.
-fw string ......... Add an explicit framework.
* -framework ......... Build Qt as a series of frameworks and
link tools against those frameworks.
-no-framework ...... Do not build Qt as a series of frameworks.
* -dwarf2 ............ Enable dwarf2 debugging symbols.
-no-dwarf2 ......... Disable dwarf2 debugging symbols.
-sdk <sdk> ......... Build Qt using Apple provided SDK <sdk>. This option requires gcc 4.
To use a different SDK with gcc 3.3, set the SDKROOT environment variable.
-harfbuzz .......... Use HarfBuzz to do text layout instead of Core Text when possible.
* -no-harfbuzz ....... Disable HarfBuzz on Mac. It can still be enabled by setting
QT_ENABLE_HARFBUZZ environment variable.
EOF
fi
[ "x$ERROR" = "xyes" ] && exit 1
exit 0
fi # Help
# -----------------------------------------------------------------------------
# LICENSING, INTERACTIVE PART
# -----------------------------------------------------------------------------
echo
echo "This is the Qt ${EditionString} Edition."
echo
if [ "$Edition" = "OpenSource" ]; then
while true; do
echo "You are licensed to use this software under the terms of"
echo "the Lesser GNU General Public License (LGPL) versions 2.1."
if [ -f "$relpath/LICENSE.GPL3" ]; then
echo "You are also licensed to use this software under the terms of"
echo "the GNU General Public License (GPL) versions 3."
affix="either"
else
affix="the"
fi
echo
if [ "$OPT_CONFIRM_LICENSE" = "yes" ]; then
echo "You have already accepted the terms of the $LicenseType license."
acceptance=yes
else
if [ -f "$relpath/LICENSE.GPL3" ]; then
echo "Type '3' to view the GNU General Public License version 3."
fi
echo "Type 'L' to view the Lesser GNU General Public License version 2.1."
echo "Type 'yes' to accept this license offer."
echo "Type 'no' to decline this license offer."
echo
echo $ECHO_N "Do you accept the terms of $affix license? $ECHO_C"
read acceptance
fi
echo
if [ "$acceptance" = "yes" ] || [ "$acceptance" = "y" ]; then
break
elif [ "$acceptance" = "no" ]; then
echo "You are not licensed to use this software."
echo
exit 1
elif [ "$acceptance" = "3" ]; then
more "$relpath/LICENSE.GPL3"
elif [ "$acceptance" = "L" ]; then
more "$relpath/LICENSE.LGPL"
fi
done
elif [ "$Edition" = "Preview" ]; then
TheLicense=`head -n 1 "$relpath/LICENSE.PREVIEW.COMMERCIAL"`
while true; do
if [ "$OPT_CONFIRM_LICENSE" = "yes" ]; then
echo "You have already accepted the terms of the $LicenseType license."
acceptance=yes
else
echo "You are licensed to use this software under the terms of"
echo "the $TheLicense"
echo
echo "Type '?' to read the Preview License."
echo "Type 'yes' to accept this license offer."
echo "Type 'no' to decline this license offer."
echo
echo $ECHO_N "Do you accept the terms of the license? $ECHO_C"
read acceptance
fi
echo
if [ "$acceptance" = "yes" ]; then
break
elif [ "$acceptance" = "no" ] ;then
echo "You are not licensed to use this software."
echo
exit 0
elif [ "$acceptance" = "?" ]; then
more "$relpath/LICENSE.PREVIEW.COMMERCIAL"
fi
done
elif [ "$Edition" != "OpenSource" ]; then
if [ -n "$ExpiryDate" ]; then
ExpiryDate=`echo $ExpiryDate | sed -e "s,-,,g" | tr -d "\n\r"`
[ -z "$ExpiryDate" ] && ExpiryDate="0"
Today=`date +%Y%m%d`
if [ "$Today" -gt "$ExpiryDate" ]; then
case "$LicenseType" in
Commercial|Academic|Educational)
if [ "$QT_PACKAGEDATE" -gt "$ExpiryDate" ]; then
echo
echo "NOTICE NOTICE NOTICE NOTICE"
echo
echo " Your support and upgrade period has expired."
echo
echo " You are no longer licensed to use this version of Qt."
echo " Please contact qt-info@nokia.com to renew your support"
echo " and upgrades for this license."
echo
echo "NOTICE NOTICE NOTICE NOTICE"
echo
exit 1
else
echo
echo "WARNING WARNING WARNING WARNING"
echo
echo " Your support and upgrade period has expired."
echo
echo " You may continue to use your last licensed release"
echo " of Qt under the terms of your existing license"
echo " agreement. But you are not entitled to technical"
echo " support, nor are you entitled to use any more recent"
echo " Qt releases."
echo
echo " Please contact qt-info@nokia.com to renew your"
echo " support and upgrades for this license."
echo
echo "WARNING WARNING WARNING WARNING"
echo
sleep 3
fi
;;
Evaluation|*)
echo
echo "NOTICE NOTICE NOTICE NOTICE"
echo
echo " Your Evaluation license has expired."
echo
echo " You are no longer licensed to use this software. Please"
echo " contact qt-info@nokia.com to purchase license, or install"
echo " the Qt Open Source Edition if you intend to develop free"
echo " software."
echo
echo "NOTICE NOTICE NOTICE NOTICE"
echo
exit 1
;;
esac
fi
fi
TheLicense=`head -n 1 "$outpath/LICENSE"`
while true; do
if [ "$OPT_CONFIRM_LICENSE" = "yes" ]; then
echo "You have already accepted the terms of the $TheLicense."
acceptance=yes
else
echo "You are licensed to use this software under the terms of"
echo "the $TheLicense."
echo
echo "Type '?' to view the $TheLicense."
echo "Type 'yes' to accept this license offer."
echo "Type 'no' to decline this license offer."
echo
echo $ECHO_N "Do you accept the terms of the $TheLicense? $ECHO_C"
read acceptance
fi
echo
if [ "$acceptance" = "yes" ]; then
break
elif [ "$acceptance" = "no" ]; then
echo "You are not licensed to use this software."
echo
exit 1
else [ "$acceptance" = "?" ]
more "$outpath/LICENSE"
fi
done
fi
# this should be moved somewhere else
case "$PLATFORM" in
aix-*)
AIX_VERSION=`uname -v`
if [ "$AIX_VERSION" -lt "5" ]; then
QMakeVar add QMAKE_LIBS_X11 -lbind
fi
;;
*)
;;
esac
#-------------------------------------------------------------------------------
# generate qconfig.cpp
#-------------------------------------------------------------------------------
[ -d "$outpath/src/corelib/global" ] || mkdir -p "$outpath/src/corelib/global"
cat > "$outpath/src/corelib/global/qconfig.cpp.new" <<EOF
/* License Info */
static const char qt_configure_licensee_str [256 + 12] = "qt_lcnsuser=$Licensee";
static const char qt_configure_licensed_products_str [256 + 12] = "qt_lcnsprod=$Edition";
/* Installation date */
static const char qt_configure_installation [12+11] = "qt_instdate=`date +%Y-%m-%d`";
/* Installation Info */
static const char qt_configure_prefix_path_strs[][256 + 12] = {
"qt_prfxpath=$QT_INSTALL_PREFIX",
"qt_docspath=$QT_INSTALL_DOCS",
"qt_hdrspath=$QT_INSTALL_HEADERS",
"qt_libspath=$QT_INSTALL_LIBS",
"qt_binspath=$QT_INSTALL_BINS",
"qt_plugpath=$QT_INSTALL_PLUGINS",
"qt_impspath=$QT_INSTALL_IMPORTS",
"qt_datapath=$QT_INSTALL_DATA",
"qt_trnspath=$QT_INSTALL_TRANSLATIONS",
"qt_xmplpath=$QT_INSTALL_EXAMPLES",
"qt_tstspath=$QT_INSTALL_TESTS",
#ifdef QT_BUILD_QMAKE
"qt_ssrtpath=$CFG_SYSROOT",
"qt_hpfxpath=$QT_HOST_PREFIX",
"qt_hbinpath=$QT_HOST_BINS",
"qt_hdatpath=$QT_HOST_DATA",
#endif
};
static const char qt_configure_settings_path_str[256 + 12] = "qt_stngpath=$QT_INSTALL_SETTINGS";
EOF
cat >> "$outpath/src/corelib/global/qconfig.cpp.new" <<EOF
/* strlen( "qt_lcnsxxxx" ) == 12 */
#define QT_CONFIGURE_LICENSEE qt_configure_licensee_str + 12;
#define QT_CONFIGURE_LICENSED_PRODUCTS qt_configure_licensed_products_str + 12;
#define QT_CONFIGURE_SETTINGS_PATH qt_configure_settings_path_str + 12;
EOF
# avoid unecessary rebuilds by copying only if qconfig.cpp has changed
if cmp -s "$outpath/src/corelib/global/qconfig.cpp" "$outpath/src/corelib/global/qconfig.cpp.new"; then
rm -f "$outpath/src/corelib/global/qconfig.cpp.new"
else
[ -f "$outpath/src/corelib/global/qconfig.cpp" ] && chmod +w "$outpath/src/corelib/global/qconfig.cpp"
mv "$outpath/src/corelib/global/qconfig.cpp.new" "$outpath/src/corelib/global/qconfig.cpp"
chmod -w "$outpath/src/corelib/global/qconfig.cpp"
fi
# -----------------------------------------------------------------------------
if [ "$LicenseType" = "Evaluation" ]; then
EVALKEY=qt_qevalkey=$LicenseKeyExt
elif echo "$D_FLAGS" | grep QT_EVAL >/dev/null 2>&1; then
EVALKEY=qt_qevalkey=
fi
if [ -n "$EVALKEY" ]; then
rm -f "$outpath/src/corelib/global/qconfig_eval.cpp"
cat > "$outpath/src/corelib/global/qconfig_eval.cpp" <<EOF
/* Evaluation license key */
static const volatile char qt_eval_key_data [512 + 12] = "$EVALKEY";
EOF
chmod -w "$outpath/src/corelib/global/qconfig_eval.cpp"
fi
# -----------------------------------------------------------------------------
# build qmake
# -----------------------------------------------------------------------------
# symlink includes
if [ -n "$PERL" ] && [ -x "$relpath/bin/syncqt" ]; then
SYNCQT_OPTS=
[ "$CFG_DEV" = "yes" ] && SYNCQT_OPTS="$SYNCQT_OPTS -check-includes"
if [ "$OPT_SHADOW" = "yes" ]; then
"$outpath/bin/syncqt" $SYNCQT_OPTS "$relpath" || exit 1
elif [ "$CFG_DEV" = "yes" ] || [ ! -d $relpath/include ] || [ -d $relpath/.git ]; then
QTDIR="$relpath" perl "$outpath/bin/syncqt" $SYNCQT_OPTS || exit 1
fi
fi
# $1: input variable name (awk regexp)
# $2: optional output variable name
# $3: optional value transformation (sed command)
# relies on $QMAKESPEC, $COMPILER_CONF and $mkfile being set correctly, as the latter
# is where the resulting variable is written to
setBootstrapVariable()
{
getQMakeConf "$1" | echo ${2-$1} = `if [ -n "$3" ]; then sed "$3"; else cat; fi` >> "$mkfile"
}
# build qmake
if true; then ###[ '!' -f "$outpath/bin/qmake" ];
echo "Creating qmake. Please wait..."
OLD_QCONFIG_H=
QCONFIG_H="$outpath/src/corelib/global/qconfig.h"
QMAKE_QCONFIG_H="${QCONFIG_H}.qmake"
if [ -f "$QCONFIG_H" ]; then
OLD_QCONFIG_H=$QCONFIG_H
mv -f "$OLD_QCONFIG_H" "${OLD_QCONFIG_H}.old"
fi
# create temporary qconfig.h for compiling qmake, if it doesn't exist
# when building qmake, we use #defines for the install paths,
# however they are real functions in the library
if [ '!' -f "$QMAKE_QCONFIG_H" ]; then
mkdir -p "$outpath/src/corelib/global"
[ -f "$QCONFIG_H" ] && chmod +w "$QCONFIG_H"
echo "/* All features enabled while building qmake */" >"$QMAKE_QCONFIG_H"
fi
mv -f "$QMAKE_QCONFIG_H" "$QCONFIG_H"
#mkspecs/default is used as a (gasp!) default mkspec so QMAKESPEC needn't be set once configured
rm -rf mkspecs/default
ln -s `echo $XQMAKESPEC | sed "s,^${relpath}/mkspecs/,,"` mkspecs/default
mkdir -p "$outpath/qmake" || exit
# fix makefiles
for mkfile in GNUmakefile Makefile; do
EXTRA_LFLAGS=
EXTRA_CFLAGS=
in_mkfile="${mkfile}.in"
if [ "$mkfile" = "Makefile" ]; then
# if which qmake >/dev/null 2>&1 && [ -f qmake/qmake.pro ]; then
# (cd qmake && qmake) >/dev/null 2>&1 && continue
# fi
in_mkfile="${mkfile}.unix"
fi
in_mkfile="$relpath/qmake/$in_mkfile"
mkfile="$outpath/qmake/$mkfile"
if [ -f "$mkfile" ]; then
[ "$CFG_DEV" = "yes" ] && "$WHICH" chflags >/dev/null 2>&1 && chflags nouchg "$mkfile"
rm -f "$mkfile"
fi
[ -f "$in_mkfile" ] || continue
echo "########################################################################" > "$mkfile"
echo "## This file was autogenerated by configure, all changes will be lost ##" >> "$mkfile"
echo "########################################################################" >> "$mkfile"
EXTRA_OBJS=
EXTRA_SRCS=
EXTRA_CFLAGS="\$(QMAKE_CFLAGS)"
EXTRA_CXXFLAGS="\$(QMAKE_CXXFLAGS)"
EXTRA_LFLAGS="\$(QMAKE_LFLAGS)"
if [ "$PLATFORM" = "irix-cc" ] || [ "$PLATFORM" = "irix-cc-64" ]; then
EXTRA_LFLAGS="$EXTRA_LFLAGS -lm"
fi
[ "$CFG_SILENT" = "yes" ] && CC_TRANSFORM='s,^,\@,' || CC_TRANSFORM=
setBootstrapVariable QMAKE_CC CC "$CC_TRANSFORM"
setBootstrapVariable QMAKE_CXX CXX "$CC_TRANSFORM"
setBootstrapVariable QMAKE_CFLAGS
setBootstrapVariable QMAKE_CXXFLAGS
setBootstrapVariable QMAKE_LFLAGS
if [ $QT_EDITION = "QT_EDITION_OPENSOURCE" ]; then
EXTRA_CFLAGS="$EXTRA_CFLAGS -DQMAKE_OPENSOURCE_EDITION"
EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS -DQMAKE_OPENSOURCE_EDITION"
fi
if [ "$CFG_RELEASE_QMAKE" = "yes" ]; then
setBootstrapVariable QMAKE_CFLAGS_RELEASE
setBootstrapVariable QMAKE_CXXFLAGS_RELEASE
EXTRA_CFLAGS="$EXTRA_CFLAGS \$(QMAKE_CFLAGS_RELEASE)"
EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(QMAKE_CXXFLAGS_RELEASE)"
elif [ "$CFG_DEBUG" = "yes" ]; then
setBootstrapVariable QMAKE_CFLAGS_DEBUG
setBootstrapVariable QMAKE_CXXFLAGS_DEBUG
EXTRA_CFLAGS="$EXTRA_CFLAGS \$(QMAKE_CFLAGS_DEBUG)"
EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(QMAKE_CXXFLAGS_DEBUG)"
fi
if [ -n "$RPATH_FLAGS" ] && [ -n "`getQMakeConf 'QMAKE_(LFLAGS_)?RPATH'`" ]; then
setBootstrapVariable "QMAKE_(LFLAGS_)?RPATH" QMAKE_LFLAGS_RPATH
for rpath in $RPATH_FLAGS; do
EXTRA_LFLAGS="\$(QMAKE_LFLAGS_RPATH)\"$rpath\" $EXTRA_LFLAGS"
done
fi
if [ "$BUILD_ON_MAC" = "yes" ]; then
echo "export MACOSX_DEPLOYMENT_TARGET = 10.6" >> "$mkfile"
echo "CARBON_LFLAGS =-framework ApplicationServices" >>"$mkfile"
echo "CARBON_CFLAGS =-fconstant-cfstrings" >>"$mkfile"
EXTRA_LFLAGS="$EXTRA_LFLAGS \$(CARBON_LFLAGS)"
EXTRA_CFLAGS="$EXTRA_CFLAGS \$(CARBON_CFLAGS)"
EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(CARBON_CFLAGS)"
EXTRA_OBJS="qsettings_mac.o qcore_mac.o"
EXTRA_SRCS="\"$relpath/src/corelib/io/qsettings_mac.cpp\" \"$relpath/src/corelib/kernel/qcore_mac.cpp\""
if [ '!' -z "$CFG_SDK" ]; then
echo "SDK_LFLAGS =-Wl,-syslibroot,$CFG_SDK" >>"$mkfile"
echo "SDK_CFLAGS =-isysroot $CFG_SDK" >>"$mkfile"
EXTRA_CFLAGS="$EXTRA_CFLAGS \$(SDK_CFLAGS)"
EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS \$(SDK_CFLAGS)"
EXTRA_LFLAGS="$EXTRA_LFLAGS \$(SDK_LFLAGS)"
fi
fi
if [ '!' -z "$D_FLAGS" ]; then
for DEF in $D_FLAGS; do
EXTRA_CFLAGS="$EXTRA_CFLAGS \"-D${DEF}\""
done
fi
QMAKE_BIN_DIR="$QT_INSTALL_BINS"
[ -z "$QMAKE_BIN_DIR" ] && QMAKE_BIN_DIR="${QT_INSTALL_PREFIX}/bin"
QMAKE_DATA_DIR="$QT_INSTALL_DATA"
[ -z "$QMAKE_DATA_DIR" ] && QMAKE_DATA_DIR="${QT_INSTALL_PREFIX}"
echo >>"$mkfile"
adjrelpath=`echo "$relpath" | sed 's/ /\\\\\\\\ /g'`
adjoutpath=`echo "$outpath" | sed 's/ /\\\\\\\\ /g'`
adjqmakespec=`echo "$QMAKESPEC" | sed 's/ /\\\\\\\\ /g'`
sed -e "s,@SOURCE_PATH@,$adjrelpath,g" -e "s,@BUILD_PATH@,$adjoutpath,g" \
-e "s,@QMAKE_CFLAGS@,$EXTRA_CFLAGS,g" -e "s,@QMAKE_LFLAGS@,$EXTRA_LFLAGS,g" \
-e "s,@QMAKE_CXXFLAGS@,$EXTRA_CXXFLAGS,g" \
-e "s,@QT_INSTALL_BINS@,\$(INSTALL_ROOT)$QMAKE_BIN_DIR,g" \
-e "s,@QT_INSTALL_DATA@,\$(INSTALL_ROOT)$QMAKE_DATA_DIR,g" \
-e "s,@QMAKE_QTOBJS@,$EXTRA_OBJS,g" -e "s,@QMAKE_QTSRCS@,$EXTRA_SRCS,g" \
-e "s,@QMAKESPEC@,$adjqmakespec,g" -e "s,@QT_VERSION@,$QT_VERSION,g" "$in_mkfile" >>"$mkfile"
if "$WHICH" makedepend >/dev/null 2>&1 && grep 'depend:' "$mkfile" >/dev/null 2>&1; then
(cd "$outpath/qmake" && "$MAKE" -f "$mkfile" depend) >/dev/null 2>&1
sed "s,^.*/\([^/]*.o\):,\1:,g" "$mkfile" >"$mkfile.tmp"
sed "s,$outpath,$adjoutpath,g" "$mkfile.tmp" >"$mkfile"
rm "$mkfile.tmp"
fi
done
QMAKE_BUILD_ERROR=no
(cd "$outpath/qmake"; "$MAKE") || QMAKE_BUILD_ERROR=yes
[ '!' -z "$QCONFIG_H" ] && mv -f "$QCONFIG_H" "$QMAKE_QCONFIG_H" #move qmake's qconfig.h to qconfig.h.qmake
[ '!' -z "$OLD_QCONFIG_H" ] && mv -f "${OLD_QCONFIG_H}.old" "$OLD_QCONFIG_H" #put back qconfig.h
[ "$QMAKE_BUILD_ERROR" = "yes" ] && exit 2
fi # Build qmake
#-------------------------------------------------------------------------------
# tests that need qmake
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# determine the target and host architectures
#-------------------------------------------------------------------------------
# Use config.tests/arch/arch.pro to has the compiler tell us what the target architecture is
CFG_ARCH=`OUTDIR="$outpath" "$outpath/bin/qmake" -spec "$XQMAKESPEC" -o /dev/null "$relpath/config.tests/arch/arch.pro" 2>&1 | sed -n -e 's,^Project MESSAGE:.*Architecture: \([a-zA-Z0-9_]*\).*,\1,p'`
[ -z "$CFG_ARCH" ] && CFG_ARCH="unknown"
if [ "$QMAKESPEC" != "$XQMAKESPEC" ]; then
# Do the same test again, using the host compiler
CFG_HOST_ARCH=`OUTDIR="$outpath" "$outpath/bin/qmake" -spec "$QMAKESPEC" -o /dev/null "$relpath/config.tests/arch/arch.pro" 2>&1 | sed -n -e 's,^Project MESSAGE:.*Architecture: \([a-zA-Z0-9_]*\).*,\1,p'`
[ -z "$CFG_HOST_ARCH" ] && CFG_HOST_ARCH="unknown"
else
# not cross compiling, host == target
CFG_HOST_ARCH="$CFG_ARCH"
fi
if [ "$OPT_VERBOSE" = "yes" ]; then
echo "System architecture: '$CFG_ARCH'"
echo "Host architecture: '$CFG_HOST_ARCH'"
fi
#-------------------------------------------------------------------------------
# functionality tests
#-------------------------------------------------------------------------------
# detect availability of float math.h functions
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/floatmath "floatmath" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_USE_FLOATMATH=yes
else
CFG_USE_FLOATMATH=no
fi
# detect mmx support
if [ "${CFG_MMX}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mmx "mmx" $L_FLAGS $I_FLAGS $l_FLAGS "-mmmx"; then
CFG_MMX=yes
else
CFG_MMX=no
fi
fi
# detect 3dnow support
if [ "${CFG_3DNOW}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/3dnow "3dnow" $L_FLAGS $I_FLAGS $l_FLAGS "-m3dnow"; then
CFG_3DNOW=yes
else
CFG_3DNOW=no
fi
fi
# detect sse support
if [ "${CFG_SSE}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse "sse" $L_FLAGS $I_FLAGS $l_FLAGS "-msse"; then
CFG_SSE=yes
else
CFG_SSE=no
fi
fi
# detect sse2 support
if [ "${CFG_SSE2}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse2 "sse2" $L_FLAGS $I_FLAGS $l_FLAGS "-msse2"; then
CFG_SSE2=yes
else
CFG_SSE2=no
fi
fi
# detect sse3 support
if [ "${CFG_SSE3}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse3 "sse3" $L_FLAGS $I_FLAGS $l_FLAGS "-msse3"; then
CFG_SSE3=yes
else
CFG_SSE3=no
fi
fi
# detect ssse3 support
if [ "${CFG_SSSE3}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/ssse3 "ssse3" $L_FLAGS $I_FLAGS $l_FLAGS "-mssse3"; then
CFG_SSSE3=yes
else
CFG_SSSE3=no
fi
fi
# detect sse4.1 support
if [ "${CFG_SSE4_1}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse4_1 "sse4_1" $L_FLAGS $I_FLAGS $l_FLAGS "-msse4.1"; then
CFG_SSE4_1=yes
else
CFG_SSE4_1=no
fi
fi
# detect sse4.2 support
if [ "${CFG_SSE4_2}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse4_2 "sse4_2" $L_FLAGS $I_FLAGS $l_FLAGS "-msse4.2"; then
CFG_SSE4_2=yes
else
CFG_SSE4_2=no
fi
fi
# detect avx support
if [ "${CFG_AVX}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/avx "avx" $L_FLAGS $I_FLAGS $l_FLAGS "-mavx"; then
CFG_AVX=yes
else
CFG_AVX=no
fi
fi
# check iWMMXt support
if [ "$CFG_IWMMXT" = "yes" ]; then
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/iwmmxt "iwmmxt" $L_FLAGS $I_FLAGS $l_FLAGS "-mcpu=iwmmxt"
if [ $? != "0" ]; then
echo "The iWMMXt functionality test failed!"
echo " Please make sure your compiler supports iWMMXt intrinsics!"
exit 1
fi
fi
# detect neon support
if [ "$CFG_ARCH" = "arm" ] && [ "${CFG_NEON}" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/neon "neon" $L_FLAGS $I_FLAGS $l_FLAGS "-mfpu=neon"; then
CFG_NEON=yes
else
CFG_NEON=no
fi
elif [ "$CFG_ARCH" != "arm" ]; then
CFG_NEON=no
fi
# detect mips_dsp support
if [ "${CFG_ARCH}" = "mips" ] && [ "${CFG_MIPS_DSP}" = "yes" ]; then
CFG_MIPS_DSP=yes
else
CFG_MIPS_DSP=no
fi
# detect mips_dspr2 support
if [ "${CFG_ARCH}" = "mips" ] && [ "${CFG_MIPS_DSPR2}" = "yes" ]; then
CFG_MIPS_DSPR2=yes
else
CFG_MIPS_DSPR2=no
fi
[ "$XPLATFORM_MINGW" = "yes" ] && QMakeVar add styles "windowsxp windowsvista"
# detect zlib
if [ "$CFG_ZLIB" = "no" ]; then
# Note: Qt no longer support builds without zlib
# So we force a "no" to be "auto" here.
# If you REALLY really need no zlib support, you can still disable
# it by doing the following:
# add "no-zlib" to mkspecs/qconfig.pri
# #define QT_NO_COMPRESS (probably by adding to src/corelib/global/qconfig.h)
#
# There's no guarantee that Qt will build under those conditions
CFG_ZLIB=auto
ZLIB_FORCED=yes
fi
if [ "$CFG_ZLIB" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/zlib "zlib" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_ZLIB=system
else
CFG_ZLIB=yes
fi
fi
if [ "$CFG_LARGEFILE" = "auto" ]; then
#Large files should be enabled for all Linux systems
CFG_LARGEFILE=yes
fi
if [ "$CFG_GUI" = "no" ]; then
QPA_PLATFORM_GUARD=no
fi
# detect how jpeg should be built
if [ "$CFG_JPEG" = "auto" ]; then
if [ "$CFG_SHARED" = "yes" ]; then
CFG_JPEG=plugin
else
CFG_JPEG=yes
fi
fi
# detect jpeg
if [ "$CFG_LIBJPEG" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/libjpeg "libjpeg" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_LIBJPEG=system
else
CFG_LIBJPEG=qt
fi
fi
# detect how gif should be built
if [ "$CFG_GIF" = "auto" ]; then
if [ "$CFG_SHARED" = "yes" ]; then
CFG_GIF=plugin
else
CFG_GIF=yes
fi
fi
# detect png
if [ "$CFG_LIBPNG" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/libpng "libpng" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_LIBPNG=system
else
CFG_LIBPNG=qt
fi
fi
# detect accessibility
if [ "$CFG_ACCESSIBILITY" = "auto" ]; then
CFG_ACCESSIBILITY=yes
fi
if [ "$CFG_EGLFS" = "yes" ]; then
if [ "$CFG_EGL" = "no" ]; then
echo "The EGLFS plugin requires EGL support and cannot be built"
exit 101
fi
CFG_EGL=yes
fi
# auto-detect SQL-modules support
for _SQLDR in $CFG_SQL_AVAILABLE; do
case $_SQLDR in
mysql)
if [ "$CFG_SQL_mysql" != "no" ]; then
[ -z "$CFG_MYSQL_CONFIG" ] && CFG_MYSQL_CONFIG=`"$WHICH" mysql_config`
if [ -x "$CFG_MYSQL_CONFIG" ]; then
QT_CFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --include 2>/dev/null`
QT_LFLAGS_MYSQL_R=`$CFG_MYSQL_CONFIG --libs_r 2>/dev/null`
QT_LFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --libs 2>/dev/null`
QT_MYSQL_VERSION=`$CFG_MYSQL_CONFIG --version 2>/dev/null`
QT_MYSQL_VERSION_MAJOR=`echo $QT_MYSQL_VERSION | cut -d . -f 1`
fi
if [ -n "$QT_MYSQL_VERSION" ] && [ "$QT_MYSQL_VERSION_MAJOR" -lt 4 ]; then
if [ "$CFG_SQL_mysql" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "This version of MySql is not supported ($QT_MYSQL_VERSION)."
echo " You need MySql 4 or higher."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_mysql="no"
QT_LFLAGS_MYSQL=""
QT_LFLAGS_MYSQL_R=""
QT_CFLAGS_MYSQL=""
fi
else
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mysql_r "MySQL (thread-safe)" $QT_LFLAGS_MYSQL_R $L_FLAGS $QT_CFLAGS_MYSQL $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
QMakeVar add CONFIG use_libmysqlclient_r
if [ "$CFG_SQL_mysql" = "auto" ]; then
CFG_SQL_mysql=plugin
fi
QT_LFLAGS_MYSQL="$QT_LFLAGS_MYSQL_R"
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mysql "MySQL (thread-unsafe)" $QT_LFLAGS_MYSQL $L_FLAGS $QT_CFLAGS_MYSQL $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_mysql" = "auto" ]; then
CFG_SQL_mysql=plugin
fi
else
if [ "$CFG_SQL_mysql" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "MySQL support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_mysql=no
QT_LFLAGS_MYSQL=""
QT_LFLAGS_MYSQL_R=""
QT_CFLAGS_MYSQL=""
fi
fi
fi
fi
;;
psql)
if [ "$CFG_SQL_psql" != "no" ]; then
# Be careful not to use native pg_config when cross building.
if [ "$XPLATFORM_MINGW" != "yes" ] && "$WHICH" pg_config >/dev/null 2>&1; then
QT_CFLAGS_PSQL=`pg_config --includedir 2>/dev/null`
QT_LFLAGS_PSQL=`pg_config --libdir 2>/dev/null`
fi
[ -z "$QT_CFLAGS_PSQL" ] || QT_CFLAGS_PSQL="-I$QT_CFLAGS_PSQL"
[ -z "$QT_LFLAGS_PSQL" ] || QT_LFLAGS_PSQL="-L$QT_LFLAGS_PSQL"
# But, respect PSQL_LIBS if set
[ -z "$PSQL_LIBS" ] || QT_LFLAGS_PSQL="$PSQL_LIBS"
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/psql "PostgreSQL" $QT_LFLAGS_PSQL $L_FLAGS $QT_CFLAGS_PSQL $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_psql" = "auto" ]; then
CFG_SQL_psql=plugin
fi
else
if [ "$CFG_SQL_psql" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "PostgreSQL support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_psql=no
QT_CFLAGS_PSQL=""
QT_LFLAGS_PSQL=""
fi
fi
fi
;;
odbc)
if [ "$CFG_SQL_odbc" != "no" ]; then
if ( [ "$BUILD_ON_MAC" != "yes" ] || [ "$XPLATFORM_MINGW" = "yes" ] ) && "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/odbc "ODBC" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_odbc" = "auto" ]; then
CFG_SQL_odbc=plugin
fi
else
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/iodbc "iODBC" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
QT_LFLAGS_ODBC="-liodbc"
if [ "$CFG_SQL_odbc" = "auto" ]; then
CFG_SQL_odbc=plugin
fi
else
if [ "$CFG_SQL_odbc" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "ODBC support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_odbc=no
fi
fi
fi
fi
;;
oci)
if [ "$CFG_SQL_oci" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/oci "OCI" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_oci" = "auto" ]; then
CFG_SQL_oci=plugin
fi
else
if [ "$CFG_SQL_oci" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "Oracle (OCI) support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_oci=no
fi
fi
fi
;;
tds)
if [ "$CFG_SQL_tds" != "no" ]; then
[ -z "$SYBASE" ] || QT_LFLAGS_TDS="-L$SYBASE/lib"
[ -z "$SYBASE_LIBS" ] || QT_LFLAGS_TDS="$QT_LFLAGS_TDS $SYBASE_LIBS"
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/tds "TDS" $QT_LFLAGS_TDS $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_tds" = "auto" ]; then
CFG_SQL_tds=plugin
fi
else
if [ "$CFG_SQL_tds" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "TDS support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_tds=no
fi
fi
fi
;;
db2)
if [ "$CFG_SQL_db2" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/db2 "DB2" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_db2" = "auto" ]; then
CFG_SQL_db2=plugin
fi
else
if [ "$CFG_SQL_db2" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "ODBC support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_db2=no
fi
fi
fi
;;
ibase)
if [ "$CFG_SQL_ibase" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/ibase "InterBase" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_ibase" = "auto" ]; then
CFG_SQL_ibase=plugin
fi
else
if [ "$CFG_SQL_ibase" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "InterBase support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_ibase=no
fi
fi
fi
;;
sqlite2)
if [ "$CFG_SQL_sqlite2" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sqlite2 "SQLite2" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_sqlite2" = "auto" ]; then
CFG_SQL_sqlite2=plugin
fi
else
if [ "$CFG_SQL_sqlite2" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "SQLite2 support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_SQL_sqlite2=no
fi
fi
fi
;;
sqlite)
if [ "$CFG_SQL_sqlite" != "no" ]; then
SQLITE_AUTODETECT_FAILED="no"
if [ "$CFG_SQLITE" = "system" ]; then
if [ -n "$PKG_CONFIG" ]; then
QT_CFLAGS_SQLITE=`$PKG_CONFIG --cflags sqlite3 2>/dev/null`
QT_LFLAGS_SQLITE=`$PKG_CONFIG --libs sqlite3 2>/dev/null`
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sqlite "SQLite" $QT_LFLAGS_SQLITE $L_FLAGS $QT_CFLAGS_SQLITE $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_SQL_sqlite" = "auto" ]; then
CFG_SQL_sqlite=plugin
fi
QMAKE_CONFIG="$QMAKE_CONFIG system-sqlite"
else
SQLITE_AUTODETECT_FAILED="yes"
CFG_SQL_sqlite=no
fi
elif [ -f "$relpath/src/3rdparty/sqlite/sqlite3.h" ]; then
if [ "$CFG_SQL_sqlite" = "auto" ]; then
CFG_SQL_sqlite=plugin
fi
else
SQLITE_AUTODETECT_FAILED="yes"
CFG_SQL_sqlite=no
fi
if [ "$SQLITE_AUTODETECT_FAILED" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "SQLite support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
fi
fi
;;
*)
if [ "$OPT_VERBOSE" = "yes" ]; then
echo "unknown SQL driver: $_SQLDR"
fi
;;
esac
done
# auto-detect NIS support
if [ "$CFG_NIS" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/nis "NIS" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_NIS=yes
else
if [ "$CFG_NIS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "NIS support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_NIS=no
fi
fi
fi
# auto-detect CUPS support
if [ "$CFG_CUPS" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/cups "Cups" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_CUPS=yes
else
if [ "$CFG_CUPS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "Cups support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_CUPS=no
fi
fi
fi
# auto-detect iconv(3) support
if [ "$CFG_ICONV" != "no" ]; then
if [ "$XPLATFORM_MINGW" = "yes" ]; then
CFG_ICONV=no
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" "$OPT_VERBOSE" "$relpath" "$outpath" "config.tests/unix/iconv" "POSIX iconv" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_ICONV=yes
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" "$OPT_VERBOSE" "$relpath" "$outpath" "config.tests/unix/sun-libiconv" "SUN libiconv" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_ICONV=sun
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" "$OPT_VERBOSE" "$relpath" "$outpath" "config.tests/unix/gnu-libiconv" "GNU libiconv" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_ICONV=gnu
else
if [ "$CFG_ICONV" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "Iconv support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_ICONV=no
fi
fi
fi
# auto-detect libdbus-1 support
if [ "$CFG_DBUS" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --atleast-version="$MIN_DBUS_1_VERSION" dbus-1 2>/dev/null; then
QT_CFLAGS_DBUS=`$PKG_CONFIG --cflags dbus-1 2>/dev/null`
QT_LIBS_DBUS=`$PKG_CONFIG --libs dbus-1 2>/dev/null`
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/dbus "D-Bus" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_DBUS $QT_LIBS_DBUS $MAC_CONFIG_TEST_COMMANDLINE; then
[ "$CFG_DBUS" = "auto" ] && CFG_DBUS=yes
QMakeVar set QT_CFLAGS_DBUS "$QT_CFLAGS_DBUS"
QMakeVar set QT_LIBS_DBUS "$QT_LIBS_DBUS"
else
if [ "$CFG_DBUS" = "auto" ]; then
CFG_DBUS=no
elif [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# CFG_DBUS is "yes" or "linked" here
echo "The QtDBus module cannot be enabled because libdbus-1 version $MIN_DBUS_1_VERSION was not found."
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
fi
fi
fi
# auto-detect Glib support
if [ "$CFG_GLIB" != "no" ]; then
if [ -n "$PKG_CONFIG" ]; then
QT_CFLAGS_GLIB=`$PKG_CONFIG --cflags glib-2.0 gthread-2.0 2>/dev/null`
QT_LIBS_GLIB=`$PKG_CONFIG --libs glib-2.0 gthread-2.0 2>/dev/null`
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/glib "Glib" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GLIB $QT_LIBS_GLIB; then
CFG_GLIB=yes
QMakeVar set QT_CFLAGS_GLIB "$QT_CFLAGS_GLIB"
QMakeVar set QT_LIBS_GLIB "$QT_LIBS_GLIB"
else
if [ "$CFG_GLIB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "Glib support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_GLIB=no
fi
fi
fi
# ### Vestige
if [ "$CFG_GLIB" = "yes" -a "$CFG_GSTREAMER" != "no" ]; then
if [ -n "$PKG_CONFIG" ]; then
QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/gstreamer "GStreamer" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER; then
CFG_GSTREAMER=yes
QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER"
QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER"
else
if [ "$CFG_GSTREAMER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "Gstreamer support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_GSTREAMER=no
fi
fi
elif [ "$CFG_GLIB" = "no" ]; then
CFG_GSTREAMER=no
fi
# auto-detect libicu support
if [ "$CFG_ICU" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/icu "ICU" $L_FLAGS $I_FLAGS $l_FLAGS; then
[ "$CFG_ICU" = "auto" ] && CFG_ICU=yes
else
if [ "$CFG_ICU" = "auto" ]; then
CFG_ICU=no
elif [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# CFG_ICU is "yes"
echo "The ICU library support cannot be enabled."
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
fi
fi
fi
# Auto-detect PulseAudio support
if [ "$CFG_PULSEAUDIO" != "no" ]; then
if [ -n "$PKG_CONFIG" ]; then
QT_CFLAGS_PULSEAUDIO=`$PKG_CONFIG --cflags libpulse '>=' 0.9.10 libpulse-mainloop-glib 2>/dev/null`
QT_LIBS_PULSEAUDIO=`$PKG_CONFIG --libs libpulse '>=' 0.9.10 libpulse-mainloop-glib 2>/dev/null`
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/pulseaudio "PulseAudio" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_PULSEAUDIO $QT_LIBS_PULSEAUDIO; then
CFG_PULSEAUDIO=yes
QMakeVar set QT_CFLAGS_PULSEAUDIO "$QT_CFLAGS_PULSEAUDIO"
QMakeVar set QT_LIBS_PULSEAUDIO "$QT_LIBS_PULSEAUDIO"
else
if [ "$CFG_PULSEAUDIO" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "PulseAudio support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_PULSEAUDIO=no
fi
fi
fi
# X11/MINGW OpenGL
if [ "$XPLATFORM_MINGW" = "yes" ]; then
# auto-detect OpenGL support (es2 = OpenGL ES 2.x)
if [ "$CFG_GUI" = "no" ]; then
if [ "$CFG_OPENGL" = "auto" ]; then
CFG_OPENGL=no
fi
if [ "$CFG_OPENGL" != "no" ]; then
echo "OpenGL enabled, but GUI disabled."
echo " You might need to either enable the GUI or disable OpenGL"
exit 1
fi
fi
if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/opengl "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_OPENGL=desktop
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_OPENGL=es2
else
if [ "$CFG_OPENGL" = "yes" ]; then
echo "All the OpenGL functionality tests failed!"
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in"
echo " ${XQMAKESPEC}."
exit 1
fi
CFG_OPENGL=no
fi
case "$PLATFORM" in
hpux*)
# HP-UX have buggy glx headers; check if we really need to define the GLXFBConfig struct.
if [ "$CFG_OPENGL" = "desktop" ]; then
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/glxfbconfig "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
if [ $? != "0" ]; then
QMakeVar add DEFINES QT_DEFINE_GLXFBCONFIG_STRUCT
fi
fi
;;
*)
;;
esac
elif [ "$CFG_OPENGL" = "es2" ]; then
#OpenGL ES 2.x
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS
if [ $? != "0" ]; then
echo "The OpenGL ES 2.0 functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_OPENGL_ES2, QMAKE_LIBDIR_OPENGL_ES2 and QMAKE_LIBS_OPENGL_ES2 in"
echo " ${XQMAKESPEC}."
exit 1
fi
elif [ "$CFG_OPENGL" = "desktop" ]; then
# Desktop OpenGL support
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/opengl "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
if [ $? != "0" ]; then
echo "The OpenGL functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in"
echo " ${XQMAKESPEC}."
exit 1
fi
case "$PLATFORM" in
hpux*)
# HP-UX have buggy glx headers; check if we really need to define the GLXFBConfig struct.
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/glxfbconfig "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
if [ $? != "0" ]; then
QMakeVar add DEFINES QT_DEFINE_GLXFBCONFIG_STRUCT
fi
;;
*)
;;
esac
fi
fi # X11/MINGW OpenGL
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ "$CFG_PHONON" != "no" ]; then
# Always enable Phonon (unless it was explicitly disabled)
CFG_PHONON=yes
fi
if [ "$CFG_COREWLAN" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/mac/corewlan "CoreWlan" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_COREWLAN=yes
else
CFG_COREWLAN=no
fi
fi
fi
# auto-detect OpenGL support (es2 = OpenGL ES 2.x)
if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengldesktop "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_OPENGL=desktop
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_OPENGL=es2
else
if [ "$CFG_OPENGL" = "yes" ]; then
echo "All the OpenGL functionality tests failed!"
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in"
echo " ${XQMAKESPEC}."
exit 1
fi
CFG_OPENGL=no
fi
elif [ "$CFG_OPENGL" = "es2" ]; then
#OpenGL ES 2.x
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists glesv2 2>/dev/null; then
QMAKE_INCDIR_OPENGL_ES2=`$PKG_CONFIG --cflags-only-I glesv2 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'`
QMAKE_LIBDIR_OPENGL_ES2=`$PKG_CONFIG --libs-only-L glesv2 2>/dev/null | sed -e 's,^-L,,g' -e 's, -L, ,g'`
QMAKE_LIBS_OPENGL_ES2=`$PKG_CONFIG --libs glesv2 2>/dev/null`
QMAKE_CFLAGS_OPENGL_ES2=`$PKG_CONFIG --cflags glesv2 2>/dev/null`
QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "$QMAKE_INCDIR_OPENGL_ES2"
QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "$QMAKE_LIBDIR_OPENGL_ES2"
QMakeVar set QMAKE_LIBS_OPENGL_ES2 "$QMAKE_LIBS_OPENGL_ES2"
fi
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_LIBS_OPENGL_ES2 $QMAKE_CFLAGS_OPENGL_ES2
if [ $? != "0" ]; then
echo "The OpenGL ES 2.0 functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_OPENGL_ES2, QMAKE_LIBDIR_OPENGL_ES2 and QMAKE_LIBS_OPENGL_ES2 in"
echo " ${XQMAKESPEC}."
exit 1
fi
elif [ "$CFG_OPENGL" = "desktop" ]; then
# Desktop OpenGL support
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengldesktop "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
if [ $? != "0" ]; then
echo "The OpenGL functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in"
echo " ${XQMAKESPEC}."
exit 1
fi
fi
# auto-detect FontConfig support
if [ "$CFG_FONTCONFIG" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists fontconfig --exists freetype2 2>/dev/null; then
QT_CFLAGS_FONTCONFIG=`$PKG_CONFIG --cflags fontconfig --cflags freetype2 2>/dev/null`
QT_LIBS_FONTCONFIG=`$PKG_CONFIG --libs fontconfig --libs freetype2 2>/dev/null`
else
QT_CFLAGS_FONTCONFIG=
QT_LIBS_FONTCONFIG="-lfreetype -lfontconfig"
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/fontconfig "FontConfig" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_FONTCONFIG $QT_LIBS_FONTCONFIG; then
QT_CONFIG="$QT_CONFIG fontconfig"
QMakeVar set QMAKE_CFLAGS_FONTCONFIG "$QT_CFLAGS_FONTCONFIG"
QMakeVar set QMAKE_LIBS_FONTCONFIG "$QT_LIBS_FONTCONFIG"
CFG_LIBFREETYPE=system
fi
fi
# Save these for a check later
ORIG_CFG_XCB="$CFG_XCB"
ORIG_CFG_EGLFS="$CFG_EGLFS"
if [ "$CFG_LIBUDEV" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists libudev 2>/dev/null; then
QMAKE_INCDIR_LIBUDEV=`$PKG_CONFIG --cflags-only-I libudev 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'`
QMAKE_LIBS_LIBUDEV=`$PKG_CONFIG --libs libudev 2>/dev/null`
QMakeVar set QMAKE_INCDIR_LIBUDEV "$QMAKE_INCDIR_LIBUDEV"
QMakeVar set QMAKE_LIBS_LIBUDEV "$QMAKE_LIBS_LIBUDEV"
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/libudev "libudev" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_INCDIR_LIBUDEV $QMAKE_LIBS_LIBUDEV; then
CFG_LIBUDEV=yes
QT_CONFIG="$QT_CONFIG libudev"
elif [ "$CFG_LIBUDEV" = "yes" ]; then
echo "The libudev functionality test failed!"
exit 1
else
CFG_LIBUDEV=no
QMakeVar add DEFINES QT_NO_LIBUDEV
fi
fi
if [ "$CFG_EVDEV" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/evdev "evdev" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_EVDEV=yes
QT_CONFIG="$QT_CONFIG evdev"
elif [ "$CFG_EVDEV" = "yes" ]; then
echo "The evdev functionality test failed!"
exit 1
else
CFG_EVDEV=no
QMakeVar add DEFINES QT_NO_EVDEV
fi
fi
# Check we actually have X11 :-)
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xlib "XLib" $L_FLAGS $I_FLAGS $l_FLAGS; then
QT_CONFIG="$QT_CONFIG xlib"
fi
# auto-detect Xrender support
if [ "$CFG_XRENDER" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xrender "Xrender" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_XRENDER=yes
QT_CONFIG="$QT_CONFIG xrender"
else
if [ "$CFG_XRENDER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "Xrender support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_XRENDER=no
fi
fi
fi
if [ "$CFG_XCB" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists "xcb >= 1.5" 2>/dev/null; then
QMAKE_CFLAGS_XCB="`$PKG_CONFIG --cflags xcb 2>/dev/null`"
QMAKE_LIBS_XCB="`$PKG_CONFIG --libs xcb 2>/dev/null`"
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb "xcb" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
CFG_XCB=yes
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb-render "xcb-render" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
QT_CONFIG="$QT_CONFIG xcb-render"
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb-poll-for-queued-event "xcb-poll-for-queued-event" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
CFG_XCB_LIMITED=no
QT_CONFIG="$QT_CONFIG xcb-poll-for-queued-event"
fi
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb-xlib "xcb-xlib" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
QT_CONFIG="$QT_CONFIG xcb-xlib"
fi
if [ "$XPLATFORM_MAEMO" = "yes" ]; then
# auto-detect XInput2/Xinput support
if [ "$CFG_XINPUT2" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xinput2 "XInput2" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_XINPUT2=yes
CFG_XINPUT=no
else
if [ "$CFG_XINPUT2" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "XInput2 support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_XINPUT2=no
fi
fi
fi
fi
else
if [ "$CFG_XCB" = "yes" ]; then
echo "The XCB test failed!"
echo " You might need to install dependency packages."
echo " See src/plugins/platforms/xcb/README."
exit 1
fi
CFG_XCB=no
QMakeVar add DEFINES QT_NO_XCB
fi
fi
# Detect libxkbcommon
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists xkbcommon 2>/dev/null; then
QMAKE_CFLAGS_XKBCOMMON="`$PKG_CONFIG --cflags xkbcommon 2>/dev/null`"
QMAKE_LIBS_XKBCOMMON="`$PKG_CONFIG --libs xkbcommon 2>/dev/null`"
QMAKE_CFLAGS_XCB="$QMAKE_CFLAGS_XCB $QMAKE_CFLAGS_XKBCOMMON"
QMAKE_LIBS_XCB="$QMAKE_LIBS_XCB $QMAKE_LIBS_XKBCOMMON"
else
QMAKE_DEFINES_XCB=QT_NO_XCB_XKB
fi
# EGL Support
if [ "$CFG_EGL" != "no" ] && [ "$CFG_OPENGL" != "desktop" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists egl 2>/dev/null; then
QMAKE_INCDIR_EGL=`$PKG_CONFIG --cflags-only-I egl 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'`
QMAKE_LIBS_EGL=`$PKG_CONFIG --libs egl 2>/dev/null`
QMAKE_CFLAGS_EGL=`$PKG_CONFIG --cflags egl 2>/dev/null`
QMakeVar set QMAKE_INCDIR_EGL "$QMAKE_INCDIR_EGL"
QMakeVar set QMAKE_LIBS_EGL "$QMAKE_LIBS_EGL"
fi # detect EGL support
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/qpa/egl" "EGL" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_EGL $QMAKE_LIBS_EGL; then
CFG_EGL=yes
elif [ "$CFG_EGL" = "yes" ]; then
echo " The EGL functionality test failed; EGL is required by some QPA plugins to manage contexts & surfaces."
echo " You might need to modify the include and library search paths by editing"
echo " QMAKE_INCDIR_EGL, QMAKE_LIBDIR_EGL and QMAKE_LIBS_EGL in ${XQMAKESPEC}."
exit 1
else
CFG_EGL=no
fi
elif [ "$CFG_OPENGL" = "desktop" ]; then
if [ "$CFG_EGL" = "yes" ]; then
echo "EGL support was requested but Qt is being configured for desktop OpenGL."
echo "Either disable EGL support or enable OpenGL ES support."
exit 101
fi
CFG_EGL=no
fi
if [ "$CFG_EGLFS" != "no" ]; then
CFG_EGLFS="$CFG_EGL"
fi
if [ -n "$QMAKE_CFLAGS_XCB" ] || [ -n "$QMAKE_LIBS_XCB" ]; then
QMakeVar set QMAKE_CFLAGS_XCB "$QMAKE_CFLAGS_XCB"
QMakeVar set QMAKE_LIBS_XCB "$QMAKE_LIBS_XCB"
QMakeVar set QMAKE_DEFINES_XCB "$QMAKE_DEFINES_XCB"
fi
if [ "$BUILD_ON_MAC" = "yes" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/mac/coreservices "CoreServices" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
QT_CONFIG="$QT_CONFIG coreservices"
else
QMakeVar add DEFINES QT_NO_CORESERVICES
fi
fi
if [ "$BUILD_ON_MAC" = "no" ] && [ "$XPLATFORM_MINGW" = "no" ]; then
if [ "$CFG_XCB" = "no" ] && [ "$CFG_EGLFS" = "no" ]; then
if [ "$QPA_PLATFORM_GUARD" = "yes" ] &&
( [ "$ORIG_CFG_XCB" = "auto" ] || [ "$ORIG_CFG_EGLFS" = "auto" ] ); then
echo "No QPA platform plugin enabled!"
echo " If you really want to build without a QPA platform plugin you must pass"
echo " -no-xcb and -no-eglfs to configure. Doing this will"
echo " produce a Qt that cannot run GUI applications."
echo " The dependencies needed for xcb to build are listed in"
echo " src/plugins/platforms/xcb/README"
exit 1
fi
fi
fi
[ "$XPLATFORM_MINGW" = "yes" ] && [ "$CFG_PHONON" != "no" ] && CFG_PHONON="yes"
# freetype support
[ "$XPLATFORM_MINGW" = "yes" ] && [ "$CFG_LIBFREETYPE" = "auto" ] && CFG_LIBFREETYPE=no
if [ "$CFG_LIBFREETYPE" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/freetype "FreeType" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
CFG_LIBFREETYPE=system
else
CFG_LIBFREETYPE=yes
fi
fi
HAVE_STL=no
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/stl "STL" $L_FLAGS $I_FLAGS $l_FLAGS; then
HAVE_STL=yes
fi
if [ "$CFG_STL" != "no" ]; then
if [ "$HAVE_STL" = "yes" ]; then
CFG_STL=yes
else
if [ "$CFG_STL" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "STL support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_STL=no
fi
fi
fi
# detect POSIX clock_gettime()
if [ "$CFG_CLOCK_GETTIME" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/clock-gettime "POSIX clock_gettime()" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_CLOCK_GETTIME=yes
else
CFG_CLOCK_GETTIME=no
fi
fi
# detect POSIX monotonic clocks
if [ "$CFG_CLOCK_GETTIME" = "yes" ] && [ "$CFG_CLOCK_MONOTONIC" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/clock-monotonic "POSIX Monotonic Clock" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_CLOCK_MONOTONIC=yes
else
CFG_CLOCK_MONOTONIC=no
fi
elif [ "$CFG_CLOCK_GETTIME" = "no" ]; then
CFG_CLOCK_MONOTONIC=no
fi
# detect mremap
if [ "$CFG_MREMAP" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mremap "mremap" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_MREMAP=yes
else
CFG_MREMAP=no
fi
fi
# find if the platform provides getaddrinfo (ipv6 dns lookups)
if [ "$CFG_GETADDRINFO" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/getaddrinfo "getaddrinfo" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_GETADDRINFO=yes
else
if [ "$CFG_GETADDRINFO" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "getaddrinfo support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_GETADDRINFO=no
fi
fi
fi
# find if the platform provides inotify
if [ "$CFG_INOTIFY" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/inotify "inotify" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_INOTIFY=yes
else
if [ "$CFG_INOTIFY" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "inotify support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_INOTIFY=no
fi
fi
fi
# find if the platform provides if_nametoindex (ipv6 interface name support)
if [ "$CFG_IPV6IFNAME" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/ipv6ifname "IPv6 interface name" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_IPV6IFNAME=yes
else
if [ "$CFG_IPV6IFNAME" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "IPv6 interface name support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_IPV6IFNAME=no
fi
fi
fi
# find if the platform provides getifaddrs (network interface enumeration)
if [ "$CFG_GETIFADDRS" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/getifaddrs "getifaddrs" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_GETIFADDRS=yes
else
if [ "$CFG_GETIFADDRS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "getifaddrs support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_GETIFADDRS=no
fi
fi
fi
# detect OpenSSL
if [ "$CFG_OPENSSL" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/openssl "OpenSSL" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
if [ "$CFG_OPENSSL" = "auto" ]; then
CFG_OPENSSL=yes
fi
else
if ( [ "$CFG_OPENSSL" = "yes" ] || [ "$CFG_OPENSSL" = "linked" ] ) && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "OpenSSL support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_OPENSSL=no
fi
fi
fi
# detect PCRE
if [ "$CFG_PCRE" != "qt" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/pcre "PCRE" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_PCRE=system
else
if [ "$CFG_PCRE" = "system" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "PCRE support cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_PCRE=qt
fi
fi
fi
# detect OpenVG support
if [ "$CFG_OPENVG" != "no" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG openvg_on_opengl" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
CFG_OPENVG_ON_OPENGL=yes
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG lower_case_includes" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG (lc includes)" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
CFG_OPENVG_LC_INCLUDES=yes
elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG openvg_on_opengl lower_case_includes" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG (lc includes)" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
CFG_OPENVG_LC_INCLUDES=yes
CFG_OPENVG_ON_OPENGL=yes
else
if [ "$CFG_OPENVG" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "$CFG_OPENVG was specified for OpenVG but cannot be enabled due to functionality tests!"
echo " Turn on verbose messaging (-v) to $0 to see the final report."
echo " If you believe this message is in error you may use the continue"
echo " switch (-continue) to $0 to continue."
exit 101
else
CFG_OPENVG=no
fi
fi
if [ "$CFG_OPENVG" = "yes" ] && "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/shivavg" "ShivaVG" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
CFG_OPENVG_SHIVA=yes
fi
fi
if [ "$CFG_ALSA" = "auto" ]; then
if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/alsa "alsa" $L_FLAGS $I_FLAGS $l_FLAGS; then
CFG_ALSA=yes
else
CFG_ALSA=no
fi
fi
if [ "$CFG_JAVASCRIPTCORE_JIT" = "yes" ] || [ "$CFG_JAVASCRIPTCORE_JIT" = "auto" ]; then
if [ "$CFG_ARCH" = "arm" ]; then
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/javascriptcore-jit "javascriptcore-jit" $L_FLAGS $I_FLAGS $l_FLAGS
if [ $? != "0" ]; then
CFG_JAVASCRIPTCORE_JIT=no
fi
else
case "$XPLATFORM" in
linux-icc*)
CFG_JAVASCRIPTCORE_JIT=no
;;
esac
fi
fi
if [ "$CFG_JAVASCRIPTCORE_JIT" = "yes" ]; then
QMakeVar set JAVASCRIPTCORE_JIT yes
elif [ "$CFG_JAVASCRIPTCORE_JIT" = "no" ]; then
QMakeVar set JAVASCRIPTCORE_JIT no
fi
if [ "$CFG_AUDIO_BACKEND" = "auto" ]; then
CFG_AUDIO_BACKEND=yes
fi
if [ "$CFG_LARGEFILE" != "yes" ] && [ "$XPLATFORM_MINGW" = "yes" ]; then
echo "Warning: largefile support cannot be disabled for win32."
CFG_LARGEFILE="yes"
fi
#-------------------------------------------------------------------------------
# ask for all that hasn't been auto-detected or specified in the arguments
#-------------------------------------------------------------------------------
# enable dwarf2 support on Mac
if [ "$CFG_MAC_DWARF2" = "yes" ]; then
QT_CONFIG="$QT_CONFIG dwarf2"
fi
# Detect the default arch (x86 or x86_64) on Mac OS X
if [ "$BUILD_ON_MAC" = "yes" ] && [ "$QT_CROSS_COMPILE" = "no" ]; then
DEFAULT_ARCH=
case `file "${outpath}/bin/qmake"` in
*i?86)
DEFAULT_ARCH=x86
;;
*x86_64)
DEFAULT_ARCH=x86_64
;;
*ppc|*ppc64|*)
# unsupported/unknown
;;
esac
if [ -n "$DEFAULT_ARCH" ]; then
[ "$OPT_VERBOSE" = "yes" ] && echo "Setting default Mac OS X architechture to $DEFAULT_ARCH."
QT_CONFIG="$QT_CONFIG $DEFAULT_ARCH"
QMAKE_CONFIG="$QMAKE_CONFIG $DEFAULT_ARCH"
# Make the application arch follow the Qt arch
QTCONFIG_CONFIG="$QTCONFIG_CONFIG $DEFAULT_ARCH"
fi
fi
# ### Vestige
if [ "$CFG_PHONON_BACKEND" = "yes" ]; then
QT_CONFIG="$QT_CONFIG phonon-backend"
fi
# disable accessibility
if [ "$CFG_ACCESSIBILITY" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ACCESSIBILITY"
else
QT_CONFIG="$QT_CONFIG accessibility"
fi
# enable egl
if [ "$CFG_EGL" = "yes" ]; then
QT_CONFIG="$QT_CONFIG egl"
else
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_EGL"
fi
# enable eglfs
if [ "$CFG_EGLFS" = "yes" ]; then
QT_CONFIG="$QT_CONFIG eglfs"
else
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_EGLFS"
fi
# enable openvg
if [ "$CFG_OPENVG" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_OPENVG"
else
QT_CONFIG="$QT_CONFIG openvg"
if [ "$CFG_OPENVG_LC_INCLUDES" = "yes" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_LOWER_CASE_VG_INCLUDES"
fi
if [ "$CFG_OPENVG_ON_OPENGL" = "yes" ]; then
QT_CONFIG="$QT_CONFIG openvg_on_opengl"
fi
if [ "$CFG_OPENVG_SHIVA" = "yes" ]; then
QT_CONFIG="$QT_CONFIG shivavg"
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_SHIVAVG"
fi
fi
# enable opengl
if [ "$CFG_OPENGL" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_OPENGL"
else
QT_CONFIG="$QT_CONFIG opengl"
fi
if [ "$CFG_OPENGL" = "es2" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_OPENGL_ES"
fi
if [ "$CFG_OPENGL" = "es2" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_OPENGL_ES_2"
QT_CONFIG="$QT_CONFIG opengles2"
fi
# safe execution environment
if [ "$CFG_SXE" != "no" ]; then
QT_CONFIG="$QT_CONFIG sxe"
fi
# build up the variables for output
if [ "$CFG_DEBUG" = "yes" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}debug"
QMAKE_CONFIG="$QMAKE_CONFIG debug"
elif [ "$CFG_DEBUG" = "no" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}release"
QMAKE_CONFIG="$QMAKE_CONFIG release"
fi
if [ "$CFG_SHARED" = "yes" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}-shared"
QMAKE_CONFIG="$QMAKE_CONFIG shared dll"
elif [ "$CFG_SHARED" = "no" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}-static"
QMAKE_CONFIG="$QMAKE_CONFIG static"
fi
#FIXME: qpa is implicit this should all be removed
QMAKE_CONFIG="$QMAKE_CONFIG qpa"
QT_CONFIG="$QT_CONFIG qpa"
QTCONFIG_CONFIG="$QTCONFIG_CONFIG qpa"
rm -f "src/.moc/$QMAKE_OUTDIR/allmoc.cpp" # needs remaking if config changes
if [ "$XPLATFORM_MINGW" != "yes" ]; then
# Do not set this here for Windows. Let qmake do it so
# debug and release precompiled headers are kept separate.
QMakeVar set PRECOMPILED_DIR ".pch/$QMAKE_OUTDIR"
fi
QMakeVar set OBJECTS_DIR ".obj/$QMAKE_OUTDIR"
QMakeVar set MOC_DIR ".moc/$QMAKE_OUTDIR"
QMakeVar set RCC_DIR ".rcc/$QMAKE_OUTDIR"
QMakeVar set UI_DIR ".uic/$QMAKE_OUTDIR"
if [ "$CFG_LARGEFILE" = "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG largefile"
fi
if [ "$CFG_STL" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_STL"
else
QMAKE_CONFIG="$QMAKE_CONFIG stl"
fi
if [ "$CFG_USE_GNUMAKE" = "yes" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG GNUmake"
fi
[ "$CFG_REDUCE_EXPORTS" = "yes" ] && QT_CONFIG="$QT_CONFIG reduce_exports"
[ "$CFG_REDUCE_RELOCATIONS" = "yes" ] && QT_CONFIG="$QT_CONFIG reduce_relocations"
[ "$CFG_PRECOMPILE" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG precompile_header"
if [ "$CFG_SEPARATE_DEBUG_INFO" = "yes" ]; then
QMakeVar add QMAKE_CFLAGS -g
QMakeVar add QMAKE_CXXFLAGS -g
QT_CONFIG="$QT_CONFIG separate_debug_info"
fi
if [ "$CFG_SEPARATE_DEBUG_INFO_NOCOPY" = "yes" ] ; then
QT_CONFIG="$QT_CONFIG separate_debug_info_nocopy"
fi
[ "$CFG_MMX" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG mmx"
[ "$CFG_3DNOW" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG 3dnow"
[ "$CFG_SSE" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse"
[ "$CFG_SSE2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse2"
[ "$CFG_SSE3" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse3"
[ "$CFG_SSSE3" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG ssse3"
[ "$CFG_SSE4_1" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse4_1"
[ "$CFG_SSE4_2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG sse4_2"
[ "$CFG_AVX" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG avx"
[ "$CFG_IWMMXT" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG iwmmxt"
[ "$CFG_NEON" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG neon"
if [ "$CFG_ARCH" = "mips" ]; then
[ "$CFG_MIPS_DSP" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG mips_dsp"
[ "$CFG_MIPS_DSPR2" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG mips_dspr2"
fi
if [ "$CFG_CLOCK_GETTIME" = "yes" ]; then
QT_CONFIG="$QT_CONFIG clock-gettime"
fi
if [ "$CFG_CLOCK_MONOTONIC" = "yes" ]; then
QT_CONFIG="$QT_CONFIG clock-monotonic"
fi
if [ "$CFG_MREMAP" = "yes" ]; then
QT_CONFIG="$QT_CONFIG mremap"
fi
if [ "$CFG_GETADDRINFO" = "yes" ]; then
QT_CONFIG="$QT_CONFIG getaddrinfo"
fi
if [ "$CFG_IPV6IFNAME" = "yes" ]; then
QT_CONFIG="$QT_CONFIG ipv6ifname"
fi
if [ "$CFG_GETIFADDRS" = "yes" ]; then
QT_CONFIG="$QT_CONFIG getifaddrs"
fi
if [ "$CFG_INOTIFY" = "yes" ]; then
QT_CONFIG="$QT_CONFIG inotify"
fi
if [ "$CFG_LIBJPEG" = "no" ]; then
CFG_JPEG="no"
elif [ "$CFG_LIBJPEG" = "system" ]; then
QT_CONFIG="$QT_CONFIG system-jpeg"
fi
if [ "$CFG_JPEG" = "no" ]; then
QT_CONFIG="$QT_CONFIG no-jpeg"
elif [ "$CFG_JPEG" = "yes" ]; then
QT_CONFIG="$QT_CONFIG jpeg"
fi
if [ "$CFG_LIBPNG" = "no" ]; then
CFG_PNG="no"
fi
if [ "$CFG_LIBPNG" = "system" ]; then
QT_CONFIG="$QT_CONFIG system-png"
fi
if [ "$CFG_PNG" = "no" ]; then
QT_CONFIG="$QT_CONFIG no-png"
elif [ "$CFG_PNG" = "yes" ]; then
QT_CONFIG="$QT_CONFIG png"
fi
if [ "$CFG_GIF" = "no" ]; then
QT_CONFIG="$QT_CONFIG no-gif"
elif [ "$CFG_GIF" = "yes" ]; then
QT_CONFIG="$QT_CONFIG gif"
fi
if [ "$CFG_LIBFREETYPE" = "no" ]; then
QT_CONFIG="$QT_CONFIG no-freetype"
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_FREETYPE"
elif [ "$CFG_LIBFREETYPE" = "system" ]; then
QT_CONFIG="$QT_CONFIG system-freetype"
else
QT_CONFIG="$QT_CONFIG freetype"
fi
if [ "$CFG_GUI" = "auto" ]; then
CFG_GUI="yes"
fi
if [ "$CFG_GUI" = "no" ]; then
QT_CONFIG="$QT_CONFIG no-gui"
CFG_WIDGETS="no"
fi
if [ "$CFG_WIDGETS" = "no" ]; then
QT_CONFIG="$QT_CONFIG no-widgets"
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_WIDGETS"
fi
if [ "x$BUILD_ON_MAC" = "xyes" ] && [ "$XPLATFORM_MINGW" != "yes" ]; then
#On Mac we implicitly link against libz, so we
#never use the 3rdparty stuff.
[ "$CFG_ZLIB" = "yes" ] && CFG_ZLIB="system"
fi
if [ "$CFG_ZLIB" = "yes" ]; then
QT_CONFIG="$QT_CONFIG zlib"
elif [ "$CFG_ZLIB" = "system" ]; then
QT_CONFIG="$QT_CONFIG system-zlib"
fi
[ "$CFG_NIS" = "yes" ] && QT_CONFIG="$QT_CONFIG nis"
[ "$CFG_CUPS" = "yes" ] && QT_CONFIG="$QT_CONFIG cups"
[ "$CFG_ICONV" = "yes" ] && QT_CONFIG="$QT_CONFIG iconv"
[ "$CFG_ICONV" = "sun" ] && QT_CONFIG="$QT_CONFIG sun-libiconv"
[ "$CFG_ICONV" = "gnu" ] && QT_CONFIG="$QT_CONFIG gnu-libiconv"
[ "$CFG_GLIB" = "yes" ] && QT_CONFIG="$QT_CONFIG glib"
[ "$CFG_GSTREAMER" = "yes" ] && QT_CONFIG="$QT_CONFIG gstreamer"
[ "$CFG_DBUS" = "yes" ] && QT_CONFIG="$QT_CONFIG dbus"
[ "$CFG_DBUS" = "linked" ] && QT_CONFIG="$QT_CONFIG dbus dbus-linked"
[ "$CFG_OPENSSL" = "yes" ] && QT_CONFIG="$QT_CONFIG openssl"
[ "$CFG_OPENSSL" = "linked" ] && QT_CONFIG="$QT_CONFIG openssl-linked"
[ "$CFG_MAC_HARFBUZZ" = "yes" ] && QT_CONFIG="$QT_CONFIG harfbuzz"
[ "$CFG_XCB" = "yes" ] && QT_CONFIG="$QT_CONFIG xcb"
[ "$CFG_XINPUT2" = "yes" ] && QT_CONFIG="$QT_CONFIG xinput2"
[ '!' -z "$D_FLAGS" ] && QMakeVar add DEFINES "$D_FLAGS"
[ '!' -z "$L_FLAGS" ] && QMakeVar add QMAKE_LIBDIR_FLAGS "$L_FLAGS"
[ '!' -z "$l_FLAGS" ] && QMakeVar add LIBS "$l_FLAGS"
if [ "$PLATFORM_MAC" = "yes" ] && [ "$QT_CROSS_COMPILE" = "no" ]; then
if [ "$CFG_RPATH" = "yes" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG absolute_library_soname"
# set the default rpath to the library installation directory
RPATH_FLAGS="\"$QT_INSTALL_LIBS\" $RPATH_FLAGS"
fi
elif [ -z "`getXQMakeConf 'QMAKE_(LFLAGS_)?RPATH'`" ]; then
if [ -n "$RPATH_FLAGS" ]; then
echo
echo "ERROR: -R cannot be used on this platform as \$QMAKE_LFLAGS_RPATH is"
echo " undefined."
echo
exit 1
elif [ "$CFG_RPATH" = "yes" ]; then
RPATH_MESSAGE=" NOTE: This platform does not support runtime library paths, using -no-rpath."
CFG_RPATH=no
fi
else
if [ "$CFG_RPATH" = "yes" ]; then
# set the default rpath to the library installation directory
RPATH_FLAGS="\"$QT_INSTALL_LIBS\" $RPATH_FLAGS"
fi
if [ -n "$RPATH_FLAGS" ]; then
# add the user defined rpaths
QMakeVar add QMAKE_RPATHDIR "$RPATH_FLAGS"
fi
fi
if [ '!' -z "$I_FLAGS" ]; then
# add the user define include paths
QMakeVar add QMAKE_CFLAGS "$I_FLAGS"
QMakeVar add QMAKE_CXXFLAGS "$I_FLAGS"
fi
if [ '!' -z "$W_FLAGS" ]; then
# add the user defined warning flags
QMakeVar add QMAKE_CFLAGS_WARN_ON "$W_FLAGS"
QMakeVar add QMAKE_CXXFLAGS_WARN_ON "$W_FLAGS"
QMakeVar add QMAKE_OBJECTIVE_CFLAGS_WARN_ON "$W_FLAGS"
fi
# turn off exceptions for the compilers that support it
if [ "$XPLATFORM" != "$PLATFORM" ]; then
COMPILER=`echo $XPLATFORM | cut -f 2- -d-`
else
COMPILER=`echo $PLATFORM | cut -f 2- -d-`
fi
if [ "$CFG_EXCEPTIONS" != "no" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG exceptions"
fi
if [ "$XPLATFORM_MINGW" = "yes" ]; then
# mkspecs/features/win32/default_pre.prf sets "no-rtti".
# Follow default behavior of configure.exe by overriding with "rtti".
QTCONFIG_CONFIG="$QTCONFIG_CONFIG rtti"
fi
if [ "$CFG_ALSA" = "yes" ]; then
QT_CONFIG="$QT_CONFIG alsa"
fi
if [ "$CFG_PULSEAUDIO" = "yes" ]; then
QT_CONFIG="$QT_CONFIG pulseaudio"
fi
if [ "$CFG_COREWLAN" = "yes" ]; then
QT_CONFIG="$QT_CONFIG corewlan"
fi
if [ "$CFG_ICU" = "yes" ]; then
QT_CONFIG="$QT_CONFIG icu"
fi
if [ "$CFG_FORCE_ASSERTS" = "yes" ]; then
QT_CONFIG="$QT_CONFIG force_asserts"
fi
if [ "$CFG_PCRE" = "qt" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG pcre"
fi
#
# Some Qt modules are too advanced in C++ for some old compilers
# Detect here the platforms where they are known to work.
#
# See Qt documentation for more information on which features are
# supported and on which compilers.
#
canBuildQtConcurrent="yes"
canUseV8Snapshot="yes"
case "$XPLATFORM" in
hpux-g++*)
# PA-RISC's assembly is too limited
# gcc 3.4 on that platform can't build QtXmlPatterns
# the assembly it generates cannot be compiled
# Check gcc's version
case "$(${QMAKE_CONF_COMPILER} -dumpversion)" in
4*)
;;
3.4*)
canBuildQtXmlPatterns="no"
;;
*)
canBuildWebKit="no"
canBuildQtXmlPatterns="no"
;;
esac
;;
unsupported/vxworks-*-g++*)
canBuildWebKit="no"
;;
unsupported/vxworks-*-dcc*)
canBuildWebKit="no"
canBuildQtXmlPatterns="no"
;;
*-g++*)
# Check gcc's version
case "$(${QMAKE_CONF_COMPILER} -dumpversion)" in
4*|3.4*)
;;
3.3*)
canBuildWebKit="no"
;;
*)
canBuildWebKit="no"
canBuildQtXmlPatterns="no"
;;
esac
;;
solaris-cc*)
# Check the compiler version
case `${QMAKE_CONF_COMPILER} -V 2>&1 | awk '{print $4}'` in
5.[012345678])
canBuildWebKit="no"
canBuildQtXmlPatterns="no"
canBuildQtConcurrent="no"
;;
5.*)
canBuildWebKit="no"
canBuildQtConcurrent="no"
;;
esac
;;
hpux-acc*)
canBuildWebKit="no"
canBuildQtXmlPatterns="no"
canBuildQtConcurrent="no"
;;
hpuxi-acc*)
canBuildWebKit="no"
;;
aix-xlc*)
# Get the xlC version
cat > xlcver.c <<EOF
#include <stdio.h>
int main()
{
printf("%d.%d\n", __xlC__ >> 8, __xlC__ & 0xFF);
return 0;
}
EOF
xlcver=
if ${QMAKE_CONF_COMPILER} -o xlcver xlcver.c >/dev/null 2>/dev/null; then
xlcver=`./xlcver 2>/dev/null`
rm -f ./xlcver
fi
if [ "$OPT_VERBOSE" = "yes" ]; then
if [ -n "$xlcver" ]; then
echo Found IBM xlC version: $xlcver.
else
echo Could not determine IBM xlC version, assuming oldest supported.
fi
fi
case "$xlcver" in
[123456].*)
canBuildWebKit="no"
canBuildQtXmlPatterns="no"
canBuildQtConcurrent="no"
;;
*)
canBuildWebKit="no"
canBuildQtConcurrent="no"
;;
esac
;;
irix-cc*)
canBuildWebKit="no"
canBuildQtConcurrent="no"
;;
esac
if [ "$CFG_GUI" = "no" ]; then
# WebKit requires QtGui
canBuildWebKit="no"
fi
if [ "$CFG_SHARED" = "no" ]; then
echo
echo "WARNING: Using static linking will disable the WebKit module."
echo
canBuildWebKit="no"
fi
CFG_CONCURRENT="yes"
if [ "$canBuildQtConcurrent" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CONCURRENT"
CFG_CONCURRENT="no"
else
QT_CONFIG="$QT_CONFIG concurrent"
fi
# ### Vestige
if [ "$CFG_AUDIO_BACKEND" = "yes" ]; then
QT_CONFIG="$QT_CONFIG audio-backend"
fi
# ### Vestige
if [ "$CFG_WEBKIT" = "debug" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG webkit-debug"
fi
# ### Vestige
QT_CONFIG="$QT_CONFIG v8"
# Detect snapshot support
if [ "$CFG_ARCH" != "$CFG_HOST_ARCH" ]; then
case "$CFG_HOST_ARCH,$CFG_ARCH" in
i386,arm)
;;
*) canUseV8Snapshot="no"
;;
esac
else
if [ -n "$_SBOX_DIR" -a "$CFG_ARCH" = "arm" ]; then
# QEMU crashes when building inside Scratchbox with an ARM target
canUseV8Snapshot="no"
fi
fi
if [ "$CFG_V8SNAPSHOT" = "auto" ]; then
CFG_V8SNAPSHOT="$canUseV8Snapshot"
fi
if [ "$CFG_V8SNAPSHOT" = "yes" -a "$canUseV8Snapshot" = "no" ]; then
echo "Error: V8 snapshot was requested, but is not supported on this platform."
exit 1
fi
if [ "$CFG_V8SNAPSHOT" = "yes" ]; then
QT_CONFIG="$QT_CONFIG v8snapshot"
fi
# ### Vestige
if [ "$CFG_DECLARATIVE_DEBUG" = "no" ]; then
QCONFIG_FLAGS="$QCONFIG_FLAGS QDECLARATIVE_NO_DEBUG_PROTOCOL"
fi
if [ "$CFG_EXCEPTIONS" = "no" ]; then
case "$COMPILER" in
g++*)
QMakeVar add QMAKE_CFLAGS -fno-exceptions
QMakeVar add QMAKE_CXXFLAGS -fno-exceptions
QMakeVar add QMAKE_LFLAGS -fno-exceptions
;;
cc*)
case "$PLATFORM" in
irix-cc*)
QMakeVar add QMAKE_CFLAGS -LANG:exceptions=off
QMakeVar add QMAKE_CXXFLAGS -LANG:exceptions=off
QMakeVar add QMAKE_LFLAGS -LANG:exceptions=off
;;
*) ;;
esac
;;
*) ;;
esac
QMAKE_CONFIG="$QMAKE_CONFIG exceptions_off"
fi
case "$COMPILER" in
g++*)
# GNU C++
COMPILER_VERSION=`${QMAKE_CONF_COMPILER} -dumpversion 2>/dev/null`
case "$COMPILER_VERSION" in
*.*.*)
QT_GCC_MAJOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\1,'`
QT_GCC_MINOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\2,'`
QT_GCC_PATCH_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*,\3,'`
;;
*.*)
QT_GCC_MAJOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\).*,\1,'`
QT_GCC_MINOR_VERSION=`echo $COMPILER_VERSION | sed 's,^\([0-9]*\)\.\([0-9]*\).*,\2,'`
QT_GCC_PATCH_VERSION=0
;;
esac
;;
*)
#
;;
esac
#-------------------------------------------------------------------------------
# part of configuration information goes into qconfig.h
#-------------------------------------------------------------------------------
case "$CFG_QCONFIG" in
full)
echo "/* Everything */" >"$outpath/src/corelib/global/qconfig.h.new"
;;
*)
tmpconfig="$outpath/src/corelib/global/qconfig.h.new"
echo "#ifndef QT_BOOTSTRAPPED" >"$tmpconfig"
if [ -f "$relpath/src/corelib/global/qconfig-$CFG_QCONFIG.h" ]; then
cat "$relpath/src/corelib/global/qconfig-$CFG_QCONFIG.h" >>"$tmpconfig"
elif [ -f `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"` ]; then
cat `"$relpath/config.tests/unix/makeabs" "${CFG_QCONFIG}"` >>"$tmpconfig"
fi
echo "#endif" >>"$tmpconfig"
;;
esac
cat >>"$outpath/src/corelib/global/qconfig.h.new" <<EOF
/* Qt Edition */
#ifndef QT_EDITION
# define QT_EDITION $QT_EDITION
#endif
EOF
echo '/* Compile time features */' >>"$outpath/src/corelib/global/qconfig.h.new"
[ '!' -z "$LicenseKeyExt" ] && echo "#define QT_PRODUCT_LICENSEKEY \"$LicenseKeyExt\"" >>"$outpath/src/corelib/global/qconfig.h.new"
if [ "$CFG_LARGEFILE" = "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ]; then
echo "#define QT_LARGEFILE_SUPPORT 64" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
if [ "$CFG_FRAMEWORK" = "yes" ]; then
echo "#define QT_MAC_FRAMEWORK_BUILD" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
if [ "$BUILD_ON_MAC" = "yes" ]; then
cat >>"$outpath/src/corelib/global/qconfig.h.new" <<EOF
#if defined(__LP64__)
# define QT_POINTER_SIZE 8
#else
# define QT_POINTER_SIZE 4
#endif
EOF
else
"$unixtests/ptrsize.test" "$XQMAKESPEC" $OPT_VERBOSE "$relpath" "$outpath"
echo "#define QT_POINTER_SIZE $?" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
#REDUCE_RELOCATIONS is a elf/unix only thing, so not in windows configure.exe
if [ "$CFG_REDUCE_RELOCATIONS" = "yes" ]; then
echo "#define QT_REDUCE_RELOCATIONS" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
echo "" >>"$outpath/src/corelib/global/qconfig.h.new"
if [ "$CFG_DEV" = "yes" ]; then
echo "#define QT_BUILD_INTERNAL" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
# Add QPA to config.h
QCONFIG_FLAGS="$QCONFIG_FLAGS Q_WS_QPA QT_NO_QWS_QPF QT_NO_QWS_QPF2"
if [ "${CFG_USE_FLOATMATH}" = "yes" ]; then
QCONFIG_FLAGS="${QCONFIG_FLAGS} QT_USE_MATH_H_FLOATS"
fi
# Add turned on SQL drivers
for DRIVER in $CFG_SQL_AVAILABLE; do
eval "VAL=\$CFG_SQL_$DRIVER"
case "$VAL" in
qt)
ONDRIVER=`echo $DRIVER | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_SQL_$ONDRIVER"
SQL_DRIVERS="$SQL_DRIVERS $DRIVER"
;;
plugin)
SQL_PLUGINS="$SQL_PLUGINS $DRIVER"
;;
esac
done
QMakeVar set sql-drivers "$SQL_DRIVERS"
QMakeVar set sql-plugins "$SQL_PLUGINS"
# Add other configuration options to the qconfig.h file
[ "$CFG_GIF" = "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_BUILTIN_GIF_READER=1"
[ "$CFG_PNG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_PNG"
[ "$CFG_JPEG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_JPEG"
[ "$CFG_ZLIB" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ZLIB"
[ "$CFG_EXCEPTIONS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_EXCEPTIONS"
[ "$CFG_SXE" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SXE"
[ "$CFG_DBUS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_DBUS"
# X11/Unix/Mac only configs
[ "$CFG_CUPS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CUPS"
[ "$CFG_ICONV" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ICONV"
[ "$CFG_GLIB" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GLIB"
[ "$CFG_GSTREAMER" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GSTREAMER"
[ "$CFG_QGTKSTYLE" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_STYLE_GTK"
[ "$CFG_CLOCK_MONOTONIC" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CLOCK_MONOTONIC"
[ "$CFG_MREMAP" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_MREMAP"
[ "$CFG_GETADDRINFO" = "no" ]&& QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GETADDRINFO"
[ "$CFG_IPV6IFNAME" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IPV6IFNAME"
[ "$CFG_GETIFADDRS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GETIFADDRS"
[ "$CFG_INOTIFY" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_INOTIFY"
[ "$CFG_NIS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_NIS"
[ "$CFG_OPENSSL" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_OPENSSL QT_NO_SSL"
[ "$CFG_OPENSSL" = "linked" ]&& QCONFIG_FLAGS="$QCONFIG_FLAGS QT_LINKED_OPENSSL"
[ "$CFG_SM" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SESSIONMANAGER"
[ "$CFG_XCURSOR" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XCURSOR"
[ "$CFG_XFIXES" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XFIXES"
[ "$CFG_FONTCONFIG" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_FONTCONFIG"
[ "$CFG_XINERAMA" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XINERAMA"
[ "$CFG_XKB" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XKB"
[ "$CFG_XRANDR" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XRANDR"
[ "$CFG_XRENDER" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XRENDER"
[ "$CFG_MITSHM" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_MITSHM"
[ "$CFG_XSHAPE" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SHAPE"
[ "$CFG_XVIDEO" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XVIDEO"
[ "$CFG_XSYNC" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XSYNC"
[ "$CFG_XINPUT" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_XINPUT QT_NO_TABLET"
[ "$CFG_XCURSOR" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XCURSOR"
[ "$CFG_XINERAMA" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XINERAMA"
[ "$CFG_XFIXES" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XFIXES"
[ "$CFG_XRANDR" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XRANDR"
[ "$CFG_XINPUT" = "runtime" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_RUNTIME_XINPUT"
[ "$CFG_ALSA" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ALSA"
[ "$CFG_PULSEAUDIO" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_PULSEAUDIO"
[ "$CFG_COREWLAN" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_COREWLAN"
# sort QCONFIG_FLAGS for neatness if we can
[ '!' -z "$AWK" ] && QCONFIG_FLAGS=`echo $QCONFIG_FLAGS | $AWK '{ gsub(" ", "\n"); print }' | sort | uniq`
QCONFIG_FLAGS=`echo $QCONFIG_FLAGS`
if [ -n "$QCONFIG_FLAGS" ]; then
cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF
#ifndef QT_BOOTSTRAPPED
EOF
for cfg in $QCONFIG_FLAGS; do
cfgd=`echo $cfg | sed 's/=.*$//'` # trim pushed 'Foo=Bar' defines
cfg=`echo $cfg | sed 's/=/ /'` # turn first '=' into a space
# figure out define logic, so we can output the correct
# ifdefs to override the global defines in a project
cfgdNeg=
if [ true ] && echo "$cfgd" | grep 'QT_NO_' >/dev/null 2>&1; then
# QT_NO_option can be forcefully turned on by QT_option
cfgdNeg=`echo $cfgd | sed "s,QT_NO_,QT_,"`
elif [ true ] && echo "$cfgd" | grep 'QT_' >/dev/null 2>&1; then
# QT_option can be forcefully turned off by QT_NO_option
cfgdNeg=`echo $cfgd | sed "s,QT_,QT_NO_,"`
fi
if [ -z $cfgdNeg ]; then
cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF
#ifndef $cfgd
# define $cfg
#endif
EOF
else
cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF
#if defined($cfgd) && defined($cfgdNeg)
# undef $cfgd
#elif !defined($cfgd) && !defined($cfgdNeg)
# define $cfg
#endif
EOF
fi
done
cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF
#endif // QT_BOOTSTRAPPED
EOF
fi
if [ "$CFG_REDUCE_EXPORTS" = "yes" ]; then
cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF
#define QT_VISIBILITY_AVAILABLE
EOF
fi
if [ -n "$QT_LIBINFIX" ]; then
cat >>"$outpath/src/corelib/global/qconfig.h.new" << EOF
#define QT_LIBINFIX "$QT_LIBINFIX"
EOF
fi
# avoid unecessary rebuilds by copying only if qconfig.h has changed
if cmp -s "$outpath/src/corelib/global/qconfig.h" "$outpath/src/corelib/global/qconfig.h.new"; then
rm -f "$outpath/src/corelib/global/qconfig.h.new"
else
[ -f "$outpath/src/corelib/global/qconfig.h" ] && chmod +w "$outpath/src/corelib/global/qconfig.h"
mv "$outpath/src/corelib/global/qconfig.h.new" "$outpath/src/corelib/global/qconfig.h"
chmod -w "$outpath/src/corelib/global/qconfig.h"
if [ ! -f "$outpath/include/QtCore/qconfig.h" ]; then
ln -s "$outpath/src/corelib/global/qconfig.h" "$outpath/include/QtCore/qconfig.h"
fi
fi
#-------------------------------------------------------------------------------
# save configuration into qconfig.pri
#-------------------------------------------------------------------------------
QTCONFIG="$outpath/mkspecs/qconfig.pri"
QTCONFIG_CONFIG="$QTCONFIG_CONFIG no_mocdepend"
[ -f "$QTCONFIG.tmp" ] && rm -f "$QTCONFIG.tmp"
if [ "$CFG_DEBUG" = "yes" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG debug"
if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then
QT_CONFIG="$QT_CONFIG release"
fi
QT_CONFIG="$QT_CONFIG debug"
elif [ "$CFG_DEBUG" = "no" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG release"
if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then
QT_CONFIG="$QT_CONFIG debug"
fi
QT_CONFIG="$QT_CONFIG release"
fi
if [ "$CFG_STL" = "yes" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG stl"
fi
if [ "$CFG_FRAMEWORK" = "no" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG qt_no_framework"
else
QT_CONFIG="$QT_CONFIG qt_framework"
QTCONFIG_CONFIG="$QTCONFIG_CONFIG qt_framework"
fi
if [ "$CFG_DEV" = "yes" ]; then
QT_CONFIG="$QT_CONFIG private_tests"
fi
cat >>"$QTCONFIG.tmp" <<EOF
#configuration
CONFIG += $QTCONFIG_CONFIG
QT_ARCH = $CFG_ARCH
QT_HOST_ARCH = $CFG_HOST_ARCH
QT_EDITION = $Edition
QT_CONFIG += $QT_CONFIG
#versioning
QT_VERSION = $QT_VERSION
QT_MAJOR_VERSION = $QT_MAJOR_VERSION
QT_MINOR_VERSION = $QT_MINOR_VERSION
QT_PATCH_VERSION = $QT_PATCH_VERSION
#namespaces
QT_LIBINFIX = $QT_LIBINFIX
QT_NAMESPACE = $QT_NAMESPACE
EOF
if [ -n "$CFG_SYSROOT" ]; then
echo "# sysroot" >>"$QTCONFIG.tmp"
echo `basename "$XQMAKESPEC"` \{ >>"$QTCONFIG.tmp"
echo " QMAKE_CFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo " QMAKE_CXXFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo " QMAKE_LFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo "}" >> "$QTCONFIG.tmp"
echo >> "$QTCONFIG.tmp"
fi
if [ -n "$RPATH_FLAGS" ]; then
echo "QMAKE_RPATHDIR += $RPATH_FLAGS" >> "$QTCONFIG.tmp"
fi
if [ -n "$QT_GCC_MAJOR_VERSION" ]; then
echo "QT_GCC_MAJOR_VERSION = $QT_GCC_MAJOR_VERSION" >> "$QTCONFIG.tmp"
echo "QT_GCC_MINOR_VERSION = $QT_GCC_MINOR_VERSION" >> "$QTCONFIG.tmp"
echo "QT_GCC_PATCH_VERSION = $QT_GCC_PATCH_VERSION" >> "$QTCONFIG.tmp"
fi
if [ -n "$QMAKE_INCDIR_OPENGL_ES2" ]; then
echo "#Qt opengl include path" >> "$QTCONFIG.tmp"
echo "QMAKE_INCDIR_OPENGL_ES2 = \"$QMAKE_INCDIR_OPENGL_ES2\"" >> "$QTCONFIG.tmp"
fi
# replace qconfig.pri if it differs from the newly created temp file
if cmp -s "$QTCONFIG.tmp" "$QTCONFIG"; then
rm -f "$QTCONFIG.tmp"
else
mv -f "$QTCONFIG.tmp" "$QTCONFIG"
fi
#-------------------------------------------------------------------------------
# save configuration into qmodule.pri
#-------------------------------------------------------------------------------
QTMODULE="$outpath/mkspecs/qmodule.pri"
echo "CONFIG += create_prl link_prl" >> "$QTMODULE.tmp"
# Ensure we can link to uninistalled libraries
if [ "$BUILD_ON_MAC" != "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ] && linkerSupportsFlag -rpath-link "$outpath/lib"; then
echo "QMAKE_LFLAGS = -Wl,-rpath-link,\$\$QT_BUILD_TREE/lib \$\$QMAKE_LFLAGS" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_CFLAGS_PSQL" ]; then
echo "QT_CFLAGS_PSQL = $QT_CFLAGS_PSQL" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_LFLAGS_PSQL" ]; then
echo "QT_LFLAGS_PSQL = $QT_LFLAGS_PSQL" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_CFLAGS_MYSQL" ]; then
echo "QT_CFLAGS_MYSQL = $QT_CFLAGS_MYSQL" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_LFLAGS_MYSQL" ]; then
echo "QT_LFLAGS_MYSQL = $QT_LFLAGS_MYSQL" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_CFLAGS_SQLITE" ]; then
echo "QT_CFLAGS_SQLITE = $QT_CFLAGS_SQLITE" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_LFLAGS_SQLITE" ]; then
echo "QT_LFLAGS_SQLITE = $QT_LFLAGS_SQLITE" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_LFLAGS_ODBC" ]; then
echo "QT_LFLAGS_ODBC = $QT_LFLAGS_ODBC" >> "$QTMODULE.tmp"
fi
if [ -n "$QT_LFLAGS_TDS" ]; then
echo "QT_LFLAGS_TDS = $QT_LFLAGS_TDS" >> "$QTMODULE.tmp"
fi
if [ "$QT_EDITION" != "QT_EDITION_OPENSOURCE" ]; then
echo "DEFINES *= QT_EDITION=QT_EDITION_DESKTOP" >> "$QTMODULE.tmp"
fi
#dump in the OPENSSL_LIBS info
if [ '!' -z "$OPENSSL_LIBS" ]; then
echo "OPENSSL_LIBS = $OPENSSL_LIBS" >> "$QTMODULE.tmp"
elif [ "$CFG_OPENSSL" = "linked" ]; then
echo "OPENSSL_LIBS = -lssl -lcrypto" >> "$QTMODULE.tmp"
fi
#dump in the SDK info
if [ '!' -z "$CFG_SDK" ]; then
echo "QMAKE_MAC_SDK = $CFG_SDK" >> "$QTMODULE.tmp"
fi
# cmdline args
cat "$QMAKE_VARS_FILE" >> "$QTMODULE.tmp"
rm -f "$QMAKE_VARS_FILE" 2>/dev/null
# replace qmodule.pri if it differs from the newly created temp file
if cmp -s "$QTMODULE.tmp" "$QTMODULE"; then
rm -f "$QTMODULE.tmp"
else
mv -f "$QTMODULE.tmp" "$QTMODULE"
fi
#-------------------------------------------------------------------------------
# save configuration into .qmake.cache
#-------------------------------------------------------------------------------
CACHEFILE="$outpath/.qmake.cache"
[ -f "$CACHEFILE.tmp" ] && rm -f "$CACHEFILE.tmp"
cat >>"$CACHEFILE.tmp" <<EOF
#paths
QT_SOURCE_TREE = \$\$quote($relpath)
QT_BUILD_TREE = \$\$quote($outpath)
QT_BUILD_PARTS = $CFG_BUILD_PARTS
#local paths that cannot be queried from the QT_INSTALL_* properties while building QTDIR
QMAKE_INCDIR_QT = \$\$QT_BUILD_TREE/include
QMAKE_LIBDIR_QT = \$\$QT_BUILD_TREE/lib
include(\$\$PWD/mkspecs/qmodule.pri)
CONFIG += $QMAKE_CONFIG dylib depend_includepath fix_output_dirs no_private_qt_headers_warning QTDIR_build
EOF
#dump the qmake spec
if [ -d "$outpath/mkspecs/$XPLATFORM" ]; then
echo "QMAKESPEC = \$\$QT_BUILD_TREE/mkspecs/$XPLATFORM" >> "$CACHEFILE.tmp"
else
echo "QMAKESPEC = $XPLATFORM" >> "$CACHEFILE.tmp"
fi
# replace .qmake.cache if it differs from the newly created temp file
if cmp -s "$CACHEFILE.tmp" "$CACHEFILE"; then
rm -f "$CACHEFILE.tmp"
else
mv -f "$CACHEFILE.tmp" "$CACHEFILE"
fi
#-------------------------------------------------------------------------------
# give feedback on configuration
#-------------------------------------------------------------------------------
case "$COMPILER" in
g++*)
if [ "$CFG_EXCEPTIONS" != "no" ]; then
cat <<EOF
This target is using the GNU C++ compiler ($PLATFORM).
Recent versions of this compiler automatically include code for
exceptions, which increase both the size of the Qt libraries and
the amount of memory taken by your applications.
You may choose to re-run `basename $0` with the -no-exceptions
option to compile Qt without exceptions. This is completely binary
compatible, and existing applications will continue to work.
EOF
fi
;;
cc*)
case "$PLATFORM" in
irix-cc*)
if [ "$CFG_EXCEPTIONS" != "no" ]; then
cat <<EOF
This target is using the MIPSpro C++ compiler ($PLATFORM).
You may choose to re-run `basename $0` with the -no-exceptions
option to compile Qt without exceptions. This will make the
size of the Qt library smaller and reduce the amount of memory
taken by your applications.
EOF
fi
;;
*) ;;
esac
;;
*) ;;
esac
echo
if [ "$XPLATFORM" = "$PLATFORM" ]; then
echo "Build type: $PLATFORM"
else
echo "Building on: $PLATFORM"
echo "Building for: $XPLATFORM"
fi
echo "Architecture: $CFG_ARCH"
echo "Host architecture: $CFG_HOST_ARCH"
if [ -n "$PLATFORM_NOTES" ]; then
echo "Platform notes:"
echo "$PLATFORM_NOTES"
else
echo
fi
if [ "$OPT_VERBOSE" = "yes" ]; then
echo $ECHO_N "qmake vars .......... $ECHO_C"
cat "$QMAKE_VARS_FILE" | tr '\n' ' '
echo "qmake switches ......... $QMAKE_SWITCHES"
fi
echo "Build .................. $CFG_BUILD_PARTS"
echo "Configuration .......... $QMAKE_CONFIG $QT_CONFIG"
if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then
echo "Debug .................. yes (combined)"
if [ "$CFG_DEBUG" = "yes" ]; then
echo "Default Link ........... debug"
else
echo "Default Link ........... release"
fi
else
echo "Debug .................. $CFG_DEBUG"
fi
[ "$CFG_DBUS" = "no" ] && echo "QtDBus module .......... no"
[ "$CFG_DBUS" = "yes" ] && echo "QtDBus module .......... yes (run-time)"
[ "$CFG_DBUS" = "linked" ] && echo "QtDBus module .......... yes (linked)"
echo "QtConcurrent code ...... $CFG_CONCURRENT"
echo "QtGui module ........... $CFG_GUI"
echo "QtWidgets module ....... $CFG_WIDGETS"
if [ "$CFG_JAVASCRIPTCORE_JIT" = "auto" ]; then
echo "JavaScriptCore JIT ..... To be decided by JavaScriptCore"
else
echo "JavaScriptCore JIT ..... $CFG_JAVASCRIPTCORE_JIT"
fi
echo "Declarative debugging ...$CFG_DECLARATIVE_DEBUG"
echo "STL support ............ $CFG_STL"
echo "PCH support ............ $CFG_PRECOMPILE"
if [ "$CFG_ARCH" = "i386" -o "$CFG_ARCH" = "x86_64" ]; then
echo "MMX/3DNOW/SSE/SSE2/SSE3. ${CFG_MMX}/${CFG_3DNOW}/${CFG_SSE}/${CFG_SSE2}/${CFG_SSE3}"
echo "SSSE3/SSE4.1/SSE4.2..... ${CFG_SSSE3}/${CFG_SSE4_1}/${CFG_SSE4_2}"
echo "AVX..................... ${CFG_AVX}"
elif [ "$CFG_ARCH" = "arm" ]; then
echo "iWMMXt support ......... ${CFG_IWMMXT}"
echo "NEON support ........... ${CFG_NEON}"
fi
if [ "$CFG_ARCH" = "mips" ]; then
echo "MIPS_DSP/MIPS_DSPR2..... ${CFG_MIPS_DSP}/${CFG_MIPS_DSPR2}"
fi
echo "IPv6 ifname support .... $CFG_IPV6IFNAME"
echo "getaddrinfo support .... $CFG_GETADDRINFO"
echo "getifaddrs support ..... $CFG_GETIFADDRS"
echo "Accessibility .......... $CFG_ACCESSIBILITY"
echo "NIS support ............ $CFG_NIS"
echo "CUPS support ........... $CFG_CUPS"
echo "Iconv support .......... $CFG_ICONV"
echo "Glib support ........... $CFG_GLIB"
echo "GStreamer support ...... $CFG_GSTREAMER"
echo "PulseAudio support ..... $CFG_PULSEAUDIO"
echo "Large File support ..... $CFG_LARGEFILE"
echo "GIF support ............ $CFG_GIF"
if [ "$CFG_JPEG" = "no" ]; then
echo "JPEG support ........... $CFG_JPEG"
else
echo "JPEG support ........... $CFG_JPEG ($CFG_LIBJPEG)"
fi
if [ "$CFG_PNG" = "no" ]; then
echo "PNG support ............ $CFG_PNG"
else
echo "PNG support ............ $CFG_PNG ($CFG_LIBPNG)"
fi
echo "zlib support ........... $CFG_ZLIB"
echo "Session management ..... $CFG_SM"
echo "libudev support ........ $CFG_LIBUDEV"
if [ "$CFG_OPENGL" = "desktop" ]; then
echo "OpenGL support ......... yes (Desktop OpenGL)"
elif [ "$CFG_OPENGL" = "es2" ]; then
echo "OpenGL support ......... yes (OpenGL ES 2.x)"
else
echo "OpenGL support ......... no"
fi
if [ "$CFG_OPENVG" ]; then
if [ "$CFG_OPENVG_SHIVA" = "yes" ]; then
echo "OpenVG support ......... ShivaVG"
else
echo "OpenVG support ......... $CFG_OPENVG"
fi
fi
echo "XShape support ......... $CFG_XSHAPE"
echo "XVideo support ......... $CFG_XVIDEO"
echo "XSync support .......... $CFG_XSYNC"
echo "Xinerama support ....... $CFG_XINERAMA"
echo "Xcursor support ........ $CFG_XCURSOR"
echo "Xfixes support ......... $CFG_XFIXES"
echo "Xrandr support ......... $CFG_XRANDR"
echo "Xi support ............. $CFG_XINPUT"
echo "MIT-SHM support ........ $CFG_MITSHM"
echo "FontConfig support ..... $CFG_FONTCONFIG"
echo "XKB Support ............ $CFG_XKB"
echo "immodule support ....... $CFG_IM"
echo "GTK theme support ...... $CFG_QGTKSTYLE"
[ "$CFG_SQL_mysql" != "no" ] && echo "MySQL support .......... $CFG_SQL_mysql"
[ "$CFG_SQL_psql" != "no" ] && echo "PostgreSQL support ..... $CFG_SQL_psql"
[ "$CFG_SQL_odbc" != "no" ] && echo "ODBC support ........... $CFG_SQL_odbc"
[ "$CFG_SQL_oci" != "no" ] && echo "OCI support ............ $CFG_SQL_oci"
[ "$CFG_SQL_tds" != "no" ] && echo "TDS support ............ $CFG_SQL_tds"
[ "$CFG_SQL_db2" != "no" ] && echo "DB2 support ............ $CFG_SQL_db2"
[ "$CFG_SQL_ibase" != "no" ] && echo "InterBase support ...... $CFG_SQL_ibase"
[ "$CFG_SQL_sqlite2" != "no" ] && echo "SQLite 2 support ....... $CFG_SQL_sqlite2"
[ "$CFG_SQL_sqlite" != "no" ] && echo "SQLite support ......... $CFG_SQL_sqlite ($CFG_SQLITE)"
OPENSSL_LINKAGE=""
if [ "$CFG_OPENSSL" = "yes" ]; then
OPENSSL_LINKAGE="(run-time)"
elif [ "$CFG_OPENSSL" = "linked" ]; then
OPENSSL_LINKAGE="(linked)"
fi
echo "OpenSSL support ........ $CFG_OPENSSL $OPENSSL_LINKAGE"
echo "Alsa support ........... $CFG_ALSA"
if [ "$BUILD_ON_MAC" = "yes" ]; then
echo "CoreWlan support ....... $CFG_COREWLAN"
fi
echo "libICU support ......... $CFG_ICU"
echo "PCRE support ........... $CFG_PCRE"
if [ "$CFG_XCB_LIMITED" = "yes" ] && [ "$CFG_XCB" = "yes" ]; then
echo "Xcb support ............ limited (old version)"
else
echo "Xcb support ............ $CFG_XCB"
fi
echo "Xrender support ........ $CFG_XRENDER"
if [ "$XPLATFORM_MAEMO" = "yes" ] && [ "$CFG_XCB" = "yes" ]; then
echo "XInput2 support ........ $CFG_XINPUT2"
fi
echo "EGLFS support .......... $CFG_EGLFS"
echo
# complain about not being able to use dynamic plugins if we are using a static build
if [ "$CFG_SHARED" = "no" ]; then
echo
echo "WARNING: Using static linking will disable the use of dynamically"
echo "loaded plugins. Make sure to import all needed static plugins,"
echo "or compile needed modules into the library."
echo
fi
if [ "$CFG_OPENSSL" = "linked" ] && [ "$OPENSSL_LIBS" = "" ]; then
echo
echo "NOTE: When linking against OpenSSL, you can override the default"
echo "library names through OPENSSL_LIBS."
echo "For example:"
echo " OPENSSL_LIBS='-L/opt/ssl/lib -lssl -lcrypto' ./configure -openssl-linked"
echo
fi
if [ "$BUILD_ON_MAC" = "yes" ] && [ "$CFG_FRAMEWORK" = "yes" ] && [ "$CFG_DEBUG" = "yes" ] && [ "$CFG_DEBUG_RELEASE" = "no" ]; then
echo
echo "Error: debug-only framework builds are not supported. Configure with -no-framework"
echo "if you want a pure debug build."
echo
exit 1
fi
sepath=`echo "$relpath" | sed -e 's/\\./\\\\./g'`
PROCS=1
EXEC=""
#-------------------------------------------------------------------------------
# build makefiles based on the configuration
#-------------------------------------------------------------------------------
echo "Finding project files. Please wait..."
if [ "$CFG_NOPROCESS" != "yes" ]; then
"$outpath/bin/qmake" -prl -r "${relpath}/qtbase.pro"
if [ -f "${relpath}/qtbase.pro" ]; then
mkfile="${outpath}/Makefile"
[ -f "$mkfile" ] && chmod +w "$mkfile"
QTDIR="$outpath" "$outpath/bin/qmake" -spec "$XQMAKESPEC" "${relpath}/qtbase.pro" -o "$mkfile"
fi
fi
# .projects -> projects to process
# .projects.1 -> qt and moc
# .projects.2 -> subdirs and libs
# .projects.3 -> the rest
rm -f .projects .projects.1 .projects.2 .projects.3
QMAKE_PROJECTS=`find "$relpath/." -name '*.pro' -print | sed 's-/\./-/-'`
if [ -z "$AWK" ]; then
for p in `echo $QMAKE_PROJECTS`; do
echo "$p" >> .projects
done
else
cat >projects.awk <<EOF
BEGIN {
files = 0
target_file = ""
input_file = ""
first = "./.projects.1.tmp"
second = "./.projects.2.tmp"
third = "./.projects.3.tmp"
}
FNR == 1 {
if ( input_file ) {
if ( ! target_file )
target_file = third
print input_file >target_file
}
matched_target = 0
template_lib = 0
input_file = FILENAME
target_file = ""
}
/^(TARGET.*=)/ {
if ( \$3 == "moc" || \$3 ~ /^Qt/ ) {
target_file = first
matched_target = 1
} else if ( \$3 == "lrelease" || \$3 == "qm_phony_target" ) {
target_file = second
matched_target = 1
}
}
matched_target == 0 && /^(TEMPLATE.*=)/ {
if ( \$3 == "subdirs" )
target_file = second
else if ( \$3 == "lib" )
template_lib = 1
else
target_file = third
}
matched_target == 0 && template_lib == 1 && /^(CONFIG.*=)/ {
if ( \$0 ~ /plugin/ )
target_file = third
else
target_file = second
}
END {
if ( input_file ) {
if ( ! target_file )
target_file = third
print input_file >>target_file
}
}
EOF
rm -f .projects.all
for p in `echo $QMAKE_PROJECTS`; do
echo "$p" >> .projects.all
done
# if you get errors about the length of the command line to awk, change the -l arg
# to split below
split -l 100 .projects.all .projects.all.
for p in .projects.all.*; do
"$AWK" -f projects.awk `cat $p`
[ -f .projects.1.tmp ] && cat .projects.1.tmp >> .projects.1
[ -f .projects.2.tmp ] && cat .projects.2.tmp >> .projects.2
[ -f .projects.3.tmp ] && cat .projects.3.tmp >> .projects.3
rm -f .projects.1.tmp .projects.2.tmp .projects.3.tmp $p
done
rm -f .projects.all* projects.awk
[ -f .projects.1 ] && cat .projects.1 >>.projects
[ -f .projects.2 ] && cat .projects.2 >>.projects
rm -f .projects.1 .projects.2
if [ -f .projects.3 ] && [ "$OPT_FAST" = "no" ]; then
cat .projects.3 >>.projects
rm -f .projects.3
fi
fi
# don't sort Qt and MOC in with the other project files
# also work around a segfaulting uniq(1)
if [ -f .sorted.projects.2 ]; then
sort .sorted.projects.2 > .sorted.projects.2.new
mv -f .sorted.projects.2.new .sorted.projects.2
cat .sorted.projects.2 >> .sorted.projects.1
fi
[ -f .sorted.projects.1 ] && sort .sorted.projects.1 >> .sorted.projects
rm -f .sorted.projects.2 .sorted.projects.1
NORM_PROJECTS=0
FAST_PROJECTS=0
if [ -f .projects ]; then
uniq .projects >.tmp
mv -f .tmp .projects
NORM_PROJECTS=`cat .projects | wc -l | sed -e "s, ,,g"`
fi
if [ -f .projects.3 ]; then
uniq .projects.3 >.tmp
mv -f .tmp .projects.3
FAST_PROJECTS=`cat .projects.3 | wc -l | sed -e "s, ,,g"`
fi
echo " `expr $NORM_PROJECTS + $FAST_PROJECTS` projects found."
echo
PART_ROOTS=
for part in $CFG_BUILD_PARTS; do
case "$part" in
tools) PART_ROOTS="$PART_ROOTS tools" ;;
libs) PART_ROOTS="$PART_ROOTS src" ;;
translations) PART_ROOTS="$PART_ROOTS translations" ;;
examples) PART_ROOTS="$PART_ROOTS examples" ;;
*) ;;
esac
done
if [ "$CFG_DEV" = "yes" ]; then
PART_ROOTS="$PART_ROOTS tests"
fi
echo "Creating makefiles. Please wait..."
for file in .projects .projects.3; do
[ '!' -f "$file" ] && continue
for a in `cat $file`; do
IN_ROOT=no
for r in $PART_ROOTS; do
if echo "$a" | grep "^$r" >/dev/null 2>&1 || echo "$a" | grep "^$relpath/$r" >/dev/null 2>&1; then
IN_ROOT=yes
break
fi
done
[ "$IN_ROOT" = "no" ] && continue
case $a in
*winmain/winmain.pro)
if [ "$CFG_NOPROCESS" = "yes" ] || [ "$XPLATFORM_MINGW" != "yes" ]; then
continue
fi
SPEC=$XQMAKESPEC ;;
*/qmake/qmake.pro) continue ;;
*tools/bootstrap*|*tools/moc*|*tools/rcc*|*tools/uic*|*tools/qdoc*) SPEC=$QMAKESPEC ;;
*) if [ "$CFG_NOPROCESS" = "yes" ]; then
continue
else
SPEC=$XQMAKESPEC
fi;;
esac
dir=`dirname "$a" | sed -e "s;$sepath;.;g"`
test -d "$dir" || mkdir -p "$dir"
OUTDIR="$outpath/$dir"
if [ -f "${OUTDIR}/Makefile" ] && [ "$OPT_FAST" = "yes" ]; then
# fast configure - the makefile exists, skip it
# since the makefile exists, it was generated by qmake, which means we
# can skip it, since qmake has a rule to regenerate the makefile if the .pro
# file changes...
[ "$OPT_VERBOSE" = "yes" ] && echo " skipping $a"
continue;
fi
QMAKE_SPEC_ARGS="-spec $SPEC"
echo $ECHO_N " for $a$ECHO_C"
QMAKE="$outpath/bin/qmake"
QMAKE_ARGS="$QMAKE_SWITCHES $QMAKE_SPEC_ARGS"
if [ "$file" = ".projects.3" ]; then
echo " (fast)"
cat >"${OUTDIR}/Makefile" <<EOF
# ${OUTDIR}/Makefile: generated by configure
#
# WARNING: This makefile will be replaced with a real makefile.
# All changes made to this file will be lost.
EOF
[ "$CFG_DEBUG_RELEASE" = "no" ] && echo "first_target: first" >>${OUTDIR}/Makefile
cat >>"${OUTDIR}/Makefile" <<EOF
QMAKE = "$QMAKE"
all clean install qmake first Makefile: FORCE
\$(QMAKE) $QMAKE_ARGS -o "$OUTDIR" "$a"
cd "$OUTDIR"
\$(MAKE) \$@
FORCE:
EOF
else
if [ "$OPT_VERBOSE" = "yes" ]; then
echo " (`basename $SPEC`)"
echo "$QMAKE" $QMAKE_ARGS -o "$OUTDIR" "$a"
else
echo
fi
[ -f "${OUTDIR}/Makefile" ] && chmod +w "${OUTDIR}/Makefile"
QTDIR="$outpath" "$QMAKE" $QMAKE_ARGS -o "$OUTDIR" "$a"
fi
done
done
rm -f .projects .projects.3
#-------------------------------------------------------------------------------
# check for platforms that we don't yet know about
#-------------------------------------------------------------------------------
if [ "$CFG_ARCH" = "unknown" ]; then
cat <<EOF
NOTICE: configure was unable to determine the architecture
for the $XQMAKESPEC target.
Qt will not use a specialized implementation for any atomic
operations. Instead a generic implemention based on either GCC
intrinsics or C++11 std::atomic<T> will be used (when
available). The generic implementations are generally as fast
as and always as safe as a specialized implementation.
If no generic implementation is available, Qt will use a
fallback UNIX implementation which uses a single
pthread_mutex_t to protect all atomic operations. This
implementation is the slow (but safe) fallback implementation
for architectures Qt does not yet support.
EOF
fi
#-------------------------------------------------------------------------------
# check if the user passed the -no-zlib option, which is no longer supported
#-------------------------------------------------------------------------------
if [ -n "$ZLIB_FORCED" ]; then
which_zlib="supplied"
if [ "$CFG_ZLIB" = "system" ]; then
which_zlib="system"
fi
cat <<EOF
NOTICE: The -no-zlib option was supplied but is no longer
supported.
Qt now requires zlib support in all builds, so the -no-zlib
option was ignored. Qt will be built using the $which_zlib
zlib.
EOF
fi
#-------------------------------------------------------------------------------
# check if the user passed the obsoleted -wayland or -no-wayland flag
#-------------------------------------------------------------------------------
if [ "$CFG_OBSOLETE_WAYLAND" = "yes" ]; then
cat <<EOF
NOTICE: The -wayland and -no-wayland flags are now obsolete
All configuring of QtWayland plugin and QtCompositor happens in the module
EOF
fi
#-------------------------------------------------------------------------------
# check if the user passed the obsoleted -arch or -host-arch options
#-------------------------------------------------------------------------------
if [ "$OPT_OBSOLETE_HOST_ARG" = "yes" ]; then
cat <<EOF
NOTICE: The -arch and -host-arch options are obsolete.
Qt now detects the target and host architectures based on compiler
output. Qt will be built using $CFG_ARCH for the target architecture
and $CFG_HOST_ARCH for the host architecture (note that these two
will be the same unless you are cross-compiling).
EOF
fi
#-------------------------------------------------------------------------------
# finally save the executed command to another script
#-------------------------------------------------------------------------------
if [ `basename $0` != "config.status" ]; then
CONFIG_STATUS="$relpath/$relconf $OPT_CMDLINE"
# add the system variables
for varname in $SYSTEM_VARIABLES; do
cmd=`echo \
'if [ -n "\$'${varname}'" ]; then
CONFIG_STATUS="'${varname}'='"'\\\$${varname}'"' \$CONFIG_STATUS"
fi'`
eval "$cmd"
done
echo "$CONFIG_STATUS" | grep '\-confirm\-license' >/dev/null 2>&1 || CONFIG_STATUS="$CONFIG_STATUS -confirm-license"
[ -f "$outpath/config.status" ] && rm -f "$outpath/config.status"
echo "#!/bin/sh" > "$outpath/config.status"
[ -n "$PKG_CONFIG_SYSROOT_DIR" ] && \
echo "export PKG_CONFIG_SYSROOT_DIR=$PKG_CONFIG_SYSROOT_DIR" >> "$outpath/config.status"
[ -n "$PKG_CONFIG_LIBDIR" ] && \
echo "export PKG_CONFIG_LIBDIR=$PKG_CONFIG_LIBDIR" >> "$outpath/config.status"
echo "if [ \"\$#\" -gt 0 ]; then" >> "$outpath/config.status"
echo " $CONFIG_STATUS \"\$@\"" >> "$outpath/config.status"
echo "else" >> "$outpath/config.status"
echo " $CONFIG_STATUS" >> "$outpath/config.status"
echo "fi" >> "$outpath/config.status"
chmod +x "$outpath/config.status"
fi
if [ -n "$RPATH_MESSAGE" ]; then
echo
echo "$RPATH_MESSAGE"
fi
MAKE=`basename "$MAKE"`
echo
echo Qt is now configured for building. Just run \'$MAKE\'.
if [ "$relpath" = "$QT_INSTALL_PREFIX" ]; then
echo Once everything is built, Qt is installed.
echo You should not run \'$MAKE install\'.
else
echo Once everything is built, you must run \'$MAKE install\'.
echo Qt will be installed into $QT_INSTALL_PREFIX
fi
echo
echo To reconfigure, run \'$MAKE confclean\' and \'configure\'.
echo
Reference in New Issue View Git Blame Copy Permalink