qt5base-lts/cmake/3rdparty/extra-cmake-modules/modules/ECMEnableSanitizers.cmake
Alexandru Croitor 8c1a35a991 CMake: Restore Qt-custom sanitizer additions to ECMEnableSanitizers
Restores addition of 'float-divide-by-zero' to undefined sanitizer
flags as well as the custom fuzzer-no-link option.

Pick-to: 6.2
Task-number: QTBUG-87989
Change-Id: Icde1e5d31083ce1b6128ab45b0e9df5ae69736a3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2021-06-25 12:33:58 +02:00

173 lines
6.0 KiB
CMake

# SPDX-FileCopyrightText: 2014 Mathieu Tarral <mathieu.tarral@gmail.com>
#
# SPDX-License-Identifier: BSD-3-Clause
#[=======================================================================[.rst:
ECMEnableSanitizers
-------------------
Enable compiler sanitizer flags.
The following sanitizers are supported:
- Address Sanitizer
- Memory Sanitizer
- Thread Sanitizer
- Leak Sanitizer
- Undefined Behaviour Sanitizer
All of them are implemented in Clang, depending on your version, and
there is an work in progress in GCC, where some of them are currently
implemented.
This module will check your current compiler version to see if it
supports the sanitizers that you want to enable
Usage
=====
Simply add::
include(ECMEnableSanitizers)
to your ``CMakeLists.txt``. Note that this module is included in
KDECompilerSettings, so projects using that module do not need to also
include this one.
The sanitizers are not enabled by default. Instead, you must set
``ECM_ENABLE_SANITIZERS`` (either in your ``CMakeLists.txt`` or on the
command line) to a semicolon-separated list of sanitizers you wish to enable.
The options are:
- address
- memory
- thread
- leak
- undefined
- fuzzer-no-link
- fuzzer
The sanitizers "address", "memory" and "thread" are mutually exclusive. You
cannot enable two of them in the same build.
"leak" requires the "address" sanitizer.
.. note::
To reduce the overhead induced by the instrumentation of the sanitizers, it
is advised to enable compiler optimizations (``-O1`` or higher).
Example
=======
This is an example of usage::
mkdir build
cd build
cmake -DECM_ENABLE_SANITIZERS='address;leak;undefined' ..
.. note::
Most of the sanitizers will require Clang. To enable it, use::
-DCMAKE_CXX_COMPILER=clang++
Since 1.3.0.
#]=======================================================================]
# MACRO check_compiler_version
#-----------------------------
macro (check_compiler_version gcc_required_version clang_required_version msvc_required_version)
if (
(
CMAKE_CXX_COMPILER_ID MATCHES "GNU"
AND
CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${gcc_required_version}
)
OR
(
CMAKE_CXX_COMPILER_ID MATCHES "Clang"
AND
CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${clang_required_version}
)
OR
(
CMAKE_CXX_COMPILER_ID MATCHES "MSVC"
AND
CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${msvc_required_version}
)
)
# error !
message(FATAL_ERROR "You ask to enable the sanitizer ${CUR_SANITIZER},
but your compiler ${CMAKE_CXX_COMPILER_ID} version ${CMAKE_CXX_COMPILER_VERSION}
does not support it !
You should use at least GCC ${gcc_required_version}, Clang ${clang_required_version}
or MSVC ${msvc_required_version}
(99.99 means not implemented yet)")
endif ()
endmacro ()
# MACRO check_compiler_support
#------------------------------
macro (enable_sanitizer_flags sanitize_option)
if (${sanitize_option} MATCHES "address")
check_compiler_version("4.8" "3.1" "19.28")
if (CMAKE_CXX_COMPILER_ID MATCHES "MSVC")
set(XSAN_COMPILE_FLAGS "-fsanitize=address")
else()
set(XSAN_COMPILE_FLAGS "-fsanitize=address -fno-omit-frame-pointer -fno-optimize-sibling-calls")
set(XSAN_LINKER_FLAGS "asan")
endif()
elseif (${sanitize_option} MATCHES "thread")
check_compiler_version("4.8" "3.1" "99.99")
set(XSAN_COMPILE_FLAGS "-fsanitize=thread")
set(XSAN_LINKER_FLAGS "tsan")
elseif (${sanitize_option} MATCHES "memory")
check_compiler_version("99.99" "3.1" "99.99")
set(XSAN_COMPILE_FLAGS "-fsanitize=memory")
elseif (${sanitize_option} MATCHES "leak")
check_compiler_version("4.9" "3.4" "99.99")
set(XSAN_COMPILE_FLAGS "-fsanitize=leak")
set(XSAN_LINKER_FLAGS "lsan")
elseif (${sanitize_option} MATCHES "undefined")
check_compiler_version("4.9" "3.1" "99.99")
set(XSAN_COMPILE_FLAGS "-fsanitize=undefined -fsanitize=float-divide-by-zero -fno-omit-frame-pointer -fno-optimize-sibling-calls")
elseif (${sanitize_option} MATCHES "fuzzer-no-link")
check_compiler_version("99.99" "6.0" "99.99")
set(XSAN_COMPILE_FLAGS "-fsanitize=fuzzer-no-link")
set(XSAN_LINKER_FLAGS "-fsanitize=fuzzer-no-link")
elseif (${sanitize_option} MATCHES "fuzzer")
check_compiler_version("99.99" "6.0" "99.99")
set(XSAN_COMPILE_FLAGS "-fsanitize=fuzzer")
else ()
message(FATAL_ERROR "Compiler sanitizer option \"${sanitize_option}\" not supported.")
endif ()
endmacro ()
if (ECM_ENABLE_SANITIZERS)
if (CMAKE_CXX_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" OR CMAKE_CXX_COMPILER_ID MATCHES "MSVC")
# for each element of the ECM_ENABLE_SANITIZERS list
foreach ( CUR_SANITIZER ${ECM_ENABLE_SANITIZERS} )
# lowercase filter
string(TOLOWER ${CUR_SANITIZER} CUR_SANITIZER)
# check option and enable appropriate flags
enable_sanitizer_flags ( ${CUR_SANITIZER} )
# TODO: GCC will not link pthread library if enabled ASan
if(CMAKE_C_COMPILER_ID MATCHES "Clang")
set( CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${XSAN_COMPILE_FLAGS}" )
endif()
set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${XSAN_COMPILE_FLAGS}" )
if(CMAKE_CXX_COMPILER_ID MATCHES "GNU")
link_libraries(${XSAN_LINKER_FLAGS})
endif()
if (CMAKE_CXX_COMPILER_ID MATCHES "Clang")
string(REPLACE "-Wl,--no-undefined" "" CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS}")
string(REPLACE "-Wl,--no-undefined" "" CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS}")
endif ()
endforeach()
else()
message(STATUS "Tried to enable sanitizers (-DECM_ENABLE_SANITIZERS=${ECM_ENABLE_SANITIZERS}), \
but compiler (${CMAKE_CXX_COMPILER_ID}) does not have sanitizer support")
endif()
endif()