* In multi-threaded applications, u_init() should be called in the * main thread before starting additional threads, or, alternatively * it can be called in each individual thread once, before other ICU * functions are called in that thread. In this second scenario, the * application must guarantee that the first call to u_init() happen * without contention, in a single thread only. *
* If u_setMemoryFunctions() or
* u_setMutexFunctions are needed (uncommon), they must be
* called _before_ u_init().
*
* Extra, repeated, or otherwise unneeded calls to u_init() do no harm,
* other than taking a small amount of time.
*
* @param status An ICU UErrorCode parameter. It must not be NULL.
* An Error will be returned if some required part of ICU data can not
* be loaded or initialized.
* The function returns immediately if the input error code indicates a
* failure, as usual.
*
* @draft ICU 2.6
*/
U_DRAFT void U_EXPORT2
u_init(UErrorCode *status);
/**
* Clean up the system resources, such as allocated memory or open files,
* used in all ICU libraries. This will free/delete all memory owned by the
* ICU libraries, and return them to their original load state. All open ICU
* items (collators, resource bundles, converters, etc.) must be closed before
* calling this function, otherwise ICU may not free its allocated memory
* (e.g. close your converters and resource bundles before calling this
* function). Generally, this function should be called once just before
* an application exits. For applications that dynamically load and unload
* the ICU libraries (relatively uncommon), u_cleanup() should be called
* just before the library unload.
*
* u_cleanup() is not thread safe. All other threads should stop using ICU * before calling this function. *
* Any open ICU items will be left in an undefined state by u_cleanup(), * and any subsequent attempt to use such an item will give unpredictable * results. *
* After calling u_cleanup(), an application may continue to use ICU by * calling u_init(). An application must invoke u_init() first from one single * thread before allowing other threads call u_init(). All threads existing * at the time of the first thread's call to u_init() must also call * u_init() themselves before continuing with other ICU operations. *
* The use of u_cleanup() just before an application terminates is optional, * but it should be called only once for performance reasons. The primary * benefit is to eliminate reports of memory or resource leaks originating * in ICU code from the results generated by heap analysis tools. *
* Use this function with great care! *
* * @stable ICU 2.0 * @system */ U_STABLE void U_EXPORT2 u_cleanup(void); /** * An opaque pointer type that represents an ICU mutex. * For user-implemented mutexes, the value will typically point to a * struct or object that implements the mutex. * @draft ICU 2.8 * @system */ typedef void *UMTX; /** * Function Pointer type for a user supplied mutex initialization function. * The user-supplied function will be called by ICU whenever ICU needs to create a * new mutex. The function implementation should create a mutex, and store a pointer * to something that uniquely identifies the mutex into the UMTX that is supplied * as a paramter. * @param context user supplied value, obtained from from u_setMutexFunctions(). * @param mutex Receives a pointer that identifies the new mutex. * The mutex init function must set the UMTX to a non-null value. * Subsequent calls by ICU to lock, unlock, or destroy a mutex will * identify the mutex by the UMTX value. * @param status Error status. Report errors back to ICU by setting this variable * with an error code. * @draft ICU 2.8 * @system */ typedef void U_CALLCONV UMtxInitFn (const void *context, UMTX *mutex, UErrorCode* status); /** * Function Pointer type for a user supplied mutex functions. * One of the user-supplied functions with this signature will be called by ICU * whenever ICU needs to lock, unlock, or destroy a mutex. * @param context user supplied value, obtained from from u_setMutexFunctions(). * @param mutex specify the mutex on which to operate. * @draft ICU 2.8 * @system */ typedef void U_CALLCONV UMtxFn (const void *context, UMTX *mutex); /** * Set the functions that ICU will use for mutex operations * Use of this function is optional; by default (without this function), ICU will * directly access system functions for mutex operations * This function can only be used when ICU is in an initial, unused state, before * u_init() has been called. * This function may be used even when ICU has been built without multi-threaded * support (see ICU_USE_THREADS pre-processor variable, umutex.h) * @param context This pointer value will be saved, and then (later) passed as * a parameter to the user-supplied mutex functions each time they * are called. * @param init Pointer to a mutex initialization function. Must be non-null. * @param destroy Pointer to the mutex destroy function. Must be non-null. * @param lock pointer to the mutex lock function. Must be non-null. * @param unlock Pointer to the mutex unlock function. Must be non-null. * @param status Receives error values. * @draft ICU 2.8 * @system */ U_DRAFT void U_EXPORT2 u_setMutexFunctions(const void *context, UMtxInitFn *init, UMtxFn *destroy, UMtxFn *lock, UMtxFn *unlock, UErrorCode *status); /** * Pointer type for a user supplied atomic increment or decrement function. * @param context user supplied value, obtained from from u_setAtomicIncDecFunctions(). * @param p Pointer to a 32 bit int to be incremented or decremented * @return The value of the variable after the inc or dec operation. * @draft ICU 2.8 * @system */ typedef int32_t U_CALLCONV UMtxAtomicFn(const void *context, int32_t *p); /** * Set the functions that ICU will use for atomic increment and decrement of int32_t values. * Use of this function is optional; by default (without this function), ICU will * use its own internal implementation of atomic increment/decrement. * This function can only be used when ICU is in an initial, unused state, before * u_init() has been called. * @param context This pointer value will be saved, and then (later) passed as * a parameter to the increment and decrement functions each time they * are called. This function can only be called * @param inc Pointer to a function to do an atomic increment operation. Must be non-null. * @param dec Pointer to a function to do an atomic decrement operation. Must be non-null. * @param status Receives error values. * @draft ICU 2.8 * @system */ U_DRAFT void U_EXPORT2 u_setAtomicIncDecFunctions(const void *context, UMtxAtomicFn *inc, UMtxAtomicFn *dec, UErrorCode *status); /** * Pointer type for a user supplied memory allocation function. * @param context user supplied value, obtained from from u_setMemoryFunctions(). * @param size The number of bytes to be allocated * @return Pointer to the newly allocated memory, or NULL if the allocation failed. * @draft ICU 2.8 * @system */ typedef void *U_CALLCONV UMemAllocFn(const void *context, size_t size); /** * Pointer type for a user supplied memory re-allocation function. * @param context user supplied value, obtained from from u_setMemoryFunctions(). * @param size The number of bytes to be allocated * @return Pointer to the newly allocated memory, or NULL if the allocation failed. * @draft ICU 2.8 * @system */ typedef void *U_CALLCONV UMemReallocFn(const void *context, void *mem, size_t size); /** * Pointer type for a user supplied memory free function. Behavior should be * similar the standard C library free(). * @param context user supplied value, obtained from from u_setMemoryFunctions(). * @param mem Pointer to the memory block to be resized * @param size The new size for the block * @return Pointer to the resized memory block, or NULL if the resizing failed. * @draft ICU 2.8 * @system */ typedef void U_CALLCONV UMemFreeFn (const void *context, void *mem); /** * Set the functions that ICU will use for memory allocation. * Use of this function is optional; by default (without this function), ICU will * use the standard C library malloc() and free() functions. * This function can only be used when ICU is in an initial, unused state, before * u_init() has been called. * @param context This pointer value will be saved, and then (later) passed as * a parameter to the memory functions each time they * are called. * @param a Pointer to a user-supplied malloc function. * @param r Pointer to a user-supplied realloc function. * @param f Pointer to a user-supplied free function. * @param status Receives error values. * @draft ICU 2.8 * @system */ U_DRAFT void U_EXPORT2 u_setMemoryFunctions(const void *context, UMemAllocFn *a, UMemReallocFn *r, UMemFreeFn *f, UErrorCode *status); #endif